so... i search for wifi conections and i find the desired network, i then enter the correct wep password and press conect - it trys to connect for about 5 seconds and the says "disconected"
i have tried using the static ip address method- doesnt work
i have tried hard reset - doesent work
i have updated to 2.1 (about 3 times)- doesnt work
so any ideas?
i will also add that sony erricson support claim that this is not possible
Have you tried another network? Or reboot your router?
Sent from my U20i using XDA App
works well on one other network (and used to on this network!) - and yes rebooted but still not worked!
If it works on another network, i dont think its something wrong with your phone.
Try a few other hotspots
If you are using WPA then switch to WPA2 on your router!
I had a simular problem after going to 2.1 both on my mini pro and the ex's lg gt540, not sure what caused it, but reseting the router to factory and re entering all my settings fixed it for some reason
Use wep
Sent from my U20i using XDA App
I'm having a similar problem with my wife's x10mini. She has it for the past 6 months and has always been able to connect to our home router. Since 2 days ago she has been unable to see the router in her wifi settings and so unable to connect to it. The strange thing is that she can still see all of our neighbors wifi routers, just not ours, that is just 1m away.... I tried manually adding it but it says that the router is out of range.
I have gone through all router settings I can access and the phone still cannot see the router. I've even left the router wide open, without any protection whatsoever and the phone still couldn't see the router, despite seeing all other routers around.
Please give me some ideas to try. I've also formatted the phone and re-installed everything to no avail. I'm getting a bit lost now.
Maybe this can help someone else, my problem was solved by changing the router channel from Auto to Channel 10.
Maybe the router started using a channel that the phone couldn't see/use.
Sent from my GT-I9000 using Tapatalk
Maybe an complete reinstall of the base system would help also try simply turning on and off your wireless and see if it works
I also experience almost all of these bugs but turnin on and off my wireless fixed my problems
Maybe an complete reinstall of the base system would help also try simply turning on and off your wifi and see if it works
I also experience almost all of these bugs but turnin on and off my wifi fixed my problems
Related
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Is you SSID hidden?
I have found that on some routers, Android phones in general won't connect if the SSID is hidden.
clarkee013 said:
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Click to expand...
Click to collapse
The WRT54GS should be a perfect router to use.
Make sure you are running latest dd-wrt firmware on it, setup wifi security as : WPA2 Personal Mixed, TKIP+AES
I have these settings and phone connects easily.
Its a good router, do as above poster advised and definitely get latest firmware on. Try going on just G mode if there's no B-only old wifi gadgets in your house.
Sent from my U20i using XDA App
I noticed my wife's X10 mini won't connect to Channels 12 and 13. If your router is on one of those channels, try moving it to 11.
I have difficulties connecting to my wifi router at home, SMC Barricade N2, WPA2 authentication, it works only after resetting the router.
Now after turning off TKIP cypher suite (only AES), it works perfectly
update: and also helped to enable static IP... but I am using wifi only @home
Had the same problem. Changed to Channels 11 and detected imediatly my wifi network.
Hi, I have a different problem with the wifi.
At work and some other connections I've seen to have an open wifi, which i can freely connect.
However, I am still unable to browse the internet as it requires some browser authentication.
I've seen other fones (Nokia and Iphone) have their browsers popup a webpage to input the credentials.
but my mini pro doesn't display this page.
i've already tried going directly to the login url manually but still doesn't display the login page.
someone told me that this might be a limitation of android but haven't seen any reports about it...
i also saw and tried 2 apps (Open Wifi Login and Browser Wifi Login) that should have solved this but did not.
Has anyone else had this experience?
Help please....
shameless self-bump
other fones seem to have the same issue but no solution...
http://forum.xda-developers.com/showthread.php?t=622326
help please
Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment
I've searched the forums for a similar issue with no luck, if anyone knows of a thread with a matching problem please provide a link.
My problem is that whenever I connect to my home network via wifi, I'm able to connect/disconnect a maximum of 3 times before wifi stops working completely. On the forth try, the phone will detect the network, try to connect and instantly disconnect. The only way I've been able to get wifi working correctly again is by rebooting the router, which also restarts the '3 connection' cycle.
I'm using a Netgear DG834G v2 and currently running Wolfbreak's latest version of CM6.1.3 but I've had the same issue with every other rom, including the official SE firmware, which leads me to believe that it is a router issue and not the phone itself.
Any help/suggestions would be greatly appreciated.
In your phone, go to WiFi settings and press options button, then select "advanced", in wifi suspension politics (or something like that) select NEVER, then download and install Blade Wifi Fix from the market (i don't know what exactly does but it will prevent WiFi disconnections and it really works), and you can try using (optional) this app to connect to WiFi, if the problem still persists i would rather think it's a router issue or something ._.
CescVicious, thanks for your help. I tried both of those apps but my wifi continues to disconnect. I'm leaning towards it being a router issue more than the phone and have posted the problem on the Netgear forums.
Thanks again.
Jason
Hey guys,
I have a problem with my wifi...
Here is the before: Wifi works about 70% of the time, occasionally the connection would be dropped (as in "no network access", it still said it was connected).
Here is what then happened (in that order): Wanted to find a less crowded channel and installed Wifi Analyzer. Quickly decided that Channel 1 would be cool, browsed to the router configuration on the Desktop machine (LAN connection), changed the channel. Back to home on Android (don't remember whether via the home or back button). Into settings to see whether I would have to rescan or whether it would pick up the change of channel itself. It couldn't connect... It scans and attempts to connect, but doesn't
What I tried:
I restarted the Galaxy. Still couldn't connect.
Deleted the connection and re-entered the passphrase. Still couldn't connect.
Uninstalled Wifi Analyzer. Still couldn't connect.
Restarted device again. Still couldn't connect.
(At some point during all this, probably quite early, the Wifi symbol also stopped showing up in the status bar. Doesn't appear no matter whether Wifi is on or off)
Switched back to the channel I came from. To no avail
Switched of encryption on the Wifi. Still to no avail
Any ideas as to what might have happened and, more importantly, how to fix it? As I said the connection itself has never been the most reliable, but this is a different league
Thank you everyone!
Sandro
If you haven't tried it yet, reset your router. That fixes the majority of Wi-Fi issues out there. If that doesn't work, it may be your router itself. Certain routers have more issues with mobile phones than others.
You may want to go to a friends house and try connecting to his router and see if you can troubleshoot and isolate the issue. Either way, best of luck...
Sent from my GT-I9000 using xda premium
Damn you sitecom router!!!
Alright, one thing I hadn't tried until now was to restart the router. That fixed everything including (for whatever reason) the lack of the Wifi symbol!!
So if that is possible feel free to delete this thread! I didn't find the option anywhere...
Sorry for the unjustified disturbance
Sandro
Hi,
I got a new Sony Tablet S a few weeks back and I have this really weird problem.
As soon as I on Wifi and connect to my college network, it connects fine and webpages open as expected.
But after a minute or so, all data transfer stops even though I am connected to the network. Initially I thought
it was a hardware issue with my tablet but when I went to my nearest McDonalds and connected to their connection, everything
worked fine and there was no interruption in the data transfer.
I tried a couple of other hotspots around town and they seemed to work fine.
So, now obviously its a problem with my college network. The funny thing is that my laptop, my cellphone and about a thousand other devices
connected to the same network work just fine and do not stop exchanging data all of a sudden.
I have tried various apps available on the Play store but none helped.
My (geeky) friend told me that the issue may be some sort of interference between the routers (Cisco Aironet series, I think), as every floor in my hostel has 4 routers, but he could not give a solution. I have also referred the problem to my system administrator but he too could not come up with a solution.
If anyone has a solution to this, please help!
Thanks in advance
Really strange.
I have a rule that occasionally works, strange probelms can be sorted out by a restart, if not, a reset mostly helps.
Can I suggest resetting your tab if not done yet!
Sent from my Desire HD using XDA
Did both. Doesn't help.
you need to re-flash the wifi modules, which comes with the kernel usually. But I dont think that possible at the moment.
Can you elaborate?
I have the same problem with my tablet, and when I called Sony for technical support, they said that the tablet is not compatible with the router I have. Which in my honest opinion dont think is the problem.
But as a way around, what I do is turn off the wifi for few seconds and then turn it back on.
This way the problem gets resolved.
I hope it helps you.
I have exactly the same problem, unfortunately the problem is with the wifi in my home, my sony tablet connect and disconnects, or it stop transmitting after a while, but other devices (my htc phone, my tablet, ipad, iphone) doesn't have this problem.
and as you said, when I go to other places the tablet works fine.
Someone said me that the tablet is not compatible with the motorola router of my ISP
I've been searching but there is no solution, by now I turn off and turn on the wifi every time I lost internet
Thanks people, but this is hardly a solution. It means I need to turn on and turn off the wifi every 60 seconds to browse the internet. Bye bye downloads, buffering videos and installing apps through the play store
Is the Sony Tablet S the only tablet in the world that is incompatible with routers? Then Sony should make sure that its clearly listed on their website that routers from major companies are not compatible with our Tablet
I solved the problem .. at last for me,
1 - turn off wifi.
2- in accounts - turn off "auto connect"
3- turn on wifi ( test if work )
4- reconect the accounts
too simple .. but works , try it..
I am sorry but its not working (that is if by auto connect, you meant auto sync)
Are you sure you are telling the solution to the problem I mentioned or something else?
Hi, I was suffering exactly the same problem and it boiled down that was a compatibility issue with the router. Unfortunately I could not find any other solution but replace the router itself!
Sent from my Sony Tablet S using XDA
Looks like I have to do the same. except I cant make my institute change their routers
What kind of encryption are you using on your router? Try disabling the encryption and see if the problem persists.
Also, what channel are you broadcasting on? It could be a highly populated channel, try changing that if you can.
I don't know what options are available through your routers configuration page.
I will enqure with my system admin and get back.
Meanwhile, I got a workaround to this problem. There is a freeware called MyPublicWifi which creates a virtual hotspot on my computer. This hotspot works fine and I can share my router's internet through this, even though it means I need to keep my PC on while browsing on my tablet.
I have experienced exactly the same problem since I bought the tablet. The router I have at home is a Buffalo WZR-HP-G300NH2. After a very long time trial-and-error, I have found a solution to it.
(1) Router setting: Force to set the 300Mbps mode of Buffalo router to 20MHz, not auto nor 40MHz. Some routers may display 150Mbps mode.
(2) Tablet setting: Settings->Wifi->advanced->Wi-fi disconnect policy, set to "Never"
You may try it and I think this will resolve the wifi disconnection problem. As for the reason, I think it is related to 11n because I have not found any problem with 11a/b/g router yet.
Hope this helps!!