[Q] plz help z4root dont work on my optmus one - Optimus One, P500, V General

[Q] plz help z4root dont work on my optmus one - Optimus One, P500, V General

plz help z4root dont work on my optmus one tried every thing else plz help me rooting my phone

ranjitsmilewithu said:
plz help z4root dont work on my optmus one tried every thing else plz help me rooting my phone
Click to expand...
Click to collapse
From hidden menu 3845#*500# tried to root but no option there like gt540

Replace .APK
ranjitsmilewithu said:
plz help z4root dont work on my optmus one tried every thing else plz help me rooting my phone
Click to expand...
Click to collapse
I had experience about z4root dont work my LGP500. You can download again when you will replacement .APK because its different size 955KB is original.
LINK: z4root.1.3.0.apk 0click here.
I'm not good english. Sorry.

After update of firmware to last version rooting doesn't work. Install older version of firmware.
Sent from my LG-P500 using XDA App

I bought this phone a few days back. Rooted with z4root. Now how can I install megatron rom?
I also want to ask that why the system folder is all cramped up? It had only 3mb free. Whereas on my samsung spica it's always more than 50 mb free?
Now if I remove some apps from system folder and if in future I want to do a factory reset, will it be ok?

z4root din`t work for me. I got root with SuperOneClick http://forum.xda-developers.com/showthread.php?t=803682

I rooted my LGP500 using z4root. I had to reboot after install though.

yabosid said:
I rooted my LGP500 using z4root. I had to reboot after install though.
Click to expand...
Click to collapse
Your Android version is 2.2.1?
I can`t root v.2.2.1.
Please help me, because I want to uninstal a system app. How can I uninstal a system app?

ranjitsmilewithu said:
plz help z4root dont work on my optmus one tried every thing else plz help me rooting my phone
Click to expand...
Click to collapse
check your firmware version.
i.e. v10E can not be rooted
but v10B is ok
downgrade your firmware to the rootable ones.
i suggest going for the custom ROMs: Megatron or Prime v2

married_jedi said:
check your firmware version.
i.e. v10E can not be rooted
but v10B is ok
downgrade your firmware to the rootable ones.
i suggest going for the custom ROMs: Megatron or Prime v2
Click to expand...
Click to collapse
Plz send me link to download custom roms megatron n prime v2 thanks bro

ranjitsmilewithu said:
Plz send me link to download custom roms megatron n prime v2 thanks bro
Click to expand...
Click to collapse
links for ROM's...
Prime ROM - http://forum.xda-developers.com/showthread.php?t=881045
Megatron - http://forum.xda-developers.com/showthread.php?t=870640
Shipped ROM's - http://forum.xda-developers.com/showthread.php?t=865479

How can I downgrade from v2.2.1 to Android version 2.2?
Thanks!

Step By Step: From Non-Rootable to Custom ROM
ranjitsmilewithu said:
Plz send me link to download custom roms megatron n prime v2 thanks bro
Click to expand...
Click to collapse
your first step would be to "downgrade" from non-hackable (v10E) to hackable (v10B or v10C)
I believe I used information from this thread:
http://forum.xda-developers.com/showthread.php?t=875881
NOTE: you need to have the drivers for the phone installed on your PC so be sure to have installed the LG PC Suite (mine came on the stock SD Card)
when you do get to a hackable version, your next step would be to "root" the unit.
simply look for z4root, i used version 1.3.0 I believe.
once rooted, you need to install Custom Recovery
I believe I used information from this thread:
http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
once you have Custom Recovery, perform a NAND Backup. the backup will be stored on your SD Card.
once you have a NAND Backup, copy the entire SD Card to your computer
you are now ready to go to Custom ROMS. I used Megatron.
I followed the instruction on the thread below:
http://forum.xda-developers.com/showthread.php?t=870640
--------------------------------------------------
I have compiled some notes while experimenting with my LG-P500.
It can be found here: USE AT YOUR OWN RISK!
http://www.google.com/notebook/public/06042548804949147685/BDQzdDAoQ967kstMl
--------------------------------------------------
For your info, I have gone from: v10B --> v10E --> v10B --> Megatron --> V10C --> Megatron with these procedures. Just be careful when you are following the instructions and take things slowly. Keep notes too so you wont get lost.
Thanks for hitting the "Thanks" Button That energized me to write this long post.

married_jedi said:
your first step would be to "downgrade" from non-hackable (v10E) to hackable (v10B or v10C)
I believe I used information from this thread:
http://forum.xda-developers.com/showthread.php?t=875881
NOTE: you need to have the drivers for the phone installed on your PC so be sure to have installed the LG PC Suite (mine came on the stock SD Card)
when you do get to a hackable version, your next step would be to "root" the unit.
simply look for z4root, i used version 1.3.0 I believe.
once rooted, you need to install Custom Recovery
I believe I used information from this thread:
http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
once you have Custom Recovery, perform a NAND Backup. the backup will be stored on your SD Card.
once you have a NAND Backup, copy the entire SD Card to your computer
you are now ready to go to Custom ROMS. I used Megatron.
I followed the instruction on the thread below:
http://forum.xda-developers.com/showthread.php?t=870640
--------------------------------------------------
I have compiled some notes while experimenting with my LG-P500.
It can be found here: USE AT YOUR OWN RISK!
http://www.google.com/notebook/public/06042548804949147685/BDQzdDAoQ967kstMl
--------------------------------------------------
For your info, I have gone from: v10B --> v10E --> v10B --> Megatron --> V10C --> Megatron with these procedures. Just be careful when you are following the instructions and take things slowly. Keep notes too so you wont get lost.
Thanks for hitting the "Thanks" Button That energized me to write this long post.
Click to expand...
Click to collapse
Thanks for the effort

Related

Generic 2.0.2.A.0.24 firmware (21/12/2010) | rooted | for xRecovery + X10flasher

Hi guys, here's the latest firmware by SE. Since it's not possible to root it with any known method, I prepared update.zip to be flashed with xRecovery
The firmware comes pre-rooted, with busybox and xRecovery pre-installed.
You need rooted 2.1 rom with xRecovery working to install this firmware!
If you already flashed the latest firmware with SEUS, please downgrade OR root it using THIS thread.
1. Download and unpack the file. It contains 2 files: update.zip and 2.0.2.A.0.24_for_X10-flasher.tar.bz2
2. Copy update.zip to SD Card
3. Boot into xRecovery and install update.zip
4. Turn off phone / remove battery
5. Unpack the 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash the SIN files with X10-flasher
6. Enjoy!
Make sure you understand the installation process before you try!
Download: 2.0.2.A.0.24-rooted-zdz.tar.bz2
If you don't have loader.sin, please find it here (thanks pedrocel85)
Enable JIT v2: http://forum.xda-developers.com/showpost.php?p=10058308&postcount=1
Cheers!
zdzihu

Maybe get JIT pre-installed?

Wow, that was fast solution !
Thanks zdzihu !

can someone please help me.
Ive download the file attached and got x10flasher too but i dont understand step 5. Where do i get that file?

Hi there.
Is there any images of this firmware?
Is ir all working?
Sent from my X10i using XDA App

soldiers33 said:
can someone please help me.
Ive download the file attached and got x10flasher too but i dont understand step 5. Where do i get that file?
Click to expand...
Click to collapse
Where exactly on the OP did you see anything about the x10flasher!??
It says F O R x R E C O V E R Y...!!
Read the post carefully , follow the steps to the letter , its idiot proof , you CAN'T mess this up!

Mr_Element said:
Where exactly on the OP did you see anything about the x10flasher!??
It says F O R x R E C O V E R Y...!!
Read the post carefully , follow the steps to the letter , its idiot proof , you CAN'T mess this up!
Click to expand...
Click to collapse
I'm guessing he saw it here;
'5. Unpack of 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash it using with X10-flasher'

Hey guy first of all I wish a Merry Christmas to all this amazing XDA community....
In topic: I'm assuming that the improvements of this new release are related to the /system folder so could it be possible to flash this new version and after that do a restore of my backup of the /data folder only using xrecovery?? It's just a thought so I don't loose my apps and stuff and I will not have to re do my titanium back up all over again.....
Jim
Sent from my X10i

jimbo77 said:
Hey guy first of all I wish a Merry Christmas to all this amazing XDA community....
In topic: I'm assuming that the improvements of this new release are related to the /system folder so could it be possible to flash this new version and after that do a restore of my backup of the /data folder only using xrecovery?? It's just a thought so I don't loose my apps and stuff and I will not have to re do my titanium back up all over again.....
Jim
Sent from my X10i
Click to expand...
Click to collapse
There is also a new kernel and baseband (see step 5). To be honest, restoring backup with xRecovery will work, but I'd also recommend backing up with Titanium (to be 100% safe).

ok so ive figured it out but the files dont have a loader.sin so i cant continue with the flasher!!!!

zdzihu said:
There is also a new kernel and baseband (see step 5). To be honest, restoring backup with xRecovery will work, but I'd also recommend backing up with Titanium (to be 100% safe).
Click to expand...
Click to collapse
Ok thanks a lot sir... I will try and post later with results...
Jim

superleeds27 said:
I'm guessing he saw it here;
'5. Unpack of 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash it using with X10-flasher'
Click to expand...
Click to collapse
Yep. That line has me a tad confused too.
That means that zip can be flashed just by booting into xRecovery, and of one doesn't have xRecovery, then they can simply extract the files and flash using the Flash Tool - right?

yea im also confused by step 5.

Is it possible to install JIT?
If yes, I might try it soon.

I cant install xrecovery, already have the latest FW force closes, assuming it needs root already to install?

Flo95 said:
Is it possible to install JIT?
If yes, I might try it soon.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=885977
go3asy said:
I cant install xrecovery, already have the latest FW force closes, assuming it needs root already to install?
Click to expand...
Click to collapse
Correct ^
Cheers,
z

any other options, pone isnt found with x10 flasher in flash mode but fine in SEUS, so cant even get back to generic old 2.1

Probably stupid question, sorry if it is (had no experience in recovery before), but if I install this FW, would my apps/settings remain, or will it make my phone cleared?

I'd lile to know that, too.

hi zdzihu.
please help me :
http://forum.xda-developers.com/showthread.php?t=885973

[Q] [HELP] Official LG Updater over ClockWorkMod Recovery

I have an LG Optimus One running 2.2.2 latest firmware V10e. Recently, I rooted my device and installed ClockWorkMod Recovery and the Lagfix+OC Kernel by der_caverman. I am using the Stock ROM with that Kernel.
My question is when the official Gingerbread Update comes out by LG, will I be able to update it with the official LG software updater or will it not work because I have ClockWorkMod Recovery installed.
If not, how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!

I already asked the same question
the thread: http://forum.xda-developers.com/showthread.php?t=1102423
the solution: http://forum.xda-developers.com/showthread.php?p=13396506#post13396506
good luck

lonerguy said:
how can I remove ClockWorkMod Recovery get my original Recovery Back???
any help would be appreciated!
Click to expand...
Click to collapse
go to http://forum.xda-developers.com/showthread.php?t=1065197
or
http://www.megaupload.com/?f=XGKNWZQJ
you can just flash any recovery given above.its a zip file just flash the zip as you flash roms.one of the links contains original recovery for p500.

thanks...it worked
thank you guys...

If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks

siva-kumar said:
If the phone is just 'rooted' and no custom ROM, would one need to follow the above steps before upgrading? Thanks
Click to expand...
Click to collapse
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
its alwayes advisable to have a custom recovery and custom rom. cause it can take nandroid backups(will save your day if anything goes wrong)

josinpaul said:
nope. you can upgrade at any time if u are staying with ur oem rom even if u are rooted. only thing is that u will lose ur root previllage after the update.
Click to expand...
Click to collapse
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).

zekozeko said:
Can you please tell me can I upgrade without doing anything??? I have rooted my phone and installed AmonRa recovery, and I'm on stock rom 2.2.2 10e (I have just flashed some framework that I made on UOT kitchen).
Click to expand...
Click to collapse
it is risky since you have changed the frame work.if i were you i will do the following.
1)unroot the phone( if u have used gingerbreak use the same to unroot)
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash. thus u can getrid of amonra and get back original p500 recovery
3)reboot and hard reset and upgrade.
4) since u are now on original recovery and in unrooted condition if any thing goes wrong u can claim warrenty.

let me ask u why u need an upgrade? to get lot of crapwares? or to get amere 600mhz kernal? or to get a laggy phone with mere 60 mb of internal storage space to install all ur apps? or to have adds on every apps?
go for http://forum.xda-developers.com/showthread.php?t=946354
its stable,beautiful,oced and updated gingerbread.

Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...

zekozeko said:
Thanks for your answer!
And I understand you when you ask me why do I need official update, because I agree that official rom = creap And thats why the first thing that I have done when I rooted my phone was to uninstall all the bloatware from it
I will for sure flash miks rom when he base it on official gingerbread, and if I have a little time for weekend current mod that you recommended (I only hesitate because of the bugs - I know there are just a couple of them, but...). I tried yesterday francos kernel v151, but I'm experiencing color bending in lower half of a screen with it...
Click to expand...
Click to collapse
ya its up to you to decide...and i agree with u absolutly.but i aint had any problems with mik's 6.5.2(not using francos ker cause some error with cpu freq settings, u have to use setcpu).

Just one more question - when you said:
2)down load the original recovery from http://www.megaupload.com/?f=XGKNWZQJ and flash.
Click to expand...
Click to collapse
you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry

zekozeko said:
Just one more question - when you said: you mean to flash it from amonra recovery, right? (I know, it's a noob question, but better to be safe then sorry
Click to expand...
Click to collapse
yes its a flashable unsigned zip.but if u r using amonra to flash( cause it is unsigned) u have to uncheck the option "toggle signature verify" first.Amonra wont allow u to flash unsigned zips unless u do the above.
ps:if original recovery is flashed u will lose all the options in amonra and the only option will be the hard reset option.
there is a good how to section if u wish...
http://tablet-crunch.blogspot.com/2011/01/lg-optimus-t-rooting-recovery-rom.html
http://forum.xda-developers.com/showthread.php?t=1007244
http://forum.xda-developers.com/showthread.php?t=901247

I'm Newbie, and I'm using LG Optimus Z ( know as LG KU9500/SU950 ). I want install ClockworkMod to recovery rom. It run android 2.2.2
Show me please.
Thanks every one very much.....

Hi! I'm newbie i wanna ask some question !

hello everybody here,I have just bought new LG P500 and now i want to do some thing with this:
- Root deveice.
- How to install clockworkmod
- Install new custom rom with Clockworkmod recovery or Xrecovery. And what's the best rom for this mobile !
Please show the link for me with some instructions how to do three thinks above. Thanks for advanced !

Just read the how-to.
How hard is it to just use search???

http://www.youtube.com/watch?v=JmvCpR45LKA

1. This is a dev forum.
2. This topics go in the general section.
3. Use the search function.

Root your device with gingerbreak.apk(for 2.2.1,2.2.2) or z4root v1.3.0(for 2.2),download rom manager free from market,run it and give superuser permissions and install clockworkmod recovery , BTW this is not the right place ask questions,better you can post thread in general forum
IF you are completely a noob,goto
http://forum.xda-developers.com/showthread.php?t=901247 and
http://forum.xda-developers.com/showthread.php?t=1007244

kamalnath said:
Root your device with gingerbreak.apk(for 2.2.1,2.2.2) or z4root v1.3.0(for 2.2),download rom manager free from market,run it and give superuser permissions and install clockworkmod recovery , BTW this is not the right place ask questions,better you can post thread in general forum
IF you are completely a noob,goto
http://forum.xda-developers.com/showthread.php?t=901247 and
http://forum.xda-developers.com/showthread.php?t=1007244
Click to expand...
Click to collapse
Can i root mine with SuperOneClick 1.9.1 ? And what the link to download gingerbreak.apk
Thanks for all user !

quangnhut123 said:
Can i root mine with SuperOneClick 1.9.1 ? And what the link to download gingerbreak.apk
Thanks for all user !
Click to expand...
Click to collapse
Here is the link for gingerbreak
http://forum.xda-developers.com/showthread.php?t=1044765
BTW,wat version of froyo you are using????

kamalnath said:
Here is the link for gingerbreak
http://forum.xda-developers.com/showthread.php?t=1044765
BTW,wat version of froyo you are using????
Click to expand...
Click to collapse
I use stock rom and not yet update new version from LG
And now i see 2.2 froyo

quangnhut123 said:
I use stock rom and not yet update new version from LG
And now i see 2.2 froyo
Click to expand...
Click to collapse
There are updates but dont use them,2.2 is very stable and you can root it with z4root,u can also root it with superoneclick , but iam lit bit lazy,if you want official 2.3 gingerbread release from LG wait for it,if not then go for unofficial devoid.froyo final(best froyo rom) or mik's cm7 port(best gingerbread rom)
PS: (warranty void if you have rooted your device)

quangnhut123 said:
hello everybody here,I have just bought new LG P500 and now i want to do some thing with this:
- Root deveice.
- How to install clockworkmod
- Install new custom rom with Clockworkmod recovery or Xrecovery. And what's the best rom for this mobile !
Please show the link for me with some instructions how to do three thinks above. Thanks for advanced !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1038338 solves all ur query

[Q] Root & Unlock for AsianRetail

Hye Expert.. i wanna ask a few question that i still confused about it.. plz give me a solution
im using Atrix non 4G 4.3.13.AsiaRetail
1)can be unlocked with same method like AT&T?
2)if im unlocking, can i get Custom ROM with any version?
3)its possible if i change system version to 4.1.83 using pudding?
4)i didnt find step to use pudding software, whats tool needed and how to use it?

still no lucky

Thought of getting one of the atrix. Looking at the upgrade of gingerbread makes me wanting this phone more, but Singapore local sets are all brand unlocked. Only bootloader is still locked. I assume we could flash our local sets to AT&T then unlock the carrier, then upgrade to 2.3.4?
Can any guys help?

Do NOT flash AT&T software, this will BRICK your phone!
For root, GingerBreak worked for me.
There are two type of unlock, CARRIER unlock and BOOTLOADER unlock.
All phones sold in singapore must be CARRIER unlocked by law.
As for BOOTLOADER unlock, use this link and flash the INTERNTIONAL/BELL version NOT the AT&T version.
Do you need step by step instructions for bootloader unlock?
@trinityb4
In reply to your other post, the safest way to get Gingerbread now is to
1.Unlock bootloader
2.CWM
3.Custom ROM =D
NEVER NEVER NEVER flash an AT&T .sbf file! Their Atrix is slightly different!

don't root on asia retail 3.1.0 or 3.1.3 .. i got my internal-sd formatted by itself after ramdom reboots (not rooting on 1st time)
but i got the rooting fine on stock rom if i flash to other europe rom such as Orange UK 4.20, Spain retail 4.33 etc..
i got no idea why but i try numerous time on with asia retail seems to have this problem but no problem with stock european roms.
best is to unlock bl and flash to att 4.59.1 with rooting

trinityb4 said:
Thought of getting one of the atrix. Looking at the upgrade of gingerbread makes me wanting this phone more, but Singapore local sets are all brand unlocked. Only bootloader is still locked. I assume we could flash our local sets to AT&T then unlock the carrier, then upgrade to 2.3.4?
Can any guys help?
Click to expand...
Click to collapse
we can't flash stock att 2.3.4 rom like this, RSD wont't allow to. we got to go by unlock way and flash tenfar's recovery in and cwm custom att 2.3.4.

pennzoilgtr said:
don't root on asia retail 3.1.0 or 3.1.3 .. i got my internal-sd formatted by itself after ramdom reboots (not rooting on 1st time)
but i got the rooting fine on stock rom if i flash to other europe rom such as Orange UK 4.20, Spain retail 4.33 etc..
i got no idea why but i try numerous time on with asia retail seems to have this problem but no problem with stock european roms.
best is to unlock bl and flash to att 4.59.1 with rooting
Click to expand...
Click to collapse
so its working if my version 4.3.13 flash to Att 4.59.1
and the step should i use is
1)Unlock bootloader using international
2)install CWM
3)install 4.59.1? with tools?

raunamaxtor said:
so its working if my version 4.3.13 flash to Att 4.59.1
and the step should i use is
1)Unlock bootloader using international
2)install CWM
3)install 4.59.1? with tools?
Click to expand...
Click to collapse
Thanks Guys!
So now i have it. The Atrix
version.4.3.13.MB860.AsianRetail.en.03
Android ver - 2.2.2
Baseband ver - N_01.95.00R
Kernel ver - 2.6.32.9
[email protected] #1
SMP PREEMPT Tue Jun 21 18:05:24 CST 2011
Build # - OLYEM_U4_3.1.3
Guys, what should i do now?
Should i charge the phone and do a fastboot (vol down + power button) select vol up on fastboot on the phone top screen, open cmd and carry on with the unlock bootloader thing?
i saw the tutorial on youtube. should i follow the steps?
i dont really want to hard brick this phone cos i luvin it.
and really need to upgrade to gingerbread for faster browsing speed and such.
hope you great people can help me through it, thank!
matthew yes i need your help!!!!

http://forum.xda-developers.com/showthread.php?t=1136261
Please follow all the step state in above treat. If u follow exactly, it will be successful. I am using Singapore starhub atrix & unlocked with those method from above link. Now I am using dark side 1.3 with faux kernel.
Sent from my MB860 using Tapatalk

pswin09 said:
http://forum.xda-developers.com/showthread.php?t=1136261
Please follow all the step state in above treat. If u follow exactly, it will be successful. I am using Singapore starhub atrix & unlocked with those method from above link. Now I am using dark side 1.3 with faux kernel.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Gee Thanks pswin.
i'll try it soon.

trinityb4 said:
Gee Thanks pswin.
i'll try it soon.
Click to expand...
Click to collapse
Hi Guys!
Bootloader had been unlock sucessfully! yes!!!
now bros, can anyone suggest how to upgrade to gingerbread roms? cos i'm really sick of 2.2.2.
Many thanks!

trinityb4 said:
Hi Guys!
Bootloader had been unlock sucessfully! yes!!!
now bros, can anyone suggest how to upgrade to gingerbread roms? cos i'm really sick of 2.2.2.
Many thanks!
Click to expand...
Click to collapse
Flash any custom roms in development treat. I already tried all roms (including fruit cakes 2.3.4 roms). I prefer dark side v1. 3 & alien v4 for daily use. Other roms also good but I like blur gb & launcher. The best thing is please read this treat for reference.
http://forum.xda-developers.com/showthread.php?t=1154600
Sent from my MB860 using Tapatalk

Be sure to use proper kernel while flashing roms. Latest roms already support for international. Must thank to Dev's.

trinityb4 said:
Gee Thanks pswin.
i'll try it soon.
Click to expand...
Click to collapse
pswin09 said:
Be sure to use proper kernel while flashing roms. Latest roms already support for international. Must thank to Dev's.
Click to expand...
Click to collapse
Hi pswin09, thanks for the info. +1 for you.
so now how did you get to flash the 2.3.4 roms? and how about the kernel?
since now i had already unlocked the boot, i seen on youtube sayig flash using sd card? i still not sure.
guess i'm like you loving the stock gingerbread new blur look like if its stock 2.3.4. help me out with this pls.
so btw are u on line?

Mine is doing well with Alien #4 very well at this moment. I think i'll stick to this ROM till official CM7 for Atrix is released.
Kernel for international version is already included so you don't need to worry about that

spiderx_mm said:
Mine is doing well with Alien #4 very well at this moment. I think i'll stick to this ROM till official CM7 for Atrix is released.
Kernel for international version is already included so you don't need to worry about that
Click to expand...
Click to collapse
Hi spiderx, can you tell me what should i use to flash into the ninja rom?
eg. wat should i download?
much thanks.

6
trinityb4 said:
Hi spiderx, can you tell me what should i use to flash into the ninja rom?
eg. wat should i download?
much thanks.
Click to expand...
Click to collapse
Hey, first you must install cmw recovery on your phone.
http://forum.xda-developers.com/showthread.php?t=1156040
Second must download latest ninja rom v 0.45 full & kernel to your SD card.
http://forum.xda-developers.com/showthread.php?t=1173843
Kernel please select v 0.1.7 for international below
http://forum.xda-developers.com/showthread.php?t=1156040
Third reboot your phone to cmw recovery and follow below instruction.
1 : wipe data factory reset (use volume button to scroll down. Use power button or search button to select.
2 : wipe cache partition
3 : choose install zip from SD card
4 : choose rom zip file in SD card and scroll down to yes & select yes. (Will take 2 to 5 minute, be patient) . For karnel also follow this step
5 : After finished press reboot system now.
After reboot u will see the change.
Sent from my MB860 using Tapatalk

pswin09 said:
6
Hey, first you must install cmw recovery on your phone.
http://forum.xda-developers.com/showthread.php?t=1156040
Second must download latest ninja rom v 0.45 full & kernel to your SD card.
http://forum.xda-developers.com/showthread.php?t=1173843
Kernel please select v 0.1.7 for international below
http://forum.xda-developers.com/showthread.php?t=1156040
Third reboot your phone to cmw recovery and follow below instruction.
1 : wipe data factory reset (use volume button to scroll down. Use power button or search button to select.
2 : wipe cache partition
3 : choose install zip from SD card
4 : choose rom zip file in SD card and scroll down to yes & select yes. (Will take 2 to 5 minute, be patient) . For karnel also follow this step
5 : After finished press reboot system now.
After reboot u will see the change.
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Good stuff!
i saw the video in youtube.
will carry on cmw then flash... to ninja rom, then kernel.., then bang!
gingerbread here i come...
Thanks! You guys have been a great!
I will report back once it's done.

Dear pswin09,
Found my answer already...

Hi guru,
I had download the cmw file extracted it, renamed recovery.img (as in short recovery) and put it into my c drive without folder.
Then i run cmd prompt
C:\Users\vaio>cd c:\atrix <enter>
c:\atrix>fastboot flash recovery recovery.img <enter>
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
what went wrong?
edit; ok i did not root the phone.
now i've rooted it with gingerbreak and try again to see the outcome.

[Q] cannot entry xrecovery

Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.

vasek2 said:
Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.
Click to expand...
Click to collapse
Try to use "Flashtool": http://forum.xda-developers.com/showthread.php?t=928343
I had problems when tried using the new version (0.9.9.0) of Flashtool with my X10 mini (E10) .
I tried the older V0.8.6.0 and it went smoothly!
I also did complete factory reinstall with SEUS. Not sure it was necessary but if you do- make a full backup before!

problems with flashing SE x10 mini pro
orlev1 said:
Try to use "Flashtool": http://forum.xda-developers.com/showthread.php?t=928343
I had problems when tried using the new version (0.9.9.0) of Flashtool with my X10 mini (E10) .
I tried the older V0.8.6.0 and it went smoothly!
I also did complete factory reinstall with SEUS. Not sure it was necessary but if you do- make a full backup before!
Click to expand...
Click to collapse
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...

vasek2 said:
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...
Click to expand...
Click to collapse
Well, you didn't have to flash anything, just press the +-button to install xrecovery to your phone and follow the instructions

vasek2 said:
Hey guys,
I rooted (by super click, confirmed by root checker) and installed (busy box) and move (three files of excovery,busy box and chargemon to system/bin cmod 7777) all what is necessary by
ijustutter.com
But, I cannot entry to xrecovery to flash new ROM, I was trying to push back button several times by appearing Sony Ericcson letters, but impossibel to entry,
Please help, it is my wife's phone, I should do it.
Model: SE X10 mini pro, 2.1 update 1, kernel 2.6.29, 2.1.1.A.0.6,
thank you.
Click to expand...
Click to collapse
trust me, i've been where you are and I know what you mean. what you could do is download the x8toolbox.final (link given below)
http://forum.xda-developers.com/showthread.php?t=1117100
it's really useful for starters. It's very easy to follow commands in it as well. you can root, install recovery, add dual touch and more with easy to follow instructions. x8toolbox is the best!!! all the best and hope it works out for you.
HIT THANKS IF I HELPED!!
http://forum.xda-developers.com/showthread.php?t=1117100

vasek2 said:
Hey,
Just commenting:
I tried to flash it according to the thread you posted. But It does not works with flashtool 0.9.9.0. Even I installed appropriete drivers, but without sucess.
I did not find older version of flash tool and did not do complete factory reinstall.
So maybe it is time to find it and do reinstall...
Click to expand...
Click to collapse
I would recommend to try the older version of Flashtool (0.8.6)- you can find at the "Previous release" tab at the download site (http://androxyde.github.com). Don't forget to install the drivers from the \Flashtool\drivers folder.

frozen
666shanx said:
trust me, i've been where you are and I know what you mean. what you could do is download the x8toolbox.final (link given below)
http://forum.xda-developers.com/showthread.php?t=1117100
it's really useful for starters. It's very easy to follow commands in it as well. you can root, install recovery, add dual touch and more with easy to follow instructions. x8toolbox is the best!!! all the best and hope it works out for you.
HIT THANKS IF I HELPED!!
http://forum.xda-developers.com/showthread.php?t=1117100
Click to expand...
Click to collapse
Finally | could install recovery throug X8Toolbox beta 4. I loaded CWM recovery, I wiped/reseted and flashed ROM MiniCM9-3.0.5 mimmi.Installation ok.
But, when I rebooted I only can see logo Sony Ericsson and the phone does nothing. I can only remove battery but again happens the same. I cannot entry recovery either. Maybe I push wrong buttons...
Please help, in other case I am witout hot dinner from my wife!
Thank you!

vasek2 said:
Finally | could install recovery throug X8Toolbox beta 4. I loaded CWM recovery, I wiped/reseted and flashed ROM MiniCM9-3.0.5 mimmi.Installation ok.
But, when I rebooted I only can see logo Sony Ericsson and the phone does nothing. I can only remove battery but again happens the same. I cannot entry recovery either. Maybe I push wrong buttons...
Please help, in other case I am witout hot dinner from my wife!
Thank you!
Click to expand...
Click to collapse
i guess you are new to this phone. you have a soft brick. install Sony PC companion and go to 'support' and repair your phone manually by following the instructions there. nothing to worry.
next,you cannot install minicm9 without unlocking bootloader and without unlocking boot loader, you can't flash custom kernel required for minicm. unlocking bootloader is a bit risky. remove your battery and look for the digits in the form of 11w29. if your phone has anything equal to or above 11w29 (like 11w30 or 11w44), you CANNOT unlock bootloader. you have to flash roms compatible with your custom kernel. so better stick with the stock kernel if you don't want to risk it. i suggest you could try kuyadroid or gingerxperia or froyobread or honeyfroyo
link of some custom roms here:
http://forum.xda-developers.com/showthread.php?t=1879708
and
http://forum.xda-developers.com/showthread.php?t=1425240
hope i have helped you.
HIT THANKS IF I HELPED!!

ROM flash
[Thank you 666shanx! Yes, it helped. Yes, I am new. It is my wife's phone which is fed up with the system (slow, small RAM menory), but she loves this hardware (red, small, hw keyboard). So I wanted to install other version of system to improve it.
I have 11w6. it means I can unlock bootloader. But, if could help me to flash the stock roms to improve the system, maybe I would do it like that.
Am I right?
Thank you!

Yes you could unlock bootloader. But you don't necessarily need to. Try flashing 'kuyadroid'. It installs on stock and DOESN'T NEED UNLOCK!
There are a lot of threads which teach you how to unlock. Search a bit for them. You need flashtool for it, which I guess you already have. Here's one
http://forum.xda-developers.com/showthread.php?t=1821750
But before all that just try kuyadroid. I bet you'll love it
HIT THANKS IF I HELPED!!!
Sent from my W8-miniCM7 using xda app-developers app

kuyadroid
666shanx said:
Yes you could unlock bootloader. But you don't necessarily need to. Try flashing 'kuyadroid'. It installs on stock and DOESN'T NEED UNLOCK!
There are a lot of threads which teach you how to unlock. Search a bit for them. You need flashtool for it, which I guess you already have. Here's one
http://forum.xda-developers.com/showthread.php?t=1821750
But before all that just try kuyadroid. I bet you'll love it
HIT THANKS IF I HELPED!!!
Sent from my W8-miniCM7 using xda app-developers app
Click to expand...
Click to collapse
Ok!
But, what I shall do exactly? To install some recovery and install ROM kuyadriod for SE x10 mini pro ? That's it?
I tried to find corresponding threads but I am a little bit confused about howto.
Thank you!

Yes thats it! Download kuyadroid ROM. Copy to sd card. Install using recovery. You're done!
Sent from my W8-MiniCM7 using xda app-developers app

Cannot find ROM for x10
Well, I tried to find this ROM but all ROMs are for SE X8. Can I use it? Or, do you know where I find it? thnks

all x8 roms work on x10, w8, x10 mini etc. just try it

666shanx said:
all x8 roms work on x10, w8, x10 mini etc. just try it
Click to expand...
Click to collapse
?
what do you mean?
there is no miniCM roms for x10 (x10i); only for x10mini (e10/robyn), x10minipro (u20/mimmi) and x8/w8 (e15/shakira)
and each rom version is device specific and wont work on other devices.

I've already explained to him that minicm roms do not work. I've given him a link of roms which work on all the phones I mentioned...
Sent from my E15i using xda app-developers app

Better Mobile App

welcome