Hi All,
I have been using this for a long time now. It was originally in another thread, but it does not get much attention now.
I hear many people complaining about their TG01 screen not senstitve.
The following file increases your screen sensitivity of your TG01 to max.
1) Install Attached .cab / Reg Tweak
2) Soft Reset
3) Be Amazed at your Screen Sensitivity!
This is a little .cab file / reg tweak created by kevinpwhite for the TG01 (all credits to him)
Please give me feedback if it works for you!
Also if you like it please feel free to Thank Me! (Thanks Button!)
Other WM's
P.S - I'm also Assuming It Could Work on your other devices!
You can test and report!
Cooks
Feel Free to cook this in your future ROMs, so the screen sensitivity is to the max!
olyloh6696 said:
Hi All,
I have been using this for a long time now. It was originally in another thread, but it does not get much attention now.
I hear many people complaining about their TG01 screen not senstitve.
The following file increases your screen sensitivity of your TG01 to max.
1) Install Attached .cab / Reg Tweak
2) Soft Reset
3) Be Amazed at your Screen Sensitivity!
This is a little .cab file / reg tweak created by kevinpwhite for the TG01 (all credits to him)
Please give me feedback if it works for you!
Also if you like it please feel free to Thank Me! (Thanks Button!)
Click to expand...
Click to collapse
thanks for sharing (Sorry, you are limited to five thanks per day )
I will hit the TNX BTN tomorrow
mirolg said:
thanks for sharing (Sorry, you are limited to five thanks per day )
I will hit the TNX BTN tomorrow
Click to expand...
Click to collapse
Thanks! I'll add it to your Winmo tips and trick thread too!!
olyloh6696 said:
Hi All,
I have been using this for a long time now. It was originally in another thread, but it does not get much attention now.
I hear many people complaining about their TG01 screen not senstitve.
The following file increases your screen sensitivity of your TG01 to max.
1) Install Attached .cab / Reg Tweak
2) Soft Reset
3) Be Amazed at your Screen Sensitivity!
This is a little .cab file / reg tweak created by kevinpwhite for the TG01 (all credits to him)
Please give me feedback if it works for you!
Also if you like it please feel free to Thank Me! (Thanks Button!)
Click to expand...
Click to collapse
@olyloh6696 ... Many thanks for flagging this one up
Just for clarification, all it contains is the relevant Registry settings following very careful and >> light << screen taps to carry out the standard calibration procedure (following the cross-hair targets round the screen).
Obviously done on one of my TGs - should work as a start point on any TG, but if you want to make your own custom version, simply save the same Reg entries (use something like CE Reg Editor to extract) and then cab up.
Can also be included along with all sorts of other personal, email and similar settings into a master setup cab which enables very easy personalisation when you update the ROM.
kevinpwhite said:
@olyloh6696 ... Many thanks for flagging this one up
Just for clarification, all it contains is the relevant Registry settings following very careful and >> light << screen taps to carry out the standard calibration procedure (following the cross-hair targets round the screen).
Obviously done on one of my TGs - should work as a start point on any TG, but if you want to make your own custom version, simply save the same Reg entries (use something like CE Reg Editor to extract) and then cab up.
Can also be included along with all sorts of other personal, email and similar settings into a master setup cab which enables very easy personalisation when you update the ROM.
Click to expand...
Click to collapse
Thank you, for creating the .cab Yes, cheers for the relevant infomation, i hope other XDA Members find it useful.
olyloh6696 said:
Thank you, for creating the .cab Yes, cheers for the relevant infomation, i hope other XDA Members find it useful.
Click to expand...
Click to collapse
now i have 5 tnx again one in post 2 is for youuuuu
wow, it´s funy! in all four categories- miROlg
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mirolg said:
now i have 5 tnx again one in post 2 is for youuuuu
wow, it´s funy! in all four categories- miROlg
Click to expand...
Click to collapse
Yay! thanks (you could also thank kevinpwhite too for the original tweak)
p.s-i was going to thank you on that, but now its my turn for thanks limit to be full! :/
mirolg said:
now i have 5 tnx again one in post 2 is for youuuuu
wow, it´s funy! in all four categories- miROlg
Click to expand...
Click to collapse
haha my most is 3/4 categories olyloh6696
olyloh6696 said:
Yay! thanks (you could also thank kevinpwhite too for the original tweak)
p.s-i was going to thank you on that, but now its my turn for thanks limit to be full! :/
Click to expand...
Click to collapse
i had tnx kevinpwhit, too! i´m a gentleman
.......... yes, but 4/4 is a special constellation
i don't think it made huge difference to my screen sensitivity, well not yet. I haven't done a soft reset. But can't do it now, I have issue with my voicemail as there is this 'ghost' voice mail that sits there everytime I soft reset my tg01 and it's annoying!
But I had shared my thanks for today between all 3 of you
Thanks for this, but it has not made any change at all for me.
Original UK orange 6.5 rom
[email protected] said:
Thanks for this, but it has not made any change at all for me.
Original UK orange 6.5 rom
Click to expand...
Click to collapse
hmm, i can confirm that it worked fine for all the RoMs ii have tried. Which one did you use mate? the .cab or the .reg tweak?
The screen sensitivity has defintely increased for me, but only by a small amount, don't expect you screen to feel like a capacitive, haha
Thanks for trying (and the thanks) by the way!
[email protected] said:
Thanks for this, but it has not made any change at all for me.
Original UK orange 6.5 rom
Click to expand...
Click to collapse
If you carried out your own screen registratioon very carefully (and gently) in the first place, then you may well not notice any meaningful difference - the original point of this was allowing one to load a new ROM and just tap through the screen setting stage without worrying about any accuracy or finesse and then running the .cab to apply 'proper' settings afterwards.
Best eay to carry this out is try typing on the screen before installing the .cab, then after installing the cab and see if it makes a significant difference!
Sent from my GT-P1000 using XDA App
olyloh6696 said:
Best eay to carry this out is try typing on the screen before installing the .cab, then after installing the cab and see if it makes a significant difference!
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
i think it makes not a significant difference, but tnx!
thanks for your sharing
thanks for your sharing
holy smokes 10x alot mate .. really great stuff
warcaller said:
holy smokes 10x alot mate .. really great stuff
Click to expand...
Click to collapse
Glad it works mate
great work good for me
Related
Moved to new thread sorry
Hello gullum
You finally made it just one question ,what do you mean by "TouchFlo is activated by CommManager button by default" do you mean you assigned Touchflo to CommManager Button ? or it's always activated by default...
anyway, I'm downloading it now and i will be testing it shortly.
Thanks man
Wow finally we got TouchFlo!
Wow finally we got TouchFlo!
But, could someone upload it here.
Facing problem with Rapidshare because of shared IP in my collage.
Anyway Thank You Gullum for the wonderful job!
thank you very much
i'm trying
hma4 said:
Hello gullum
You finally made it just one question ,what do you mean by "TouchFlo is activated by CommManager button by default" do you mean you assigned Touchflo to CommManager Button ? or it's always activated by default...
anyway, I'm downloading it now and i will be testing it shortly.
Thanks man
Click to expand...
Click to collapse
Yes it means that it asigned to the commenager buttum just tought that would be the best way of doing it.
Wow finally we got TouchFlo!
But, could someone upload it here.
Facing problem with Rapidshare because of shared IP in my collage.
Anyway Thank You Gullum for the wonderful job!
Click to expand...
Click to collapse
I'll upload to somewhere els too
gullum said:
Ditails and descussion forum
Step 1.
Use any of the step 1. from other roms
PDAVIET step 1
Fantastic Mobiz v2.0b4 step 1
NVID(no vendor) AKU2.2 I woulden't use this one. it instales an ugly splash screen
Prophet Touch gullum rom Step 2
TouchFlo is activated by CommManager buttom by default
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This would not have been possible without the help from Cloudyfa from PDAVIET
the extended rom must be instaled or some thing wan't work it is less then 100 KB and it instales the shortcuts and some regtweaks that are needed
Click to expand...
Click to collapse
Great, Gullum
Hi Gullum,
Great job! Thanks for your effort.
Just one question - Has orientation issue of camera 4.11 been solved in this ROM?
Cheers,
My initial FeedBack on this rom:
Hello,
1: The Touchflo soft key in today screen doesn't work.
2: the contact softkey in phone app doesn't work.
3: Loved the new Camera but: Everytime i tried to get 3M photo the phone stop responding and I have to soft reset. Also when I play with the camera mode, for example when i change the mode from "photo" to "contact photo" then "burst", then "mms video", the camera app will stop responding.
4: I don't like the fact that this rom doesn't have Speed Voice dial app.
5: In remove programs, when I click ok on right top of the screen nothing happens. Same with "Clear Type Tuner".
6: There has to be a way to disable the "Slide2Unluck Touch Skin" after a while it gets annoying.
7: I like the "contact manager" but it was better to leave it to the user to decide which contact manager is best.
8: It takes 5 sec to show the windows folder. In PDAVIET 4.0.0.0.5 this time is around apx. 3.5 sec.
Anyway, although I loved the HTC black theme but I will flash back to PDAVIET 4.0.0.0.5a Cross. It's faster and it's more robust..
Well once again thank you, I think the next version would be better
Keep up the good work,
mewwoo said:
Hi Gullum,
Great job! Thanks for your effort.
Just one question - Has orientation issue of camera 4.11 been solved in this ROM?
Cheers,
Click to expand...
Click to collapse
The camera orientation is the same
hma4 said:
Hello,
1: The Touchflo soft key in today screen doesn't work.
2: the contact softkey in phone app doesn't work.
3: Loved the new Camera but: Everytime i tried to get 3M photo the phone stop responding and I have to soft reset. Also when I play with the camera mode, for example when i change the mode from "photo" to "contact photo" then "burst", then "mms video", the camera app will stop responding.
4: I don't like the fact that this rom doesn't have Speed Voice dial app.
5: In remove programs, when I click ok on right top of the screen nothing happens. Same with "Clear Type Tuner".
6: There has to be a way to disable the "Slide2Unluck Touch Skin" after a while it gets annoying.
7: I like the "contact manager" but it was better to leave it to the user to decide which contact manager is best.
8: It takes 5 sec to show the windows folder. In PDAVIET 4.0.0.0.5 this time is around apx. 3.5 sec.
Anyway, although I loved the HTC black theme but I will flash back to PDAVIET 4.0.0.0.5a Cross. It's faster and it's more robust..
Well once again thank you, I think the next version would be better
Keep up the good work,
Click to expand...
Click to collapse
I will make inprovements in a next version. I have reached my first goal in getting all the touch software running on the prophet.
Now my next goal is to inprove this rom.
1: I know and thats my mistake. this can be changed in System Soft Key app
2. also my mistake can be canged with a regeditor.
3. It seems to have some problems for me now too I'll inprove that in next release. maybe I've used a driver for the Hermes rom.
4. Sorry but I had to cut of somewhere. the rom is backed to the max.
5. thats the new Touch.dll that is not realy acurate. you have to press ok or use the stylus to close programs
6. The slid2unluck can be deactivated by deleting iLock from \windows\startup folder
7. this can also be changed in the System Soft Key app. but not problem 2
8. thats a reason PDAVIET 4.0.0.0.5a Cross has no touchFlo and it's got 104 files Audio Manager is 194 files the camera is 57 files in PDAViet and my camera has 113. so thats why it takes longer to load
Anway thanks for your response
thanks for you effort, I did flashed but I need more stability. It's a good start, everything is very beautiful.
Can you teach me how to make the HOME PLUG-IN more like yours. I am using 4.0.0.05a and it's too colorful.
story said:
thanks for you effort, I did flashed but I need more stability. It's a good start, everything is very beautiful.
Can you teach me how to make the HOME PLUG-IN more like yours. I am using 4.0.0.05a and it's too colorful.
Click to expand...
Click to collapse
Yes exactly !! I really did love the black Home Plug-in Theme.
hma4 said:
Yes exactly !! I really did love the black Home Plug-in Theme.
Click to expand...
Click to collapse
goto
http://gullum.4shared.com/
there is a cab file with the black theme
Will installing this plug-in make the PV 4.0.0.0.5a slower b/c it's not part of ROM?
gullum said:
goto
http://gullum.4shared.com/
there is a cab file with the black theme
Click to expand...
Click to collapse
PDAVIET 4.0.0.0.5a has a Home plug in as you know.
Can i just install this one on top of the existing one ? cause I tried installing 3 button Home plug in , and i had to hard reset to get back on track. my phone was supper slow.
story said:
Will installing this plug-in make the PV 4.0.0.0.5a slower b/c it's not part of ROM?
Click to expand...
Click to collapse
yes I would gues so
what I can do is make a zip with the images and upload then you can you inport the images into windows folder
View attachment 44053
thanks gullum,
I'm flashing now.
However you have done the great job!!!
Cool man!
gullum said:
yes I would gues so
what I can do is make a zip with the images and upload then you can you inport the images into windows folder
Click to expand...
Click to collapse
That would be GREAAAAAAAAAAAT !!!! and tell us once we put the images in windows folder what registry we have to change .
hma4 said:
That would be GREAAAAAAAAAAAT !!!! and tell us once we put the images in windows folder what registry we have to change .
Click to expand...
Click to collapse
just replace the images and thats it a SR is needet I think though
gullum said:
yes I would gues so
what I can do is make a zip with the images and upload then you can you inport the images into windows folder
View attachment 44053
Click to expand...
Click to collapse
Awesome man !! I disabled my Home plug in, and copied the files into the windows folder and it worked. No need for SR Thanks a million times !!!
Merged Reversal 2.0 - Windows Mobile 6.1
ROM Version 5.2.19.213 WWE - R E V I V E D
Well, here it is: version 2. Actually, I did not really intend to bother once more with any cooked rom for the Prophet. But when I read lately that Windows Mobile 7 has been postponed until end of 2009, I thought of trying it again. For WM7 I suspect new hardware will be necessary, and I just do not want to buy a new device for only one year. So I decided to keep my Prophet a little bit longer and try to put a decent version of WM6.1 on it.
General Information:
This rom is based on Cloudyfa's latest contribution as you can tell by the version and has been merged and reversed back to the WM6.1 standard as closely as possible. I stripped off any additional software that is not "original". After some experimenting I also found that IR and "Receive all incoming beams" are not interlocked anymore as it used to be. So, no bug I hope, and actually quite handy. In terms of the keypad backlight: I found on an official HTC Touch Dual that the keypad backlight does not switch on either when pressing the power button. So I assume this is an "official" behaviour and not a bug either...(?)...
I was also thinking about implementing transcriber and VOIP. But as this rom might also be used by non-English speakers, I thought everyone should choose themselves. You can find the cabs all over the place or download the older but complete version 1.51 directly from Microsoft (English, German & French only). I also decided to leave VOIP out as I read too many different opinions on it in terms of functionality and stability.
Finally, I made two versions: one non-UC (with accessible and bootable Extended ROM) and one UC-capable. The latter one has also an accessible Extended ROM but will not boot from it. Find the download links below - Jump/Soft/Hard SPL required!
I have tested this rom heavily over the last couple of days in any imaginable way and could not find a single misbehaviour. If you do find anything suspicious, please tell me and I will have a look into it!
Short overview:
- WPA2 (implemented by Cloudyfa)
- IR fixed and fully operational
- CommManager re-arranged (showing 8 of 12 functions)
- added CommManager link to Control Panel
- added OCX Skin for Windows Media Player
- minor registry tweaks
- general clean-up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download links:
Non-UC:
http://www.megaupload.com/?d=BUE5QGCM
UC:
http://www.megaupload.com/?d=XR56UAB4
I will try
I will try for sure.
removed extended rom lable (S4V.19209.01)
Anyway. I will do that on next release, and name it with my name.
So lazy to do that.
hihi
varanusvincent said:
I will try for sure.
removed extended rom lable (S4V.19209.01)
Anyway. I will do that on next release, and name it with my name.
So lazy to do that.
hihi
Click to expand...
Click to collapse
fair enough. i just removed it without putting in my name...
ANy screen shoots please?
chriskay said:
fair enough. i just removed it without putting in my name...
Click to expand...
Click to collapse
why dont you put your name on it. hihi.
It is okay too.
I think I like this! I will give it a try.
Nice ROM . Looks like an original one.
Good job chriskay.
I like this one.,
My first impression is very good, a splendid base-ROM. It is a bit to clean for my taste, but I prefer to add my favorites to my device by myself instead of being busy removing and altering what I don't like. So, a big thanks!
One small remark though (I have to, it is genetic) I think this commanager is to much Touch styled. In fact, the one in Korand's ROM is the most plain buttonstyled one (but is a pain to the eyes).
rondol1 said:
One small remark though (I have to, it is genetic) I think this commanager is to much Touch styled. In fact, the one in Korand's ROM is the most plain buttonstyled one (but is a pain to the eyes).
Click to expand...
Click to collapse
yeah, i know. i was looking around for some decent skins. but due to the neutrality of black also matching the original black dialpad, i thought it might suit just anybody best, since now, everyone can chose whatever theme colour they like, you see? moreover, the basic commmanager only supports 7 functions to my knowledge.
chriskay said:
yeah, i know. i was looking around for some decent skins. but due to the neutrality of black also matching the original black dialpad, i thought it might suit just anybody best, since now, everyone can chose whatever theme colour they like, you see?
Click to expand...
Click to collapse
You are probably right. Anyway I have a habit about "greening" things up, so it don't bother me at all. If I bump in to a nice, neutral skin that matches the black dialer, I will remember you...
BTW you did upgrade the solitaire images, didn't you?
nope. this sort of "patch" might be nice for wm5. but the patched images just look rubbish compared to wm6 solitaire. only the cover images do look better. but that is not worth the "upgrade".
chriskay said:
nope. this sort of "patch" might be nice for wm5. but the patched images just look rubbish compared to wm6 solitaire. only the cover images do look better. but that is not worth the "upgrade".
Click to expand...
Click to collapse
Now you know how often I have played Solitaire since I flashed WM6.... never noticed those upgraded images before!
BTW one thing I did like about Cloudyfa's extended design was the colored keyboard. Is it simple to install that one again? Wich files are involved?
i could provide you with the msim.96.dll which contains the green skin. but just copying it into the windows folder won't do the trick. i don't know if there is another way apart from recooking the rom. sorry!
Why is the top bar one solid colour?
or is that because of the screnshot program?
jspacemarine said:
Why is the top bar one solid colour?
or is that because of the screnshot program?
Click to expand...
Click to collapse
that is the official new design of wm6.1. i got used to it and now like it pretty much. looks a bit like vista now.
anyway, if you don't like it, delete registry key [hkcu\software\microsoft\today\windows mobile 6.1.tsk]
dear chriskay, can u upload WMP Skins (like in ur ROM) in cab file?
thanx in advance
Thanks very much!
chriskay said:
i could provide you with the msim.96.dll which contains the green skin. but just copying it into the windows folder won't do the trick. i don't know if there is another way apart from recooking the rom. sorry!
Click to expand...
Click to collapse
recooking shouldn't be a problem, I you could upload that dll file I would be gratefull. Is it just a matter of replacing when cooking or is there more involved?
A lot of questions, but you did just that what I had planned to do, except from some minor details. You have saved me a lot of trial-and-error!
rondol1 said:
You have saved me a lot of trial-and-error!
Click to expand...
Click to collapse
that is more or less exactly what i did. as i said, i am quite new to the cooking business. but it was quite some fun and interesting, and sometimes a pain in the arse... so, you should give it a try...
anyway, i upload the dll which just has to be replaced in the dump folder. BUT it is a module dll. so you can copy it right into the module folder or create one yourself with reversemode.exe. either way, before building the rom, you MUST use G'Reloc.exe. otherwise, it will most likely not work. that is at least my experience from replacing the touch.dll. i used neokit035 which still has g'reloc included. the same procedure is probably necessary when replacing any other module.
by the way, i was thinking to strip off the black commmanager skin and go for the basic blue one, since the black one has a tiny little minor flaw... it has got to be just perfect, you know (that is also genetic )?
p. s.: attached the entire module
Before reading more, check out my new iOmEgA ROMs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM dated 09-13-2009
Features:
Old, better looking (in my opinion) WM 6.5 GUI (more slick, takes up less space on your screen);
29% to 32% RAM consumption;
Touch delay fixed;
GPS lag fixed;
Navigation and Footprints hardware buttons change functions enabled by default;
Native support for .rmvb filetype;
HTC Bluetooth Fix - Check HTC site for further details.
English:
This is the same build as dancer_69's first post, but it is in 0409 World Wide English with all of original Iolite's OEMs (also in 0409 World Wide English), not the HTC Mega ones.
This is basically your Iolite ROM with just an updated OS to WM 6.5.
Download the ROM by clicking here.
Since I cook the ROM myself, I changed the bootscreen to one of my authorship with my nick in it and I do not allow you to use it or edit it without my consent. Those who don't like it, can do one of two things - either use another ROM or figure it out by themselves. Complaints or questions regarding that will not be answered politely. Credits go to ME. If you want your name in it, build your own damn ROM.
Useful software for your Iolite here, just ask or Google it.
TF2D or Manila2D included and working like a charm.
Please vote and let me know what you think. Also you can donate...
Inherent Windows Mobile bugs:
1- When you start your device, the Messaging application will start in a weird way. You can tell by seeing an "X" where the Task Manager should be and the Softkeys saying "Messaging" and such. It would appear that the device is frozen. No worries, just click "X". All is good.
2 - "Finger-mouse" not availble for build 23016.
Everything else works like a charm.
Hope you enjoy it.
Best regards.
Screenshots available - They are in Portuguese 'cause I got lazy and didn't take screenshots of them in English, 'cause I already made this exact same ROM in Portuguese before, but I assure you this ROM is in English as well as every single application.
Screenshots:
My Custom Theme for TF2D and Custom BootScreen:
By fingermouse you mean the scrolling middle hardware button?
This must works if you include smarttouch package from original Iolite's EXT folder.
I haven't any problem in this, or any other build with scrolling button with the presence of this package.
Fingermouse
dancer_69 said:
By fingermouse you mean the scrolling middle hardware button?
This must works if you include smarttouch package from original Iolite's EXT folder.
I haven't any problem in this, or any other build with scrolling button with the presence of this package.
Click to expand...
Click to collapse
Hey, dancer_69...
No, by fingermouse I mean the ability to drag-and-drop Start Menu Items by long pressing them and moving your finger, as opposed to popping up the dialog "move to top" or "move to bottom"...
But thank you for your input and for having been an inspiration for cooking.
Best regards,
Thanks, billabongstaf, I've installed this Rom about 20 minutes ago. My first notice is that in the Manilla Tf2d when you click "all settings" it runs only connection setting and not all the settings... is it supposed to be so?
hmm i wont mind if the voter who voted "very bad" to state the reason so? Can no longer check who voted what so cant ask you.. :s
Sharing is great! hahax might try this ROM this weekend or something
Thanks billabongstaff. x)
All settings
Baga12 said:
Thanks, billabongstaf, I've installed this Rom about 20 minutes ago. My first notice is that in the Manilla Tf2d when you click "all settings" it runs only connection setting and not all the settings... is it supposed to be so?
Click to expand...
Click to collapse
I'm betting it is supposed to be like that, since when I got my Iolite it did the exact same thing. The "All Settings" are regarding the Comm Manager, as to my knowledge.
Best regards,
Thank you
lovinher said:
hmm i wont mind if the voter who voted "very bad" to state the reason so? Can no longer check who voted what so cant ask you.. :s
Sharing is great! hahax might try this ROM this weekend or something
Thanks billabongstaff. x)
Click to expand...
Click to collapse
Would like to know who voted very bad too... I don't think it's that bad. Oh, well, everyone is intitled to their opinion... I'm betting others will vote more positive.
You're welcome, lovinher.
Best regards,
voted. And I'm running this rom now.. Zomg. it is great in fact.. Hahah.. xDD Stable.. And the bug mentioned has not yet appeared.. o.o..
Nice one dude!
Thanks
lovinher said:
voted. And I'm running this rom now.. Zomg. it is great in fact.. Hahah.. xDD Stable.. And the bug mentioned has not yet appeared.. o.o..
Nice one dude!
Click to expand...
Click to collapse
Glad you like it.
Thank you for your complement and your vote.
Will keep on developing.
Best regards,
billabongstaff, thanx for rom.
But why it's stutering? Even when i scroll today screen?
No stutering
ZILLKA said:
billabongstaff, thanx for rom.
But why it's stutering? Even when i scroll today screen?
Click to expand...
Click to collapse
Hey there, ZILLKA, you're welcome.
I only have stutering for about five or six seconds after boot 'cause some programs are still loading. After that no stutering for me. At all.
But if you still have that issue, try getting Chainfire's GFXBoost 1.1 by clicking here, installing it and then soft-resetting your device. Everything should work like a peach now.
Best regards,
not being a fag here but after flashing the roms to and fro, i guess with mega packages really screw the phone up well. LoL. Back to iolite packages! This is stable for me.
Vote
lovinher said:
not being a fag here but after flashing the roms to and fro, i guess with mega packages really screw the phone up well. LoL. Back to iolite packages! This is stable for me.
Click to expand...
Click to collapse
So sorry to hear you had to revert, but I'm glad you chose my ROM to revert to...
You guys, kindly do not forget to vote, so that other people will now how good (or bad) this ROM is...
Best regards,
Good stuff here
--- sorry wrong thread posting ---
Cheers
g77 said:
--- sorry wrong thread posting ---
Click to expand...
Click to collapse
Tuga cheers, my man!!!
just to thanks for your excellent work so far my friend i have voted hope you keep it up i was just starting to cook my own roms on my diamond when it was stollen it was replaced with an 02 guide. this iolite forum needs more people like you that try to push the boundry's that make our phones better
Many thanks
Hello
Looks ok the rom, but the clicking problem is really annoying. And it does not happen only in File Explorer, but in more applications that use file listings, making some of them unusable with the touchscreen, must use the directional keypad
Taken into consideration
4EST said:
Hello
Looks ok the rom, but the clicking problem is really annoying. And it does not happen only in File Explorer, but in more applications that use file listings, making some of them unusable with the touchscreen, must use the directional keypad
Click to expand...
Click to collapse
I'm guessing you're referring to my other release, the one with HTC Mega packages, not this one, this does not have any touch delay... But even still, I know it can be a pain in the neck and so I'm whipping up a new ROM based on the HTC Mega's Official ROM, that came out September 24th (not the packages, but the ROM itself)...
Let's see how that goes...
Looks like I posted in the french instead of english thread before. I am actually using this one and am very pleased with it - thanks!
Also, you helped me with the signature in the other thread. Any idea how I can change the message size? I am having most messages not download due to size, so I have to click, re-send/receive email to view it. How can I change the settings to increase size?
Thanks again, still testing it, but it seems very good so far, minimal stuttering and nowhere near as much lag as the other flash I did.
Sean09 said:
Looks like I posted in the french instead of english thread before. I am actually using this one and am very pleased with it - thanks!
Also, you helped me with the signature in the other thread. Any idea how I can change the message size? I am having most messages not download due to size, so I have to click, re-send/receive email to view it. How can I change the settings to increase size?
Thanks again, still testing it, but it seems very good so far, minimal stuttering and nowhere near as much lag as the other flash I did.
Click to expand...
Click to collapse
Answering my own question:
To edit message size limits, open an email, hit the OK button in top right, and from your list go to the menu, then TOOLS -> Options, then tap your account. You can now edit the space settings and download options for attachments.
Hey!
I've been working on a project the 4 last months and it's looking pretty good now. It's only compatible with WVGA devices (480x800 resolutions).
What is it?
iPhoneUI is a shell for the Windows Mobile system. It works on the Windows Mobile 6.0, 6.1 & 6.5 systems.
It is maximized which means that this will "overwrite" your booring original windows homescreen.
It features a nicely made topbar, sliding between pages, a lockscreen and some widgets.
Before starting
*Please COMMENT & give me feedback and suggestions on what i should add to the application. Without you I won't be able to improve the shell.
*If you like my work, please be generous and donate a few bucks to support my work Donate here
Instructions
1. Go to my website (http://www.chabbeclub.tk)
2. Download the latest build & the .NET 3.5 cab from my website.
3. Install (if not already installed on your device) the dotnet.cab file.
4. Then install the latest iPhoneUI build
5. Soft-Reset device (if needed) and you're good to go!
Latest Changelog
Made changes in topbar
Remade the UnlockWidget. I've added a UnlockSlider.txt in iPhoneUI folder that the application now uses to view text in the unlockwidget.
Added option to change the Unlockslider.txt file in options menu.
Also added abillity to change the vibration pattern in the options menu.
Removed the battery charging icon and instead it will now show a dot (.) infront of the battery percentage when charging
Also deleted the ugly battery icon in topbar.
Problems/Bugs
**A serious bug which I at the moment can't seem to fix. The problem is that the multi-pages function only works with english and swedish devices. All other devices will only be able to get the first and last page.
Temporary solution to viewing all the pages for non-english/swedish devices
First, you need to download and install the latest build from my website.
Then go to Program(s)/iPhoneUI and transfer the Shellconfig.xml to your computer
Open it up with notepad
Press Ctrl + F and search for <targetFolder>\Windows\Start Menu\Programs\</targetFolder>
When it has found the text, change the targetFolder to where your programs folder is located. Unfortunately you have to do this manually.
Press save and upload it to the Program(s)iPhoneUI folder, if needed overwrite the previous.
Restart application and done! Now the multi-pages should work for all devices, even for the non-english/swedish.
Notice
This project is closed due to not beeing appreciated, and therefore don't expect to recieve any answers or help from me although I'll try and help you the best way I can. My website will still be up for those of you who wants the application.
Screenshots
Screenshots of the official build (Version 0.3.6a)
English:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Swedish:
Screenshots and changelog of upcomming release
No new build at the moment
FAQ
FAQ
[*] I am receiving an error. Its telling me to install NETCFv35.Messages.En.cab but I have already installed the dotnet.cab. What should I do?
- Please try and download this file. Install it and then run my application. If needed, restart device.
[**]I'd like to donate a few bucks. What should I do?
- Please follow this link.
More to come
How is this different than iPhoneToday or iFonz?
thesecondsfade said:
How is this different than iPhoneToday or iFonz?
Click to expand...
Click to collapse
x2.....iphonetoday is a champ right now for me..
whats the difference with this one
x3 same think
thesecondsfade said:
How is this different than iPhoneToday or iFonz?
Click to expand...
Click to collapse
apax said:
x2.....iphonetoday is a champ right now for me..
whats the difference with this one
Click to expand...
Click to collapse
magawa said:
x3 same think
Click to expand...
Click to collapse
Hey guys,
The difference is that it's using a fullscreen and because of that I have a topbar. But this app is slower and the iphonetoday app is better according to some, not me . But I've been working on it for 4 months now and it's really turning out... As if now, the iphonetoday is a little bit better but I'm working on it every day
Come on guys, be good sports and admit it's the first of iPhone clones to look exactly like a real one. Thumbs up chabbe11 and good luck with the development, you have tough competition
not really an iphone fan. but am a supporter to developers like you. Keep it up!
(Instead of this GUI, why not create your own? Need help, can look for me. Of course, this is not to dampen you, but to give more options for you. )
tito12 said:
Come on guys, be good sports and admit it's the first of iPhone clones to look exactly like a real one. Thumbs up chabbe11 and good luck with the development, you have tough competition
Click to expand...
Click to collapse
wangiles said:
not really an iphone fan. but am a supporter to developers like you. Keep it up!
(Instead of this GUI, why not create your own? Need help, can look for me. Of course, this is not to dampen you, but to give more options for you. )
Click to expand...
Click to collapse
Thanks for the kind words guys. Hopefully, this will be appreciated by many
Schysst med ett svenskt tema, det är anledningen för mig att använda detta istället för iPhoneToday.
---------------------------
Nice with a swedish theme, this is the reason why im using this instead of iPhoneToday.
95alexander95 said:
Schysst med ett svenskt tema, det är anledningen för mig att använda detta istället för iPhoneToday.
---------------------------
Nice with a swedish theme, this is the reason why im using this instead of iPhoneToday.
Click to expand...
Click to collapse
Trevligt att prata med en svensk. Lägg dock märke till att den är väldigt seg. Jag släpper dock 0.2.1a imorgon som innehåller en hel del förändringar, design förbättringar och snabbhet
wangiles said:
not really an iphone fan. but am a supporter to developers like you. Keep it up!
(Instead of this GUI, why not create your own? Need help, can look for me. Of course, this is not to dampen you, but to give more options for you. )
Click to expand...
Click to collapse
I agree. you seem like a great developer. Why not add some features that aren't available even on iPhone... like widgets... music player, picture frame viewer, etc. like with Android?
thesecondsfade said:
I agree. you seem like a great developer. Why not add some features that aren't available even on iPhone... like widgets... music player, picture frame viewer, etc. like with Android?
Click to expand...
Click to collapse
I'll try, but as if now I need to focus on speeding the application up. It's far to slow. Then maybe I'll need to get help from someone.
btw. LOVE your profile image Chuck is great
chabbe11 said:
btw. LOVE your profile image Chuck is great
Click to expand...
Click to collapse
Best show on TV right now
Like we all know, the competition makes things better.
I just installed it, to try it out. Unfortunately as you might be aware too, it is too slow and even the graphics seems to be a bit enlarged (Not at all eye candy). To be frank, i did not even explore all the options before i uninstall it.
Thought of having some more versions of wait, before i can try again.
Definitely this app is lot behind the IPhonetoday. I see more potential in having a revolutionary work like 'TouchXperience' UI. It really brings out the new ideas in how else the UI can be...
Just my few thoughts out for you...
chaitandeva said:
Like we all know, the competition makes things better.
I just installed it, to try it out. Unfortunately as you might be aware too, it is too slow and even the graphics seems to be a bit enlarged (Not at all eye candy). To be frank, i did not even explore all the options before i uninstall it.
Thought of having some more versions of wait, before i can try again.
Definitely this app is lot behind the IPhonetoday. I see more potential in having a revolutionary work like 'TouchXperience' UI. It really brings out the new ideas in how else the UI can be...
Just my few thoughts out for you...
Click to expand...
Click to collapse
Sure thing, thank you for beeing honest.
I'm well aware that this is very very slow and that the graphics isn't the best. But I'm trying to fix all of that in order to release a good beta, or even the complete version of the app. Thank you though for giving me feedback
I just want to inform you that I'm releasing the 0.2.1a version tomorrow. I'm going through final steps at the moment
though i was never really an iphone fan, i like the fact that people like you try to create things in one way or another.
when the time is ripe and when possible this app can be skinned to look as much as unlike an iphone as possible, that would be something! (me thinks)
for the time being, keep up the good work!
If you want to cook your own rom, just send me a pm
Click to expand...
Click to collapse
Hi all NEON400 users, they asked me to make a rom for you guys, so I decided to give it a go.
Before you flash this rom just make sure you did THIS.
I recommanded to flash through sd-card:
1. Format SD card to FAT32
2. Copy the NBH file and rename it to NEOCIMG.nbh (already did that )
3. Pull and reinsert the battery
4. Press the camera button and the power button
5. Complete update process, press power to start.
6. Reset using button beside USB when completed.
Just keep in mind this is only a testrelease, I can not test it myself because I don't have a NEON400.
Before you place a comment, please people only place comments about this rom and don't place such comments as "'your is better then deepankerjha's rom or deephankerjha's rom is much better then yours''.
We are only trying to help you so keep the comments friendly.
Just one thing be aware you use it at your own risk.
Goodluck and plse keep me informed asap.
Special thanks
* jockyw2001 for the Hardspl
* deephankerjha for started cooking for the NEON400
* airextreme and ondraster for their kitchen
* 88fingerslukee (and his GF) for testing and pictures
* IronSky for testing
* brenky for testing
* jdarkis for tutorial about flashing through sd-card
* d_train for all the tips
* and the rest of you
Click to expand...
Click to collapse
NEON 13-01 Original OEM no EXT
NEON 13-02 Stripped OEM no EXT
NEON 13-03 Stripped OEM few EXT
Just want to say thanks to thesteve42 for pointing me in the right direction
The reason I added 3 versions is because a NEON400 user is willing to help me to make a rom for the NEON400, so I really need feedback
Plse also take a look HERE and try to see which cab's works on the NEON400
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pictures are from Neon 2
Have fun,
Note: Didn't add Neon RUU in the link, so download the zipfile to make it complete for flashing, not needed by flashing through sd-card
Thanks Rata! I'll test this tonight!
Rata, I flashed it twice and it won't boot. It gets stuck at the second splash screen (the Telus one).
I flashed once, tried to boot it, flashed a second time then tried to boot then I hard reset and tried to boot. It didn't boot once. It also doesn't show the ROM and Radio information like it usually does in the splash screen.
thanks for the effort. I'll keep testing.
88fingerslukee said:
Rata, I flashed it twice and it won't boot. It gets stuck at the second splash screen (the Telus one).
I flashed once, tried to boot it, flashed a second time then tried to boot then I hard reset and tried to boot. It didn't boot once. It also doesn't show the ROM and Radio information like it usually does in the splash screen.
thanks for the effort. I'll keep testing.
Click to expand...
Click to collapse
Okay, thanks for the info, I'll switch from kitchen and release another build asap.
New build on top,
Goodluck
Rataplan said:
New build on top,
Goodluck
Click to expand...
Click to collapse
Beautiful! This one boots perfectly! Will let you know about any issues. Seems very very fast. I believe it has something to do with the cube having been removed.
88fingerslukee said:
Beautiful! This one boots perfectly! Will let you know about any issues. Seems very very fast. I believe it has something to do with the cube having been removed.
Click to expand...
Click to collapse
Okay, one issue is with the SMS tab in Titanium. It doesn't show the texts. See the attached screenshots.
Is there some reg setting that'll take care of this? It seems like it should be simple.
Also, in the 3rd screenshot there are two versions of USBtoPC...only the one of the left works.
A couple other issues probably relating to the same things:
When I plug in the USB cord I get an error on popup.
I cannot send text messages. I think it has something to do with the SMS program? SMS receive works and call place and receive also works. Cannot test data as this phone doesn't have a data plan.
88fingerslukee said:
Okay, one issue is with the SMS tab in Titanium. It doesn't show the texts. See the attached screenshots.
Is there some reg setting that'll take care of this? It seems like it should be simple.
Also, in the 3rd screenshot there are two versions of USBtoPC...only the one of the left works.
Click to expand...
Click to collapse
Great, it's working, I take a look at the reg setting and inform you asap about that, just need to know if all the function are working.
So I attached a checklist, please take a look at it.
For now have fun with testing.
Rataplan
88fingerslukee said:
A couple other issues probably relating to the same things:
When I plug in the USB cord I get an error on popup.
I cannot send text messages. I think it has something to do with the SMS program? SMS receive works and call place and receive also works. Cannot test data as this phone doesn't have a data plan.
Click to expand...
Click to collapse
It seems that you are a bit quicker then my reply, please see the checklist and I'll try to release another build asap.
Greetz,
Rataplan said:
It seems that you are a bit quicker then my reply, please see the checklist and I'll try to release another build asap.
Greetz,
Click to expand...
Click to collapse
oops, sorry
Yes, Preconfig launches - works perfectly
Phone boots in 28 seconds
IR N/A
Wifi N/A
BT works
No data plan so cannot test data, however EV is displayed which is the proper image
BT connects to my PC but have not tested A2DP or standard headset.
MMS untested
SMS receives but does not send
Hardware keyboard works but there is no t9 multi-tap.
Button pressed will only type the first letter printed (i.e. QW key only types q...5GH key only types 5 etc)
Slide of keyboard performs no screen action.
Voicemail prompts
Dialer has a vertical scroll bar which can scroll for a while. Weird. See screenshots.
Dialer buttons function properly
Background is proper
Smart Dial works properly
Smart Dial is readable
Ringtones work
Calls place correctly
Incoming announced correctly
Missed calls recorded correctly
Memory and phone info is correct (see screenshot)
Will ignore program testing for now
ROM version is displayed
Phone feels very very fast (as compared to the stock 6.1 and another 6.5 ROM)
Unsure what pagepool is set to now or what the effects of it;s change would be.
Telus neon400 user here
In addition to the last post, I can't turn bluetooth on or off from the communication manager (the HTC thingy )
However, I can turn it on manually if I go to Start -> Settings-> Bluetooth
Just a note...the phone feels very fast compared to the stock 6.1 rom. Keep up the good work!
Thanks buddies
@ 88fingerslukee Thanks for testing and the testreport
@ IronSky Thanks for testing
Okay read the testresult from 88fingerslukee and I think the hard work for me is to get sms working, from what I can understand from the both of you, it's a pretty stable base to continue with, so this is what I'm gonna do right now is to create the same rom on my Niki and see if I have the same errors, after that I will release this one and a full rom.
Try to make it asap.
Really appreciate you guy's had the courage to test the release.
Greetz,
Rataplan said:
Really appreciate you guy's had to courage to test the release.
Click to expand...
Click to collapse
We really appreciate you taking the time to help us out with our ROM!
BTW, you don't know how much courage my testing takes! This is my girlfriend's phone and she uses it all the time (complaining about the Stock ROM all the way I might add). I have to wrestle it away from her to do the testing and then put it all back afterwards so she can actually use it.
Thanks again Rata, will test the new ROM as soon as you can release it.
Added new build
Rataplan said:
Added new build
Click to expand...
Click to collapse
downloading now.
UPDATE:
Same issues persist, in both Manila and Titanium. I didn't notice this before, but "New" in the SMS Menu is grayed out. It will not allow the creation of a new message.
Dialer still has vertical scroll bar.
I have removed this ROM so that the GF can use her phone. Will test the next version.
88fingerslukee said:
downloading now.
UPDATE:
Same issues persist, in both Manila and Titanium. I didn't notice this before, but "New" in the SMS Menu is grayed out. It will not allow the creation of a new message.
Dialer still has vertical scroll bar.
I have removed this ROM so that the GF can use her phone. Will test the next version.
Click to expand...
Click to collapse
Okay thanks, it seems that I deleted something so the new sms doesn't work, I have to check the complete build also have to check the dialer, thought I fixed it but there is still a vertical scrollbar, also take a look at that.
Thanks,
Rataplan said:
Okay thanks, it seems that I deleted something so the new sms doesn't work, I have to check the complete build also have to check the dialer, thought I fixed it but there is still a vertical scrollbar, also take a look at that.
Thanks,
Click to expand...
Click to collapse
Thanks Rata, sorry about my short reply up there...I didn't have time to get all fancy with my words.
I didn't notice much change from the v.2 ROM except the speed was a little slower (most likely owing to Manila being included). All-in-all the touchscreen response on these ROMS is the best this phone has ever had. It's always been sluggish to respond but now it's snappy.
I think if we could port Android to this thing would be the best in the long run though.
88fingerslukee said:
Thanks Rata, sorry about my short reply up there...I didn't have time to get all fancy with my words.
Click to expand...
Click to collapse
I already thought your GF wants her phone back
I didn't notice much change from the v.2 ROM except the speed was a little slower (most likely owing to Manila being included). All-in-all the touchscreen response on these ROMS is the best this phone has ever had. It's always been sluggish to respond but now it's snappy.
Click to expand...
Click to collapse
It's correct for now I'm using the same build, if we solved all the issues it's easier to switch from build.
I'm glad the response is ok if someone of the NEON400 users find a way to get sms working by including a cab or something simular, plse let me know.
I think if we could port Android to this thing would be the best in the long run though.
Click to expand...
Click to collapse
I know it's fun to play with Android but I can't help you with that.
Okay buddy, thanks for your reply and I will continu cooking.
Greetz,
Rataplan said:
Okay buddy, thanks for your reply and I will continu cooking.
Click to expand...
Click to collapse
No...thank YOU!