Related
After installing a ROM and rebooting the phone everything seemed to work fine. The only problem is that it I can not install any programs because it thinks that I have no space available.
Now I did not backup my system... I do have an older backup on my laptop... but I can not install clockwork because there is no space.
please help!
Thanks in Advance!
it might be a problem with the ROM.
ODIN back to stock, then flash that same rom again, if its still there, contact the DEV and tell him, because its their fault.
If it gets fixed with re-flash something went wrong while flashing and that happened.
What ROM did you install? Was it ODEX or DEODEX?
I agree with the above post, if an ODIN doesn't solve the problem, it sounds like a problem with the rom, but a little more info on your situation wouldn't hurt.
Thanks for the input... I hope to resolve this before tomorrow! The ROM was Bionix Fusion
I am new to this and probably should have researched a little more. lol
Ok I have downloaded the ODIN3 v1.00
How do I ODIN back to stock?
I have the Samsung Vibrant,
Having the same issue when running Odin with Eugene_2E_JK2_Froyo ...I ran Odin to fix a brick and didn't know the history of the phone. This is the only tar that will boot the phone all the way up, but I get the 0.00 available space error too. I tried stock and almost get a full boot up, but then goes black before going to main screen... I've tried many different combos including T959UVJFD.tar + s1_odin_20100512 pit , 512 pit + T959UVJI6, T959JL5, etc...
suggestions?
The ROM itself seems nice... I like the changes I've seen. For some reason it does not recognize the space that is available on the SD card as space for Applications. I've read a post somewhere about repartitioning the SD card in ODIN. ROM manager is s pretty much useless without clockwork recovery installed.... can not install it without space available. I tried repartitioning in ODIN but would not do it... is this something that could work? Maybe I am doing something else wrong,... or any other suggestions?
At this point I will be happy to go back to factory settings then start over...
Jayson Simmons said:
The ROM itself seems nice... I like the changes I've seen. For some reason it does not recognize the space that is available on the SD card as space for Applications. I've read a post somewhere about repartitioning the SD card in ODIN. ROM manager is s pretty much useless without clockwork recovery installed.... can not install it without space available. I tried repartitioning in ODIN but would not do it... is this something that could work? Maybe I am doing something else wrong,... or any other suggestions?
At this point I will be happy to go back to factory settings then start over...
Click to expand...
Click to collapse
I agree... This thread would probably get more attention in the development section, but I may be wrong. I will keep trying things and let you know if I come up with something...
Actually now I am having the same problem... Went back to the original using ODIN now when the phone boots up it goes to a blank screen and will not go any further!
Jayson Simmons said:
Actually now I am having the same problem... Went back to the original using ODIN now when the phone boots up it goes to a blank screen and will not go any further!
Click to expand...
Click to collapse
What files did u use to odin back
Sent from my SGH-T959 using XDA App
s1_odin_20100512.pit
T959UVJFD
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Jayson Simmons said:
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Click to expand...
Click to collapse
Thanks for posting your resolution in the event this happens to someone else down the line. Glad you got it up and running.
Yup that is the true stock firmware... try this, it might help and it might not? when you boot your phone and it loads up, format your internal and external sdcard. (back up first) then reboot.... see if that helps. if not, odin the stock rom again. right now i'm shooting at flies with a BB gun so it is worth a try anyway...... and i'll try and research it for ya......
oops i didnt know you found a way....my bad. glad you got it working!!!!
So is that the way to fix it then? I just want to know if anyone else has tried it with no problem before i do it. Also, will you be able to flash back to stock?
I flashed the files that were included with the ODIN package and i now don't have any memory for applications also is the only way to fix this issue by using ODIN again or has someone found another method?
Did you use OCLF at any time previously?
Sdobron said:
Did you use OCLF at any time previously?
Click to expand...
Click to collapse
I tried voodoo for the first time and couldn't get past the vibrant screen i then used the odin package the tmobile default files and got to the tmobil boot screen but the screen goes black and nothing happens my hard ware keys were on but that's it so then i used eugenes package based off the tmobile leak and that's where i'm at now it works but no application memory available.
so i want to see if i can just use ODIN with the file that is up a couple of posts to get my app memory back
How much available app space are we suppose to have?
So I know the phone has 2GB of app space, but when I totally wipe everything and go back to stock, it says only about 1.7GB.
go to settings, then sd card and phone storage
scroll all the way down to application storage
how much available space is it suppose to have under stock conditions?
Jayson Simmons said:
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Click to expand...
Click to collapse
Can you post the EUGENE373_SamsungS_Froyo_PDA file? I flashed Eugene_2E_JK2 Froyo, and then tried flashing the original JFD Stock Rom, but it gave me a black screen after the Galaxy S screen. Also, it didn't wipe the data for me.
has anyone fixed this? i have the same problem im stuck
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
Hello,
I consider myself a fairly technical person, and I recently had my phone lock up while running Nero V3 for my Samsung Vibrant. When I tried to reboot (battery pull) my internal SD was corrupted, so i decided to return to stock. I was not running any lag fixes at this time. Upon flashing to stock with Odin, I was greeted with a black screen and 4 lights. I've been trying everything to fix this. I saw that many people with the same issue have had luck flashing Eugene's Froyo that Doesn't Brick, and then flashing the JFD stock rom. I tried this as well, and have had no luck.
I am stuck. I don't know what to do. I have managed to load CWM recovery, and i can adb into the device, but when I try to push an update.zip, I get an I/O error.
Any help would be appreciated. I'm just not suer where to go from here. I really believe if I could just format and re-partition the internal SD, I would be able to get it all back...
Thanks.
When you say you flashed "eugenes froyo that doesn't brick", how did it not work? Were you able to get into download mode and odin the proper files? Did it error out?
Sent from my SGH-T959 using XDA App
cheesmo said:
Hello,
I consider myself a fairly technical person, and I recently had my phone lock up while running Nero V3 for my Samsung Vibrant. When I tried to reboot (battery pull) my internal SD was corrupted, so i decided to return to stock. I was not running any lag fixes at this time. Upon flashing to stock with Odin, I was greeted with a black screen and 4 lights. I've been trying everything to fix this. I saw that many people with the same issue have had luck flashing Eugene's Froyo that Doesn't Brick, and then flashing the JFD stock rom. I tried this as well, and have had no luck.
I am stuck. I don't know what to do. I have managed to load CWM recovery, and i can adb into the device, but when I try to push an update.zip, I get an I/O error.
Any help would be appreciated. I'm just not suer where to go from here. I really believe if I could just format and re-partition the internal SD, I would be able to get it all back...
Thanks.
Click to expand...
Click to collapse
If you are able to boot into clockwork recovery you can format your internal sdcard there. That should fix your corruption issue. After that I would boot into download mode and Odin stock JFD with re-partition clicked. Hopefully that gets you up and running. Then if you actually NEED any files from you internal sdcard (like pictures) there are programs out there that let you recover items off erased harddrives. Just be sure to do that before filling up your sdcard with new stuff. Hope this helps and good luck.
Eugene's Froyo that doesn't brick gave me an error, and I read that it was supposed to. So from there, I got into download mode and used Odin to install the JFD Stock Rom. Odin was always successful when it came to installing and rebooting my device.
Recovery "says" that it sucessfully formats my sd card, but the files remain, and I still cannot boot. When I use Odin to flash any other ROM, I get the same result. I either get a black screen with 4 lights, or it gets hung up on the Samsung Vibrant screen.
Also, I'm not concerned with any files on the internal SD.
If you can get into cwm recovery and download mode, you should be able to get out of this. Try to format sd from cwm as whitehawk suggested. Did jfd odin error out as well? Can you restore from cwm?
Sent from my SGH-T959 using XDA App
cheesmo said:
Recovery "says" that it sucessfully formats my sd card, but the files remain, and I still cannot boot. When I use Odin to flash any other ROM, I get the same result. I either get a black screen with 4 lights, or it gets hung up on the Samsung Vibrant screen.
Also, I'm not concerned with any files on the internal SD.
Click to expand...
Click to collapse
Didyou repartition in odin when you flashed back to stock or on eugene's froyo that doesnt brick?
Sent from my SGH-T959 using XDA App
Yes, I re-partitioned in Odin. I've tried several times, and the last time, I repartitioned on the stock ROM.
Thanks, NightHawkx! I am giving that a try now. crossing fingers...
ODIN says:
"<ID:0/010> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)"
Phone reboots, blank screen. All 4 buttons lit up when I tapped home. Nothing more.
I wonder if it's something wrong with my device. It seems like it should be reparable. I would rather not take it to T-mobile. I don't know what they'd so since it's been rooted and had custom roms.
cheesmo said:
I wonder if it's something wrong with my device. It seems like it should be reparable. I would rather not take it to T-mobile. I don't know what they'd so since it's been rooted and had custom roms.
Click to expand...
Click to collapse
You need to delete the jfd file and the 512 pit file from your computer and redownload them
I would be happy to try. Where should I get them from?
Also, is there a way to delete my Internal SD from my pc or adb?
Downloading now from Vibrant Bible Sticky post link.
Same result.
Try this fix and you should also take out your sim card and your external sd card
Same result.
I wonder if, since Nero is stuck on my phone, and the file system is unreachable, is there a way to load Nero on my phone? I can't from CMRecovery, I tried. Can I Odin a copy of that rom on there? Just long enough to remove the files and reflash?
cheesmo said:
upon flashing to stock with odin, i was greeted with a black screen and 4 lights.
Click to expand...
Click to collapse
there. Are. Four. Lights!!!
cheesmo said:
Same result.
I wonder if, since Nero is stuck on my phone, and the file system is unreachable, is there a way to load Nero on my phone? I can't from CMRecovery, I tried. Can I Odin a copy of that rom on there? Just long enough to remove the files and reflash?
Click to expand...
Click to collapse
I believe the key is you need to find a voodoo kernel you can push via odin. I searched a little and found this post http://forum.xda-developers.com/showthread.php?t=877800 If you scroll down in the OP you will find a section called "Downloads" the bold text in gold will link you to a voodoo .tar kernel.
Hope this helps
Hmm...maybe a dumb question...but did you wipe data in recovery before rebooting?
Sent from my SGH-T959 using XDA App
nickmcminn60 said:
You need to delete the jfd file and the 512 pit file from your computer and redownload them
Click to expand...
Click to collapse
If the phone cannot get past the black screen, just delete the CWM zip and tell t-Mobile it just stopped working, they wont be able to get further than you and will give you a new phone.
I was running trigger 3.0.1 and decided to flash cm7, i went through the process and when i rebooted at the end, the cm7 logo flashed and returned me to recovery. I used Eugenes nor brick froyo from odin and now i cannot install rom manager or anything else because it says i have zero available memory even though i have 14.63 gb of available phone storage and 3.69gb of sd card storage. I have tried multiple times to repartition via odin but i still cannot install anything.
Any ideas ?
System memory and phone memory are two different things. Try removing some bloat apps if you have any, that should free up system memory.
Sent from my rough sketch of a Vibrant on a brick.
Are you still running Eugene's no-brick? You need to Odin back to stock (preferably JFD).
should partition be on in odin ? for going back to 2.1
all of my apps say that they are taking up 0.00 mb, im confused.
odin, and i always do re-partition, but idk if you should or not, hasn't hurt me ever.
xriderx66 said:
odin, and i always do re-partition, but idk if you should or not, hasn't hurt me ever.
Click to expand...
Click to collapse
If Im not mistaken, some consider it very brickable.
Abu-7abash said:
If Im not mistaken, some consider it very brickable.
Click to expand...
Click to collapse
Really?! I always check it... Well... Its auto checked dunno if its just me
ive got the exact same problem. how did you solve this? i flashed eugenes tar and pit.. im now using odin to get back to stock JFD. ill update w results.
xriderx66 said:
Really?! I always check it... Well... Its auto checked dunno if its just me
Click to expand...
Click to collapse
You should only check repartition when flashing JFD. The phone will be soft bricked if you select repartition on JI6
You probably gonna need adb & parted to get your partitions fixed.
Try this guide: http://forum.xda-developers.com/showthread.php?t=937072&highlight=black+screen+death
Okay, so after installing the kang build 25 ICS for the vibrant, everything went fine. Randomly I get a random reboot and my phone says there was an "encryption error" and that I have to do a factory reset. Since I already had everything backed up, I didn't mind the data wipe. When it went rebooted the CWM screen came up and started wiping everything but when it got to the "formatting data" part, it failed. I tried this many times and it kept failing... SO, I decided to ODIN back to JFD. After doing so, all I get is the Vibrant screen, then an instant shut down. I even tried Eugene's old No Brick Froyo PDA, then tried to reinstall the JFD image, but got no luck.
Question is: What should I do now?
Any help will be GREATLY appreciated. Thanks!
Its a little involved but It's all I could find to help buddy
http://www.youtube.com/watch?v=Rdn5GoRjhn0
It's not the easiest thing in the world to accomplish but It is a guarantied way to get your vibrant into successful download mode to reflash to stock.
At the least something to get you started
Good Luck!
Perhaps it could be a bootloader problem? If you're sure you are doing Odin right, including repartition with the pit file, you could look at your SBL.
.
Sorry but what is SBL?
lolrus101 said:
Sorry but what is SBL?
Click to expand...
Click to collapse
I dont know how to explain it very well lol but to check if the rom you are trying to odin has the sbl in it. Rename it and put a .zip at the end. Then extract to see if its in there it should be named "sbl". To change it back simply delete the .zip off the original file.
JFD
I'm trying to ODIN the original JFD firmware, and I just checked that it does not have SBL in it.
Try odining a rom that has the sbl file in it thats probably why its not working.
---------- Post added at 04:14 AM ---------- Previous post was at 04:09 AM ----------
Here http://forum.xda-developers.com/showthread.php?t=1278683 you need to have java installed to open it
Just tried the Heimdall thing. No luck. As soon as it says rebooting, it goes to the vibrant screen, then the battery charging screen, then continues to bootloop. Same thing happened with Odin
why don't you try what I did
http://forum.xda-developers.com/showpost.php?p=23056603&postcount=10
lolrus101 said:
I'm trying to ODIN the original JFD firmware, and I just checked that it does not have SBL in it.
Click to expand...
Click to collapse
The SBL is the Secondary Boot Loader, which is loaded by the Primary Boot Loader.
I haven't personally encountered any roms which also flash bootloaders.
I did manage to get my phone bootlooped in some weird way which apparently could only be fixed by reflashing the SBL. Note: flashing bootloaders is more dangerous than regular roms.
I am presently running a GB SBL from this thread:
http://forum.xda-developers.com/showthread.php?t=1117990
ian577416 said:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
It's not the easiest thing in the world to accomplish but It is a guarantied way to get your vibrant into successful download mode to reflash to stock.
At the least something to get you started
Good Luck!
Click to expand...
Click to collapse
a 301kohm jig is ONLY good if you have a valid Initial Bootloader, Primitive Bootloader, Partition Table AND Secondary Bootloader. If you damage any of those, a 301kohm jig won't work.
Use UnBrickable Mod. http://forum.xda-developers.com/showthread.php?t=1277056
Flashed the GB bootloader and no luck either . Flashed back to the froyo one, and got the data wipe error again, the phone rebooted, and now its at "KERNEL PANIC - UPLOAD MODE"
AdamOutler said:
a 301kohm jig is ONLY good if you have a valid Initial Bootloader, Primitive Bootloader, Partition Table AND Secondary Bootloader. If you damage any of those, a 301kohm jig won't work.
Use UnBrickable Mod. http://forum.xda-developers.com/showthread.php?t=1277056
Click to expand...
Click to collapse
I have already tried the Heimdall method... and I can access download mode. I think the thing that is causing the bootloop is that the Data wipe fails after a restore. Thats when the bootloop kicks in
lolrus101 said:
I have already tried the Heimdall method... and I can access download mode. I think the thing that is causing the bootloop is that the Data wipe fails after a restore. Thats when the bootloop kicks in
Click to expand...
Click to collapse
If you did Odin/Heimdall to stock after flashing the SBL, and it is still messed up, its beyond me and I'd really like to know the fix. Wiping should be irrelevant after Odining to stock.
If you are getting errors in recovery when you try to wipe/format/restore, that indicates a mismatch between the kernel and the partitioning or filesystem.
cashmundy said:
If you did Odin/Heimdall to stock after flashing the SBL, and it is still messed up, its beyond me and I'd really like to know the fix. Wiping should be irrelevant after Odining to stock.
If you are getting errors in recovery when you try to wipe/format/restore, that indicates a mismatch between the kernel and the partitioning or filesystem.
Click to expand...
Click to collapse
SO the thing is I used the GLITCH kernel with vibrant build 25... I dont think I was supposed to... could that have caused the problem? maybe a voodoo problem?
There are two glitch kernel series that I know of, one for CM7 and one for CM9 and ICS (I think, not sure, that all ICS builds and CM9 use the same basic filesystem scheme).
All stock builds use a Samsung FS scheme which is different from the two above. So there are at least three mutually-incompatible families of FS+kernel pairs.
I used the CM9 kernel I think...
After the installation went fine, I got the encryption error which told me to reboot. as soon as I did, I got the Data wipe fail. Any ideas?
Encryption Error
I'm going through the same thing. I had my phone at ICS passion for months, last night I noticed my phone was in a boot load screen, but it was dimmed. I simply went and took out my battery. . maybe not the best idea, cause I'm now unable to flash back to stock.
I used odin to go back to stock, but I keep getting a boot load/reset. Nothing is happening.
If anyone has found out more on this, please let me know. Thank you so much.
tabthelab said:
I'm going through the same thing. I had my phone at ICS passion for months, last night I noticed my phone was in a boot load screen, but it was dimmed. I simply went and took out my battery. . maybe not the best idea, cause I'm now unable to flash back to stock.
I used odin to go back to stock, but I keep getting a boot load/reset. Nothing is happening.
If anyone has found out more on this, please let me know. Thank you so much.
Click to expand...
Click to collapse
If you are still able to access Clockworkmod Recovery CWM (NOT STOCK RECOVERY) then try this:
http://forum.xda-developers.com/showthread.php?t=1447303
Otherwise just give up. There is currently no fix for this bug as of now.
This is really getting out of hand ICS rom devs should put a big caution sign on their thread(s) stating the following:
WARNING THIS ROM WILL BRICK YOUR DEVICE!!!
Goodluck... in the meantime find yourself a spare phone like i did cuz you certainly ain't fixing this one.
Sent from my Galaxy Nexus using XDA
mother of god
I hope this helps you. I finally, after hours of nothing, tried to use Odin to flash to 2.2 froyo. cha ching. got in.
tar file I used here: http://forum.xda-developers.com/showthread.php?t=833024&page=49
worked for me. I hope it helps you