I recently purchased a Nordic Track 9500 Elite Pro. This bad boy has a 10" android tablet built in. They really don't want you messing with the android part much, but I am sure there are plenty of other users out there like me that want to do more!
This is my first post so I am unable to show the pictures via the link. Hopefully you can copy and past the text to view the images. I will try to repost on my website so it all flows.
I don't see where a post like this would go, I am not sure if at some point it would gain it's own device forum... That would be exciting. So for now I will post here. I will also post my initial findings for others in the community that may want to purchase this treadmill and can't find any information regarding the built in Android Tablet with WiFi.
This image shows the version information. From what I can tell it looks like they purchase an APAD from someone and then stick it inside of their device. They also must have wrote some special drivers and software to interface with the equipment and hardware. I was very happy to see a mainstream current android OS.
Android OS 2.2
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0027.jpg
Click to expand...
Click to collapse
Here are the pre-installed apps. Pretty basic. (note: I was able to find an APK and install Last.FM that wasn't included) Also a major bummer to see was that there wasn't a market application.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0026.jpg
Click to expand...
Click to collapse
This is the typical workout screen you see.
hungrykzoo.com/wp-content/uploads/2011/01/IMAG0024.jpg
Click to expand...
Click to collapse
I also noticed that the device doesn't have very much memory. This could be due to the built in applications taking up so much space. It only had about 57MB of internal memory free, but it had a built in 2GB SD Card. I have not gotten to the point where I have needed to take it apart yet to see if there is a replaceable SD card. I may wait another 5 years for my warranty to end to do that.
I have tried to install some apps but have not had very much luck. The only app that was I was able to install was the Last.FM.
I tried the follow apps, and they didn't install:
1. Market
2. Angry Birds
3. Pandora
Other disappointments:
1. Designed to not be in the Android Interface. They have an application that runs, and makes it tricky to get to the android desktop. It takes about 3 clicks to get from the main workout screen back to the Android Desktop.
2. The screen is not capacitive, it is resistive. I don't know how much more I need to say about that.
3. Only 3 buttons. Back, Menu, Home. Home takes you to their software not the android home screen. Long press on home does nothing.
4. When i go to the desktop the Time is all over the place. I have tried changing settings in every spot possible but something is telling it what time to think it is, occasionally it is correct... Just don't get it.
Even with the disappointments this thing is sweet. I wish i could install more apps, stream videos from a PC over the WiFi connection and stream music from a PC over the WiFi connection. Maybe with the help of the community we will figure some of these items out... Or I will be the only one who has this that knows about this website!
ntsteele,
How is your experience up to now with your 9500? I am looking at getting the c1250, which is the same as the 9500, but with a smaller motor and no decilne. Is the 10" screen worth it? The rep at Nordictrack told me the only differcence between the 7" screen is the web browser, the google maps display, and some basic apps. But overall the workout system is the same as the 7' display of the 1750 commercial and that you can view the google maps by logging in on ifit.com. Thanks for the info and screen shots.
iFit Android App
Have you or has anyone else been able to pull the apk files off of the NordicTrack Elite 9500 Treadmill. I would be interested to see if it works on any adroid phone to view the menu system.
I played with this today at Google IO. The rep said that the integrated tablet was rev 1 and that they wanted to eventually let users connect their own devices.
what do you need to press to get to the android home screen?
Where I work at there is a Proform Trailrunner 4.0 treadmill that has 10" Android tablet screen. From what I have been told nordic track and proform are made by the same manufacture or something. It was returned because of a broken display unit. Of course I wasn't going to let them throw the old one away so they let me keep it. I trashed the main display and now I have the 10" tablet but cannot power it because the treadmill doesn't operate without a magnetic key. How could I power this thing and see if it works?
I got the new incline trainer x9i which has the 10 inch android interface. I am interested to get in and try installing apps as you have but I am unable to even get to the android home screen. The only time I see it is when I turn the machine on and it is booting up, the screen comes up for a few seconds to where I can hit on the applications button and see what is on it. But within a second after I see the apps it automatically gets routed into the machine exercise interface and I have not figured how to get back to the android home screen from there. How did you do it? It would sure be nice to install a different browser. I hate the fact that I cannot create my own shortcuts. Anyway, love the machine.
How to get to the Android Home Screen
Any luck finding out how to get to the Android Home Screen? I am wanting to do that also. I was able to get to it one time accidentally, but haven't figure out how to stop the machine interface from loading since.
Home Screen
Ok, same question. I just got a C2150 which is a similar model to the 9500. Slightly smaller motor and belt, but same basic thing with the 10" tablet. I believe it's capacitive now, but still not great as far as that goes.
I too have hit the setup icon when it's booting and it goes to the Android setup screen for a second and then continues to boot into the Nordictrack IFit proprietary stuff.
So I can't believe the posts with the images and no explanation of how you got there? Please share with the rest of us.
Also, my console has a USB connector at the top of the thing. Any idea what if anything that'll let me do?
Thanks!
Anyone figure this out? Seems a shame to have a 10' screen and not be able to install apps on it. There must be some button combination that the Icon service team would use to stop the auto load of the iFit interface.
Internal Pictures
I took the tablet apart to see what information can be gathered. Apparently, HANNSTAR (TAIWAN) manufactures the board (HANNSTAR J MV-7); which uses a Samsung ARM8 CPU(5PV210AH-A0 1044); has 512MB; and a 4GB SANDISK FLASH (SDIN2C2-4G).
I haven't been able to find sufficient info to track a compatible ROM, yet I can't imagine for the life of me that HANNSTAR would design this just for Nordic. I am posting some pics hoping that someone might be able to id the hardware, which in turn might help point to a more fruitful search for a workable ROM.
Try to upload pics but not sure if it worked. It's late, and I can't figure out how to do it smoothly yet.
I'm gonna do another bump. I have a similar treadmill (or maybe the exact same one, I lost the the manual with product name). It is of the X9i series and when I saw it in the store, I had to go for it. I was a bit irritated to see that you are locked to the iFit application and you cannot return to the launcher. I need a male to male USB cable to see if I can get a bit of ADB on it.
From the (crappy) performance of it, I can tell it has about 512 MB RAM, a dated CPU clocked at around 600-800MHz, the screen looks like a crappy TFT display at 1280x700. Lastly, this thing runs Froyo. Mine features a full USB port and an Audio in port. Not much to screw around with. Downloads are disabled in the browser, and the Menu key does nothing.
I think something can be done though. The application that controls the treadmill can't crash as it is, and if it ever does FC, the motor shouldn't stop. NordicTrack doesn't have a recovery image up for some reason (thanks, NordicTrack -_-) so that's even less to work with.
Nevertheless, something can be done. It's not really a fun thing for an Android enthusiast to pick up an Android device with such dated hardware (the tredmill itself, as just tredmill is amazing).. Plus, it was $2,100 at Sears.
---------- Post added at 08:48 PM ---------- Previous post was at 08:43 PM ----------
here is a video of the Treadmill and the board;
http://www.youtube.com/watch?v=eKyf6MHIefk
USB and Audio in is on the right side of the console.
I've had my Nordictrack 9500 Pro for about a year now. Still working well for the most part (I do have messed up deck tension adjuster that I need to call support about).
Would love to be able to unlock the Android device to at least install Netflix, Pandora, etc.
I have had one over the air firmware upgrade that went pretty smoothly. Was hoping more updates would come from Nordictrack, but it has been a long time since that one.
Has anyone else noticed that the Speed Calibration utility under the iFit controls says that it isn't enabled yet? Maybe there's hope for future updates.
fanVrARCHITECT
Greetings,
I have been following this thread as a 9500 owner as well, and looking at what has been posted and see if there is any follow up.
1.) like everyone else what startup combinations may have disabled Nordic Tracks proprietary software.
2.) the usb socket on the top of the console, has anyone had anyluck attempting a usb male to male connection on a laptop? If so what has been tried?
3.) any idea of maybe porting something over via the Ifit updates or account? I noticed the HDvideo inside of the program is pretty descent from what I've seen, and looks like the video plays in the center of main app..just a thought.
I'm looking at getting the male to male usb cable and trying to interface it with the below. .. at least curious if the cable will talk, and most likely this unit is not root so view only but maybe a start if it works.
//www*howtogeek*com/howto/42491/how-to-remote-view-and-control-your-android-phone/
Cheers,
devmo
Did anyone figure out how to get android home screen????
I read somebody was able to email themselves an apk and install it? The tablet enables sideloading? Ding ding ding! I'm going to try sideloading launcherpro or any other replacement launcher to attempt to hijack the home screen
Update: Didn't work on my c2150's tablet. Bastards.... I did however get my c2150's to boot into "safe mode" which I have no idea what that entails. While it was powering on, I held down home and back I believe was the combo.
Update: SUCESS!!! So by booting into "safe" mode, you can hit the preferences launcher while the device is booting to interrupt the ifit loading. From there, go enable unknown sources. Then launch the browser and google "z4 apk" and download it and run it. Did permanent root on mine and it worked.
ENJOY
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
jsteelm said:
I forgot. Once you get the device into safe mode, install "smart taskbar" by sideloading. It'll make you able to view a task bar over ifit.
EDIT: Since we don't have a custom recovery, or for that matter even a recovery at all it seems, I've not attempted gapps. Could anyone give a detailed response on how to install this? I assume just unzip it in the root directory? I'm worried about permissions, I always forget what to set there. Also, the device comes pre-bundled with busybox, fyi Another must have for this is adbWireless. I tried editing the init.rc but it seems those changes were for nothing. I'll keep people updated as I discover things etc. I'm by no means a dev, but do know a little.
Click to expand...
Click to collapse
Sorry - can you tell me the exact steps involved here. How do I get to safe mode and then what? I tried Home Back while powering on and it still goes to the ifit screen
You know I'm really not sure what trick it is to make it stay. I had good luck getting it to stay in android rubbing home/back/menu while it booted and as soon as I saw the android home screen, hit the preferences launcher and then grabbed the top menubar and half pulled it down. All I know is that when you get it to stick in android, its always in safe mode which is triggered by some combination of those buttons on boot. Even then it will boot into iFit, but if you go to the settings first, in safe mode, it wont exit that screen.
Nordictrack commercial 2150 Android Safemode
Very simple folks. Turn treadmill on and once you see ANDROID appear in the center of the screen, begin pressing the dashes button that is between the home and back buttons on the console. Not sure if holding down works any better. An "unable to load widget" will be seen in middle of screen once the I-FIT software has stopped and safe mode will appear at the lower left hand corner. You'll then be able to check out the various Android options etc for your tablet. Be careful in editing anything unless you know what you are doing! Wouldn't want to brick your treadmill unnecessarily. It took awhile to find the key to safe mode access, due to limited info out there, but I hope users will continue to make some progress on exploiting this device and maybe we'll be able to use it to our liking. I would like to stream my dish television to the tablet like I do on my i phone or i pad. Being able to install the dish app via google app store is what I'm looking forward to. I want to be able to watch tv on my treadmill while exercising. Please keep this thread going! I'm sure that future software updates may allow for a better user interface. The challenge is certainly in the storage capabilities in the tablet itself and the sd card inside.
Related
Hi all,
Hope I'm posting this in the right place. If not, please move.
I have Remix_OS_for_PC_Android_M_64bit_B2016072603 installed as a virtual guest in Virtualbox 5.0.24_Ubuntu r1083 with Xubuntu-core 16.04 as the host machine. Using a Toshiba Satellite Pro L510. Took me four days to nut out how to get to this point, but installed and booting and stable now.
My issues:
1/ Location: When I try to run an app from Play Store it thinks I'm outside of Australia/New Zealand (the app I'm trying to run is specific to those regions). I'm in Australia, the app works fine on my phone (am logging in exactly the same way).
(* Update: I installed GPS Status and it tells me GPS is not switched on. Was hoping to then change the location with Fake GPS, which I also installed. It won't do anything with same message: GPS not enabled or similar.)
2/ Resolution: The screen defaults to portrait, as expected I suppose, but I have a 1366x768 monitor and it doesn't fit in the screen. Consequently, I have a scroll bar because as Virtualbox Guest Additions is not compatible with Remix OS at this point there is no mouse integration (I need to hit Right Control to use mouse in host and same to use in guest again). I need to press a bunch of keys to just scroll the screen up and get back to where I was going. :|
Other than that, all working great, Remix OS is great, thanks to the team that created it. The main reason I was wanting to use it is to use this one app on my computer (AFL Live) and plug my computer into the TV. I don't use my phone for anything other than that one app, SMS and the occasional call so I am by no means an Android junky. In fact, before this, I knew very little about it (but a lot about Linux/Ubuntu).
This install has been a quest, a learning curve, and these are my last two hurdles so I'm calling for help if it's out there. Trawled the net, tried some things, but have hit a brick wall with these two problems.
My first post so not sure of the protocol. If these two issues should be the subject of two separate threads, mods please advise and I will edit accordingly and create a new thread.
Tnx in advance.
(* Further update: Just having a read of this: http://forum.xda-developers.com/remix/remix-os/remix-os-installation-rooting-t3293769
Wondering if rooting the device would allow me to change any of these, in particularly, the location to Australia where it should be, or switch on GPS so my app can see where I actually am. I'm presuming it thinks I am in the Cocos Islands or somewhere else!)
(* And further update: The screen resolution was as easy as typing Alt+F1 to launch a terminal then 'wm size 1366x768'. That looked terrible, though, so changed it to 1048x768 (from memory) and it is good enough, though not perfect. I may be able to get closer with further tweaking. Now the last, and most important, hurdle to leap: How do I get Remix OS, and more specifically my AFL app, to know I'm in Australia. Frustration. It's taken about ten days, on and off, to get here and still not quite where I want to be, but hopefully my travails can help someone else along the way ...)
Gave up on it. If anyone comes up with a way of running Remix OS in Virtualbox and setting the location, please post. Guestadditions would probably fix it and maybe one day ROS will be compatible with it.
On the other hand, I did learn a lot more about Android than I cared to know, but am now thinking about buying my first ever Android tablet to do the job with a USB/HDMI adapter.
So I came into possession of a commercial grade advertising kiosk (Nintendo Amiibo Display) that runs an Android OS 4.1.1. The device is setup to auto load the "AmiiboFrameWork.apk" package installed. The model of the system is DucoTech D185-ACA-720. I can access basic Android settings menus through a special key combination. Mainly system information, network setup, and volume controls. There is a menu that says App Install and gives the option of installing APKs from SD card or USB with a file structure of USB:\APKFiles\ or SD Card:\ApkFiles\. However no matter how I layout my file structure or name my APKs following that structure nothing appears in this menu to install. However There is a media tab for photos with a similar structure and photos I put on the card do show up. What I'm trying to figure out is how either install APKs, or access the base android system so I can customize the system to run custom apps I plan on making for it. However I want to retain the original AmiiboFrameWork APK or the whole OS so I can restore the system later if I want.
Now what I have tried is plugging it into my PC via the USB-OTG port while on, putting APKs in various file structures and naming conventions, booting it with my PC connected via OTG port, tried to trick my way into other menus through keyboard and settings menu tricks (similar to how people use to bypass lock screen security through menus).
Results:
1. OTG to PC while on: Device shows up as 2 USB 2.0 Flash drives in device manager. The drives appear in my computer but aren't accessible. ADB doesn't see it as an android device.
2. APKs on usb: Nothing shows up in the menu regardless of my naming convention or file structure.
3. Boot device while attached to PC via OTG port: My computer detects it as an NES Classic (previously installed the driver to mod my classic). This leads me to think its an Allwinner device or similar since that is what the driver was made for I believe? ADB still doesn't see it. This might be my best bet to get in.
4. Menus: Options are very limited and I wasn't able to access anything valuable aside from Install APK, Transfer Media, and Set startup APK.
5. Tapping build number: Tapping the build number in settings any number of times doesn't activate the developer mode options. The prompt doesn't even appear for it.
If anyone can assist in trying to gain access to this system, or even figure out the file structure so I can just install my own APKs like I want that would be great. Any ideas on where to look, what to try, and so on is greatly appreciated.
Here are some photos of the main board just in case
Any new updates to this? I made the mistake of uninstalling the Amiibo Framework APK so now all I can do is see the settings menu with no ability to install any APKS. Copying media files over does work though.
hedburnr said:
Any new updates to this? I made the mistake of uninstalling the Amiibo Framework APK so now all I can do is see the settings menu with no ability to install any APKS. Copying media files over does work though.
Click to expand...
Click to collapse
IDK what to say man other than what in God's name made u think framework.res needed to be pulled. It's gone man barring the original firmware and itself install method
hedburnr said:
Any new updates to this? I made the mistake of uninstalling the Amiibo Framework APK so now all I can do is see the settings menu with no ability to install any APKS. Copying media files over does work though.
Click to expand...
Click to collapse
I work with Ducos! In fact there's an Amiibo kiosk a few feet from me here in our offices
mojoswagger1980 said:
IDK what to say man other than what in God's name made u think framework.res needed to be pulled. It's gone man barring the original firmware and itself install method
Click to expand...
Click to collapse
AmiiboFramework doesn't have anything to do with the "framework.res", Nintendo just called the app the "AmiiboFramework"
They only install APKs with a specific package name in a specific folder on your USB device / SD Card (com.general.mediaplayer.player). Unfortunately Nintendo used a different folder than us, and I don't recall what it was. You can go into a "normal" Android screen using a special procedure if the AmiiboFramework app is installed, but it should work without it too:
- Wait for the Loading screen to appear
- Begin to press the CSR and Setup buttons together, quickly alternating between them. Repeat until the CSR appears
- After the CSR appears, leaving the screen open for an extended period of time will cause the Amiibo Display Framework to re-appear
- If Alt+Tab is used, be sure to return to the CSR before returning to any other app, or the CSR will reboot the player
Alt+Tab refers to using a USB keyboard, after you have the CSR up you can exit with it.
They're really not great hardware for general usage.
selaliadobor said:
I work with Ducos! In fact there's an Amiibo kiosk a few feet from me here in our offices
AmiiboFramework doesn't have anything to do with the "framework.res", Nintendo just called the app the "AmiiboFramework"
They only install APKs with a specific package name in a specific folder on your USB device / SD Card (com.general.mediaplayer.player). Unfortunately Nintendo used a different folder than us, and I don't recall what it was. You can go into a "normal" Android screen using a special procedure if the AmiiboFramework app is installed, but it should work without it too:
- Wait for the Loading screen to appear
- Begin to press the CSR and Setup buttons together, quickly alternating between them. Repeat until the CSR appears
- After the CSR appears, leaving the screen open for an extended period of time will cause the Amiibo Display Framework to re-appear
- If Alt+Tab is used, be sure to return to the CSR before returning to any other app, or the CSR will reboot the player
Alt+Tab refers to using a USB keyboard, after you have the CSR up you can exit with it.
They're really not great hardware for general usage.
Click to expand...
Click to collapse
Ohh, I tried to call and they wouldn't answer any of my questions lol. Is it possible to get any documentation on it? I'm sure Nintendo did their own setup, but having original documentation is a good step forward for what we have now. I'd love to setup my own configuration on it even if the hardware is meh.
Enmity said:
Ohh, I tried to call and they wouldn't answer any of my questions lol. Is it possible to get any documentation on it? I'm sure Nintendo did their own setup, but having original documentation is a good step forward for what we have now. I'd love to setup my own configuration on it even if the hardware is meh.
Click to expand...
Click to collapse
There isn't much more documentation than what I mentioned unfortunately. The people who you'd get in a call definitely don't know anything about them (I don't think Nintendo made the AmiiboFramework app in-house either). If you want to repurpose it, you can try getting into the CSR and going into the normal Android Launcher. Try connecting over ADB and force-stopping any process with the letters "csr" in it's name
---------- Post added at 11:44 AM ---------- Previous post was at 11:40 AM ----------
Enmity said:
Ohh, I tried to call and they wouldn't answer any of my questions lol. Is it possible to get any documentation on it? I'm sure Nintendo did their own setup, but having original documentation is a good step forward for what we have now. I'd love to setup my own configuration on it even if the hardware is meh.
Click to expand...
Click to collapse
There isn't much more documentation than what I mentioned unfortunately. The people who you'd get in a call definitely don't know anything about them (I don't think Nintendo made the AmiiboFramework app in-house either). If you want to repurpose it, you can try getting into the CSR and going into the normal Android Launcher. Try connecting over ADB and force-stopping any process with the letters "csr" in it's name
To connect to ADB use a USB mini cable on the "USB OTG" port and ClockworkMod's Universal ADB Driver
I have a few devices similar to this. They are duco DT156-AS4-1080. I was wanting to repurpose them as video players. The devices are wiped of content and load into a main menu. There is an option to exit to administrator, though it asks for a password. I dumped the partitions and tried to look through the binaries, but am unable to come up with anything. I can get into superSU and then exit to playstore, but then some type of watchdog kicks me back to the duco menu. Any help appreciated.
er0ck said:
I have a few devices similar to this. They are duco DT156-AS4-1080. I was wanting to repurpose them as video players. The devices are wiped of content and load into a main menu. There is an option to exit to administrator, though it asks for a password. I dumped the partitions and tried to look through the binaries, but am unable to come up with anything. I can get into superSU and then exit to playstore, but then some type of watchdog kicks me back to the duco menu. Any help appreciated.
Click to expand...
Click to collapse
Just uninstall com.general.mediaplayer.* (anything that starts with that package name) and you should have a normal device
I DID IT! Working tablet
So the story is yesterday I found an Amiibo display at my apartment dumpster where people put stuff they don't want that still works, I nabbed it with the intention of salvaging the "monitor." Judging by the hammer-marks on the acrylic enclosure, and pry marks on the metal cage that held the power supplies for the led strips and the tablet I assume somebody took it home, got frustrated by the locks and screws after some prying, and just busted in the acrylic window to get to the floor model Amiibos.
I cracked it open, and after some fun with a butane torch to melt the acrylic around the screws open (damn security hex) was surprised to find that the "monitor" had a usb dongle plugged into it. I plugged it into my station and found it was a 2.4/5 GHZ wifi dongle.
All code here is from Windows power shell since I don't like to dual boot my main gaming rig. Usually I just use the Bash on Ubuntu on Windows developer option for stuff like this, but I didn't know if the fact I was using Windows usb drivers to connect to this would cause problems and I wanted one fewer step to troubleshoot if I had issues. Forgive me penguin for I have sinned.
I found the item number on the back of it and after some googling found it was an android device. Score!
I plugged the tablet in and it went into an Amiibo advertisement kiosk mode.
After about 8 hours I now have a limited (but functional!) giant Android tablet.
To any future adventurers I am making a guide to get you up and running quickly.
I followed selaliadobor's instructions:
To connect to ADB use a USB mini cable on the "USB OTG" port and ClockworkMod's Universal ADB Driver
Click to expand...
Click to collapse
As well as pressing CSR and Setup to get into the settings screen. This was interesting, but ultimately didn't do much. However using
Code:
./adb shell logcat >> log.txt
and waiting for it to reboot from the csr menu led me to find (with some help from my engineer father) that /system/app/CSR_A003_20160304_BT.apk was the culprit of the restarts.
This was solved with
Code:
./adb shell rm /system/app/CSR_A003_20160304_BT.apk
From there I was stuck. But then I discovered: THE CSR SETTINGS MENU IS NOT THE REAL ANDROID SETTINGS MENU. To get to the real android settings menu use this:
Code:
./adb shell am start -a android.settings.SETTINGS
This allows you to do a factory reset!
However when it reboots the default launcher is stripped of important features like back/home/running apps, keyboard, a launcher etc. I sideloaded the following apps:
Chrome Browser
Microsoft Arrow Launcher (I originally used Nova but it was too much a ram hog to be useful)
Multiling Keyboard (I originally used Swiftkey, but it too was taking up too much ram)
WebTube (stripped down youTube frontend)
Soft Keys (so I had a home and back button, the running apps button still doesn't work :'( )
First post so no links ;(
imgur .com/dGAOmoM
This is what it looks like after boot. I may also have an affinity for Amiibos.
imgur .com/uQ8u7js
Classic.
Quick note: This device doesn't support google play services, so no hulu, official youtube, netflix unfortunately. Try as I might I haven't found a solution.
i bought a box of these units a while back from the carboot and wanted to use them in our coffee shop were opening, i too didnt have much luck with them then i saw this thread, i know abit about computers but never messed with android, we basically wanted to use them for what they are used for now for displaying changing menus and advertising etc, i downloaded the clockworkmods adb, now how to enter the "./adb shell logcat >> log.txt" etc, presumably i just connect the otg port to the pc (win10) run the clockworkmod program then i use commandpromt? i did try it but i couldnt get it to work, do i have to put the android device into a mode like csr? any help would be appreciated?
N/A
Additional help needed
i got to the settings menu but it is only temporary i am wanting it to be like a regular tablet where can i get a rom to do that? to flash it so it will function like a galaxy tab 3 or so, as i would love to use my DT101-ASA-800 like a normal tablet with a keyboard and mouse. any help would be welcomed. as the factory reset doesn't let it work any different it keeps going straight to CSR settings.
so stuck... my head hurts
so i can not get my Model DT185-ACA-720 to connect to my pc..... ok it connects and a K: and F: drive appear but I cant access them. I managed to get .apk files to show up and transfer to the 12gb storage on the tablet but i cant access the storage on the tablet... im so lost... I downloaded the universal driver and ADB but both changed nothing... If anyone has any advice or updates im all ears since I basically destroyed the Kiosk to get this tablet free
jaybanc said:
i bought a box of these units a while back from the carboot and wanted to use them in our coffee shop were opening, i too didnt have much luck with them then i saw this thread, i know abit about computers but never messed with android, we basically wanted to use them for what they are used for now for displaying changing menus and advertising etc, i downloaded the clockworkmods adb, now how to enter the "./adb shell logcat >> log.txt" etc, presumably i just connect the otg port to the pc (win10) run the clockworkmod program then i use commandpromt? i did try it but i couldnt get it to work, do i have to put the android device into a mode like csr? any help would be appreciated?
Click to expand...
Click to collapse
Same issue here with the DT133-AC4-900 that I managed to pull out of a trashed google nest display from where I work. I managed to get the device to always load to the DUCO app by uninstalling the mediaplayer throught the DUCO app. However that is as far as I can get as the device will not communicate with ADB at all. Not sure if it's a win10 thing or if it's the device itself.
TheArcticGentoo said:
I DID IT! Working tablet
So the story is yesterday I found an Amiibo display at my apartment dumpster where people put stuff they don't want that still works, I nabbed it with the intention of salvaging the "monitor." Judging by the hammer-marks on the acrylic enclosure, and pry marks on the metal cage that held the power supplies for the led strips and the tablet I assume somebody took it home, got frustrated by the locks and screws after some prying, and just busted in the acrylic window to get to the floor model Amiibos.
I cracked it open, and after some fun with a butane torch to melt the acrylic around the screws open (damn security hex) was surprised to find that the "monitor" had a usb dongle plugged into it. I plugged it into my station and found it was a 2.4/5 GHZ wifi dongle.
All code here is from Windows power shell since I don't like to dual boot my main gaming rig. Usually I just use the Bash on Ubuntu on Windows developer option for stuff like this, but I didn't know if the fact I was using Windows usb drivers to connect to this would cause problems and I wanted one fewer step to troubleshoot if I had issues. Forgive me penguin for I have sinned.
I found the item number on the back of it and after some googling found it was an android device. Score!
I plugged the tablet in and it went into an Amiibo advertisement kiosk mode.
After about 8 hours I now have a limited (but functional!) giant Android tablet.
To any future adventurers I am making a guide to get you up and running quickly.
I followed selaliadobor's instructions:
As well as pressing CSR and Setup to get into the settings screen. This was interesting, but ultimately didn't do much. However using
Code:
./adb shell logcat >> log.txt
and waiting for it to reboot from the csr menu led me to find (with some help from my engineer father) that /system/app/CSR_A003_20160304_BT.apk was the culprit of the restarts.
This was solved with
Code:
./adb shell rm /system/app/CSR_A003_20160304_BT.apk
From there I was stuck. But then I discovered: THE CSR SETTINGS MENU IS NOT THE REAL ANDROID SETTINGS MENU. To get to the real android settings menu use this:
Code:
./adb shell am start -a android.settings.SETTINGS
This allows you to do a factory reset!
However when it reboots the default launcher is stripped of important features like back/home/running apps, keyboard, a launcher etc. I sideloaded the following apps:
Chrome Browser
Microsoft Arrow Launcher (I originally used Nova but it was too much a ram hog to be useful)
Multiling Keyboard (I originally used Swiftkey, but it too was taking up too much ram)
WebTube (stripped down youTube frontend)
Soft Keys (so I had a home and back button, the running apps button still doesn't work :'( )
First post so no links ;(
imgur .com/dGAOmoM
This is what it looks like after boot. I may also have an affinity for Amiibos.
imgur .com/uQ8u7js
Classic.
Quick note: This device doesn't support google play services, so no hulu, official youtube, netflix unfortunately. Try as I might I haven't found a solution.
Click to expand...
Click to collapse
This worked, but I couldn't get ADB to work in Windows, I had to go grab my laptop running Deepin Linux and set up ADB on that, but no USB drivers are needed in Linux, so once I set up ADB, it just worked. So I'm hoping that might be the solution for others who are having trouble, just use Linux, it just works. ADB works on the CSR level, so no need for security key. Got CPU-Z on there for any curious about the hardware specs, my model is a DT101-ASA-800
Hi guys!
I'm working on a Car PC software and I'm looking for contributors. You can find the project on github: https://github.com/viktorgino/headunit-desktop
More about the project:
HeadUnit Desktop is a based free and open source software that is intended to be run on computers built into cars. This software is currently under active development and lot of the features are experimental. As of now there are three main features:
Media player with a media library and media scanner
Android Auto™ client
DAB radio (integrating welle.io)
Proposed features:
FM radio
CAN bus sniffer with a customizable profile for each car.
Click to expand...
Click to collapse
Some screenshots of the GUI: http://imgur.com/a/pnrpy
And a screen recording: https://www.youtube.com/watch?v=26EYhQuH-Xs
I'm using the C++ and Qt for this project, the front end is QML.
If you are interested in helping with this project, then PM me here, hit me up on Gitter https://gitter.im/headunit-desktop or drop me an email on [email protected]
Pretty excited about this, wish I could help
very interesting project today I try it on my p9 lite. any help files regarding steering wheel controls and buttons?
This is exactly the type of experience that I was looking for, something that allows AA but also maintains AM/FM radio so this can be used as a replacement to the current stereo.
I've been trying to get this installed, but running into some issues in the instructions.
I have the PI all setup, and now following the instructions here:
I'm stuck on this step:
After you’ve installed Qt add the lib folder its installed in to the library load path, the bin folder to your PATH and the lib/pkgconfig folder to the pkg-config path.
I'm not really sure what it's telling me to do here or how to do it.
Can anyone help?
So i got this up and running, this has a lot of potential.
Hopefully development of it can continue soon.
I have a few questions I'm hoping someone can answer.
Questions on current build
1. How is the progress for the FM radio going? Do you know what hardware requirements will be to use AM/FM?
This was the biggest draw to me, to allow me to use this as a replacement to a standard head unit.
2. With Android Audio, when I push the button to go into AA mode. When I plug my phone in, nothing happens? I have AA installed on my phone and it works on other devices.
3. I have a red box at the bottom of the screen that says 'no valid device found use Null device instead.'
What is this trying to tell me? Message is there regardless if phone is plugged in or not.
4. How do you enable the bluetooth so it can connect to the phone contacts etc?
Features I would like to see:
1. Customization navigation bar.
This will be going in an older car, with old fashion lever type heater controls, so I really don't need the climate control button on the screen. Be nice to be able to swap that out for something else.
Also I don't think DAB radio is available in the US, so that would be another one that I would like to remove. Any plans on HD radio for those in the US?
2. Will this support wireless AA at some point?
3. Suppress the Pi Login/Password screen on boot. It seems if you wait about 20 seconds it skips over it automatically. Would be nice in the settings if there was a way to turn that on/off.
So I think this is almost exactly what I have been looking for as a carpc setup, but I had a couple of questions/suggestions. It would be great if you could customize the "action menu" on the right to open other apps that are installed on the system. Like chrisfromwa said above, I have an older car and have no need for the A/C controls, but would I do have an aftermarket fuel injection system and have tuning software currently running on my Raspberry Pi that I would like to be able to open from the "desktop" environment. Also, while I realize that you can do mapping through Android Auto, it would be great if you could launch a navigation system that is installed on the Pi itself like Navit. That way I could have fully offline maps and navigation via a USB GPS dongle and not have to worry about my phone having a signal to have mapping info.
Ultimately I'm really just looking for a "launcher" of sorts that can do FM radio, navigation, and open my tuning app, but that has a nice interface that is easy to use in a car with the 7" touchscreen I have. This is one of the most promising I have seen and would love it if it could launch other apps from the main screen.
i would like to ask a question, and please know that i mean ABSOLUTELY no disrespect by this, but why build one? I ask because there are many head units that are double din, touchscreen, can play darn near every file known to man, have android auto, can interface easily with your car itself, much less the steering wheel controls (cheap interface built with the molex plugs needed for plug-n-play use. Again, i mean no disrespect as i tried doing this a few years back. I gave up because to do it properly, i found that i would have to pretty much rewrite the kernel so that it could idle when necessary and go into full-on ready in seconds vs a full boot every time. Creating an output section thats worth a damn would also prove to be expensive, which is what inexorably led me back to the pioneers, kenwoods etc etc etc of the world. I guess if youre wanting full, unrestricted access to what android has to offer while driving, that would explain it then. But you can also achieve this with some automated processes in your phone to lie to the deck and tell it that youre not moving etc etc. Anyways, just curious of your reasoning for doing this
Youdoofus said:
i would like to ask a question, and please know that i mean ABSOLUTELY no disrespect by this, but why build one? I ask because there are many head units that are double din, touchscreen, can play darn near every file known to man, have android auto, can interface easily with your car itself, much less the steering wheel controls (cheap interface built with the molex plugs needed for plug-n-play use. Again, i mean no disrespect as i tried doing this a few years back. I gave up because to do it properly, i found that i would have to pretty much rewrite the kernel so that it could idle when necessary and go into full-on ready in seconds vs a full boot every time. Creating an output section thats worth a damn would also prove to be expensive, which is what inexorably led me back to the pioneers, kenwoods etc etc etc of the world. I guess if youre wanting full, unrestricted access to what android has to offer while driving, that would explain it then. But you can also achieve this with some automated processes in your phone to lie to the deck and tell it that youre not moving etc etc. Anyways, just curious of your reasoning for doing this
Click to expand...
Click to collapse
I've built my own and after you see so many people having issues with their official head units, it is nice to know that you have the control and aren't at the mercy of a car manufacturer or company. Also, I can use it to play retro games and more. Plus I have a unique dashboard that I have helped design in some ways. Honestly I've tried this project and while it was heading in a good direction there wasn't enough for me to use it as it is currently. I have something else and don't have to pay for like Openauto pro. It's called OpenDash and while it functions as is, it is continuously adding functionality and customizations that you can't find in anything commercial.
talon_dgnr8 said:
I've built my own and after you see so many people having issues with their official head units, it is nice to know that you have the control and aren't at the mercy of a car manufacturer or company. Also, I can use it to play retro games and more. Plus I have a unique dashboard that I have helped design in some ways. Honestly I've tried this project and while it was heading in a good direction there wasn't enough for me to use it as it is currently. I have something else and don't have to pay for like Openauto pro. It's called OpenDash and while it functions as is, it is continuously adding functionality and customizations that you can't find in anything commercial.
Click to expand...
Click to collapse
Right on. What model car?
Sorry if this is in the wrong location, if it is please let me know where to move it.
So the story goes I found an Amiibo Kiosk at my apartment dumpster. It was originally designed to run a single app meant to be interacted with by customers and a settings app meant to be accessed by a technician and nothing more. Using adb I managed to get into the /actual/ android settings menu instead of the custom "CSR" one that you can access by pushing some buttons on the back and perform a factory reset. If you need more information I documented everything I did here: https://forum.xda-developers.com/android/help/commercial-grade-android-tablet-issues-t3594279 the post is at the very bottom.
It's a giant 18.5 inch 720p commercial tablet from DUCO meant to be mounted in customer-service kiosks: (product page) http://www.ducotech.com/product/18-5-android-based-720p-hi-def-lcd-media-player/
I sideloaded arrow launcher, aosp keyboard, google chrome, and a stripped-down youtube front-end so it can be used as an actual tablet. Unfortunately Google Play services in not supported on this device (although I could probably spoof it as an officially supported device to make it work, but I want to fix my biggest problem first.)
My problem is that after a pretty consistent amount of time it unceremoniously black-screens with a pop from the speakers, then starts back up. I logcatted it and it shows nothing but wlan polls and ram cleanup before it shuts down, however I'll include it anyway since I'm sure that'll be the first thing anybody asks for.
My best guess is that there is some kernel watchdog resetting it since it's not being tickled by DUCO's CSR app that is normally installed when the system is sitting on a salesfloor.
Is there any way to check for this and/or disable it?
Additional info:
Running Android 4.1.1
Sun4i architecture
I attempted to install Busybox, but the tablet resets itself before Busybox can finish installation.
Logcat is here since the logcat.txt is a few kb too big to upload.
How did you get PowerShell to accept the line code. It errors everytime I type the codes you are recommending
Hello. First time posting here - please forgive if wrong section.
Trying to use android boxes as hardware to run client android app for a security camera system I install quite regularly.
The app they have for iphones, macs, windows, android phones and tablets all work quite well, however, recently I thought "hey, why not use android boxes instead of $300+ computers to use as auxiliary displays and save customers some money".
It's a great idea I thought. Well... Turns out, I'm always wrong about Something...
So i've tried this on Android 7, it installed, but I can't get passed some screens like the "accept" and "Skip" screens.
On Android 9, I can install it as well, but I can't do things like get into the menu, scroll down certain areas.
Basically, it doesn't let me use a mouse and use it as a touch device.
Now, where I've had some better luck was using my Nvidia Shield. That one worked quite well, but again with this one, I couldn't "Drag" menus or even use a keyboard to see next screens or down menus.
I'm not going to get into a LOT more details, because I'm sure if somebody here is really going to help, they'll test this app to see what I mean. It's just REALLY weird!
Anyway, the app name is Provisioncam2.
I'd love to test things out with someone who may know more about android OS and these boxes. Please hit me up.
Good time of the day! It's cool that there are such applications. I myself use a similar application from ajax, which was so let's say bundled with this security system. I really liked the functionality. You can set up sensors and remotely monitor the apartment online. This is a very innovative solution just for the 21st century. Not like all the wired alarms from the last century, right? I'm always for progress! Therefore, I rate this app highly regardless of how well it works. Anyways, mine is better.