Could someone point me in the direction of the previous version of JuiceDefender, as the recently updated version does not seem to be able to re-enable the data connection. I'm just after the free version, I'm guessing my purchased licence of UltimateJuice will still work with the previous version. Thanks.
Me too. I posted the issue on the app website for review. They requested I try the beta and it has the same issue.
Add me to the list as well. It will turn it off,but not back on.
I've requested the previous version from the author, I will post it here when (if) I get it.
Sent from my Dell Streak using XDA App
2 versions of the beta and the problem persists. I also requested the previous version.
I googled and found a link to a older version that works 1.8.2 (since the dev is of limited help)
http://download2us.softpedia.com/dl...stem Utilities/Enhancements/JuiceDefender.apk
(this is freeware so be gentle, mods)
rename the zip to apk and sideload
Thanks, but the apk doesn't work, parse error.
Sent from my Dell Streak
try dl'ing it again (perhaps via PC) it worked for myself and others...
http://forum.pocketables.net/showthread.php?t=8553
Bigger attachments on this forum...
Hello, just in case someone is interested, you can find "green power". Basically, it does the same than Juice Defender (a few less options, but easier to configure), and works well on the Streak.
Thank you very much. I guess the previous link didnt work directly from the streak. Got it working again now anyway, thanks a lot for your help.
Radimus said:
Bigger attachments on this forum...
Click to expand...
Click to collapse
Sent from my Dell Streak
http://feedback.latedroid.com/forum...racking_code=afd6e156ed143879f005d08943ef2992
Mark @ Latedroid
Most probably the Streak ROM likes to do things differently.
A tentative workaround is in v3.2.7; however keep in mind that I need logs for every new build on the market so I can see what works and what doesn't. The general rule is: try the new version, reproduce the issue, send the log.
So, in this specific case:
- update
- make sure data is working
- open JD, switch to the "about" tab
- turn off the screen, wait 30 seconds
- turn on the screen - data is NOT reenabled, bingo! (well ok, that sucks, but the issue is successfully reproduced)
- tap on "send log"
- MENTION THE PROBLEM IN THE EMAIL
Without logs I have NO chance at finding a workaround - and that last point in the list is of the utmost importance.
Click to expand...
Click to collapse
http://www.androidzoom.com/android_applications/tools/juicedefender-beta_kvtn.html
Can you please help? and post in the latedroid forum at the link on the top of this post
Related
Hi Folks,
I have decided to post this fix as a separated thread because the gigglebread thread is growing incredibly fast and the reference to it gets lost in one or two days after being published.
When GB was at v5, I wrote this post on its thread, to offer to the community a fix that I've created to my device, because I realized that my pain could be the pain of others.
Well, that fix does not works on v8, it puts the system in a infinite boot loop. Therefore I rolled up my sleeves again to update it. And here it comes the updated version. Enjoy while it's hot.
Best Regards,
Ed.
could you please tell us what this fixes and is installation via custom zip option in xecovery?
Thanks in advance.
Hi, I'm sorry for this. The explanation was on the post linked in the previous message... Here's the Quote of that post:
edsena said:
Hi Folks,
I've been following this particular thread since its first day (coincidentally the same day that I started using an Android phone).
The main motivation for using this rom was that to be able to replicate my corporate e-mail and calendar. In order to do that, I would have to be, at least, using Android 2.2, because the company that I work for restricts access to earlier versions because the changes on the lock screen password options that took place on v2.2.
Despite of a few minor remaining bugs, this ROM works pretty well on my device. But, there is an issue that was really pissing me off: The inability of sending DTMF tones using the digits 0*#, because of the layout of the screen. Since I have to join several conference calls per week, that is a huge show-stopper for me. Well, I'm pretty sure that the creator of this ROM is quite busy working on some serious issues (like bluetooth) and do not has the time to take a look into these cosmetic issues, that's why I decided to roll up my sleeves and work on this.
I finally went thru this, and I decided to share this fix on the forum, since I read a lot of people talking about this issue as well. Attached to this post is an update zip file, which will tweak the position of the component of those screens, in order to allow the full visualization of both dialpads (in-call & initial).
To install the fix, just copy it to your sdcard and install it via xRecovery. Please take into account that this comes with no warranty at all, is provided *AS IS*, and I don't want to be responsible should anyone damage a device, loose data, etc, trying to install this package. I only tested it on my phone (where it worked like a charm) therefore I can't guarantee that it will work on other setups as well.
If you like this fix, please click on "Thanks" and feel free to send some bucks to finance some Duvels, Karmeliets or Guiness
EDIT: I've just added a tweak to the "Rotary Selector" to keep it from being in front of the "Calling Card" when an incoming call is received. Therefore now there's 3 zip attached to this post: One that has the 2 fixes and another one for each fix. You can figure out which is which by their names, which are pretty straight forward.
Best Regards,
Ed.
Click to expand...
Click to collapse
@edsena--thanks for elaborating;your original input did indeed get buried under the avalanche of responses to naa!
Awesome fix mate. Great job. But I see *#0 missing when the on call number pad is opened. Any way to fix that?
Sent from my E10i using XDA App
Have installed this and it works smooth .
work perfect in x10 mini pro
thank's.
works awesome! thx for the fix have you sent this to owain? he may post it in the first post
Perfect! Very Good fix!
Sent from my E10i using XDA App
Orkeren said:
works awesome! thx for the fix have you sent this to owain? he may post it in the first post
Click to expand...
Click to collapse
Or include it in his next version?
ruifung said:
Or include it in his next version?
Click to expand...
Click to collapse
That would be cool. Thanks edsena for these fixes.
Cheers,
evilbarcode.
ruifung said:
Or include it in his next version?
Click to expand...
Click to collapse
or that But I suppose that it would need some rewriting, as the old fix (released for v5) didn't work with v8... And it's just a cosmetic fix As far as I know Owains highest prioritys with this rom are FM and some bugfixes on apps not working...
Works Perfectly
Works like a charm!
Thx for this fix!
wow thx a lot dude..works perfect in my mini pro
sachith024 said:
Awesome fix mate. Great job. But I see *#0 missing when the on call number pad is opened. Any way to fix that?
Sent from my E10i using XDA App
Click to expand...
Click to collapse
This fix is supposed to solve that. Isn't it working for you ? Is anyone else experiencing the same issue ?
dude update it for V9 pls... not working in V9.. getting stuck at boot animation in v9..
raghurags said:
dude update it for V9 pls... not working in V9.. getting stuck at boot animation in v9..
Click to expand...
Click to collapse
Same with me. Request seconded
v9 have app .odex... ?? no .apk??
:S
plz. dude, we need it for v9 plz. thanks alot
now we need it for v10 man
If you want the kindle, here's how using linux, works with latest WebOS.
1. Download & install the Palm SDK for linux
2. Just download the app file here.
http://bayfiles.com/file/RB7/oE4hSN/com.palm.app.kindle_0.11.499820_all.ipk
Go to the folder you downloaded and type this command while connected with usb cable to your touchpad, or just install the app any other way you know how.
palm-install com.palm.app.kindle_0.11.499820_all.ipk
Thank you, works perfectly. I put the ipk in my dropbox and installed it with preware without bothering with usb. It also syncs with the Amazon.co.uk accounts without a complaint.
Kindle App still available
As per title,I have searched everywhere,googled it.It was once available but i cannot for the life of me find out to where to download it from.
Any ideas?
Thanks
It has been withdrawn in Europe ( I think) but the US beta version can be had. If I remember correctly I downloaded it from webosbuzz and loaded it using webOS quick install through my desktop. You can still use a UK Amazon account to buy books despite the way the app was obtained. I'm not at home just now so I can't confirm that's where I got it but if you can't find it there post again and I'll double check.
I can't find the .ipk on the site you mentioned. If it's allowed (surely it must if it's a free app) would someone be able to post the updated .ipk on here?
This is the link to where I found it. XDA doesn't seem to allow me to upload it directly
http://www.filesonic.com/file/1779584324/Kindle.ipk
If that won't take you straight there then the link was from Webosbuzz within the HP touchpad apps forum. That particular forum is private so you have to creat an account.
Good luck.
Ps the app seems to work ok. I have been able to get books from Amazon uk- no sideloading though.
Found the newest version: http://hotfile.com/dl/128523150/76e47a4/com.palm.app.kindle_0.11.499820_all.ipk.html
The page turning makes all the difference.
cheers, I'll try that later.
Cube1701 said:
Found the newest version: http://hotfile.com/dl/128523150/76e47a4/com.palm.app.kindle_0.11.499820_all.ipk.html
The page turning makes all the difference.
Click to expand...
Click to collapse
I found this version much buggier than the 0.10.494660 version - it tends to give a blank white screen much more regularly than the older version gives a blank grey screen!
thanks dude, precentral keeps taking down the ipk everytime someone posts it
Wraith_17 said:
thanks dude, precentral keeps taking down the ipk everytime someone posts it
Click to expand...
Click to collapse
its called "theft"
mik3di3s3l said:
its called "theft"
Click to expand...
Click to collapse
That is quite some high horse your sitting on fella. It is easy for you to say that when you live in a land where the kindle app has not been withdrawn. Us euro users just want the same services that you have, after all we did pay more for our touchpads than you guys ever did.
It's not theft, it is digital liberation.
ice_coffee said:
That is quite some high horse your sitting on fella. It is easy for you to say that when you live in a land where the kindle app has not been withdrawn. Us euro users just want the same services that you have, after all we did pay more for our touchpads than you guys ever did.
It's not theft, it is digital liberation.
Click to expand...
Click to collapse
well you wanted an answer to why precentral is taking the links down...
Hey Everyone,
I have seen a lot of people asking for an .apk for Myscript Notes Mobile and figured I would try to help out as much as I can. I get the Lenovo Thinkpad Tablet in the mail next week and it comes loaded with this app. However, I'm not sure how to pull the .apk out of the device. If anyone is interested in giving me a walkthrough I would be happy to pull it and get it posted for everyone to download and use.
Hi
Im also interested in this app.
I think you need to be rooted to use these apps but here you go:
You can use EStrong File Manager and backup of a single X.apk to a default folder \\sdcard\backups\apps.
Maybe you can also use titanium backup but i am not sure about this.
Thanks,
I am hoping to get my tablet early next week at the latest. As soon as I get it I will try and get this App posted.
Any updates on this?
Here you go.
Here you go. I just pulled this apk off a demo I got to test to try on my Droid X. It doesn't work on the droid x. It says that it's "not compatible with this device", but it installs fine. Maybe you will have better luck than me. It might require a tegra 2 or for ur device to be a tablet...i don't know.
puzzling... Not working for me either. I think I'll just wait to see if there are anymore developments.
doesn't work on the EeePad TF, compatibility error.
I am surprised that this is OEM only & only Lenovo have picked it up, seems very restrictive. I have contacts Vision Objects & they won't talk about this being made available directly, it has to come from Asus.
doesn't work on Xoom neither
It's working now
Have a look here: http://forum.xda-developers.com/showthread.php?t=1349849
it should work for you too if you replace the lines in the build.prop file with your own brand and tablet model
ICS 4.0.4
Tochiro said:
It's working now
Have a look here: http://forum.xda-developers.com/showthread.php?t=1349849
it should work for you too if you replace the lines in the build.prop file with your own brand and tablet model
Click to expand...
Click to collapse
compatibility issue solved with build.prop but
application crash after loading because i have ICS instead jellybean. Anyone please provide a file can run on ICS
MyScript notes compatibility
Hi, I just downloaded MyScript notes from a user who is using xda. The file which he provided is good. But it says compatibility error in my smartphone. One user said that we can fix the error by making some changes in a file called build.prop( I don't know the exact file name but this just a guess. Actually it ends with .prop ) But I don't know where this file is located. So can you help me with this problem?
---------- Post added at 09:58 PM ---------- Previous post was at 09:54 PM ----------
Hey how to find this build.prop?
Timber - Unlimited Superficial Judgements
Description:
Disables swipe limit, enables undo, passport does not work (server side limitation). Only for V4.0.5
Download:
Can't post outside links yet :/
On the Xposed Repo: proofofconcept.dontsuemeplz.timber
Changelog:
V1.0 Finally released on the xposed repo. Code has not changed since the last release on /r/xposed
Future Features:
1) Make passport mode "work" by just spoofing the GPS.
2) Auto-like swipe all mode
3) Appear to be a verified profile even if you aren't
4) Psychic mode: Know someone swiped right on you BEFORE you swipe either direction on them
Source:
Source code can be found on GitHub. This source is for an older build, I will upload the newest source soon.
Can't post outside links yet :/
License:
GPL V2.
Support:
I plan on updating this to support V4.2.3 depending on the demand.
I don't want donations, I do this for fun.
I don't work on anyone elses schedule, if you want it updated faster than I am willing to work then you are free (encouraged!) to take the source and fix it yourself
Only posting this because you said depending on the demand, but definitely count me as one of the people that would like to see it updated to the 4.2.3. Either way though, great work man!
Sent from my SM-N910P using Tapatalk
Awesome, was hoping a Tinder module would come around.. will definitely use
thank you
Joey121215 said:
Only posting this because you said depending on the demand, but definitely count me as one of the people that would like to see it updated to the 4.2.3. Either way though, great work man!
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
I'm interested in 4.2.3 as well. Would be willing to beta test or even throw some donation dollars your way. In addition to location, I wouldn't mind more notification options (change notification sound, vibration on/off).
Tinder module plz :sly::sly:
Would it be possible to add an auto like feature with random dislikes.
Working √
Rom: CM 12.0
Android: 5.0.2
Xposed: 3.0 Alpha 2
Sent from my SM-N900T
Added a list of potential future features. Some of these I have worked on a bit, others are just theoretically possible. No promises that I will get these finished but I will try whenever I get some free time. Fellow devs, feel free to grab the source and help implement these features!
I get "problem parsing package" when installing.
Would be awesome if you could keep compatibility with latest versions, this app is awesome thanks!
Is there something I need to do after installing it to activate the unlimited swipe? I've downgraded to 4.0.5 and activated the module as well.
Also, definitely would love support for 4.2.3!
Really good job, thanks and of course, I'd love the support for 4.2.3
Sent from my OnePlus One.
How are you guys installing this? When I download off xposed website and try to install I get "problem parsing package". When downloading from xposed app I get "downloaded file is note a valid apk (or incompatible)"
Joe333x said:
How are you guys installing this? When I download off xposed website and try to install I get "problem parsing package". When downloading from xposed app I get "downloaded file is note a valid apk (or incompatible)"
Click to expand...
Click to collapse
Try clearing your dalvik cache. D
Joe333x said:
How are you guys installing this? When I download off xposed website and try to install I get "problem parsing package". When downloading from xposed app I get "downloaded file is note a valid apk (or incompatible)"
Click to expand...
Click to collapse
I had this same issue. For me it was b/c my ROM was old. I am still using JB 4.2.2 When I upgraded to 5.1.1. it worked.
To OP-
Are you sure that the swipes is not limited to the server ? If you hit the paywall, then adjust the time on your phone (trick it to think the time as passed by), you can keep swiping. The thing is, when I did that it "appeared" that even though I was swiping, there was no registering. Just my .2cc
Looks like when someone has mutual friends it doesn't allow me to see them. Not a big deal but is that by design or something?
Sent from my A0001 using Tapatalk
Steve_xposed said:
Timber - Unlimited Superficial JudgementsSupport:
I plan on updating this to support V4.2.3 depending on the demand.
I don't want donations, I do this for fun.
I don't work on anyone elses schedule, if you want it updated faster than I am willing to work then you are free (encouraged!) to take the source and fix it yourself
Click to expand...
Click to collapse
Nice work and demand is high!!!
gunde2014 said:
Try clearing your dalvik cache. D
Click to expand...
Click to collapse
Were you able to verify that it has unlimited swipe? Do I need to have full swipe left in order to use it?
Sent from my VS985 4G using Tapatalk
I got jelly bean too, is there a way to recompile it? I have all eclipse & android sdk set up already
Im not sure how to compile im pretty noon tbh.
Works good for me and I used an auto script to swipe after installing. It swiped probably 1000 times and no matches.
Typically I get 1 match out of 30 swipes. The pay wall I believe is 100.
I've used the app for a long time and that really has not changed. It could be I got no matches after 1000 swipes but I suspect even though the app is clearing the server is locked.
---------- Post added at 08:07 AM ---------- Previous post was at 08:05 AM ----------
I reflashed JB and made a nandroid of 5.1.1. With everything set up. If there are changes I can reflash but I still like JB 4.2.2.
mikeprius said:
Typically I get 1 match out of 30 swipes. The pay wall I believe is 100.
I've used the app for a long time and that really has not changed. It could be I got no matches after 1000 swipes but I suspect even though the app is clearing the server is locked.
---------- Post added at 08:07 AM ---------- Previous post was at 08:05 AM ----------
Click to expand...
Click to collapse
i also think this is happening. does anyone else agree? or can OP confirm its not happening.
Hi guys, I hope someone can help coz I'm at the end of my tether!.
I've got a Hudl v1 which I factory reset because it was getting slow with stock ROM (never changed anything).
I come to the Let's get started and I click Start to get to the WIFI selection bit. I connect to my own router and it quickly says Authenticating (which it does), then it say Cannot connect to the internet, check your WIFI, and I click OK which takes me back to the WIFI connection screen. If I reboot at this point and start again, at the connect to WIFI point it says connected and there's the WIFI icon but no triangle icon to continue.
I've tried it on several networks, both open and secured and set it static IP but no luck.
If I use the Google keyboard method of getting to Settings I can browse Ok using Chrome and access Play Store etc and install apps.
I have tried 3 different ROM's now and all are the same. Used RKTOOL to flash it. Factory reset after installing each of them.
Debug mode and rooted now BTW.
I used ES explorer to browse to system/apps folder and renamed the HUDL SETUP apk to something different then reset again. The only difference now is that I have the 3 nav icons at the bottom.
Is there a way around this to skip the WIFI screen and continue to the next setup screen?
Is there a way of killing this process (if so what's it called?) of removing it?
Much appreciate any help.
Cheers
Paul
Factory reset HUDL - cannot get past the wifi screen
Paull,
I am having exactly the same issue my HUDL. I have not been through as many processes as you to get around the startup screen. My main theory now is to wipe the HUDL software and install alternative Android OS. Not sure if that would work in practice, but seems just the HUDL thats the issue.. Is it possible this is a deliberate bug by HUDL to kick the systems gradually off the market? Seems a waste as my HUDL still works well, so be stupid to bin it just yet.
Can you add any advice on how you did the other actions - how did you get your three buttons and did they operate as expected - presuymably not:? Even when I by pass to the keyboard section I am unable to download or update apps or install the Google Now Launcher.
Seems stupid to me. Really keen to find a post a fix for this stupid stupid issue?
Stuart
pwigg said:
Hi guys, I hope someone can help coz I'm at the end of my tether!.
I've got a Hudl v1 which I factory reset because it was getting slow with stock ROM (never changed anything).
I come to the Let's get started and I click Start to get to the WIFI selection bit. I connect to my own router and it quickly says Authenticating (which it does), then it say Cannot connect to the internet, check your WIFI, and I click OK which takes me back to the WIFI connection screen. If I reboot at this point and start again, at the connect to WIFI point it says connected and there's the WIFI icon but no triangle icon to continue.
I've tried it on several networks, both open and secured and set it static IP but no luck.
If I use the Google keyboard method of getting to Settings I can browse Ok using Chrome and access Play Store etc and install apps.
I have tried 3 different ROM's now and all are the same. Used RKTOOL to flash it. Factory reset after installing each of them.
Debug mode and rooted now BTW.
I used ES explorer to browse to system/apps folder and renamed the HUDL SETUP apk to something different then reset again. The only difference now is that I have the 3 nav icons at the bottom.
Is there a way around this to skip the WIFI screen and continue to the next setup screen?
Is there a way of killing this process (if so what's it called?) of removing it?
Much appreciate any help.
Cheers
Paul
Click to expand...
Click to collapse
---------- Post added at 11:35 AM ---------- Previous post was at 10:57 AM ----------
I called TESCO contact centre and they confirmed that the software is no longer support and this sounds like a deliberate bug to stop the devices. - If you have a HUDL I would urge you not to factory reset as this will kill it altogether. I think from an environmental standpoint its atrocious to do this and for TESCO not to have a section about it on the website. They should also be telling people where they can send the devices for recycling or repurposing or offering a very basic OS so it can still be used even with limited fucnctionality. We need to start thinking about the whole picture and getting the information like this out there in the public domain.
Stuart
load settings
stuartcm83 said:
Paull,
I am having exactly the same issue my HUDL. I have not been through as many processes as you to get around the startup screen. My main theory now is to wipe the HUDL software and install alternative Android OS. Not sure if that would work in practice, but seems just the HUDL thats the issue.. Is it possible this is a deliberate bug by HUDL to kick the systems gradually off the market? Seems a waste as my HUDL still works well, so be stupid to bin it just yet.
Can you add any advice on how you did the other actions - how did you get your three buttons and did they operate as expected - presuymably not:? Even when I by pass to the keyboard section I am unable to download or update apps or install the Google Now Launcher.
Seems stupid to me. Really keen to find a post a fix for this stupid stupid issue?
Stuart
---------- Post added at 11:35 AM ---------- Previous post was at 10:57 AM ----------
I called TESCO contact centre and they confirmed that the software is no longer support and this sounds like a deliberate bug to stop the devices. - If you have a HUDL I would urge you not to factory reset as this will kill it altogether. I think from an environmental standpoint its atrocious to do this and for TESCO not to have a section about it on the website. They should also be telling people where they can send the devices for recycling or repurposing or offering a very basic OS so it can still be used even with limited fucnctionality. We need to start thinking about the whole picture and getting the information like this out there in the public domain.
Stuart
Click to expand...
Click to collapse
i know this is old but just going through this on my granddads old Hudl, he died so no way am I getting rid the first post got me interested but didnt know what they keyboard trick was have found out so am posting here to help other users
1. select anywhere that will let you type in text
2. when the keyboard comes up long press the microphone key
3. click on google keyboard settings
4. scroll down to about google keyboard
5. click on privacy policy (it will load up google chrome)
6. in the address bar type in google app
7. the google app will show click on it in the google search results
8. click open in play store
9 click on open
10. in the search bar type settings / play store
11. root your tablet following other guids
hope this helps fill in the blanks
Tesco HUDL1_Post-factory reset Workround
Hi All,
Over the past couple of years I've contributed to the MoDaCo forum on this topic as a HUDL user - since the MoDaCo forum is now defunct (sadly, recently confirmed to me by PaulO'Brien via email), I thought it might be useful to fill in some of the gaps for you by summarising the extensive history surrounding this problem, starting from the first Tesco server outage in early 2019. Much of this was documented in MoDaCo but is now no longer available.
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
If any of you are interested in viewing this file, please let me know via this post and I will look into alternative means of getting it to you.
Viv
viv001 said:
Hi All,
Over the past couple of years I've contributed to the MoDaCo forum on this topic as a HUDL user - since the MoDaCo forum is now defunct (sadly, recently confirmed to me by PaulO'Brien via email), I thought it might be useful to fill in some of the gaps for you by summarising the extensive history surrounding this problem, starting from the first Tesco server outage in early 2019. Much of this was documented in MoDaCo but is now no longer available.
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
If any of you are interested in viewing this file, please let me know via this post and I will look into alternative means of getting it to you.
Viv
Click to expand...
Click to collapse
Hi would you be able to contact me somewhere regarding this? would be interested in taking look at the pdf file
Hi
I would certainly be interested in looking at the .pdf as I have 2x Hudl 1 both of which have been factory reset before I knew Tesco no longer supported them and had swithched off the server.
Thx
Tesco HUDL1_Post-factory reset Workround
KingUsman said:
Hi would you be able to contact me somewhere regarding this? would be interested in taking look at the pdf file
Click to expand...
Click to collapse
Hi,
Since I'm new to this forum and there do seem to be quite a few restrictions on exchange of data, I'll need some advice on how to give folks access to the pdf file. As you'll appreciate, the amount of info is too large to insert into a post 'longhand', so a separate document was really the only way to go with this.
I suspect there will be quite a bit of interest, and it would be a shame if the site's restrictions prevented me from sharing the info.
I notice there is an icon on the post compilation page entitled 'Insert email link' - what exactly does this do, and could we use it to exchange email addresses offline ? I've no objection to corresponding with interested individuals, but I'd rather not broadcast my address too widely....
Cheers, Viv
Grimbo58 said:
Hi
I would certainly be interested in looking at the .pdf as I have 2x Hudl 1 both of which have been factory reset before I knew Tesco no longer supported them and had swithched off the server.
Thx
Click to expand...
Click to collapse
Hi, Happy to let you have a copy, but please see my reply to KingUsman re how best to do it. Not sure why the forums are so restrictive...
My sympathies on being landed with 2 'dead' HUDLs by Tesco - you certainly won't have been alone in this, given the popularity of this tablet and continued buoyancy of the second hand market before the event....
Cheers,
Viv
viv001 said:
I can also offer you a couple of workround solutions which I’ve tested on a factory-reset HUDL1, and documented as a detailed instruction set within a .pdf file.
Since it isn’t possible to attach anything other than image files to this post. I’ve transferred the file to Google drive. Unfortunately as a new user, it does not appear to be possible for me to include the shareable link within this reply to allow you access…..
Click to expand...
Click to collapse
Hi Viv,
I've sent you a PM, and hope you can share the link to the PDF that way?
Thanks,
Rob.
viv001 said:
Hi,
Since I'm new to this forum and there do seem to be quite a few restrictions on exchange of data, I'll need some advice on how to give folks access to the pdf file. As you'll appreciate, the amount of info is too large to insert into a post 'longhand', so a separate document was really the only way to go with this.
I suspect there will be quite a bit of interest, and it would be a shame if the site's restrictions prevented me from sharing the info.
I notice there is an icon on the post compilation page entitled 'Insert email link' - what exactly does this do, and could we use it to exchange email addresses offline ? I've no objection to corresponding with interested individuals, but I'd rather not broadcast my address too widely....
Cheers, Viv
Click to expand...
Click to collapse
I've sent you a PM, can you see if you can send the link through there? If not maybe you can try enter it here with spaces between and see if that works
Sorry, folks - I've tried to unravel the complexities of exchanging information via this forum, but they do seem to me to be insuperable for a 'novice' user. I'll have to explore other ways of sharing the information....
In the meantime, best of luck finding ways to reactivate your HUDLs,
Cheers,
Viv
viv001 said:
Sorry, folks - I've tried to unravel the complexities of exchanging information via this forum, but they do seem to me to be insuperable for a 'novice' user. I'll have to explore other ways of sharing the information....
In the meantime, best of luck finding ways to reactivate your HUDLs,
Cheers,
Viv
Click to expand...
Click to collapse
If you can upload the PDF to this link
https://www.dropbox.com/request/l3mJsUEvPhWvZtMR2mLM
I'll be able to share it with others for you.
Thanks to both you and Viv for helping out with this. If you manage to get that available on dropbox I would be keen (and very grateful) for a copy.
The restrictions on this forum do seem quite onerous. My original attempt to post a reply was rejected because it quoted your post which contained a link!
Thanks
FIXED!
I just managed to get past the setup wizard and get both my Hudl 1's back into service. The problem is not that the Tesco server is gone, but that it's certificate expired on 26th June. If you can escape the wizard and get to settings to set the Hudl's time to before that date the wizard completes successfully.
I've written up how I escaped the wizard and got into the settings to do this - it's s combination of information from this thread and stuff I've found elsewhere, none of it is really mine . No rooting or USB debuuging required.
Find the write up here: Apparently I haven't posted enough here to be able to post the actual link, so try this ....
https colon slash slash rob dot themayfamily dot me dot uk slash hudl
If someone with enough privileges could post an actual link for others to click that would be excellent.
I hope this is useful. Please let me know if you find better/easier ways to achieve the same end effect. If I get time I'll have a look to see if the setup wizard can more easily be disabled, but for now this has got me where I need to be.
Enjoy,
Rob.
[Edited to add: you can find a clickable link under the Home Page in the contact info of my profile]
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
EDIT: OMG IT WORKS!!!! I guess setting it to 2015 was a bad idea. Should of checked before and set to 22/11/19. Thanks dude!
lemurmad said:
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
Click to expand...
Click to collapse
Sorry, but not sure what website you went to. If you go to my site there are step by step instructions for recovering - but I still don't have enough posts here to link to it directly. If you click on 'TigerRob' to the left of this post and then follow the link to 'view profile' and then click on the 'Contact Info' tab you will find a link under the 'Home Page' - follow that to my write-up.
I've had a couple of other people confirm that they've made it work - let me know how you get on.
I'm working on a custom ROM, based on the latest stock ROM (JDQ39.20140424.153851) that will have the following features:
- boot 'chime' disabled
- setup wizard & Tesco updates disabled
- Tesco apps and branding removed
- Remaining stock apps updated to latest available for JellyBean/4.2.2
I'm probably a week away from having something that can be tested - if you're interested in having early sight and helping test then please let me know by replying here or PM'ing me.
Rob.
Fixed as well!
Rob, thanks for what is probably the best described fix I've ever seen for a tech problem. It worked perfectly, just as you described at every step, including the lack of download of the settings app so I went back and reset the hudl again but was quicker through the process second time. Excellent job! Rob
lemurmad said:
TigerRob, I went to the website and tried. It still says failed to connect. I did the same thing you did by resetting thinking it was a good idea but totally forgotten about this being a thing with hudls. Im gonna try again and hope for the best.
EDIT: OMG IT WORKS!!!! I guess setting it to 2015 was a bad idea. Should of checked before and set to 22/11/19. Thanks dude!
Click to expand...
Click to collapse
I'll add an instruction not to go too far in the past . The Hudl talks to other sites during setup, and if they have certificates then those certificates will have 'not before' dates, and if you set the time before these dates then those communications will fail ...
TMF Custom ROM v0.1 (for HUdl 1)
I have a working custom ROM that is currently running on 3 of my Hudl's. If any with a bit of experience of flashing the Hudl want to give it a shot then drop me a PM and I'll share a link - but I'd like to get some confidence of it working on other devices before I open up to general downloads.
.
Rob.
This ROM is not Rooted. It just works around the issue of not being able to complete the setup wizard but disabling it and removes most of the Tesco branding. More information once I have confidence that it's good for wider distribution