[HelP!!] Boot loop LG only not the animation - Optimus One, P500, V General

so im stuck in boot loop of the lg (the lg that comes when u first open your phone not the "animation" ) ive tryied to put clockworkmod 0.5 instead of thunderg ...and thats the end of it ... how can i revive it?
i cant enstablish an usb connection :|

Emergency mode and flash a KDZ.

how do i enter in emergency mode? it dose this : it powers up ...it displays the LG logo (just the lg logo like its drawn on the back of the phone and thats it ! )and then shuts down....like when hes out of juice under 2 %....and i cant jump over that
l.e it dosent enter in emergency mode ( vol down + power)

http://forum.xda-developers.com/showthread.php?t=883314

ive tried all that...the main problem is i dont know how to force the pc to recognise the phone..

charris said:
ive tried all that...the main problem is i dont know how to force the pc to recognise the phone..
Click to expand...
Click to collapse
If you can get in emergency mode but the app doesn't recognise the phone, you've most likely bricked your phone.
Try the shaking tip or reinstalling the drivers or something.

Install the USB drivers that come with the LG Air Suite and LG Update Tool.

i cant get pass by the lg logo ...thats it...it dies there and the pc dosent recognise it...when i plug it into the usb it keeps looping ..
so the main thing is why dosent it starts ...ive only killed the custom recovery ...i had void installed...so why?

Try holding Home + Vol. Down + Power. This should do a factory reset / boot custom recovery.

Ianis G. Vasilev said:
Try holding Home + Vol. Down + Power. This should do a factory reset / boot custom recovery.
Click to expand...
Click to collapse
ive tried ...that and to enter in eemergency mode and it dosent...i need to factory reset the custom recovery

Emergency mode activateddd!!! Omfg ima winner!!
so how do i factory reset the custom recovery
le and yes the shake thing + all the keys pressed ..i dont know witch one ive pressed worked !

The only thing you can do from emergency mode is use the KDZ Updater or try using the LG Update Tool.
Set the KDZ Updater to EMERGENCY and CS_EMERGENCY mode. Try also changing the phone type, there are several.
Sometimes the Updater doesn't recognize your device. You should try again.
Other options include buying a dongle box(SpiderMan Box, Vygis Box, Infinity Box...).
And off couse - LG Service. You could always blame LG if they don't have proof that you messed your phone yourself...

i`m home...and it still dosent see the phone..:|

What do you mean by "I'm home?"
If you have managed to restore/reinstall android simply install LG Air Suite IV.
If you haven't, install only the drivers.

i mean i was away....and im at emergency mode...and i it still dosent sees the phone
ive downloaded the drivers...installed them and nothing
still dosent see the phone....adb shell says no device found kdz same
le ...so i tried to make it back to emergency mode...it dose see the little brat..it just installed 3 usb drivers named LGE ...but kdz still is useless

Try a different USB port or plug in another device in this one to see if it works.
Also see if the phone charges when you plug it in the charger - if not, buy another cable.

so the pc installs the drivers but kdz says that the port = -1 and the phone was not found
[R&D Test Tools Log File]
22:53:41 : Launching SW update
22:53:41 : Unpacking KDZ
22:53:44 : KDZ file extraced
22:53:45 : Files were extracted.
22:53:45 : LGMobileDL Load.
22:53:45 : Port = -1
22:53:45 : Connecting to phone
22:53:45 : PHONE WAS NOT FOUND!
22:53:47 : ===FINISHED===
after playing some images in my head like smashing my phone torching it and then removeing his battery and when the sound of usb plugged in hitted the launch button in cdma emergency .. it kinda writes..

can you please give me a link to the stock rom for p500 romania? i got bricked today trying to flash cwm3

AVDRBK VDR/VODAFONE(ROMANIA) http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AVDRBK/V10b_00/V10B_00.kdz

still stuck even after kdz
can anyone help me.
i had done all the things regarding flashing kdz but the problem still remains,
eventhough the updater kdz says "status complete" and "=finished=", my phone still boot loop in android logo. i really need help
ty in advance

Related

[Q] P500 stuck in emergency mode, not detected by computer

I have tried the LG update software, nothing detects the phone, it instantly boots into emergency mode hoping I have not bricked the phone. This all happend while trying to downgrade the baseband and it just stopped at about 25% and stayed there for ten minutes, I attempted to reflash and the same failure happend, I then rebooted the phone and it has been in emergency mode since then with no detection at all.
did you flash a custom rom? or were you using the stock lg rom
try use other usb port ???
T_D_H said:
I have tried the LG update software, nothing detects the phone, it instantly boots into emergency mode hoping I have not bricked the phone. This all happend while trying to downgrade the baseband and it just stopped at about 25% and stayed there for ten minutes, I attempted to reflash and the same failure happend, I then rebooted the phone and it has been in emergency mode since then with no detection at all.
Click to expand...
Click to collapse
if using lgmdp the latest method or via kdz these link can help
http://forum.xda-developers.com/showthread.php?t=1038338
http://forum.xda-developers.com/showthread.php?t=883314
http://forum.xda-developers.com/showthread.php?t=1060121
check downgrading ur phone detail just flash ur desired android version.
if sucessfull via lgmdp(latest method) search threads for lgmdp method or use kdz which solved all probs.
Try to enter emergency mode with vol up + back key + power button (not just power button) and then connect it to usb.
I have tried the kdz(after emergency mode issue) and lgmpd method already as it was required for the baseband flash the first time, I have clockworkmod recovery installed and cannot boot to that, was downgrading the baseband so I could go back to using CM7, as we speak I tried using CDMA setting in KDZ and I seem to have gotten a response, will update with whatever method works to unbrick
well after using KDZ method in CDMA mode, with shaking the phone, crossing fingers toes arms legs and eyes, I flashed riginal firmware and unbricked my phone, thank you for the links, after about 8 different pages I managed to get it working thank you all
T_D_H said:
well after using KDZ method in CDMA mode, with shaking the phone, crossing fingers toes arms legs and eyes, I flashed riginal firmware and unbricked my phone, thank you for the links, after about 8 different pages I managed to get it working thank you all
Click to expand...
Click to collapse
glad u solved it I knew it will . enjoy flashing!
i was writing iho recovery and my phone stuck at lg logo, runing kdz, in emergency but pc can't find my phone...
afrey said:
i was writing iho recovery and my phone stuck at lg logo, runing kdz, in emergency but pc can't find my phone...
Click to expand...
Click to collapse
try 3 button combo home+vol down + power and see if it comes out of lg logo and boot
I'm stuck in the Emergency Mode!! yellow screen with my P500 too.
I tried with KDZ Updater in all possible combinations and got the error "Upgrade error WParam:100. LParam:502" at each attempt.
I tried these rom's: V10A_00.kdz, V10B_00.kdz, V10E_00.kdz, V20B_00.kdz.
With LGMDP THUNDER v1.5, but I run into this error, after pressing the Start (write ROM button): Error! Partition Table.
Help!
I opened a dedicated topic here http://forum.xda-developers.com/showthread.php?p=17307504#post17307504.
Try to skake it 10 20 times.
I know it sounds weird but it did for me.
Sent from my LG-P500 using XDA App
Hello, my P500 is not detected any more by computer!
I looked over the internet and it seems a hardware problem. The phone is charging but cannot be detected as hardware. Unfortunately to resend it to warranty I must first remove Superuser because I rooted my phone. Is there any way to install the firmware once again from the sd card? I cannot make it through a computer because as I said before is not detected. I have custom recovery installed: ClockWorkMode 5.0.2.0. I looked over this forum and found some custom Recovery Zips, but I don't know how to use it. Any idea please? I must get rid of root access so I can return my phone to warranty! Thanks!

lg optimus hub bricked/stuck

Okay long story short, I attempted to install transparent cm7.2 status bar and phone bricked (fastboot). I fixed it and installed other phone model's cwm with windows cmd command (stupid, I know). After this I'm always stuck at lg screen. Can't get into recovery either. Lg update tool does not find the phone, neither does cmd.exe. I sometimes get the ''colored snow screen'' or whatever I should call it. But it doesnt change the fact that the phone can't be recognized by anything.
What should I do? I ran out of ideas. I can't turn the phone in any mode, it always starts with the lg screen.
bump
bump. dammit, am i really screwed? I managed to get a notification about new hardware installing yesterday but none of the driver stuff I had worked so I left it the way it was and did not install anything afterwards.
I've just entered Emergency Mode!! with volume up+down+plugging into usb. Some driver got installed but there's still no lg stuff in device manager
Completely bricked.
Doesn't turn on at all.
Okay, any excuse I can tell the phone suppliers?
cek recovery
whether you have flash before CWM recovery?
if you might have tried to go to CWM pressing the power + vol down
if you managed to do as they pleased
The phone is a brick. It doesn't turn on in any way. Completely dead. If I could get to CWM I wouldn't be asking for a story to tell the phone suppliers xD
You can use KDZ Updater and also download original lg firmware. All can be found here in this forum.
LG Optimus Hub problem
Hi
I cant turn my LG optimus hub on I tried to fix it with KDZ (lg software) and then it stuck on 1 file and then it turned off and now i cant turn on! can someone help!!!!
I'm also facing same problem ->"stuck at LG logo"
I can only enter in Emergency mode but nothing else.
can anyone tell me how to use KDZ updater in this situation??
Is there anything I can do to revive my phone from Emergency mode???
HELP PLZZZ.....

Problem during downgrading baseband

Something went wrong with my phone (LG P500) !
I had 2.2 stock firmware and then installed custom recovery with CM7 rom, and when I tried to upgrade the baseband, it stucked and phone freezed in Emergency Mode screen. Then I removed the USB cable and reinserted the battery. After that, the phone is not responding!
I tried to enter in emergency mode and flash with LGMDP, LGMobile Support Tool and KDZ Updater, but nothing happens. The phone don't responds again.
I need your help!
do you mea nyour phone won't turn on?
bondzi said:
Something went wrong with my phone (LG P500) !
I had 2.2 stock firmware and then installed custom recovery with CM7 rom, and when I tried to upgrade the baseband, it stucked and phone freezed in Emergency Mode screen. Then I removed the USB cable and reinserted the battery. After that, the phone is not responding!
I tried to enter in emergency mode and flash with LGMDP, LGMobile Support Tool and KDZ Updater, but nothing happens. The phone don't responds again.
I need your help!
Click to expand...
Click to collapse
> hold power button + home button.. if ur phone still enters fast boot then it still had a chance to ne fix. Try it 1st.
Sent from my LG-P500 using xda app-developers app
The phone won't turn on.
I tried almost every combination for entering fastboot, emergency mode and hard format.
And I still don't know what to do with my phone
bondzi said:
The phone won't turn on.
I tried almost every combination for entering fastboot, emergency mode and hard format.
And I still don't know what to do with my phone
Click to expand...
Click to collapse
to be honest i dont understand what you do to phone but im sorry to tell you if your phone dont turn on theres nothing you can exept take to garanty,tell them that you where using froyo and when you cont to lg suite it said you have a update to GB2.3.3 and you use lg software to upgrade phone and on the midle of update phone turns off and nver turn back on they fix it for you positive on that....

Help anything to get my lg p769 working

So i post a lot of threads getting help of unblocking my phone, but the replies that is given won't work
[Heres all the info what i did with this phone]
My phone is an Lg p769 T-mobile(Bricked)V20H
All i did with this phone is rooted it, to get root access to moving files.
I have a Locked Boot loader.
I Accidentally installed chain fire 3d without knowing its not compatible with JellyBean.
So my problem is I'm stuck in boot loop.
when i turn it on its stuck on Lg logo. (No Security Error)
I am able to get into S/w upgrade mode but not Recovery mode.
My PC (Windows 7 Professional) won't detect my phone when in its in S/w upgrade mode. But it shows as LG modem
Device driver software shows my phone when connected as s/w upgrade mode as Unidentified Device - Unplugged
I installed the my phone driver from the Lg websites even the latest drivers 3.8
But still its not connected
I tried following guides to offline Flashing with lg mobile support tool to flash stock rom to my phone. but still my phone won't get detected
getting stuck on 15% when upgrading.
Adb also dosent detect my phone
all i need is to get anything to get my phone working even if i have to wipe everything.
i provided images to see what I'm getting when my phone is in s/w upgrade mode and connected to my pc
Sorry I'm for my bad english
Hey bro. Same deal happened with me. I got a bootloop with a root app. How i got it to work was through sw upgrade mode. You hold vol. up only, while plugging it in to your pc. Then you can do a recovery update, and it should work then. Message me if this doesn't work. Before this though, try a hard reset/wipe. That will wipe your phone, but so will the other solution i said. Hard wipe is vol -, power, home. Release after lg logo pops up.
Sent from my LG-P769 using XDA Free mobile app

[Q] LG P760 [Optimus L9] Stuck on LG screen/do not turn on.

Hello Yesterday i have upgraded my phone ROM.
First have unlocked the bootloader.
Next, followed this video to upgrade to Android 5.0 AOPS build:30-11-2014 by Artas.
It was great and useable while i did not installed a new CWM.. (CWM 6.0.4.5 Touch by Pollos).. after that, the phone is stucked at "LG" logo and while i charge random times reboot..
Earsed all with fastboot, and now the phone is not turn on while i charge or try to turn it on..
I have got this problem earlier with an other android version (sercurity error) and the S/W update was good.
Like this post:
mstation86 said:
Hello
is there any chance a kind person can help me with this dead stick?
a few information about this phone:
- as far as i was told, the phone died after an update
- when i plug the phone to the charger nothing appears on screen
- when i power the phone nothing happens
- when i volume up + power the phone nothing happen, same with volume down + power and volume up+down+power
i have installed the lg tools and using the imei downloaded a 600+MB package which should be the restore image of the phone but when the procedure starts to flash the image it gets stuck at 4% trying to connect to phone without any luck
if anyone has some ideas to give i would be very happy to try them!
Click to expand...
Click to collapse
Now.:
When i try do S/W upgrade with the "LG Mobile Support Tool", it stops at 4% and the phone disconnect itself from the PC.. the installer goes (without the phone plugged in) 4--->8% and if i turn again my phone to download mode, go to 15%.
At 15% again disconnect and the installer say "Error, try to unplug USB and remove battery and try again......"
I have tryed KDZ offline flashing but it is force quit when i click "Start"..
Tryed:
Official support tool - Say "You have already installed the latest version (V20H). If i try to "Upgrade errors fix", it stop at 15% as i said..
Fastboot - earse boot, system etc.. after that again upgrade, but stop at 15% and phone turn off.
LG Flash tool - these 90% exit with some error before i can start anything..
I hope you can help and understand my bad english:'D
Did you invoke "Download Mode"? If i remember, this requires switching the phone off, and attaching it to usb while keeping volume up or down pressed, and will show a special screen, if successful.
Download mode is even more basic than fastboot or adb, and the final line of defense, before throwing the phone away.
All LG tools require the LG usb drivers. These at least no longer recognize the phone with Artas' CM11, except for when in download mode. Then Windows should auto-install a virtual COM port. For ADB and Fastboot you need different drivers then, like those from the Google SDK. But with these the LG tools won't work, not even the sync suite.

Categories

Resources