Related
Hello everyone,i have changed my rom several times,everything was ok but as i run task29,and then when i lunched Miri & Dinik WM6.5.x 23569 v.17.4(2),my HD2 doesn't load and the blank screen that has the htc logo doesn't disappear.i have done every thing that it was said in this site(sd flash and so on,putting leoimg.nbh in the sd card and so on...) but it didn't work!!!
I wonder what should i do now?is it a hardware problem?
moharzani said:
Hello everyone,i have changed my rom several times,everything was ok but as i run task29,and then when i lunched Miri & Dinik WM6.5.x 23569 v.17.4(2),my HD2 doesn't load and the blank screen that has the htc logo doesn't disappear.i have done every thing that it was said in this site(sd flash and so on,putting leoimg.nbh in the sd card and so on...) but it didn't work!!!
I wonder what should i do now?is it a hardware problem?
Click to expand...
Click to collapse
can you manually get into bootloader?
yes,with soft reset and holding the vol down button.
and what does it say next to spl in bootloader?
sorry,it seems that the information that i gave,wasn't so complete to be answered,
it is SPL-1.42.000.
ok, so any spl that ends .0000 is stock so you dont have hspl installed, and so cannot flash custom roms or radios.
This no doubt happened when you tried to flash a stock rom from sd card, because even if the sd flash fails, it will have reset the spl. (Example, say you have an o2 locked phone, you try to flash a tmobile stock rom, from sd card, the first thing it does is remove hspl, and THEN it does the cid check, , finds that its a tmobile rom and an o2 phone so the flash fails, making you think it just failed, nothing more, but in reality it has already flashed the spl removing hspl)
Get hspl2
run it, choose the hspl version you want (1.42.hspl, 1.66.hspl, 2.08.hspl, it doesnt really matter)
pick any rom you want to flash and flash it from usb.
Let us know how you get on.
hey sam,that was great!you made my hd2 back to life.thanks a lot for your help my dear.
i tried many ways to fix it,but the rom update failed all the time.i tried to flash hd2 through micro sd,so i formatted my memory card and then i rename "ruu_signed.nbh" to "LEOIMG.nbh", and i reset hd2 while holding vol down button.then the loading screen appeared, i thought that i solved the prob but i was wrong and the loading screen was still there,i even waited for a hour!!!but nothing changed.the last option was to state my prob here,and i did,and i received a reply from you sam,i dont know how can i thank u,only i can say many thanks and you did me a very big favor!
my pleasure.
as for the favour,, do something nice for someone you don't know next time you get chance.
Hi all. Just wanted to let everyone know: NEVER GIVE UP. I task2a my htc leo twice (different times) and "BRICKED" it in that I could not flash any rom back to it. It has HSPL3 and trying everything including removing HSPL and going back to SSPL (HSPL 2.08.0000) I got nowhere. NO ship/stock or custom roms would flash at all by USB and when done by LEOIMG.NBH I'd get RADIO_V2 RSA FAIL etc. I tried using the various RUU executable: Romupdateutility.exe, CustomRUU.exe, ruu.exe (dexter series), and still had problems. I never lost HSPL or bootloader however... In the end I solved it like this:
1) CRITICAL YOU HAVE A FULL BATTERY FIRST AND FOREMOST ELSE IT DOESNT WORK OR UPDATE AT ALL. USE EXTERNAL CHARGER/OTER PHONE.
2) I connected by MTTY and re-did Task 2a, and a Task 28, Task 28 55 aa, and then a task 29.
3) I kept trying various different LEOIMG.NBH files including RADIOs, Custom roms with only OS.NB inside, etc etc etc.
4) In the END:
You will have to use your LEOIMG.NBH on <4gb SD CARD from the STOCK default rom the phone came with....
But: It will probably not (for some reason) work first TEN or so times !!! (weird?)
I kept trying doing ruu.exe in between each SD card attempt and also kept removing/swapping HSPL/2.08.0000 and going in and out of MTTY doing 2a, 28, and 29 OVER AND OVER AND OVER. Ultimately I know this is confusing (my explanation) but I am simpy saying my leo was gone and I did not give up so DO NOT GIVE UP. I sat there 12 hours+ doing this over and over and GOT IT BACK TWICE NOW (yes - I did 2a task twice for certain reasons)... USEFUL ROMS/APPS:
Task29.exe (containg single checksum-ok but BLANK - ruu_signed.nbh)
Telstra Stock ROM
Telstra (HTC website) signed update ROM.
Latest LEO radio
Dexter-with CHT2 and companion ruu.exe (used with dexter and other .nbh)
Xanny-Tech-Evolution via SD Card.
HSPL3_PKG.EXE
magldr 1.11 (by RUU and SD).
In the end YOU WILL FIX IT OK. I'm pretty tired now so I will go over this and clean it up later but KEEP PERSISTING AND HAVE FAITH: if you have HSPL and MTTY and SD you can and you will fix it.
---
edit:
OK, after stock telstra LEOIMG.NBH ok... wanted magldr back... did hspl3... fine... then did Task29.EXE(for radio rom 2.08 576 ram ok) by the EXE/RUU: DO NOT DO THIS... it fails and you have to start again:
after task29.exe (radio 2.08 not-MTTY) with FAILURE - I put the ruu_signd.nbh for this onto SD card and flash - fine. Then did MAGLDR.NBH the same (LEOIMG.NBH) and all OK. Then clockwork and update.zip for PPC-Windows7-Android.
----
Thanks DFT and Cotulla.
Hurry up and release NAND WP6 and WP7 NAND boot
Making donation $.
Cool that it works for you. But the steps in your description does not give me enough confidence that it will work for anyone else.
Or maybe someone else can verify this method?
Nice!
This was very inspiring! I hope it does work for everyone. As for me I did try for the nth time and well no luck for me, tried a lot of variations, roms, task29, radios but still unsuccessful. Guess for me customer service is the only way. Good luck to the others!
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
shah_vm said:
i have my friend device which is in similar situation tried everything but it dont wont work. dont know how to fix. my friend cant even go to tmo since he bought off ebay.
Click to expand...
Click to collapse
Just send it through tmo repair center, its gonna cost $120-$170
Hi guys, i'm stuck on:
PB81100 HX-BC
SPL-2.0.8.HSPL 8G XE
RIFFBOX 0x05
and white screen without htc logo, can i solve this? or it is bricked up?
Thanks in advance
the same here
I got out of bricked situation by extracting only the SPL file from the stock rom using OS builder.Renamed it leoimg.nbh and flashed it using SD card 2 GB /sandisk/.It appeared stuck on the "loading" screen and I had to remove the battery not sure if I'd succeeded.The first sign that something might have gone right was the green light showing fully charged battery,cause despite "common sense" I put the battery back in and put the phone to charge.After taht I used the RUU_signed file from the same stock rom I took the SPL from.
i must try harder...
i spend already to much hour on this pr ...i dont give up
i connect MTTY via USB button in win 7 i make this command task 2a , task 28 ,29
i want to find a STOCK ROM for my phone but i can't find a good one CID is HTC___001
i need a GOLD card i think... to unlock
after i make the info 8 cmd in MTTY window last line say OS not FOUND ...
Hy!
I did a stupid thing, with the following. I copyed an LEOIMG.nbh file to my formatted sd card, so I get an SPL-1.42.0000, but I can't flash any HSPL to my device, because the HSPL setup writes out USB connection error. Neighter can I flash for example the official 1.66 rom, the installation stops after 1%, and writes INVALID VENDER ID. What can I do?
Very siple but you need lots of time for it. The rom you flashe has spl 3.03 on it and so it doesn't allow you to flash any other spl on it. What you can do is you have to search for old stock roms in the native language of your phone. As long as the phone keeps giving you error when trying to flash a stockrom with you sd card, it means you have not yet gotten the right stockrom for you phone so you have to try with different old stockroms till you get the right one.
After that. you'll be able to flash whatever you like. Hope it helps.
But remember, you need time and patience.
Abdul9. said:
Very siple but you need lots of time for it. The rom you flashe has spl 3.03 on it and so it doesn't allow you to flash any other spl on it. What you can do is you have to search for old stock roms in the native language of your phone. As long as the phone keeps giving you error when trying to flash a stockrom with you sd card, it means you have not yet gotten the right stockrom for you phone so you have to try with different old stockroms till you get the right one.
After that. you'll be able to flash whatever you like. Hope it helps.
But remember, you need time and patience.
Click to expand...
Click to collapse
Thanks, I will try it. This stockrom is 1.66?
zoldya said:
Hy!
I did a stupid thing, with the following. I copyed an LEOIMG.nbh file to my formatted sd card, so I get an SPL-1.42.0000, but I can't flash any HSPL to my device, because the HSPL setup writes out USB connection error. Neighter can I flash for example the official 1.66 rom, the installation stops after 1%, and writes INVALID VENDER ID. What can I do?
Click to expand...
Click to collapse
You can also download HSPL 4 and use it to downgrade your SPL. To do this manualy put your HD2 into bootloader by holding the volume down button and pressing the power(end) butom momentarily. Once in bootloader connect your HD2 to your computer via USB cable wait until you see USB in the white bar of thd bootloader and run the HSPL 4 on your computer. It will ask you which SPL or HSPL you wish go flash select the proper SPL version to flash to your HD2 and you should be good to go. Hint the SPL version will have zeros at the end of them and the HSPL version will not. Example SPL 2.08.0000 HSPL 2.08. Hope this helps.
T-Macgnolia said:
You can also download HSPL 4 and use it to downgrade your SPL. To do this manualy put your HD2 into bootloader by holding the volume down button and pressing the power(end) butom momentarily. Once in bootloader connect your HD2 to your computer via USB cable wait until you see USB in the white bar of thd bootloader and run the HSPL 4 on your computer. It will ask you which SPL or HSPL you wish go flash select the proper SPL version to flash to your HD2 and you should be good to go. Hint the SPL version will have zeros at the end of them and the HSPL version will not. Example SPL 2.08.0000 HSPL 2.08. Hope this helps.
Click to expand...
Click to collapse
I have tried that, but after a few minutes - when it tries connect to the device - the HSPL setup writes out an error message;
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
but i don't know why, because during the installationvI see USB in the white bar of the bootloader - the device manager on the notebook shows the connection too. :S
Abdul9. said:
Very siple but you need lots of time for it. The rom you flashe has spl 3.03 on it and so it doesn't allow you to flash any other spl on it. What you can do is you have to search for old stock roms in the native language of your phone. As long as the phone keeps giving you error when trying to flash a stockrom with you sd card, it means you have not yet gotten the right stockrom for you phone so you have to try with different old stockroms till you get the right one.
After that. you'll be able to flash whatever you like. Hope it helps.
But remember, you need time and patience.
Click to expand...
Click to collapse
I just finished with the 1.66 OSPL roms http://http://forum.xda-developers.com/showthread.php?t=623283 but the problem was the same with each one. Should I try the 3.14 rom-s too?
zoldya said:
I just finished with the 1.66 OSPL roms http://http://forum.xda-developers.com/showthread.php?t=623283 but the problem was the same with each one. Should I try the 3.14 rom-s too?
Click to expand...
Click to collapse
Have you tried to restart your PC and or change another USB port of your PC?
zoldya said:
I have tried that, but after a few minutes - when it tries connect to the device - the HSPL setup writes out an error message;
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
but i don't know why, because during the installationvI see USB in the white bar of the bootloader - the device manager on the notebook shows the connection too. :S
Click to expand...
Click to collapse
Try the above post by silverwind and try another USB port, another computer, and another cable if you have too. Something just does not sound right about this. I am looking at this.
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
Click to expand...
Click to collapse
Just keep trying man I think you might just have a simple problem here.
Heck reset your notbook if you think it might help.
I have tried that too, and didn't solve the problem... :'(
Do you think that GoldCard method would help?
Hi. I have the same pronblem. I have a UK HD2 that was originally on Tmobile. I flashed 2.08HSPL using HSPL4 & upgraded the ROM to the standard WWE_3.14. A long story short... after playing around with SD Android & a few other utilities I wanted to make a clean start, so my plan was to use HSPL4 to remove the HSPL before then re-installing it & reflashing the ROM. Unfortunately I now seem to be stuck in SPL2.08.0000. HSPL4 just gives the same error:
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
I have also tried flashing a stock ROM via SD (renamed leoimg.nbh), but I can't get passed the bootloader displaying 'serial'.
Any ideas?
Chameleon846 said:
Hi. I have the same pronblem. I have a UK HD2 that was originally on Tmobile. I flashed 2.08HSPL using HSPL4 & upgraded the ROM to the standard WWE_3.14. A long story short... after playing around with SD Android & a few other utilities I wanted to make a clean start, so my plan was to use HSPL4 to remove the HSPL before then re-installing it & reflashing the ROM. Unfortunately I now seem to be stuck in SPL2.08.0000. HSPL4 just gives the same error:
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
I have also tried flashing a stock ROM via SD (renamed leoimg.nbh), but I can't get passed the bootloader displaying 'serial'.
Any ideas?
Click to expand...
Click to collapse
Did you place the leoimg.nbh on the root of your SD card? Also was tbe dile you renamed originaly named RUU_signed.nbh?
T-Macgnolia said:
Did you place the leoimg.nbh on the root of your SD card? Also was tbe dile you renamed originaly named RUU_signed.nbh?
Click to expand...
Click to collapse
Yes on both counts... I've even tried a complete 'long' reformat of the SD card first using the Panasonic SD Formatter, before putting the leoimg.nbh at the root.
I'm guessing that my stupid mistake is downgrading to SPL2.08.0000 whilst having a generic version of the 3.14 ROM installed. I guess I should have downgraded the ROM to an original Tmobile one first...
Could i ask what operating system you guys are using cos this problem could have less to do with the phone than it has to do with the operating system on the pc. I was trying to flash some roms on some old devices using Windows 7 but this didn't seem to work but it magically worked when i used Windows xp. I hope this works.
About the wrong Vendor problem, this just means the rom flashed is not recognized by the phone as the official one, i also had that problem and after flashing a official rom in the language of my phone, the problem was solved. I used the 1.66 rom so that i could flash hspl or else it might be impossible to do so.
Or as someone suggested you might try the hspl4 (never knew that existed) but try using Windows xp and if the problem persists try reinstalling your operating system (on your pc). I know it a lot of work but its just to rule out that the problem is from the pc.
Another thing i want to make sure of is if the phone is working normally with the rom on it or is there no rom at all?
Abdul9. said:
Could i ask what operating system you guys are using cos this problem could have less to do with the phone than it has to do with the operating system on the pc. I was trying to flash some roms on some old devices using Windows 7 but this didn't seem to work but it magically worked when i used Windows xp. I hope this works.
About the wrong Vendor problem, this just means the rom flashed is not recognized by the phone as the official one, i also had that problem and after flashing a official rom in the language of my phone, the problem was solved. I used the 1.66 rom so that i could flash hspl or else it might be impossible to do so.
Or as someone suggested you might try the hspl4 (never knew that existed) but try using Windows xp and if the problem persists try reinstalling your operating system (on your pc). I know it a lot of work but its just to rule out that the problem is from the pc.
Another thing i want to make sure of is if the phone is working normally with the rom on it or is there no rom at all?
Click to expand...
Click to collapse
Hi. Thanks for the input. The problem is getting even more frustrating! I've tried buying a new 4GB micro SD card (both are class 4). I have tried both TMO_UK_1.72 & TMO_UK_1.43. Both ROMs were downloaded from HTC using the correct phone's serial, so they should be the correct ones.
With the original SD card I can't get passed the bootloader screen & it just stays in 'serial' mode. With the new SD card it moves on to 'loading...', but then just hangs. I haven't yet seen the word 'searching' as described in the [TUT] Flash your ROM / Radio via microSD.
To clarify, the phone boots fine with the installed 3.14 ROM, but I can't get away from SPL 2.08.0000 or flash any other ROM.
Chameleon846 said:
Hi. Thanks for the input. The problem is getting even more frustrating! I've tried buying a new 4GB micro SD card (both are class 4). I have tried both TMO_UK_1.72 & TMO_UK_1.43. Both ROMs were downloaded from HTC using the correct phone's serial, so they should be the correct ones.
With the original SD card I can't get passed the bootloader screen & it just stays in 'serial' mode. With the new SD card it moves on to 'loading...', but then just hangs. I haven't yet seen the word 'searching' as described in the [TUT] Flash your ROM / Radio via microSD.
To clarify, the phone boots fine with the installed 3.14 ROM, but I can't get away from SPL 2.08.0000 or flash any other ROM.
Click to expand...
Click to collapse
Ok here is a couple of options for you. One go to www.t-mobile.com if you have a T-Mobile HD2 and type HTC HD2 upgrade in the search box on the home screen of the website and you will find the official T-Mobile 3.14 ROM. You will have to enter your IMEI number under your battery to download it. Download this ROM and then follow the steps to flash it via SD card, hint you will have to rename the original .exe file to .zip to gain access to the .nbh file. Also you can download and run HSPL 4 on your HD2 and select SPL 3.03.0000 but the official ROM will change it to SPL 3.10.0000 if you flash via SD card
Its a common problem i think if you are trying to flash a rom via sd card with a sd card higher than class two. Many here have encountered such problems.
According to your description, it will seem that it is as i suspected, the pc doesn't seem to recognize the phone and this could mean you have a defect usb cable or the useport itself is not funtioning properly. Try holding the phone in your hand with the usb in and support the usb with your hand to make sure the usb is indeed in the phone and see what happens. My usb cable is a little bit loose so when i want to flash anything, i use my hand to support it or i place my phone on a smoot surface and make sure the usb cable is in it.
zoldya said:
Hy!
I did a stupid thing, with the following. I copyed an LEOIMG.nbh file to my formatted sd card, so I get an SPL-1.42.0000, but I can't flash any HSPL to my device, because the HSPL setup writes out USB connection error. Neighter can I flash for example the official 1.66 rom, the installation stops after 1%, and writes INVALID VENDER ID. What can I do?
Click to expand...
Click to collapse
Chameleon846 said:
Hi. I have the same pronblem. I have a UK HD2 that was originally on Tmobile. I flashed 2.08HSPL using HSPL4 & upgraded the ROM to the standard WWE_3.14. A long story short... after playing around with SD Android & a few other utilities I wanted to make a clean start, so my plan was to use HSPL4 to remove the HSPL before then re-installing it & reflashing the ROM. Unfortunately I now seem to be stuck in SPL2.08.0000. HSPL4 just gives the same error:
CRITICAL ERROR
Flow:00000001
Error code: 00000002
Description: USB Connect failed!
I have also tried flashing a stock ROM via SD (renamed leoimg.nbh), but I can't get passed the bootloader displaying 'serial'.
Any ideas?
Click to expand...
Click to collapse
Ok do to some recent personal experience and some other members problem of late. I suggest both of you do this go to www.windowsmobile.com/getstarted and download the most recent version of WMDC wich has updated drivers in it that seems to solve somd problems with flashing via USB especially if you are using a 64 bit system. Just so both of you know unless your HD2 shows up as "HTC USB Sync" in the device manager while connected via USB while in bootlaoder you do not have the correct drivers installed and any flash will fail.
T-Macgnolia & Abdul9: Thanks for that, however mine is a UK Tmobile HD2 & the .com site is only for US ones (it doesn't recognise UK IMEI's). If I go via the UK site it just links me to the HTC update site for the RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship (& also the 1.72 & 1.43 versions. I have tried all of these via both SD card & via USB. I have also tried HSPL4, HSPL3 & HSPL2. All options have failed. I have tried from Win XP Pro & Win 7 Ultimate (both 32bit) with two different USB leads. I have also tried a 3rd SD card (which ends up stalling at the 'loading' screen. The phone flashed fine prior to removing 2.08HSPL with HSPL4.
I think that the problem is not the SD card or the USB lead, but is the problem that I've now got a Tmobile (UK) phone with spl 2.08 & a WWE_3.14 ROM installed - this should obviously not normally be possible. I can't flash back to HSPL & I can't downgrade to any other ROM.
Does anyone have any idea how I can 'fool' the phone into letting me change the ROM?
I've been reading about Task29, but it says don't do this unless you have HSPL (which I can't get!). I don't want to brick the phone (because it still runs!), but I want HSPL back otherwise I can't reinstall Android on SD.
Furthermore, I don't think this is a USB driver issue, as it flashed fine before & it's occurring across different PC's & operating systems.
It's an incompatibility between a branded Tmobile with SPL & a WWE HTC ROM... I just need to get out of the loop I'm stuck in!
Hey Chameleon I know you don't think it is a problem with the drivers cause it was flashing fine before. But what I do not think you have taken into account is that you came from a older ROM and you had the right drivers to work with that ROM or the update for that ROM. But you now have a 3.14 ROM and this is a newer ROM that probably requires different drivers. I mean Microsoft did not create a new WMDC with updated drivers if it was not needed for the 3.14 ROMs as they are the most recent official ROM versions. Microsoft is the one that comes out with the new ROM versions too, the carriers just add their bloatware to them. Do you see my train of thought here? Also make sure you are usinv SD card that is 500MBPS to 8GB that is formated with Fat 32.
T-Macgnolia said:
Hey Chameleon I know you don't think it is a problem with the drivers cause it was flashing fine before. But what I do not think you have taken into account is that you came from a older ROM and you had the right drivers to work with that ROM or the update for that ROM. But you now have a 3.14 ROM and this is a newer ROM that probably requires different drivers. I mean Microsoft did not create a new WMDC with updated drivers if it was not needed for the 3.14 ROMs as they are the most recent official ROM versions. Microsoft is the one that comes out with the new ROM versions too, the carriers just add their bloatware to them. Do you see my train of thought here? Also make sure you are usinv SD card that is 500MBPS to 8GB that is formated with Fat 32.
Click to expand...
Click to collapse
WOW! I've got the problem sorted! This can't be a coincidence... I haven't done anything different to my PC, but I got an 'unlock' code through for my phone this morning (£5.99 on Ebay) & it worked fine. I though "why not" & tried HSPL4 again. With no other changes it worked absolutely fine this time & I now have 2.08HSPL installed.
Presumably by unlocking my my phone from Tmobile it has also removed the 'you're using the incorrect ROM' problem.
Thanks for everyones input on this. I maintain that XDA-Developers is one of the best Forums around (not just within the mobile phone arena).
I've been going through threads for some hours now but haven't round a solution, so apologies if it already exists:
I've had a problem with my HD2 freezing. It's been sat in a drawer for a while but I thought I'd try and sort it out.
So first I did task29 and that seemed to go OK.
Next I tried to install the stock Vodafone ROM. It buzzed 7 times when the update started and then stuck at 9%.
Having failed to put a ROM on it I then followed the instructions to remove HSPL. When I start it (VOL down, LEOIMG.nbh on FAT32 formatted SD card inserted) it just goes to the tricolour screen and does not flash/load whatever the nbh file.
I put the phone in the fridge for a while and re-tried the ROM update and that reported success, but it won't boot so it's back in the fridge - I'm getting worried about the battery now.
I see someone else had the same problem removing HSPL but don't know what their solution was - am I missing something?
The phone is currently sat in the fridge because I think the 7 buzzes is a heat (processor) issue so assume it's knackered anyway but I still want to remove HSPL.
[thanks for moving the thread - apologies for putting it in the wrong place to start]
UPDATE: I've now successfully updated the ROM to standard UK Vodafone but still no joy with removing HSPL. I'm using a 2GB SD card FAT32 format file names LEOIMG.nbh but I just get the coloured screen. I'm using the nbh file from the current ROM. Tricolour screen reads:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
And then 'serial' or 'USB' at the bottom changing as I plug it in.
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Need a little help here, my mate got a HD2 off ebay, which was stuck at android loading screen. I have no idea what the original owner flashed or didnt flash. I can get into the tri-colour screen ok and it shows 3.03 spl, but refuses to change to usb from serial. How can I get access to flash something onto this that will boot?
samsamuel said:
Rather than using SD card stock flash, which contains a radio, (your symptoms are often the fault of the radio) you should try running hspl2, and setting spl 1.66.0000
I've also got personal expwrince of spl 2.x refusing to downgrade to 1.x, even when SD flashing, so radio problems aside i now remove spl/hspl 2.x using hspl2.exe and only then perform the SD flash.
Click to expand...
Click to collapse
I've not been on the forum for a while since I got the Sensation - can you point me to an hspl2 thread for the why's, wherefore's & how to's?
Thanks.
EDIT: Found it thanks.
To change the SPL you need the device in bootloader mode (tri-colour sreen) than you connect the usb cable between PC and device. in the white section of the bootloader should say USB (if usb sync drivers on the PC are ok). next you need HSPL2.exe, HSPL3.exe or HSPL4.exe from here - http://forum.xda-developers.com/showthread.php?t=611433 . depending on your current SPL/HSPL ver you'll choose one of them.
About the "It's working in the fridge" problem - sorry to hear that. It's pretty much fatal. Check out here - http://forum.xda-developers.com/showthread.php?t=982454
I just got back from repair an HD2 with the same problem, vibrating 7 times, ect., and it cannot be repaired. you need new main board but they are no longer produced, and even if you find one from china it's from 280-250 USD.
I hope it's not the same with you, but...
Well I did the HSPL2.exe thing and that was a piece of cake - HSPL now removed and ROM properly installed.
It still does the vibrate 7 times thing every now and again so it looks like it's going on ebay as junk
Ok, half bricked it while trying to update SPL to 2.05 with goldcard...
I understand that a half brick is when you hold both volume buttons down on boot and neither serial nor usb show up in the spl screen. Between this and my inability to flash the SPL 2.05 (gets stuck at "Loading..." and takes several minutes to even get past "Load USB Host". I've left it at "Loading..." for an hour, no progess...)... I'm stuck and need help.
When I hold the volume down button at boot and connect to Zune, I get this error: c101002e
I've read that this can be solved with the windows phone support tools... but MS's page also says not to use this on versions higher than 7.0.7something. Unfortunately I forced the update to 8107, so I don't want to find out what happens when you ignore the warning.
Basically everything is stock ATT except the forced update;
Radio:16.23.02.26_A_16.27.00.23U
SPL 1.10
Is there anything I can do to fix this? Please help
Update 1;
Tried to flash the SPL2.6 update from HTC using goldcard, no dice, gets stuck at "Loading..."
Tried to flash the Eternity cingular stock rom, once again, stuck at "Loading..."
I think I'm beginning to see a pattern; USB host works as far as reading the SD card, but beyond that it fails...
Update 2;
I wonder if I can reapply the firmware through cab sender? I would need firmware cabs for the htc titan, preferably ones that are compatible with the new hspl! I can't find any, been searching for hours...
Was the HSPL process successfully completed? Have you tried to put the phone back into USB com mode (camera + vol down + power) and putting the OSPL back on?
You're the first I've heard having this problem. Since you're using the Gold Card Method, I assume that your phone is a US AT&T Titan.
I hope you get it going.
---------- Post added at 04:13 PM ---------- Previous post was at 04:07 PM ----------
Not sure if you visited this page or not, but here are the instructions for flashing the HSPL. Further down the 1st post you'll find how to un-install it. I would try that since it doesn't sound as if your flash was successful.
Here is the link to the actual gold card method, if you haven't seen that as well.
No, didn't even get to HSPL. The instructions say to flash SPL 2.05 first, which isn't working. I'm stuck on the stock 1.10 SPL.
No matter what I try, any combination of flashing the original stock ROM, the HTC SPL update, etc, goldcard always gets stuck at "Loading..." so I think it's safe to say goldcard is broken as well, unless someone knows a foolproof fix.
Camera + Volume Down + Power... I assume you mean USB Host mode which is just Camera + Volume Down at bootup (holding the power button causes the phone to reboot). USB Host mode is how you use gold card, and like I said, it gets stuck at "Loading...". It does in fact read my SD cards because I saw the blinking LED that signals activity on one of the USB to microSD readers I tried.
Moreover there is nothing to uninstall since I am unable to install anything. I can use the WP7 cab sender, if I could just get the bootloader in cab form I think this would solve my problems; I think the stock SPL became corrupted somehow and needs to be reflashed... and I do not know anything about JTAG
When you made your Gold Card, did it say success or give you a problem?
Are you using a multi card reader or a single card reader for your gold card?
it says success.
I've tried two microSD cards, and three different card readers. I have gotten the CID for each card and properly applied the CID to each card, and properly formatted each in fat32 several times...
I've tried using the HD2 in Magldr usb mass storage mode, HD2 in android mass storage mode, HD2 in windows mobile mass storage mode... they all appear to work as it gets as far as "Loading..."
Moreover I have a single card reader and a multi card reader.. each making no difference; stuck at "Loading..."
I have tried a hundred different combinations which all appear to be successful if not for the fact that I'm pretty sure my SPL is corrupted.
Wow, that really sucks! Sorry I can't help. I haven't even done it myself yet. My y-cable will be here hopefully Friday.
The only other thing I would make sure of if I were in your situation is looking at the pics in gold card method post, I see that the gold card is to be placed in the female end at the bottom of the Y. You never said whether you made your own cables or not, but if you did, maybe make certain that it is correctly done.
Damn, while I'm sorry for your situation, I sure hope that I'm not right there with ya when I attempt it. Keep us up-to-date and good luck.
Yeah I bought a new Titan off ebay already XD
However before I open it I'm going to see if I can convince HTC that it was pre existing (it probably was) and that I found out while I was trying to do the official SPL update from HTC using the tool on HTC's site (which is more or less true as well XD). I think I'm still under warranty.
And I was using this Y cable http://www.amazon.com/gp/product/B000JIOHDE/ref=oh_details_o03_s00_i01
It works, I've tried it in various setups. It's actually really nice; the grey cable doesn't carry data so you can use your computer or laptop for power without worry. But I did in fact use a wall USB charger for goldcard, just in case.
But don't worry, I'm almost sure that this was pre existing; gold card/USB host mode behaved exactly the same from the start, the only thing that has changed is the fact that I can't get Serial / USB connections to show up in SPL anymore (nor can I hard reset from SPL). It worked correctly at least twice...
hey everyone, I fixed it.
USB host mode / gold card works; if you're stuck at "Loading" then your SD card is no good. I went around and tried every mass storage device in my house and found one that works, use the generic goldcard image from here http://forum.xda-developers.com/showthread.php?p=24809318#post24809318
To get rid of f400 error you need to flash cotulla's ROM, the cingular stock rom did not fix it.
Goldcard SPL up to 2.05, USB worked.
Install HSPL via USB, if that doesn't work, install the stock ROM via USB and start over.
Once HSPL'd at 2.05 USB will NOT work, so you'll need to goldcard cotulla's ROM (remember to rename it from FINAL.nbh to ETERIMG.nbh)
profit.
link68759 said:
hey everyone, I fixed it.
USB host mode / gold card works; if you're stuck at "Loading" then your SD card is no good. I went around and tried every mass storage device in my house and found one that works, use the generic goldcard image from here http://forum.xda-developers.com/showthread.php?p=24809318#post24809318
To get rid of f400 error you need to flash cotulla's ROM, the cingular stock rom did not fix it.
Goldcard SPL up to 2.05, USB worked.
Install HSPL via USB, if that doesn't work, install the stock ROM via USB and start over.
Once HSPL'd at 2.05 USB will NOT work, so you'll need to goldcard cotulla's ROM (remember to rename it from FINAL.nbh to ETERIMG.nbh)
profit.
Click to expand...
Click to collapse
Hi, I'm stuck with f400, running official eu rom with spl 2.5 . no HSPL , no downgrade , no nothing...
Which cotulla's rom are you reffering to?
Please help. (ATT HTC Titan)
spyros_tazz said:
Hi, I'm stuck with f400, running official eu rom with spl 2.5 . no HSPL , no downgrade , no nothing...
Which cotulla's rom are you reffering to?
Please help. (ATT HTC Titan)
Click to expand...
Click to collapse
It's been months since anybody has posted on this thread. There are two ROMs that set this process up. Depending on whether you have the x310a (American brand) or x310e (European). When this process is all said and done it reads x310e regardless where it came from. There is a Cingular 1.09 and an European 1.10...the key here is to downgrade the SPL from 2.05 to 1.09/1.10. Some Titans have lower SPLs depending where you're at. HTC's SPL update to 2.6 complicates this process. Think of as 3 major steps...one, downgrade to one of these ROMs, two, return to SPL205 via Goldcard and then apply DFT's HSPL. Step 2 took me forever to get right and the process is sneaky long...you think you failed but patience will be rewarded. There has been quite a lot of discussion in regards to "newer" Titan (Eternity) which the internal drive is set up in such a way that one is lead to believe it is corrupted or they've been setup like the Titan II (Radiant) which to date remains impossible to HSPL. You're better off using one of the older Titans (Eternity). A few of the links no longer get you the files you need and if they do I would encourage you to download everything that is there and read every tutorial carefully and then again; this isn't for the faint of heart. It's way, way harder than the HD2 or older HTC devices. Nor am I aware any device since the Eternities is HSPL capable other than maybe the Nokia Lumia 920 Developer Edition.
berrywr said:
It's been months since anybody has posted on this thread. There are two ROMs that set this process up. Depending on whether you have the x310a (American brand) or x310e (European). When this process is all said and done it reads x310e regardless where it came from. There is a Cingular 1.09 and an European 1.10...the key here is to downgrade the SPL from 2.05 to 1.09/1.10. Some Titans have lower SPLs depending where you're at. HTC's SPL update to 2.6 complicates this process. Think of as 3 major steps...one, downgrade to one of these ROMs, two, return to SPL205 via Goldcard and then apply DFT's HSPL. Step 2 took me forever to get right and the process is sneaky long...you think you failed but patience will be rewarded. There has been quite a lot of discussion in regards to "newer" Titan (Eternity) which the internal drive is set up in such a way that one is lead to believe it is corrupted or they've been setup like the Titan II (Radiant) which to date remains impossible to HSPL. You're better off using one of the older Titans (Eternity). A few of the links no longer get you the files you need and if they do I would encourage you to download everything that is there and read every tutorial carefully and then again; this isn't for the faint of heart. It's way, way harder than the HD2 or older HTC devices. Nor am I aware any device since the Eternities is HSPL capable other than maybe the Nokia Lumia 920 Developer Edition.
Click to expand...
Click to collapse
i managed to downgrade to official att rom,and got rid of f400 error, but the spl didn't downgrade...
I installed the rom 3 times with no luck with the spl...
Afterwards i renamed the eu rom from ETERNIMG to ETERDIAG and it installed.
but still the spl is :
PI39100 MFG
SPL-2.5.160015.3(137079)
eMMC SND 15188MB
TOUCH A1(F:81, ID:1,V11,B:F8)
Radio-16.23.02.09_A
I tried to install spl2.05 again (I don't remember but I think it failed), then spl2.6 with no luck, then hspl without results...
Finally I upgraded to 7.8 via cab installer and thats the best I managed to accomplish...
So I can't install any spl or hspl...
when I bought the device ,it had spl 1.09, not 2.6, so I think it's possible to hspl...