Related
Hey all,
I've recently rooted and I'm loving it. Quick background, I've recently rooted using the erisuser1 tutorial at android forums (VERY VERY helpful thank you!). I demo'd a few different ROMs, and decided I really wanted to keep some SenseUI feel, so ended up with xtrSense 4.2. It's worked really well for me, but I may be trying more in the near future (recommendations are welcome!). After the load, I've also utilized SetCPU for OC'ing, which was the main impetus for rooting. Has that ever made a difference! However, the question remains, what next? First, there are a couple things I know I want to do...
1. Remove stock apps: xtrSense did a nice job of removing a lot of bloatware from the OS, but some still remain, i.e. Amazon MP3 and teeter. It seems the xtrSense ROM included scripts for use in GScript to remove these, but I have yet to get them to work when following the steps outlined in the xtrSense post here at XDA. Has anyone had success using this method? If not, shouldn't the mere fact that I have root give me access to removing these programs via another method? What other apps/processes are used to remove stock apps once root is achieved? Any help would be awesome.
2. A2SD, C2SD & C2C: Does anyone use these processes? If so, how has it been achieved? Again, it seems the xtrSense 4.2 ROM included scripts for use in GScript to added this functionality, but I have never seen an increase in internal memory after using the scripts. I have undertaken the prereq that is partitioning my SD card, and have yet to see any success. Have others been successful using this or another process to achieve A2SD, C2SD or C2C? If so, how? Also, are there any cons to doing any of these? Any help in this regard would be MUCH appreciated.
3. What have YOU done post-root? I'm very very happy with what root, ROM and OC has done for the speed and battery life of my phone. However, I'm certain there are a million more tweaks that can be done to improve the speed and user experience of this cool little device, and I would be love to hear what others have done to further enjoy using the Droid Eris. What are your recommendations? Feel free to let me know!
Ok, any help in these areas would be really appreciated. Thanks for reading through this long post, and know that I am also happy to share any knowledge in regards to the steps I have already taken to get to this point.
Thank you!
Make the rom your own! mess with the theme, install bootanimations, make your own boot.
Change the splash screen (skateboard screen) don't be afraid to mess with the system just make sure you do nandroid backups. Try to figure how to add the features by yourself, struggle with it a little, that's always fun. Follow a few tutorials, like when I was starting there wasn't much documentation on how to enable a2sd by changing the boot.img so I had fun figuring that out.
Hope this gives you a few ideas ;p
Edit: if you going to be messing with phone I would suggest adding a linux partition to your computer if you are a windows person. Makes your life easier no need to worry about drivers etc
Sent from my Eris using XDA App
Agree, wholeheartedly! I've been rooted since July, and have learned a lot using this forum. It's great to be able to change the boot logo screen, boot animations, etc. You can also improve battery life, increase speed, etc. After root, it's like having a new phone, and you have a greater sense of control over your device each time you learn something new. Have fun!
ckfalls said:
1. Remove stock apps: xtrSense did a nice job of removing a lot of bloatware from the OS, but some still remain, i.e. Amazon MP3 and teeter. It seems the xtrSense ROM included scripts for use in GScript to remove these, but I have yet to get them to work when following the steps outlined in the xtrSense post here at XDA. Has anyone had success using this method? If not, shouldn't the mere fact that I have root give me access to removing these programs via another method? What other apps/processes are used to remove stock apps once root is achieved? Any help would be awesome.
Click to expand...
Click to collapse
I don't know what to tell you, as removing stock applications with zach.xtr's Gscript process has always worked flawlessly for me. You may want to upgrade to the new xtrSENSE4.6 Beta that is out (you can find it by browser the more recent posts at the end of the xtrSENSE thread--Zach posted a link).
All I can say is that, when using Gscripts, make sure that you have "Needs SU?" checked. Aside from that, you just need to load Zach's scripts into Gscripts. After you load the scripts, have you pressed them? Just because you've loaded them into Gscripts doesn't mean they've run. You actually need to press on them to run them.
ckfalls said:
2. A2SD, C2SD & C2C: Does anyone use these processes? If so, how has it been achieved? Again, it seems the xtrSense 4.2 ROM included scripts for use in GScript to added this functionality, but I have never seen an increase in internal memory after using the scripts. I have undertaken the prereq that is partitioning my SD card, and have yet to see any success. Have others been successful using this or another process to achieve A2SD, C2SD or C2C? If so, how? Also, are there any cons to doing any of these? Any help in this regard would be MUCH appreciated.
Click to expand...
Click to collapse
I've used all of them at various points in time--I used to use A2SD and C2SD, but ever since C2C was developed I've had no need. In xtrSENSE4.2, I'm pretty sure C2C is enabled by default. So, you don't need to worry about it UNLESS you're running low on disk space. If you're running low, how many apps do you have installed (you should be able to store ~100 with C2C)?
ckfalls said:
3. What have YOU done post-root? I'm very very happy with what root, ROM and OC has done for the speed and battery life of my phone. However, I'm certain there are a million more tweaks that can be done to improve the speed and user experience of this cool little device, and I would be love to hear what others have done to further enjoy using the Droid Eris. What are your recommendations? Feel free to let me know!
Click to expand...
Click to collapse
My recommendation would be NOT to use SetCPU. I've found that running both of Zach's Gscripts for Max and Min CPU Speed has worked better--you won't need to wait for SetCPU to load up, be granted Superuser Permission, and then adjust your clock settings on boot. Plus, you'll have one less process running at all times, increasing performance.
Additionally, you may want to take a look at the xtrSENSE4.6 Beta that I mentioned previously. New, in that version, is the first ever inclusion of Collins_ph's Battery Tweak. Previously, it could only be used with Froyo ROMs. Enabling and configuring the utility will increase battery life because it gradually turns down the speed on your processor proportionally as your battery drains.
In terms of making the ROM "your own," I'd take a look in the Theme's thread. I can't provide you a list of everything that will work on xtrSENSE, but I can confirm that both the Minimal Matte Grey and Touch of Legend MetaMorph Themes do work for xtrSENSE. Also, you may want to check out LauncherPro (Plus), if you haven't already (www.launcherpro.com)... I absolutely love LauncherPro Plus, but I'm not "actively" using it. I'm really waiting on Fede to develop acceptable Photo and Music widgets to replace HTC's Sense Widgets (if anyone has suggestions on existing replacements, please let me know...). Having said that, I run a secondary "experimental" ROM on weekend--I run xtrROM with LauncherPro Plus. If you do decide to use LauncherPro, then I'd really recommend taking a look at xtrROM verses xtrSENSE.
Also, if you're a Sense fan, you might want to check out the newest version of KaosLegendary, V18. This is a port of a Tiawanese leaked version of HTC's forecoming Wildfire Sense UI. This is an Alpha Build at the moment and there are a few nagging issues, but it's neat just to use for half a day on the weekend to see how Froyo Sense will eventually pan out.
Finally, take a look at some of the Froyo ROMs that are built around CyanogenMod 6.0 (e.g. CELB Froyo; KaosFroyo; Tazz Froyo; and I think ShadowROM). Maybe you'll find that you like CyanogenMod better than Sense and stick with that?
Good luck!
P.S. In the future, you're probably better off posting something like this in the Q&A section.
I highly reccommend downloading Titanium and running a batch back up of all your apps and data. When you flash a new rom you can download Titanium again and restore your apps and settings (saves a lot of time if you become a flashaholic). Also grab Root Explorer. It's an app that allows you to access your sd card and your rom system. Wana change your boot animation? Save the file to your sd, open Root Explorer, copy it from the sd to data/local and reboot. Same goes for stock apps. Locate them and delete. Another valuable app is a terminal emulator. Open it up, type SU to obtain superuser permission, then a2sd check. This will tell you if a2sd is functioning correctly. Type a2sd help for a list of commands to use if it's not working.
Always Nand back up and you can flash any rom you want, play with it, screw it up, who cares....nand restore and you're back to point A. I highly reccommend trying a few Froyo roms. You'll need to partition your sd back to all fat32 or it wont recognize it. Froyo is faster than 2.1 and has a stock (somewhat different) a2sd. KaosLegendary is the only current Froyo rom with sense but it's fun to play with. WARNING - many users have bricked their phones using Clockwork. Some people love it but I'm afraid of it.
If you haven't already, try ADW or Launcher Pro. Once you decide you hate one and love the other (this will happen), you wont even miss sense.
Also download Metamorph and Busybox. You'll need these to theme your rom of choice (unless you find a flashable theme).
Now, put your phone down, get back to work, and for God's sake tell your wife you love her. You haven't even talked to her in weeks!!
Sent from my nonsensikal froyo using XDA App
joshw0000 said:
I highly reccommend downloading Titanium and running a batch back up of all your apps and data. When you flash a new rom you can download Titanium again and restore your apps and settings (saves a lot of time if you become a flashaholic).
Click to expand...
Click to collapse
Great post! +1 on Titantium Backup and Root Explorer--I use both.
Just a note: With Titanium Backup, I recommend scheduling it to backup both Apps + System Data and syncing it with Dropbox. This way, if something should happen, like your SD Card becomes corrupt and you can't Nand Restore, you'll be able to reflash your current ROM and Restore all Apps + System Data, since you're having a scheduled backup taken and stored in your Dropbox folder as well.
Having said that, when flashing a NEW ROM or UPGRADING, remember to Restore "Apps + Data" but NOT to do the "Restore Apps + System Data." This will ensure that if the developer of your ROM has changed any system files, they won't be messed up. Sure, it'll take you 10-15 minutes to get your ROM the way you want (e.g. Home Screens, Systems Sounds, Notifications, etc.) but it's worth it to know that everything will work properly. Since your applications and their set up have nothing to do with the ROM, you can rest easily knowing that at least they'll come back configured as you left them for the most part.
KarateExplosion6 said:
Great post! +1 on Titantium Backup and Root Explorer--I use both.
Just a note: With Titanium Backup, I recommend scheduling it to backup both Apps + System Data and syncing it with Dropbox. This way, if something should happen, like your SD Card becomes corrupt and you can't Nand Restore, you'll be able to reflash your current ROM and Restore all Apps + System Data, since you're having a scheduled backup taken and stored in your Dropbox folder as well.
Having said that, when flashing a NEW ROM or UPGRADING, remember to Restore "Apps + Data" but NOT to do the "Restore Apps + System Data." This will ensure that if the developer of your ROM has changed any system files, they won't be messed up. Sure, it'll take you 10-15 minutes to get your ROM the way you want (e.g. Home Screens, Systems Sounds, Notifications, etc.) but it's worth it to know that everything will work properly. Since your applications and their set up have nothing to do with the ROM, you can rest easily knowing that at least they'll come back configured as you left them for the most part.
Click to expand...
Click to collapse
Perfectly explained, nice job sir. This should be in the rollup!! Too many people make the mistake of restoring sys data from a older rom to newer, have to watch that. Rollup
My article at http://jonsuh.com/2010/09/make-your-droid-eris-faster-smoother-and-increase-battery-life-how-to/ will give you a whole mess of ideas of what you can do post-root. Hope this article helps!
Remember, these are just my suggestions, they are not necessarily the law. Some may disagree with my suggestions, some may work well for you, other may not as well as one may think. They are just pointers to get you in the right direction
KarateExplosion6 said:
I don't know what to tell you, as removing stock applications with zach.xtr's Gscript process has always worked flawlessly for me. You may want to upgrade to the new xtrSENSE4.6 Beta that is out (you can find it by browser the more recent posts at the end of the xtrSENSE thread--Zach posted a link).
All I can say is that, when using Gscripts, make sure that you have "Needs SU?" checked. Aside from that, you just need to load Zach's scripts into Gscripts. After you load the scripts, have you pressed them? Just because you've loaded them into Gscripts doesn't mean they've run. You actually need to press on them to run them.
Click to expand...
Click to collapse
Ah, the tapping!! That did it. Also messed around (again) with titanium to get it to work, fig'd that out as well. Rookie mistakes...
KarateExplosion6 said:
I've used all of them at various points in time--I used to use A2SD and C2SD, but ever since C2C was developed I've had no need. In xtrSENSE4.2, I'm pretty sure C2C is enabled by default. So, you don't need to worry about it UNLESS you're running low on disk space. If you're running low, how many apps do you have installed (you should be able to store ~100 with C2C)?
Click to expand...
Click to collapse
Yes you're right C2C is default, I guess I'm just not certain if it's working. Apparently, there are two blocks on internal storage being used for apps in 4.2: /data/ and /cache/. I have 56mb free according to internal memory settings (/data/??) and 87.7 of 130mb used in /cache/ according to the report setting gscript Zach made. According to AppBrain I currently have 33 apps installed. 33 apps, ~100mb used already? Average of 3mb per app?? That just didn't seem right to me...maybe I'm just plain wrong. Opinions welcome!!
KarateExplosion6 said:
My recommendation would be NOT to use SetCPU. I've found that running both of Zach's Gscripts for Max and Min CPU Speed has worked better--you won't need to wait for SetCPU to load up, be granted Superuser Permission, and then adjust your clock settings on boot. Plus, you'll have one less process running at all times, increasing performance.
Click to expand...
Click to collapse
I may try that, although in full disclosure, my main reason for rooting and OC'ing was for running game console emulators. They run SO much better since OC'ing. I did try Zach's max out of the box (710 max?), but I find that my SetCPU main setting of 768,528 during normal usage makes operation even more smooth and especially works best when emulating. I want to OC even when battery is lowering until it gets to the condition threshold i set in SetCPU (amount or temp). But I still may try his scripts and lose SetCPU, thanks for the idea.
KarateExplosion6 said:
In terms of making the ROM "your own," I'd take a look in the Theme's thread. I can't provide you a list of everything that will work on xtrSENSE, but I can confirm that both the Minimal Matte Grey and Touch of Legend MetaMorph Themes do work for xtrSENSE. Also, you may want to check out LauncherPro (Plus), if you haven't already I absolutely love LauncherPro Plus, but I'm not "actively" using it. I'm really waiting on Fede to develop acceptable Photo and Music widgets to replace HTC's Sense Widgets (if anyone has suggestions on existing replacements, please let me know...). Having said that, I run a secondary "experimental" ROM on weekend--I run xtrROM with LauncherPro Plus. If you do decide to use LauncherPro, then I'd really recommend taking a look at xtrROM verses xtrSENSE.
Click to expand...
Click to collapse
So here's my questions with this: Don't apps like MetaMorph and Launcher run on top of everything that the ROM already has going on, thus adding another cumbersome running process to the already limited hardware? Wouldn't running this be akin to having two GUI's on the phone, or am I looking at this the wrong way? I'm assuming that's why you recommend switching to the more vanilla xtrROM, but maybe I'm off.
I also do badly want to try some additional ROM's once I have the time. The leaked Froyo with Sense ROM does sound intriguing and I may pursue that next.
Thanks for all the help, really appreciate the replies!
Will go the Q&A route next time too, thanks.
KarateExplosion6 said:
Great post! +1 on Titantium Backup and Root Explorer--I use both.
Just a note: With Titanium Backup, I recommend scheduling it to backup both Apps + System Data and syncing it with Dropbox. This way, if something should happen, like your SD Card becomes corrupt and you can't Nand Restore, you'll be able to reflash your current ROM and Restore all Apps + System Data, since you're having a scheduled backup taken and stored in your Dropbox folder as well.
Having said that, when flashing a NEW ROM or UPGRADING, remember to Restore "Apps + Data" but NOT to do the "Restore Apps + System Data." This will ensure that if the developer of your ROM has changed any system files, they won't be messed up. Sure, it'll take you 10-15 minutes to get your ROM the way you want (e.g. Home Screens, Systems Sounds, Notifications, etc.) but it's worth it to know that everything will work properly. Since your applications and their set up have nothing to do with the ROM, you can rest easily knowing that at least they'll come back configured as you left them for the most part.
Click to expand...
Click to collapse
Great thank you both! I will take both of these posts into account when using Titanium before I go further down the ROM rabbit hole.
About a month ago some of you may remember my posts that I was working on a kernel. Here is my first public release. The whole thing works at about 95% or so.
==============
The advantages I notice while using it besides the normal issues associated with Eclair are as follows:
1. Memory management has changed (has good and bad effects) Good: when you fly through 45 websites the browser does not crash as it eats memory. Bad: when you blow through 45 websites the browser will hang (easy fix hit home, and use app killer to free memory from apps you are not using) (Personally I like not losing my place as I get lost in the web, it also will prevent apps from dieing in the background when you are using multiple apps at the same time, if memory gets low enough the OS WILL KILL the offending apps). I personally found Eclair for Fascinate to handle memory available worse than this kernel, and I find this kernel handles memory more like Eclair on the Moto Droid did, and the Moto Droid had far less memory to work with.
2. UI has a faster response vs stock kernels, the kernel is also running AS scheduling vs BFQ but I updated BFQ to run as well if you want to revert.
3. Internet Connectivity appears to be faster with those apps that properly use the API. Web browsing, CheezeBurger, youtube etc all load content faster (efficiently? / Maybe related to memory management?)
Want something added to this list? Post your requests, just please be reasonable If I like the idea I will try to implement it. Remember this is for kernel features not system ROM modifications.
==============
Issues to fix (ToDo List, I am working to fix these issues / Updated 01/30/11):
1. Investigate and address bluetooth connection issues [ Confirmed that this issue does not affect everyone / or all bluetooth devices ]
2. Investigate and address remaining data connection issues (Orbot activates and test show as using tor on normal websites, tor addresses fail to connect to servers, also Orbot is unable to de-activate [Confirmed]
3. Investigate and address remaining camera crash issues [ Please zip and send in logs from /proc/kmsg, specify if you used the volume control zoom or pinch to zoom ]
4. Improve on touchscreen timing for quick flicks on the first attempt without burning up processor time.
5. Investigate and fix stutter/crash on camera zoom followed by attempt to take photo.
Notice something that should be in this list? Please make a post describing your issue, remember to include the kernel version/rom and the steps you performed to reproduce the issue.
==============
For those doubting, this IS 2.6.29.6, I personally merged the code myself, IT IS NOT 100% COMPLETE. Some drivers still need merging, and the V4L2 code is not completely converted because Fascinate uses different (updated?) V4L code (compare Fascinate's Eclair to Eclair on AOSP)
If anyone wants to help bug hunt I will forever be grateful. I would like to finish squashing bugs in this in the next 2 weeks as I really want to attempt to work on a Froyo for Fascinate. Even if it uses Eclair code to run the only RIL code we have.
I also semi-blindly fixed about 50-100 coding problems in the Eclair Kernel, varied from not returning data from a function that should have, simple void definitions that were returning when they had no data to return and no function collected it. Correcting order of operations in if statements. Declaring data types that were vague (unsigned vs signed). You will notice it compiles a lot cleaner...attempting to fix the camera code nearly kills the camera completely, I am thinking the broken code dumps variables by accident that the corrected code does not.
Edit: I wanted to share a few things every dev (some of it specific to kernels) should remember when nights are long and sleep is a half world away.
1) Keep a backup of your most recent WORKING work safe, because it is too easy to....uh oh *[email protected]$
2) If you edit the config file, remember to make clean and make mrproper before you make, otherwise your still on your original config file (a copy of the one you actually edit .config)
3) Do not put comments to the right of options in the kernel config file...apparently they will be discarded (the entire option line, not the comment, you'll see it in your compile error message logs).
4) Automate the mundane, I have a nice build environment setup, I type one line and it will make a brand new kernel from scratch (I'll be sharing that later, keep an eye on this post)
5) Work with what you have, don't wait for someone else too. Somewhere, someone is working on something better, and tomorrow it will be out.
6) Laugh...at something...anything because lets face it, you make better decisions in a good mood, in a bad mood...entire trees (code) die, either from rm -Rf /work/crap//* or a sledgehammer to the motherboard. Which brings us back to the first thing to remember, where did you put that backup...different drive I hope?
Attached is a working kernel, it will have issues using DI01 (such as no vibrations), it works great with DJ05 ROMS and maybe DL09 system roms. At this time I can not recommend a DL09 system rom with this kernel, during my initial tests it appears to drop GPS and cell data connectivity frequently resulting in having to relock on GPS satillites, and losing data connections in networked applications.
I highly recommend the setup I am running, DL09 Radio, Son Of Skywalker Blackhole v2.4 and this kernel (if you can handle the few bugs that is, it is beta).
Please feel free to post bug reports please include detailed information about the issues, I AM NOT FIXING APP PROBLEMS. Please remember to only report kernel issues and information specific to the kernel crash. If an app crashes on other kernels and not just this one please do not submit a report. This kernel is NOT setup for debug info, I will post one setup with debug turned on later. Right now, play around with it and report your results! Enjoy and have a great time :-D
GITHUB: https://github.com/sirgatez/
Edit 1: I thought I would mention that I originally started with the JT1134 kernel source from late Nov. - mid Dec. and the Samsung Fascinate stock source (from Samsung's Opensource website) then I merged in source from 2.6.29.6 from www.kernel.org and from Cyanogen's 2.6.29.6 Eclair kernel. I stopped on 2.6.29.6 instead of moving higher because of 1 reason, once you step in to 2.6.30 there are major driver changes requiring a lot of double verification and back trekking....In a few words, it is lots and lots of work, and I think that jumping from 2.6.29 to 2.6.29.6 will help transition to the 2.6.30 (Froyo?) series of kernels because then the majority of the work is in restructuring the driver code (which would likely best be done backwards, from the system .h files, to the .c handlers, down to the device drivers) from Samsung to match that in the stock 2.6.30 set. Complexity will be reduced by a measurable amount
Notes 1: Samsung's Android code has some significant differences under the hood from AOSP Android code, I have not sorted it all out yet, but it is possible that without an AOSP stock system that a full kernel update to the current AOSP code may not be possible. There is a built in virtual CD driver for what appears to be hosting the ISO built into the base Samsung system image, I have not opened the image yet but it appears to perhaps be drivers? Also it does not sleep the SD card like standard AOSP does, attempts to do so will disable the SD card from use with no ability to remount without a battery pull. (This is in 3 of 4 lines of code that AOSP had that must be commented out from the Samsung kernel for this SD issue to be prevented). For those wanting it, CIFS and NFS are compiled modules in this kernel. The current kernel is not over-clocked, and does not have voodoo. It does support both with a kernel configuration edit required for voodoo with the proper init scripts, and over-clocking requires changing just a few files and recompiling, I did neither as I wanted a true comparison to compare changes against the original stock kernel. The kernel does have the BLN notification code built in. BLN, Voodoo, and Over-clocking code are not my own creation they are pulled from their respective creators.
REMOVED ALL OLDER KERNEL INFORMATION
Update RC3 v2.2.4-VooDoo/NoVooDoo: This is a minor/major (depending who you ask) bug fix to adjust the processor throttles. Think I've got it too set to a good sweet spot now, the peaks are steep and a little harder to climb but the falls are also quicker. After turning it my phone on with it last night and about 2 hours of use I went to sleep, wake up a couple times to silence various alarms (I wake to wake up, but I want to sleep a little more, can't I do both?), and these are the numbers that setcpu reports for time in state:
1.2Ghz = 0 (Had the phone thottled to 1.0Ghz for this test, but with 1.2 on it only uses it when it needs it, might could leave it on?
1.0Ghz = 164978 (Not such a big a number as before)
0.8Ghz = 292008 (much more reasonable than before, could be a little lower)
0.6Ghz = 117672
0.4Ghz = 114250
0.2Ghz = 104715
0.1Ghz = 2965562 (This is what I was aiming for proportionally for 0.1Ghz)
Remember these times are mostly from idling, the idea was to reduce clockspeed when not in use to save some juice. The phone might take a moment to wake up from idle, but once it is going you shouldn't feel hardly any difference between this and RC2. Bootup clockspeeds from your first 3-4 minutes will almost always remain in the top tier due to applications still loading, media scanner running, etc.
Update v2.2.4-VooDoo/NoVooDoo: This is a major fix kicking us out of RC status and into actual release. Now for the menu, prepare your appetite, for the appetizer we'll be serving a much demanded voodoo color fix, and voodoo sound fixes. Followed by a main coarse of throttle tweaks, throttle shift updates (these are new they decide what the next cpu speed will be when a throttle is exceeded up or down, every kernel to my knowledge including my last used the default for a 5 slot kernel, here is a true 8 slot), and for desert a reduction in logged touch screen data from the touch screen, and an additional surprise to everyone, a reduced cpu load when using the touch screen!
Apparently the touch screen had authority to force the cpu into any slot it wants, it defaulted to slot 1 (which was 1.0Ghz for Blazed, now it's 1.2Ghz). The result of which meant that if you pressed the touch screen your cpu load catapulted up to 1Ghz for as long as you touched it even if you only held your finger in one place with no apps open. I have changed that to only go to 400Mhz, we'll see how this goes, if anything we might bump it to 600Mhz, so far besides a slightly slower response when first touch my touchscreen after leaving it alone for a long period it doesn't effect normal use from one app to another. If your processor is already at 400Mhz or higher it will not up it further. You will find this kernel will likely end up being the most battery conscious you have ever seen, once you get things moving the speed follows. If you find this kernel has a slower response than you feel it needs let me know, because when I fixed the touch screen from blasting the cpu load through the roof, it through off my throttle settings some, now they may be too conservative, report back and we'll fix them if it is a problem. Ah yes, please don't forget to tip your waiter if you enjoyed the service... [ REMOVED - Aggressive throttles not configured for use without aggressive touchscreen driver ]
Update v2.2.4R2-VooDoo/NoVooDoo: This is a minor fix to correct the choppy feeling that v2.2.4 had, the choppiness was due to aggressive throttles to fight off the excessive high speeds the touch screen forced on. This should correct those issues. Unless I have another bugfix for 2.2.4, I will be adding 1.1Ghz in the next release making it a total of 9 slots. The higher speeds still need some tweaking, if your looking to hit benchmarks please set min and max to the speed you are testing, otherwise the throttle is trying to save you power that doesn't need to be used. But for everyday use, these settings should be good
Update v2.2.5-VooDoo/NoVooDoo: Voodoo sound is still broken, anyone have the patched files I could compare to? The screen should be about 15% dimmer than it usually is on the lowest setting (and scaled up from there to 100% at max), I found the dimmest setting just too bright in the dark for my self, and hopefully it will help me save a little extra juice because I usually use my phone on the lowest brightness setting anyway. Major fix to throttles, now they are better tailored to this many slots. Slots updated to 9, 100Mhz, 200Mhz, 400Mhz, 600Mhz, 800Mhz, 1.0Ghz, 1.1Ghz, 1.2Ghz, and 1.3Ghz. Increased processor voltages (my ultra low voltage was about 25uv lower in most slots than everyone else who has a uv kernel...I was a little too aggressive on that one). Update bluetooth driver, it should remain connected now, could someone please verify this? Stability has improved alot with the higher voltages and better handling of throttling for different situations. Several other pieces of hardware discover that have authority to play with processor. I capped highest touch screen processor forced at 600Mhz (the higher I set it the faster your battery goes, default stock is 1Ghz), and all other hardware at 1Ghz (not very many requests, but this is where rouge 1.2 use came from). If you had issues before except for camera zoom or data connectivity in apps give Blazed another try. The slightly higher voltages should improve a lot of the random issues people were having. You may see an improvement in cellular signal now, 1.3Ghz is also stable, but I wouldn't run it all day either due to heat generated etc...Well I hope everyone enjoys, this should be the best release of Blazed Yet!
Update v2.2.6-VooDoo/NoVooDoo: This is a major fix for cellular signal issues many people have been having, the issue again was related to timing and the kernel modules not waiting long enough for the modem to respond before proceeding with action resulting in errors that caused a disconnect or forced a modem reset (requiring a phone reset to regain signal). I found waiting too long only slowed the entire phone down, so I opted to go with nanosecond wait times, waits that short however are active and will warm the phone up some, please report back if it becomes an issue as I am looking for a better wait device than udelay, preferable more like sleep that doesn't keep the processor busy. There is some performance stutter in the phone on the high end of internet connectivity speeds, but your not going to be losing your connection either, I'll continue to attempt to improve on this issue later on. [ REMOVED - Timing further improved in v2.2.7 ]
Update v2.2.7-VooDoo/NoVooDoo: This is a minor for that makes a major difference. Improved timing for communication with GPIO/modem this should be the end of the majority of network connection issues. It was entirely a mailman problem, put package in box, check for package, package still there? no=do other stuff/yes=...wait,repeat at package still there?, etc. The fix is put package in mailbox, wait long, check is package still there? no=do other stuff,yes=short wait and check again...Hope this helps alot of you out, I am aware the touch screen is a little slow to respond and I will be looking into that issue. This little fix should also improve usable speed over v2.2.6 because the waits are better timed.
Update v2.2.8-VooDoo/NoVooDoo: Timing is everything with electronics and this post...as promised today before 11:59pm is v2.2.8. Working Voodoo Sound v4, updates to the dpram/dpio communications again improving connection stability, if you lose your connections please report back (permanent loss requiring a restart only, fluctuations are different issue). Throttles set a little more aggressive about 5% so (helps ease on light loads), stepped up the first throttle jump from 100mhz to 400mhz (touch screen snaps back now). Dropped the 1Ghz permission for misc hardware to 400mhz if you have issues let me know, touch screen retains it's 600mhz permissions. Also screen brightness is reducible to gamma 1 brightness 10, typically reserved for battery about to fail status (I found the lowest setting just too dang bright). Enjoy everyone! I've been hammering away on this since 7am this morning and only had voodoo sound working about 9am. Thanks to JT1134 for his prebuilt kernel containing voodoo sound v2 working, adding v3 & v4 was a snap after that. Please report if you have any issues with it and remember you MUST be using the new voodoo sound app from the market.
Update v2.2.8R2-VooDoo/NoVooDoo: Another dpram timing adjustment (will lower your upload speed a little but will be more stable in operation, down speeds should be around 200KB down 44KB up on a good connection). Adjusted 1.1Ghz dividers per nemesis (not sure that it looks right, appears to get better benchmarks than 1.2 now will follow up on it). Made throttles a little more aggressive, 2.2.8 looked all over the place and having difficulty controlling processor use.
Update v2.3.0-VooDoo/NoVooDoo: Alot of work went into fixing dpram.c and multipdp.c it seems they were incompatible from the very beginning resulting in alot of ril issues and stability problems not just on my kernel but others as well, especially with nonstandard clocks and multiple slot kernel. I also added a fix to the framebuffer courtesy of JT1134 that has long since been overdue but a rare bug most probably have never seen. I fixed all the timing in dpram.c I also fixed the non-matching buffer sizes for multipdp and dpram (they talked to each other using different sized buffers...come on?!) There are still some bluetooth compatibility problems and the camera may still crash on zoomed photo, but I'd say it's 100% out of Beta! Enjoy! :-D I will be working on a Froyo kernel so stay tuned folks!
Update v2.3.0R2-VooDoo/NoVooDoo: Minor fix to help prevent dpram crash by handling and disposing of invalid commands sent to dpram, should fix seeming random lockup. [ Edit: corrected incorrect version numbers in original v2.3.0 series xda posts, thanks to s44 who caught the error, this does not affect kernel downloads, this were named correctly ]
Update v2.3.1-VooDoo/NoVooDoo: I reduced the delays in the ce147 camera driver, repairing the dpram driver resolve many of the seemingly random issues that had once plagued Blazed. Also a special treat for all you Blazed users, a new voodoo sound option that I have named "HEADPHONE_STICK" essentially the option when enabled (per boot) will force all audio directed to the external speaker to be instead directed to the headphone jack if the headphone jack has a plug in it. I find it excellent for not disturbing others around me with notifications when I would rather the phone be silent but I have headphones plugged in. Also excellent for using that awesome amp you have in combination withr you fascinate to wake you up in the morning. I will be contacting the maker of the Voodoo sound app in the market to get this option added to his application for quick and easy access. Also a major rework in the way kernel modules are loaded, all modules non-essential to booting are now stored in /system/kmodules. So if you reflash your system folder reflash your kernel or it may not boot, a quick browse will reveal what modules are kept there, I have more readily compiled and will release a separate "modules only" update.zip for those interested. By moving the modules it will allow for more options that are only available for including in the kernel boot image.
Update v2.3.1R2-VooDoo/NoVooDoo: Reverted some of the CE147 delay changes, reducing all of them caused some minor camera instabilities. EXT3/EXT4 moved back into the kernel, for some reason even with it's depends loaded ext4 doesn't load correctly as a module (resulted in broken boot on voodoo, now fixed). Also You MUST USE RED CLOCKWORKMOD TO FLASH IF USING VOODOO, you may use green clockwork only if Voodoo is NOT enabled due to the fact that some modules required for bootup are now stored on the system partition and if your using Voodoo only red clockworkmod has access to it. Also if you flash a different system or restore a backup you must reflash the kernel to ensure your modules are up to date. Also is a new file KMODULES-FULL contains all of the modules I have been compiling for Blazed thus far, several nifty ones but I have not setup any of the configs to use them, anyone versed in Linux command line can utilize them or setup scripts to use them, have a look inside the zip too see what there is to play with, request and I will add more if the module could prove useful to others. Several of the modules in FULL are also in the Kernel due to being required for startup redundancy (such as the 3D video/LCD drivers etc, which without a Android system folder, Android won't boot, nor will it boot without these modules so system seemed like a reasonable place to store them. The kernel/initramfs file is less than 6MB with Voodoo due to moving these modules to the system folder. I plan to add ClockworkMOD as soon as I have time to test it, then Blazed will also work for Recovery.
The Great Voodoo Debate: I have also been benchmarking Blazed against stock, to determine the difference Voodoo has on the kernel, so far it would appear Blazed has modifications either in the file system handling or the manipulation layers that are nearly equal to negating the speed lost to RFS's use before Voodoo or EXT4 is even brought into the equation. Just compare Stock vs Blazed (novoodoo) using 'RL Benchmarks SQLite Performance" from the market. A difference of 33.246 seconds in favor of Blazed, my preliminary results are (124.944 Seconds Blazed-NoVoodoo) (158.19 Seconds Stock) using the same exact system install less than 20 minutes apart between boots, with over 300 applications installed and several running like any other day. Based on this alone I find Quadrant is at least partially flawed at measuring proper I/O transfer timing, and I would NOT rely on it for an accurate benchmark in regards to I/O at this time until the issue is resolved by the Quadrant team. Voodoo does not produce the outlandish high scores that Quadrant makes out that it does, and Blazed is plenty fast in I/O even with RFS in use as shown by these preliminary results that any one of you can verify on your own using the "RL Benchmarks SQLite Performance" application, Voodoo does improve transfer compared to RFS in my tests but I am still putting together the results on Blazed NoVoodoo vs Blazed Voodoo. But as far as a 1800+ or 2000 score, so far my results say it just doesn't look realistic...sorry guys. On the flip side, if there is an error in my kernel causing a misread on the score you guys are welcome to help me find it and I will push the correction, but right now it looks like the issue is in how Quadrant measures I/O time, and I think non-atomic disk writes are the reason for the high scores, theoretically they would return claiming data is written to disk almost immediately when in reality it is still in memory and the kernel will write it to the disk at later time without the write time being considered as part of the benchmark (Google: write-caching, also known for providing significant performance improvements over atomic-writes).
If you appreciate Blazed and enjoy using it, please consider making a donation. Thank you for trying it out and have fun!
My initial impression after playing around with it for 15 minutes:
Seems to have given my phone new life/snappiness back that it had when I first installed super dark rom and stupidfast 1.54. My phone seemed to be bogging down lately. The internet definitely feels quicker too.
So far so good!
will try, thank you for the release.
Great work!
Sent from my Galaxy-S Fascinate
I don't want to turn you away from your work, but have you considered heading over to IRC and joining the guys working on Gingerbread? I'd assume that the more competent people working on it, the better.
Great work, the kernel seems to have given new life to my test fascinate! ADB does however appear to be dead (I got error device not found every time I tried to connect) Other than that I have no complaints, keep up the good work
That is very odd, as I have not had any issues using adb. Please reload your drivers to be safe and double check debug mode has not accidently become disabled. I wired up my fascinate just now and confirmed that ADB is working. (It was invaluable in working with the camera crashes). Also it maybe related to a conflict in the system rom vs the kernel. I personally have not have any issues with DI01 Fascinate stock, and everything worked great using DL09 radio, DJ05 system from SonOfSkywalker (BlackHole 2.4). Right now I am running DL09 Radio, DL09 System Rom from SonOfSkywalker v3, and my kernel from this post, thus far no issues. I am using Ubuntu v9.04 to test right now, and not windows to confirm that ADB is working. I will check on windows later today when I have a chance.
anyone else having an issue with bluetooth? It says "Turning On" but does not turn it on just reverts back to "off" status.
I still have DJ05 modem and on blackhole 2.3 something but updated market and swype maunally.
Camera force closes when you go to zoom in.
Sent from my SCH-I500 using XDA App
I assume disabling voodoo would be a prerequisite to installing this kernel? Though I'm curious what partition scheme are you using for this? Is it using samsung's default filesystems for /system /data etc?
EDIT: Forgot to say, this is re-gosh-darn-diculously awesome, thanks for your hard work.
wizang said:
I assume disabling voodoo would be a prerequisite to installing this kernel? Though I'm curious what partition scheme are you using for this? Is it using samsung's default filesystems for /system /data etc?
EDIT: Forgot to say, this is re-gosh-darn-diculously awesome, thanks for your hard work.
Click to expand...
Click to collapse
Yes, you MUST disable voodoo before using this kernel. I will put together a voodoo and OC flavor of this for those interested later. As of now I have only been working with non-OC and non-Voodoo in this kernel to gauge how the work changed the experience.
Edit: Oh yes, it uses the default partition scheme. It is a goal of mine to eventually change the formats of partitions (similar to voodoo) but keep the layout, it is my thought that doing so provides the largest window of compatibility between stock Samsung/VZW Roms and custom Roms. With a proper recovery, the change could be performed and backups and restores would work no matter the format of the internal media as the layout remains the same.
I tried this kernel briefly. I couldn't get my computer to recognize that the phone was plugged into it. I use my phone for tethered net access. Deal breaker for me. It would beep once like it was going to work as normal when plugging in an accessory and then beeped three more times in quick succession like the cord was being pulled.
Sent from my SCH-I500 using XDA App
bwheelies said:
I tried this kernel briefly. I couldn't get my computer to recognize that the phone was plugged into it. I use my phone for tethered net access. Deal breaker for me. It would beep once like it was going to work as normal when plugging in an accessory and then beeped three more times in quick succession like the cord was being pulled.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Yea my phone is not recognized by the computer either, even after a restart.
Naturally I double checked usb debugging and the drivers (adb connected to my white fascinate just fine and I made a jump back to Geeknik's test kernel to double check that something hadn't died in ole blacky and it registered there as well) I wonder if its just this fascinate (as it has had a laundry list of its own issues). This phone is running Superclean DJ05 completely stock and was fresh off a complete wipe and restore
bwheelies said:
I tried this kernel briefly. I couldn't get my computer to recognize that the phone was plugged into it. I use my phone for tethered net access. Deal breaker for me. It would beep once like it was going to work as normal when plugging in an accessory and then beeped three more times in quick succession like the cord was being pulled.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I can confirm that I am unable to access the phone via Samsung's drivers using Windows XP. [Added this too my list]
Wireless tether does work in case you need it, that is why I hadn't noticed this issue. Good catch!
I really like the transparency of your work. It's refreshing to actually read about the process you're working on and the way you explain it definitely makes seems like you have a good grasp of what's going on. I can never quite tell with the other devs. Anyway good luck!
FDro said:
I don't want to turn you away from your work, but have you considered heading over to IRC and joining the guys working on Gingerbread? I'd assume that the more competent people working on it, the better.
Click to expand...
Click to collapse
Agreed! If they can get GB running nobody is going to be interested in Eclair or Froyo.
I like the sound of this kernel. Imma flash it when i get home. Looking forward to seeing the OC version
SCH I500 Super Clean v.9 DJ05 Revolution 3.6 OTB oc'd lv1200 Voodoo5
2 SirGatez.
It sounds like you are pushing towards performance optimizations. Have you checked supidfast sources? I tried it before geeknik left and it was significantly faster then stock. May be you can get something from him.
I really appreciate what devs do here, cool stuff! However I do not understand why that much talent spend in vain... Every developer has his own build, mods and bug fixes. Is this real open source spirit to have so many versions? Looks like brownian motion to me.
Now, you can say that I'm free to do it on my own etc, as other devs pointed here. But, full fledged development it not for everybody by various reasons. I hope it is obvious. Would be nice to see some consolidated development! Then it will be much more easy for mere mortal to contribute to that product. We all have same phone!
Once again I do not want to upset anybody.
bendbowden said:
Great work!
Sent from my Galaxy-S Fascinate
Click to expand...
Click to collapse
Also, great write up! I will report back if I notice any bugs not mentioned above.
[?] [Script] V6 SuperCharger !! HTK & BulletProof Launchers! FIX MEMORY FOR ALL ANDRO
so far nobody has mentioned this, not even sure how many people look in this section of the forums, but here goes.
anyone out there willing to test and port this over for fascinate?
http://forum.xda-developers.com/showthread.php?t=991276
general info:
Main points:
- CUST-OOMIZER! Use your settings without Autokiller Memory Optimizer or Auto Memory Manager!
- For newer phones with lots of ram, use the 3rd slot to set how much free ram you want.
- If you have /system/etc/rootfs/init.mapphone_umts.rc, it makes a backup and edits that single file. This is nice and tidy.
... Thank to kabaldan for pointing out the importance of certain things.
- Most Custom ROMs - If you have a /system/etc/init.d folder, it creates 99SuperCharger in there and edits /data/local.prop (20 entries added for adjusting priorities and groupings). You shouldn't need to configure anything else.
- Stock ROMs - If you have neither, it creates /data/99SuperCharger.sh which you can load up on boot (run as root) with Script Manager. The OOM groupings work as well since it happens on boot in local.prop (20 entries added)
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
In case of any error, you will find a related help file in the root of your SD card.
So... I think this covers ANY Android ROM
It also determines if you're using Script Manager and gives appropriate information/tips/help files depending on what other factors are present.
The above is really ALL YOU NEED TO KNOW.
The V6 SuperCharger script does everything!
Anything below is extra info!
It's just a single file... 806 lines (807 if you count the blank line at the end LOL)
So... What's it do?
It makes your phone FAST... super snappy with better multitasking!
If you read between the red lines below (parts 1-3), you'll see that at first it was only about minfrees and launcher redraw.
But after installing GingerBread, I saw that it needed more work than Froyo LOL.
Groupings were ALL MESSED UP and made NO SENSE to me whatsoever...
So I figured out how to group them more like CM6 (Froyo) but that still wasn't good enough...
I further rearranged the OOM Groupings and Priorites and lowmemorykiller values for a...
COMPLETE MEMORY MANAGEMENT FIX!
That's basically what this is
Faster than ever, no launcher redraws, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
Upon installation, V6 SuperCharger will first clean up any previous supercharging so none of your files get cluttered.
But if you toggle between Hard To Kill and BulletProof launchers, the memory adjustments aren't affected.
So you can leave your minfrees at stock/default settings and apply the Hard To Kill Launcher and still get the OOM Grouping/Priority fixes.
So if you love your ROMs memory settings, just try the HTK Launcher/OOM Fix... you won't regret it
Ah, I used this script on my wife's Eris, and it did fix the speed a tad, no clue how it would react on an already fast phone, but hell, any little bit helps.
Izeltokatl said:
so far nobody has mentioned this, not even sure how many people look in this section of the forums, but here goes.
anyone out there willing to test and port this over for fascinate?
http://forum.xda-developers.com/showthread.php?t=991276
general info:
Main points:
- CUST-OOMIZER! Use your settings without Autokiller Memory Optimizer or Auto Memory Manager!
- For newer phones with lots of ram, use the 3rd slot to set how much free ram you want.
- If you have /system/etc/rootfs/init.mapphone_umts.rc, it makes a backup and edits that single file. This is nice and tidy.
... Thank to kabaldan for pointing out the importance of certain things.
- Most Custom ROMs - If you have a /system/etc/init.d folder, it creates 99SuperCharger in there and edits /data/local.prop (20 entries added for adjusting priorities and groupings). You shouldn't need to configure anything else.
- Stock ROMs - If you have neither, it creates /data/99SuperCharger.sh which you can load up on boot (run as root) with Script Manager. The OOM groupings work as well since it happens on boot in local.prop (20 entries added)
Note: For some reason, the minfree levels do not stick on some Custom ROMs. I don't know why this is. Maybe a bug in GingerBread?
........ If this happens to you, use Script Manager to load /system/etc/init.d/99SuperCharger "on boot" and "run as root"
In case of any error, you will find a related help file in the root of your SD card.
So... I think this covers ANY Android ROM
It also determines if you're using Script Manager and gives appropriate information/tips/help files depending on what other factors are present.
The above is really ALL YOU NEED TO KNOW.
The V6 SuperCharger script does everything!
Anything below is extra info!
It's just a single file... 806 lines (807 if you count the blank line at the end LOL)
So... What's it do?
It makes your phone FAST... super snappy with better multitasking!
If you read between the red lines below (parts 1-3), you'll see that at first it was only about minfrees and launcher redraw.
But after installing GingerBread, I saw that it needed more work than Froyo LOL.
Groupings were ALL MESSED UP and made NO SENSE to me whatsoever...
So I figured out how to group them more like CM6 (Froyo) but that still wasn't good enough...
I further rearranged the OOM Groupings and Priorites and lowmemorykiller values for a...
COMPLETE MEMORY MANAGEMENT FIX!
That's basically what this is
Faster than ever, no launcher redraws, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
Upon installation, V6 SuperCharger will first clean up any previous supercharging so none of your files get cluttered.
But if you toggle between Hard To Kill and BulletProof launchers, the memory adjustments aren't affected.
So you can leave your minfrees at stock/default settings and apply the Hard To Kill Launcher and still get the OOM Grouping/Priority fixes.
So if you love your ROMs memory settings, just try the HTK Launcher/OOM Fix... you won't regret it
Click to expand...
Click to collapse
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
vudiff said:
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
Click to expand...
Click to collapse
but it does work on the HTC Eris, which is on the Verizon network??
http://forum.xda-developers.com/showpost.php?p=11178955&postcount=2
vudiff said:
I don't think this will work with the fascinate "If you have /system/etc/rootfs/init.mapphone_umts.rc"... the fascinate is CDMA. This will only work with AT&T or T-mobile as they are UMTS
Click to expand...
Click to collapse
and if you have an init.d folder and if not it uses data folder.
It won't work on ipods tho
Izeltokatl said:
but it does work on the HTC Eris, which is on the Verizon network??
http://forum.xda-developers.com/showpost.php?p=11178955&postcount=2
Click to expand...
Click to collapse
Yes it is on verizon's network. I'm guessing that file isn't doing anything on CDMA phones.
I'm not a dev but I do know my networks. I work for Alcatel-Lucent in which we translate & make the cell cabinet,towers, & customer networks communicate. We are the people that brought you verizons 3g & LTE technology. Currently working on AT&T's UMTS & LTE networks. Yes i am the inside inside man. We provide the Base Station and most routers and make them communicate for the providers... Sprint, verizon/alltel, nTelos, cricket, metroPCS, etc...
http://www.youtube.com/watch?v=7V74huEaaf4
Ya but can you read instructions?
And what's that got to do with oom groupings, priorities, minfrees home launcher and androids lowmemorykiller?
Sent from my Milestone Powered by my V6 SuperCharger
zeppelinrox said:
Ya but can you read instructions?
And what's that got to do with oom groupings, priorities, minfrees home launcher and androids lowmemorykiller?
Sent from my Milestone Powered by my V6 SuperCharger
Click to expand...
Click to collapse
Wow... chill out dude. I saw umts at the end of the file and simply was just saying that these phones are cdma. I already said I'm not a dev. Comments like yours make people not even want to comment. I'm not new to roms, rooting, etc... I started out with the original droid, then D2 and I've had the fascinate ever since it came out. Rooted & started out with superclean when it became available. Geeze
Yes well in post 5 I pointed out that it also looks for the init.d folder and if not an alternative method by using the data folder.
Has nothing to do with networks.
It has to do with which file or method is used to implement the tweaks depending on what options are available.
zeppelinrox said:
Yes well in post 5 I pointed out that it also looks for the init.d folder and if not an alternative method by using the data folder.
Has nothing to do with networks.
It has to do with which file or method is used to implement the tweaks depending on what options are available.
Click to expand...
Click to collapse
OK got ya. I didn't mean to start an argument! Sorry that I misunderstood. I learned something new today... and thank you for breaking it down for me
Ah that's ok...
Btw... cool job lol
Sent from my Milestone Powered by my V6 SuperCharger
Yeah I tried this on a friends Fascinate and it dropped dead, wouldnt boot up.
Had to Odin up and restore back to stock.
I noticed my friends swype keyboard would lag even after restore back to stock.
thus the reason to try this script in the first place.The fasciante is decent lil bugger.
Its too bad I sing its praises on Evo thought, it really kicks butt.
im using this right now on my fascinate running miui 1.9.9 and its working flawlessly... three 3g tweak also works great. thanks zeppelinrox
It works with the fascinate, I use it constantly, and it doesn't need to be ported, the author stated it should work on nearly any device/ROM setup. Just get Script Manager app from the market, open app, go to settings, browse as root, then run the V6 script. It will give instructions as it runs.
Sent via Morse code.
Just ran the script last night, while it took me a while to fidget with it and figure out what option was best for me I can't believe that cm7 could be any smoother but there is a definite difference after running the script, with no lag, or home screen redraw, my phone is as smooth if not smoother at 1GHz.then it was at 1.5GHz before the script...just want to say it was painless easy and really made a huge difference...thanks a lot!
On a side note the battery calibration that was linked in the op does seem to work but I had to figure out when to pull the battery since the original instructions where on the milestone, either way great job and thanks again, I'll run this script after any rom I go to from here on out!
Sent from my SCH-I500 using XDA App
efan450 said:
Just ran the script last night, while it took me a while to fidget with it and figure out what option was best for me I can't believe that cm7 could be any smoother but there is a definite difference after running the script, with no lag, or home screen redraw, my phone is as smooth if not smoother at 1GHz.then it was at 1.5GHz before the script...just want to say it was painless easy and really made a huge difference...thanks a lot!
On a side note the battery calibration that was linked in the op does seem to work but I had to figure out when to pull the battery since the original instructions where on the milestone, either way great job and thanks again, I'll run this script after any rom I go to from here on out!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I ran it last night as well. I cannot really tell a difference. What setting are you running?
Option 8 and then option 12, set to browse root, and run as root in the first config screen...afterwords reboot and run option 1...it will tell you if your home screen was easy to kill or not and gives you a list of minfrees...I had to downgrade my busy box to 1.18.2.to get everything working
Edit: I used script manager to run the script and then put the widget on my home screen to easily access it...if you run option 1 and it says your home screen is bullet proof then it did work...I seem to get much better 3g connectivity and better download speeds.
Sent from my SCH-I500 using XDA App
Okay so I took the plunge and installed my first ROM (ICS Collective Base4) among other things with my SGH-I717M (Bell). Everything went very well and here are the issues that despite reading over 500 pages in threads related to these issues, I have not been able to solve them (workarounds, sure). I'm hoping that others can confirm these glitches and whether or not they have been able to remedy them:
-Upon boot, "Unfortunately, the process com.android.phone has stopped". Annoying, but doesn't seem to affect anything. No workaround or solution.
-Baseband "unknown". Tried ODIN flash install AND coming from completely stock phone via CWM flash, neither has remedied this problem. Doesn't seem to affect anything so don't really care.
-Stock calendar application missing - really don't like some of the other calendars, but I can't seem to find the APK file in any other ICS ROM's out there, so I gave up on this. So workaround, no solution.
-Time zone wrong. Workaround is to deselect automatic network management and select the correct timezone. Reverts back to incorrect upon rebooting so apparently only a workaround and no solution.
-Upon booting setCPU max/min speeds are incorrect and you have to open the application for it to correct the speeds. Perhaps it's just the widget that's broken, but for now it's a workaround and I can't seem to figure out a solution. Quandrant benchmarks seem to indicate that if I don't do this, the performance is affected as if the speeds are 1242max/384min and not 1512max/384min.
-Phone freezes on "Power Off", have to hold power button - camera flash goes off and then restarts. Workaround seems to be to use terminal emulator or other applications to reboot, etc. Don't know if there's a solution to this.
-Wallpaper incorrectly zooms - workaround: market applications. No solution that I can find yet.
-Unrelated to the ROM, but V6 Supercharger - I can only get it to report 50% supercharged, even after modifying my services.jar file and following all "step 8" instructions (that was an undertaking!!!). Don't know what's up there, but maybe some of you super-techs have figured it out.
-Only 624MB of RAM available instead of 700MB+ with GB. Haven't heard anything about why this is, so no solution or workaround.
-Doesn't seem to be an ICS keyboard available? I think this can just be installed from the market but I haven't tried it so not sure.
I'm sure there's other things like with Swype, tethering, etc.. etc... that are not working but this is just what I've noticed within the last 8 hours of flashing and trying to set-up and configure. Any comments or helpful suggestions for a n00b like me?
Thank you for any and all feedback. Thank you to all the developers working hard on this fresh release to bring us a solid ROM!
Calender: http://dl.dropbox.com/u/569065/Calendar.apk
Remember, this is a leaked firmware, these bugs are within that leak itself and a few of these issues have been addressed (unknown baseband, etc..) And will be fixed when we release the actual full ROM. this is just the base we shared in the mean time. A few are still present likesome settings not sticking through boot, and the power menu hanging.
Ithink is ur phone acting weird. Only the setcpu speeds not sticking and issue about wallpaper which can easily be fixed by using quicpics are the two issues my phone had. Just dnt use any cpu controller i noticed phone goes to sleep when no cpu controller while when there is cpu controller screen off speed sticks to 384 or 192
Sent from my SAMSUNG-SGH-I717 using xda premium
studacris said:
Remember, this is a leaked firmware, these bugs are within that leak itself and a few of these issues have been addressed (unknown baseband, etc..) And will be fixed when we release the actual full ROM. this is just the base we shared in the mean time. A few are still present likesome settings not sticking through boot, and the power menu hanging.
Click to expand...
Click to collapse
Absolutely. And considering what I've read about previously leaked versions of Android over the years, this one performs like a champ. Can't wait to see what comes out next, but I figured from what I've read this one works well enough to go the distance and install. Thanks again collective!
Felinos11 said:
Ithink is ur phone acting weird. Only the setcpu speeds not sticking and issue about wallpaper which can easily be fixed by using quicpics are the two issues my phone had. Just dnt use any cpu controller i noticed phone goes to sleep when no cpu controller while when there is cpu controller screen off speed sticks to 384 or 192
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yeah, just thought I would put my experience out there if it helps anyone or if someone could help me lol. It's very likely some of these are isolated problems, but most of them are problems with the leaked version. I uninstalled setCPU because I think you're right, something likes to nom nom the battery when the screen is off.
Oh and here's something odd which I don't know if anyone else has experienced with ICS or GB, but Terminal Emulator doesn't allow me to type anything unless I capitalize each individual letter. Which of course is useless because it can't accept commands in caps. When I press any key in lowercase it's like I haven't done anything. I had to switch to the pen mode where I scribe each letter and then it puts lowercase letters in for me. Anyone know what's up with this?
This is probably not the best Rom to run for your first flash. I would try one of the official releases in the development thread, unless you are an official tester for The Collective...
Can't wait till they release an official ROM ...
Sent from my SAMSUNG-SGH-I717 using Tapatalk
mk2 love i see im a vr lover Mr helios
Sent from my SAMSUNG-SGH-I717 using XDA
Helios909 said:
Oh and here's something odd which I don't know if anyone else has experienced with ICS or GB, but Terminal Emulator doesn't allow me to type anything unless I capitalize each individual letter. Which of course is useless because it can't accept commands in caps. When I press any key in lowercase it's like I haven't done anything. I had to switch to the pen mode where I scribe each letter and then it puts lowercase letters in for me. Anyone know what's up with this?
Click to expand...
Click to collapse
I had that issue in GB... In ICS it seems to be intermittent- sometimes it just works others it doesn't...
And regarding the baseband, not sure about the Collective rom, but DAGr8's ICS rom displays the modem correctly on my Bell Note.
I also had the timezone issue- strangely enough when I disabled network time and timezone, I also stopped get random slowdowns and ANRs.
Sent from my SAMSUNG-SGH-I717 using XDA
We've got the baseband unknown issue fixed in the full ROM. We just haven't released it. Still working on a couple things before we're comfortable sharing.
Hi, here are my thoughts;
1. Flash a CWM ICS modem(fixed it for me). If you cant find a modem use Dagr8's inital version of the ICS leak, it will successfully flash the modem(unlike the initial collective version(post 501 thread). The main point is to ensure you have the correct baseband(should not say unknown).
2. For now, dont supercharge the ICS leak until you have a stable running OS.
3. After fixing the baseband unknown issue(#1), reflash the collective post 501 ICS rom. It is stable, and the cleanup of the bloat was started already.
4. After installing #3, factory reset your phone.
At this point you should have a bloated, but error free ICS on your computer. Make a CWM backup, install titanium backup, and rip out the junk APK's(widgets, samsung/att garbage). Doing this will provide longer battery life and better performance.
No other wipe scripts are needed.
Factory reset BEFORE flash. The cwm script in the zip itself formats /system and /cache before it writes anything.
And the baseband unknown thing isn't a big deal. Its not that you don't have a modem at all, everything still works you get mobile data, its just the os doesn't properly report it.
if you like what you got, i say sit tight, we're working on the full ROM. You won't be disappointed
studacris said:
No other wipe scripts are needed.
Factory reset BEFORE flash. The cwm script in the zip itself formats /system and /cache before it writes anything.
And the baseband unknown thing isn't a big deal. Its not that you don't have a modem at all, everything still works you get mobile data, its just the os doesn't properly report it.
I say if you like what you got, i say sit tight, we're working on the full ROM. You won't be disappointed
Click to expand...
Click to collapse
Would be cool if you guys could make a minimalistic style rom without all the makeup and cosmetics and focused on performance
We think its cooler to do BOTH
Cause the guys at Samsung must have left their seeing eye dogs at home when it came time to theme
most of us don't usually do minimalistic... once a stable rom gets out you can expect a variety of themes. Sit tight.
studacris said:
We've got the baseband unknown issue fixed in the full ROM. We just haven't released it. Still working on a couple things before we're comfortable sharing.
Click to expand...
Click to collapse
THanks Cris, thats all im waiting for to make the jump to ICS-----is the collectives official - unofficial ics dev thread.
Studacris said:
"We think its cooler to do BOTH
Cause the guys at Samsung must have left their seeing eye dogs at home when it came time to theme"
LOVE IT!... and CAN'T WAIT! Thank you for all you do... and have a few beers on me. PayPal confirmation number: 6RE28092GB801952P
fishing.laguna.madre
NoteI717
Powered by The Unofficial
Thanked you in the ROM threads, but again, very appreciated. Thank you.
Sit tight. what we got cooking is gonna be tasty
Same experience here
well done guys excellent base.... Having the same experiences as helios909...
Really looking forward to the the fully packaged version. Not experiencing problems with cpu speed set on boot.
Face unlock not work properly yet. Device hangs on reboot as reported. Auto update time bug exists. Baseband version unknown. Phone crashes on initial boot. But recovers.
New voice type engine is amazing. As demonstrated here.
I have been experiencing a series of force closes. I am posting this to see if anyone else has experienced this, and whether anyone can suggest a fix. I'm pretty sure it was something I did, but I'm not sure what. I'm hoping that this can maybe narrow it down.
Device: SM-N900P
Firmware: OC5, stock, rooted, with several tweaks and modifications(detailed below).
The problem: I am getting several force closes. They only occur when I am trying to open certain settings. So, they aren't just popping up at random. They are slightly troubling, but not really problematic. Which is to say, aside from the actual force closes themselves, I don't really seem to be experiencing any major problems. Here are the FC's I am experiencing:
-Menu> Settings> General> Battery: This one results in a "Unfortunately, Settings has stopped" dialog box, and an immediate return to my home screen. So, I can't check out my battery usage. I'm not seeing any crazy battery drain. By opening Root Explorer and navigating to data> system> batterystats.bin, and deleting batterystats.bin, the problem is kind of fixed- I can open battery from the settings menu after that. But there is only battery level and state displayed, no usage information(just a message saying it is not available).
-Menu> Settings> General> Developer options> Process Stats: Results in the same dialog box, and the background turns black if I don't press "OK". I'm not even sure what this does, but after my Battery started force closing, I started checking the rest of the settings out.
-Menu> Settings> Connections> Data usage: Dialog box, immediate return to home screen.
The probable cause: hard to say, I've done a few things to it. Like I said, I was hoping that someone would be able to figure out what I've done from the following information about what I have done so far. So, here goes.
I was on NK4, running Priest Punch ROM. I reverted to stock and took the OTA about a week or so ago. I immediately rooted and installed TWRP using the method in this thread: http://forum.xda-developers.com/note-3-sprint/general/how-to-root-note-3-lollipop-t3089382 .
After rooting, I didn't see a whole lot of OC5 development, so I started poking around to see what kinds of mods I could use. First thing I wanted to do was remove bloat. I started off using Root Explorer, then I happened upon this thread featuring a bloatware removal tool for the T-Mobile variant: http://forum.xda-developers.com/note-3-tmobile/development/tool-utility-sgn3-sm-n900x-bloat-t2813036 . It worked. I removed a bunch of apps, but nothing I wasn't sure I could safely remove(I had to check Google a few times). I did not notice any problems at this time.
Then I installed this mod to pump sound out of both speakers: http://forum.xda-developers.com/note-3-sprint/development/mod-sm-n900p-surround-sound-t2966042 . I did not notice any problems at this time.
Next, I decided I wanted more fonts, so uninstalled the preloaded fonts and pushed the apk from this thread: http://forum.xda-developers.com/showthread.php?t=2752379 . Again, no problems.
I decided that a working hotspot would be nice, so I used the method in this thread to get one: http://forum.xda-developers.com/note-4-sprint/general/lollipop-hotspot-root-flashing-t3048163 . I tested it and it worked. No problems.
I really wanted to silence my shutter sound, and I happened upon this Galaxy S4 thread: http://forum.xda-developers.com/showthread.php?t=2261789 . It worked, and there were no issues. This was my first exposure to csc codes. I found a similar thread for the s6( http://forum.xda-developers.com/galaxy-s6-edge/general/quick-guide-enabling-hidden-features-t3087506 ), and followed the instructions. I was able to enable the camera during calls and enable call recording. No problems here. I tried a keyboard mod from the same thread, which had no effect at all(good or bad), so I reverted the code for that one back.
This is when I think I started to go off the rails a bit. I saw a thread for the Polish variant of the Note 3, N9005. http://forum.xda-developers.com/gal...camera-mod-note-3-n9005-lollipop-5-0-t3067827 -it had a neat sounding mod designed to improve camera quality, remove recording time and snapshot restrictions, and make 60fps HD the default camcorder mode. It took a little trial and error to get it installed, but I was making backups of files I was messing with, and was able to quickly and easily reverse any missteps. Again, the mod works fine, and I have noticed no issues. So, I started looking at the dev's other work. Which led me to this thread: http://forum.xda-developers.com/galaxy-note-3/themes-apps/secsettings-mod-17-swipe-charging-t3046032 . I wanted some different unlock effects, and I wasn't really finding them, so I tried his mod out. It was a 3 step process: replace a SecSettings app, copy paste some .ogg files, and finally, copy paste a SustemUI .apk. The first two steps went fine, but the third resulted in a persisitent, repetitive dialog box. I forget what this dialog box said, but it popped up almost as soon as I could press "OK", and I had to restore the backup of SystemUI to make it usable again. Oddly enough, about half of the new unlock animations still worked fine, and I wasn't seeing any problems after that, so I left everything else there. I liked the unlock animations, and they didn't seem to be causing any problems after I restored the original systemUi .apk.
Let's see, what else might be relevant? I was using the built-in task killer quite a bit. I'm also using SetCPU. I have 2 profiles: Screen on, 1728 MHz max, 300 MHz min, governor ondemand. And Screen off, 1036 MHz max, 300 MHz min, governor interactive. And I have installed the Material Power Menu from this thread: http://forum.xda-developers.com/android/apps-games/app-materialpowermenu-reveal-animations-t3059169 .
I started to notice the battery FC last bight. So, I wiped the battery stats as outlined above. Noticed it again today, wiped stats again, and kept checking it. After about an hour, it was force closing again. That's when I started poking around and found the others.
I dunno if anything can be done about this, or if anyone might know what's wrong. And, like I said, Aside from these FC's I'm not experiencing any real problems. I'm a little worried that they may get worse, or turn into something more serious, but I can always restore a backup if that happens. But if there is some kind of fix for these issues, I would use it. Thanks in advance to anyone who takes the time to read this wall of text, and tale of irresponsible phonery.
These are all settings that monitor usage.... should that tell me anything? I have tried wiping cache and dalvik, but that only seems to fix battery usage and data usage very temporarily(like, for a minute or less). And it doesn't seem to have effect on Process Stats.
My thoughts:
Seeing as you have flashed a lot of mods, it could be anything. If it were me, I'd start the rom from scratch. Then for the first step, instead of removing apps, I'd freeze them with titanium backup and give that a day or two to check the stability.
If that works, I'd continue with the mods one by one, giving a day or so for stability checks.
If you'd rather not do all that, you could use a logcat to find the origin of the problems.
Sent from my SM-N900P using XDA Free mobile app
jlechner said:
My thoughts:
Seeing as you have flashed a lot of mods, it could be anything. If it were me, I'd start the rom from scratch. Then for the first step, instead of removing apps, I'd freeze them with titanium backup and give that a day or two to check the stability.
If that works, I'd continue with the mods one by one, giving a day or so for stability checks.
If you'd rather not do all that, you could use a logcat to find the origin of the problems.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
I'd probably try the logcat first. One, because I hate doing stuff over, and two, Ive neber done it before and it should be a learning experience. Is it complicated? I'm assuming there is a thread here on xda about it...
GAPO said:
I'd probably try the logcat first. One, because I hate doing stuff over, and two, Ive neber done it before and it should be a learning experience. Is it complicated? I'm assuming there is a thread here on xda about it...
Click to expand...
Click to collapse
It's fairly straight forward. I did one to see why an app wasn't loading, didn't need instructions. But that was a fairly simple check, yours sounds more complicated. I'd do a bit of reading on it.
Sent from my SM-N900P using XDA Free mobile app
jlechner said:
It's fairly straight forward. I did one to see why an app wasn't loading, didn't need instructions. But that was a fairly simple check, yours sounds more complicated. I'd do a bit of reading on it.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Will do. Thanks for your help!
Okay well I decided to re flash OC5 and start from scratch.
I took it back to stock and re rooted. Am now debloating....no isssues yet.
I have flashed everything except the Polish camera mod and the wallpapers. Having zero issues of any kind. I know it can take difficulties some time to manifest themselves, but I'm betting it is either the lock screen animations or the camera mod. Leaning towards the lock screen animations because it involves messing with system.ui...
Okay, made a new backup and flashed the camera mod. No issues. After every mod, I have been going back and checking for issues. This is all stil pretty new, but if everything is still fine after a couple of days, well, I will be convinced that it was the lock rings. Not surprising obviously that flashing stuff meant for foreign variants can wreck your sh*t, lol.