Related
So for some reason my nike WILL NOT flash a rom fully it will always stop at like half way or a random percent..
Does anyone know why/ and or can help me?
try holding the USB cable in the Niki while flashing, or give it a wiggle before flashing to see if charging light stays on, my usb is fuxd! and has failed a couple of times due to bad connectivity. so now i always hold it in firmly whenever flashing.
Thats not the problem.... Every time i flash a rom
For instance If i flash mary's rom..
It will stop at 73% every time.
OR Rome O.s
68% every time...
Like whats going on?
Check your SPL
Try turning off your Tocuh first.... then power it up by pressing <Power> + <Camera> button....
Look at the startup message carefully...
If you still using S-SPL then you have to reflash HardSPL or USPL.... before you are good to go for another flash...
make sure you also download the latest HardSPL or USPL from the forum.... Older SPL sometime cann't sucessfully map all the memory for flashing....
another detail
here is another good flashing guide from our good ol' pal <netrunnerAT>...
http://forum.xda-developers.com/showthread.php?t=409690
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
flash the stock rom
flash thru stock rom by sd card.....don't use radio 2.09...it's complicated as of now....
tmo stuck rom http://conflipper.com/shipped/Leo/RU....08_2_Ship.exe
HD2 DEAD
BladeKnight said:
flash thru stock rom by sd card.....don't use radio 2.09...it's complicated as of now....
Click to expand...
Click to collapse
it doesn't even turn on at all !!! cant go to bootload or anything to turn on
even i fyou took of your battery????????????
so your hd is out
I trie radio 2.09 with tmous 2.10 and with some roms no boot,just stay at white screen htc and with last energy start up but have some bugs
I have the same problem. Was fixed when i flashed back 2.08 radio
Gman25 said:
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
Click to expand...
Click to collapse
Remove the battery for 10-30 mins then try to enter bootloader again, I have experiecned some serious issues around the 2.09 radio also.
Regards
Flashmore
HD2 doesn't turn on(so i can get to bootloader)
vescobg said:
I have the same problem. Was fixed when i flashed back 2.08 radio
Click to expand...
Click to collapse
how did you get it to turn on !!! my HD2 wont turn on the screen is 100% off and even the light that shows when is charging won't turn on !!!
once i've instaled leopard and before that radio 2.09... it booted and worked ok till first reset... when it froze...
i did a hard reset... via key press.... and without reseting it i conected it ti active sync and changed the radio...
HD2 doesn't turn on(so i can get to bootloader)
ccezar2004 said:
once i've instaled leopard and before that radio 2.09... it booted and worked ok till first reset... when it froze...
i did a hard reset... via key press.... and without reseting it i conected it ti active sync and changed the radio...
Click to expand...
Click to collapse
But my HD2 won't turn on at all !!! so i can get to bootloader
Gman25 said:
anyone help!!!
my HD2(Tmobile USA) wont turn on AND WHEN I PLUG IT TO THE WALL CHARGER THE LIGHT DONT TURN ON !!
YES I DID HSPL ALREADY EVERITHING HAS BEEN WORKING UNTIL I DOWNLOAD 2.09.51 Radio
THEN MY HD2 DIE...!
I HAVE DONE THE FOLLOWING
PRESSED RESET ON THE BACK
TOOK OUT THE BATT
ANY IDEAS ?
Click to expand...
Click to collapse
dude 2.09.51 Radio is not for T-Mob Rom thats why not working lol
HD2 doesn't turn on(so i can get to bootloader)
turborider said:
dude 2.09.51 Radio is not for T-Mob Rom thats why not working lol
Click to expand...
Click to collapse
i went to the radio tread for HD2 (i guess Tmobile is special!!)
THATS SO [email protected]#@# UP i hope there is a fix !!! it wont power on at all or the light when is charging
Gman25 said:
THATS SO [email protected]#@# UP i hope there is a fix !!! it wont power on at all or the light when is charging
Click to expand...
Click to collapse
ok i will tell you how to do it,do you have in your device HSPL2 ' HSPL 2.08,if yes then do Task29 wich you can find in this thread http://forum.xda-developers.com/showthread.php?t=644781 and if you dont know how to use it watch this video http://www.youtube.com/watch?v=DtTDuc4V4cU it will show you,then get a Rom of Your Choice,i always recommend plp to Get Dutty's Rom for Base 2.10 T-Mob couse the Radio is Inside cooked,when you installed it do Hardreset and is all done,hope this will help you m8
Try to keep the phone with the battery out as pointed before. Then, in a few hours, try to put the battery back in and see if it starts in bootloader!
HD2 doesn't turn on(so i can get to bootloader)
turborider said:
ok i will tell you how to do it,do you have in your device HSPL2 ' HSPL 2.08,if yes then do Task29 wich you can find in this thread http://forum.xda-developers.com/showthread.php?t=644781 and if you dont know how to use it watch this video http://www.youtube.com/watch?v=DtTDuc4V4cU it will show you,then get a Rom of Your Choice,i always recommend plp to Get Dutty's Rom for Base 2.10 T-Mob couse the Radio is Inside cooked,when you installed it do Hardreset and is all done,hope this will help you m8
Click to expand...
Click to collapse
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Gman25 said:
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Click to expand...
Click to collapse
Maybe it's coincidental damage. It may have actually died when u were flashing or after. Otherwise you only chance is to remove battery press your power on buttons w/out the battery (helps discharge any remaining power) and wait awhile, then try to turn on with just power plugged in and no battery, then with battery. If that doesn't work, then take it back to wherever you bought it and exchange. They won't know the difference. Make sure you remove your stuff from the data card first. Good luck..
Talk to the pros.
I would contact GSLEON3 or jockyw2001 to see if they can help you with your problem.
Gman25 said:
it doesn't even turn on at all !!! cant go to bootload or anything to turn on
Click to expand...
Click to collapse
so no charging happens when you charge the phone?
Gman25 said:
in the video it say i must get connect sync etc. my HD2 is like when you first get it (no life, it won't even show that is charging!!)
my HD2 wont turn on at all so my pc dont see it !!! i have a 100% black screen (no life)
Click to expand...
Click to collapse
i think you had a broken HD2...better return your unit for warranty...and check your sd cards heheheheh..
Hello guys i have a problem with my HTC HD2.
I have searched a lot on this site before posting my problem.
This is what happens and what i did:
The phone doesn't pass the white HTC screen with the RGD letters below.
What i have tried:
HSPL 2.08.HSPL, 1.66, 1.42, 2.08.000
Radio: Leo_RADIO_2.08.50.05, Leo_RADIO_2.15.50.14
Roms: Stock Vodafone (Dutch) rom, Energy rom
Hard reset (vol up +down on startup).
Tried task 29 and started everything all over again
I went to the a phone store, they couldnt help me. Afterwards i went to the official store but i don't have my receipt anymore so i don't have a warranty..
So i think i have tried everything i could find on this forum. Tried most of the HSPL versions with diferent roms. But all of them stay on the startup screen (white htc start screen)
If someone can help me please, this is really my last chance
Thanks,
Issam
ps. i hope this is the good section to post this problem.
Well the phone starts up now (it actually works for a few minutes!). I haven't changed anything, the only thing i did is leave the battery out for like 1 hour. But everytime i start up the phone it freezes and / or turns of after 1 min or something. Sometimes it doesn't even boot up like the usual problem, but then i remove the battery for 10 minutes and it boots normal again.
So i really don't have a clue
i was experimenting all day again with my htc.
What i found out was, the longer i keep my battery out of the phone the longer i can use it.
For example: I had the battery out of the phone for about 2 hours, when I put it back in i could use it for like 10 minutes.
But when i keep the battery out for 10 minutes it freezes within 1 minute.
Maybe this will help me get the solution to this problem.
I would format the sd card just in case, also make sure you have the correct versions of what you need, rom raido ect, because theres two types of HD2s, hope this helps!!
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
IssamRazza said:
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
Click to expand...
Click to collapse
You should remove hspl , and after that install the latest rom available on htc site for your device (download the rom from htc site, with your serial number ) . Official roms have included radio inside of them. If HSPL is removed and you have again problems with your device with an official rom installed, then you have a hardware problem. You could try to boot up without sd card installed, to see if the card is the problem.
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
IssamRazza said:
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
Click to expand...
Click to collapse
I see that you are on t-mobile network , so you should download your rom from here: http://www.t-mobile.com/wmupgrade/ . Just enter your imei and download the update. Remove HSPL and then install the official rom. Perform a hard reset after that , and see if is all ok . Keep us informed pls.
Hi, yes i have a T-mobile contract, but my phone is Vodafone branden so i'll have to download the Vodafone version I think.
But what i just did is this:
I had HSPL 2.08.HSPL and a Custom ROM on it. So I was planning on maybe sending it back. Thats why I performed a task 29 to delete all the previous (parts of the) Roms. After that i changed my HSPL to 1.66.000, the original spl I had on it.
But now the phone does vibrate when i hold the power butten (with vol down), but there is no picture, so i cant get into the phone or the Red green blue screen. So i think the phone will not boot because I deleted the Rom on the phone and also returned the spl to original.
Is there a solution for this problem? omg this phone just doesn't seem to be working for me (maybe it's me that is not working for the phone).
It is normal since you did a task29. Verify if you did it correctly here http://forum.xda-developers.com/showthread.php?t=644781
Yes i have read that thread thank you, but the question is:
How can i get the phone to connect with my PC, so I can install original ROM. Because the Boatloader screen won't start up, to make connection with my Computer. I press the power button and vol down butten at the same time. Tried it at least 20 times
Thanks you all. But i sent this phone back to HTC. The board was replaced and they sent it back, so it works again! finally my phone back
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
NeXuSqtek said:
Hello, I have a problem with my HTC HD2, it doesn't want to start. When I press the power button I feel only a tiny vibration, but only when the device is connected to a power source. Without power source it won't do anything.
Things that I've done : The phone was stuck in bootloader with the error "Upgrade ROM Code Error , Please try again", it had SPL SPL 2.08.0000 so I've flashed HSPL 2.08. After that my device wouldn't start.
Things that I've tried : Take the battery away from the device , connect the device to a power supply,wait 5 minutes then put the battery back on.
Hard-Reset.
Tried to enter bootloader.
Also tried to flash the stock rom, before flashing HSPL 2.08. My device was stuck at 0% with no progress what so ever.
Please help !
Click to expand...
Click to collapse
battery out, connect to wall charger and turn charger on, insert battery, dont touch it for a good half hour. dont worry if charging light doesnt come on straight away.
It sounds like the battery is possibly over discharged. doing as i listed 'should' let the phone start charging without trying to turn itself on.
ktod_16 said:
hello
I just both a new HD2 from Amazon and the thing don't want to start.
I started first time and it crashed at the training for keyboard. I removed the battery and it didn't want to start again. I did the reset, hard reset but it stay with a white screen and htc logo on. Is not doing anything.
I tried also to start it without SD-card and phone card but no change.
What to do should I send it back????
thank you.
Click to expand...
Click to collapse
yes send it back, silly to try and fix an error with a brand new phone. (Also, hijacking threads is considered bad manners. )
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
it's highly unlikely, but as with anything of this nature nothing is foolproof
elgeor said:
Hi!Unfortunately i have a big problem with my hd2.I have hacked it with hspl3.I have it 4 months now and i have flash to it about 10 roms.After i flashed the last rom suddenly my hd2 closed and when i opened it showed a white screen.I tried
to do reset to last official greek rom of htc(HD2_RUU_Leo_HTC_ELL_1.66.482.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship)changing the name of RUU_signed.nbh to LEOIMG.nbh and put it in to sd card.And in 5% shows me "update terminate,update fail,radio v2 fail" and then when it starts shows white screen again.I can get only in bootable mode (that mens in the screen with the colors ni wich you can see wich spl you have)How can i fix my hd2 pls?
Click to expand...
Click to collapse
bad news for you i'm afraid. i'm not aware of any successful fixing of radio update error.
Ok,thanks, I hope that the battery is the source of this problem,not the device .
I went today at a local service,they've told me that the battery is 100% charged. Unfortunately the problem is with my HD2. I left it in service and I will pick it up tomorrow repaired I hope. Thank you for helping me.
NeXuSqtek said:
Thank you very much samsamuel,by the way I have one more question to ask : Is it possible to brick the device by simply flashing HSPL 2.08 ? (SPL 2.08.0000 was installed)
I will try your method and I will keep you informed on my progress.
Thanks a million.
Click to expand...
Click to collapse
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Nice thread
netvpn7 said:
YOU GOT WRONG HSPL you should have 2.08. 6666 etc not 0000... I hope this helps
Click to expand...
Click to collapse
I knew I made a mistake, my question now is can it be fixed ?
Hi, I tried to instal Android 2.3 Gingerbread on my htc hd2 but when I installed MAGLDR it stopped working. I realized I had installed the wrong HSPL, but now it won't start or respond to a USB connection. I can't turn it on or off and it only shows a white image with HTC on it....Does someone know how to help?
Greetzz
pull battery, restart into bootloader, apply 2.08.hspl,restart.
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------
Mark-- said:
My HD2, won't start up.
My plan was to remove an ICS rom, but during my reinstallation of an other rom everything got deleted..
Now my problem, it won't load into MAGLDR, I do have HSPL 2.08 etc.
Does someone have an idea?
Click to expand...
Click to collapse
Finally I was able to load my HD2 into MAGLDR so problem solved..
I don't know where to begin so I'll just list the problems I have been encountering why trying to flash a stock ROM into my TMO HD2.
Preloaded with Android Gingerbread 2.3+HSPL 2.08+Magldr 1.11
Stuck at 123456 Go Go Go
Digitizer cracked & removed
Tried flashing stock TMO 3.14 ROM to ascertain if it is lack of digitizer causing problem
Was able to perform Task 29 normally initially
Could not run 3.14 RUU successfully nor via SD card method with HSPL 2.08 intact. RUU stuck at 8% & SD method stuck at Radio forever
Upgraded HSPL to 3.03 successfully using HSPL 4
Still could not run 3.14 RUU; same as above
Rolled back to SPL 2.08.000 using HSPL 4
Started having problems with Task 29; could not complete properly
Tried MTTY (v.1.42) but could not format NAND
Upgraded to HSPL 2.08 using HSPL3
Still could not perform Task 29 successfully. Sometimes successful & other times not. Mostly met with limited success using SD card method & CustomRUU Task 29 met with numerous connection error (262, 266, 284)
.....
Now, managed to roll back to HSPL 2.08 after redoing SPL 2.08.0000 even though 'We hacked it' screen stayed on with HSPL3 tool 'Critical error'
Trying to flash stock 3.14 RUU met with Error 284
Tried flashing from SD card, screen displayed 'Loading...' perpetually
After pulling battery for about 10 mins, powering up to 'Stick Together' splash screen without any red letters
Now when trying to flash using RUU, it would fail with Error 284/266 & the driver would spontaneously change from HTC USB Sync to Qualcomm Diagnostic Interface 3197 (COM17)??!!
Question:
I think my phone is not bricked but can it be salvaged?
Will the lack of a digitizer prevent it from being flashed?
Can it be salvaged with JTAG?
I cannot charge the battery in the phone now even with power off. Would the remaining battery power prevent or negatively influence the flashing?
Anyone who have met with success in recovering from something like this...or anyone who has dealt with similar symptoms, please advise me what to do from here.
I really need help.
Thanks!
Konker
RUU stuck at 8% & SD method stuck at Radio forever
Click to expand...
Click to collapse
Stuck radio, not a good sign,, (often sticks at 9% too, anything from 7 to 10 is usually the radio)
Can it be salvaged with JTAG?
Click to expand...
Click to collapse
probably your only option, though I would guess at a hardware issue, bad nand blocks, or similar with a ll the varied errors.
You could also try chilling teh phone in eth fridge, in a sealed bag for half an hour, with teh sd card ready to flash stock rom straight away, , if this is sucessfull, then you have thermal issues.
samsamuel said:
Stuck radio, not a good sign,, (often sticks at 9% too, anything from 7 to 10 is usually the radio)
probably your only option, though I would guess at a hardware issue, bad nand blocks, or similar with a ll the varied errors.
You could also try chilling teh phone in eth fridge, in a sealed bag for half an hour, with teh sd card ready to flash stock rom straight away, , if this is sucessfull, then you have thermal issues.
Click to expand...
Click to collapse
Thanks for the response!
Am I suppose to see the R... at the bottom of the splash screen if the radio is working normally despite having completed Task 29?
I know the OS is wiped but the radio is still there....I think.
Does JTAG restore the radio?
The phone does not get anywhere near hot or very warm when I'm doing all these steps so will putting it in the freezer make a difference? I was under the impression that this works when the device has been exposed to heat or is hot for an extended period of time.
Task 29 doesnt touch the radio, only the rom. You may be able to flash cooked roms, and maybe magldr, just not anything with a radio included. Fridge probbly won't help if you're happy that it isn't heat related.
samsamuel said:
Task 29 doesnt touch the radio, only the rom. You may be able to flash cooked roms, and maybe magldr, just not anything with a radio included. Fridge probbly won't help if you're happy that it isn't heat related.
Click to expand...
Click to collapse
I'm not seeing the R... at the bottom of the splash screen now so does that mean that my radio is fried?
Also, can you comment if not having a digitizer installed would prevent WM6.5 from flashing properly? I've read in the Android thread that it will prevent Android from booting, which is why I decided to flash a WM ROM first to ascertain the hardware condition.
I'll give the 'cold treatment' a try & see how it goes & am in the process of downloading a custom ROM to try. The current HSPL is 2.08 but I'm not sure if it is working properly since the last HSPL attempt ended with the 'We hacked it' stuck on the screen without a reboot & a critical error for the HSPL tool.
Lastly, any idea why it would switch from standard driver to diagnostics driver? It's weird & I can't explain it.
konker said:
i'm not seeing the r... at the bottom of the splash screen now so does that mean that my radio is fried?
Samsamuel... it's a bad sign, but there are situations where that info doesn't show, however combined with it sticking at 8%, which is about when the radio gets flashed.....
Also, can you comment if not having a digitizer installed would prevent wm6.5 from flashing properly? I've read in the android thread that it will prevent android from booting, which is why i decided to flash a wm rom first to ascertain the hardware condition.
Samsamuel........ No, people have flashed successfully with broken digitizers, shouldn't affect winmo, up until it requires input after initial boot.
I'll give the 'cold treatment' a try & see how it goes & am in the process of downloading a custom rom to try. The current hspl is 2.08 but i'm not sure if it is working properly since the last hspl attempt ended with the 'we hacked it' stuck on the screen without a reboot & a critical error for the hspl tool.
Samsamuel....... Id try a different pc if at all posible, though i have had to pull battery myself at the hacked it screen, (not even sure it does reboot itself, from memory, hehe)
lastly, any idea why it would switch from standard driver to diagnostics driver? It's weird & i can't explain it.
Click to expand...
Click to collapse
that's worrying, too, because that's what happens when tmous gets radio bricked,,,phone becomes utterly unresponsive and pc searches for qualomm diagnostic drivers.
I too in similar situation. I can't get NAND android to boot up get stuck on 123456 GO GO GO! Try flashing the stock rom and get stuck on 8% Task 29 still work for me. If I flash Task29 you think I'm able to flash a custom rom that doesn't touch the radio? The only problem is that i was able to flash the radio with no problem.
itzstevo said:
I too in similar situation. I can't get NAND android to boot up get stuck on 123456 GO GO GO! Try flashing the stock rom and get stuck on 8% Task 29 still work for me. If I flash Task29 you think I'm able to flash a custom rom that doesn't touch the radio? The only problem is that i was able to flash the radio with no problem.
Click to expand...
Click to collapse
Do you still have magldr on the phone?
If not, do you see the R...when the default splash screen shows up after powering up the phone?
If not, you might be in a similar situation as me.
I cannot ascertain if my radio is really bricked as there's no way to see or detect that & as samsamuel indicated, having the PC detect a diagnostic port might suggest that my radio is bricked.
I did try to flash a compatible radio to my phone but it failed everytime.
Magldr is still on the phone. I am able to flash new radio with no problem. are you able to flash just a rom and not a a rom & radio?
samsamuel said:
Stuck radio, not a good sign,, (often sticks at 9% too, anything from 7 to 10 is usually the radio)
probably your only option, though I would guess at a hardware issue, bad nand blocks, or similar with a ll the varied errors.
You could also try chilling teh phone in eth fridge, in a sealed bag for half an hour, with teh sd card ready to flash stock rom straight away, , if this is sucessfull, then you have thermal issues.
Click to expand...
Click to collapse
yes you are right my bro ... had same problem ... after cooling phone in fridge for 5-10 min it will go perfect BUT still it wouldnt boot into winm so i decided to try android in nand , flashing went ok but after that it wouldnt boot Fatal hit ( magdlr) so i put phone in fridge again for 5-10 min and Yes it booted in android - tried same with WP7 ... But after using a while it will get hot and will stock or restart
konker said:
[*]Can it be salvaged with JTAG?
Click to expand...
Click to collapse
No my bro... jtag only writes boot - repair files
itzstevo said:
Magldr is still on the phone. I am able to flash new radio with no problem. are you able to flash just a rom and not a a rom & radio?
Click to expand...
Click to collapse
I think your HD2 is in a lot better shape than mine.
At least you can flash your radio...I can't flash either ROM or radio.
But I suspect your problems might be due to corrupted NAND.
Have you tried Task 29 with mtty?
At least you can see error messages with mtty when doing Task 29.
ubejd said:
yes you are right my bro ... had same problem ... after cooling phone in fridge for 5-10 min it will go perfect BUT still it wouldnt boot into winm so i decided to try android in nand , flashing went ok but after that it wouldnt boot Fatal hit ( magdlr) so i put phone in fridge again for 5-10 min and Yes it booted in android - tried same with WP7 ... But after using a while it will get hot and will stock or restart
Click to expand...
Click to collapse
ubejd, you gave your HD2 the 'cold treatment' after it turned warm & refused to boot or rebooted automatically am I right?
Would it do my HD2 any good to put it in the freezer when it is cool as room temperature? It has been sitting there unplugged & unpowered for at least 8 hours. I have not tried the 'cold treatment' but flashing custom ROMs with HSPL 2.08 also failed.
Seems like a combination of radio brick & NAND failure...
konker said:
ubejd, you gave your HD2 the 'cold treatment' after it turned warm & refused to boot or rebooted automatically am I right?
Would it do my HD2 any good to put it in the freezer when it is cool as room temperature? It has been sitting there unplugged & unpowered for at least 8 hours. I have not tried the 'cold treatment' but flashing custom ROMs with HSPL 2.08 also failed.
Seems like a combination of radio brick & NAND failure...
Click to expand...
Click to collapse
yes you are right my Bro
you can try, it wouldnt do any harm but just put in isolated place - bag before putting in the fridge - to keep safe phone from getting wet and dont let more then 5-10 min maximum... but as i told it will not boot again in win mob - i hope it does but i doubt ... if it fails to boot than consider to go with android or winp7
i have one question how it began to act like this... did it fall or you bought like that
i hope you success
best regards from me
Gave it a go with the freezer test. I was surprise that i was able to boot up into CWM, & load up Android. Now I can only use the phone for maybe 20 min or so before it get hot again and I have to put it back in the freezer. Is there a way to tell which HD2 is bad batch?
I first one had no problem beside the bad screen, my 2nd HD2 is having heating issues. Seem like I can't win.
itzstevo said:
Gave it a go with the freezer test. I was surprise that i was able to boot up into CWM, & load up Android. Now I can only use the phone for maybe 20 min or so before it get hot again and I have to put it back in the freezer. Is there a way to tell which HD2 is bad batch?
I first one had no problem beside the bad screen, my 2nd HD2 is having heating issues. Seem like I can't win.
Click to expand...
Click to collapse
I gave my HD2 the 'cold treatment' & I was mildly surprised that it reached the 2/3 mark when using the SD card method to flash a custom ROM but that was it. Back to square 1...
itzstevo said:
I first one had no problem beside the bad screen, my 2nd HD2 is having heating issues. Seem like I can't win.
Click to expand...
Click to collapse
if you have both of them take motherboard from the one who has bad screen and put in one who has heating issues this way you will have at last one working hd2...
I had the same problem too. I knew I wasn't the only one with this problem.
Now I'm sure, MAGLDR makes the NAND corrupted (over 8%). My phone won't charge too, gets stuck at 8%, get stuck on splash screen and doesn't show any red lines...
PasSlert said:
I had the same problem too. I knew I wasn't the only one with this problem.
Now I'm sure, MAGLDR makes the NAND corrupted (over 8%). My phone won't charge too, gets stuck at 8%, get stuck on splash screen and doesn't show any red lines...
Click to expand...
Click to collapse
Flash failing at 8/9% has been happening long before magldr, , and seems to be connected to the radio being corrupted.
But I can flash a radio via RUU... if my radio were corrupted, flashing a radio should not be possible. Am I right ?
With RUU : I'm stuck about 1 minute on 8% then the process resume up to 100% without any error, but whatever the ROM I flash, no one reach splash screen.
With SD : No problem.
Like the OP, my phone is acting weird when I plug on charge.
With cable to PC : autoboot (MAGLDR 1.13 issue)
With cable to AC : red led but when I plug off the cable, the red led is still on (until I remove the battery).
It's clear that in any way, MAGLDR is not completly removed of my HD2 (yeah, I flashed some stock ROM with SD card).
I think I'll send it to repair, I'll leave feedback if I send it.