Hi all
PLEASE. DON`T USE JIT OPTION THIS WILL MAKE YOUR PHONE STUCK ON BOOT!!!Devs already working on this issueThks for kiwiBratwurs for calling this out
Since some guys having trouble using flashtools and how to abuse it , this is a "HOW TO FOR N00BIES".
Please visit the main thread for question
If you need/want upgrade your X10i baseband to the last one released by SE (X10a_2_1_A_0_435) and get 2.1.54, please go HERE (all credits to steve.adams.x10)
With this tool you can go SWITCH FROM/TO android 1.6 and 2.1. Just download the firmware rom links posted down and choose.
Please, if this thread was usefull for you in some way don`t donate me anything. Just ckick on THANKS, RATE THIS THREAD on top and vote on POLL . If you want to donate please do but on the right guys who made this incredible tool for us to use. Androxyde and Bin4ry.
I`ve only tested this on X10 even so this should work on every X family. If you`ve tryed on other X family and been successfull please send me a PM with that information and a link to firmware so that i can update this thread. Thanks
Very soon will be some improvements on this tool. Please stay tunned on the main thread (just to tease lol) Please don`t ask absolutly nothing about this. I just ignore.
INDEX
EASY WAY (*.ftf files)
HARD WAY (*.sin files)
How to root and more...
Apps that you can delete
Something was about to happen on next version LOL
----------------------------------------
----------------------------------------
WHAT YOU NEED:
Flashtool from HERE
----------------------------------------
----------------------------------------
CREDITS TO:
Androxyde
Bin4ry
Everyone from XDA
and myself of course for making this
----------------------------------------
----------------------------------------
Regards,
Ricardo Rendeiro
nice guide men! =) +10
I already know of at least 1 noobie that got a bit mixed up with these "X10" guides.. I was trying to work out what they were doing wrong trying to flash their mini then I went to the guide they were following (this one ^) and found out they were following it to the letter!! (which ment installing dual touch on a mini!!)
So its not really the best for "Noob's" unless they have a big X10 (not a mini or Pro) or at least something should be added to let them know not to install dual touch
I still don't see why .Sin files are refered to as the "Hard way" I still use the Flash tool I tested for Bin4ry last year when we all updated to 2.1 Nordic... no fancy GUI but simple as, and I have never had a problem flashing my phone.
Still.. nice work (I'm so old skool I didn't even realise there were ftf file's until I read this guide )
Kiwi
kiwiBratwurst said:
I already know of at least 1 noobie that got a bit mixed up with these "X10" guides.. I was trying to work out what they were doing wrong trying to flash their mini then I went to the guide they were following (this one ^) and found out they were following it to the letter!! (which ment installing dual touch on a mini!!)
So its not really the best for "Noob's" unless they have a big X10 (not a mini or Pro) or at least something should be added to let them know not to install dual touch
I still don't see why .Sin files are refered to as the "Hard way" I still use the Flash tool I tested for Bin4ry last year when we all updated to 2.1 Nordic... no fancy GUI but simple as, and I have never had a problem flashing my phone.
Still.. nice work (I'm so old skool I didn't even realise there were ftf file's until I read this guide )
Kiwi
Click to expand...
Click to collapse
Hi,
If you read well you don`t see any dualtouch on mini or mini pro. I can`t be blamed if people get so excited and don`t read can i?
I put that way (hard) because it`s harder. Well not harder but need more stpes to accomplish final result.
And last. From 026 version and next we`re only be able to flash through this type of files(ftf).
Hello =)
Thanks for your work! First, my english isn't very rich so dont blame me if i make some mistakes =S
So i tried to activate JIT after rooting my x10 mini using your flashtool. Everything was right until the reboot. It is said in other forum the reboot would take at least 5min but in my case, it took more than 1hour!!
So now i'm stuck on the SE logo for more than 2 hours (lol). Can anyone help me solving this problem please?
Thanks !
Reuberts said:
Hello =)
Thanks for your work! First, my english isn't very rich so dont blame me if i make some mistakes =S
So i tried to activate JIT after rooting my x10 mini using your flashtool. Everything was right until the reboot. It is said in other forum the reboot would take at least 5min but in my case, it took more than 1hour!!
So now i'm stuck on the SE logo for more than 2 hours (lol). Can anyone help me solving this problem please?
Thanks !
Click to expand...
Click to collapse
It`s not comon to happen but it may happen LOL
Flash again and repeat JIT procedure and see
Thanks for answering so fast! ^^
But i cant get my phone in flashmode, thus i cant flash it with a new rom ?
i hope my phone is not dead forerver lol =S
EDIT : Yes!! I have recovered my phone ^^ Made a research and found this thread : http://forum.xda-developers.com/showthread.php?t=924945
With the home+Back+power button trick, it is perfect!
Anyway, thanks for your tuto!!
Reuberts said:
Thanks for answering so fast! ^^
But i cant get my phone in flashmode, thus i cant flash it with a new rom ?
i hope my phone is not dead forerver lol =S
EDIT : Yes!! I have recovered my phone ^^ Made a research and found this thread : http://forum.xda-developers.com/showthread.php?t=924945
With the home+Back+power button trick, it is perfect!
Anyway, thanks for your tuto!!
Click to expand...
Click to collapse
GREAT
I´m not familiar with mini, so...
Reuberts said:
Hello =)
Thanks for your work! First, my english isn't very rich so dont blame me if i make some mistakes =S
So i tried to activate JIT after rooting my x10 mini using your flashtool. Everything was right until the reboot. It is said in other forum the reboot would take at least 5min but in my case, it took more than 1hour!!
So now i'm stuck on the SE logo for more than 2 hours (lol). Can anyone help me solving this problem please?
Thanks !
Click to expand...
Click to collapse
this is same thing happening to me too, i used flash tool earlier (2 hours earlier), now i rooted and optimized my mini, it rebooted and is stuck at SE Logo, i guess JIT is not correctly integrated in mini through this tool, am re flashing now...
ahub1988 said:
this is same thing happening to me too, i used flash tool earlier (2 hours earlier), now i rooted and optimized my mini, it rebooted and is stuck at SE Logo, i guess JIT is not correctly integrated in mini through this tool, am re flashing now...
Click to expand...
Click to collapse
i`ll check that with the DEV
thks for feedback
hi people !
i tryed flashing my x10 mini with this manual. but process is wery slowly. from 2 houwers i flashing only: kernel, amms, fota and dsp... This is only 40 Mb... The system files is 230 MB. My buttery can't working more then 4-5 howers when phone is flashing, how i can flashing qucly? May be i do something wrong?
Win 7 32bit, releases of fireweare and flashtool is latest from this site.
Hey dude, I think you might be trying to flash the X10 firmware on you mini... not a good idea... (as the X10 firmware is way bigger and won't fit on a mini, not that it would work even if it did fit )
I suggest downloading the right version for your phone.. a mini is an E10i/a and a pro is a U20i/a
and @Rendeiro.
Thanks for adding the warning to the top of the Noob guide should save us some headaches until the new version is out and working (then we can work on a mini instruction set.. seems a waste of time re writing it until the new version is released)
you da man!
Kiwi
kiwiBratwurst said:
Hey dude, I think you might be trying to flash the X10 firmware on you mini... not a good idea... (as the X10 firmware is way bigger and won't fit on a mini, not that it would work even if it did fit )
I suggest downloading the right version for your phone.. a mini is an E10i/a and a pro is a U20i/a
and @Rendeiro.
Thanks for adding the warning to the top of the Noob guide should save us some headaches until the new version is out and working (then we can work on a mini instruction set.. seems a waste of time re writing it until the new version is released)
you da man!
Kiwi
Click to expand...
Click to collapse
[MOD][rendeiro2005]Cyanogen6.1.1_v03
I''m having the following error when trying to start flashtool, any idea's?
java.lang.NullPointerException
at gui.FlasherGUI.initLogger(FlasherGUI.java:112)
at gui.FlasherGUI.main(FlasherGUI.java:140)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.exe4j.runtime.LauncherEngine.launch(Unknown Source)
at com.exe4j.runtime.WinLauncher.main(Unknown Source)
Click to expand...
Click to collapse
My only question is:
I want to flash a E10i (2.1.1.A.0.6) firmware on my E10a (2.0.A.0.504) firmware.
My phone is a Xperia X10 Mini (not a PRO). Can i use this FlashTool to do it? Will i get any trouble with it?
The flashtool is an universal x10 tool. It was build to work on every x10 family, so yes. Use at your will
mmota13 said:
My only question is:
I want to flash a E10i (2.1.1.A.0.6) firmware on my E10a (2.0.A.0.504) firmware.
My phone is a Xperia X10 Mini (not a PRO). Can i use this FlashTool to do it? Will i get any trouble with it?
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Hi... I have this problem, first my phone is an xperia x10 mini pro, ok i use the U20i NLU20i ITA - Thks to ginoscopesce for this one, but now my phone is carrier locked to Italy i guess. What can i do cause now is only a music player i cant use my SIM card. Thanks.
Flash Tool From GITHUB doesn't work
please delete
Related
Hi guys. We all saw that racht tried to port HTC 2.1 and 2.2 ROMs for our X8s. Unfortunately a lot of things don't work, so now I'm tryin to set properly working X8 2.1 drivers to that 2.1 HTC rom (or maybe 2.2).
Next I will make files that you could restore through xRecovery, so i need testers for that.
I'll help than I can=)
I can test it out for bugs too
You can count on me too
Sent from my X8 with bootloader removed
count me in
I can test , my x8 is not my main phone so I can cope if it goes wrong.
Ok guys, thanks for answers but now I'm tryin to start phone with modifiyed drivers. 'Clean' system works good, but if i change anything, or try to paste any library from original X8 rom i can't boot it again.
So i'm still working on it. xRecovery helps me a lot
i did next............copy all apk files and libraries from original SE firmware, to the HTC 2.2 firmware. but after phone starts, and trying to unlock it, it show a critical error in android.phone and rebooting. may be it help you. i don't have much time for experiments, but i've got a tester. so may be enjoy our works here? post what you paste in you version, and i can post here what i am insert.
hugerth
Thanx a lot,that you are tryin' to do something. Waiting for the release too.
I'm looking forward too, to get a fully working ROM.
i have a little suggestion
why dont we donate to cyangenmod team to creat a combartable with x8 room
sorry ,, v.bad english
"my native languege is arabic"
Good to see a development team for this, I am interesting in testing
Sent from my E15a using Tapatalk
For guys who want to unpack and repack system files I'll post tutorial tommorow. Maybe sb will have lucky day.
It was hard to find way to extract system.img (linux file system) on Windows, but i found it with X10's dev help and a lot of googling(i was 100% noob, now maybe 98% xD). Same with repack it again.
And i'm not a dev, just noob who don't want to wait for others, and try to make sth.
And what more - htc widgets aren't working in X8 orig ROM - i tried it so stop asking.
-X8 z Tapatalk-
hugerth said:
For guys who want to unpack and repack system files I'll post tutorial tommorow. Maybe sb will have lucky day.
It was hard to find way to extract system.img (linux file system) on Windows, but i found it with X10's dev help and a lot of googling(i was 100% noob, now maybe 98% xD). Same with repack it again.
-X8 z Tapatalk-
Click to expand...
Click to collapse
Did you try using htc rom kitchen?
All the download files and guide is in chef central topic.
No, i have two small files. But I'll try.
-X8 z Tapatalk-
Sory for double.
Ok I made one big mistake, I tried again.
[ROM] GINGERBREAD & FROYO "Remi-X10 mini pro" XL & XS, (New corners style)/ [deleted]
The Rom is no longer available.
Due to continuous requests for support and / or update requests to share some graphics depending on the needs that come to me that I can not fulfill for lack of time I feel obliged to delete that forum from Rom.
It does not seem right to leave here with the rom of my continuous questions intervention I can not answer because of personal commitments to which the Rom
been deleted.
This also does not seem to me a little courtesy to those questions that could not be answered.
I thank the entire community of xda.
English please......
BTW:
i think the rules says only english is allowed.. you should look the forum rules...
Touch Screen not working!
solution please...
vincenttan89 said:
Touch Screen not working!
solution please...
Click to expand...
Click to collapse
go to xrecovery and restore your backup...
btw, can someone please upload the file to multiupload i dont like rapidshare links...(im in a public wireless area :S )
i want to grab the launcher APK :b
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
royalbloodvi said:
So just to confirm, this is exactly the same as slades CM6 but better because quadrant scores are higher? Are these the latest sources?
Click to expand...
Click to collapse
i dunno... ive just downloaded it now... i will try and them i post my feedback here :b
it is not working.... briked my device...
Dont flash it will brick your device
PTGamer said:
Dont flash it will brick your device
Click to expand...
Click to collapse
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Can someone make a SE style (XPERIA Arc) with latest CM7 by Slade?
It will be awesome...
Thanks
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
Regarding the problem of the touch screen the only THOUGHT that I got for now is to first to load the rom to change system / lib / modules
1) File "x8gesture" update it to version 6
2) Delete file "cy8ctma300_ser"
While in etc, change the file "hw_config" and put the one you use normally.
Now zipped and run the installation steps.
I do not know if it works, and only a test.
antonio89drop said:
I try to answer all
As for the touch screen I need to know if the problem on all or Synaptics or Cypress?
I do not know if I can solve this problem is difficult because I work without a device to lean on as I have a "mini X10" however you are allowed to download and unpack the rom, try and change it to seek a solution to this problem.
Regarding the source codes are a mix of new and old.
Those scores are obtained in quadrant mode performance to min & max 729mhz 729mhz. quadrant in this condition varies from 1160 to 1360.
Click to expand...
Click to collapse
flashed the fw... got stuck on se logo... xrecovery not working... now ive got to go home and restore with seus..
you should try b4 post...
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
you don't have to flash the fix i already included it
I can not understand where the problem is.
I do not know whether or not charged as it was pointed out a problem with touch screen.
owain94 said:
someone please try this one
http://www.multiupload.com/6NFSXC9R89
i replaced a ****load of wrong stuff fixed the build.prop since it was wrong
added multitouch better hw_config.sh and that kind of ****
it should be working
but i can't test since my mimmi is broken
Click to expand...
Click to collapse
Owain94 Thank you for your assistance.
antonio89drop said:
Owain94 Thank you for your assistance.
Click to expand...
Click to collapse
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
owain94 said:
your welcome but i don't know if it works since i don't have an mimmi to test but i think it should be working perfectly
Click to expand...
Click to collapse
tested and is working now we just need to find if is there some bugs.
btw keyboard light al always on. i will tessting further
EDIT: bug cant see letters in timescape and cant login
working:camera and video, multitouch, market (but looks like i need to wipe dalvik beacuse i cant download), walkman, browser, wifi this is for now
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
slade87 said:
I'll help as soon as i can!
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
thank you sir
hmmm.... downloading now...
i will tell if find bugs to fix....
thx owain for ur assistan, btw I think u should update main page with the newer version, no all people read all replys...
Hey Guys
I didn't got the dualtouch of Slade (http://forum.xda-developers.com/showthread.php?t=1064558)
working on my mini pro (got all the requirements).
Weird is, that I got it working before I made a mistake with flashing a custom.zip,
that was not made for mini pro (really dumb, I know )
So I had to reflash with SEUS (bootloop) and got Slades CM7 with MiniCM7 for Mini Pro v14.5.
But when I now try to pich-zoom in Browser or any other app it doesn't do anything.
Would be really awesome if someone got a clue for me,
why it isn't working
If you got any questions related to my device, baseband etc. please ask
Greetings from Munich
Marius
Try to reinstall the dualtouch driver.
For me works (I had the same problem).
Which one did you take, because there are two:
One in zip for xrecovery and another with manual installation ?
Thanks
ImInMunichBitch said:
Which one did you take, because there are two:
One in zip for xrecovery and another with manual installation ?
Thanks
Click to expand...
Click to collapse
I did with manual installation
Don't forget the permissions...
Perfect
Thanks Bro
Hello everybody,
I'm sorry to bother you, but I look everywhere and I can't find an answer for my problem.
This morning I updraded my x10 mini pro to gingerdx v21b from gingerdx v17, and it worked very well except for the hard keyboard wich is qwerty and I need an azerty keyboard.
I first try the mini rom manager wich had worked fine for v17 but nothing changed.
Then I found a post in the development forum where I got a azerty.zip file to flash. But it doesn't do anything and I can't ask any question in that forum...
I don't know what to do now in order to have my keyboard in french...
Could anyone help me?
Thanks a lot.
After spending one all day searching everything I could find on the forum and testing everything, I finaly decided to go back to gingerdx v17 which I had backuped...
So I restored my old version with its hardkeyboard working in french and I copied all files in /system/usr/
Then I re-installed v21b and I moved the old /system/usr files in the new one...
It doesn't work... Still don't have a french hard keyboard...
Any idea ? anybody?
I really hope somebody will give me an idea because I'd like to keep this version, it's smooth and fast.
Thanks.
Hey did you checked this thread?
http://forum.xda-developers.com/showthread.php?t=1582023
I can't help you much really, I use MiniCM don't know how gingerdx works. But this site fixed some keys on my keyboard.
XepA said:
Hey did you checked this thread?
http://forum.xda-developers.com/showthread.php?t=1582023
I can't help you much really, I use MiniCM don't know how gingerdx works. But this site fixed some keys on my keyboard.
Click to expand...
Click to collapse
Yes, I found it an tried it, but it didn't change anything...
Thanks
When I upgraded to v17 I afterthat installed and run miniRom manager beta 3.0 which modified the keyboard.
But with v21b it doesn't change anything...
I'm actually on a zombipanic kernel with gingerdx, do you think I can swich to MiniCM ? Do I have to change kernel?
Yeah you need to change kernel, check my signature if you want MiniCM7 (GingerBread 2.3.7).
But if you want MiniCM9 (ICS 4.0.4) check this thread: http://forum.xda-developers.com/showthread.php?t=1636501
I have founded how to do it. Try this TUT (maded by me, please hit thanks button).
http://forum.xda-developers.com/showthread.php?t=1702433
thomas15v said:
I have founded how to do it. Try this TUT (maded by me, please hit thanks button).
http://forum.xda-developers.com/showthread.php?t=1702433
Click to expand...
Click to collapse
ok. thanks, I'll try it.
I tried to modify files this way, but I maybe forgot some of them...
I'll let you know as soon as I'll do it
XepA said:
Yeah you need to change kernel, check my signature if you want MiniCM7 (GingerBread 2.3.7).
But if you want MiniCM9 (ICS 4.0.4) check this thread: http://forum.xda-developers.com/showthread.php?t=1636501
Click to expand...
Click to collapse
I'll try thomas15v's suggestions and if it doesn't work I think I'll change kernel and Rom...
But I think I'll try miniCM7 I don't think I'm ready for miniCM9 !!! I don't use my phone too much, but it has to be fast and smooth and trusty ...
Thank you for you answer
thomas15v said:
I have founded how to do it. Try this TUT (maded by me, please hit thanks button).
http://forum.xda-developers.com/showthread.php?t=1702433
Click to expand...
Click to collapse
Thank you very much it works just fine
I think I had forgotten one file last time I tried to modify, because I had no troubell at all this time.
Thanks again.
cm9 is even better, try it. u will love it. :laugh:
also keyboard problem is never happened there...
Hello everybody,
My name is Leandro, I live in Argentina, so my english is not good enough I've a Sony Ericsson Xperia Mini ST15
Today I was experimenting with mi phone but I make a terrible mistake.
Let me tell us in order what happend:
- I had ParanoidAndroid 2.53 with some bugs tippical of a beta edition
http://forum.xda-developers.com/showthread.php?t=1963556
- I decided to back to ICS. I installed Cyanogen Mod 10 FPX 150
https://sites.google.com/site/projectfreexperia/download/cyanogen-mod-10
However I don't fell confortable without a sock camera
- I download and install (with all the wipes) XPERIA Ultimate HD
http://forum.xda-developers.com/showthread.php?t=1991371
It doesn't come with the "boot.img" so I download KernelPanic 1.25v (I put into my phone via Fastboot)
http://forum.xda-developers.com/showthread.php?t=1861905
HOWEVER I didn't notice when I installed the new rom, the device I'd selected wasn't mine (I make that terrible mistake)(I'd selected "LVW" or something like that)
- When I ran the new ROM, the touchscreen didn't work but all the buttons worked fine. :crying:
- I tryed to back to the Official ROM via Flashtool, but the touchscreen continued with this issue
- I reinstalled the XPERIA Ultimate HD choosing correctly but didn't work
I asked to some people, but they don't know about Sony devices.
If someone knows something to do I will apreciate too much.
Thanks in advance!
My Solution
xshanep19 said:
i had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed xperia active (st17i) firmware 4.0.2.a.0.42_ce.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.a.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
well no one asked ur personal info....
this is xperia development forum...
u have to post xperia mini Q&A forum.
dont post on Xperia Ray Android Development post on
http://forum.xda-developers.com/forumdisplay.php?f=2054
Moved thread to Q&A
well u might have selected the wrong device in aroma...thats y its not working.
sandy7 said:
well u might have selected the wrong device in aroma...thats y its not working.
Click to expand...
Click to collapse
Yes! that was my terrible mistake, but i don't know what i have to do to restore my phone except from wipes, installing the ROM again, other ROM or the official ROM
Can you help me ?
asdwier said:
Yes! that was my terrible mistake, but i don't know what i have to do to restore my phone except from wipes, installing the ROM again, other ROM or the official ROM
Can you help me ?
Click to expand...
Click to collapse
Have you tried flashing the whole firmware using flashtool?
zerorated24 said:
Have you tried flashing the whole firmware using flashtool?
Click to expand...
Click to collapse
Yes, as I said in the begining, the first thing I do when this issue appear is flashing the official gingerbread rom and also tried with the ice cream sandwitch rom.
asdwier said:
HOWEVER I didn't notice when I installed the new rom, the device I'd selected wasn't mine (I make that terrible mistake)(I'd selected "LVW" or something like that)
Click to expand...
Click to collapse
There you have it! If you know what you've done wrong the do it the right way! Re flash the Rom(and Kernel if you want) properly by choosing the right phone model this time!
gamer.11 said:
There you have it! If you know what you've done wrong the do it the right way! Re flash the Rom(and Kernel if you want) properly by choosing the right phone model this time!
Click to expand...
Click to collapse
obviously, I did that as I write in the begining, that's why I don't understand the problem, because I did all the wipes, put the same rom in the correct way, put another rom, the official rom, but, nothing happends, it's the same.
It's like I "change" an internal driver that the following instalations doesn't modify.
Did you format system partition before trying to reflash other roms?
Anyhow the touchscreen driver is in system/etc folder, the name is touch_nameofdevice.hex, if you push that file from a rom for your device and the hw_config.sh it should fix it
Rudjgaard said:
Did you format system partition before trying to reflash other roms?
Anyhow the touchscreen driver is in system/etc folder, the name is touch_nameofdevice.hex, if you push that file from a rom for your device and the hw_config.sh it should fix it
Click to expand...
Click to collapse
I format my phone via CWM y choose "format system", "format cache"
it's too strange for me, I think it's related with my bad choose that I write in the begining, but it must be a solution
I need my phone, I am an idiot
Can somebody help me ?
asdwier said:
Can somebody help me ?
Click to expand...
Click to collapse
Try this:
1. Download that
2. Open the zip and replace all files in the bin folder with files for your device (!), for example from a custom rom for xperia mini
3. After pushing files for your device in there, pack the content again (the meta-inf folder and the bin folder)
4. Copy this to sd card and flash it with cwm
5. This could work, but I can't promise anything
Hope you will get a working touch screen again!
mihahn said:
Try this:
1. Download that
2. Open the zip and replace all files in the bin folder with files for your device (!), for example from a custom rom for xperia mini
3. After pushing files for your device in there, pack the content again (the meta-inf folder and the bin folder)
4. Copy this to sd card and flash it with cwm
5. This could work, but I can't promise anything
Hope you will get a working touch screen again!
Click to expand...
Click to collapse
Thank you, in my rom doesn't exist the following files:
cy8ctma300_fwloader
cyttsp_fwloader
Where can I find them?
asdwier said:
Thank you, in my rom doesn't exist the following files:
cy8ctma300_fwloader
cyttsp_fwloader
Where can I find them?
Click to expand...
Click to collapse
Which rom? Try flashing this (link deleted now), but I can't promise anything, you choose to make this modification! I'm not responsible for anything!
mihahn said:
Which rom? Try flashing this, but I can't promise anything, you choose to make this modification! I'm not responsible for anything!
Click to expand...
Click to collapse
thank you very much but my touchscreen continues in that way
I apreciate your help and cooperation
asdwier said:
thank you very much but my touchscreen continues in that way
I apreciate your help and cooperation
Click to expand...
Click to collapse
There is someone in the thread I read a while ago that has the same phone with you and the same problem.
He just said he flashed xperia active using flashtool. Then flashed xperia mini afterwards.
here is the post
http://forum.xda-developers.com/showthread.php?t=2035151
thank him if it works
zerorated24 said:
there is someone in the thread i read a while ago that has the same phone with you and the same problem.
He just said he flashed xperia active using flashtool. Then flashed xperia mini afterwards.
Here is the post
http://forum.xda-developers.com/showthread.php?t=2035151
thank him if it works
Click to expand...
Click to collapse
woooooow mann!!! Thank you very much, you save my phone and my money!! =)
xshanep19 said:
i had same problem, i accidently installed something on my xperia mini which was for mini pro which caused touch screen to stop working, i flashed different stock firmware and so on, still the touch screen wouldnt work
i flashed xperia active (st17i) firmware 4.0.2.a.0.42_ce.ftf onto my xperia mini (st15i) in flashtool, then flashed stock mini firmware 4.0.2.a.0.62 afterwards
my touchscreen is working again
im not sure if this will work for anyone else, just thought id share what i did...
Click to expand...
Click to collapse
My Solution, Problem Solved , thanks to everyone who help me :laugh: