Hello,
I loaded the WP7 yesterday and then wanted to go back to stock ROM today. While I am able to enter bootloader:
It says:
LEO1000 HX BC (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
Now when I run the stock ROM it starts the update and then stops at 1%.
I have tried both 3.14 and 1.66 ROM and in both it says, Error (244): Invalid model ID (This update utility cannot be used for your PDA. Please check your update utility.
Any solutions?
Flash android?
nicedude_abad said:
Hello,
I loaded the WP7 yesterday and then wanted to go back to stock ROM today. While I am able to enter bootloader:
It says:
LEO1000 HX BC (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
Now when I run the stock ROM it starts the update and then stops at 1%.
I have tried both 3.14 and 1.66 ROM and in both it says, Error (244): Invalid model ID (This update utility cannot be used for your PDA. Please check your update utility.
Any solutions?
Click to expand...
Click to collapse
It sounds like you have to run hspl and make it 2.08 hspl
There is a special thread here on How to get back to winmo from WP7, read it!
e:
Did you reformat the card to FAT32?
lms1407 said:
It sounds like you have to run hspl and make it 2.08 hspl
There is a special thread here on How to get back to winmo from WP7, read it!
e:
Did you reformat the card to FAT32?
Click to expand...
Click to collapse
milli260876 said:
Flash android?
Click to expand...
Click to collapse
When I run HSLP 2 or 3 it keeps on saying Critical error - bad model ID.
I will try flashing android and see if that works. I haven't come across the thread you are mentioning but have come across the Android flash thread where they explain in the details other issues but nothing relating to this HSPL critical error Bad model ID.
BTW, I even tried flashing from SD Card but the the bootloader sayd 'SD NONE'. Did format the card to FAT32
nicedude_abad said:
Hello,
I loaded the WP7 yesterday and then wanted to go back to stock ROM today. While I am able to enter bootloader:
It says:
LEO1000 HX BC (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
Now when I run the stock ROM it starts the update and then stops at 1%.
I have tried both 3.14 and 1.66 ROM and in both it says, Error (244): Invalid model ID (This update utility cannot be used for your PDA. Please check your update utility.
Any solutions?
Click to expand...
Click to collapse
Where did you get the download from? It seems to have completely altered your model id in bootloader. You should either have PB81100, PB81110 or PB81120. To my knowledge those are the only model id's that hspl will work on. This is a very old thread I started which allowed hspl to run and bypass the device id check. You may want to try the steps there to see if they help. You will need to modify the steps slightly - in step 2 instead of entering "PB81110" enter "LEO1000". Please note this carries no guarantees and is at your own risk.
ClydeB1 said:
Where did you get the download from? It seems to have completely altered your model id in bootloader. You should either have PB81100, PB81110 or PB81120. To my knowledge those are the only model id's that hspl will work on. This is a very old thread I started which allowed hspl to run and bypass the device id check. You may want to try the steps there to see if they help. You will need to modify the steps slightly - in step 2 instead of entering "PB81110" enter "LEO1000". Please note this carries no guarantees and is at your own risk.
Click to expand...
Click to collapse
Downloaded it from the forum itself. I tried to do what you suggested but now it's giving me an error ''Bad SPL version''.
Any solutions?
nicedude_abad said:
Downloaded it from the forum itself. I tried to do what you suggested but now it's giving me an error ''Bad SPL version''.
Any solutions?
Click to expand...
Click to collapse
Seriously, where did you get your download from, that must have seriously screwed with your phone to change your model id and spl version like that. I installed WP7 yesterday and have just safely reverted back to Android without any hassles. Do you recall what values you had before the flash?
If there is a solution it ain't gonna be a simple one and will need some serious tech help, which is outside of my levels. Even Googling the spl version only returns this thread.
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
splinters69 said:
This (or something similar) happened to me. I powered down my phone but did not take out the battery and it restarted the part that loads the win 7 rom while I still got the screen with the coloured bands on.
Try, taking out the battery for 10 seconds or so then put it in while holding the volume down key and powering up.
Got stock ROM back in first time but kiss goodbye to the data on your SD card. I had to use a Canon camera to reformat the card to get back the 14GB it was hiding.
Click to expand...
Click to collapse
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
nicedude_abad said:
This WORKED. Thanks a TON splinters69.
For future uses, this is what I did.
1. Took out the battery for about 30 seconds.
2. Put one of the LEOIMG.NBH on storage card
3. After putting the battery held the volume down button and pressed power button.
4. It went into HSPL mode straight away and started loading the win 6.5 OS.
You saved the day Splinters69. Thanks to Clydeb1 too for that modelIDcheckbypass.
Click to expand...
Click to collapse
Phew, that must have been a scare. Glad to see you got it resolved and something so simple as removing the battery - nice one @splinter69.
ClydeB1 said:
Phew, that must have been a scare. Glad to see you got it resolved and something so simple as removing the battery - nice one @splinter69.
Click to expand...
Click to collapse
Yea. It was scary but the only good thing was that I was able to get into MAGDLR so I knew that probably I could install another NAND Android ROM onto it. However, what I wanted was to go back to WinMO 6.5 and then re-learn.
Amazing what knowledge pool we have here, isn't it?
scary that. I think we all fear that at one point or another. thanks for the insight as to how u sorted it.when u said u put a rom back on was it a stock or custom rom.
It was a custom NRGZ ROM.
Sent from my HTC Desire using XDA App
cheers for that
Hi all !
I Had the exact same problem after installing WP7 and trying to go back to 6.5 :
Boot Screen was displaying :
LEO1000 HX BC (2K)
NSPL0.96.2250.0
MicroP (LED) 0x05
MicroP (TOUCH) NA
Whenever i try to flash back to any stock / signed ROM it failed at 1%
splinters69 technic is working perfect .
1> Switch Off you phone
2> Remove Battery & wait for 30secs
3> Hold Vol Down + Place Battery back in + Press Power Btn
4> BootScreen Should display your previous version of HSPL.
5> Dont need GoldenCArd , just use RUU FLASH MODE
Thx guys !
I installed MagLDR 1.12 and WP7... after restarting the phone, it kept reseting after about 15 seconds of DFT screen, so i couldn't flash another rom.
After that i took out the baterry and flashed a 6.5 rom and then flashed MagLDR 1.13 and WP7. This time it worked.
Thanks everybody, for posting such helpful things.
Hi all, tried the above mention steps but still couldn't flash it back to stock rom.
It always stuck at 0%, anyone can help?
Is flashing back to WinMo from WP7 the same as from NAND android?
Related
I have a problem:
I flashed my hd2 from a stocked rom 1.42 dutch version, with hspl 1.42. I installed a custom rom from: HTC HD2 Laurentius WWE 21891UltimatePOWER.
it worked fine for 2 or 3 days and then it stocked, i reseted the phone and
When i turn on my HD2, i get a white screen. and it doest go away. Even after softreset (volume button down in bootloader)
When i go in to bootloader i see this screen:
Pb81100 hx-bc
Spl-1.42.hspl xe
0x05
Cotullahspl 0x30
Click to expand...
Click to collapse
When i try to instal a rom by going in to bootloader en then start in win xp the update wont start, it stocked at 0 %
Then i tried to flash a orginal romt by sd:
it stocked at 7 % and i get this screen:
_______________________RUUNBH
PB81100___HX-BC
SPL-1.42.__hspl___XD
________________0x05
CotullaHSPL______0x30
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
- Then i tried to flash a radio rom by activesync, in xp it wont start,
- i tried flashing by sd and it stocked on 98%
- I tried different to install a rom and radio rom by vista, but also no succes
- I tried task 29 (by the Attached Task29 into a single exe.) to erease all data from the phone, but in windows by activesync it wont start
i tried al the above from windows 7.
Is there anyone that can help me, please i getting very desperate.
VERY VERY IMPORTANT! Try and read 2-3 times what is written here http://forum.xda-developers.com/showthread.php?t=609477
Only afterwards proceed to the following :
First of all....try and use Windows Vista or Windows 7.
Second of all....do not try to use task 29 because its a bit more complicated and it involves some drivers and so on!
Use this little thing here http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19 and after its completed....flash a proper radio something like 2.08.50.xx which you can find on Radio dedicated section here http://forum.xda-developers.com/showthread.php?t=611787
After all these....flash a custom ROM but be careful to be one suited with your radio! Which is a radio appliable for most of custom ROMS BUT be VERY careful!
Another thing.....do not flash from SD Card....Use the CustomRUU tool and flash it via ActiveSync!
Do you get any particular error message? When in bootloader mode, does "usb" show at the bttom of the screen? If so, try moving to a different usb port, preferably at the rear of the pc, or try different cable or even different pc. If still no luck, try uninstalling and then re-installing the latest version of Activesync.
The White Screen issue sounds like the incorrect radio version for the rom. I'm not familar with the details of the particular rom, but there are certain rom/radio combinations that will do that if they do not match eg running a 2.10 based rom with a x.xx.51.xx radio. The phone works intially until a reset and then hangs.
viperd said:
VERY VERY IMPORTANT! Try and read 2-3 times what is written here ......
Click to expand...
Click to collapse
Thanks for the replay
I tried, flashing by activesync. i flashed it the first time by hspl (the tread you link to) and then by activesync. But like i said, the hd2 stops at a white screen, so i tried by every possible way i could think of. Also i tried task 39 by the tool you mention, but it still does not work.
But i will correct my ts.
@clydeb1
I tryd to flash different radioroms, but if it try by activesync it wont start and by sd-flash it stocks at 98%, but i will try a different active sync
Okay,
I tried the following options:
- I installed a newest activesync and tried to instal an new rom under windows xp. The update stocked at 0% and i tried to install radio rom, with the same results
- I installed the windows mobile on windows 7, and tried the same as in windows xp, and still the same results.
Then i tried flashing every rom from the site by the sd-method (after every bad flash i formatted the sd-card with fat32)
With the sd method the phone stocked at 99% and then gives the next images:
00018003
LEOIMG.nbh - Fail
Radio_V2Fail
Update terminate
update fail
Click to expand...
Click to collapse
IS there any one how has a solution for this problem
Ok....try from the beginning!
1.Get from here http://forum.xda-developers.com/showthread.php?t=611433 HSPL2_RUN.zip (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....http://forum.xda-developers.com/show...3&postcount=19
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
viperd said:
Ok....try from the beginning!
1.Get from here (extract the content in a folder named hspl ).2
2. For Windows 7 you need Windows Mobile Device Center ( WMDC ) NOT ActiveSync!! Get it here
3. Make sure in WMDC settings the USB connection is checked!
4. Take out your battery....insert it again! Start your phone while keeping pressed the Vol Down button! This will get you into bootloader! The screen should display USB on the lower part of the screen! (evidently connected to computer )
5. Flash HSPL2 select 2.08 version
6. Use that tool I recommended earlier.....
7. Enter again the bootloader and flash a Radio ROM ( try 2.08.50.xx ) via WMDC!
8. Flash either NRGZ 21898 or Cleanex 21898 versions ( I recommend these in particular because they work with the radio mentioned above and are also stable ROMs ).
P.S. Take out your SD card and SIM card while performing all these steps!
Hope you will solve it!
Click to expand...
Click to collapse
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Give the phone to someone who can get it to work??
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
korenbloem said:
Thanks for the advise
I did every step. The first problem is: WMDC doest say there is a connection, while windows 7 say there is a connection also i see usb in the lower part of the screen.
In the same sequence as you right above. the hspl2 says it worked fine, but when i reset the boatlooder still says it has hspl 1.42 in stead of 2.08. The tool you recommended did't start. and says update error.
do you know something else i could do (or anyone else)
Click to expand...
Click to collapse
Thanks mate, if my suggestion doesn't work hopefully you can help him.
xmoo said:
Give me your SD-CARD serial number.
I'ma make a goldcard for you.
sd-card max to 4gb!
And then try flashing stock nld 1.66 rom using sd-card.
Click to expand...
Click to collapse
@Korenbloem,
A simple hardreset would have fixed your issue as well.
Instead of all kind of panic experiments like mtty/ flashing radios/roms from sd you could have come to me and I would have helped you.
You flashed a very old rom from the rom archive but never the less that rom is intensivily tested by me and the beta team.
I have no idea what kind of software you installed/tweaks you did or anything else but also with installing the wrong software it could cause the rom not to boot anymore.
Sorry to tell you but these 'bricking' stories are mostly caused by unexperiened users and it
making me sad to see more people are opening threads like this blaming a rom and causing a panic reaction in public destroying our work.
I realy hope you fix your device and I will try to help you but this isn't a rom issue.
Leo
Laurentius26 said:
Because you tried to fix it flashing a 'original rom?' from sd I think I know what's your problem.
Did you use a Dutch shipped rom while trying to fix or a WWE one?
If you flash a shipped rom from storage card it restores the original SPL and removes HSPL !
Try flashing a Dutch shipped rom one more time from storage card, it will restore the original SPL made for your device.
Click to expand...
Click to collapse
Thanks for the adivse, but i already tried that with an orginal rom, but i will try it again, mabey there is a difference with a shipped rom.
The first thing i did was a hard reset, but that did't worked. (the phone is in this shape for 1 month now).
Second. I am not blaming you or anyone. I flashed the wrong radio rom i think (cant remember witch one) And that is my own fault. I never wanna make the suggestion that it is because of youre rom.
I took a risk by flashing my phone. and i is my responsibility.
Edit: I tried a shipping rom nld. But it gives the same error as always, only after 7%. But thanks for the advise
@ Xmoo, First of al thank you that you want to help with a sollution. But what does that mean a goldcard and what are the consequences of using it.
Laurentius26 helped me with fixing my device.
The problem was the radio. and by flashing a factory rom from t-mobile, the hspl was reset to spl 2.00. After that he flashed a orginal shipped rom (the orignal one from my device). And the rom is fixed again SPL 1.66 is now on the device.
Laurentius thanks for al the help!!!!!
HD2 bricked?
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
vanbasten88 said:
Hi, I urgently need your help. I used my hd2 on a vodafone branded rom 1.44. Last week I installed a Vodafone NLD 1.72 rom , + froyostone 3.4 Rom,kernel 8.5 (with hspl). Yesterday my touchscreen has stopped fully .. . The next, I've been in touch with HTC and they will pick up my phone tomorrow for repair. I have to remove hspl ofcourse .. so I happily try to flash official vodafone rom from the SD card, did nothing 1.72, 1.48 seemed to do until I restart and got an ROM code error. What to do: ( I am pretty desperate now .. when you start you get an exclamation point and then 'not allow' and then the tricolor. Is this due to the lack of the original 1.44 ROM? Apologies for this begging post and my poor English but I hope that someone has a solution to unbrick this device so he can up picked by HTC.
Click to expand...
Click to collapse
Do you have a branded Leo? If so, enter bootloader (remove battery, press volume down, insert battery), connect via usb (maybe you have to wait for driver installation), start the latest *.exe from your operator/carrier...
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
andreftx said:
same problem here flashing an old radio... and now, everytime i try to flash a factory rom ship (RUU_Leo_HTC_PTG_1.66.410.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship) on 1% get the error 244 - invalid model id.
I tried to hard reset and now the message on the bottom of screen show me the right factory radio (2.06.51.07) of this rom but stays on this screen forever anyone knows what can i do? please help... tks a lot!
Click to expand...
Click to collapse
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
silverwind said:
Maybe it is because you flashed the wrong stock rom.
You should find the CORRECT STOCK ROM for your device, otherwise you need a gold card
Click to expand...
Click to collapse
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
andreftx said:
sorry but this rom i've downloaded from htc.com after insert model and my hd2 serial number and work for a while, but after flash hspl 1.42 to install another rom, when i flash a new radio version get the problem! so i flash again hspl to recovery for SPL 1.42.000 and then, nothing more is functional
tks 4 help... have anyone other solution?
Click to expand...
Click to collapse
The 1.66 ROM you posted above has radio version 2.06.51.07 with it. So have you considered trying to flash that radio version and then flash the ROM. I know if you get the ROM to flash it will flash that radio anyway. But you seem to think you flashed a wrong radio so just thinking out loud here.
Hello everyone,
i've been reading this forum for one month,
It was the day I decided to upgrade my HTC HD2, and someone disconnected the usb cable during the process.
Don't talk to me about that ;-)
The problem is I can't flash any rom radio into the phone.
OS ROMS work.
I read carefully a lot of posts here, I can say I have exactly the same problems as _Juster_ from this post :
forum.xda-developers.com/showthread.php?t=618084
My phone is a french HTC HD2, Orange branded.
I successfully installed HSPL 2.08
Making upgrades using USB is very difficult, it is very unstable (communication errors, no response from the phone....) .
I tried on windows 7 pro and win xp sp3 and it is the same.
I then created a goldcard, that I'm using to flash directly in the phone. It is stable, but when flashing a radio rom I always get the "ERROR 00018003, RSA FAIL error".
I learned from xda that the issue can be solved by flashing the original stock radio rom from Orange.
I downloaded a lot of shipped roms from Orange, or HTC.
Always RSA_FAIL.
I'm maybe doing something wrong, or this is a hardware problem....
a few questions for you folks :
1/ It seems that the original Orange stock rom is a 1.43
Must I have the 1.42 HSPL to flash it ?
Is the version of your HSPL important, when you want to flash a rom ? can I flash whatever rom with any HSPL ?
2/ using a Glodcard with HSPL already installed.
when you enter on the bootloader (vol down + power) you arrive on the HSPL tri color screen, displaying HSPL 2.08....
Are you sure the Goldcard is being used ?
How to be sure of that ?
I think (I may be wrong) when you enter the bootloader mode You are on HSPL mode.
What I do to enter the goldcard mode :
I just press power,
I have a "Software update failed message"
Then I arrive to the "Loading..." message
With the name of the ROM i'm trying to flash
LEOIMG.nbh
RADIO V2
Press power to start update
Am I right ?
Thanks for reading this and helping me.
is there other Tasks like task 29 you are aware of ?
Task 29 formats the phone ?
is there a way to partition the phone or to diagnose if there's a problem ?
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Robinmasters said:
what do we know about that RSA_FAIL ?
I assume the RSA proccessing is to check whether the RSA Key of the radio rom matches the phone's one ?
Is there a software way to bypass that RSA check ?
I've downloaded 22 radio roms (from orange and HTC) + several others (shipped & cooked)
I always get a RSA FAIL message when I try to flash.
any clue ? something ?
Click to expand...
Click to collapse
take a look at this thread, it might help
http://forum.xda-developers.com/showthread.php?t=621930
Thanks for the answers.
R3dox said:
Can't really make out if you tried it from your post, but you could try to flash back to stock by using the SD flash method. Just put the leoimg.nbh in the root of the SD and boot while holding the vol down button. That way you go back to stock spl, rom and radio.
Check the sticky in the ROM development section which refers to the whole HSPL and how to flash everything topic. That should fill you in on HSPL.
Click to expand...
Click to collapse
I already flashed 22 radio roms and a dozen of full roms (os + radio) using SD CARD.
As the usb is very unstable I'm using the sd card method to flash, which is also a goldcard.
the problem is I ALWAYS get the RSA FAIL message (error 00018003) at the end of the radio flashing process.
This guy : forum.xda-developers.com/showthread.php?t=618084
had the same problem but with un unbranded phone and had it solved by flashing a cooked rom he randomly choosed.
To understand the situation,
my phone is an Orange branded one, what is the difference between a branded and an unbranded phone, assuming they both have the same HSPL ?
thx
Just sold my HD2.
Seems like some questions don't have answers....
what was the problem? íf i understand you right, it even worked..but you couldnt flash another radio...
why dont you use it further?
DN41
The phone wasn't able to boot
It was stuck at the white HTC logo,
After the failure of a radio flash, I was not able to flash it again. (RSA FAIL)
I read all the posts about this problem in xda, tried everything, nothing worked.
sorry...
so who bought it? how much did you get?
someone who needed a new lcd or so?
DN41
150€ , it was in a very good condition
RSA FAIL
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
i've same problem, anybody know how to solve this problem?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
You don't just rename the whole update,you extract the ruu_signed.nbh file and rename that.
RSA FAIL
I had the same problem with my polaris (htc touch cruise - pola160). I managed to get rid of the problem by downgrading the radio rom.
I couldn't find my old one, but I was able to find the highest version older than my old one in the forum. So I first downgraded the radio using the sd card, after that the rom I was trying to install in the first place worked.
Thx to pcarvalho for this "fix" : http://forum.xda-developers.com/showpost.php?p=3645124&postcount=1 - the "Important Note:" section (always read the small print ).
Hope this helpes.
PS: Sorry if this is too late for some...
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
rudon100 said:
PROBLEM WHEN TRYING TO UNBRICK MY HD2 STUCK ON STICK TOGETHER SCREEN I GOT THE STOCK FIRMWARE FROM TMOBILE AND CHANGED NAME TO leoimg.nbh SAVE TO FORMATTED SD CARD FAT 32 AND TRY TO LOAD THIS IS THE ERROR DON'T KNOW HOW TO SAVE MY PHONE I HAVE A WINDOWS XP PC AT HOME
Click to expand...
Click to collapse
Fz.hary said:
i've same problem, anybody know how to solve this problem?
Click to expand...
Click to collapse
jasonlee90210 said:
having this exact same problem, radio rsa fail, can't even flash a stock rom.
did anyone solve this?
Click to expand...
Click to collapse
Put the back of the phone in front of an AC in cold for 5 minutes, and keeping it always in front of the AC try to install.
If you are able to do that, send it back to the warranty.
Hello,
I have the same problem!
long time ago I had HTC devices, but few days ago I bought HD2 and it was installed android. Is unable to start or when they try to load a ROM eror occurs.
phone has only a white scrin.
error occurs mostly when upgrade Radio ver. I somehow managed NRGZ image but again not boot system.
Task 29 also comes to 19% and stops with the error.
I have a feeling that the real problem is the radio version. (00,018,003 Radio Fail)
I do not know what is the original ROM.
IMEI: 3526 6604 8712 295
SPL 2.08.HSPL
any help came good
Hello,
I'm about six hours into the process of trying to revive a nonfunctional HD2 that I purchased. I'm going batty!
Here is my status:
1) have installed SPL-2.08.HSPL 8G XE (0x05, 0x40) Cotulla HSPL
2) Have downloaded a few different roms (Chucky, TMO official, Energy) but they either get stuck at 0% or 9% (the highest it's gotten)
I'm getting pretty good at pulling the battery - it's like a new skill I never hoped to have!
I'm getting pretty frustrated because I've read about a hundred different posts on this site and I see that people are getting around this, but I'm starting to wonder if my phone has an issue that I can't resolve?
The phone doesn't boot up at all - it just says "Upgrade ROM code error, Please try again". Prior to my goofing with it, it just got stuck at the "Stick Together" screen. (Unwittingly bought it that way)
If I use the HSPL3_PKG to install/remove HSPL, it only works (connects to the phone) about one out of ten times, and out of the ~ten times I have gotten it to work, it only completed twice with a "We Hacked It" screen. The rest of the time it errors out just as I think it's getting the job done.
If I boot to the bootloader screen, I can put the USB cable in and see it change from Serial to USB (I've tried the thick and thin cables as some have suggested and haven't noticd a difference yet)
Then I kick of a rom update using the update utility that comes packed with it, and either the update process stops at 0% or it has made it all the way to 9%.
I'm in a position to get a replacement from TMO via the person who bought it (two for one, wife didn't like it, I bought it off of him) but I would rather not.
Any suggestions?
The part number of the phone is 99HKY001-00 B
jimmyswinger said:
Hello,
I'm about six hours into the process of trying to revive a nonfunctional HD2 that I purchased. I'm going batty!
Here is my status:
1) have installed SPL-2.08.HSPL 8G XE (0x05, 0x40) Cotulla HSPL
2) Have downloaded a few different roms (Chucky, TMO official, Energy) but they either get stuck at 0% or 9% (the highest it's gotten)
I'm getting pretty good at pulling the battery - it's like a new skill I never hoped to have!
I'm getting pretty frustrated because I've read about a hundred different posts on this site and I see that people are getting around this, but I'm starting to wonder if my phone has an issue that I can't resolve?
The phone doesn't boot up at all - it just says "Upgrade ROM code error, Please try again". Prior to my goofing with it, it just got stuck at the "Stick Together" screen. (Unwittingly bought it that way)
If I use the HSPL3_PKG to install/remove HSPL, it only works (connects to the phone) about one out of ten times, and out of the ~ten times I have gotten it to work, it only completed twice with a "We Hacked It" screen. The rest of the time it errors out just as I think it's getting the job done.
If I boot to the bootloader screen, I can put the USB cable in and see it change from Serial to USB (I've tried the thick and thin cables as some have suggested and haven't noticd a difference yet)
Then I kick of a rom update using the update utility that comes packed with it, and either the update process stops at 0% or it has made it all the way to 9%.
I'm in a position to get a replacement from TMO via the person who bought it (two for one, wife didn't like it, I bought it off of him) but I would rather not.
Any suggestions?
The part number of the phone is 99HKY001-00 B
Click to expand...
Click to collapse
After HSPL Install RADIO 2.14.50_04 then TRY to install latest Energy ROM.. Should work.
netvpn7 said:
After HSPL Install RADIO 2.14.50_04 then TRY to install latest Energy ROM.. Should work.
Click to expand...
Click to collapse
Even if it us a TMOUS HD2? I will give it a try, but I want to be sure before doing it!
Thanks for the reply
netvpn7 said:
After HSPL Install RADIO 2.14.50_04 then TRY to install latest Energy ROM.. Should work.
Click to expand...
Click to collapse
Once you have Hard-SPL on the device you don't need to worry about that anymore. Flashing Roms and radios will not overwrite it, that's what makes it "Hard". To make sure it's on there go into bootloader and it should show 2.08.hspl.
As for the radio, for TMOUS, just make sure it's a x.xx.50.xx radio (not a .51) and you'll be fine. If you have radio 2.10.50.xx you shouldn't have to change it.
So now I would try downloading one of the stock shipped Tmo ROMs (2.13 or 2.14). Then remove Sim and SD and go into bootloader, connect USB to PC and make sure it says USB on the device (not serial) and run the ROM Update Utility (RUU.exe). See if that works.
i also got this problem ,will try ur method n c
after hspl ,cant flash finish radio 2.14 it says ERROR (290) INVALID COMMAND.
excelpass said:
after hspl ,cant flash finish radio 2.14 it says ERROR (290) INVALID COMMAND.
Click to expand...
Click to collapse
You need HSPL..
HSPL done ,i tried a lot of files only Miri & Dinik n Duttys Leo Sense file can b flash successfully ,it went into menu once but now hang at htc startup again,,is this hardware problem?
i had the same problem last week. Drove me nuts.
i found there are more than one version of HPSL 3.
you have to download the latest one. for more info,
read my posts at
http://forum.xda-developers.com/showthread.php?t=789506&page=18
So you need HardSPL3 (the version is DarkForces Team HardSPL3 by bepe and Cotulla 21.06.2010)
If it still doesnt work, take a photo and post your screen
Still no go...
I have installed SPL-2.08.HSPL 8G XE (0x05, 0x40) Cotulla HSPL, the latest version I could find.
I just tried to flash RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship and it consistently flakes out at 8%.
I charged the phone all night, booted to the tricolor screen, kicked off the update as an administrator in Win7, the phone got to 8% and then the update flaked out on the PC - "The ROM update encountered communication errors during the update process" (Error [276])
I genuinely think that this phone is bunk - I'm just going to have the fellow I bought it from call in for a warranty replacement.
Thanks for your help, everyone...
SD card flash...
Hi,
I could not see it anywhere in this thread, and also I'm not certain if it is possible on a HD2. But on my xperia I'm usualy flashing from a SD card, copy the image over rename it as KOVSIMG.NBH (guess it would be something like LEOROM.NBH).
Than by pressing (and holding) volume down + power button while the device is off going to the boatloader screen which detects the card (must be inserted and flash from it IF there is the correct file loaded on the card.
Dude,
Did you actually download the HardSPL3 version from DarkForces Team?
If not, dont second guess anything. And if it works, you'll get your phone back.
The file name to download is "HSPL3_PKG.exe". Its by bepe and Cotulla 21.06.2010
If you downloaded the right version. it will support ALL LEO types, and all the SPL versions below:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
you just select which SPL version to install in the Choose SPL screen. This version also disables the CID Check.
Dont knock it before you try it ..
+1
jimmyswinger said:
I have installed SPL-2.08.HSPL 8G XE (0x05, 0x40) Cotulla HSPL, the latest version I could find.
I just tried to flash RUU_Leo_1_5_TMOUS_3.14.531.0_Radio_15.42.50.09U_2.14.50.04_LEO_1.5_Ship and it consistently flakes out at 8%.
I charged the phone all night, booted to the tricolor screen, kicked off the update as an administrator in Win7, the phone got to 8% and then the update flaked out on the PC - "The ROM update encountered communication errors during the update process" (Error [276])
I genuinely think that this phone is bunk - I'm just going to have the fellow I bought it from call in for a warranty replacement.
Thanks for your help, everyone...
Click to expand...
Click to collapse
Exactly in the same situation and dont know what to do...
snooffy said:
Hi,
I could not see it anywhere in this thread, and also I'm not certain if it is possible on a HD2. But on my xperia I'm usualy flashing from a SD card, copy the image over rename it as KOVSIMG.NBH (guess it would be something like LEOROM.NBH).
Than by pressing (and holding) volume down + power button while the device is off going to the boatloader screen which detects the card (must be inserted and flash from it IF there is the correct file loaded on the card.
Click to expand...
Click to collapse
Yes you are correct you can flash via SD card. You need a 4GB or lower SD card. This is not to say other higher GB SD card will not work, it is just that it has been stated many times the higher SD cards sometimes work to flash a ROM and sometimes don't. The card needs to be formatted with Fat 32. You have to find the RUU_(wharever).nbh and rename it to leoimg.nbh ( you almost got it righ tsnoffy lol) and copy it to your SD card. insert SD card into phone and hold the volume down botton down anx tap the power button keep holding the volume down button down until you see bootloader come up and say searching then let go of the volume down button. The ROM will flash.
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
did you do anything to your device ?
i'm asking because i have the same problem and didn't do anything at that time, i had a few freezes which forced me to remove the battery and now its stuck on the white screen, i can't flash anything either. I wasn't trying to either before this happened to me, i had winmo 6.5.x running for months, pretty much untouched since i only use android now.
.) i did a hard reset, which went really fast and did nothing.
.) tried hspl 3 ( it says succesfully flashed, but when i load the bootloader the previous version is being displayed there.
.) tried to flash:
-stock rom from sd, i get stuck in the bootloader "serial"
basicly it just does nothing...
i used a 2gb mirco sd card for that, formatted in fat32. stock rom extracted and renamed the RUU_signed.nbh to leoimg.nbh. volume down + reset
-stock rom from pc/usb connection, error/timeout at 0% saying connection problems.
im running out of idea's, i got 1 month warranty left, but im afraid that it will do me no good since i used hspl
You need to update your spl to 2.08.hardspl AND you mostlikely need to flash your radio as well.
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
arminneman said:
I found out that i made a mistake while trying to flash from sd, i didn't put the leoimg at the root of the sd so it didn't get detected. I managed to get rid of the white screen after flashing but its nowhere near functional. It also gave me an error during the flash, but it carried on and finished the flash eventually...
Now when i boot winmo it says something about microp mismatch, i tried two different roms to make sure it had nothing to do with the rom i was using, it didn't... i had the same problem with both. So my guess is that something is damaged, at least hspl is gone now so i can make use of my warranty again, for the people that don't have warranty left i hope somebody comes up with a solution, if there is one, everything points to hardware damage from my point of view. Would be interesting to know how your problem developed...! anyway good luck
Click to expand...
Click to collapse
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
kabir.581 said:
could u explain the procedure how to update spl to 2.08.hardspl
and flash radio...
actually i'm new with pocket pc softwares...
Click to expand...
Click to collapse
Yeah sure i can do that, but before i do you need to tell me how you got that white screen in the first place. If it's not because of a failed flash attempt you probably want to keep your phone as it is now, so you can make use of your warranty... hspl makes that impossible!
It's probably a hardware problem, i looked up on that microp mismatch and it looks like a hardware failure, updating your software isn't going to solve that, it might solve the white screen issue, but the phone itself won't be functional. Try to explain what happened so i can give you proper instructions on what to do.
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
kabir.581 said:
guys as i have posted in my last post
that was a condition i have received from costumer.
i guess he tried to update it...
Click to expand...
Click to collapse
With the phone off, press and hold the Volume Down button and then tap the Power button.
You will get a multicoloured screen with the word 'Serial' at the bottom. What else does the screen display?
What country and phone operator is the phone locked to?
if you want to install a custom rom or eventually android you are going to need hspl, there are enough guides and tutorials on how to do that on this forum, search for it.
if you just want to bring the phone back to life, running windows mobile, you can go to the htc website. Go to the support section and select your phone and look for available rom updates for your phone/serial number.
connect your phone to the pc and follow the instructions of the setup and upgrade... if the phone doesn't get detected, extract ruu_signed.nbn from the setup file and rename it to leoimg.nbn
put that at the root of your sd card formatted in fat32 and boot your phone holding down the volume down button. Follow the instructions, when its done you can reboot the phone and hopefully you can make use of it
berbecverde said:
If you can start your phone and enter the bootloader there is no need to sent to service.
Enter bootloader and flash from there HSPL 2.08, and flash radio too.
After that flash MAGLDR and android rom.
Click to expand...
Click to collapse
Not really, i was able to do that and even flash an upgrade on the phone, but not without errors, the phone didn't function properly after the flash, so its very likely that something is damaged in my case. I send my phone to htc so they can repair it.
it displays the info
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
Flash a stock rom... in usb mode..
Sent from my HTC HD2 using XDA App
hey guys i tried to download rom from htc support area
but it asked me to enter serial num when i entered the
device serial it gives error.
The serial number you’ve provided appears to be invalid. Please try again.
could any plz tell me the exact procedure and the links to download
what ever it requires its just because i'm new with this softwares
here the info which i got from bootloader mode is:
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
If you want to install a stock rom you should know what kind of WM has your HD2.
You may not be able to flash any stock rom.There are a lot of versions, regions and it may take some time to try all of them.(http://shipped-roms.com/index.php?category=windows mobile&model=Leo)
If you do not know the version, as you say you have SPL 1.42.
If this is true you can change to HSPL and after that flash any rom you want, and android.
This should solve your problems.
So download the HSPL from the second post. (http://forum.xda-developers.com/showthread.php?t=611433)
Enter bootloader connect the USB cable and flash HSPL.Select 2.08 HSPL from the list.
If you succeed. If you check the bootloader you should see something like Cotulla HSPL 2-08.
Now you can flash any rom you want, the same way: download a rom of your choice, enter bootloader, connect usb cable and start the RUU utility.
If you want to flash android you have to upgrade the radio version.(the same way)
Flash MAGLDR.(the same way).
Flash android.(this is different).
If i am wrong, anybody feel free to correct me.
I would say also do a task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/atta...0&d=1268260144
dude it works thanks alot
and thanks to every one who has tried to help me
rgds 4m kabir.
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
transitconnect said:
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
Click to expand...
Click to collapse
yes, it's possible... i've deone it about a month ago... i simply put HD2 on tri-colour screen and connected to pc... after it said USB instead of SERIAL i launched the last stock RUU.exe (downloaded from htc site) from pc and the RUU flashed stock WM 6.5 on HD2... everything worked like a charm
lukes91 said:
yes, it's possible... i've deone it about a month ago... i simply put HD2 on tri-colour screen and connected to pc... after it said USB instead of SERIAL i launched the last stock RUU.exe (downloaded from htc site) from pc and the RUU flashed stock WM 6.5 on HD2... everything worked like a charm
Click to expand...
Click to collapse
is it t-mobile? if its t-mobile try to download this http://www.shipped-roms.com/downloa...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
transitconnect said:
Despite my best (inexperienced) efforts to get my original windows phone back, I have failed.
A while back I stumbled through converting my phone to Android from Windows 6.5, this is the exact details on my phone currently...
Android Version 2.3.2
Baseband 15.42.50.11U_2.15.50.14
Kernel Version [email protected]#26
Build Number Gingerbread HD2 v2.1
I would be ever so grateful if somebody could 1 tell me if it possible to go back to original phone, and 2, how I can go about doing that as i seem to be coming up against walls with what I try, as I said i'm not the best with software.
Many thanks to anyone with the time to advise me.
Click to expand...
Click to collapse
We'll sometimes it's a combination of bad luck, what you can do is to check the battery points in the phone, sometimes they are bend so they don't make a connection, then I suggegst to power your phone to the battery charger and hold down the volume button that should bring you into bootloader, you can also do this with a sd-card with the original rom on it, then it's not necesarry to charge your phone for 50%, you have to rename the RUU_signed.nbh file into leoimg.nbh and copy that file to your sd-card, then it will ask you directly to update the phone.
Succes
Back to stock
Rataplan said:
We'll sometimes it's a combination of bad luck, what you can do is to check the battery points in the phone, sometimes they are bend so they don't make a connection, then I suggegst to power your phone to the battery charger and hold down the volume button that should bring you into bootloader, you can also do this with a sd-card with the original rom on it, then it's not necesarry to charge your phone for 50%, you have to rename the RUU_signed.nbh file into leoimg.nbh and copy that file to your sd-card, then it will ask you directly to update the phone.
Succes
Click to expand...
Click to collapse
Well i did exactly that, Not only that, tied installing using the RUU which has been downloaded from HTC site...
using the RUU it give me the error ERROR [262] which is
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
While installing from SD card
On the RED GREEN BLUE Screen is
PB8110 HK-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Upgrade ROM code error Please Try again
then when it goes to the white screen says Loading...
and it stays like that... anybody has any suggestion for me or did i just brick my phone while trying to get it back to Stock ROM
Try another rom, probably the rom is corrupt.
Succes,
Downloading 9 different ROMS at last found the right one which did flash properly. Thanks for the help.
You must remember when flash via SD you loose the HSPL as first stage of SD flash installs standard spl so loose the CID bypass you had with the HSPL.
Always best try & flash from PC as you have CID bypass & retaining the HSPL is safer & any generic HTC ROM can be used (TMOUS>usa t-mobile should use original WM rom - see htc wiki)