Sorry if this is a noob question but when i read around i thought that the S2 could play mkv's with the x264 codec as it has a h264 decoder. But When i play this file it doesnt have the stock option to play and MX player cannot do H/W decoding (has sound though) and S/W Decoding is horribly slow. I use the FoxHound 2.0 ROM. Any way i can play this or optimise my phone?
Code:
General
Unique ID : 172456582246348739115322420056334029551 (0x81BDEDF9509858F4A223E4E6640C52EF)
Complete name : E:\Random Muusik\Kyarypamyupamyu - CANDY CANDY.720p.HDTV.x264-UAC.mkv
Format : Matroska
Format version : Version 2
File size : 204 MiB
Duration : 3mn 55s
Overall bit rate : 7 277 Kbps
Movie name : きゃりーぱみゅぱみゅ - CANDY CANDY.720p.HDTV.x264-UAC
Encoded date : UTC 2012-03-14 13:51:32
Writing application : mkvmerge v5.4.0 ('Piper') built on Mar 10 2012 13:34:39
Writing library : libebml v1.2.3 + libmatroska v1.3.0
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 8 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 3mn 55s
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 10 bits
Scan type : Progressive
Title : h264
Writing library : x264 core 120 r2164+656 2ff844c
Encoding settings : cabac=1 / ref=8 / deblock=1:0:0 / analyse=0x3:0x133 / me=umh / subme=11 / psy=1 / fade_compensate=0.00 / psy_rd=0.53:0.16 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=0 / chroma_qp_offset=-3 / threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / fgo=0 / bframes=6 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=80 / rc=crf / mbtree=1 / crf=16.0 / qcomp=0.71 / qpmin=1 / qpmax=81 / qpstep=4 / ip_ratio=1.40 / aq=1:0.95
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : A_AAC
Duration : 3mn 55s
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Delay relative to video : 14ms
Title : AAC
Language : Japanese
Have you tried dice player?
Dice player says it cannot playback the file... Is there something wrong with my phone?
You should be able to play mkv files, perhaps something is wrong with that particular file you are playing? Did you try with some other files..?
Its fine on my pc. And the phone is fine with mp4 and 3gp. What should I do specifically to troubleshoot the problem?
Try a number of different players . Its the format of the file not your phone at fault .
jje
But its a mkv? I dont see wheres the problem...
Is it because its using Hi10 bit encoding?
Renren1403 said:
But its a mkv? I dont see wheres the problem...
Is it because its using Hi10 bit encoding?
Click to expand...
Click to collapse
Goggle codecs and you may understand the vast differences and multiple formats of video files . No player can play every single format even if the container is playable .
Check the SGS 2 video specifications for playable formats .
To put it bluntly the format of that files is not playable by SGS2 stock music player a different format MKV file may be playable .
jje
JJEgan said:
Goggle codecs and you may understand the vast differences and multiple formats of video files . No player can play every single format even if the container is playable .
Check the SGS 2 video specifications for playable formats .
To put it bluntly the format of that files is not playable by SGS2 stock music player a different format MKV file may be playable .
jje
Click to expand...
Click to collapse
If you look at the media info though it uses x264/h264 and AAC which i read should be playable along with the container MKV. Or is there something in there that can't be played?
Is anyone able to tell me what it is so i can avoid putting stuff like it on my phone to play?
Hi10 bit is a rather "new" and "unknown" compression, so there you have your problem. I can't even play those on my computer. If you're able to, download another version. If not, wait for a player to support the compression system.
Is hi10 something that must be decoded software or hardware wise?
Renren1403 said:
Is hi10 something that must be decoded software or hardware wise?
Click to expand...
Click to collapse
If it's too new (within the timeframe the S2 was developed), it won't have hardware support to decode. So you will have to use software or re-encode the video in Handbrake to something that you can decode with hardware support.
Thanks for the information.
In your opinion has S/W decodign ever been bad for you? Or slow for the S2?
Renren1403 said:
Thanks for the information.
In your opinion has S/W decodign ever been bad for you? Or slow for the S2?
Click to expand...
Click to collapse
I have no issues playing an mp4-AVC 720p video in software using MoboPlayer.
Thanks guess ill wait for a hi10 player !
Magicsee C300 Pro DVB-S2/T2/C
Magicsee C300 DVB-S2/T2/C - HERE
Official site : http://www.magicsees.com/prod_view.aspx?TypeId=66&Id=189&FId=t3:66:3
Official sale to aliexpress : HERE
Parameter :
CPU : Amlogic S912 Octa core ARM Cortex-A53
GPU : ARM Mali-T820MP3
3D Graphics : OpenGL ES 1.1/2.0 and Open VG 1.1 support
Video : UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding, supports H.264
RAM : DDRIII 2GB
ROM : eMMC Flash 16GB
WiFi : Built in 2.4G WiFi Support IEEE 802.11 b/g/n/ac
Blutooth : Bluetooth 4.1
IR : Infra Remote control
LED Indicator : Power ON :blue; Standby :Red
I/O HDMI : 4K/2K HDMI2.0
4*USB HOST : 4 High speed USB 2.0,support U DISK and USB HDD
1*TF CARD : Micro TF Card (Maximum support 32GB)
1*AV : AV output
1*SPDIF : Audio output
1*RJ45 : 10M/100M
Power : DC Adapter ( 12V/1.5A)
DVB-S2 : DVB-S2 system standard：ETS 302 307
Symbol Rates: QPSK,8PSK
Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
Symbol Rates: 1- 55 Msps
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE F
DVB-T2 : DVB-T2 system standard：ETSIEN 302 755
Support MPLP
Demodulation: QPSK,16QAM,64QAM or 256QAM
Forward error correction rate 1/2,2/3,3/4,3/5,5/6
Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
Bandwith: 6/7/8MHz
Input Frange range:54--860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE, female
Accessories Adapter
Gift Box
IR remote control
HDMI Cable
User Manual
OS : Android 7.1.2
Decoder : HD MPEG1/2/4,H.265/HEVC , HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10
Video : AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
Music : MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
Photo : HD JPEG/BMP/GIF/PNG/TIFF
Support Language : Chinese , English ,Germany ,Japanese, Korea etc. 24 languages
WiFi Hotpoint : Support
Mouse/ Keyboard Support mouse and keyboard via USB
Support 2.4G wireless mouse and keyboard via 2.4G USB dongle
Others : support DLNA \AirPlay \Google TV Remote \LAN \Miracast \3D moive
________________________________________________
Factory firmware from C300 Pro from 09.02.2018 : https://drive.google.com/file/d/11QQuP4C_nrOMNODeJlVVuQ1hSfC-G7S8/view
Factory firmware from C300 Pro from 21.05.2018 :https://mega.nz/#!I0A2WYyQ!so3sq1t8WTNRrtHHjGMhF2OrnlhNjLkV9lRCW9c1YtM
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "6699"
________________________________________________
Custom firmwareAll that you do, you do only at your own risk (I must warn you)
Installation:
Copy from the archive 3 files per sd card Malaysk_C300Pro-ota-20180318.zip, recovery.img and u-boot.bin.sd.bin.
Insert the card into the deactivated prefix. Click on the big blue button (which is located at the top of the console) and plug the power into the console. After 10 seconds, release this button and you are in recovery. Here you need to move through the menu or USB keyboard or aero (the native panel does not work there) Select the 4th item, then with the SD Card and there you select the file Malaysk_C300Pro-ota-20180318.zip and the flashing starts. How to end, go down the menu on Wipe Data and apply it.
What's added, changed, deleted:
Base - factory firmware for C300 Pro from April , 2018 Android 7.1.2
Built-in Root access- SuperSU (hidden)
Built-in ViperFX (turn on there amplification of sound to a maximum)
Replaced by Launcher, in my opinion more convenient.
The volume bar is changed and increased to 30 volume values.
Added to the basic settings - Weather and Time Settings for display in the DTV application.
I recommend setting there for Time Settings: Location - Left and Date - Do not show. And set the Weather - to allow Location - by all sources.
Added support for Picons in the DTV application. In the archive along with the firmware there is an archive Picons_Copy_to_internal_memory_ (sdcard) .rar, you need to unzip it and copy the whole Picons folder to the root of the internal memory of the device (sdcard). If you do not show what kind of picos on certain channels, then you need to put an image of this kind in this folder: for example the channel name in InfoBar is displayed as the First Regional, then the image name should be exactly the same, including spaces and case and will be First Regional.png.
Added support for Live wallpapers and just wallpapers. Located in Settings - Screen - Wallpaper.
The InfoBar's display time has been increased and it has been redone.
Added Samba support (for displaying the set-top box in the Network environment on desktop computers)
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "1111"
Download Version 1.5 of April 26, 2018 for the C300 Pro: https://yadi.sk/d/3uosu2wS3WeZcd
Download Version 1.8 of May 15, 2018 for the C300 Pro: https://yadi.sk/d/UbuzEHil3WeZaZ
Download Version 2.0 of May 22, 2018 for the C300 Pro: https://yadi.sk/d/fTvT23d43WeZWa
+ auto frame rate
+ Support for many gamepads
+ amended CCcam
Download Version 2.1 of of 06 June, 2018 for the C300 Pro: https://yadi.sk/d/TPRBFS4Z3XFyxA
+AFR (Can be turned off in TVSettings-Display -Resolution screen)
+Changed channel list (by OK button)
Download Version 2.2 of of 22 June, 2018 for the C300 Pro: https://yadi.sk/d/IBtVOAJf3YGLJi
+The EPG fix in the channel list for DVB-T2
+Fixing Clock Settings
Download Version 2.4 of of 24 July, 2018 for the C300 Pro: https://yadi.sk/d/LYHUP1zA3ZWeNn
+ Optimizing the channel list
+ Provider ID in the Channel Editor and Favorites
+ Other fixes and additions
After installing version 2.5, you must reset to factory settings in the DTV application and scan the channels again!
Download Version 2.5 of August 28, 2018 for the C300 Pro: https://yadi.sk/d/znvuqevj3aduCv
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then "Donate to Me"
Setup video - https://www.youtube.com/watch?v=APoUer2dIHk
Video on setting up ViperFX for normal sound (look from the site 1 minute 50 seconds) - https://www.youtube.com/watch?v=IrkWVmrD5qQ
Magicsee C300 DVB-S2/T2/C
Official site : http://www.magicsees.com/prod_view.aspx?TypeId=66&Id=182&FId=t3:66:3
Official sale to aliexpress : HERE
Parameter :
CPU : Amlogic S905D Quad-core 64-bit ARM® ™-A53
GPU : Penta-core ARM® Mali™-450
3D Graphics : OpenGL ES 1.1/2.0 and Open VG 1.1 support
Video : UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding, supports H.264
RAM : DDRIII 2GB
ROM : eMMC Flash 16GB
WiFi : Built in 2.4G WiFi Support IEEE 802.11 b/g/n/ac
Blutooth : Bluetooth 4.1
IR : Infra Remote control
LED Indicator : Power ON :blue; Standby :Red
I/O HDMI : 4K/2K HDMI2.0
4*USB HOST : 4 High speed USB 2.0,support U DISK and USB HDD
1*TF CARD : Micro TF Card (Maximum support 32GB)
1*AV : AV output
1*SPDIF : Audio output
1*RJ45 : 10M/100M
Power : DC Adapter ( 12V/1.5A)
DVB-S2 : DVB-S2 system standard：ETS 302 307
Symbol Rates: QPSK,8PSK
Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
Symbol Rates: 1- 55 Msps
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE F
DVB-T2 : DVB-T2 system standard：ETSIEN 302 755
Support MPLP
Demodulation: QPSK,16QAM,64QAM or 256QAM
Forward error correction rate 1/2,2/3,3/4,3/5,5/6
Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
Bandwith: 6/7/8MHz
Input Frange range:54--860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE, female
Accessories Adapter
Gift Box
IR remote control
HDMI Cable
User Manual
OS : Android 7.1.2
Decoder : HD MPEG1/2/4,H.265/HEVC , HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10
Video : AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
Music : MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
Photo : HD JPEG/BMP/GIF/PNG/TIFF
Support Language : Chinese , English ,Germany ,Japanese, Korea etc. 24 languages
WiFi Hotpoint : Support
Mouse/ Keyboard Support mouse and keyboard via USB
Support 2.4G wireless mouse and keyboard via 2.4G USB dongle
Others : support DLNA \AirPlay \Google TV Remote \LAN \Miracast \3D moive
________________________________________________
Factory firmware from C300 from 21.05.2018 : https://mega.nz/#!Jkw2yTAB!tYdR9NaZNQlkiMamtu3ADFXIFdc06NGpYjR_R0vioR4
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "6699"
________________________________________________
Custom firmwareAll that you do, you do only at your own risk (I must warn you)
Installation:
Copy from the archive 3 files per sd card Malaysk_C300-ota-20180523.zip, recovery.img and u-boot.bin.sd.bin.
Insert the card into the deactivated prefix. Click on the big blue button (which is located at the top of the console) and plug the power into the console. After 10 seconds, release this button and you are in recovery. Here you need to move through the menu or USB keyboard or aero (the native panel does not work there) Select the 4th item, then with the SD Card and there you select the file Malaysk_C300-ota-20180522.zip and the flashing starts. How to end, go down the menu on Wipe Data and apply it.
What's added, changed, deleted:
Base - factory firmware for C300 from May 22 Android 7.1.2
Built-in Root access- SuperSU (hidden)
Built-in ViperFX (turn on there amplification of sound to a maximum)
Replaced by Launcher, in my opinion more convenient.
The volume bar is changed and increased to 30 volume values.
Added to the basic settings - Weather and Time Settings for display in the DTV application.
I recommend setting there for Time Settings: Location - Left and Date - Do not show. And set the Weather - to allow Location - by all sources.
Added support for Picons in the DTV application. In the archive along with the firmware there is an archive Picons_Copy_to_internal_memory_ (sdcard) .rar, you need to unzip it and copy the whole Picons folder to the root of the internal memory of the device (sdcard). If you do not show what kind of picos on certain channels, then you need to put an image of this kind in this folder: for example the channel name in InfoBar is displayed as the First Regional, then the image name should be exactly the same, including spaces and case and will be First Regional.png.
Added support for Live wallpapers and just wallpapers. Located in Settings - Screen - Wallpaper.
The InfoBar's display time has been increased and it has been redone.
Added Samba support (for displaying the set-top box in the Network environment on desktop computers)
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "1111"
Download Version 2.0 of May 23, 2018 for the C300 : https://yadi.sk/d/P-QSM6ph3WHoWZ
+ auto frame rate
+ Support for many gamepads
+ amended CCcam
Download Version 2.1 of 06 June, 2018 for the C300 : https://yadi.sk/d/ik6fCsjW3XFx8E
+AFR (Can be turned off in TVSettings-Display -Resolution screen)
+Changed channel list (by OK button)
Download Version 2.3 of 22 June, 2018 for the C300 : https://yadi.sk/d/Q2dzRnDH3YGLUQ
+The EPG fix in the channel list for DVB-T2
+Fixing Clock Settings
Download Version 2.4 of of 24 July, 2018 for the C300: https://yadi.sk/d/8mGXsXCi3ZWj6C
+ Optimizing the channel list
+ Provider ID in the Channel Editor and Favorites
+ Other fixes and additions
After installing version 2.5, you must reset to factory settings in the DTV application and scan the channels again!
Download Version 2.5 of August 25, 2018 for the C300: https://yadi.sk/d/oxzu-oY43aYju6
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then "Donate to Me"
Setup video - https://www.youtube.com/watch?v=APoUer2dIHk
Video on setting up ViperFX for normal sound (look from the site 1 minute 50 seconds) - https://www.youtube.com/watch?v=IrkWVmrD5qQ
Great firmware
very good just need someone who masters these issues to repair the sound, AC3 that does not work with cccam, on the hd channels of astra 19.2.
keinspeiser said:
AC3 that does not work with cccam, on the hd channels of astra 19.2.
Click to expand...
Click to collapse
Perhaps, someone with this problem will record satellite canal,with sound ac3, on usb disk (pvr). The record is a little more than 5 minutes. Press the info button on the remote control. To determine the channel during recording. And send this file to the cloud. For download. Link to this record is necessary for the manufacturer. Publish the link here. I'll send the file to Magicsee.
video
temamix said:
Perhaps, someone with this problem will record satellite canal,with sound ac3, on usb disk (pvr). The record is a little more than 5 minutes. Press the info button on the remote control. To determine the channel during recording. And send this file to the cloud. For download. Link to this record is necessary for the manufacturer. Publish the link here. I'll send the file to Magicsee.
Click to expand...
Click to collapse
Hi, being new to the forum will not let me post the video I passed to fellow Malaysk to publish it.
keinspeiser said:
Hi, being new to the forum will not let me post the video I passed to fellow Malaysk to publish it.
Click to expand...
Click to collapse
figured out. Thank you for the video
AC3
temamix said:
figured out. Thank you for the video
Click to expand...
Click to collapse
hello, ac3 sound already on hd channels in Spain, the Chinese fixed the firmware, now wait for the new version of Malaysk to implement it, greetings.
chanel editor
there is some channel editor for this box?
added Version 1.8 of May 15, 2018
added Factory firmware from C300 Pro from 21.05.2018 and Mod Version 2.0 of May 22, 2018 for the C300 Pro
шаринг
где лежат файлы настройки эмулятора в вашей последней прошивке?С300 не про.Хочу добавить кое -что в dvbapi и в биссы....
hello, with the latest firmware the channel change works better, but I have noticed that stops occur in the video as it is de-synchronized, and also the colors in the image leave artifacts, I do not know what it can be if it is due to heating the s912 is set at 87 degrees
Is there any possibility to load OpenPLI or OpenATV to these tuners?
keinspeiser said:
hello, with the latest firmware the channel change works better, but I have noticed that stops occur in the video as it is de-synchronized, and also the colors in the image leave artifacts, I do not know what it can be if it is due to heating the s912 is set at 87 degrees
Click to expand...
Click to collapse
Had the same trouble. EASY FIX: thermal swith 60°C and 5V 25mm fan solved the issue.
Hello
l have got your product and have problem
l don't know what exactly l have to type in, could someone help me out, please
here is my cccam
C: egygold.com 15002 xint,,,,,626 67,,,2
first settings
Port : C: egygold.com 15002
Username: xint,,,,,626
Password: 67,,,2
second settings
Port :egygold.com15002
Username: xint,,,,,626
Password: 67,,,2
l tried both ways and no success
regards
like this C: host port user password
sebek73 said:
Hello
l have got your product and have problem
l don't know what exactly l have to type in, could someone help me out, please
here is my cccam
C: egygold.com 15002 xint,,,,,626 67,,,2
first settings
Port : C: egygold.com 15002
Username: xint,,,,,626
Password: 67,,,2
second settings
Port :egygold.com15002
Username: xint,,,,,626
Password: 67,,,2
l tried both ways and no success
regards
Click to expand...
Click to collapse
Version 2.1 of 05 June, 2018 for the C300
Flines
Malaysk said:
Magicsee C300 DVB-S2/T2/C
Official site : http://www.magicsees.com/prod_view.aspx?TypeId=66&Id=182&FId=t3:66:3
Official sale to aliexpress : HERE
Parameter :
CPU : Amlogic S905D Quad-core 64-bit ARM® ™-A53
GPU : Penta-core ARM® Mali™-450
3D Graphics : OpenGL ES 1.1/2.0 and Open VG 1.1 support
Video : UHD 4K 60fps HW decoding, supports multiple formats including H.265 10-bit, H.264 and AVS+FHD 1080p 60fps HW encoding, supports H.264
RAM : DDRIII 2GB
ROM : eMMC Flash 16GB
WiFi : Built in 2.4G WiFi Support IEEE 802.11 b/g/n/ac
Blutooth : Bluetooth 4.1
IR : Infra Remote control
LED Indicator : Power ON :blue; Standby :Red
I/O HDMI : 4K/2K HDMI2.0
4*USB HOST : 4 High speed USB 2.0,support U DISK and USB HDD
1*TF CARD : Micro TF Card (Maximum support 32GB)
1*AV : AV output
1*SPDIF : Audio output
1*RJ45 : 10M/100M
Power : DC Adapter ( 12V/1.5A)
DVB-S2 : DVB-S2 system standard：ETS 302 307
Symbol Rates: QPSK,8PSK
Forward error correction rate 1/4,1/3,2/5,3/5,2/3,3/4,4/5,5/6,8/9,9/10
Carrier frequency acquisition range: ±5MHz for symbol rates above 3 Msps and ±3MHz for the remaining symbol rates
Roll-off factors for pulse shaping: 0.2, 0.25 and 0.35
Symbol Rates: 1- 55 Msps
Code Rates: 1/2, 2/3, 3/4, 5/6, 7/8
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE F
DVB-T2 : DVB-T2 system standard：ETSIEN 302 755
Support MPLP
Demodulation: QPSK,16QAM,64QAM or 256QAM
Forward error correction rate 1/2,2/3,3/4,3/5,5/6
Guard interval :1/4,19/256,1/8,19/128,1/16,1/32,1/128
Bandwith: 6/7/8MHz
Input Frange range:54--860MHz Input Impedance:75 Ω
Input Signal level: -84 dBm to 0 dBm (average power)
ANT. Connector:IEC TYPE, female
Accessories Adapter
Gift Box
IR remote control
HDMI Cable
User Manual
OS : Android 7.1.2
Decoder : HD MPEG1/2/4,H.265/HEVC , HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10
Video : AVI/RM/RMVB/TS/VOB/MKV/MOV/ISO/WMV/ASF/FLV/DAT/MPG/MPEG
Music : MP3/WMA/AAC/WAV/OGG/DDP/TrueHD/HD/FLAC/APE
Photo : HD JPEG/BMP/GIF/PNG/TIFF
Support Language : Chinese , English ,Germany ,Japanese, Korea etc. 24 languages
WiFi Hotpoint : Support
Mouse/ Keyboard Support mouse and keyboard via USB
Support 2.4G wireless mouse and keyboard via 2.4G USB dongle
Others : support DLNA \AirPlay \Google TV Remote \LAN \Miracast \3D moive
________________________________________________
Factory firmware from C300 from 21.05.2018 : https://mega.nz/#!Jkw2yTAB!tYdR9NaZNQlkiMamtu3ADFXIFdc06NGpYjR_R0vioR4
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "6699"
________________________________________________
Custom firmwareAll that you do, you do only at your own risk (I must warn you)
Installation:
Copy from the archive 3 files per sd card Malaysk_C300-ota-20180523.zip, recovery.img and u-boot.bin.sd.bin.
Insert the card into the deactivated prefix. Click on the big blue button (which is located at the top of the console) and plug the power into the console. After 10 seconds, release this button and you are in recovery. Here you need to move through the menu or USB keyboard or aero (the native panel does not work there) Select the 4th item, then with the SD Card and there you select the file Malaysk_C300-ota-20180522.zip and the flashing starts. How to end, go down the menu on Wipe Data and apply it.
What's added, changed, deleted:
Base - factory firmware for C300 from May 22 Android 7.1.2
Built-in Root access- SuperSU (hidden)
Built-in ViperFX (turn on there amplification of sound to a maximum)
Replaced by Launcher, in my opinion more convenient.
The volume bar is changed and increased to 30 volume values.
Added to the basic settings - Weather and Time Settings for display in the DTV application.
I recommend setting there for Time Settings: Location - Left and Date - Do not show. And set the Weather - to allow Location - by all sources.
Added support for Picons in the DTV application. In the archive along with the firmware there is an archive Picons_Copy_to_internal_memory_ (sdcard) .rar, you need to unzip it and copy the whole Picons folder to the root of the internal memory of the device (sdcard). If you do not show what kind of picos on certain channels, then you need to put an image of this kind in this folder: for example the channel name in InfoBar is displayed as the First Regional, then the image name should be exactly the same, including spaces and case and will be First Regional.png.
Added support for Live wallpapers and just wallpapers. Located in Settings - Screen - Wallpaper.
The InfoBar's display time has been increased and it has been redone.
Added Samba support (for displaying the set-top box in the Network environment on desktop computers)
Access to the data CCcam entry menu: Menu - Settings and here enter the numbers "1111"
Download Version 2.0 of May 23, 2018 for the C300 : https://yadi.sk/d/P-QSM6ph3WHoWZ
+ auto frame rate
+ Support for many gamepads
+ amended CCcam
Download Version 2.1 of 05 June, 2018 for the C300 : https://yadi.sk/d/06-MU38g3XAiyL
If you like my firmware and think that I'm wasting a lot of time to improve the firmware, then "Donate to Me"
Setup video - https://www.youtube.com/watch?v=APoUer2dIHk
Video on setting up ViperFX for normal sound (look from the site 1 minute 50 seconds) - https://www.youtube.com/watch?v=IrkWVmrD5qQ
Click to expand...
Click to collapse
Hello,
i've not got tried to install the custom firmware but i'll do in next week. A question, how i can insert the Flines in cccam ?
thanks a lot
mod
sebek73 said:
Hello
l have got your product and have problem
l don't know what exactly l have to type in, could someone help me out, please
here is my cccam
C: egygold.com 15002 xint,,,,,626 67,,,2
first settings
Port : C: egygold.com 15002
Username: xint,,,,,626
Password: 67,,,2
second settings
Port :egygold.com15002
Username: xint,,,,,626
Password: 67,,,2
l tried both ways and no success
regards
Click to expand...
Click to collapse
Ip: egygold.com
Port: 15002
Username: xint ,,,,, 626
Password: 67 ,,, 2
it should be like this
temamix said:
Ip: egygold.com
Port: 15002
Username: xint ,,,,, 626
Password: 67 ,,, 2
it should be like this
Click to expand...
Click to collapse
do you know how to insert the F lines too?