HD2 can not upgrade new radio 2.15!? - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hello
Today I have this problem,I have just upgrade my HSPL 1.42 to 2.08 and everything is ok..I tried to upgrade my old radio 2.12 to 2.15 for new android run on NAND for future..but seems unlucky it stuck at bootloader 3 colors and appear a diagbox.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I dont know how to solve it, I've checked everything cable with PC and HD2 with cable..it plugged together and I still can sync my outlook..problem just appear when I try to upgrade to new radio?
Any ideas! If this problem can not solved ? it means I can't run android on NAND!!..
I'm using HD2 global and PC windows7!
Thanks and BG!

leave the phone in bootloader (three colour screen) with USb at bottom, click exit on hspl.exe and run hspl again. (dont forget right click and 'run as administrator') if fails again change usb ports (dont touch phone, leave in bootloader) and try again.
oh and when you say ''I have just upgrade my HSPL 1.04 to 2.08'' (no such spl as 1.04), , did you mean 2.08.0000 or 2.08.hspl? do you know the difference? just saying 2.08 misses out the most important piece of info, and makes a massive difference, on .0000 you cant flash,, on .hspl you can.

samsamuel said:
leave the phone in bootloader (three colour screen) with USb at bottom, click exit on hspl.exe and run hspl again. (dont forget right click and 'run as administrator') if fails again change usb ports (dont touch phone, leave in bootloader) and try again.
oh and when you say ''I have just upgrade my HSPL 1.04 to 2.08'' (no such spl as 1.04), , did you mean 2.08.0000 or 2.08.hspl? do you know the difference? just saying 2.08 misses out the most important piece of info, and makes a massive difference, on .0000 you cant flash,, on .hspl you can.
Click to expand...
Click to collapse
Thanks, it's 1.42 and now it's 2.08..I dont know why everytime it boot to three color and it appear that diagbox..poor..!

mrkyo said:
Thanks, it's 1.42 and now it's 2.08..I dont know why everytime it boot to three color and it appear that diagbox..poor..!
Click to expand...
Click to collapse
That dialog box usually due to bad connection between your phone and PC. Possible solution is to try using different USB port and when run the custom rue, you must as administrator, and don't forget to turn off all Internet, Bluetooth connection and disable your antivirus and firewall.
if still not working, try using win xp ( you can ask your friend who still using it)
Or otherwise you can try using micro sd card method.
But, are u sure you have SPL 2.08. HSPL?
Good luck

thanks man
I have tried many times to up new radio but can not success..!
I'm sure it's 2.08 HSPL..I'm not newbie..because run android from NAND need 2.08 so I must upgrade from 1.42 to 2.08 HSPL..and this is the first time I have trouble with up Rom and radio, last time I always use 1.42 HSPL to up rom and radio without problems. ..but only this time when I try to 2.08 HSPL it did..and I guess problem is win7..last time I used winxp with 1.42 and everything ok..now it's problem with win7..
I have tried all the way you said but still can not....
what's wrong with me?
PS: If I dont upgrade new radio ...my PPC and PC connect via cable ok...I can use internet and sync my outlook mail..it's mean problem is not cable..just something eles but I dont know??

mrkyo said:
thanks man
I have tried many times to up new radio but can not success..!
I'm sure it's 2.08 HSPL..I'm not newbie..because run android from NAND need 2.08 so I must upgrade from 1.42 to 2.08 HSPL..and this is the first time I have trouble with up Rom and radio, last time I always use 1.42 HSPL to up rom and radio without problems. ..but only this time when I try to 2.08 HSPL it did..and I guess problem is win7..last time I used winxp with 1.42 and everything ok..now it's problem with win7..
I have tried all the way you said but still can not....
what's wrong with me?
PS: If I dont upgrade new radio ...my PPC and PC connect via cable ok...I can use internet and sync my outlook mail..it's mean problem is not cable..just something eles but I dont know??
Click to expand...
Click to collapse
Hmmm... I ever experienced as you did with win7. What I did was restarting PC and also leave my phone off for about 30 minutes and it solved
What about trying micro sd card method to flash radio? Have u tried it?

silverwind said:
Hmmm... I ever experienced as you did with win7. What I did was restarting PC and also leave my phone off for about 30 minutes and it solved
What about trying micro sd card method to flash radio? Have u tried it?
Click to expand...
Click to collapse
Yes, I do..I tried to flash in SD card , but cannot ...even I have just format my sd with FAT 32 and try agian..but still can't...OMG...now it boot to three colors it' stuck..and nothing happen then.....What should I do?
Tried to hard reset and format everything I can..but ..unlucky....

mrkyo said:
Yes, I do..I tried to flash in SD card , but cannot ...even I have just format my sd with FAT 32 and try agian..but still can't...OMG...now it boot to three colors it' stuck..and nothing happen then.....What should I do?
Tried to hard reset and format everything I can..but ..unlucky....
Click to expand...
Click to collapse
Assuming you have "SPL 2.08 HSPL" installed at your hd2.
To upgrade radio via micro sd method, download radio 2.15.xxx and make sure your downloaded file is not corrupt. Rename it to "leoimg.nbh" (without quote)
Copy it to the root directory of a clean, formatted micro sd.
Now, turn off the phone and insert the micro sd.
Now, press the volume down button and (while keep on pressing) press the power on button. You should go into white screen and follow the on screen instruction carefully. If successful, you remove the battery and put it back again and turn on the phone.
Good luck
Ps. Please be careful with battery capacity at least 50%

yes, sure I'm having 2.08 HSPL..and I know how to flash rom-radio by SD card..Anyway, now I found the problem to flash radio or rom...I must remove my battery for some hours maybe 3 hours..I guess..and try to reflash by SD card with file LEOIMG.nbh on root...and everything goes as normal..I can flash rom or radio by this way..only this way!..but it's very hard..because now when I go into tri-colors bootloader ..white screen appear just a moment and dissaper and replace by tri-colors ..I dont know why..?! If I dont catch it ( white screen ) and missing till tri-colors appear..I can't flash any more..redo everything again..
Now my problem with tri-colors bootloader..I can't flash by PC anymore..because it's always stuck at tri-colors and that's all..Do you know what wrong with my status!?..
Till now I'm scare to try flash rom or radio again..
PS: I tried to flash radio and rom by XP PC..still same win7..till tri-colors and stuck..it seems the problem not by OS..maybe my phone..

mrkyo said:
yes, sure I'm having 2.08 HSPL..and I know how to flash rom-radio by SD card..Anyway, now I found the problem to flash radio or rom...I must remove my battery for some hours maybe 3 hours..I guess..and try to reflash by SD card with file LEOIMG.nbh on root...and everything goes as normal..I can flash rom or radio by this way..only this way!..but it's very hard..because now when I go into tri-colors bootloader ..white screen appear just a moment and dissaper and replace by tri-colors ..I dont know why..?! If I dont catch it ( white screen ) and missing till tri-colors appear..I can't flash any more..redo everything again..
Now my problem with tri-colors bootloader..I can't flash by PC anymore..because it's always stuck at tri-colors and that's all..Do you know what wrong with my status!?..
Till now I'm scare to try flash rom or radio again..
PS: I tried to flash radio and rom by XP PC..still same win7..till tri-colors and stuck..it seems the problem not by OS..maybe my phone..
Click to expand...
Click to collapse
Mate, it is really bad. What does the tri collor screen says? does it say invalid ID? Can you give the screenshot?

silverwind said:
Mate, it is really bad. What does the tri collor screen says? does it say invalid ID? Can you give the screenshot?
Click to expand...
Click to collapse
This is bootloader screen when connect with PC via cable...its has "USB" at bottom.
​
and "Serial"at bottom..without via cable...
I think it's normal as everyone..just dont know why I cannot flash rom or radio anymore...so bad!
PS: this pic I borrow someone everything is same as mine..just one thing different: 0x50 of mine and that pic above say: 0x00..that's all

mrkyo said:
This is bootloader screen when connect with PC via cable...its has "USB" at bottom.
​
and "Serial"at bottom..without via cable...
I think it's normal as everyone..just dont know why I cannot flash rom or radio anymore...so bad!
PS: this pic I borrow someone everything is same as mine..just one thing different: 0x50 of mine and that pic above say: 0x00..that's all
Click to expand...
Click to collapse
Mate, normally we can flash the radio and the custom rom in that condition.
It's really strange to me. I never experienced like you did.
I am sorry I cant help you further. Maybe someone else with more knowledge and expertise can help you.
Good luck..

silverwind said:
Mate, normally we can flash the radio and the custom rom in that condition.
It's really strange to me. I never experienced like you did.
I am sorry I cant help you further. Maybe someone else with more knowledge and expertise can help you.
Good luck..
Click to expand...
Click to collapse
Thank you so much for helping me through days...
I need any help plz..I dont want to give up when I dont know what I am wrong??

A known problem with SD Card flashing is using too big an SD Card. 4GB or less should get rid of that problem.

fred_up said:
A known problem with SD Card flashing is using too big an SD Card. 4GB or less should get rid of that problem.
Click to expand...
Click to collapse
I tried 2 SD Card 1Gb with formatted FAT32 already..but it didnt work..only my SD 8Gb working..it sounds funny..

I need help, plz....

mrkyo said:
I need help, plz....
Click to expand...
Click to collapse
Mee to am having the same PROBLEM !! i have also the "0x50". I tried hard to flash the RADIO but cannot !! try to flash to Lover Radio like 2.07. First it worked for me ! But still i was STUCK on the LOGO HTC. Then i tried loads of ways NOW when i tried to USE RADIO 2.07 it freeze at 96% ! Am Blocked since Two days !!
So i conclude the PROBLEM come from the RADIO part !!

Related

TG01 Boot Problem - This time I really messed up

I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
El Diablo said:
I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
Click to expand...
Click to collapse
Don't worry, I've seen the worse and facing worse than yours.
A little read through the forum would have definitely solved your issue. However, I do understand that under such circumstances, you want to get to the solution quick. Here it is:
When you say not charging - can you see RED LED light flash or even appear when you plug to PC -(I think not)?
If your answer is NO, then follow on and try this
There you go, my last bit of help before I loose my TG01 forever!
El Diablo said:
I've flashed my TG01 with a regular ROM, everything went normal except it comes to booting part. So my problem is, device is not booting, not charging, and not recognizing by any PC's I've tried. I guess I really messed up this time.
What can I do? In my country TG01 is not officially announced, so the Services I've tried could'nt fix the problem. I'm at my own I think. But with your help I can make this device to return life.
Thanks in advance, I'm really desperate right now...
Click to expand...
Click to collapse
Explain something. You normally flashed it via tg01_sddl+.exe , bootloader appeared, after few minutes it showed "...succesfully and will be restarted....." and after reset nothing happened ? You still have black screen ? It is strange that charger does not work. Maybe tg01 is still in booting phase but wrong flashing cause it is not able to display even Toshiba logo ? Did You try to remove battery, put it again and plug charging cable to see whether charging is working ? ( Do not press ON button when You put battery back )
Regards
fxdjacentyfxd
fxdjacentyfxd said:
Explain something. You normally flashed it via tg01_sddl+.exe , bootloader appeared, after few minutes it showed "...succesfully and will be restarted....." and after reset nothing happened ? You still have black screen ? It is strange that charger does not work. Maybe tg01 is still in booting phase but wrong flashing cause it is not able to display even Toshiba logo ? Did You try to remove battery, put it again and plug charging cable to see whether charging is working ? ( Do not press ON button when You put battery back )
Regards
fxdjacentyfxd
Click to expand...
Click to collapse
The reason, I understood few months back from one of the mates who works in a repair centre (not toshiba):
This is semi-bricked TG01, hence it will show a faint white light when you tilt the phone, but won't show Toshiba logo AND won't charge.
The TG01 looses 'bootloader' and hence forgets to even boot - this occurs in 'fully' bricked TG01. TG01 not charging is a bad sign, especially when you don't even see 'toshiba' screen.
If you see that screen but don't see RED LED (i.e. not charging/ not being recognized) - you can still get it back using 'short pin' or 'unbrick method'
Thank you both for the fast and useful replies.
drupad2drupad,
No, I don't see any light even.
fxdjacentyfxd,
I always use the Short PIN method to flash my device. It's past over one month, maybe I remember it wrong.
BTW, the methods you linked needs to TG01 recognizes by PC, right? But I've tried with two PC's, one uses Win7 and the other one uses XP. Both does not recognize the device.
El Diablo said:
T
I always use the Short PIN method to flash my device. It's past over one month, maybe I remember it wrong.
Click to expand...
Click to collapse
In normal working tg01 I would afraid to utilize permamently 3-pin method. In my oppinion one should utilize it only with problems with tg01 because this pins are connected somewhere to the hardware. It is very easy to cause electrostatic shock and simply damage whole device. For good cooked roms tg01_sddl+.exe is the best solution because it is none intrusive method. Anyway, Huston we have problem.
Regards
fxdjacentyfxd
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
El Diablo said:
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
Click to expand...
Click to collapse
What happened in the past You are not able to utilze tg01_sddl+.exe ? It sounds rather strange for me that in good working tg01 such methods may not work .
Reagrds
fxdjacentyfxd
It always says "Error occurred during system reset".
I've never managed to run it properly...
What are you suggesting in this situation? Can it be resurrected?
El Diablo said:
You are right, but I tried it almost hundred times, but couldn't managed to flash via tg01_sddl+.exe. So there is only one option to flash my device.
Click to expand...
Click to collapse
El Diablo - it might be a bad news. If there is no red light on top and the short pin doesn't work - it might be bricked (sorry! )
However - do you see a faint white back light on the screen - tilt your phone side ways and you should see white brightness on screen - if it does this - I think (from what I remember) - you can revive this but it might be the case that your battery is draining now - PLEASE TRY TO CHARGE YOUR BATTERY SOMEHOW BECAUSE IF BATTERY DRAINS OUT WHILE TRYING TO FLASH, YOU WILL DEFINITELY BRICK THE PHONE (IF IT IS NOT YET!)
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
OR
You might be able to get this working by sending it to a toshiba repair center. I do understand there is none where you live, but sending it by courier might be another option.
I hope you can revive the phone - I feel the pain
drupad2drupad said:
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
yes is 100% bricked! BUT this is 100 % the solution (with tg01.bin file (unzip) bootloaderfile)
2. LCD Display stay black (or verry dim black light) and when plug it in to charge No red LED flash, not possible to RESET OR Hard RESET
= unbrick method= TG Downloader over PC connection with user manual in german (pls translate with google translator for other language) contains: TG01 Downloader TG01 Driver TGTool
and here the needed bin file: tg01.bin file (unzip)
drupad2drupad said:
El Diablo - it might be a bad news. If there is no red light on top and the short pin doesn't work - it might be bricked (sorry! )
However - do you see a faint white back light on the screen - tilt your phone side ways and you should see white brightness on screen - if it does this - I think (from what I remember) - you can revive this but it might be the case that your battery is draining now - PLEASE TRY TO CHARGE YOUR BATTERY SOMEHOW BECAUSE IF BATTERY DRAINS OUT WHILE TRYING TO FLASH, YOU WILL DEFINITELY BRICK THE PHONE (IF IT IS NOT YET!)
If you don't see this back light and you no red light - it IS bricked. Only option finding the bootloader file - which is DAMN hard to find. When I bricked my first TG01, I never managed to find this file
OR
You might be able to get this working by sending it to a toshiba repair center. I do understand there is none where you live, but sending it by courier might be another option.
I hope you can revive the phone - I feel the pain
Click to expand...
Click to collapse
No, the phone's is acting like a stone actually. Thanks for your time and good wishes.
mirolg,
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
But, are you saying I can still revive my device?
El Diablo said:
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
Click to expand...
Click to collapse
Does PC "says" something after tg01 usb plugin ? ( any sound , message ).
Frankly speaking I was not able to utilze this method too because my XP detects tg01 in wrong way. I have few sounds and after several seconds device disappears completely from XP. It was even when my tg01 was not "bricked" - from time I bought it. After my first ( and so far last ) "brick" nothing changed - fortunately 3-pin method works . But I have any PC answer . You have not any ?
Regards
fxdjacentyfxd
No, there is no notification sound, message, nothing pop ups.
El Diablo said:
No, the phone's is acting like a stone actually. Thanks for your time and good wishes.
mirolg,
But PC's do not recognize the TG01. I've read the instruction manual, TG01 need to be plugged in a USB port, right? That means the PC MUST recognize the TG01 as I understood.
But, are you saying I can still revive my device?
Click to expand...
Click to collapse
my t01 was two times full bricked (i´m a hardcore cook ) , such your tg01. i have revive my device!
install the tg downloader and tg01 driver load my tg01.bin and put in the same folder. before conect tg01 over usb with pc, start tg downloader. select TG01W (ignore error) and ok.browse program file to tg01.bin (ignore error) connect your tg01. in port display tg01 and start. led flash in different colors. wait, wait, wait. finish!
mirolg said:
my t01 was two times full bricked (i´m a hardcore cook ) , such your tg01. i have revive my device!
install the tg downloader and tg01 driver load my tg01.bin and put in the same folder. before conect tg01 over usb with pc, start tg downloader. select TG01W (ignore error) and ok.browse program file to tg01.bin (ignore error) connect your tg01. in port display tg01 and start. led flash in different colors. wait, wait, wait. finish!
Click to expand...
Click to collapse
I did every step you've said, but neither the TGDownloader recognizes the device, so I can't start the update.
you have also to switch on the tg01.
Of course I tried to switch on TG01. But nothing happened.
But I must say that it's like something of device's hardware "shaking". I can feel the squezing in it. Any ideas?
Maybe the battery has not good contact? When you remove the back cover, can you move the batt with your fingers?
El Diablo said:
Of course I tried to switch on TG01. But nothing happened.
But I must say that it's like something of device's hardware "shaking". I can feel the squezing in it. Any ideas?
Click to expand...
Click to collapse
Ok. you not see red led or other BUT if your LCD Display stay black (or verry dim black light)
then tg01 is ON

X10 Seems to be dead. Urgent, Please Help

- Was using Free X10 Beta 4, Changed Brightness Settings, Phone crashes
- It will not turn on, but it does vibrate when holding the power on button
- The Phone is recognised by USB and comes up with the Green Light although
does not update in SEUS - "Product Cannot Be Identified" (I've deleted/replaced blob_fs, still same problem)
- Attempted to update firmware with PC Companion, Does not work, "Download Error"
- I've also attempted to installed a generic firmware through Flashtool, whilst it takes a very long time to flash it finishes although phone remains not working after.
What is wrong? I've simply changed brightness settings and it's crashed. Please help me get my phone working, I need it urgently.
This has happened once before although I've been able to reflash the firmware via SEUS although this time it isn't identifying my phone.
How was your battery level?
Ive never heard about this situation in particular but i believe if you search there are threads on unbricking an x10. Take a look around the forums and search unbrick x10 and see what you get.
Sent from my X10i using XDA App
Battery level was near 100%.
The Search seems to be down, could anyone link me to an unbricking tutorial on here?
Thanks.
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
foxhound494 said:
Bump..
Unbricking method doesn't work (just flashing via Flashtool with generic firmware). On top of that it takes ages to flash via this method for some reason.
Anyone have any idea what the problem is?? The phone should be working fine, all I did was change the brightness setting and then it crashed.
Click to expand...
Click to collapse
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
kanchigo said:
it doesn't matter if U can access to flash mode. if u can, so before connect ur phone to computer, in SEUS Support zone =>start=>update software => start, then press blue letter "repair phone", wait until it ask for coonect phone in flash mode
Click to expand...
Click to collapse
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
subhankar.ds said:
Flash it with generic .sin files by flash tool......before that wipe total system.....
it should work....
Click to expand...
Click to collapse
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
foxhound494 said:
I get the following error:
Download error unable to download your phone software. please check your internet connection or try again later
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
foxhound494 said:
I've tried flashing several times, still doesn't work when finished. Not to mention it takes a good 2hours plus.
Click to expand...
Click to collapse
Can you post the flash tool log file?
kanchigo said:
there are somthing wrong with ur comp. U'd better try again on other comp. install Companion and try repair it
Click to expand...
Click to collapse
Uninstalled PC Companion and reinstalled it although same problem.
subhankar.ds said:
Can you post the flash tool log file?
Click to expand...
Click to collapse
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
If you do get it sorted, you cant set brightness to auto, will cause a crash. This was highlighted in z's original freex10 thread.
Sent from my X10i using XDA App
Mister J said:
Is your usb cable okay? maybe the problem is your usb cable. As of right now its IMPOSSIBLE to brick the X10 due to the bootloader not being cracked. The only problem can be your programs, cable, or maybe you dropped your X10 one to many times.
Click to expand...
Click to collapse
It's not my programs, cables or computer as I've just flashed my friends X10 and it worked perfectly. I've never dropped my phone, It's done this after changing brightness setting on FreeX10 Beta 4.
It's also not the battery as I've tried using a friends battery and still the same problem.
foxhound494 said:
I can't right now because I closed the Flash Tool although when it gets to flashing System it disconnects and the LED turns red, it then proceeds to saying everything has finished, disconnect phone and turn on.
Click to expand...
Click to collapse
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
subhankar.ds said:
I believe, your data cable/port is faulty....
Check it with another data cable/repair the data port...
Click to expand...
Click to collapse
I flashed another X10 using this exact cable/port and it worked fine.
It can't be the data cable/port.
SEUS
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
denenatse said:
remove SEUS, go to SE site, download ONLY device specific software, and it will only include the must recent SE x10 update, and try that. good
Click to expand...
Click to collapse
Followed steps. Frozen on "Checking connected phone". I don't think anyone will be able to help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
battery
remove battery for five seconds just before you connect and flash mode simultaneously.
denenatse said:
remove battery for five seconds just before you connect and flash mode simultaneously.
Click to expand...
Click to collapse
Same old problem. Failed to detect product. I've been trying to fix this phone for nearly a week now. Still nothing.
Xrecovery
reaching, but you wouldn't happen to have xrecovery installed? i say try repair phone once more with SE site if SEUS doesn't work. how far does it boot? anything?

HTC Touch Diamond2 After Update Rom hang only Logo

i just update rom Photon ROM 6.5 Standard Edition
http://forum.xda-developers.com/showthread.php?t=943396
now it hang only logo touch diamind 2.
how to do next?
please help me
Hi,
Remove SD Card, if any, and do a Hard Reset and see if that help.
Do let me know what is the result so that I can help you.
Cheers!!!
prabhat said:
Hi,
Remove SD Card, if any, and do a Hard Reset and see if that help.
Do let me know what is the result so that I can help you.
Cheers!!!
Click to expand...
Click to collapse
my phone Topa100 before update phone work well but i need change china language to english.
after update phone hang with logo touch diamond2
i try hard reset but not work for me.
Vichka said:
my phone Topa100 before update phone work well but i need change china language to english.
after update phone hang with logo touch diamond2
i try hard reset but not work for me.
Click to expand...
Click to collapse
Topa100: Looks like your device is NOT HTC Diamond2 or Topaz (Check WiKi - Check Model Numbers at Intro section)? If SO, you may have to try different ROM, as Photon ROM is for Topaz/HTC Diamond2 devices ONLY.
Let me know if I can help you in any way...
Cheers!!!
prabhat said:
Hi,
Remove SD Card, if any, and do a Hard Reset and see if that help.
Do let me know what is the result so that I can help you.
Cheers!!!
Click to expand...
Click to collapse
Dear prabhat,
Can you help see my case?
I flash a Diamond2 with official WM 6.1 ROM, after finish the phone stack on the tri-color screen, showing "Turbo SW/HW not match!". can any help help to save the Diamond2? Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom file name:RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe
Rom: 1.40.832.2
Radio: 3.44.25.27
Protocol: 61.25t.25.19
Some member teacher me try to reflash TopazSPLRelocker SPL133 first, but when I reflash "TopazSPLRelocker SPL133", the phone can change from tricolor screen to progress bar but the phone stuck at 0%, than after several minutes PC prompt [ERROR 262]. I follow the program to recovery the connection but still the same.
Also I appear same problem which stuck at 0% when flash any cooked rom, e.g. Photon ROM 6.5 and TiGeR Light Ver 1.
I also try flashing by using Storage Card by rename the cooked rom (.nbh) file to TOPAIMG.nbh, the result is same stuck on 0%.
I also try Advanced ROM Update Utility for TOUCH DIAMOND2/TOPAZ by Barin and "CustomRUU.exe" but still stuck at 0% and [ERROR 262], but it is success using official update exe (RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_6 1.25t.25.19_3.44.25.27_Ship.exe).
Thank you.
Bun
hinbun said:
Dear prabhat,
Can you help see my case?
I flash a Diamond2 with official WM 6.1 ROM, after finish the phone stack on the tri-color screen, showing "Turbo SW/HW not match!". can any help help to save the Diamond2? Thank you.
Rom file name:RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_61.25t.25.19_3.44.25.27_Ship.exe
Rom: 1.40.832.2
Radio: 3.44.25.27
Protocol: 61.25t.25.19
Some member teacher me try to reflash TopazSPLRelocker SPL133 first, but when I reflash "TopazSPLRelocker SPL133", the phone can change from tricolor screen to progress bar but the phone stuck at 0%, than after several minutes PC prompt [ERROR 262]. I follow the program to recovery the connection but still the same.
Also I appear same problem which stuck at 0% when flash any cooked rom, e.g. Photon ROM 6.5 and TiGeR Light Ver 1.
I also try flashing by using Storage Card by rename the cooked rom (.nbh) file to TOPAIMG.nbh, the result is same stuck on 0%.
I also try Advanced ROM Update Utility for TOUCH DIAMOND2/TOPAZ by Barin and "CustomRUU.exe" but still stuck at 0% and [ERROR 262], but it is success using official update exe (RUU_Topaz_HKCSL_CHT_1.40.832.2_Radio_Sign_Topaz_6 1.25t.25.19_3.44.25.27_Ship.exe).
Thank you.
Bun
Click to expand...
Click to collapse
Hi,
Looks like your device is locked for official rom till now so you are not able to install any custom ROM and it fails. As you did before, please do HARD-SPL again with step by step given in the same thread.
Make Sure you have Internet access on PC
Disable AV software if any
Connect the device to PC - ActiveSync/WMDC
Follow the "Instructions" in the thread. (Use Topaz-HardSPL_V5_09R6_CRT_183HSPL.zip)
PC may install some driver on first reboot of your device.
It should finish the task on your device and it should be ready.
Cheers!!!
prabhat said:
Hi,
Looks like your device is locked for official rom till now so you are not able to install any custom ROM and it fails. As you did before, please do HARD-SPL again with step by step given in the same thread.
Make Sure you have Internet access on PC
Disable AV software if any
Connect the device to PC - ActiveSync/WMDC
Follow the "Instructions" in the thread. (Use Topaz-HardSPL_V5_09R6_CRT_183HSPL.zip)
PC may install some driver on first reboot of your device.
It should finish the task on your device and it should be ready.
Cheers!!!
Click to expand...
Click to collapse
Thank you for your reply.
I CANNOT succeed do HARD-SPL. Any help? Thank you.
I follow every thing in the thread.
1. PC have Internet access.
2. PC install ActiveSync(XP)
3. PC installed driver on when first reboot the device.
4. Reboot PC before HSPL.
5. I use Topaz-HardSPL_V5_09R6_CRT_183HSPL.zip
6. I disable antivirus and windows firewall.
7. On the white part of tricolor screen it show "USB".
First I try automatic flash but show the following error:
I cannot not install the enablerapinew.cab because I cannot boot into WM.
Then I try Manual Flash, but also fail, the phone stuck at 0% and PC show ERROR [262], I followed the recovery procedure and try again it also fail the do HSPL.
hinbun said:
Thank you for your reply.
I CANNOT succeed do HARD-SPL. Any help? Thank you.
I follow every thing in the thread.
1. PC have Internet access.
2. PC install ActiveSync(XP)
3. PC installed driver on when first reboot the device.
4. Reboot PC before HSPL.
5. I use Topaz-HardSPL_V5_09R6_CRT_183HSPL.zip
6. I disable antivirus and windows firewall.
7. On the white part of tricolor screen it show "USB".
First I try automatic flash but show the following error:
I cannot not install the enablerapinew.cab because I cannot boot into WM.
Then I try Manual Flash, but also fail, the phone stuck at 0% and PC show ERROR [262], I followed the recovery procedure and try again it also fail the do HSPL.
Click to expand...
Click to collapse
try to reflash via SD-Card ! rename RUU_Signed.nbh file to TOPAIMG.NBH and put the file on the SD card
Hakim Rahman said:
try to reflash via SD-Card ! rename RUU_Signed.nbh file to TOPAIMG.NBH and put the file on the SD card
Click to expand...
Click to collapse
Thank you.
But probably not success because It is fail to use sd card to flash cook rom or radio. The phone always stuck at "Loading..." screen.
By the way, which "RUU_Signed.nbh" should I use? The Hard SPL is an exe. Thank you.
hinbun said:
Thank you.
But probably not success because It is fail to use sd card to flash cook rom or radio. The phone always stuck at "Loading..." screen.
By the way, which "RUU_Signed.nbh" should I use? The Hard SPL is an exe. Thank you.
Click to expand...
Click to collapse
this RUU file that can be you use Hard-SPL 1.83.OliNex
Hakim Rahman said:
this RUU file that can be you use Hard-SPL 1.83.OliNex
Click to expand...
Click to collapse
Dear Rahman,
I also try flashing Hard-SPL 1.83.OliNex by using Storage Card by rename the to to TOPAIMG.nbh, but the phone keep stuck on "Loading..." screen. Thank you.
Bun
Just a wild guess... try removing your SIM and SD Card and re-try.
Cheers!!!
Hakim Rahman said:
this RUU file that can be you use Hard-SPL 1.83.OliNex
Click to expand...
Click to collapse
Dear Rahman,
it is also fail to use SD card to do HSPL!! Ths phone was stuck on "Loading" screen.
Another other method? Thank you
---------- Post added at 09:35 AM ---------- Previous post was at 09:33 AM ----------
prabhat said:
Just a wild guess... try removing your SIM and SD Card and re-try.
Cheers!!!
Click to expand...
Click to collapse
Dear prabhat,
I try removed the SIM and SD Card its also fail!! Stuck on "Loading..." screen. Any method to save my phone? Thank you
Your Problem will be 100% solve. I tested.
Vichka said:
my phone Topa100 before update phone work well but i need change china language to english.
after update phone hang with logo touch diamond2
i try hard reset but not work for me.
Click to expand...
Click to collapse
Your Problem will be 100% solve. I tested.
You Need to update your Radio version. Download from Here....

I managed to brick my TP

Installed cm via directions. No problems. Decided to try installing a new Android kernel. Flashed via recovery.
Moboot, but couldn't get into any os, not even recovery. Eventually got into Android. Was able after many attempts to get to webos. Decided to try and reinstall cm9 and such. Plugged into computer while in webos to move files over and got a need to format window. Hit yes (i know, I know).
Now can't even get moboot. Decide to Dr it. Gets to 12% and doesn't move. Google it and follow some novaterm/cmd directions.
Now Dr gets to 8% and says unable to reset device. Have a hard time getting into HP recovery (usb symbol). Mostly get an exclamation point in a triangle and the url for Dr.
What r my options, HP warranty? Thx
Sent from my PG86100 using XDA App
The cm team can help you on IRC here's info I copied from the cm thread go here and they should get you right http://webchat.freenode.net?channels=cyanogenmod-touchpad
The reason the doctor is failing is because Android messes with your partitions and at 12% the webOS doctor is verifying partitions. Have you attempted ACMEUninstaller? When at the webOS screen go ahead and run ACMEUinstaller. Then if uoi can boot into webOS do the complete wipe to wipe the entire SD section. Then doctor it and then reflash Android with ACMEinstaller2
Sent from T the Touchpad
Eat it iPhone said:
Installed cm via directions. No problems. Decided to try installing a new Android kernel. Flashed via recovery.
Moboot, but couldn't get into any os, not even recovery. Eventually got into Android. Was able after many attempts to get to webos. Decided to try and reinstall cm9 and such. Plugged into computer while in webos to move files over and got a need to format window. Hit yes (i know, I know).
Now can't even get moboot. Decide to Dr it. Gets to 12% and doesn't move. Google it and follow some novaterm/cmd directions.
Now Dr gets to 8% and says unable to reset device. Have a hard time getting into HP recovery (usb symbol). Mostly get an exclamation point in a triangle and the url for Dr.
What r my options, HP warranty? Thx
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
lucky for us, the TP can never be bricked unless you start to manually edit partition tables (and even then, its fixable with much hair pulling, ive personally troubleshooted this with a friend before )
maybe these threads can help you out:
http://forum.xda-developers.com/showthread.php?t=1236727&page=2.
http://forum.xda-developers.com/showthread.php?t=1379579
it really helps to have a grasp on how novaterm works, and ALWAYS ALWAYS re read your commmands to ensure you typed it correctly (upper/lower case espicially ;P)
Thx guys ill look into it, but I'ma be busy so ill have to chk this out tomorrow
Sent from my PG86100 using XDA App
http://forum.xda-developers.com/showthread.php?t=1426244
Try it. It may just work.
rr5678 said:
http://forum.xda-developers.com/showthread.php?t=1426244
Try it. It may just work.
Click to expand...
Click to collapse
oh god, that brings back terrible memories of "unbricking" my buddies TP from scratch using mine as a reference
and yes, Eat it iPhone, this is the best last alternative for repair, you will be restored to 100% BNIB (or LNIB as the case would be )
Solidus_n313 said:
oh god, that brings back terrible memories of "unbricking" my buddies TP from scratch using mine as a reference
and yes, Eat it iPhone, this is the best last alternative for repair, you will be restored to 100% BNIB (or LNIB as the case would be )
Click to expand...
Click to collapse
It may be horrible but in the end it's worth it
P.S.: I read that link in your signature (The TRUTH: XDA: Then and Now), and all I have to say is.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
im still wating for a complete recovery without bootie... which doesnt evn turn on the screen.heh
as said before more likely than not its a currupted partition that its stoping on...
darkassain said:
im still wating for a complete recovery without bootie... which doesnt evn turn on the screen.heh
as said before more likely than not its a currupted partition that its stoping on...
Click to expand...
Click to collapse
There is no recovery from a missing bootie (not that I know of). A missing bootie is like a missing hboot.
rr5678 said:
There is no recovery from a missing bootie (not that I know of). A missing bootie is like a missing hboot.
Click to expand...
Click to collapse
yep there is a way, you just havent heard of it (the pre has a way to boot from a corrupted bootie too)...
you can boot directly from the usb into the cpu bypasing bootie (instead of power + vol-up to enter bootie try it with vol-down while connected to a pc , and you will get what i mean..)
work has been done on this but a working product hasnt...
also is the hboot in nand or rom (im gueasing the nand /boot partiton just as with the few android devices i have worked on)
darkassain said:
yep there is a way, you just havent heard of it (the pre has a way to boot from a corrupted bootie too)...
you can boot directly from the usb into the cpu bypasing bootie (instead of power + vol-up to enter bootie try it with vol-down while connected to a pc , and you will get what i mean..)
work has been done on this but a working product hasnt...
also is the hboot in nand or rom (im gueasing the nand /boot partiton just as with the few android devices i have worked on)
Click to expand...
Click to collapse
No, the Pre is a completely different device. The Pre has an OMAP3430, while the TouchPad has your typical (non-USB bootable) Qualcomm processor.
And hboot is in the nand. (but still erasable)
rr5678 said:
No, the Pre is a completely different device. The Pre has an OMAP3430, while the TouchPad has your typical (non-USB bootable) Qualcomm processor.
And hboot is in the nand. (but still erasable)
Click to expand...
Click to collapse
doesnt matter boot with power+voldown and you enter qualcomm recovery which can boot from usb....
ps should have said that this only works on the TP
pps should mention that other qualcomm devices can boot from usb too...
darkassain said:
doesnt matter boot with power+voldown and you enter qualcomm recovery which can boot from usb....
ps should have said that this only works on the TP
pps should mention that other qualcomm devices can boot from usb too...
Click to expand...
Click to collapse
If you're talking about QHSUSB_DLOAD, there is no known way to use that. No image files, nothing.
rr5678 said:
If you're talking about QHSUSB_DLOAD, there is no known way to use that. No image files, nothing.
Click to expand...
Click to collapse
which is why i mentioned in two different posts that that its "not working" and why "im waiting" for something like this...
it works on some phones though which means it will communicate
darkassain said:
which is why i mentioned in two different posts that that its "not working" and why "im waiting" for something like this...
it works on some phones though which means it will communicate
Click to expand...
Click to collapse
I wish it was known what to do though. That's a super low level function.

Atrix 4g at&t hard brick problem

Hi xda. I have a atrix 4g which is a at&t model and while flashing a rom it bricked. when i try to open it says failed to boot then it says entering ...... recovery so quickly that i hardly caught what it says. and then screen goes black, nothing.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(this is from google, the problem is same)
the phone doesnt enter recovery or anything else. i know usb jig method but i failed to do it. if you may help me i will really appreciate that
mike4peace said:
Hi xda. I have a atrix 4g which is a at&t model and while flashing a rom it bricked. when i try to open it says failed to boot then it says entering ...... recovery so quickly that i hardly caught what it says. and then screen goes black, nothing.
(this is from google, the problem is same)
the phone doesnt enter recovery or anything else. i know usb jig method but i failed to do it. if you may help me i will really appreciate that
Click to expand...
Click to collapse
So if the message on the screen matches your problem, that must mean that you are like other members of recent. it means you don't know how to use this wonderful creation called a search and need to create pointless threads.
took me all of 5 seconds to do what you didn't do. I mean even if you had typed what you think the screen showed, the auto fill feature would have pointed you in the right direction too
http://forum.xda-developers.com/showthread.php?t=1490903
palmbeach05 said:
So if the message on the screen matches your problem, that must mean that you are like other members of recent. it means you don't know how to use this wonderful creation called a search and need to create pointless threads.
took me all of 5 seconds to do what you didn't do. I mean even if you had typed what you think the screen showed, the auto fill feature would have pointed you in the right direction too
http://forum.xda-developers.com/showthread.php?t=1490903
Click to expand...
Click to collapse
thank you for responding, but i have been searching for days but i hadnt found this thread thanks a lot. and here is another problem: i have a folder named fastbood in c:/ which contains fastboot.exe, adbwinapi and adbwinusbapi.dll but in the cmd screen i failed to do what im supposed to do.
2: Located in the folder where the files are.
i dont know what that means
i guess i did it but it says waiting for device, so the computer doesnt recognize my device
You also need drivers.
All of that has been covered already. Did you search?
ravilov said:
You also need drivers.
All of that has been covered already. Did you search?
Click to expand...
Click to collapse
yes mate i have motorola device manager, as far as i know this the same thing right? just like samsung's kies
i really did tons of search but im almost hopeless. guys who have the same problem did solved it by just taking device to fastboot but mine is not going in that mode. when i plug the device its charger it says same problem and also says battery too low to flash. so im just gonna go and buy a new battery
mike4peace said:
thank you for responding, but i have been searching for days but i hadnt found this thread thanks a lot. and here is another problem: i have a folder named fastbood in c:/ which contains fastboot.exe, adbwinapi and adbwinusbapi.dll but in the cmd screen i failed to do what im supposed to do.
2: Located in the folder where the files are.
i dont know what that means
i guess i did it but it says waiting for device, so the computer doesnt recognize my device
Click to expand...
Click to collapse
yes you do. you just told us where you have the files. navigate via cmd to the folder that has fastboot in it
palmbeach05 said:
yes you do. you just told us where you have the files. navigate via cmd to the folder that has fastboot in it
Click to expand...
Click to collapse
now even if i have the necessary drivers (which come with motorola device manager) pc doesnt recognize my phone
also now my phone now says svf.... failed to boot... entering nflash recovery.... battery too low to flash and screen stays like this and phone gets heat (so we can say it's alive?)
The phone has been alive this whole time. I don't know why you said "hard brick" in the title, this has nothing to do with a hard brick. (Do you even know what a hardbrick is?)
You will need to charge the battery using another phone or an external charger. If you feel confident enough, you could try the trick where you strip a USB cable and connect the wires directly to the battery. (No idea what I'm talking about? Time to use search again.)
mike4peace said:
now even if i have the necessary drivers (which come with motorola device manager) pc doesnt recognize my phone
also now my phone now says svf.... failed to boot... entering nflash recovery.... battery too low to flash and screen stays like this and phone gets heat (so we can say it's alive?)
Click to expand...
Click to collapse
That's rsd mode, I think. From there you can flash an full sbf and start over
Enviado desde mi MB860
ravilov said:
The phone has been alive this whole time. I don't know why you said "hard brick" in the title, this has nothing to do with a hard brick. (Do you even know what a hardbrick is?)
You will need to charge the battery using another phone or an external charger. If you feel confident enough, you could try the trick where you strip a USB cable and connect the wires directly to the battery. (No idea what I'm talking about? Time to use search again.)
Click to expand...
Click to collapse
not hard brick? oh thank god, i said so because the phone does nothing
yeah i searched it before and its calldd factory cable, i havent done it yet but i tried usb jig which was a failure. no one owns an atrix around me, so i just need a external charger and right now im onto it
guys, i really appreciate your helps, im very glad to have you here thanks a lot. i will post here the results
man i told you, it's hard brick i guess.. because i charged the battery a bit then i opened the phone and the problem is the same again, it says entering nvflash recovery in about half a second screen goes black
mike4peace said:
man i told you, it's hard brick i guess.. because i charged the battery a bit then i opened the phone and the problem is the same again, it says entering nvflash recovery in about half a second screen goes black
Click to expand...
Click to collapse
What version of Ginerbread were you on and what did you flash via rsd? exact version and exact file please.
mike4peace said:
man i told you, it's hard brick i guess.. because i charged the battery a bit then i opened the phone and the problem is the same again, it says entering nvflash recovery in about half a second screen goes black
Click to expand...
Click to collapse
Here is short explanation what hard brick is:
Hard bricks are more or likely that you won’t be able to fix it. If you get a hard brick, your phone will not be repaired, there will be absolutely no way to without sending it to the manufacturer. This could be from wiping the entire system without flashing a rom, no way into recovery and no way to get it back. This could be also caused from bad installation files, or turning off/removing the battery from your device during the first installation or boot up sequence. Sometimes you can fix a hard brick, but more often than not your device is going to be broken. This is a fix that is required by the manufacturer of the device. Honestly if you get this, it may just be simpler to go get the device replaced instead of even trying to fix it. HOWEVER make sure you go out and read about it, typing in the exact problem and doing lots of research for your specific device as there may be some hope for the device somewhere.
Click to expand...
Click to collapse
Source: "Soft Brick Vs Hard Brick vs Broken" from Techychat.com by Anthony Burkett
Your phone doesn't get recognized by the p c? On linux you can check dmesg after you plug it to see anything, not sure about windows
Enviado desde mi MB860
palmbeach05 said:
What version of Ginerbread were you on and what did you flash via rsd? exact version and exact file please.
Click to expand...
Click to collapse
im not quite sure cause i bought this phone intentionally via ebay-like web site
yanick76 said:
Here is short explanation what hard brick is:
Source: "Soft Brick Vs Hard Brick vs Broken" from Techychat.com by Anthony Burkett
Click to expand...
Click to collapse
okay soft brick it is, but my phone doesnt do anything but show an error screen (and goes)
andresrivas said:
Your phone doesn't get recognized by the p c? On linux you can check dmesg after you plug it to see anything, not sure about windows
Enviado desde mi MB860
Click to expand...
Click to collapse
oh that is a good news, can you please tell this with a bit more detail? but here's what i understood: on linux ( i have ubuntu ) open terminal, after you plug your phone to usb port type "dmesg" and see something
i really appreciate all of your efforts thank you millions times
mike4peace said:
[...]
oh that is a good news, can you please tell this with a bit more detail? but here's what i understood: on linux ( i have ubuntu ) open terminal, after you plug your phone to usb port type "dmesg" and see something
i really appreciate all of your efforts thank you millions times
Click to expand...
Click to collapse
Exactly. try it with sudo, just in case (sudo is for run the command as root, with full privileges).
From there, you can go several ways
andresrivas said:
Exactly. try it with sudo, just in case (sudo is for run the command as root, with full privileges).
From there, you can go several ways
Click to expand...
Click to collapse
i typed just dmesg and there were several lines with words but nothing about the phone. lets say i found a jtag machine or whatever, can it recover my phone?
mike4peace said:
i typed just dmesg and there were several lines with words but nothing about the phone. lets say i found a jtag machine or whatever, can it recover my phone?
Click to expand...
Click to collapse
JTAG depends heavily on your ability to solder tiny surface mount components. Good luck.

Categories

Resources