Does it work to send a already made macro signal from a logitech universal remote control, in the learning mode on the tablet, for ex turn all your devices on with one button?
alexmp84 said:
Does it work to send a already made macro signal from a logitech universal remote control, in the learning mode on the tablet, for ex turn all your devices on with one button?
Click to expand...
Click to collapse
I dont have a logitech remote but from what I read it sends a series of ir signals. And the tablet only learns one at a time. So I doubt macros can be transfered to the tablet.
You could always try..
When I was setting up the universal remote for a TV that was compatible, I accidentally taught the volume up button to bump the volume two levels, so it could probably receive multiple signals at once.
Afaik it's not possible to use macros.
You can assign the buttons to different devices, like channel +/- to your satellite stb and volume +/- to your a/v receiver, but you can't turn on your stb, your TV and your a/v receiver with one button.
daClaus said:
Afaik it's not possible to use macros.
You can assign the buttons to different devices, like channel +/- to your satellite stb and volume +/- to your a/v receiver, but you can't turn on your stb, your TV and your a/v receiver with one button.
Click to expand...
Click to collapse
That's probably the best way of doing it, especially because you can rename the buttons too, you could have a remote with multiple power buttons.
I was able to successfully pair my Sony NSG-MR5U Remote (from my old Google TV NSZ-GS7)
Keypad works great, directional pad works but the center button on the pad does not function as the "select" button. If you press the "
Enter" key, that serves as the select button as well as the play/pause option on youtube. The mouse/touch pad also does not seem to work as well. The back button and the home button work fine as well. Still playing around with it trying other buttons to see what they do in other apps.
To enable or force pair mode:
Hold Fn + the center button between the navigation arrows on the remote side. you will notice the green light flashing in a slightly different pattern than while pressing the buttons.
The 1st try found the remote but failed when trying to pair. I played around with the Fn + center button a couple more times during paring mode and it finally paired successfully.
This will more than likely work with NSG-MR7U as well.
chibluboy said:
This will more than likely work with NSG-MR7U as well.
Click to expand...
Click to collapse
I can verify that all that you have said is true for the NSG-MR7U as well. Tried it all this morning.
Someone from the kodi forums seems to have worked on a patch for the Linux Kernel, but it seems abandonned as the last threads are pretty old.
Here is the informations I've found :
The kodi forum (look the jflatt post where he says everything but the accelerometer works) : http://forum.kodi.tv/showthread.php?tid=153504
The patch (by Jason Flatt, or jflatt) : http://www.spinics.net/lists/linux-input/msg26324.html
I don't have any coding abilities, maybe some xda-dev could help create a working module for Android.
Yes...mine works as well, however the center ok button on the directional pad does not work for some reason...very annoying.
Select/OK Button
Well I got the select button in the middle of the direction pad working by installing External Keyboard Helper an app in the play store (web play store!). I then created a custom keyboard layout and programmed the select button as enter!!! Almost perfect, but still no mouse!
I would totally buy one of these if there was a way to get the mouse working! This remote was very well designed and would go great with my NP
I had been trying to get this damned remote to work with my stuff for years. short of finding a developer to create a proper working driver for it, i dont think we will have much success getting it to work completely functional with anything.
Although, i wonder if anyone with the original google tv player this remote works with, can somehow find and pull the android drivers from it? maybe someone here can tweak the driver to make the mouse and other functions work with the nexus player?
I've been playing around trying to figure something out with a different device, and found that in the root directory, going into /system/usr/keylayouts brings up a few files with a .kl extension to them. Its in these kl files that some devices are configured with scan codes. If we can find the proper scan codes for this remote, as well as the device and vendor ID, I think we might be able to create our own kl file specifically for this remote to make it do whatever we want. I think for everything except the mouse/touchpad unfortunately.
Personally im busy and wont be able to jump right onto looking into this, but if anyone is willing to beat me to it, a little research might help configure it. i dont think the mouse/touchpad is affected by this file though: there was only one other file in the folder for a device with an existing mouse/touchpad (the logitech revue, to be exact) and i dont recall seeing any sort of settings related to a touchpad or mouse other than the left and right mouse buttons, but its a step in the right direction.
You can find the device and property ID by pairing the remote to your windows pc, going into device manager and looking in properties for the remote. Not sure how to find scancodes, but if anyone is familiar with Event Ghost, I seem to recall being able to play with the remote in that program (paired to my pc) and i think i was able to pull up scancodes through the programs log. not positive though. just mentioning all of this because unless someone beats me to it, i might not be able to get to it for another month myself.
do you all think that a PS3 or PS4 remote will connect to the nexus player
Not working for me
Any idea why?
I Hold Fn + the enter key between the navigations buttons on the NSG-MR7U, hit the "add accessory" button on the Nexus Player, but it just goes on searching for accessories without finding anything. The led on the remote's side panel is blinking quickly, but as said nothing seems to be happening.
Thanks,
Roy
With the Sony Nsz gs7 remote, will I be able to control my TV & Sony audio system all by itself without connecting the Sony google tv? I understand Sony google tv has loop through and IR sensor which could be programmed for our devices. My requirement with TV & audio system is going to be very limited like power, input toggle & volume controls. Can anybody please confirm?
shahul_555 said:
With the Sony Nsz gs7 remote, will I be able to control my TV & Sony audio system all by itself without connecting the Sony google tv? I understand Sony google tv has loop through and IR sensor which could be programmed for our devices. My requirement with TV & audio system is going to be very limited like power, input toggle & volume controls. Can anybody please confirm?
Click to expand...
Click to collapse
You will not be able to control other items of equipment like you did when it was connected to the NSZ-GS7. The remote is a Bluetooth remote only. It was able to do so because the NSZ-GS7 had the ability to transmit IR. I use it connected to my media server PC, which also has an IR receiver/transmitter, and Event Ghost to turn on/off my system, control volume, and switch inputs (and d-pad and transport controls if I'm using Windows Media Center or Power DVD). But it can only be connected to a single device at a time, so I still use the stock remote to control the Nexus Player. Yeah, it's not a single remote solution, but it's the best I could come up with.
ninja_rancher said:
You will not be able to control other items of equipment like you did when it was connected to the NSZ-GS7. The remote is a Bluetooth remote only. It was able to do so because the NSZ-GS7 had the ability to transmit IR. I use it connected to my media server PC, which also has an IR receiver/transmitter, and Event Ghost to turn on/off my system, control volume, and switch inputs (and d-pad and transport controls if I'm using Windows Media Center or Power DVD). But it can only be connected to a single device at a time, so I still use the stock remote to control the Nexus Player. Yeah, it's not a single remote solution, but it's the best I could come up with.
Click to expand...
Click to collapse
Thanks for the detailed response. I hoped Sony ps3 remote would solve my problem but unfortunately I was not able to pair to Nexus player because of the pairing code issue. If only it had worked it would have been my ideal single remote.
---------- Post added at 05:15 AM ---------- Previous post was at 05:11 AM ----------
ninja_rancher said:
You will not be able to control other items of equipment like you did when it was connected to the NSZ-GS7. The remote is a Bluetooth remote only. It was able to do so because the NSZ-GS7 had the ability to transmit IR. I use it connected to my media server PC, which also has an IR receiver/transmitter, and Event Ghost to turn on/off my system, control volume, and switch inputs (and d-pad and transport controls if I'm using Windows Media Center or Power DVD). But it can only be connected to a single device at a time, so I still use the stock remote to control the Nexus Player. Yeah, it's not a single remote solution, but it's the best I could come up with.
Click to expand...
Click to collapse
Thanks very much for this info. I am yet another person who loves this little remote. I have the MR7U and am attempting to use it with my windows 7 Pc running Kodi. So far I got it paired to my Samsung Note 5 just to play around with. I still need a Bluetooth dongle for my PC, are there any you recommend? Also, I am interested in what you used as an IR transmitter for your PC. I read about Eventghost and have an idea of what it's about. I did notice what you said about the "ok" button not working. I have a harmony remote with IR and RF but I really need the keyboard so I've committed to the idea of using the MR7U and retiring the Harmony. I'm confident I can get the MR7U to do what I want with kodi, but I want to be able to use it to also transmit IR to my Sony receiver and Bravia TV. Can I use the PC IR transmitter to turn on the TV, control the volume on my receiver and control Kodi simultaneously? Any info shared is greatly appreciated!
Jaygatesny said:
Thanks very much for this info. I am yet another person who loves this little remote. I have the MR7U and am attempting to use it with my windows 7 Pc running Kodi. So far I got it paired to my Samsung Note 5 just to play around with. I still need a Bluetooth dongle for my PC, are there any you recommend? Also, I am interested in what you used as an IR transmitter for your PC. I read about Eventghost and have an idea of what it's about. I did notice what you said about the "ok" button not working. I have a harmony remote with IR and RF but I really need the keyboard so I've committed to the idea of using the MR7U and retiring the Harmony. I'm confident I can get the MR7U to do what I want with kodi, but I want to be able to use it to also transmit IR to my Sony receiver and Bravia TV. Can I use the PC IR transmitter to turn on the TV, control the volume on my receiver and control Kodi simultaneously? Any info shared is greatly appreciated!
Click to expand...
Click to collapse
Even though it's slightly off-topic for using the MR5U/MR7U with the Nexus Player, I'll try and answer some of your questions. First, as far as the PC Bluetooth dongle goes, I just bought a generic cheap one off of eBay for under $5 (USD). Just search for 'usb bluetooth dongle' or 'usb bluetooth adapter'. As far as the "OK" button not working, I believe that was only when it was directly paired with the Nexus Player. All buttons seem to work fine for me when paired with my PC.
Second, I am using a Gateway USB IR receiver (like http://www.ebay.com/itm/GATEWAY-USB...967892?hash=item33ad7cc714:g:PUIAAOSwnH1WWmvY). Also cheap, also off of eBay. It used to be used for receiving IR as well when I had the Sony NSZ-GS7 and I had it blasting its TV and receiver IR codes to my PC instead. But now I just use it as an IR emitter controlled by EventGhost.
You should be able to do everything you want as far as device and app control. The only gotcha I encountered is that I had to disable the Windows 'Human Interface Device Access' service (hidserv). Because the remote pairs as a HID device, there are some buttons that Windows was interpreting automatically. Like the volume and menu buttons. If you want volume to control your receiver, then you need to disable the service to prevent Windows from adjusting its own volume. But it's all very doable. I use the MR5U remote to power my enter system on (TV, receiver), change volume of my receiver, switch inputs on my receiver, and control Windows Media Center or PowerDVD when I have to switch away from the Nexus Player to watch live TV or play a physical disc that I haven't ripped into Plex yet. Just have to have the time and the determination to do it.
ninja_rancher said:
You will not be able to control other items of equipment like you did when it was connected to the NSZ-GS7. The remote is a Bluetooth remote only. It was able to do so because the NSZ-GS7 had the ability to transmit IR. I use it connected to my media server PC, which also has an IR receiver/transmitter, and Event Ghost to turn on/off my system, control volume, and switch inputs (and d-pad and transport controls if I'm using Windows Media Center or Power DVD). But it can only be connected to a single device at a time, so I still use the stock remote to control the Nexus Player. Yeah, it's not a single remote solution, but it's the best I could come up with.
Click to expand...
Click to collapse
ninja_rancher said:
Even though it's slightly off-topic for using the MR5U/MR7U with the Nexus Player, I'll try and answer some of your questions. First, as far as the PC Bluetooth dongle goes, I just bought a generic cheap one off of eBay for under $5 (USD). Just search for 'usb bluetooth dongle' or 'usb bluetooth adapter'. As far as the "OK" button not working, I believe that was only when it was directly paired with the Nexus Player. All buttons seem to work fine for me when paired with my PC.
Second, I am using a Gateway USB IR receiver (like Also cheap, also off of eBay. It used to be used for receiving IR as well when I had the Sony NSZ-GS7 and I had it blasting its TV and receiver IR codes to my PC instead. But now I just use it as an IR emitter controlled by EventGhost.
You should be able to do everything you want as far as device and app control. The only gotcha I encountered is that I had to disable the Windows 'Human Interface Device Access' service (hidserv). Because the remote pairs as a HID device, there are some buttons that Windows was interpreting automatically. Like the volume and menu buttons. If you want volume to control your receiver, then you need to disable the service to prevent Windows from adjusting its own volume. But it's all very doable. I use the MR5U remote to power my enter system on (TV, receiver), change volume of my receiver, switch inputs on my receiver, and control Windows Media Center or PowerDVD when I have to switch away from the Nexus Player to watch live TV or play a physical disc that I haven't ripped into Plex yet. Just have to have the time and the determination to do it.
Click to expand...
Click to collapse
I'm determined! Haha. I'm going to be ditching cable TV for a few months so Kodi and ps4 will be my only devices. I'm following everything you've said and am very confident at this point. The last question I have is, how do you make the PC's IR emitter send the correct codes to the TV and receiver (on/off, volume, input)? Is there software I would need to learn/program the correct codes to blast? I'm mean there has to be right? Thanks!
Jaygatesny said:
I'm determined! Haha. I'm going to be ditching cable TV for a few months so Kodi and ps4 will be my only devices. I'm following everything you've said and am very confident at this point. The last question I have is, how do you make the PC's IR emitter send the correct codes to the TV and receiver (on/off, volume, input)? Is there software I would need to learn/program the correct codes to blast? I'm mean there has to be right? Thanks!
Click to expand...
Click to collapse
There are a couple of ways to accomplish this--assuming you are using EventGhost. The most fool-proof way is if you can find the Pronto remote HEX codes for the device(s) you want to control (the Files section of remotecentral.com is your friend). EventGhost has the ability to enter these codes for emitting IR. Otherwise, depending on the IR receiver/transmitter you buy, the IR plugin for EventGhost will allow you to "learn" a code from a remote. I've found this route to be a bit trial-and-error, though. As there are things that can affect the accuracy of the capture, like distance, the time you hold the remote button down for, etc. If you use this method, expect your workflow to be capture/test until you actually get the captured waveform to control your device.
ninja_rancher said:
There are a couple of ways to accomplish this--assuming you are using EventGhost. The most fool-proof way is if you can find the Pronto remote HEX codes for the device(s) you want to control (the Files section of remotecentral.com is your friend). EventGhost has the ability to enter these codes for emitting IR. Otherwise, depending on the IR receiver/transmitter you buy, the IR plugin for EventGhost will allow you to "learn" a code from a remote. I've found this route to be a bit trial-and-error, though. As there are things that can affect the accuracy of the capture, like distance, the time you hold the remote button down for, etc. If you use this method, expect your workflow to be capture/test until you actually get the captured waveform to control your device.
Click to expand...
Click to collapse
You have been an extraordinary help. I think I'm ready to start ordering what I need and getting my hands dirty. One last thing. Does the IR emitter you have come with software or just drivers? The only gap in my fully understanding this is how to tell Event Ghost to tell this emitter what codes to push once I have them? Thanks again, and I will report back with any info I encounter that could help others.
Jaygatesny said:
You have been an extraordinary help. I think I'm ready to start ordering what I need and getting my hands dirty. One last thing. Does the IR emitter you have come with software or just drivers? The only gap in my fully understanding this is how to tell Event Ghost to tell this emitter what codes to push once I have them? Thanks again, and I will report back with any info I encounter that could help others.
Click to expand...
Click to collapse
There are no drivers or software for the IR receiver/emitter. Windows is able to recognize it directly. From EventGhost, you will use the 'Microsoft MCE Remote - Vista/Win7' plugin (plus a service that it installs) in order for EventGhost to generate events on incoming IR and to send out IR (either from Pronto HEX codes or via capture). To use the MR5U/MR7U, you will use the 'Generic HID' plugin to perform actions on the button press events. The list of EventGhost plugins can be found here: http://eventghost.org/docs/pluginlist.html (some have links to individual documentation posts). So neither the IR receiver/emitter nor the Bluetooth dongle needed any extra drivers...they just worked out of the box.
ninja_rancher said:
There are no drivers or software for the IR receiver/emitter. Windows is able to recognize it directly. From EventGhost, you will use the 'Microsoft MCE Remote - Vista/Win7' plugin (plus a service that it installs) in order for EventGhost to generate events on incoming IR and to send out IR (either from Pronto HEX codes or via capture). To use the MR5U/MR7U, you will use the 'Generic HID' plugin to perform actions on the button press events. The list of EventGhost plugins can be found. (some have links to individual documentation posts). So neither the IR receiver/emitter nor the Bluetooth dongle needed any extra drivers...they just worked out of the box.
Click to expand...
Click to collapse
Understood. I watched some tutorials about event ghost and have a basic understanding now. Also won that gateway ir blaster just now. Just gotta order the bluetooth dongle tonight. Should be good to go soon! Will report back in a couple weeks. Thanks greatly!!
Has anyone found a Bluetooth remote (preferably with keyboard) but most importantly with a programmable IR blaster to control the other home theater equipment and a mic for voice control on Nexus Player?
I personally haven't tried with the nexus player yet but if anyone is willing to give it a shot, might i suggest this:
http://www.amazon.com/Rii-mini-i13-...TF8&qid=1447105809&sr=8-6&keywords=rii+remote
Had it for PC for awhile before I gave up on wireless air mouse (air mouse kinda sucks on a PC to me) and gave it to a friend, but I did try on my nexus 5 via usb OTG adapter and worked pretty well for what it was worth on the little screen. Heres what I remember about it:
the IR function allows you to program up to 8 devices via IR. to program you point the IR lights at eachother and hold down the corresponding button on the rii13 until the blue light flashes, then press the button you want the rii13 to learn on the other remote. This was nice and essentially allowed full customization of the IR side of the remote, but made programming take a little more time than finding a code and pressing it to match the device you want to program. Only real downsides i found to the IR side of the remote was the IR emitter was kind of weak. Depending on the device, you had to sometimes point either real close or aim just right to get the remote to work. Devices with good IR receivers werent much of an issue. For example, my Samsung tv was easy to aim and control, but my remote control tower fan was always tricky to point at, even directly aiming. the other downside was rapid Ir blasting was lacking. for example, my samsung tv i could press the volume down button rapidly or hold it down to make volume turn down quickly. on the rii13, input works, but was rather slow. there would always feel like a short pause between presses.
keyboard and mice work well on the rii13. keyboard side was pretty responsive, and mouse featured 3 different speed settings. downside was that whenever the mouse/keyboard function would be turned off, the speed setting reset back to default when turned on. The device also has microphone/speaker output. speaker wasnt that great, but worked. microphone wasnt awful but left a bit to be desired. it was as though there was feedback preventing the voice software on my pc to properly detect what i said. interestingly i dont recall this issue on my nexus 5, but then again i only played around with it on there, so dont have much experience. the mic does not have a push to talk button. I think its always on, as i recall simply saying "okay google" on my nexus 5 to activate it.
Now I know this all sounds awful, but i dont have much to compare it to other rii branded devices. for all i know, the other rii devices could have the same IR issues, etc. maybe i had a faulty unit. But I think it might be worth a shot to try and play with on the nexus player if anyone is curious or interested. Perhaps you dont care about the mic/speaker functions, in which case maybe the IR "issues" i had might not bother you that much.