i installed the new update(fresh install) and root,xrecovery are working properly. then i installed app2sd(i have ext2 partition) i got installed but still apps are getiing installed in internal memory only. Titanium backup shows the sd ext2 partition but its not working. there is system/sd/apps folder but no apps in there. only few apps in appback folder which were installed before enabling app2sd.
does anybody have any solution?
Could this be the reason to why my phone now is nearly dead. I had app2sd installed before i made the update a couple of hours ago. I havent started up since then, it is in a loop with the first screen Sony Ericsson, then the color splash and then the logo together with the text Sony Ericsson... over and over. I have tried to soft reset, have tried to connect to SEUS but nothing seems to work.
Shader says...
dextrose said:
Could this be the reason to why my phone now is nearly dead. I had app2sd installed before i made the update a couple of hours ago. I havent started up since then, it is in a loop with the first screen Sony Ericsson, then the color splash and then the logo together with the text Sony Ericsson... over and over. I have tried to soft reset, have tried to connect to SEUS but nothing seems to work.
Click to expand...
Click to collapse
1.- Download FlashTool here
2.- Download ROM for Mini Pro here
2.5- Download ROM for Mini here
3.- Use this guide to flash your phone
4.- Consult Shader for any problems
- Shader
i am talking about 2.1.1.A.0.6 dude
^Shader^ said:
1.- Download FlashTool here
2.- Download ROM for Mini Pro here
2.5- Download ROM for Mini here
3.- Use this guide to flash your phone
4.- Consult Shader for any problems
- Shader
Click to expand...
Click to collapse
Thanks mate, i really hope (and think) this will work. I will try as soon as possible.
just use Link2SD bro It's much more elegant way than App2SD. It's available on Market too
http://forum.xda-developers.com/showthread.php?t=919326
dextrose said:
Thanks mate, i really hope (and think) this will work. I will try as soon as possible.
Click to expand...
Click to collapse
I have now made the flashing and everything seemed to turn out fine. Flashtool behaved just as in tutorial.
I unplug and power on and what happens?
Same loop as before the flashing... like this:
Start up with Sony Ericsson, then color splash and finally the logo screen, and then it goes on same way over and over...
BUT
15 minutes later i tried to flash once more, this time i did NOT add the dualtouch in the bundle and this time it worked out fine!! Now only the hard work to get the phone like it was before this happened...
Once again, thank you ^Shader^
abhi98228 said:
i installed the new update(fresh install) and root,xrecovery are working properly. then i installed app2sd(i have ext2 partition) i got installed but still apps are getiing installed in internal memory only. Titanium backup shows the sd ext2 partition but its not working. there is system/sd/apps folder but no apps in there. only few apps in appback folder which were installed before enabling app2sd.
does anybody have any solution?
Click to expand...
Click to collapse
hansip87 said:
just use Link2SD bro It's much more elegant way than App2SD. It's available on Market too
http://forum.xda-developers.com/showthread.php?t=919326
Click to expand...
Click to collapse
I couldn't agree more with hansip87.. it will mean you lose the apps that are already installed on your SD card but its a better over all solution..
Kiwi
dextrose said:
I have now made the flashing and everything seemed to turn out fine. Flashtool behaved just as in tutorial.
I unplug and power on and what happens?
Same loop as before the flashing... like this:
Start up with Sony Ericsson, then color splash and finally the logo screen, and then it goes on same way over and over...
Any more ideas?
Click to expand...
Click to collapse
My advice is to keep trying.. if SEUS aint working then Flashtool is your best chance.. it might take a few tries.. double check the .sin files are in the right place (Firmware file in flashtool) make sure you have the right firmware for your device and keep trying..
also.. if its a mini Pro then take the battery out for a few seconds.. if its a mini then press the power and center button at the same time for a reset.. try and try again!!
I guess keep trying is my main point.. you will get it eventually (then reformat your apps2SD partition and use Link2SD instead
Kiwi
edit....
(if your still having problems with flashtool after multiple attempts pm me and I can send you the original (non GUI) version of flashtool when I get home from work, perhaps it might work better) I have never had a problem with the old version, just copy the .sin files to the firmware folder open the flashtool app and follow the instructions (making sure you select wipe USER data when prompted)
kiwiBratwurst said:
My advice is to keep trying.. if SEUS aint working then Flashtool is your best chance.. it might take a few tries.. double check the .sin files are in the right place (Firmware file in flashtool) make sure you have the right firmware for your device and keep trying..
also.. if its a mini Pro then take the battery out for a few seconds.. if its a mini then press the power and center button at the same time for a reset.. try and try again!!
I guess keep trying is my main point.. you will get it eventually (then reformat your apps2SD partition and use Link2SD instead
Kiwi
edit....
(if your still having problems with flashtool after multiple attempts pm me and I can send you the original (non GUI) version of flashtool when I get home from work, perhaps it might work better) I have never had a problem with the old version, just copy the .sin files to the firmware folder open the flashtool app and follow the instructions (making sure you select wipe USER data when prompted)
Click to expand...
Click to collapse
Thank you Kiwi, i guess you didn't notice i updated my post at 10.20am today, I made one more try and it was total success !!!
Link2SD is working
please upload 2.1.1.A.0.6 build.prop
thnx
dextrose said:
BUT
15 minutes later i tried to flash once more, this time i did NOT add the dualtouch in the bundle and this time it worked out fine!! Now only the hard work to get the phone like it was before this happened...
Once again, thank you ^Shader^
Click to expand...
Click to collapse
No problem , btw you can just say Shader; the only reason I chose ^Shader^ was because Shader was already in use!
- Shader
dextrose said:
Thank you Kiwi, i guess you didn't notice i updated my post at 10.20am today, I made one more try and it was total success !!!
Click to expand...
Click to collapse
opps.. no I didn't notice because I was typing my answer as you edited it
you tried to add dual touch?? looking at the instructions in the link you followed I am not surprised you got a bit confused.. that tutorial was only for big X10.. which is why it mentioned Dual touch.. if I had knowen I would have just pointed you to easier mini instructions.
Glad you got it sorted in the end
Kiwi
kiwiBratwurst said:
opps.. no I didn't notice because I was typing my answer as you edited it
you tried to add dual touch?? looking at the instructions in the link you followed I am not surprised you got a bit confused.. that tutorial was only for big X10.. which is why it mentioned Dual touch.. if I had knowen I would have just pointed you to easier mini instructions.
Glad you got it sorted in the end
Kiwi
Click to expand...
Click to collapse
Yes, i got very confused when it didn't work when i added dual touch, but no problems as i sorted it out and made a new try without it.
Now my mini works better than ever. But it took a lot of sweat before i got it back to the way i want it.
i have the updated my mini pro to the latest build and installed app2sd / dc2sd .. seems to work without any problem.
Is this update newer than 2.0.2.A.0.24 ?
And what's new in 2.1.1.A.0.6 update?
Any improvement?
@ donetus, Are you using the existing rooting method or some patching is required to do the rooting after the new update?
App2sd Whit Ext3 Works Fine on my X10 Mini whit .06 Compilation
Related
ok this is a tutorial for those people stuck on a login screen.
first-off im not a develloper (far from it)
all info here is made by others and i do not take credit for it!
credits are @ the bottom.
since this question keeps popping up all over the forum and i had a bricked se myself i used a whole bunch of "tutorials" wich all lead to nothing,
so the i started fiddling around since it was broken anyway.
let me first explain i would like to thank the community here for offering all these great tools wich allow us to modify and restore our se.
ok so when i started my phone was completly bricked.
@ 1 point i managed to install xrecovery and accidentally installed a x10 version of a update.zip file...
i managed to flash that update.zip of a x10 version to my x10 mini pro wich completly destroyed my system.
i had no chance to boot in xrecovery because i am a complete noop in installing any kind of script to a android phone.
(if i were pro i would not have bricked it to start of with )
i accidentally wiped xrecovery in one of my previous attempts to "fix" my se with the flashtool ...yes i forgot to run the good update.zip out of the firmwares folder and choose the wipeuserdata option wich removed my xrecovery that i had installed....
so everything that could go wrong went wrong...
since it didnt really matter what i did with my freshly created brick i started digging around on the forums and found this post:
http://forum.xda-developers.com/showthread.php?t=920746
wich is a great way to flash roms to a previous version.
so i downloaded the tool 0.26 was the version wich i used.
after i got the tool installed i downloaded a new "old" rom.
i had too fool the se companion tool that i was using a old version.
these roms are found here:
http://forum.xda-developers.com/showthread.php?t=826455
pick anyone because it does not matter at all (since im dutch i used the dutch version)
even though my system files were messed up to a point of no return the rom installed just fine but did not boot... but now i had atleast a older rom installed.
so i started the se companion and crossed my fingers...
and it updated! because the old rom was predated to their latest firmware they pushed out the update wich fixed the system files and gave me the latest firmware.
but now ofcourse i was on a stock rom not rooted or anything.
since i am such a noob at this i tried a new all in one script made by mikevhl
found here:
http://forum.xda-developers.com/showthread.php?p=10596265#post10596265
it automaticly rooted my phone,installed busybox and xrecovery
after that i just ran the keyboard layout fix found here:
http://forum.xda-developers.com/showthread.php?t=822050
but now i needed apps2sd because that was the only reason i ever started this madness called upgrading....
but instead i found this:
http://forum.xda-developers.com/showthread.php?t=919326
it is not apps2sd!! but links2sd
Instead of moving all applications to SD card with app2sd, I want to move only selected applications.
Because I don't want to move my launcher, soft keyboard and dialer application to SD and make them unavaliable on boot if my SD card has problem or not inserted.
and because this is a apk even a geek like me can install that with astro..
please note that Link2SD does not move data and dalvik-cache, it only moves the apk file. This is what Android 2.2+ does. APKs are actually on the card; the dex files, private data directories, and native shared libraries remain in internal storage.
for actual apps2sd i would reffer you to use any other script/installation w/e. after all my failures i could not be asked anymore and found that this sollution was more than enough for me
the only thing you need to do is partition your sd card wich is verry easy and there is a perfect tutorial allready found here:
http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
so now i changed my bricked phone wich i considered dead to a working latest firmware rooted xrecovery links2sd working phone in less than a hour..
i would like to thank:
Androxyde and bin4ry for flashtool!
whooper90 for his keyboard-layout tutorial!
Mikevhl for his perfect script!
bakpinar for his links2sd program!
and ofcourse everyone contributing to their projects.
amen
a good post.thank you
nice post but i want you to point at an easier way
when you soft bricked your devices and i think i am one that have done that the most in this forum lol
have restores my soft bricked pro for more like 350 times now...
pull battery out open SEUS go further till you see you need to connect your phone
plug usb cable in it hold back button and put battery back in
and you rom will be flashed
this will always work coz we have s1 bootloader and thanks for that SE!
unless you go **** around with the boatloader ofc xD
i recently moved on to yet another mobile phone which i hope to be using for a couple of months since the se was not entirely to my liking but yes your method works fine ofcourse unless your bootloader is messed up
anyways i just expressed my way of fixing my problem on the situation i got myself into..which is probably verry simmilar to most nubs messing around on a android the first time and end up with a soft bricked phone... and to help them understand their bricked phone i wrote my little tut just for the nubs like myself.
what if i stuck at the SE logo?
my problem already solved now..thanx every1..xda roxx
I must admit, I am a complete noob when it comes both to linux, android and smartphones. I know a great deal about computers, but only recently bought the X10 mini pro, since it wasn't that expensive and I wanted a qwerty-keyboard.
Anyway, the reason I have decided to install a custom rom is mainly the fact that SE have confirmed that they will not give X10 mini/mini pro Froyo, so therefore I now understand I have to start using custom roms.
The current wishes I have for installing a custom 2.1 rom is the following:
-Apps2SD
-Multitouch
-Change themes
I have currently decided to go for the iridium rom. Is that a good decition? I've read lots about "JiT" but I don't exactly know what it is. For example, can I install JIT, then install a custom rom (such as iridium) and JIT will still be "installed" and working?
Many of the tutorials here are great, in the way that it makes noobs like me able to actually install custom roms, however, the tutorials are alot like:
STEP 1) Pick a ftl/i20x model and install with flash tool.
STEP 2) Use one of the following builds: 2.1.A.x353.3531.43 (I'm like... WTF IS FTL?! WHAT BUILD SHOULD I CHOOSE?? WHAT'S THE DIFFERENCE?!?!? :/) lol,
PerKiller said:
I must admit, I am a complete noob when it comes both to linux, android and smartphones. I know a great deal about computers, but only recently bought the X10 mini pro, since it wasn't that expensive and I wanted a qwerty-keyboard.
Anyway, the reason I have decided to install a custom rom is mainly the fact that SE have confirmed that they will not give X10 mini/mini pro Froyo, so therefore I now understand I have to start using custom roms.
The current wishes I have for installing a custom 2.1 rom is the following:
-Apps2SD
-Multitouch
-Change themes
I have currently decided to go for the iridium rom. Is that a good decition? I've read lots about "JiT" but I don't exactly know what it is. For example, can I install JIT, then install a custom rom (such as iridium) and JIT will still be "installed" and working?
Many of the tutorials here are great, in the way that it makes noobs like me able to actually install custom roms, however, the tutorials are alot like:
STEP 1) Pick a ftl/i20x model and install with flash tool.
STEP 2) Use one of the following builds: 2.1.A.x353.3531.43 (I'm like... WTF IS FTL?! WHAT BUILD SHOULD I CHOOSE?? WHAT'S THE DIFFERENCE?!?!? :/) lol,
Click to expand...
Click to collapse
Hi!
I personally really like the CyanogenMod (http://forum.xda-developers.com/showthread.php?t=961783). Take a look at it!
Features :
ADB
Display
Touchscreen
5 Random bootanimations
Light sensor
SD-Card
OpenGL / 3D
GSM
3G/EDGE
Video Playback
Sound
Vibration
Sensors
GPS
WiFi
FroYo Apps2SD
Keyboard layout
xRecovery
USB Mounting
LED Flash
Keyboard backlight (fast and dirty fix will improve later)
Audio mixer
Camera
Camcorder (works with this app not in stock camera app)
Headphone jack detection
Bugs:
Compass
Random reboots
FMRadio
(Multitouch i dont know so much about... sorry)
If u deside 2 install CM ROM, feel free 2 contact me! I've recently done it, and made i without very much problems! ;D
I'll C if I can help, but also much help in the posts from that thread (2bad it's now 40pages.. :S)
_____________________________________
Hope I helped, if so, press that Thanks button!! ;D
i would say try till you find one you like. just because you like the looks of the iridium rom you should try them all before you make your descion. also experiment a bit since that does not hurt to try.
Well whats holding me back is the simple fact I can't get xrecovery working. I made another post for that tho, anyone of you want to try and assisst me?
Sent from my U20i using XDA App
hey.
what sort of problem do you have?
installing xrecovery?
Seemingly all successful installs. But then I shut down mobile, turn it back on, start hammering the back-button but nothing happens
Sent from my U20i using XDA App
PerKiller said:
Seemingly all successful installs. But then I shut down mobile, turn it back on, start hammering the back-button but nothing happens
Sent from my U20i using XDA App
Click to expand...
Click to collapse
When R U starting to press back?
I start right after I feel the vibration (a little b4 the sony ericsson logo appears)
And remember that it is the first logo that they're talking about! The one woth only text! ;D
___________________________________
If I helped, click that thanks button!!! ;D
Trust me.. When I say I have tried for hours getting xrecovery to work, that includes rebooting 20-30 times, each time pressing the back-button from vibration and probably like 3 times per second, until phone is fully booted. No results. Is there no other way to check if xrecovery actually IS installed?
Ok, I've seen some problems with the placing of the three files...
Where have U placed dem?
You need to COPY them from sdcard til SYSTEM, Then MOVE to system/bin.
That step is very important to make it work.. if you've just copied them from sdcard til system/bin , that could be the problem.. ?
Sent from my Sony Ericsson Xperia X10 Mini Pro using XDA App
PerKiller said:
Well whats holding me back is the simple fact I can't get xrecovery working. I made another post for that tho, anyone of you want to try and assisst me?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
here you go
EDIT: Good Luck C:
I did nothing of the sort, i just used bin4rys 'all in one' tool from PC to install xrecovery, then also the xrecoveery-fix.apk i think also bin4rys production. It said it installs xrec
Sent from my U20i using XDA App
Thanks alot!
But now the strangest thing happened... after my phone crashed and I repaired it, I log into market with my google account, and all applications (such as "Root Explorer") that I've paid for in the past, won't get downloaded. It just starts download but nothing happens, download freezes at: "downloading".
Any ideas what's causing this?
JiT is enabled as part of installing Iridium ROM.
Alright, I did a factory reset to fix the problem. With market. Followed indtructions precisely, three times now...xrecovery never starts up.
Anything else I need to configure? I notice that when i reboot, go /system/bin the xrecovery.tar file is gone.
EDIT: No it is still there, with the same permissions.
It doesn't seem like anyone else have any issues running xrecovery, so I don't get it!!
Sent from my U20i using XDA App
When I try to install xrecovery with the aapk-installer, the three icons just turn red. Judging from others who had this happen, it was due to an outdated busybox version.
Anyway, I ran Titanium Backup to update busybox, but that only got me 1.15. How can i get 1.18? It is not on the market
Sent from my U20i using XDA App
PerKiller said:
When I try to install xrecovery with the aapk-installer, the three icons just turn red. Judging from others who had this happen, it was due to an outdated busybox version.
Anyway, I ran Titanium Backup to update busybox, but that only got me 1.15. How can i get 1.18? It is not on the market
Sent from my U20i using XDA App
Click to expand...
Click to collapse
I dont think it is due to busy box version. i have busy box 1.15.3, and i have x recovery and custom rom CM 6.3.2.1 installed.
Are you moving the file and then copying them to them to the system folder? and is the root explorer in rw.
Thread which i followed: http://forum.xda-developers.com/showthread.php?t=878426
peace.
I move files to /system/. Change permittion. Copy to /system/bin/. Reboot. Hammer back button, nothing.
The unified xrecovery-apk installer gives a clue I think, cause the install fails. I just wantt to find out why. I am rooted. I do mount r/w..
Sent from my U20i using XDA App
You need to copy them THEN move them, from your post above you are moving them then copying. Its important to do it the right way round.
Now I copied them to /system/. Change permittions. MOVE them to /system/bin/. Still no luck.
I am confused about all the talk about Busybox version, instructions about "DO NOT UPDATE BUSYBOX ONCE YOU'VE INSTALLED XRECOVERY!!" etc. but if I had done that wrong, xrecovery should just cause the phone to freeze at the SE-logo, right?
Atm, nothing at all happens at the SE-logo.
I think I'm going to use SEUS to wipe it all clean again, then just root it with superoneclick from PC, download Root Explorer, and try this again. My build atm is: 2.1.1.A.0.6 btw.
Thank you all so much for the help! I got it working now Had to go back to factory settings, then just root with superoneclick (NOT try to install xrecovery) then I installed xrecovery manually, after installing busybox through Titanium Backup.
Haha, now the only issue is that I can't find the flashtool from: http://forum.xda-developers.com/showthread.php?t=825664 I made afew posts here and there asking if someone could re-upload or post a mirror two days ago, but no replies. Does anyone have the GUI-version of flashtool?
EDIT: Nevermind. An angel uploaded a mirror of that too! =) Thanks everyone, now I will try my luck with the iridum rom!
I have a Sony Ericsson Xperia X10 Mini.
With a custom rom MiniCM7.
I have that rom for quite some time and liked it a lot.
Although today my apps that I installed are all gone.
Also the market place.
I tried to reinstall the market place but it doesnt appears.
When I look at my app list I see the app "com.android.vending" what is the market place if I am right.
Although I can't unstall it or open it (it also doesnt display the market icon).
How can I unstall or reinstall the market.
Please help, my phone is nothing without apps
Thanks for advance!
When I reboot my phone in recovery.
I can go to "backup and restore".
Then I click on "Advance Restore".
Then I press on the date when I installed my custom rom.
I have the following options:
Restore boot
Restore system
Restore data
Restore cache
Restore sd-ext
Will one of those restores help to solve this problem?
Thanks in advance.
hi
replace your market in the system>apps>vending.apk using the root explorer.
link for the new market with all instructions on how to make it work :
http://forum.xda-developers.com/showthread.php?t=1355150
if you find this usefull dont forget to click the thanks button
jan2426 said:
I have a Sony Ericsson Xperia X10 Mini.
Although today my apps that I installed are all gone.
Click to expand...
Click to collapse
Is it possible that you switched SD card? Maybe all the apps were moved there automatically by Cyanogen?
Thanks for response both!
sunil.s125 said:
hi
replace your market in the system>apps>vending.apk using the root explorer.
link for the new market with all instructions on how to make it work :
http://forum.xda-developers.com/showthread.php?t=1355150
if you find this usefull dont forget to click the thanks button
Click to expand...
Click to collapse
Well how will I be able to get root explorer without the market on my mobile?
I downloaded the market .apk file.
When I open it my phone is going to reboot (happens at the moment he tries to install it).
Also for the root explorer you need to pay, is there also some free one?
Or is it also able to do it from my PC (while my mobile is connected with USB)?
dindia2 said:
Is it possible that you switched SD card? Maybe all the apps were moved there automatically by Cyanogen?
Click to expand...
Click to collapse
I haven't switched from SD card since I using the custom rom.
When I look at the application list and search for "com.android.vending" i see it with a dark gray android icon (not the market icon).
Within that icon also at the bottom right a smaller icon with standing "SD" on.
The application takes 204kB.
With a Cache of 4.99Mb that I cant clear.
I already tried to put my SD card out and in again.
Although my SD card seems to work fine, I can find all my pictures, music, etc on it.
EDIT:
I seem to still have version: MiniCM7-2.1.1
While there is already a version: MiniCM7-2.1.4
Would it solve the problem if I update the version by using the recovery?
So also again a "wipe data/factory reset".
Then "apply update from sdcard".
And after that Flash gapps.
Will this maybe solve the poblem?
Alright I solved it.
I updated the kernel from nAa-3 to nAa-6.
I also updated the ROM from CM7-2.1.1 to CM7-2.1.4 into recovery (so also "wipe data/factory reset").
And then it all was solved.
I want to thank you two guys for your time, and yes I pressed the thanks button at both of u
Greetings,
Jan2426
I had exactly the same problem, apparently CM moved all my apps to SD with me asking. It does so automatically.. See my post here: http://forum.xda-developers.com/showthread.php?t=1361073
I just can find anything that will work for me, tried everything, but it appears that GingerDX 12 is the most stable and fastest for me.
With all due respect to the developers, sometimes it seems that with every new release about the same amount of bugs are introduced as fixed..
Glad you got eyerything running...
Anyways Here's the direct link for root explorer and its free :
http://www.apktop.com/wp-content/plugins/download-monitor/download.php?id=582
If you find this usefully don't forget to click the thanks
guys, i had CM7proV21 rom in my mini pro, but i had problems and i used seus to be back to SE original rom with android 2.1...
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!!
i tried to root the phone again and resintall V20 from the custom ROM, but i can´t get xRecovery to work...
don´t know what to do anymore... help
You should try to use CWM instead of xRec as it's widely used by any of these ROMs, and if I'm not wrong, MiniCMPro (as any other ROM would do) used CWM since V6/V7...
To fix these problems you can try to do a factory reset in CWM and clean dalvik or reinstall MiniCMPro, do a factory reset (in ROM and CWM, wipe everything (cache, dalvik) and then using SEUS to restore the original ROM, or maybe use pfonck's '2.1.1.Clean.0.0' ROM instead
Good luck!
azhhael said:
guys, i had CM7proV21 rom in my mini pro, but i had problems and i used seus to be back to SE original rom with android 2.1...
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!!
i tried to root the phone again and resintall V20 from the custom ROM, but i can´t get xRecovery to work...
don´t know what to do anymore... help
Click to expand...
Click to collapse
Hi, azhhael !!
1: I had almost same video problems on MiniCM7pro V21 (you said CM7proV21 ??) as yours before.
So I did reinstalled, then it problems to solved.
2: Did you read post of everything on the thread of [ROM]MiniCM7Pro - V21 + Lite Versions by Paul-xxx again ?
There are so many good hint for you. So you should to read [who given important hint] by your self, I think...
3: You said [resintall V20 from the custom ROM (?)], is that meaning [already to installed MiniCM7Pro V20]
You said [i can´t get xRecovery to work], but maybe you must have Cwm recovery v3.2.0.0 r4 or later.
If you don't have any [ClockWorkMod (CWM)], I think [link of following] is most easy way to enable CWM.
Try it !!
[RECOVERY] ClockWorkMod Installer - Windows v4 - Linux v4
Thx to Paul-xxx and rect2409
pls: I love custom rom of Paul-xxx too and I think a he is artist of genius.
So sometimes hard to enable. But when overcome the problems, can got another awesome world.
By the way....I'm very sad about he lost the his u20i...
Sorry about my very bad English.
-------------------------------------------------------
PHONE: X10 Mini Pro U20i
ROM: CyanoCream Sandwich V2.0 by Mr.Plancton.fr
KERNEL: ZonbiePanic V1.63 by Mr.slade87
Echo6502 said:
[RECOVERY] ClockWorkMod Installer - Windows v4 - Linux v4
Thx to Paul-xxx and rect2409
-------------------------------------------------------
PHONE: X10 Mini Pro U20i
ROM: CyanoCream Sandwich V2.0 by Mr.Plancton.fr
KERNEL: ZonbiePanic V1.63 by Mr.slade87
Click to expand...
Click to collapse
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
azhhael said:
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
Click to expand...
Click to collapse
OK i know ur worried abt ur phone... but dude.... this is the DEV forum!! ur question should be in the QnA Forum!!!!
having said that, i dont understand what u want...
do u want stock rom on ur phone??(if so use SEUS)
do u want video recording to work for longer time??(if so clear ur micro SD card as u said it's full)
do u want minicm pro to work correctly?? (if so then wipe data in CWM recovery and then install miniCMpro's latest zip)
He already used SEUS, but his camera isn't working. You got it wrong.
About your problem, try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Sorry for english, btw
Sent using Mini CM7 Pro by Paul
azhhael said:
THANK U SO MUCH! I have now the CWM installed.
I installed Pauls´v21 ROM version again, tryng to see if video is fixed... but no... i could not have it working, it freezes and force stopping the camera app.
And now, i call make calls! When i try to call anyphone number it cancels the calling before calling ring...
oh god...............don´t what to do anymore
Click to expand...
Click to collapse
You're welcome !!
However, you still can't problem solving and now + call problems detected...
Huuu... I can understand your feeling.
But please don't be give it up, you should be help your device !!
If I having fee time, I want try to reinstall MiniCM7Pro v21 on my device for the check but I don't have much time at now.
If you had only video recording problem, relatively easy to understand.
But now you had also phone call problems, maybe it is not MiniCM7Pro v21's problem I think..
So let's one more try:
SEUS (download & Install) again -> Flash SE latest firmware -> Root -> Install CWM -> Download & Install MiniCM7Pro v21 again
And Let's write on the note about what do you do at each steps every time for make recipe of Install custom roms
When you got good result, it recipe will can help another people in here !!
Felimenta97 said:
try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Click to expand...
Click to collapse
+1
Sorry about my bad English.
Felimenta97 said:
He already used SEUS, but his camera isn't working. You got it wrong.
About your problem, try reinstall SEUS and use it again (I haven't found the update files). Maybe the Android got corrupted in the download.
Sorry for english, btw
Sent using Mini CM7 Pro by Paul
Click to expand...
Click to collapse
1) er... camera seems fine according to what he says...
azhhael said:
........
everything is fine, but i can´t use the camera, it can´t record videos and the still images get errors with strange issues... so in video, it stops and can´t record. Almost on .21 or .40 seconds... and so, tels there is no space as my SDCARD is 16G!!!! .....
Click to expand...
Click to collapse
2) That's why, Preferably the original asker should clarify his questions
If SEUS downloads the entire rom, only then will it proceed to install it on your phone. otherwise installation wont even start.. seems like a problem with your SD card buddy...
SD CARD?
OH!!!!!!!! Can the Sd Card cause so much problems in the ROM installation? I though the ROM should be installed in the internal memory!!!! That´s really make sense... cause i got real problems after change my SDCARD from 4G to 16G one!
May i be back to 4G?
Mini Pro can´t support 16G CARD???
Yesterday i did:
1 - factory reset > wipe cache > wipe dalvik cache
2 - using CWM installed MiniCM7Pro v21
3 - though was strange as paul say in his page:
- Root (OK)
- CWM 4 (x)
- For CWM 3 Read Here (OK)
- Only 2.1.1.A.0.6 SE firmware (OK!)
- Baseband: M76XX-TSNCJOLYM-53404015 (OK!)
I followed all the instructions for user with CWM 3, so after the first ROM installation the CWm should be modified to 4, but it didn´t happened. May it has caused all the problems?????? (vídeo, callings didn´t complete, and NO APP could work!!! I installed but just got erros and erros forcing to close the apps)
How can i make sure CWM4 is installed???? Is there no manual installation for this version!?
4 - ok... ignoring the version of CWM V21 was installed and i got this erros:
- video freezes
- camera with artifacts in images causing serious deffects and making it unusable
- no calling completing
- error installing some app from market and when i could install no one of them could open, just got force closing erros making me uninstall the app (neither Titanium backup could work!)
- didn´t test more, cause i was so frustrated i gave up
5 - today i did all again
factory reset > wipe ALL again
used SEUS to reinstall (repair) the SE last ROM
- calling it´s ok
- didn´t test app installing from market yet (i´ll post here as soon as i do it)
- camera can take pictures, but video still freezes near 40 seconds recording
is all this cause of the SDCARD??????
OMG so... i´ll have to be back to my old 4G CARD?
BUAAAAAAAAAA
Hello again azhhael
Woooooow !!
Your report is really perfects
I can understanding the sequence of your events to easily.
But.......................Why can't you solved ?
Maybe SD card caused ?
If you can, try back to 4 gb and install MiniCM7pro again.
Then if without problem and work will be fine, give me a your 16 gb
However, can you see the inside of sdcard via MiniCM7pro ?
Because Video recording (40 second) data saving to where ? To phone memory ?
>> camera can take pictures, but video still freezes near 40 seconds recording
40 second use how many mega byte ?
Maybe sdcard cause call memory cause then meltdown...
I'm sorry today was don't sleep all night, so now I'm stupid already.
I go sleep now
After wake up I thinking again.
By the way if you tried something and got any result, please posting here !!
Hello Echo... hope u have rest time this night.
I'll report again what is happening now.
After all i told before in the last post, i came back to SE ROM and got this:
USING 16G SDCARD
- calling it's ok
- camera take pics but when i try to visualize it in the gallery i just get artifacts
- video freezes and the mobile STOPS! (i could see that files from camera r in SDCARD in the DCIM folder... as i think it should be...)
- app didn[t work sfter install and some others neither got installed
CHANGED TO THE OLD 4G SDCARD
- calling it's ok
- camera take pics
- video it's ok
- app are all ok
so... eliminating all i believe the problem is the card... is it right? Mini pro can't support 16G SDCARD? No way! I bought 4 of these ones!
I believe that if i install v21 now it will work fine, but before i try to install v21 again i[ll one more test, i will format another 16G card, i'll create ext2 and fat32 partitions (as my 4G is) so i'll try to use it instead of the 4G card. If it works fine, may be a card problem to access the data... at least that's what i think so now...
so, after find the answer for this question i'll be back to v21, hope it's fully working... hehehehe no issues...
tomorrow i'll test it all and so i'll post here, maybe as u tell me i can help another one with my problems described here
Hey. Don't go sleep yet. I have the same problems as you, but with diferrent card sizes. My 2 Gb Sd Card that came with the phone was too small for me, and I bought a 4 Gb (I don't need that much, but 2 Gb + helped).
I was using the Sd Card ultil I had the bad idea to fix my Mp3 tags (album art, in fact). When I have done that, I put my musics in my SD and music started to have some bugs (I can't describle it).
I could live with that. But all my photos started to corrupt and photos taken started to get cut (50 to 90 per cent was a grey, and the rest blur).
Came back to My 2 Gb Card, everything worked fine.
About 4 weeks later I, don't know why, had the idea to test again my 4 Gb Card. It worked fine. But I had forgot why the Card was corrupted, and had the brilliant idea to fix Mp3 Tags again. -.- My mistake. Card got corrupted again. Now I have all the problems I listed above, and .apk files have Problems Parsing the Package.
And I can't go back to 2 Gb card because I have lots os apps on SD and about 20 more musics.
(OMG, never wrote a text like this in this forum).
Sent using Mini CM7 Pro by Paul
azhhael said:
Hello Echo... hope u have rest time this night.
Click to expand...
Click to collapse
Thanks for your kindness azhhael !!
Btw, Oh.. you did good work again. I see, many hints in there.
+ Today I asked friend and he told me:
before he was install MiniCM7Pro v21 + 16Gb
At 1st time: He found cheep 16Gb microSDcard class 4 but no brands (china).
He got same problem as your's !!!!!
At 2nd time: He buy another 16Gb microSDcard class 6 of true Sandisk.
He solved problems and he still using U20i with MiniCM7pro v21
The meaning which it points out is MiniCM7pro v21 supported 16Gb.
But !!!! He forgot about how to installed. So I did kicked his ass !!
I will waiting for your new reports (I wishing good result)
Hi, Felimenta97 !!
Whaaaaaat ??? Oh my god, you have same problems as azhhael ?
So many guys having same problems with MiniCM7pro v21...
But you are lucky. azhhael trying a lot at now, so maybe will be solve soon !!
Paul Please comeback !!!!!
Please try pc companion.
Echo6502 said:
Thanks for your kindness azhhael !!
Btw, Oh.. you did good work again. I see, many hints in there.
+ Today I asked friend and he told me:
before he was install MiniCM7Pro v21 + 16Gb
At 1st time: He found cheep 16Gb microSDcard class 4 but no brands (china).
He got same problem as your's !!!!!
At 2nd time: He buy another 16Gb microSDcard class 6 of true Sandisk.
He solved problems and he still using U20i with MiniCM7pro v21
The meaning which it points out is MiniCM7pro v21 supported 16Gb.
But !!!! He forgot about how to installed. So I did kicked his ass !!
I will waiting for your new reports (I wishing good result)
Hi, Felimenta97 !!
Whaaaaaat ??? Oh my god, you have same problems as azhhael ?
So many guys having same problems with MiniCM7pro v21...
But you are lucky. azhhael trying a lot at now, so maybe will be solve soon !!
Paul Please comeback !!!!!
Click to expand...
Click to collapse
All my problems was with stock ROM. The problem with the music was that, let's say, music 1 is playing, and sudenly, some random point of music 2 starts playing for, like 2 to 3 seconds, and goes back to normal. It did happen 2 to 10 times, depending on the file.
Now, with Mini CM7 Pro the problem is lightly different. it don't play stretchs of the music, it just jumps to another music.
The problems with another types of files are the same.
When I got this problem, I was trying to install Gin.Tonic ROM, and the recovery was saying there was a problem with the package. I tought it was a recovery problem, used SEUS to reinstall Android. Root, xRecovery, CWM Recovery, the problem persisted. After 2 to 3 months later (about 3 weeks ago, I realized the problem was with the SD Card.
Now everything I install, apps, morphs, and Backups I use my 2 GB SD card.
And you are from Japan, that nice. I want to go there one day, but I have ZERO knowlege on Japanese. Want to go just because I played The World Ends with You, in my Nintendo DS, and loved the Shibuya district of Toquio.
Felimenta97 said:
All my problems was with stock ROM. The problem with the music was that, let's say, music 1 is playing, and sudenly, some random point of music 2 starts playing for, like 2 to 3 seconds, and goes back to normal. It did happen 2 to 10 times, depending on the file.
Now, with Mini CM7 Pro the problem is lightly different. it don't play stretchs of the music, it just jumps to another music.
The problems with another types of files are the same.
When I got this problem, I was trying to install Gin.Tonic ROM, and the recovery was saying there was a problem with the package. I tought it was a recovery problem, used SEUS to reinstall Android. Root, xRecovery, CWM Recovery, the problem persisted. After 2 to 3 months later (about 3 weeks ago, I realized the problem was with the SD Card.
Now everything I install, apps, morphs, and Backups I use my 2 GB SD card.
And you are from Japan, that nice. I want to go there one day, but I have ZERO knowlege on Japanese. Want to go just because I played The World Ends with You, in my Nintendo DS, and loved the Shibuya district of Toquio.
Click to expand...
Click to collapse
Thank you for your precious report Felimenta97
Did you tried CyanoCream Sandwich V2.0 yet ??
Because, now king (Paul) is not home, so develop in under a break.
But develop of CyanoCream Sandwich V2.0 is now still working, so need more tester in there .....But its only my feel
Pls:
Yea, I'm Japanese but I'm living in Hochiminh city of Vietnam and about 5 years I never go back to my country.
Hahaha... No one can control real own future like a god, so life is wonderful !! Don't you think so ?
I was born in Tokyo and kindergarten to elementary school was in Shibuya.
But there are so many people like ants and traffic congestion of car everyday !!
Thx Felimenta97 !! I'm happy to talk with you.
Btw, my friend living in São Paulo city and she is 3rd generation of Japanese. She is soooooo cute
I live in Ribeirão Preto, about 300 Km from São Paulo. I will go for Japan but in a long future (I am only 14 years old and my parent's money, compared to some of my classmates, and American and japaneses in general, is lower. My wishes are to go to Orlando (Universal Studios), then New York and then Shibuya. I am freaking out to see Hachiko (I wrote it right?)!!!
Yeah, it's nice to talk to you too. Have Facebook? Search for ''[email protected]''.
Back to the topic, I tested the version based on Mini CM7 Pro, the latest is based on Flame.E. I am already placed in this ROM, besides some bugs. I think it's because it's the semi official CM7, and accept a lot more tweaks and morphs and etc.
Sent using Mini CM7 Pro by Paul
If you not rooted your phone now, just report it to SE. If you rooted and unlocked bootloader, reflash using SEUS back to 2.1 and lock bootloader
We already solved the problem. It was with the SD Card..
Sent using Mini CM7 Pro by Paul
Felimenta97 said:
I live in Ribeirão Preto, about 300 Km from São Paulo. I will go for Japan but in a long future (I am only 14 years old and my parent's money, compared to some of my classmates, and American and japaneses in general, is lower. My wishes are to go to Orlando (Universal Studios), then New York and then Shibuya. I am freaking out to see Hachiko (I wrote it right?)!!!
Yeah, it's nice to talk to you too. Have Facebook? Search for ''[email protected]''.
Back to the topic, I tested the version based on Mini CM7 Pro, the latest is based on Flame.E. I am already placed in this ROM, besides some bugs. I think it's because it's the semi official CM7, and accept a lot more tweaks and morphs and etc.
Sent using Mini CM7 Pro by Paul
Click to expand...
Click to collapse
Thanks for your reply Felimenta97 !!
Wow.. You know the Hachiko- ??!! Very famous dog of sculpture in Shibuya
And you are 14 years old... It is enviable to me. Hahaha... now I can't telling my true age !!
I wish to you will be get future which you desire
>>Have Facebook? Search for ''[email protected]''.
No.. not yet. Because it can't connect from Vietnam until recently.
So I will make account later.
About topic:
Yeah.. almost you are right.
But, let's me now about what is accepted tweaks and morphs of it to concrete ?
I'm not testing you, I just only want to clarifies Them for me
Sorry about my English..
Hi Friends,
I recently rooted my x10i with the help of the xda-developers.com. Now my phone does not hang that much, thanks to everyone. The problem I created is, I removed all stock apps in my x10i such as the wisepilot, timescape etc., I also removed facebook app and all files related to facebook (thinking of installing it fresh from the market). But now after installing facebook from market, it doesn't work. It says katana.facebook something force closed. I also tried with other market apps for facebook, Please help regarding this....
And another problem is my bluetooth doesn't turn on, I am switching it on...it says turning on bluetooth, but never turns on....
Do help me...
srinivas103 said:
Hi Friends,
I recently rooted my x10i with the help of the xda-developers.com. Now my phone does not hang that much, thanks to everyone. The problem I created is, I removed all stock apps in my x10i such as the wisepilot, timescape etc., I also removed facebook app and all files related to facebook (thinking of installing it fresh from the market). But now after installing facebook from market, it doesn't work. It says katana.facebook something force closed. I also tried with other market apps for facebook, Please help regarding this....
And another problem is my bluetooth doesn't turn on, I am switching it on...it says turning on bluetooth, but never turns on....
Do help me...
Click to expand...
Click to collapse
Download official Facebook app.
Go to settings/applications/all apps/Bluetooth/ press "clear data"
It should be fine, if it didn't helped try blue FTP app from market.
Last solution is flashing stock frimware (as you said "deleted some apps", so factory reset won't work properly)
Sent from my BEAST, I mean X8
jay-z-s said:
Download official Facebook app.
Go to settings/applications/all apps/Bluetooth/ press "clear data"
It should be fine, if it didn't helped try blue FTP app from market.
Last solution is flashing stock frimware (as you said "deleted some apps", so factory reset won't work properly)
Sent from my BEAST, I mean X8
Click to expand...
Click to collapse
Facebook still not working, force closes.....
Hi, I cleared the data for bluetooth, still not turning on....also tried the blue FTP app from market.
Flashing stock firmware - are you telling that I should connect to sony pc companion and re-install / repair....
srinivas103 said:
Facebook still not working, force closes.....
Hi, I cleared the data for bluetooth, still not turning on....also tried the blue FTP app from market.
Flashing stock firmware - are you telling that I should connect to sony pc companion and re-install / repair....
Click to expand...
Click to collapse
Hmmm, so only can repair with pcc or flash 2,3 firmware with flash tools
Sent from my BEAST, I mean X8
jay-z-s said:
Hmmm, so only can repair with pcc or flash 2,3 firmware with flash tools
Sent from my BEAST, I mean X8
Click to expand...
Click to collapse
Hi, I think I made a blunder now....I flashed my phone with Sony Pc companion and both bluetooth and facebook started working. So, I started to root my phone as I did before, but while upgrading the kernel
My phone got stuck with the Sony Ericsson logo...Its not doing anything, now not able to flash with PC companion too...
Please help....
srinivas103 said:
Hi, I think I made a blunder now....I flashed my phone with Sony Pc companion and both bluetooth and facebook started working. So, I started to root my phone as I did before, but while upgrading the kernel
My phone got stuck with the Sony Ericsson logo...Its not doing anything, now not able to flash with PC companion too...
Please help....
Click to expand...
Click to collapse
Thank god, I sorted it out...You were of great help..Thank you very much.....
srinivas103 said:
Thank god, I sorted it out...You were of great help..Thank you very much.....
Click to expand...
Click to collapse
You are kidding or you can't really fix?
1-download flashtools (must have app)
2-download stock firmware .ftf
3-Place it at flashtools folder
C:/flashtools/"firmware "
(If firmware is in zip format rename it's extension to ftf)
4-run flashtools
5-click on lightning button then select flash mode
6-Press next button & follow instructions for flashing frimware
Sent From My BEAST , I mean X8
jay-z-s said:
You are kidding or you can't really fix?
1-download flashtools (must have app)
2-download stock firmware .ftf
3-Place it at flashtools folder
C:/flashtools/"firmware "
(If firmware is in zip format rename it's extension to ftf)
4-run flashtools
5-click on lightning button then select flash mode
6-Press next button & follow instructions for flashing frimware
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
Ya, I got it.....
Actually the problem was, in the procedure it said " hold your back button and insert the cable immediately after switching on the mobile" that is where i missed(forgot) it.... Now solved it.....
Now, facebook & bluetooth working fine.....
In the beginning (that is after flashing), mobile is fast and smooth....but after i finished installing all the apps I needed, it once again started to lag....
Is there any solution for this.....
srinivas103 said:
Ya, I got it.....
Actually the problem was, in the procedure it said " hold your back button and insert the cable immediately after switching on the mobile" that is where i missed(forgot) it.... Now solved it.....
Now, facebook & bluetooth working fine.....
In the beginning (that is after flashing), mobile is fast and smooth....but after i finished installing all the apps I needed, it once again started to lag....
Is there any solution for this.....
Click to expand...
Click to collapse
20% of apps automatically start again when you close them, so use a startup manager to stop them .
Erase ext partitions
Sent From My BEAST , I mean X8
jay-z-s said:
20% of apps automatically start again when you close them, so use a startup manager to stop them .
Erase ext partitions
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
I installed Startup Manager (full) and used them, Now my wifi is not working...It is scanning, then gets disconnected......
Erase ext partitions ???? <--- What is that, how to do it....
srinivas103 said:
I installed Startup Manager (full) and used them, Now my wifi is not working...It is scanning, then gets disconnected......
Click to expand...
Click to collapse
You must NOT disable all auto-start apps, just stop the ones you installed & not system apps (do not stop Facebook because it can't update when stopped )
Erase ext partitions ???? <--- What is that, how to do it....
Click to expand...
Click to collapse
Skip this step if you don't know that it is!(ext is used to use sdcard as internal memory for purposes like moving apps to SD, cache ,dalvik, etc..)
Sent From My BEAST , I mean X8
jay-z-s said:
You must NOT disable all auto-start apps, just stop the ones you installed & not system apps (do not stop Facebook because it can't update when stopped )
Skip this step if you don't know that it is!(ext is used to use sdcard as internal memory for purposes like moving apps to SD, cache ,dalvik, etc..)
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
Thanks man, can you tell me a Stable Rom,( or send a link for complete pack like kernel, Rom those stuffs) which does not have any issues or bugs.... mine is x10i with 2.3.3
srinivas103 said:
Thanks man, can you tell me a Stable Rom,( or send a link for complete pack like kernel, Rom those stuffs) which does not have any issues or bugs.... mine is x10i with 2.3.3
Click to expand...
Click to collapse
Sorry man , I'm not x10 user
But I heard some x10 users said miui rom is high performance(mixture of iOS & Android UI):beer::thumbup:
Sent From My BEAST , I mean X8
jay-z-s said:
Sorry man , I'm not x10 user
But I heard some x10 users said miui rom is high performance(mixture of iOS & Android UI):beer::thumbup:
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
Can you paste the link for this miui rom, I heard something as unlocked & locked Bootloaders...how to do that...
jay-z-s said:
Sorry man , I'm not x10 user
But I heard some x10 users said miui rom is high performance(mixture of iOS & Android UI):beer::thumbup:
Sent From My BEAST , I mean X8
Click to expand...
Click to collapse
Hi, I posted another thread asking for stable ROM for my x10, some said that DONUT HD is a good ROM, can you please help me in changing to this ROM(the basics)...
http://forum.xda-developers.com/showthread.php?t=1574185
Just install a cwm recovery.& place Donald HD in sdcard
Then boot to recovery, press backup & restore/backup then wait for recovery to finish with creating backup point
then go to main screen of recovery & press full wipe /factory reset (contacts , SMS , calendar entries ,save of apps & games will delete so create backups)
Then press install zip
Navigate to where you placed the rom & click to install
That's it , enjoy.
PS,do not remove backup in clock work mod folder of your SD, & copy it to your PC, just in case anything goes wrong you can easily switch to stock.
Sent From My BEAST , I mean X8
thanks man, ill try this.......