[Q] x10 is dead after up rom ... fail - XPERIA X10 Q&A, Help & Troubleshooting

after up rom to 2.1 ... fail in progress, sony x10 screen is dark and can't start again. now can i do next?
sorry for my bad english ...

Can u explaib more. If thats what i think it is i did use se pc companion to repair it and it worked again.
Sent from my X10i using XDA App

reflash it with X10flasher?

Try to Back sw1.6,,,

take the battery out for 10 minutes.. then when you put it back in.. don't switch it on..
fire up SEUS and plug the phone in in flash mode (holding the back button).
If SEUS doesn't detect the phone then your pretty much screwed I'm afraid.
If it does then carry out a "Repair".
Good luck.

Download Flashtool 0.2.6 from android development thread get the specific firmware for your phone and will be ok in less than 10 mins. Good luck
Also check this post:
http://forum.xda-developers.com/showthread.php?t=928343

Related

I tried to do the flash from 1.6 to 2.1 on x10a

now all my phone does is rebooting it self every 10 seconds... pc companion does not recognise the phone.
should i trash the phone? or is there another way to reflash/repair the phone?
oh and F sonyericsson, i hate them now more than ever.
wfaddah said:
now all my phone does is rebooting it self every 10 seconds... pc companion does not recognise the phone.
should i trash the phone? or is there another way to reflash/repair the phone?
oh and F sonyericsson, i hate them now more than ever.
Click to expand...
Click to collapse
Use SEUS and repair the phone through there.
Both are refusing to download an update that would do a fix... AAAAAh
wfaddah said:
now all my phone does is rebooting it self every 10 seconds... pc companion does not recognise the phone.
should i trash the phone? or is there another way to reflash/repair the phone?
oh and F sonyericsson, i hate them now more than ever.
Click to expand...
Click to collapse
Why? SE didnt tell you to flash your phone...you did it at your own risk. Anyways hope u got it worked out man.
Sent from my X10i using XDA App
leave the battery out for 5min then try again by opening SEUS and geting to teh screen where it says connect phone
then hold the back button and connect phone
tell us what it does next
yeah that 5 minute wait thingy does not work at all, i followed this link http://forum.xda-developers.com/showthread.php?t=683793 and go to the down load right under Flash Tool (can unbrick X10i with provided files), and surprisingly it worked now i have R1FA014 on an x10a, so i guess i am half way though to 2.1. THANK GOD my phone at least is re usable.
i am going to try to go through it again and c if i can get it to run 2.1. now that i was able to unbrick i can unbrick again i guess.
here are the symptoms i was going through, the phone will restart just before getting to the home page... if i put it in a flash mode itgives me an orange ligh a symbol in the middle screen that it was charging and nothing happens. after battling the DEVid thingy and trying it 5 - 6 times one of them clicked in and recognized my phone.
might be good to try to install SEUS and the 2.1 flash on another PC where you have never had SEUS on

Help with brick

My english is bad but i will try to explain:
My xperia x10 mini is bricked, and i try tu use SEUS but this say does't exist firmware or your have the last firmware, and i try in sony companion reparation and is the same thing, HELP, i try to use flashx10 but i dont know how to use it and what i need to download.
Actually im installing a x10a 2.1, but this freeze when it install the Kernel...
X10a to mini? Whoa? What were u thinking?
Try bin4ry's flashtool
Sent from my U20i using XDA App
Thats easy, hold center button ( Menu ), then power button and fast click back button and iclude usb while updating in SEUS or PCC.
Im tryng now with flashtool, its normal the time of the procces? (im here 4 hours and dont finish) and I try to power off totally the phone (with power and center button and move the switch of the battery) and try seus and nothing.
Im still waiting finish the flashtool, yesterday i put the flashtool in the night to awake with the phone good, but the pc got a error and got a black screen and a white line so im getting nervous for the fail again...

x10 mini e10a brick HELP

Hello, i need help because my X10 mini and not light or the sony logo, wanting to increase the baseband but I put a want of x8, now I've done everything but does not work, sony companion and seus says I have the latest software, and install a version 1.6 flashx10 e10i (when mine was E10A) accept the installation but still does not turn, I'm really desperate, I can only enter the flash mode, but I can not do anything else, and angry While Sony does not want to update the phone (which is why I wanted to minicm) and those who create custom rom both have to be well received thanks but when help ignore a problem, please help nesecito now.
Use Flash tools.
first download Flash tools
http://forum.xda-developers.com/showthread.php?t=920746
after download firmware
http://forum.xda-developers.com/showthread.php?t=825664
Ok im downloading the flashtool and e10a firm, but in the last time i got a UPDATE OF 15 hours, its normal to flash the phone got that time?
I succesful flash the phone, but now, i cant go to the flash mode, and the phone now completely dont turn on, only the red led flash 3 times, WTF? help
I also had the same problem . The red led flash three times because your phones battery is dead. So you plug in your phone with usb cable to the computer and let it remain for two or more hour . During this time the phone would not turn on and you can do nothing with your phone during this time. You will only see the red led . After two hours of charging disconnect and run seus and Follow the onscreen instruction. I followed the above mentioned procedure and I got my mini back .
Sent from my X10mini using XDA Premium App

[Q] X10i can't do flashing and repair from PCC & SEUS...

my x10i v2.3.3 batt was running low at 8%... so i turn it off from my work place... when i reach home and turn my phone on, my phone only vibrate abit and nothing was happen... so i tot my phone battery is flat so i when to charge it... but when i charge the phone nothing happens too.. i try take out the batt and put it back afew times but still not working... so i tot is my software facing problem and i use PCC and SEUS to repair... but it say can't install update try again.. i do it around 3 to 4 times... but still the same.. now my phone when i press on it blink green led once and nothing happen... but when i plug in my charger, the led turn green but in black screen... so can any1 help me fix tis.. thanks...
Hey, 'm facing the same issue
Recently i upgraded my Xperia to "ThGo2 v16.0" from custom rom..
After some time the rom got unstable and restarted the phone, however it wouldn't boot up. Now i have completely black screen, all the time, with few red blinks
(I have tried all the solutions here:
1. SEUS : Says ur phone is already update and show Xperia arc in backgroud. No update available
2. PC companion: Tried all the tricks to start w/o connecting n all still the phone is not detected.
3. Flashtool, tried flashing it with 0.6.8 and 0.2.9.1
4. I have also used other tools like superclick, root / unroot and S1 tool (no of them worked)
Now, nothing is working with few red blinks and gree light..
Please help, my phone is converted into a black paper weight now....
Use pc companion. Or flashtool
Sent from my X10 using xda premium
Nopes
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
surajpardeshi said:
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
Click to expand...
Click to collapse
U from India? Know hindi?
Sent from my X10 using xda premium
Me too BRICKED or Semi Bricked.... =(
First fail PCC
Then PCC Repair fail too
SEUS fail.
Took to different computer that was finally able to flash 2.1.1 update last year.
Clean install of pcc and seus Both still fail
In fact pic with yellow is from that fail & all others (Using Flashtool) except X10a_2.2.1.A.0.6_Rogers.ftf I get regular triangle with ! over top of phone pic after SE I've exhausted ALL my efforts and need guidance. I am super broke right now, so repair shop not good option. Two shops here in town say they will try, but NO PROMISES and still must pay for time
NEED True rescue fix here
Hindi yes
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
surajpardeshi said:
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
Click to expand...
Click to collapse
Right now i am bit busy. I will upload a pic for u as soon as i get free.
Sent from my X10 using xda premium
Using pcc... Even on "no phone connected"
Help us!!!
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
enzo1984316 said:
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
Click to expand...
Click to collapse
Did you try to read the above post at all?
Sent from my X10 using xda premium
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
enzo1984316 said:
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
Click to expand...
Click to collapse
Charge your battery using another x10 or any external charger
Sent from my X10 using xda premium
FIX!
I had the same issue when I was experimenting with ROMs and Recoverys, but not to worry, Sony PC Companion 2.1 does the trick!
Download PC Companion 2.1 from the Sony Mobile website
1. When you download and open it, click start under Support Zone
2. Click start under Phone Software Update
3. When the window saying that a phone could not be found appears, click repair phone
4. A windows like this will appear, click continue to proceed with the repair of the firmware
NOTE: All data that is placed on the phone memory will be wiped but any data saved on the memory card will be spared
5. After clicking continue, a window like so will appear. Tick the box and click next to continue with repair!
6. Sony PC Companion 2.1 will now prepare the computer for the firmware update
7. Now choose your phone model, in this case it should be the Xperia X10 (X10). Select the phone and click Next!
8. Follow the prompts to repair your phone!
GOOD LUCK!!
Always fails for me.
All process end in fail
There must be a file I need to rename or something....
tried everything now...
I have tried everything by now, here i have attached a attachment of error i get while repairing my phone through SEUS..
only option is box flash, but i think its kind of risky...
Fail fail fail..... i'm getting hopeless wif my X10
Hey,
I did some re-search and got to know that somehow my X10 flashes as So-01C in some systems, i.e. xperia arc, even while updating ..........
Anyone here, knows other ways to flash through box other than technician, coz these technicians are real idiot they can crap your phone in 10 seconds, so its better to crap it yourself...
"alternative to box flash, please ???"
Try this
Had the same problem once, when my phone would not start at all, all I had to do was connect it to the PC Companion (2.0), at first it wouldn't repair but after a certain amount of tries it did the trick,
First: Make sure all your drivers are installed, if they were installed there should be no problem.
If they were not, the computer cannot identify your phone, try installing some other x10's drivers (cause your's is bricked I assume) that might do the trick aswell.
Open PC Companion > Support Zone > Phone Software Update (Start) > Follow Instructions > Repair
It might take several tries to get it right
If this doesn't work try the latest flashtool, it should do the trick !!
There must be something you are not doing right, else SEUS/Flashtool should have worked like a charm.
see i get this reply, when updating x10..
I have tried this like thousands of times, installing roms and then removing them and repairing the phone, but this time it has gone over my head........

Pls help with xperia x10i

Hello, I have a sonyericsson xperia X10 suddenly stopped turning, i tried to repair it with the FlashTool, the flash process its ok , but at the end of the process and turn it , vibrates only once and not on the lcd (black), and when i reconnect to the PC, the phone is in flash mode again., pls which files or Fw additional need install first for repair?? thks for your time pd i use the fw x10i generic stock and pc companion not repair it display a error in upload the sw to phone.
Please use search tab all is there.Take your time and read.
thks for your time, itried all methods mentioneh in the posts but nothing work, for this reason i need help thks...
I installed a Rom that went wrong and had to use flashmode with sony's update program, not sure how it's called these days. I if you install that and plug it into the pc holding down the Back button, it recognizes it and will all you what you want to do. Select restore (or something similar). It'll restore it back to 2.3.3. After that you can install xRecovery again with flash tool.
Be aware that this worked for my semi bricked X10i, no guarantee it'll work for you ofcourse.......good luck
Sent from my X10S using xda premium
Thks, i tried this for 2 days, but in the Pc companion display the message " no exist software update for your phone", later, put on the phone and noting, only one vibrate and the lcd is permanently black, i put again to usb/pc and display the message SEMC flash.... , pls exist a solution for this issue??? thks
You only get that message when you plug in the phone too early
Update>repair>select x10i>then press continue etc>THEN connect phone.
And run stuff as administrator if you got w7.
Sent from my X10i using xda premium
I tried to repair with pc companion , but adter the finish os the process display ok , but the phone stuck in flash mode all time...
Yoy can try flashing a different kernel.Ive had all sirts of errors and failures,something always works.
Charge battery
Try other flashtool version
Try x10 flasher
sent by my x10i using xda premium
ok i tried this options thks
I tried with diffrent kernels but not working , exist a guide for repair this issue, my x10i its always in flash mode, flash with flash tool and again stays in flash mode
Use SE update service maybe it works for you..
Sent from my X10 using XDA

Categories

Resources