[Q] Getting back to Stock ROM? - Vibrant Q&A, Help & Troubleshooting

gotta a question about getting back to stock rom on my vibrant:
so i rooted and flashed to nero v5 the other day and i'm loving it...
but b4 i flashed to nero i did "backup current rom" and thought that i backed up my stock rom but i realized later that i was never in "clockwork" recovery at that time, just "samsung" recovery...
so did it even backup my stock rom at all?!
how do i flash back to stock now?
thanks for any help!

You have to flash clockwork recovery to make a nandroid backup. Flash it in ROM Manager, then select "Reboot Into Recovery." That will take you to Clockwork Recovery. You can make your backups from there.

use odin
is the easiest way
and it will unroot your device
http://forum.xda-developers.com/showthread.php?t=747335
should be the third one on the page
the one with JFD

i followed this guy
helped a lot
http://martint.net/2010/how-to-use-odin-to-go-back-to-stock-jfd-2/
good luck

thanks guys for responding... i'll check out odin and see if that works
didn't want to go there cause i have a mac, but i'll borrow a friends pc

djordan79 said:
thanks guys for responding... i'll check out odin and see if that works
didn't want to go there cause i have a mac, but i'll borrow a friends pc
Click to expand...
Click to collapse
it should still be the same though
im not a mac person, so im probably not the expert on that
but the video did help

Related

Anyone know of a custom ROM....

That can be flashed through Odin?
Im unable to flash any ROMs through CWM or through recovery since I have a problem with the SD card (had this problem after flashing a stock Froyo ROM) also after doing this I cant get into recovery or download through the 3 button combo, used to be able to do it but cant anymore for some reason (I think its also because of the Froyo flash), I have CWM installed and every time I try to flash any ROM it gives me an E:Error cache/sd (Status 2)
I havent been able to fix this issue, so I thought of trying to work around it, I am able to get into download mode using ADB, so I was hoping to find a custom ROM that can be done through Odin, by trying a new custom ROM Im hoping to get rid of my SD card issue (card says its write protected but its not)
Your best bet would be to odin back to stock and go from there. Start back off with a clean slate and be able to use ClockworkMod. Just check the stickies for the proper procedures.
Oh, and just for reference, you are putting the .zip ROM file on the root of you internal memory? If not, try that with ClockworkMod again and see what happens.
Sent from Andromeda Galaxy!
I would have to second the Odin back to stock recommendation as well.
Last thing you want to do is soft brick the phone while it's hardware locked. That's a recipe for hard brick if I ever saw one.
offdutyninja808 said:
Your best bet would be to odin back to stock and go from there. Start back off with a clean slate and be able to use ClockworkMod. Just check the stickies for the proper procedures.
Oh, and just for reference, you are putting the .zip ROM file on the root of you internal memory? If not, try that with ClockworkMod again and see what happens.
Sent from Andromeda Galaxy!
Click to expand...
Click to collapse
Ok thanks for the advice, ya I had it in the root of my internal SD card
Drewstein said:
I would have to second the Odin back to stock recommendation as well.
Last thing you want to do is soft brick the phone while it's hardware locked. That's a recipe for hard brick if I ever saw one.
Click to expand...
Click to collapse
When you guys say stock... do you mean back to stock 2.1 or 2.2?
All my issues have started from flashing a stock 2.2 ROM
Do you guys have a link to a stable stock ROM?
I think I still have the stock ROM that I flashed but Id rather not use that one
Thanks for the help guys
DT3CH said:
Ok thanks for the advice, ya I had it in the root of my internal SD card
When you guys say stock... do you mean back to stock 2.1 or 2.2?
All my issues have started from flashing a stock 2.2 ROM
Do you guys have a link to a stable stock ROM?
I think I still have the stock ROM that I flashed but Id rather not use that one
Thanks for the help guys
Click to expand...
Click to collapse
I am referring to stock 2.1. All the Froyo builds are unofficial. Just do a search in the vibrant Android dev section for JFD. That is the latest official Rom, which 2.1.
Sent from Andromeda!

can't get into recovery on rooted Vibrant

I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
Download ClockWork's Rom Manager from the market "Rom Manager" and install their recovery from inside the app - hope this helps.
You can try to do the ROM manager flash CwMRecovery, boot into blue recovery choose "reinstall packages" and that should give you green recovery.
The above process may need to be repeated multiple times. Once you access green recovery choose "apply sdcard:update.zip" then choose "advanced" and "reboot recovery"
I personally don't think you should not be using any one click root app to aquire ROOT. I would suggest you uninstall any said app and ROOT your phone properly, you can use the GUIDE sticky and it should be fairly straight thru and easy. Good luck!
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
I would Odin back to stock and start over.
Here is info how to do it.
http://forum.xda-developers.com/showthread.php?t=849028
You can use the toolbox to do this
http://forum.xda-developers.com/showthread.php?t=954509
Just download SGS kernel flasher from the market and flash a voodoo injected kernel. You will then have voodoo red recovery. BOOM!
nomadrider123 said:
I would Odin back to stock and start over.
Here is info how to do it.
http://forum.xda-developers.com/showthread.php?t=849028
You can use the toolbox to do this
http://forum.xda-developers.com/showthread.php?t=954509
Click to expand...
Click to collapse
I did this method and it is back to stock and has lost it's root. I need to root it again. can you point me in the right direction for a good root process? I am new to the Vibrant. Knew everything about the myTouch 4G and now have to switch my thinking. It's quite different. I would appreciate it. Thanks
install rom manager and then do a clockwork recovery from thereonce u have that done. Then u get the update package and do the 3 button combo and u will be on a blue screen and then install packages u will have to do this twice. after that it will turn green and ur there and rooted.
Ok, it's just not reinstalling packages for me again. I used Odin to get back to stock, and I lost root and was back on 2.1 Eclaire. I used Super one click to get root back. Flashed Rom Manager. Went into recovery with volume up and down and power. I was able to install packages and it worked and got me to green CWM. Then I installed the 2.2 update using Keis, flashed Rom Manager. I went back into recovery, I got the blue screen again. Tried to reinstall packages and it aborted again with signature error, tried multiple times and no go. What is up! I just can't get it to work. I certainly do not want to stay on 2.1 Eclair.
pdxmatts said:
Ok.............I used Super one click to get root back................ I was able to install packages and it worked and got me to green CWM. Then I installed the 2.2 update using Keis...............I certainly do not want to stay on 2.1 Eclair.
Click to expand...
Click to collapse
I honestly think the signature issue is due to kies update or the one click root option. (prob the kies update but not sure)
- This is the method I use to ROOT and would suggest everyone use as well:http://forum.xda-developers.com/showthread.php?t=723479. Once in green recovery I would recommend making a nandroid backup before moving on.
- I would not recommend using kies to update to 2.2.
If you just want stock 2.2 I would suggest try this: http://forum.xda-developers.com/showthread.php?t=1036193. I would suggest you use the CwM version opposed to the ODIN version for reasons stated by OP there.
- Honestly I would search the Vibrant Android Development thread and take a look at some other custom ROMs you might like. You might like Bionix1.3.1 its 2.2 firmware and the theme and mod option support is out of this world. There are alot of 2.2.1 ROMs available as well you might like.
Take a look at the Bible for options: http://forum.xda-developers.com/showthread.php?t=991267
pdxmatts said:
I recently got a Samsung Vibrant that was already perm rooted (I think he said he used a one click method) the problem I am having is that when I go into recovery I get a blue menu. At that menu I select reload packages and it aborts with a not signed signature error. I can't get to the green recovery screen to flash Roms or do a Nandroid back up. Can anyone help me with this? Thanks
Click to expand...
Click to collapse
You need to install a stock recovery replacement that doesn't check the signature. http://forum.xda-developers.com/showthread.php?t=833423 tells how. Or just Odin back to a firmware from before signature checking in the recovery screen was activated, but then you may have to re-root your phone.
The version of 2.2 that Kies installs has the signature checking recovery, so if you're running with that, you'll have to replace your recovery. Anything earlier, and you should be fine without.
I just want to say thank you to everyone for being so helpful. TMO is sending me a replacement because I was having freezing issues and email notifications not working. I will definitely root it the correct way and use all your helpful links. I think my next phone is going to be the SGS II. Can't wait for the US release
why do you need the kies update if you just wanna flashed a custom rom? you dont need to
flipnotiq said:
why do you need the kies update if you just wanna flashed a custom rom? you dont need to
Click to expand...
Click to collapse
Are you saying that all Rom's run on 2.1? I tried Darky's 9.5 Rom and it fc'sd everything and threw my phone into constent ringing.
I think the BIG issue is just NOT to do the samsung kies update thats what borks things up. Its easier to root everything from 2.1 and then if you want 2.2 or 2.2.1 or 2.3 just flash custom ROMs. If you want to do the official samsung kies update I would suggest not to ROOT at all. Just get your new phone and update it. Good luck!
I definitely want to root it. I changed Rom's all the time on my myTouch 4G. I'll get it worked out
Awesome! I'm sure you'll get it just the way you want it, personalized to fit your tastes. Just keep in mind to stick with custom ROMs after you ROOT and not to do the samsung kies update. There are a number of GREAT 2.2 and 2.2.1 custom ROMs available for our device with little or no bugs at all thanks to the hard werk of multiple Devs and Dev teams with unlimited theme and modification options, hope you find exactly what your looking for. Good luck!
need help. i flashed 2.3.3 and it wont go into recovery now. tried both 3 button combo and rom manger into recovery. just reboots my phone
After you flash the update.zip and get root. You dont have to do the kies update in order to flash other roms. Just root and dont do the kies update. Remember after you flashed a custom rom wait 10 minutes n reboot. Theres alot of guides in here . Check the stickies. I would recommend trigger 3.2 with bullet
Sent from my SGH-T959 using XDA Premium App
Thank you to everyone for your help. I got my replacement today. It's like brand new I rooted the correct way and was able to get a Rom and kernal to load just fine on 2.1. Now have Red Voodoo menu in recovery. All is great now that I figured it out. Thanks again.
Glad it work out just fine.
Fast Dont Lie

make wifi gtab 10.1 stock again

how do i make my gtab stock again. i rooted it and im running it on a 3.2 custom rom but want to make it stock 3.2 rom and unroot it
Did you take a nandroid backup before rooting? If so, restore that in CWM.
Else find any stock Odin Rom and flash using Odin.
ariel123 said:
how do i make my gtab stock again. i rooted it and im running it on a 3.2 custom rom but want to make it stock 3.2 rom and unroot it
Click to expand...
Click to collapse
try here - http://droidbasement.com/db-blog/
i would like to know how to do this aswell
I don't always subscribe to the "search the forums" approach, but if you are smart enough to find the instructions to root and install a custom ROM, you are capable of finding unrooting instructions without creating a new thread. Hint: the instructions to unroot are immediately after the instructions on how to root...
ansonantonym said:
Did you take a nandroid backup before rooting? If so, restore that in CWM.
Else find any stock Odin Rom and flash using Odin.
Click to expand...
Click to collapse
I think I remember doing that but how would I go about doing that? Just dragged it back to the root of the grab SD?
still lost
use odin to get the stock recovery (tar).
edit, but you should be searching.
great now im stuck at the boot screen again. please help
edit nvm i got it. thanks.
I think just flash it with stock and it will be unrooted..

Am I bricked?

Last night, I tried flashing a new ROM and whenever I restarted or booted the phone, it sent me to recovery mode. I couldn't do anything about it. Today I flashed the Odin version of GeeWiz and when I try to flash a new ROM in recovery, it says "operation aborted" and when I try to restore my backup, it says "system.img not found. Skipping"
How can I fix this??? Please help very soon!
Please! Am I bricked?
I'm not sure what went wrong, you're not really supplying any details about what you did, but I would say make sure to follow droidstyle's guide exactly as he says to, and if you still have issues to come back here with exactly what went wrong.
ODIN CWMALL, then try that backup again.
See droidstyle's guide.
Worse case justODIN back to stock EH03 and start again.
MultipleMonomials said:
ODIN CWMALL, then try that backup again.
Click to expand...
Click to collapse
Didn't work.
Then your backup really is corrupted. You're not trying to restore a backup made with a different version of CWM, are you? What ROM were you on and what ROM did you flash?
MultipleMonomials said:
Then your backup really is corrupted. You're not trying to restore a backup made with a different version of CWM, are you? What ROM were you on and what ROM did you flash?
Click to expand...
Click to collapse
I was on cyanogen mod. But also If I try to flash roms through cwm, it doesn't work.
Me thinks you need to take the advice of what has been mentioned and follow droidstyle's to get yourself back to stock. That is...if you want to take a cchance on getting your phone to work again.
Sent from my SCH-R530U using Tapatalk 2
I took all of the advice. I eventually ended up using a different recovery and my roms flashed fine. I feel really stupid
OK, two new problems. My phone keeps booting into recovery, and the battery messes up. When I boot with it plugged in, it's at like 14% and when I boot without it plugged in, it's at like 65%. Please help!
Maybe try to re-calibrate the battery? The simpliest method I've come across is found here, just scroll down a bit to the section labeled 'RECONDITION YOUR BATTERY'. As far as booting into recovery, I'm not too sure what might have happened there, might just need to start again from stock like you've probably already done a hundred times

Can't Flash any Rom

Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
This worked for me
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
seerenr since
Devil-Dog said:
Mine would remove the root when I rebooted it not allowing me to install a rom also. I used the Super One Click and the root stuck. I suggest you give it a try.
Super One Click
Click to expand...
Click to collapse
my problem is not really with rooting the phone, it is rooted i just cant flash roms. whenever i try to flash a rom it reboots and gets stuck on the vibrant screen (bricked) so i have to take it back to stock
thanks though
elpromo01 said:
Greeting Devs & thanks in advance.
My t959 got bricked where it wouldn't go passed the vibrant screen, found a post called ** [GUIDE] FIX AND RESCUE YOUR VIBRICK + ODIN SUPPORT! N00b Friendly ** followed instructions on it to take it back to stock with Odin, rigth now my phone is running Android 2.1 eclair, rooted and with CWM Recovery version 2.5.1.2. im trying to flash a custom rom and when i go into recovery mode and try to do it, the progress bar at the bottom comes up and when it is at about 10% the phone reboots back to the vibrant screen and wont go passed it so i have to take the battery out put it back in and get the phone into download mode to retake it back to stock using ODIN, so i guess is safe to say that my phone gets bricked whenever i try to install a custom rom so im stuck with eclair wich blows specially after having 4.2.2
my phone got bricked the first time when i was trying to update the rom from SlimBean 4.2.2 Build 7 to Build 8 (had done the process many times and never had a problem) did the usual, put the Rom and the Gapps .rar files in the sd card and performed wipe data/ factory reset only this time i went into mounts and storage and wiped everything that was under there as well (dont know why) so when went to flash the rom it was no longer on the sd card (cause i wiped it) so rebooted my phone and it got stuck on the vibrant screen with i fixed already and my problem now is the one mentioned above
i have browsed the different forums and have tried many different methods to try to fix it for example: have brought it back to stock with Odin also with AIO Vibrant Toolbox and even tried UVKB5_Stock_Heimdall-One-Click wich is a froyo 2.2 that comes with CWM recovery with voodoo lag fix and root. even though all these methods work as far as bringing the phone back to stock i still get the same problem when trying to flash a rom, i also have installed CWM through Rom manager and also through the update.zip file i think im doing everything right and have tried multiple forums yet havent been able to find a forum about this specific issue so decided to create this thread as a last resource
this is my first post and id really appreciate any assitance and if any additional information is needed ill be happy to provide it, thanks in advance
Click to expand...
Click to collapse
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
i have re-flashed recovery multiple times i wish there was another type of recovery i could install
on another note im trying to install android 4.2.2 SlimBean and 4.3.3 and i dont know what bootloader i have nor how to check it, id appreciate it if u could show me how to check wich one i have and how to up it
thanks
firefly6240 said:
What version of android are the ROMs you are flashing?
are they above or below android 2.3?
and on the same note, do you know what bootloader you have?
some roms 2.3 and above require gingerbread bootloaders.
(an easy way to find out is by figuring out which button combo you have to use to get to recovery)
you might also try re-flashing recovery.
Click to expand...
Click to collapse
the combo i have to do for recovery is volume up and down and the power button simultaniosly
elpromo01 said:
the combo i have to do for recovery is volume up and down and the power button simultaniosly
Click to expand...
Click to collapse
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
firefly6240 said:
Try flashing a 2.2 rom or below.
if that works you probably just need to flash GB bootloaders before flashing the 4.2 rom (See Below)
if that doesn't work I wouldn't worry about the step below until we figure out why its not working.
To flash GB bootloaders go here: http://forum.xda-developers.com/showthread.php?t=1117990
Click to expand...
Click to collapse
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
elpromo01 said:
ok so i installed GB bootloader following the instructiones as shown in the forum, went ahead an tried to flash Slimbean 4.2.2 build 8 and the same thing happened my phone is stock at the boot screen only different is that instead of the vibrant screen im getting a semaphore screen (i guess is because of the gb bootloader) anyway flashed back to stock using Odin and im back where i started so it doesnt seem to be a bootloader related issue
thanks anyway
Click to expand...
Click to collapse
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Flash the rom again instead of going back to stock when it hangs. You have to flash JB roms twice most of the time when you are on stock 2.1, the first flash simply upgrades your recovery mode. Pull the battery after the first flash and boot back into recovery (should be blue now) and flash the rom again.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
elpromo01 said:
i just fixed, i tried to flash CM10.1 and it crashed during the process only this time instead of getting stuck on the Vibrant screen it rebooted back into the recovery mode wich is now blue and version 6.0.2.1 intead of 2.5.1.2.
im running CM10.1 right now and so far everything looks good :laugh: only thing different now is that it say Galaxy S GT-I9000 and is the t959, doesnt really bother me as long as the phone behaves im just sayin
thanks to everyone that took their time to help, never give up on a Vibrant cause it will never give up on you :good:
Click to expand...
Click to collapse
Glad you figured it out. Just so you you know, your phone says GT-I9000 because you flashed gingerbread bootloaders. They provide better button combinations to recovery and download modes, much easier than stock combos.
Sent from my SGH-T959 using Tapatalk 2
Good to know, thanks!!
Sent from my SGH-T959 using xda app-developers app

Categories

Resources