hello guys, I just got my t-mobile hd2 today and wanna to do the HSPL. Should I be using HSPL or HSPL2? I have PB81120 SS-B3, SPL-2.08.0000 8G XE, MicroP(LED) 0x05, MicroP(TOUCH) 0x50
I did it. Thanks.
Related
i have HD2 stuck at logo..
i take it to bootloader.. at bootloader its shows
PB81100 HC-BX
SPL-1.42.000 XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X04
plz. some 1 help me to fix it...
i also do hard rest but same.
Thanks in advance..
Arif Jamil
Arif Jamil said:
i have HD2 stuck at logo..
i take it to bootloader.. at bootloader its shows
PB81100 HC-BX
SPL-1.42.000 XE
MICROP(LED) 0X05
MICROP(TOUCH) 0X04
plz. some 1 help me to fix it...
i also do hard rest but same.
Thanks in advance..
Arif Jamil
Click to expand...
Click to collapse
|Hi
You need to install HSPL2 for flashing any custom roms but remember you may lose your warranty if you install HSPL2(It is possible to go back to stock spl if you need warrenty)
1. Read everything from here
http://forum.xda-developers.com/showthread.php?t=713977
You need to install HSPL2 and when you see the message You hacked it and bootloader says Cortulla HSPL
Then
Install a radio with a version comes with .50 in it. (Flashing .51 not recommend)
Then
2. download any roms from the thread and install but read the instructions from each rom you wanted to install
good luck
hai guys i hav got a htc hd2 and its in white screen
can any one plz help me to solve this problem
actually i'm new with dis pocket pc
here the info is.
PB81110 Hx-BC
Spl-1.42.0000 Xe
Microp(Led) 0X05
Microp(touch) 0x30
What were you doing?
At what step did you go to the white screen?
Remove the batery and place it back. Start the device. Is it stoping again?
pm me if you need help
Hi, i'm sorry to be a pain in the ass ive done alota reading but still got questions.
I bought a HTC HD2 from some guy, it boots right into bootloader and says...
SS-B3
SPL-2.10.0000 8g XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Its a T-mobile USA HTC HD2.
How can I get it back to stock? Ive downloaded RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50.07U_2.08.50.08_2_Ship
and ran the program but it fails at 8% due to invalid software. Im not sure which specific software i should use..You can delete this thread if its an old repost, just plz send me in the right direction.
Thanks! -Nick
Current Phone Droid X 2.2 Deodexed/Rooted FlyX Rom 1.3 GHZ.
onesicktexan said:
SS-B3
SPL-2.10.0000 8g XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Click to expand...
Click to collapse
the model id is messed up. there are several threads with this problem, some get corrupted characters. not sure how fixable that is, cos roms will look at that and think its not a hd2.
The rom you tried should have worked, though its worth trying again with the 3.14 rom from the tmous website, but i suspect the same will happen.
try flash it from sd card, or maybe its something that requires JTAG.
hello to every1
i got hd2 which was stuck on white screen
i installed hspl3 on it and installed custom rom with installation process
after dat it was working fine for 2 days and now again same problem
it got stuck on white screen here is my info
PBB1110 HX-BC
spl-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
can any one help me rgds...
3Color-Screen Messages:
"PC99100 SS-BC
SPL_0.43.0000 8G XC
MicroP(LED) 0x01
TOUCH A3(v2)"
lzonly said:
3Color-Screen Messages:
"PC99100 SS-BC
SPL_0.43.0000
MicroP(LED) 0x01
TOUCH A3(v2)"
Click to expand...
Click to collapse
should that say PB99100?if so, thats a nexus. If you have a hd2,,,,, did you flash a nexus rom??
maybe prerelease/dev device? how much ram does it state in settings->about phone->hardware?
i cannot find any other reason for leo to have 0.xx spl. correct me if i'm wong, but other device's rom isn't possible to flash without brick.
EDIT:
http://forum.xda-developers.com/showthread.php?t=708637 check here
btw i don't think you need cracking anything if you have dev device(has MFG SPL and secutiry unlock default)