high im new to the vibrant flashing. ive been here for awhile started with g1 then to nexus one now vibrant. ok i rooted n flashed rom and phone was running great. i was running axura 2.2.7.1 and i came acrossed this vodoo kernel http://forum.xda-developers.com/showthread.php?t=870480. And i flashed it from the sgs flash kernal app and when it rebooted it said some bout no rom on partion and wouldnt boot. so i went to recovery to nandroid and my intire internal sd was wiped clean. so i data reset and tried flashing a rom and get this....
Formatting system...
formatting cache....
formatting datadata...
formating data....
E:can't mount /dev/block/mmcblk0p2
(file exists)
error mounting /data/!
skiping format...
deleting files....
deleting files...
deleting files...
E:can't mount /dev/block/mmcblk0p2
(file exists)
copying files...
copying files...
E:can't mount /dev/block/mmcblk0p2
(file exists)
E:can't mount data:
E: failure at line 13:
copy_dir PACKAGE:data DATA:
installation abort
and when i boot the phone it gets stuck on the vibrant boot and i think it says convert system partion.
ive never fully bricked a phone before is this what a full brick is??? can some one please help me who knows this stuff better and if you can fix it i will donate very generiously if someone will take the time to help thank you for your time.
Sounds like a case of odin and restarting. Pretty easy think the odin stuff is a sticky in the general portion of vibrant section. It's almost impossible to f up this phone beyond fixing.
Sent from my SGH-T959 using XDA App
Gibsonusa said:
Sounds like a case of odin and restarting. Pretty easy think the odin stuff is a sticky in the general portion of vibrant section. It's almost impossible to f up this phone beyond fixing.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
ok yeah when i came from the nexus one i saw the odin and vodoo stuff but stupid me didnt research it any figured everything was like nexus... wow was i wrong things little different on here ill look into the odin thing and if i can get it back to runinng i will donate to you if able. if i cant would you be willing to help me further. im not a noob just its lot different from the nexus one.
how do i get odin from herehttp://forum.xda-developers.com/showthread.php?t=848737 i download the one that says odin but its just a rar file and dont do any thing. how do i put the files with it?
did you even try to extract the one that you download?
iynfynity said:
did you even try to extract the one that you download?
Click to expand...
Click to collapse
for some reason on the rar file its not letting me have an extcart option sorry if all this is a lil dumb not the biggest comp. person. screen shot attached
kamikazimonky said:
for some reason on the rar file its not letting me have an extcart option sorry if all this is a lil dumb not the biggest comp. person. screen shot attached
Click to expand...
Click to collapse
you need winrar in order to open rar files. not sure if 7zip can do it, but it's worth a try (seeing as it's free and all).
Oniyuri said:
you need winrar in order to open rar files. not sure if 7zip can do it, but it's worth a try (seeing as it's free and all).
Click to expand...
Click to collapse
7zip worked fine and i put them in and click start and does nothing n i am in download screen on vibrant.
kamikazimonky said:
7zip worked fine and i put them in and click start and does nothing n i am in download screen on vibrant.
Click to expand...
Click to collapse
not sure what is up but this might help
http://www.youtube.com/watch?v=KyAIUOYufrU
Part 2: http://www.youtube.com/watch?v=33I-aNCypVM
Your gonna need ODIN and eugenes froyo that doesnt brick
You will also need 512.pit and JFD.tar file .. you can get these via the Bible sticky ..eugenes froyo is on his site..
Try to see if you can get into Download Mode:
Pull everything out ..battery, sim, scdard
Open ODIN and leave it on your PC
Plug the USB cable into the PC
Put the battery back in
Hold down on both of the volume buttons
Plug the usb into your phone...keep holding the buttons
It should go into D/L mode....we hope..
If it gets that far..make sure you see a yellow COM port in ODIN
Not sure with eugenes froyo but 512.pit goes in the PIT line
eugenes froyo.tar goes in the PDA line
I think you may need Repartition checked in your case to get the filesystem back but if his site says not to then dont.
Hit start
This is not a daily driver ROM...just to allow you to re ODIN
If it works...again we hope... You need to go back into D/L mode
check for COM port
add the 512.pit & this time the JFD.tar to PDA
uncheck repartition and hit start
and hopefully you will get back to stock 2.1
one question did you repartiton your internal sd with rom manager or just voodoo it ?
jmcghee1973 said:
Your gonna need ODIN and eugenes froyo that doesnt brick
You will also need 512.pit and JFD.tar file .. you can get these via the Bible sticky ..eugenes froyo is on his site..
Try to see if you can get into Download Mode:
Pull everything out ..battery, sim, scdard
Open ODIN and leave it on your PC
Plug the USB cable into the PC
Put the battery back in
Hold down on both of the volume buttons
Plug the usb into your phone...keep holding the buttons
It should go into D/L mode....we hope..
If it gets that far..make sure you see a yellow COM port in ODIN
Not sure with eugenes froyo but 512.pit goes in the PIT line
eugenes froyo.tar goes in the PDA line
I think you may need Repartition checked in your case to get the filesystem back but if his site says not to then dont.
Hit start
This is not a daily driver ROM...just to allow you to re ODIN
If it works...again we hope... You need to go back into D/L mode
check for COM port
add the 512.pit & this time the JFD.tar to PDA
uncheck repartition and hit start
and hopefully you will get back to stock 2.1
Click to expand...
Click to collapse
im having trouble finding the eugenes froyo.tar file anywhere.
edit: i believe i found it at the right place will try it out http://eb-productions.net/vibrant/vibrant-unofficial-tmo-2-2.html
bartek25 said:
one question did you repartiton your internal sd with rom manager or just voodoo it ?
Click to expand...
Click to collapse
just vodooed it never mest with partitions with the card
Also not sure what version of odin you might be using. I used odin v1 and it wouldn't work for me after more looking around read that v1.7 was the one that would work. I think that one is in the q&a stickies says like root odin stuff like that. Also found that the pit that ended in 12 worked better than the one that ended in 13. Fact I also couldn't get 13 to work either.
Sent from my SGH-T959 using XDA App
Gibsonusa said:
Also not sure what version of odin you might be using. I used odin v1 and it wouldn't work for me after more looking around read that v1.7 was the one that would work. I think that one is in the q&a stickies says like root odin stuff like that. Also found that the pit that ended in 12 worked better than the one that ended in 13. Fact I also couldn't get 13 to work either.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
well both 1.0 or 1.7 neither reconize my phone now for some reason and windows says im missing dirver s or some that hardware wasnt installed right. man this is getting so frustating and i love this phone
Ill get on computer in a minute and tey to peovide you some links
Sent from my SGH-T959 using XDA App
Samsung drivers for your computer so it picks up the phone.(just read the things to click i had a ***** of a time finding it and thought that you had to buy the software but you dont im just not that great at looking at what i need to be clicking on.)
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x86.shtml
A nice little how to unfunk your vibrant and how to get it into dl mode
http://forum.xda-developers.com/showthread.php?t=848737
Odin 1.7 rar files
http://forum.xda-developers.com/showpost.php?p=8863820&postcount=138
(sorry if you have this stuff but these are the steps that i went threw when i had boned my phone pretty hard)
Eugene 2.2 stock odin thingy
dont use the odin that comes with this btw i know i didnt or i think i tried and it was dumb and wouldnt work.
http://www.mediafire.com/?cb8vpwob8hz6yxv
alright man so go step by step unpack the sammy drivers and open odin 1.7 then plug in your phone SHOULD find your phone after you get those drivers installed on your comp. any port will do when odin finds your phone.
put the 512 pit file in the pit spot (uncheck repartition if it is checked)
then put the tar file or what not in the tar spot and click start it SHOULD only take about 3-5 minutes depending think it took me less then two but everyone seems to have different times i guess.
When you are back to stock let it sit a minute or 5 reboot to work out whatever kinks it might have then find you a rom and flash. FOLLOW THE DEV INSTRUCTION ON WHATEVER ROM YOU PICK. hehe pm me if you still have problems, shouldnt though
Related
****THIS POST IS NOT FOR BEGINNERS*****READ COMPLETELY BEFORE PROCEEDING*********************************************************************
I had to do this because I had flashed wrong thing in ODIN, and I had NO other choice....I did not do this by choice but this REALLY WORKS and I THINK ITS GREAT I was taking a RISK and I understood the consequences....I Could have ended up with a BRICKED PHONE, but that was not to be. I am VERY VERY happy with the results.
I WANT TO SAY THAT ALOT OF THE MATERIAL IN THIS POST WAS USED FROM LINKS AND POSTS FROM XDA WEBSITE THEY ARE A GREAT FORUM AND ANYONE DOING THIS SHOULD BECOME A MEMBER OF "XDA" AND "MOD A DROID"....THANK YOU XDA AND ALL THE DEV'S FOR ALL YOUR WORK ALL THE MATERIAL IN THIS POST I WILL PUT LINKS TO PAGES AT THE BOTTOM FROM PAGES USED "BUT I HAVE CHANGED SOME OF THE STEPS SO FOLLOW THIS POSTS INSTRUCTIONS ON HOW TO DO THIS PROCEDURE"....TO FASCINATE YOUR MESMERIZE.
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
******************************READ ENTIRE POST BEFORE YOU DO ANYTHING TO YOUR PHONE********************************************************
First -You NEED to download everything and have it on your PC ready to use !!! DO NOT START WITHOUT DOING THIS.
Second -You NEED to backup your contacts. DO NOT USE MY CONTACTS BACKUP !!! You will not have that app yet so there is no way to restore them. I used an app. called LOOKOUT from the market. You have to install on phone and sign-up on LOOKOUTS web sight and make sure you run a backup of contacts, as well you need to move any apps you want to your PC or SD card. I recommend the PC to leave space on SD Card....Have at least 1GB free on card to be plenty safe.
Ok heres the deal this may or may not be something you will want to do to your phone....DO THIS AT YOUR OWN RISK....This is what I did to turn my phone into a Fascinate even though I was a US Cellular Mesmerize. I WARN THIS WORKS BUT THERE ARE PROS AND CONS TO DOING THIS. To date there is NO, I REPEAT NO WAY to date to go back from this procedure to a MESMERIZE. Someone may have a way but I have not seen or found it yet. I do believe it is only a matter of time before the DEV'S come up with a restore and then you could go back to stock. SUMMARY= THERE IS NO WAY TO DATE TO REVERSE THIS PROCEDURE !!! DO AT OWN RISK !!!
First thing you need to do is download ROM MANAGER from the market and put the App on the SD Card for later install. Next Download this file here>>>>
http://dl.dropbox.com/u/458252/Fascinate Files/update.zip ---- to the ROOT of your SD Card it is a file called "UPDATE.ZIP" "DO NOT RENAME" put that on there and do not remove it you need it do a restore to access Clockwork later. This is where you need to have this located on SD. ---- /sdcard/update.zip.
Second you need to download...DI01 update with root and busybox here>>>>http://www.megaupload.com/?d=S7IFCKX0
Important:"DO NOT RENAME" and DO NOT put this on the root of your sdcard as /sdcard/update.zip. That's where clockwork mod lives. PUT IN FOLDER you name what ever on SD Card. You will need to go here later in the post to install this in step#12
/sdcard/"FOLDER YOU NAME"/update.zip.
Next thing you need the samsung drivers for windows for this to work. Those can be found on this thread: http://forum.xda-developers.com/showthread.php?t=779238 [this page has a good write up on how to down load and install.] or direct link BELOW>>>> Thank you DIRRK XDA member.
Download and Install Samsung Drivers to your WINDOWS PC this whole procedure was done on a WINDOWS 7 PC. WARNING: You need different drivers for mac/Linux and I do not know where to get them as I have only a WINDOWS PC.
64bit:
http://www.wikifilez.com/root files/epic4g/usb_drivers_GalaxyS_x64.zip
32bit:
http://www.wikifilez.com/root files/epic4g/SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe
*************************AFTER THIS POINT THERE IS NO WAY TO GO BACK PROCEED WITH CAUTION !!! ************************************************
For this next step THANK YOU FALLINGUP SENIOR MEMBER XDA....I have altered his orig. post to give more detail for people, using ODIN please follow my post to do this !!
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
****************************FROM HERE ON ONLY FOLLOW INSTRUCTIONS IN THIS POST TO DO THIS***************************************************
**************************GET ODIN AND ALL FILES NEEDED BEFORE PROCEEDING DOWNLOAD TO PC FOR USE*********************************************
LINKS ATTACHED TO FILES BELOW.
Next download ODIN and run. Make sure ODIN sees your phone by putting phone in DOWNLOAD MODE by pulling battery LEAVE OUT. Run ODIN. HOLD VOL DOWN AND PLUG INTO PC with cable that came with phone, a yellow rectangle with id# means ODIN sees it----once this is connected DO NOT UNPLUG UNTIL ODIN IS FINISHED. If you do you will see a PC connected to a phone by a triangle this means you prematurely unplugged and you will need to re-flash whichever step failed to flash. It is only OK to unplug once a step is finished and Odin says reset in blue, but you do not need to you can load the next file and go. But I've got steps below so if you are here you didn't read entire post. CAREFUL Now follow step 4.1
ONLY FLASH ONE OF THESE AT A TIME. START WITH THE /SYSTEM ODIN AND WORK YOUR WAY DOWN THE LIST.---You do not just flash the pit file it is used with the other files like system,kernel,and recovery. ****FILES BELOW STEPS****READ ENTIRE POST BEFORE USING ODIN AND KNOW THE RISKS*************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
************************ONCE YOU FLASH ANYTHING YOU CAN NOT GO BACK YOU WILL BRICK YOUR PHONE**********************************************
Steps:
1. Pull battery from device
2. Open Odin on desktop
3. Hold volume down button and plug device into computer-This will place the device into download mode
4. Verify device shows up in Odin ---This should be a yellow rectangle with id #----As well the phone will also say download mode with a yellow triangle on it
4.1: Select PIT button
4.2: Select PIT file downloaded from this post and load it into Odin. (I Never loaded the pit file when I did this in Odin and worked fine for me but from what I understand it is good practice to do so to Quote a post ---"You need to load the pit file into Odin---Missing these steps usually results in major FC hell issues." Thanks PHOENIXPATH senior member XDA
4.1: To Flash the "Stock-i500-VZW-System.tar.md5" file you,
5. Click "PDA" button in Odin ---MAKE SURE YOU ONLY USE PDA "DO NOT USE PHONE" YOU HAVE BEEN WARNED!!
6. Select "Stock-i500-VZW-System.tar.md5" from where you downloaded it
7. Click "Start" This will reboot your phone when complete. This flashes both the kernel and the recovery partition to enable you to flash update.zips signed with test keys. ---When done ODIN should say reset leave pit alone and load next file of the three needed to be flashed.(YOU MAY NEED TO UNPLUG and REDO STEPS 1-4 AGAIN)and jump/proceed to step#8 and continue on.
8. Flash "Stock-i500-VZW-Kernel.tar.md5" when done says reset move to next step.
8.1 Flash "Stock-i500-VZW-Recovery.tar.md5" when done says reset move to next step.
9. Flash "CWMrecovery.tar" ----THANK YOU JT1134 Senior member XDA
10. Replace the battery and Boot in to Recovery= HOLD VOL UP + VOL DOWN same time and PRESS POWER, all three need to be pushed to enter recovery.
11. In recovery navigate UP=vol. up/ DOWN=vol. down /ENTER=home key----You need to select "apply sdcard:UPDATE.ZIP" on ROOT of SD Card to enter the next recovery screen.
12.In this recovery "CLOCKWORK RECOVERY" navigation is different UP/DOWN=SAME but ENTER=power key---you need to navigate to the "ADVANCED" and then apply "WIPE DALVIK CACHE" when done select "REBOOT RECOVERY" (brings you to stock recovery) navigate to "WIPE DATA/FACTORY RESET" once done go to "APPLY SDCARD UPDATE.ZIP" then "INSTALL ZIP FROM SD CARD" once there select "CHOOSE ZIP FROM SD CARD" navigate to the folder "YOU GAVE A NAME TO" and inside is the 2nd "UPDATE.ZIP" you put there and select it...wait until it is finnished...once done.."GO BACK"and"GO BACK AGAIN" then select "REBOOT SYSTEM NOW"
13. Enjoy your stock Fascinate phone with DI01 update and root and busybox . You still will have phone call ability but a couple of apps like contacts backup and vcast are "Verizon" and we at US Cellular can not use. But once you install custom ROMS in Rom Manager you will be able to get roms with them removed or get apps to shut down/freeze them and sub. them out.
Alot of the ROMS have apps taken from the MESMERIZE so this is not really an issue at least not to me.
INSTALL ROM MANAGER FROM SD CARD OR LOAD TO PHONE FROM PC AND INSTALL ON PHONE......
NOW GO INTO ROM MANAGER AND "BACKUP CURRENT ROM" so any changes made from here you can get back to this point.....once done you can NOW LOAD CUSTOM ROMS,KERNELS AND ENJOY THE HELL OUT OF YOUR "FASCINATED-MESMERIZE"
Buy the latest PRO version of ROM MANAGER and use to upgrade kernels thru clockwork or load roms in rom manager......
These are the files to put in ODIN PDA Flashing one at a time with the PIT file. ONLY USE PIT AND PDA......You have been warned again. PS-NEVER DUMP IN ODIN,and do not check anything but PDA AND PIT...there are things checked in ODIN when it loads leave them alone.
Download: "To PC for use in ODIN before you begin"
Odin: http://dl.dropbox.com/u/458252/Odin Files/Odin3 v1.3.exe -This is program to use to flash.
Odin Restore file for system: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-System.tar.md5 -----THIS IS FIRST.
Odin Restore file for kernel: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Kernel.tar.md5 -----THIS IS SECOND.
Odin Restore file for recovery: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-Recovery.tar.md5 ----THIS IS THIRD.---this is just to be safe
Odin Clockwork recovery file: http://dl.dropbox.com/u/458252/CWMrecovery.tar ------THIS IS FOURTH ONE I FLASHED.
PIT file for use in Odin Restores: http://dl.dropbox.com/u/458252/Odin Files/Stock-i500-VZW-pit.pit ----THIS IS PIT TO USE "WITH" ABOVE FILES.
*************************THANK YOU TO XDA WITHOUT YOU THIS WOULD NOT BE POSSIBLE**********************************************************
LINKS REFERENCED FROM XDA's WEBSITE THANK YOU AGAIN XDA MEMBERS !!! YOU GUYS ROCK !!!
http://forum.xda-developers.com/forumdisplay.php?f=721
http://forum.xda-developers.com/showthread.php?t=782204
http://forum.xda-developers.com/showthread.php?t=790004
http://forum.xda-developers.com/showthread.php?t=790085
http://forum.xda-developers.com/showthread.php?t=779238
http://forum.xda-developers.com/showthread.php?t=789868
http://forum.xda-developers.com/showthread.php?t=788099
IF YOU LIKE THIS LEAVE ME SOME FEED BACK PLEASE.....................THANKS AND ENJOY........ANDROIDMAN
EXTRA NOTE: DO NOT TRY THIS WITH ANYTHING OTHER THAN THE SCH I-500 MESMERIZE......AS IT HAS ONLY BEEN DONE ON THAT MODEL..........
FLASHING ANY OTHER GALAXY S VARIANTS ODIN FILES WILL BRICK YOUR PHONE !!!!!!!!!
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
danrosinski said:
Because There is no way mainstream to use clockwork or rom manager. Hense you can only root, thats it without this.
Click to expand...
Click to collapse
Correct, No Way of FLashing ROM MANAGER so you can apply the first update.zip
You Can Flash but when you apply the update to a MESMERIZE you get E:signature verify fail -hence No Clockwork, NO Roms. No Way to Customize
jtsharps said:
My thoughts exactly?! I thought people that had a fascinate were wishing it wasn't so fascinatish?
Whatever floats your boat I guess.
JT
Click to expand...
Click to collapse
When I orig. did this I had No Choice, This is something that I had to do...and Thankfully Worked just thought I would Share because now I can Use CLOCKWORKMOD and ROM MANAGER and customize my phone as if it were a Fasinate.
lowkee said:
How odd.
Why would you want to make your phone a fascinate? Most of us went the other way in order to debing.
Sent from my SCH-I500
Click to expand...
Click to collapse
Did you read the entire post I had NO choice as stated in the beginning....Thank You.
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
s44 said:
Can't link it now but doesn't Koush have a post on compiling Clockwork for new phones?
Sent from my Voodoo-powered Fascinate with XDA
Click to expand...
Click to collapse
If he dose I havent seen it can you throw that up for everyone?
androidman78 said:
If he dose I havent seen it can you throw that up for everyone?
Click to expand...
Click to collapse
Now I'm home, so here's the post.
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
What are the other possible applications for this?
PhoenixPath said:
Awesome job. Glad you got it working. Now all we need its a way to reverse these steps so us fascinate users can go to 'stock' mesmerize.
(...or better yet, stock android...)
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Yea, was worried origionally that I was screwed but its a draw/Im happy its only a matter of time before the Fasinate users will be able to go stock mesmerize because this SHOULD?see no reason why not, go both ways.
I know that Sprint is doing an I-500 can we go there too, at least for apps and features. I wonder? And what about the 4G...USC and VZW are 3G would switching/Moding give any advantages I think NOT but still wonder how much of that speed is controled by phone software. I really think its all the network but not 100% sure.
Post above looks interesting the one for Koush's site am checking it out now....Thanks
Sent from my Stupid Fast Blackhole of a Fasinated-Mesmerize
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
PhoenixPath said:
Just need the odin files for the mesmerize.
Sent from my stupidfast blackish hole...
Click to expand...
Click to collapse
Got any open space to host?
It's called dropbox.
PhoenixPath said:
It's called dropbox.
Click to expand...
Click to collapse
3 hours to upload that small of a file... Dropbox blows for something like that. We'll see.
So i have clockwork working on my mesmerize and running jts super clean but does this allow you to use all facinate roms and kernels on the mesmerize? if so i wanna try this
so if i did this and i used clockwork to perform a backup before i did this could i possibly just restore that backup and have it be a mesmerize again?
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
tweakymattman said:
and it was said there are pros and cons of doing this? the pros are great but what are the cons besides not being able to go back to stock mesmerize????
Click to expand...
Click to collapse
I can't get mms working....
Sent from my SCH-I500 using Tapatalk
This makes about 100 times more sense.
http://androidforums.com/behold-2-all-things-root/54424-creating-custom-roms-backups-odin.html
Okay. So I pushed Axura final onto my phones internal sd card and booted into recovery mode. The damned Axura copy ( it downloaded properly via google chrome, no errors) had some issue with it and DID NOT install properly. I tried again and again to make it work, did not load flash from voodoo eclair 2.1 to axura which is 2.2.
Now I want to use ODIN and come back.
I get into download mode BEAUTIFULLY using youtubes """Samsung Vibrant download mode; Corntez" .
and then load Odin, load pit file, and the tar/jar file. detected as COM 6 Odin says "added" . then run it. RUNS perfectly. firmware update start; cache.rfs;modem.bin;factoryfs.rfs; and all, and the blue bar finished completely.
Then restarts, "VIBRANT" says "data wiping failed " , everything else succeeds...lots of small writing....restart' VIBRANT" ; then Samsung Galaxy S shiny logo.
Now.....the plot thickens and my vibrant does not move forward. Black, black screen.
If I touch the bottom touch keys---viz, home etc...they light up fine. But the screen. the beautiful screen, remains as dark as Lord Voldemorts heart.
What to do??
I forgot to mention that I moved from a forward port on my thinkpad to an aft port )); and the COM4 in ODIN changed to COM 6 , promptly.
Odin is causing some issues. seems like. Any suggestions and links for newer, better versions of the T mobile stock firmware.????
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
houston123 said:
Need I mention that I had voodoo before I tried to put Axura on? I did.
Thanks for all the help, in anticipation,
cheers
Click to expand...
Click to collapse
Houston we have a problem. Voodoo MUST be disabled BEFORE you flash. There are plenty of info on the board on how to do this. Then ODIN to stock then FLASH. Not all ROM's need a lag fix, some just run smooth!
my phone is doing the same thing but all i did was hit the voodoo button that was available in the oclf app and it went dumb the women counted down and said complete after a while and then it stuck on the vibrant samsung screen. i flash with stock rom and now its doing what this guys phone is doing please help us
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
houston123 said:
Hey, yes, I read somewhere, that voodoo needs to be disabled. I did not do that, I had issues doing that.
Click to expand...
Click to collapse
For the dear love of [deity]/self-sufficiency, go read how to solve your problem
(You need to flash Eugene's "froyo that does not brick." Then flash whichever firmware you want.)
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
houston123 said:
Can someone post a link to Eugenes Froyo that does not brick please. Eugene himself has removed all support. Also, I found a zip file for Eugene somewher and NOT a tar or whateva file type ODIN uses to restore firmware.
Click to expand...
Click to collapse
http://eb-productions.proboards.com/index.cgi?board=samsungsgs
I have tried but doesn't work for me. Unfortunatly I too did not disable voodoo before flashing and now I am stuck and can not get into download screen. I guess I will have to take my stuff to a cell phone repair since I have ran out of options.
got eugenes software. Now I am going to try out this:
""""
ok so here is what you have to do:
1. download odin, froyo that doesn't brick, and 2.1 true stock
2. go to download mode, flash the pit and tar file from the froyo that doesn't brick (DON'T RE-PARTITION!)
3. it will boot into recovery and error out, DONT PANIC, that is what is supposed to happen
4. remove battery (from phone) and usb from phone and computer
5. put battery back in, access odin and download mode
6. flash the pit and tar file from the true 2.1 stock (RE-PARTITION THIS TIME!)
7. if done successfully, your phone software will like when you just took it out of the box!"""
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
houston123 said:
If all this does not work out, I have the 6 $ a month insurance from T Mobile---how do I use that? They might just say **** off, you screwed with the ROM and bricked the phone! Should I told them that someone flicked at Swing dance class.....instead of " I bricked it" sorry!!!!
Your opinions on this???
Click to expand...
Click to collapse
My opinion on this is not to worry unless it doesn't work. But since you know how to use Odin and your phone can get into download mode okay, it should work.
With the insurance there is a hefty copay. But you should be fine.
So I went to Odin my phone back to stock JI6 in Odin and I used the tar and pit file and select re-partition to wipe everything. Everything went fine and it rebooted, but now it brings me to the Recovery menu and says:
e:Can't mount /dev/block/st110 (Invalid argument"
E:copy_dbdata_media:Can't mount DBDATE:
copy default media content failed.
I've tried to reboot into download mode via the keys, and through adb, but I can't get there to install the OS...
Any help?
Thanks!
sano614 said:
So I went to Odin my phone back to stock JI6 in Odin and I used the tar and pit file and select re-partition to wipe everything. Everything went fine and it rebooted, but now it brings me to the Recovery menu and says:
e:Can't mount /dev/block/st110 (Invalid argument"
E:copy_dbdata_media:Can't mount DBDATE:
copy default media content failed.
I've tried to reboot into download mode via the keys, and through adb, but I can't get there to install the OS...
Any help?
Thanks!
Click to expand...
Click to collapse
1.) Make sure you are using something that is NOT 'Odin3 1.0' the best versions are 'Odin3 1.3 & Odin3 1.7' IMO
2.) Make sure you are using JFD Stock to odin back.
Master™ said:
1.) Make sure you are using something that is NOT 'Odin3 1.0' the best versions are 'Odin3 1.3 & Odin3 1.7' IMO
2.) Make sure you are using JFD Stock to odin back.
Click to expand...
Click to collapse
I am using Odin3 v1.30.
But how am I going to get JI6 or even JFD on the phone? It won't start up, just keeps going to this menu where my only options are reboot system now, reinstall packages (does nothing) delete all user data and delete cache data..
sano614 said:
I am using Odin3 v1.30.
But how am I going to get JI6 or even JFD on the phone? It won't start up, just keeps going to this menu where my only options are reboot system now, reinstall packages (does nothing) delete all user data and delete cache data..
Click to expand...
Click to collapse
You don't reinstall packages.
Just use JFD that is the one that is most likely to work. Not all work for everyone.
JI6 doesn't work for me.
To use Odin, you go into download mode. You don't use recovery.
Master™ said:
You don't reinstall packages.
Just use JFD that is the one that is most likely to work. Not all work for everyone.
JI6 doesn't work for me.
To use Odin, you go into download mode. You don't use recovery.
Click to expand...
Click to collapse
That's the thing, I can't get into download... Neither the hardware buttons or adb will get me there.. I type adb reboot download, and it takes me to the menu with the above options I mentioned.
sano614 said:
That's the thing, I can't get into download... Neither the hardware buttons or adb will get me there.. I type adb reboot download, and it takes me to the menu with the above options I mentioned.
Click to expand...
Click to collapse
So you are hardware locked? The following MAY or MAY NOT work...
1.) Turn off your phone, remove battery/sim/micro SD
2.) Press & Hold the VOL UP+VOL DOWN
3.) Plug your phone into your computer (Keep holding those buttons)
4.) Download mode should pop up.
Master™ said:
So you are hardware locked? The following MAY or MAY NOT work...
1.) Turn off your phone, remove battery/sim/micro SD
2.) Press & Hold the VOL UP+VOL DOWN
3.) Plug your phone into your computer (Keep holding those buttons)
4.) Download mode should pop up.
Click to expand...
Click to collapse
I shouldn't be hardware locked, I flashed the file to get rid of the hardware lock before I used Odin earlier and was able to get into Recovery via the buttons (didn't try download though.. DOH!)
I was able to get into download mode now, though, and am flashing JI6 while JFD downloads (very slowly). JI6 finished and same error... Will wait for JFD to be done.
Thank you very much, Master. Merry Christmas.
I'm all set now. Thank you for all your help, Master.
how did you get the phone running again, i mean i can go to the download screen, but after any update I still recieve the same recovery screen with error.......... tried so many things none of them work, what to do?
jaiiscool said:
how did you get the phone running again, i mean i can go to the download screen, but after any update I still recieve the same recovery screen with error.......... tried so many things none of them work, what to do?
Click to expand...
Click to collapse
What are you trying to flash? I had to use Odin to flash JFD, not JI6 as that just kept sending me to that same recovery screen with the error.
sano614 said:
What are you trying to flash? I had to use Odin to flash JFD, not JI6 as that just kept sending me to that same recovery screen with the error.
Click to expand...
Click to collapse
I have a Galaxy S with this error, I am trying to flash the DDJP6 firmware with ODIN, I had checked the repartition by mistake and got this error, don't know what to do now.
Hello everyone, if your reading this you likely have the error mentioned above. Recently, a friend of mine came to me with this same problem. I looked long n hard and every link I found was broken. Every odin file I needed was removed. I even noticed that eugene kindly took down his odin to stock package...that was pretty cool of him At any rate, I still had eugenes odin to froyo zip luckily, I tried flashing this normaly thru odin and got the same error. What ended up working for my buddys phone was, using eugenes odin package and putting a check in "re-format" in odin. That fixed it right up. If your having the same errors, please feel free to contact me. Id be happy to link you or do anything else in power to help. This worked like a champ! Good luck. If this helped ya, please feel free to hit my thanks button. I only have 3!
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
EricDET said:
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
Click to expand...
Click to collapse
Nope, nothing to do with bootloaders. It has to do with jfd being the only realeased odin package that contains dbdata.rfs of the .tar. None of the other ones do.
Sent from my SGH-T959 using XDA App
I went to partition my sd card through rom manager, I have all the files on my computer (all different versions since November). It went into recovery, mounted sd, was formatting and next thing I knew it is stuck on the overstocked logo. I am running Trigger 3.0 & flashed in overstocked (through rom manager) and themed with a splash of color with other modifications.
The thing is, is that I also have the vibrant galaxy s 4g and was using the 16gb sd for both until my 32 came in and realized, not a good idea. So until the 32 came in I decided to just work on this phone but wanted to get any signs of the 4g off this phone so was cleaning it up and now here I am.....
Read the threads here and have gotten into the download mode, with nothing to download but it goes right back to the "overstocked" logo or bouncing to the "vibrant" logo and battery sign.
Any suggestions would be greatly appreciated.
EricDET said:
JFD is the only one that carries all the necessary files for the check-repartition ODIN install...
Something to do with flashing both bootloaders.
Click to expand...
Click to collapse
I used Eugene_2E_JK2_Froyo.tar.md5, and s1_odin_20100512.pit. I checked re-partition and left F. reset time and auto reboot checked. This solved the e:Can't mount /dev/block/st110 error. Idk if this will work for everyone, but using the exact same files but without re-partition checked left the same error, checking it fixed the error. Just thought Id share my results because that can be a very frustrating error which in my friends case caused fc's all over the place, while booting up and a bunch of apps as well.
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
dude that's not even close to a brick as the phone is still responsive somehow..
do this:
1. pull out battery wait 5-10secs
2. connect USB to computer and phone
3. hold down the vol +/- buttons
4. plug in battery
5. you should be in download mode now
6. do what you gotta do with ODIN
good luck
Dont use that method to get to DL mode . Do it this way . First turn off your phone , then plug the usb cable into your computer ONLY . Next hold both volume buttons and plug the micro usb into your phone . Also use odin v1.3 and flash the rom of your preference .
Edit : xtone beat me to the punch
trill12 said:
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
Click to expand...
Click to collapse
Yes using ROM Manager to repartition your phone will create the "soft-brick" you are experiencing. But as one person has already noted, this can pretty much be recovered using ODIN.
Definitely follow the advice given in Posts 2 and 3 of this thread to get into Download mode. If you're not getting the desired results using ODIN, what settings are you using? For example, what are the names of the .pit and .tar files you are using? Did you check or leave unchecked the "re-partition" option?
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
trill12 said:
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
Click to expand...
Click to collapse
What ROM did you flash. You might want to perform a factory reset and then flash the stock JFD ROM and see if that fixes your problem.
Good luck.
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
blizzard1017 said:
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
Click to expand...
Click to collapse
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Just get to DL mode as xtone and I stated in post 2 & 3 . Then flashed to JFD with odin v1.3 and click the repartition box in odin and you'll be fine .
Sent from my SGH-T959 using XDA App
I had this problem for the last two days, but I found a way to fix it thanks to a user (whom I don't know the name of)
I did this to go back to stock firmware (JFD), make sure you have that downloaded.
Look for Eugene's Galaxy S Froyo PDA, for the i9000, not the Vibrant. Flash it through Odin with the 512 pit file. It's not going to boot up but take you to recovery mode instead, and it's going to remap your Volume buttons, but you can still get into DL mode (up is now down, and vice versa but whatever)
Now Odin back to stock, using the same 512 pit and there you go! Should boot up with no problem. Now you can redo everything, but remember to never partition through ROM Manager ever again!
Sent from my SGH-T959 using XDA App
Is there a link you could provide him?
AgentFour20 said:
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
His exact symptoms happened to me when the noob in me decided to repartition in Rom Manager awhile back. I am just suggesting he uses this tool as an option. It's definitely a good tool to use regardless of how he got where he got.
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Mr.Duck said:
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Click to expand...
Click to collapse
Eugenes rom are on his new site www.eb-production.proboards.com
Sent from my SGH-T959 using XDA App
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
trill12 said:
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
Click to expand...
Click to collapse
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
AgentFour20 said:
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
Click to expand...
Click to collapse
Apparently. Completely forgot I attempted to enable it. I was freaked all the way out trying to repair the damn thing.
I was running Bionix-v 1.1.2 and the DOW kernel and everything was working great. My phone then got stuck on the DOW boot up image so i used Odin to flash back to stock like I have done countless times. I am able to get the phone into download mode and I start Odin and it states All threads completed. (succeed 1/failed 0) >Removed. At witch the phone would normally boot into recovery mode and Odin would finish doing its thing but my phone will now just show the battery charging picture, go black, then the battery charging picture again until I unplug the usb. The phone will power up to the Vibrant splash screen then go black. I can get the phone into download mode but I always get the same results when I try to flash with Odin. Any help would be appreciated... Thanks.
try another .tar... you can grab some in the noob guide/alt method in my signature. Its KA2 froyo leak + root. Others are in the Deb Bible too...
k i flashed another .tar(KA2 froyo leak + root) it boots into recovery and I get the following:
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
drewdude007 said:
k i flashed another .tar(KA2 froyo leak + root) it boots into recovery and I get the following:
E:Can't mount /dev/blocked/mmcblk0p1 (or /dev/block/mmcblk0)
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
Click to expand...
Click to collapse
I got the same error when running some test kernels. Try flashing JFD also flash the 512.pit file and check repartition in Odin . If that doesn't work flash Eugenes froyo that doesn't brick .
Sent from my SGH-T959 using XDA App
I downloaded a new copy of JFD and 512.pit checked repartition. Still was not able to get into recovery after Odin even with the new copy. Eugenes froyo that doesn't brick gave me the same can't mount error message.
Having the same issues.....JFD simply won't boot, Eugene's Froyo that wont brick makes it through the boot animations and then locks with the touch buttons lit up, Eugene's JK2+2E boots fine, but has this problem (internal and external storage show up as unavailable). I'm pretty sure it's related to using ODIN with Voodoo enabled and I've been going crazy all day trying to find a fix, but to no avail so far. ANY help would be incredibly appreciated!!
Try older odin programs. Yes u read that right.
Sent from my SGH-T959 using XDA App
I tried Odin3 v1.0, v1.3, v1.7, and v1.81 all with the same results.
drewdude007 said:
I tried Odin3 v1.0, v1.3, v1.7, and v1.81 all with the same results.
Click to expand...
Click to collapse
Then its your files. Download stock jfd again . Pit and tar. Do both. If you can delete your dalvik do.
Sent from my SGH-T959 using XDA App
Drewdude, since we're having the same problems, we should confer about it through some IM system in a little bit... two heads are better than one, right?
Well I have also tried Heimdall as well... no success with Heimdall either. So my final solution to the problem is I called T-Mobile and told them my phone would not turn on. My new Vibrant will be here in 3 days at no charge.
OP,
I just experienced the SAME Exact problem. THE VERY SAME.
Something tells me it's the DOW kernel.
W.T.F.
I've tried all the ODIN files that are available.
In each one, I get Vibrant, then it goes blank and turns off. Nothing else.
My phone is fried.
More likely than not, youre not fried, just soft-bricked same as me. Can you get your phone into download mode? Hold vol + and vol - while inserting your micro-sd cable...it should go to a picture of a yellow android with a shovel. If you can get to this mode, your phone is NOT fried.
THat's the only mode I can get into bud.
I've tried to load JI5 Ji6, Eugene's nonbrickin g Froyo.
None of the roms get past the vibrant screen.
THey just shut off.
Well I have been working on it for a day straight and no luck. I have talked to several people and the phone has readonly partition now so it is ****ed! Nand death!
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when tries to boots . Then flash JFD with repartition checked.
Probably you will need a couple of things in your tool kit.
You will need Odin 1.3 or higher
Pit file (there are 512 and 831) Guessing you will need the 512pit
Original JFD stock file 2.1
Eugenes froyo that does not brick
Remove the sim and the sd card, remove the battery have Odin up on the computer> then hold down the 3 buttons and plug in the phone to the usb connected to computer. If this works and Odin sees the phone (does not matter if it says com5 or 6 etc.) then you can go from there, If not then you will need a jig, people here sell them, i saw connextion2005 sells them but there are others (like 8bucks) or you could make it is 301k resistors tied to one 2 pins of the usb (do a search if you are interested).
Then the sequence for the fix is to flash the Froyo first that does not brick (do not check repartition) once it begins to reboot pull the battery out (does not need to reboot) then flash the JFD on top and this time check the repartition
Let this finish reboot> then use super one click root or other of your choice. Then download CWM and Titanium backup...... flash your new rom and you are back in business.[/QOUTE]
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
AgentFour20 said:
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when out boots . Then flash JFD with repartition checked.
Probably you will need a couple of things in your tool kit.
You will need Odin 1.3 or higher
Pit file (there are 512 and 831) Guessing you will need the 512pit
Original JFD stock file 2.1
Eugenes froyo that does not brick
Remove the sim and the sd card, remove the battery have Odin up on the computer> then hold down the 3 buttons and plug in the phone to the usb connected to computer. If this works and Odin sees the phone (does not matter if it says com5 or 6 etc.) then you can go from there, If not then you will need a jig, people here sell them, i saw connextion2005 sells them but there are others (like 8bucks) or you could make it is 301k resistors tied to one 2 pins of the usb (do a search if you are interested).
Then the sequence for the fix is to flash the Froyo first that does not brick (do not check repartition) once it begins to reboot pull the battery out (does not need to reboot) then flash the JFD on top and this time check the repartition
Let this finish reboot> then use super one click root or other of your choice. Then download CWM and Titanium backup...... flash your new rom and you are back in business.[QOUTE/]
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thanks but I have tried this method over and over again and it does not work for me. My phone is dead!
Click to expand...
Click to collapse
So is mine.
Somebody in the DOW thread said to use ODIN to flash the original Bionix Kernel only.
I don't see how that's helpful now since I've already flashed all the other 2.1 Tmobile roms.
This is F(ked.
unless somebody knows how I can flash a bionix rom using ODIN? I might be able to get that Bionix V stock kernel on there too.
Thanks
drewdude007 said:
AgentFour20 said:
Try these step from oka1 . He say to flash Eugenes froyo without repartition checked then pull the battery when out boots . Then flash JFD with repartition checked.
Thanks but I have tried this method over and over again and it does not work for me. My phone is dead!
Click to expand...
Click to collapse
Click to expand...
Click to collapse