Hello all - I don't know if there's any answer to this or not but thought I'd throw it out there. I updated Android myself to 2.1 since apparently AT&T doesn't feel the need to. That has been a fine experience and I've experience nothing negative aside from the wireless network speed. My phone now always has the H (for HSDPA from what I understand) instead of of 3G, but downloads, web browsing, and YouTube are all way slower than they were before. It takes 10 - 15 seconds to download a 750k app usually. I have ran the speed test app from speedtest.net and its results confirm this by showing 44 kbps downstream & 750 kbps upstream speeds.
Is there anything I can do to fix this? I know that HSDPA is supposed to be faster than 3G but this is unbearable - I am almost tempted to use EDGE exclusively because that is all I pick up at home (EDGE service that is) and I get better performance when using the browser than I do with HSDPA (although that is probably more mental than anything since when on HSDPA I am sitting there staring at the phone thinking "What is taking so long!" and when on EDGE I choose something and then don't worry about it for a few because I know it will take some time.
Thanks for any advice!
Budbay1 said:
Hello all - I don't know if there's any answer to this or not but thought I'd throw it out there. I updated Android myself to 2.1 since apparently AT&T doesn't feel the need to. That has been a fine experience and I've experience nothing negative aside from the wireless network speed. My phone now always has the H (for HSDPA from what I understand) instead of of 3G, but downloads, web browsing, and YouTube are all way slower than they were before. It takes 10 - 15 seconds to download a 750k app usually. I have ran the speed test app from speedtest.net and its results confirm this by showing 44 kbps downstream & 750 kbps upstream speeds.
Is there anything I can do to fix this? I know that HSDPA is supposed to be faster than 3G but this is unbearable - I am almost tempted to use EDGE exclusively because that is all I pick up at home (EDGE service that is) and I get better performance when using the browser than I do with HSDPA (although that is probably more mental than anything since when on HSDPA I am sitting there staring at the phone thinking "What is taking so long!" and when on EDGE I choose something and then don't worry about it for a few because I know it will take some time.
Thanks for any advice!
Click to expand...
Click to collapse
This is probably a network coverage issue and nothing you can do about it from a phone standpoint.
Ha! I love the first response had a joker pic because I was thinking of the joker when I wrote "why so sloooow".
Anyways when you say coverage what do you mean precisely? do you simply mean at&t hasnt done enough in my area for hsdpa to be effective? I do always have a full 4 bars of strength on it pretty much.
Thanks!
Sent from my X10a using XDA App
Budbay1 said:
Ha! I love the first response had a joker pic because I was thinking of the joker when I wrote "why so sloooow".
Anyways when you say coverage what do you mean precisely? do you simply mean at&t hasnt done enough in my area for hsdpa to be effective? I do always have a full 4 bars of strength on it pretty much.
Thanks!
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Yes, I mean AT&T. Having four bars means that you have a good signal. It does not indicate however how much bandwidth AT&T has allocated to that particular area/tower.
Think of it like a wireless router at home or office. On your laptop or computer, you see that you have a strong WiFi signal but, that does not mean that you have a fast connection as that depends on your DSL/cable connection.
Get my point?
Got it, that's what I feared. So in essence by improving my phone with 2.1 I screwed my phone (currently) with hsdpa
Sent from my X10a using XDA App
Budbay1 said:
Got it, that's what I feared. So in essence by improving my phone with 2.1 I screwed my phone (currently) with hsdpa
Sent from my X10a using XDA App
Click to expand...
Click to collapse
No, it did not screw your phone. Your phone is innocent here. It is probably the network. AT&T may have a problem in that area. Did you try the speed somewhere else?
Nope, haven't tried it anywhere else. I didn't mean screw my phone, what I, meant was if at&t is not so good with hsdpa in my area I am stuck with those speeds until that is resolved because I can't force 3g (my speed when I had iphone 3g was usually around 1 mbps)
Sent from my X10a using XDA App
I am on att also with the 2.1, luckily im in an area where i get around 2mb/2mb sometimes faster, sometimes slower. Did you try the setting in wirelessnetworks/mobile networks/network mode/ tick wcdma only if not on H. could help not sure, just a thought.
Budbay1 said:
Nope, haven't tried it anywhere else. I didn't mean screw my phone, what I, meant was if at&t is not so good with hsdpa in my area I am stuck with those speeds until that is resolved because I can't force 3g (my speed when I had iphone 3g was usually around 1 mbps)
Sent from my X10a using XDA App
Click to expand...
Click to collapse
Your phone automatically switches between H/3G/E where available. I also have AT&T and have debranded my phone and did not notice any lag.
your problem is AT&T.
H is higher than 3G. if you got problems with it it`s because the signal is strong enough to use H but it preforms worse than 3G (cunfusing ah?!)
Well I was outside of my town the other day, in the country and noticed I was in hsdpa somehow so I ran a test and out there I was getting on average about 3.7 mbps. I guess where I am most of the time just isn't an optimal spot. Thanks all for the responses!
Sent from my X10a using XDA App
Related
I am just trying to figure out if it is my phones fault or just the general sprint's coverage that is lacking in speed in my area. Using a speedtest, I get speeds as low as 100kbps to as high as 800kbps, never past 1mb. I even tried performing the test not only at my house, but at other places where I work and I never had it perform faster than 1mbps.
Should I go to a sprint store and ask them about this situation?
my phone is rooted and has a custom rom so maybe it's not a good idea, unless I return it to stock?
Find someone else with a sprint phone and run a test side by side. That'll tell you if its your phone or not.
If I went to the sprint store, and they accidentally saw that I am rooted or flashed a custom rom would they do anything?
I would rather just go to a store and talk to the rep directly, maybe compare speeds with whoever works there.
matase said:
I am just trying to figure out if it is my phones fault or just the general sprint's coverage that is lacking in speed in my area. Using a speedtest, I get speeds as low as 100kbps to as high as 800kbps, never past 1mb. I even tried performing the test not only at my house, but at other places where I work and I never had it perform faster than 1mbps.
Should I go to a sprint store and ask them about this situation?
my phone is rooted and has a custom rom so maybe it's not a good idea, unless I return it to stock?
Click to expand...
Click to collapse
Those speeds are normal for Sprint's lackluster 3G network; where I work I get full bars and my 3G speeds rarely exceed 600-700 KB/s, 4G on the other hand averages 6MB/s.
when I move back to college, I will have to test out 4g because it is covered in the location of my school.
Yea you should be happy with .8 mbs..u can do just about anything with that speed..I don't expect more more really..best I've gotten is about 1.6 mbs on 3g
My 3G speeds are garbage wherever I go. I can't use my phone unless im on Wi-Fi or 4G. Tired of this crap... -_-
fmedina2 said:
My 3G speeds are garbage wherever I go. I can't use my phone unless im on Wi-Fi or 4G. Tired of this crap... -_-
Click to expand...
Click to collapse
Same here
Sent from my PG86100 using Tapatalk
firmbiz94 said:
Yea you should be happy with .8 mbs..u can do just about anything with that speed..I don't expect more more really..best I've gotten is about 1.6 mbs on 3g
Click to expand...
Click to collapse
well .8 is the best i can get. usually it's around 300kbps. it makes me jealous when my friends verizon or att data speeds exceed 1mb.
I have had just over 1 a few times when testing near my apartment. I am close to down town dallas and very close to a tower.
I am sure it has to do with location, loading that sort of thing. I am sure my tower has been suped up to handle the daily work load of all the people in and around down town dallas. But at night when the usage is a lot lower the speeds definately go up.
Dont get me wrong, i have also had speed tests on the same tower being 200k down and 75k up. Then 9 or 10 hours later its sky high.
Get an Airave,,never see less than 1600kbps on it since I got it,,turn it off,,I can't call or use data,,7 miles from tower
Sent from my PG86100 using xda premium
customhdrider said:
Get an Airave,,never see less than 1600kbps on it since I got it,,turn it off,,I can't call or use data,,7 miles from tower
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
You can't carry an airrave around with you everywhere you go. Plus you need WiFi for it to work, so why not just connect to WiFi if your at home? You'll get alot more than 1600kbps. Were talking about the extremely poor 3g speeds without the use of an airrave/wifi.
What i don't understand is how i can have like 4-5 bars and only get 20-80kpbs.
Charliehustle said:
What i don't understand is how i can have like 4-5 bars and only get 20-80kpbs.
Click to expand...
Click to collapse
Cause your signal has hardly anything to do with your data speeds.
IM now getting h+ in manchester, I thought this was suppose to improve speed , I'm getting same speeds as on h ... ANY idea why, I'm on 3UK on a UN branded handset
Sent from my GT-I9100 using xda premium
Anyone ? What speed should I get on h+ ?
Sent from my GT-I9100 using xda premium
I got 750kb/s download on 3 bar H+. I'm gonna test on the area I got most with my iPhone 4. Most I got on 3G was 500kb/s 5 bars.
IM glad in not only one thanks according to internet should be 21mb download I dont even get that on my broadband
Sent from my GT-I9100 using xda premium
There is actually not much of a difference in speed, not most of the time at least.. Don't let the + in HSPA+ fool you. I too don't see any difference in speed between + and no + and i'm from Singapore.
Sent from my non-Apple device via XDA App
the H+ doesnt have to indicate a higher speed, higher speeds are possible with that yes, however it just shows that the network in that area has been upgraded.. speeds are much more dependent on how many many users are currently using that cell tower etc, and for sure you're ISP capped the speeds well well under the advertised 21Mbps that is "possible" on the technology...
Well I have experience with both H+ and H and I can say that with my operator H is much much faster and I usually get H+ outside of the city in villages etc...
I live in the capital city of my country so I am pretty sure they would use + in the city if it was faster instead of the countryside.
With H I usually get from 10 to 14mbps
With H+ 300-900 kbps max
But, of course I'm not an expert, so it may be just my ISP being crazy, or testing h+ on small scale, but why would it be slower ? questions questions questions !
thanks i got all excited when i saw the plus today
Sent from my GT-I9100 using xda premium
xeq544 said:
Well I have experience with both H+ and H and I can say that with my operator H is much much faster and I usually get H+ outside of the city in villages etc...
I live in the capital city of my country so I am pretty sure they would use + in the city if it was faster instead of the countryside.
With H I usually get from 10 to 14mbps
With H+ 300-900 kbps max
But, of course I'm not an expert, so it may be just my ISP being crazy, or testing h+ on small scale, but why would it be slower ? questions questions questions !
Click to expand...
Click to collapse
where are u to get upto 14mb ? i only get 10 on my proper broadband
Sent from my GT-I9100 using xda premium
I think there are two parts to the answer:-
1) Your phone's setup. There are various posts/threads here about possible "tweaks" such as disabling fast dormancy, editing system files etc.
2) Your service provider's upload/download data rate capping. Personally I find it scandalous that most providers have a hidden data rate cap on their users. They are upfront about the total data limits, but tend to hide the hidden rate cap somewhere behind their "Acceptable Use" policies.
Therefore even if you tweak your settings, you may well be further limited by your provider. I suggest you search this forum and the www for information on this practice and how you might be able to have data rate caps lifted or altered.
You get the speed you pay for. Okay, they always advertise A MAXIMUM SPEED OF XXMBPS!!!!! OMG OMG!!!111! but of course you'll almost never reach the maximum. Only in a perfect condition.
So I usually check the news in the morning and today (day before the announcement) I noticed that the web pages were loading super fast so I did Speed test and I'm getting crazy 2mbps/d and 1.3mbps/u! I'm usually in the 200kbps/140kbps. I figure that they're testing out beforehand to make sure its running well. What are you guys getting?
Sent from my MB855 using XDA App
287k down, 142k up. Central PA. But if I remember, NYC was @ the same. My 4G in NYC was like 9M down and 3M up? Cannot remember. My phone USUALLY flys as it is on 3G and I never really think about it.
It would be nice, I have never seen 3G speeds on any CDMA network in my area above 500k - including Verizon, I actually see better more consistent speeds with Sprint than VZW.
I have my doubts though, living in the sticks really does have advantages, but stuff like this sucks.
I just did the speed test and on 3g i got 2.34mbps down and .64 mbps up. Those are pretty standard numbers for me. I do have an airave at home so don' know if that is making a difference.
dsims7_2000 said:
287k down, 142k up. Central PA. But if I remember, NYC was @ the same. My 4G in NYC was like 9M down and 3M up? Cannot remember. My phone USUALLY flys as it is on 3G and I never really think about it.
Click to expand...
Click to collapse
My bad, I did not have my glasses on. 2.8Md/1.4Mu (missed some zeros). All Networks are improving 3G (the currently majority of their base model phones) by using different forms of compression for greater speeds. Oh well..........
I lost 3g data connectivity entirely today. I have full bars like I usually do but can't get any data through.
magui43212 said:
I lost 3g data connectivity entirely today. I have full bars like I usually do but can't get any data through.
Click to expand...
Click to collapse
My data connection is suddenly being very intermittent, too.
I'll try updating my PRL and Profile.... See if that helps at all.
My websurfing is flaky as heck, my Google Talk connection keeps going in and out (and taking a long time to re-login) and I can't seem to update the Android market.
I had just run the "supercharger v6" script, but that shouldn't affect my data connection.... right????
Well let's hope for the best. I'm getting full bars everywhere in Anaheim, CA and speed is constant. I just watched my first youtube video without a single hiccup on 3G
Sent from my MB855 using XDA App
3g improvements
radrian92 said:
So I usually check the news in the morning and today (day before the announcement) I noticed that the web pages were loading super fast so I did Speed test and I'm getting crazy 2mbps/d and 1.3mbps/u! I'm usually in the 200kbps/140kbps. I figure that they're testing out beforehand to make sure its running well. What are you guys getting?
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I have also noticed improvements in 3g speed from ohio to texas, been testing at points from columbus to dallas fort worth, have seen 2 meg speeds in fort worth and consistently higher speeds overall.
My guess is with the onset of the IPHONE on sprint, sprint has had to get their 3g act together as the IPHONE does not support LTE or WIMAX it is solely 3g so they cannot afford to continue to piss people off with poor 3g performance. I am now seeing the high speeds I used to see before the smartphones came along with my sanyo mm 9000.
cutter2668 said:
I have also noticed improvements in 3g speed from ohio to texas, been testing at points from columbus to dallas fort worth, have seen 2 meg speeds in fort worth and consistently higher speeds overall.
My guess is with the onset of the IPHONE on sprint, sprint has had to get their 3g act together as the IPHONE does not support LTE or WIMAX it is solely 3g so they cannot afford to continue to piss people off with poor 3g performance. I am now seeing the high speeds I used to see before the smartphones came along with my sanyo mm 9000.
Click to expand...
Click to collapse
3g in my house is usually ~1mb down / 700kb up or so..
Just did a test - 300kb down / 500kb up. This is in the suburbs of san francisco..
(I think we're feeling the iphone saturation..)
I used to get ~1mbps down but in the least three months I've only been getting 30-150 kbps down and 30 kbps up. Totally unusable.
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
EDIT: So I really need help troubleshooting the issue. I'll logcat, dump, or whatever necessary. I've been in many cities/areas and this problem persists: if I haven't used data or the phone hasn't been backgrounding traffic, it'll take anywhere from 5 to 30 seconds before a connection is made when I try to access an internet-related function on my phone (even though 3G/H is displayed in the status bar). Out of shear frustration (this has been happening since I got the phone, under stock ROMs and now under AOKP), I tried messing with *#*#info#*#*. I changed WCDMA-preferred to WCDMA-only -- no improvement. Oddly, I also tried GSM-only. Well, great improvement! Even though I only have E, there is absolutely no latency in waiting for a connection -- so pages and other data end up loading faster on Edge than 3G !
I have absolutely no idea why my phone takes forever to make a connection. Under 3G, I see only but a few upstream network activity blips (even under full bars) for as much as 30 seconds, before there is any downstream activity (and when it comes, it comes). Can anyone help???
P.S.: I'm going to try using a friend's SIM later for comparison.
joebobjoe said:
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
Click to expand...
Click to collapse
Because they both share the 1900MHz band I believe.
Red5 said:
Because they both share the 1900MHz band I believe.
Click to expand...
Click to collapse
I'd like to know if it shows up for anyone else?
joebobjoe said:
I'd like to know if it shows up for anyone else?
Click to expand...
Click to collapse
On AOKP it does for me too. Just ignore it.
Red5 said:
On AOKP it does for me too. Just ignore it.
Click to expand...
Click to collapse
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
joebobjoe said:
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
Click to expand...
Click to collapse
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Red5 said:
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Click to expand...
Click to collapse
Well that's strange. I'm used to phones displaying what network-level they are capable of. So why would it not just display H for HSPA+ when HSPA+ service is available, instead of only displaying under traffic.
I'm going to go ahead an edit this thread to help troubleshoot what I think to be the main issue.
After some trials I see that the network indicator switches back and forth between 3G and H a few tines before making the connection and transmitting data. Hmmm...
Basically, "4G" will eat your battery alive so the phone idles at 3G and jumps to H+ only when you use data. If you were on a "stock" ATT rom it would always read H+, but this is technically false since when its idle the phone sits in 3G. CM9 and AOKP accurately display it which is why you see the switch.
Sent from my SGH-I777 using Tapatalk
I have a HTC Amaze for a phone and the Galaxy S2 is my media player. Sometimes, when I don't feel like carrying around two devices, I put my T-Mobile SIM in the galaxy and use it as my phone. I must say, Edge is not as slow as I remember it being. Maybe speed is contingent on network traffic. If thats the case, instead of using crowded "faux G" networks, I may defer to Edge to save battery life and get good dl/ul rates.
My phone does the same thing. I noticed it sometime ago. When idle 3g. Internet I get H+. This is with both Shostock2 and Phone Bricker. I was curious to know too but just blew it off because it really doesnt make any difference to me as long as Im getting decent speeds. Im not even with ATT anymore. Went with Straight Talk. Which uses ATT towers. Cant beat the price!!
They don't have the correct apns, but that symbol problem is because the phone doesn't use hspa+ passively, only actively. It causes some lag when downloading, but it is faster fit large data. But your problem is due to a supposed imei range with bad modems. Rehash stick, fix the triangle, and return it.
Sent from my GT-I777 using xda premium
Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!
vivftp said:
Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!
Click to expand...
Click to collapse
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..
hamdogg said:
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..
Click to expand...
Click to collapse
It seems to happen on a frequent basis. At least a couple of times a day when I happen to be paying attention to my phone.
I've never actually used stamina mode, and it's always been off.
How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk
LordManhattan said:
How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?
:good:
vivftp said:
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?
Click to expand...
Click to collapse
EDGE is 2G. so turn off LTE and HSPA+ and see if it does it.
I don't have the LTE equipped phone so I'm not sure if these hardware functions will switch on and off randomly.
It sounds like your hardware is switching between 4g and 3g. problem is that both wont work simultaneously, so you would get this drop off. solution is that build prop edit i gave you.
But then you'd have 4g on all the time. so if you don't want that then turn it off manually.
Try these.
Edit your build.prop file.
(do you know how to do this??)
and insert these.
___________
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=20
ro.ril.hsupa.category=7
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
______________
that will stop hardware switching between 2g/3g/4g
as well as make it faster.
Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.
LordManhattan said:
Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.
Click to expand...
Click to collapse
Thanks. Just made the change and will keep an eye on it over the next day or two.
Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.
vivftp said:
Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.
Click to expand...
Click to collapse
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk
LordManhattan said:
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.
vivftp said:
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.
Click to expand...
Click to collapse
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk
LordManhattan said:
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Sorry to bump an old thread, but I just want to say that I'm having the exact same issue. I thought it might have occurred after I installed a custom room but I'm now back on stock and still experiencing 4 bars immediately dropping to no service and then going back to 3 or 4 bars before slowly dropping back to zero. I figured it could be LTE, so I experimented with all settings under mobile networks to no avail. I try the same Sim in my note 2 in the same location and I have no issues. I believe this is an issue with the antenna or a general hardware fault. My phone is the c6806, originally on Bell but being used on Telus. I have already contacted Sony but they are giving me the runaround
Anyone know how the warranty is handled in Canada? Anyone else have this problem?
Signal issues
Sorry I'm restarting this thread one more time.. But anyone figure out a fix? I'm having the same problem on a brand new phone... I had the same phone before I lost it. Got it again but these signal dropping issues now . Never had these on my previous cc6806