[Q] Updating Custom Recovery - Hero, G2 Touch Q&A, Help & Troubleshooting

Hi
I was wondering what the easiest method was to replace the custom recovery. I have an older Amon Ra recovery image and want to update it.
Do I just follow one of the methods to install it, in other words as if I didnt have it? or is there an easier way of doing it
Thanks

yeah, just flash it - for example using clockwork rom manager, or android commander, or adb ;]
cheers!
brat.haneq

Just a quick question
I need to follow these instructions
Copy recovery-RA-hero-v1.7.0.1.img to the root of your sdcard
Boot into your current custom recovery (boot while holding HOME)
Connect your Hero via usb to your pc/mac/...
adb shell
$su (not required if you have root already)
#mount -a
#flash_image recovery /sdcard/recovery-RA-hero-v1.7.0.1.img
just wondering, where do I type the code part?

You can type it in command prompt, simply in windows do "cmd" in run
But I urge You to use android commander, don't know why, but gui is better for me, and flashing is just 2 clicks
chers!
brat.haneq

Will give that a shot, cheers

Related

Under 2 minutes rooting and custom rom, radio flashing Guide

Hello,
Here i will give you a quick guide for HTC Hero to flash recovery image, root and flash custom rom and radio update.
1st download this package:
http://www.mediafire.com/?znq5hwjmldk
Or here
http://www.2shared.com/file/9305692/347b5ebf/sdk.html
Unzip it on c:\ so you have c:\sdk
In there you have 2 folders tools and usb driver for x86.
Connect your hero switch on to a usb and point to /sdk/usb drivers/x86 to install drivers
Download this rom:
http://content.modaco.net/hero/2.9-update-hero-modacocustomrom-core-signed.zip
And this Radio:
ftp://xda:[email protected]_6.35.08.22-signed.zip
copy them to sd card and rename rom image update.zip and radio to radio.zip
Now turn off hero and then press back+power to enter bootloader.
connect hero to usb port and let it install drivers or point to usb drivers/x86 folder again.
After done installing follow this commands to have root and recovery image to phone.
click start->run in open: write cmd
then cd\
cd sdk
cd tools
Copy paste this:
1. fastboot boot recovery.img
2. adb shell mount /sdcard
3. adb shell push recovery.img /sdcard/recovery.img
4. adb shell flash_image recovery /sdcard/recovery.img
5. adb shell mount /system
6. adb push su /system/bin/
7. adb shell chmod 4755 /system/bin/su
8. adb push Superuser.apk /system/app/
9. adb shell reboot
Let it reboot, then power off and press home+power and keep pressing home button until you see recovery image.
then you pick radio image radio.zip to flash, let it flash and will return to recovery then you can flash update.zip but before flash update.zip is recommended to wipe.
This is a collection of other tutorials so give credit to others not me.
thanks
The problem is that this works only on older versions of the Hero firmware. Newer versions are patched to not allow unsigned images to be fastbooted.
Soaa- you can use the GoldCard method to install an older ROM.
I know that. I did that.
But my point is this guide is outdated.
I think this guide is same as one Rooting HTC Hero ....success
Sorry to ask on many topics but I don't understand why we should "flash" the RADIO and SPL...What is "RADIO" and "SPL" ? What is the risk of flashing RADIO and SPL ?
Also why some ROMs need to flash RADIO and SPL ?
Thanks,
omokas
You need to worry about those things once decided to root or unroot.
HTC or your middle supplier will never ask you to do that. Because official Rom update will update everything.
I did updated with the latest European WWE update that updated my Build Number to 2.73.405.5.
Does this means that I can install MoDaCo 2.9 ROM (For Hero) without any risk of need to update Radio and SPL ?
I don't have warranty if I brick it Also yes I am rooted

How to flash_image Amon RA's recovery

i have had problems with Rom manager not flashing recovery correct leaving me with no recovery. so i had to manually flash recovery following these steps exact. I have personally bricked 2 ERIS phones lucky me.The first i thoought it was just something i did, lucky i had another to replace it...(the second BRICK eris).
So here is a solution to keep from having a BRICK
USE Amon RA's Recovery PERIOD.
credit to northmendo @droidforums
1. download flash_image Here Updated Link 3/17/10
2. Open the terminal and copy and paste the following commands.
adb shell [hit enter]
su [hit enter]
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system [hit enter]
3. In a new terminal window (don't close the original one).
adb push flash_image /system/bin [hit enter]
exit [hit enter]
4. Now in the original terminal window
chmod 755 /system/bin/flash_image [hit enter]
5. Now exit all termainl windows and reboot your phone.
6. Download
Amon_RA's recovery Here.
7. Mount your phones sd card and drop recovery-RA-eris-v1.6.2.img on to it and eject
your phone.
8. Open the Terminal and copy and paste the following commands with the phone connected
to your computer.
8. adb shell [hit enter]
9. su [hit enter]
10. flash_image recovery /sdcard/recovery-RA-eris-v1.6.2.img
11. To get into recovery turn off you phone and hold the Volume Up + Power until it boots into recovery.
That's it.
ROM Manager and Clockwork recovery does not work for the Eris.
ROM Manager and Clockwork recovery does not work for the Eris (as far as I know).
Edit: Oops, sorry for the double post.
I currently have the clockwork recovery installed on my eris, can I just download amon's recovery image and install it to switch to it? Or do I have to uninstall clockwork recovery and then install amon's?
trishuhh said:
I currently have the clockwork recovery installed on my eris, can I just download amon's recovery image and install it to switch to it? Or do I have to uninstall clockwork recovery and then install amon's?
Click to expand...
Click to collapse
try to flash it from rom manager,(under other recoveries) if Rom manager has worked for you with no problems. if it doesnt work follow instructions as listed in 1st post
I wouldn't use clockwork recovery, it messed up my installation to the point i couldn't flash any rom or restore any nand. When i would try to flash anything it would fail, It failed when i tried to use the root rom....After I tried flashing root rom i had a nice looking brick on my desk....(I even changed back to RA but Clockwork had messed up my phone so bad that RA didn't even work either....
YOU HAVE BEEN WARNED!!!!!
Yeah, use Amon's. It does every job you need, and is 100% stable and reliable.
t2noob said:
I wouldn't use clockwork recovery, it messed up my installation to the point i couldn't flash any rom or restore any nand. When i would try to flash anything it would fail, It failed when i tried to use the root rom....After I tried flashing root rom i had a nice looking brick on my desk....(I even changed back to RA but Clockwork had messed up my phone so bad that RA didn't even work either....
YOU HAVE BEEN WARNED!!!!!
Click to expand...
Click to collapse
yea you beat me too it, , i only used it because i had it for my DROID and thought maybe devs would try to add it to the list on rom manager.
ok, obviously a bit of an amateur here, how do you know which recovery image you have, i installed amon's, but i'm not sure if clockwork made it to my phone somehow, thinking about unrooting soon, that's why i ask, thanks.
jrhoades858 said:
ok, obviously a bit of an amateur here, how do you know which recovery image you have, i installed amon's, but i'm not sure if clockwork made it to my phone somehow, thinking about unrooting soon, that's why i ask, thanks.
Click to expand...
Click to collapse
reboot into recovery and read the bottom
Ok Please help a newbie out here im losing my mind. I downloaded flash, plugged phone into mac and set phone to debugging and mounted. Opened terminal from utilities on Mac. When I enter adb shell it says "command not found" if I try using ./ before adb as suggested on another forum for macs when i enter su it asks for password? Any how please help a brother out. Thanks
I flashed amons ras recovery from my phone it was easier for me I didn't use rom manger or terminal emulater
Sent from my FroyoEris using XDA App
Can someone help me get rid of clockwork recovery it showed up after I flashed a rom. How do you flash Amons recovery?
tkryan said:
Can someone help me get rid of clockwork recovery it showed up after I flashed a rom. How do you flash Amons recovery?
Click to expand...
Click to collapse
You do exactly what the first post says
Sent from my Eris
ufccowboyfan said:
Ok Please help a newbie out here im losing my mind. I downloaded flash, plugged phone into mac and set phone to debugging and mounted. Opened terminal from utilities on Mac. When I enter adb shell it says "command not found" if I try using ./ before adb as suggested on another forum for macs when i enter su it asks for password? Any how please help a brother out. Thanks
Click to expand...
Click to collapse
When you are doing this, are you in the correct directory? For example, my SDK is installed in /android , so first I would:
cd /android/tools
then
./adb shell
could someone help me with this. i really need to get the stock recovery image on my eris and im alittle noobie at this stuff. if any one could help id be sooooo happy
I'm not sure how to flash amons on a mac. I know for windows you put the recovery.img in the sdk tools folder, boot into fastboot and type
Fastboot flash recovery recovery.img
To get stock recovery (I assume you want your phone back to stock) then flash the official ruu. Will return your phone to 100% stock. You can find it on a sticky in the Eris general forums I believe.
Sent from my Eris using XDA App
I'm not sure on a mac, but on Windows you put the img in the tools folder of your sdk, boot into fastboot and type in adb:
Fastboot flash recovery recovery.img
To get stock recovery back, simply flash the official ruu found on a sticky in the Eris general forums I believe. Flashing the ruu will unroot your phone.
Sent from my Eris using XDA App
I installed Amon Ra as part of the root for leakers instructions some time ago. -- Is there a new version out? (Search was surprisingly not helpful) And what is the best way to update recovery?
Slugdoc said:
I installed Amon Ra as part of the root for leakers instructions some time ago. -- Is there a new version out? (Search was surprisingly not helpful) And what is the best way to update recovery?
Click to expand...
Click to collapse
There is no new version out; the first version (v1.6.2) is the only one that Amon_RA published.
IF there was a new version, you could flash it by using adb with the existing Amon_RA. You don't even need to push a version of "flash_image" to the phone, because it is already in /sbin in Amon_RA recovery. Just get the recovery image to your SD card, start an interactive shell (adb shell), and then
flash_image recovery /sdcard/<wherever-you-put-it>/recovery-RA-eris-v1.6.2.img
Yes, you can "flash a recovery partition by using the recovery" - because when you are interacting with it (the recovery boot), it lives entirely in a ramdisk.
The second easiest way is to have the engineering bootloader (1.49.2000 S-OFF) installed on your phone, and flash it with fastboot from the PC, as in
fastboot flash recovery recovery-RA-eris-v1.6.2.img
Note that neither of these two methods perform any integrity checks on the recovery image file that the normal "Flash .zip from sdcard" ROM installation method does. Therefore, it is imperative that someone using these methods is extremely diligent in cross-checking image MD5 signatures after it has been transferred to the SD card. Amon_RA also has the "md5sum" utility built into it's shell, BTW.
I mention this last point as a warning to newbs - they seem to routinely corrupt files when they transfer them to the SD card. (I suppose they are not using the "safely remove hardware" controls correctly, or they are getting truncated downloads).
bftb0

[flash mistake] I flashed my recovery with wrong image... (SOLVED)

Hello all!
I post this message to ask a little help as I made a very stupid mistake!
I already posted my issue in the Amon-RA recovery thread but I tried different solutions and nothing works :'''((( Help !!!!
I run a Modaco Custom Rom 3.0 and I had Amon RA recovery version 1.5.2.
I decided to upgrade to 1.6.2.
Well, you know... when it's the third time you install a recovery, you don't pay as much attention as you do the first time ... and I stupidily downloaded and installed the recovery of "Hero SPRINT"... and I owe a "Hero NOT SPRINT" of course.
Good new : my phone can load the ROM normally (hallelujah)
Bad new : of course, recovery menu can't be loaded anymore.
So, before I tried this method :
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader
fastboot boot recovery-RA-hero-v1.6.2.img
adb shell mount /sdcard
adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
adb shell reboot
But the second command fails (fastboot)... not allow.
Then, I tried the Flashrec solution (the one I used to root my phone the first time).
Backup of recovery or flashing recovery both fail with Flashrec.
Additional info : Formating the SDCARD via my phone doesn't work ... it's a Modaco bug, i'm not the only one in this case... so I can't format sdcard via my phone.
Seriously guys, I have a rooted custom ROM, there should be a way to get my recovery back :-(
Please please, don't ask me to try gold card... first step is formatting the sdcard via Hero... and I can't even do it.
Many many thanks for people trying to help me!
Don't take my post as being a solution because I'm a noob, but can't you flash the stock ROM off the Hero website and root it again?
Temet79 said:
Hello all!
I post this message to ask a little help as I made a very stupid mistake!
I already posted my issue in the Amon-RA recovery thread but I tried different solutions and nothing works :'''((( Help !!!!
I run a Modaco Custom Rom 3.0 and I had Amon RA recovery version 1.5.2.
I decided to upgrade to 1.6.2.
Well, you know... when it's the third time you install a recovery, you don't pay as much attention as you do the first time ... and I stupidily downloaded and installed the recovery of "Hero SPRINT"... and I owe a "Hero NOT SPRINT" of course.
Good new : my phone can load the ROM normally (hallelujah)
Bad new : of course, recovery menu can't be loaded anymore.
So, before I tried this method :
via fastboot + adb -> In case you don't have a custom recovery, so when you get signature fail errors
Code:
adb shell reboot bootloader
fastboot boot recovery-RA-hero-v1.6.2.img
adb shell mount /sdcard
adb push recovery-RA-hero-v1.6.2.img /sdcard/recovery-RA-hero-v1.6.2.img
adb shell flash_image recovery /sdcard/recovery-RA-hero-v1.6.2.img
adb shell reboot
But the second command fails (fastboot)... not allow.
Then, I tried the Flashrec solution (the one I used to root my phone the first time).
Backup of recovery or flashing recovery both fail with Flashrec.
Additional info : Formating the SDCARD via my phone doesn't work ... it's a Modaco bug, i'm not the only one in this case... so I can't format sdcard via my phone.
Seriously guys, I have a rooted custom ROM, there should be a way to get my recovery back :-(
Please please, don't ask me to try gold card... first step is formatting the sdcard via Hero... and I can't even do it.
Many many thanks for people trying to help me!
Click to expand...
Click to collapse
Hmm. Right. You're in a pickle here. Locked bootloader is a nuisance.
Put the SD card into the computer via memory card reader.
BACKUP CONTENTS BEFORE PROCEEDING. Now format card as FAT32 via computer card reader. Then follow the goldcard guide (there's a copy at http://www.villainrom.co.uk/viewtopic.php?f=46&t=375 or on the site here, but I dunno where it is as it's buried off front page I think)
So get your CID, do the usual stuff with making img, and put it onto card as usual. This should get you goldcard.
Then use card to downgrade to the old RUU, and root back from there
HTH
Ok guys, got it back this night, fully recovered at 3 AM!
Here's the story... with nearly all the possible issues you can encounter in the same case.
I first checked on which ROM Modaco 3.0 is based : 2.73.405.66 ... so that explains why I couldn't use Flashrec directly.
So, I started the Gold Card procedure.
As specified, I can't format via my Hero. Android beeing based on Linux, I decided to format a SD card via Linux (I'm a linux user ...), but I don't know if it changed something or not.
I could create the Gold Card.
Once I had my Gold Card, I downloaded Titanium Backup, made a donation and waited for my license to arrive.
I did a full backup.
Then, for downgrading, you need to use HTCsync. Good... oh, right, I removed it from my Modaco ROM!. So, unzip the Modaco ROM 3.0, get the PCSCII.apk and "adb push" it back on the "/system/app" folder.
Then, ok, launch HTCsync on the computer, and finally on the phone. Oh, my phone doesn't detect HTCsync on my PC!.
Aaaallllll riiiight !!! Uninstall my HTCsync, download last version, reinstall... and it worked!
Then, downgrade... and the Flashrec story went OK, so I got my recovery back. Once I have the recovery, my Hero is more or less saved. I upgraded back to the same Modaco 3.0 because I wanted to restore the whole Titanium Backup without versions issue. This did perfectly the trick! The only thing I had to reconfigure is my standby wallpaper!!!! Awesome tool !
My phone is happy, I am too... but hey, I woke up at 11:30 this ""morning""...
Maybe this will help another guy one day...

[Q] Unable to flash recovery(?)

I've used Universal Androot to root my HTC Hero (UK).
I then opened up Android Terminal Emulator, which asked for permission for SU as expected. When I put in the flash_image line, I get back:
usage: flash image partition file img
Which I'm guessing means it hasn't worked (esp since when I then try reboot recovery, it says not permitted).
I attempted
rm /data/local/rights/mid.txt
ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
which is recommended in the guide, but that didn't seem to make a difference.
I've also tried using ROM Manager to flash clockwork recovery, and with this is just shows the little spinning circle in the top right for a split second, and then nothing happens.
Really don't know what's going on :S
Could anyone help?
2 way's:
1. Try to flash recovery by ADB
2. Use ROM Manager

How to fix Android boot loop, ADB?

My android (jellybean) tablet was turned off in middle of update and now is in boot loop. It was rooted with USB debugging on.
I MUST recover files (PDFs, .doc, .wav .JPEG, etc ) without erasing them.
Questions:
1 Do I use Odin and TWRP together?
2 Will Odin flash Samsung stock firmware erase files on device?
3. Will TWRP .img file erase everything?
4. Are these instructions correct?
I recommend you install TWRP recovery. It's the most feature-rich of all the recoveries I have used, and I will be assuming that is the recovery you use for the rest of this.
1. Boot into TWRP. (how? TWRP is an .img file )
2. Push your ADB public key to your device to force authentication.
____On Windows, do: adb push %UserProfile%\.android\ad
bkey.pub /data/misc/adb/adb_keys
3. Reboot into Android. Try adb shell and see if you get a shell prompt. If so, great! Exit it and run adb logcat, and read the huge error log for problems. If you didn't get the shell, well, then I think you're screwed, unless someone has cooked up a recovery zip for enabling adb.
What happens after ADB logcat?
Thank you..

Categories

Resources