Related
Hello,
I'm seeking some assistance, for a friend. he has the HTC 6800 as the thread title would imply on USCellular. I have a Samsung SCH-i760. I am trying to get him set up with WM 6.1 or at least threaded MMS.
Scince he has US Cellular he maintains that he cannot do this and or use the GPS.
any help is appreciated
BTW I searched USCellular, windows mobile 6.1 and some others and came up with very little.
so sorry for the Noob Question
BTW I was going to get the touch PRO... but VZW has implemented new policy that would charge me for a service I don't want, so it's not that I don't like HTC devices.. I'm just stuck with my Samsung.
slosho said:
Hello,
I'm seeking some assistance, for a friend. he has the HTC 6800 as the thread title would imply on USCellular. I have a Samsung SCH-i760. I am trying to get him set up with WM 6.1 or at least threaded MMS.
Scince he has US Cellular he maintains that he cannot do this and or use the GPS.
any help is appreciated
BTW I searched USCellular, windows mobile 6.1 and some others and came up with very little.
so sorry for the Noob Question
BTW I was going to get the touch PRO... but VZW has implemented new policy that would charge me for a service I don't want, so it's not that I don't like HTC devices.. I'm just stuck with my Samsung.
Click to expand...
Click to collapse
I am also looking for an WM 6.1 upgrade for my HTC 6800. USCellular does not offer one and on HTCWiki website there was not a upgrade offered because USCellular sucks. Please help!!!!!
DCD 3.3.4
ZP1085 said:
I am also looking for an WM 6.1 upgrade for my HTC 6800. USCellular does not offer one and on HTCWiki website there was not a upgrade offered because USCellular sucks. Please help!!!!!
Click to expand...
Click to collapse
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
oneders65 said:
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
Click to expand...
Click to collapse
Ok, to start off where do I find that info at? I figure its under the device info but all it gives is the ROM version which is 2.17.557.0 and for the radio it is 1.64.00....If this is not what you meant then where can I find that information. Thanks for your help by the way.
oneders65 said:
If the acronym of your carrier is USCC try the dcd's titan ROM 3.3.4
You both have to post more infomation in what ROM and Radio your Titian devices currenty have.
Look at the compatible Roms/radio/Bootloaders wiki and you should be able to determin your next step should be. PM if you get stuck.
Click to expand...
Click to collapse
Thanks man didn't really know where to start.
Using a rom like DCD is probably best for USCC customers since it's similar to their rom to begin with.
However, this is the key part for USCC customers, use QPST to backup your phone's programming, and go into EPST and write down the values from the HDR values, and after flashing the phone, use QPST to write back the values, and then go into EPST and verify your HDR values didn't change, otherwise you can lose data and/or EVDO access.
I did see that USCC put out a 6.1 upgrade for the 6900/Vogue, so this gives me some hope that they may eventually release one from the 6800. If they do then we are a lot better off because we could flash to this if the phone ever acts up and be guaranteed of warranty support. Right now, as soon as you flash the phone, you take a chance that USCC can claim you voided the warranty.
Do some research on how to use QPST and remember to write down the values in EPST and you should be fine, just take your time, and find a guide that you feel comfortable with.
BTC
Where can I find some detailed instructions for using DCD's stuff to update my USCC phone? I have looked in Q&A and on DCD's site and can't find any info. Thanks!
fish2222 said:
Where can I find some detailed instructions for using DCD's stuff to update my USCC phone? I have looked in Q&A and on DCD's site and can't find any info. Thanks!
Click to expand...
Click to collapse
Look into getting a copy of QPST, use it to read and store a copy of your phone's programming. Once you have done that, than any of the wiki's that have walk thrus on how to flash your phone will work, once it's flashed, then use QPST to read your backup file and restore it back to the phone.
Then you are all set.
If you are in SE Iowa, drop me a PM and maybe I can assist you in person.
BTC
Ok, now the question is, how do I use QPST to backup the settings? I have QPST 2.7 build 264, but all it has is COM ports, and no USB. I can't find any help or directions on how to backup the settings. I am in SE Kansas by they way, so it would be a bit of a drive. By the way, if I use this to back up the settings, do I still need to use ESPT to write down settings too?
fish2222 said:
Ok, now the question is, how do I use QPST to backup the settings? I have QPST 2.7 build 264, but all it has is COM ports, and no USB. I can't find any help or directions on how to backup the settings. I am in SE Kansas by they way, so it would be a bit of a drive. By the way, if I use this to back up the settings, do I still need to use ESPT to write down settings too?
Click to expand...
Click to collapse
You have to load the drivers for the phone on the PC, I will link you an article that has info on how to do this.
http://forum.ppcgeeks.com/showthread.php?t=36377
This is a guide to set up aGPS, but it does include instructions on how to use QPST to read the phone. Basically you just need to save the settings after reading them from the phone, and then after you are done flashing, read from your saved file and write to the phone.
FYI, this guide for aGPS works perfect on USCC, so you can get your friend hooked up with even better GPS if you follow the rest of the instructions in the guide. Tho do the rest of the steps after the phone is flashed.
As far as the EPST settings, the only things I have had to change are the HDR login and password, the password defaults to your ESN (correct), however the login defaults to your phone#@uscc.net, when it needs to be [email protected] (In HEX, not DEC)
For PPP login and password, it should be your phone#@uscc.net and phone# as password.
Without making this change, then EVDO won't work if you are in an EVDO area.
BTC
Ok, tried it, but when I tried to read the phone settings, it says that 000000 is not the correct code. Also, what info do you put in for USCC where the IP address and such goes after unchecking the boxes? I found all the other providers, but not USCC. Thanks!
fish2222 said:
Ok, tried it, but when I tried to read the phone settings, it says that 000000 is not the correct code. Also, what info do you put in for USCC where the IP address and such goes after unchecking the boxes? I found all the other providers, but not USCC. Thanks!
Click to expand...
Click to collapse
As for the SPC code, do a search for BAFMSL, and be sure to have compact .net 3.5 installed, it will show your MSL/SPC. As for the IP, use the one he gives for Altel, it works on USCC as well.
Follow all the steps for Altel.
BTC
Thanks for all the help. I got everything upgraded and now have GPS working. The only thing that seemed to be wrong was the login for data had the wrong domain name. Changed it to .uscc.net and it works great now. Now I just need to figure out how i can add themes to it.
Anybody have an themes info?
Hey guys/girls
i was messing with my mogul and now its stuck on the tri color screen.
Software
TITA100
SPL-1.20.Olipro
please if any one can help i would appreicate it.
Plug into usb and install your carriers current rom
wont let me. i get a connection error. it stops on 11% when trying to update the rom.
flash by microsd method. This will eliminate all usb problems
drewcam888 said:
flash by microsd method. This will eliminate all usb problems
Click to expand...
Click to collapse
is their any way to send me a link to the right update? because i tried the one from HTC via microcard and it wont load anything.
That would be hard in that I know nothing about your carrier. But I only have Verizon stuff. Maybe add your info to every post.
drewcam888 said:
That would be hard in that I know nothing about your carrier. But I only have Verizon stuff. Maybe add your info to every post.
Click to expand...
Click to collapse
i have sprint.
also i had 6.1 loaded inside
but now its stuck on the loader screen so prob dont have any software.
tank319 said:
wont let me. i get a connection error. it stops on 11% when trying to update the rom.
Click to expand...
Click to collapse
are you using VMWARE Fusion or Parallels Desktop?
If so, update to the lastest version and/or change the settings to "GUEST ONLY" for USB......
I has that issue a while back on a treo, several during the update process it "disconnects" the USB momentarily....
If you had it set to "ask me" then, it would attempt to "ask you.", causing the updater no not see it. (No fusion or parallels, because there is no valid firmware on the device.)
If that was your issue, let me know, please.
Just download the lastest rom and extract the .nbh from the .exe with winrar. Rename it properly and flash away.
Also, you may way to look into either olipro 2.40 or nueSPL 2.47 for your bootloader. It could be that you are trying to load an incompatible ROM. Check the wikis and stickies for a compatibility list of bootloader/radio/ROM.
i got it to turn on and stay on but i cant update it to 6.1 because of the SPL 1.20 bootloader i think how can i update it. i have dcd_2[1].0.0_beta_sprint.exe but it will not load on my phone even if i change the name. any idea's? also i tried to RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe flash that on and still gives an error.
BTW thanks alot for helping me out
Look at Step II - 1 in the wiki. http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
You are also using a pretty old ROM made by DCD. He made a bunch more that worked very well before he stopped posting.
Please go here now: http://forum.xda-developers.com/showthread.php?t=1653777
Mods should unsticky mine and sticky that instead.
Go to the above link if your a victim of virgin mobile firmware.
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
So you have no data at all? I'd try a ##data# reset first.
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
Never assume. Just because VM has a different firmware, that doesn't mean that Sprint 3d's will too. We do not fully know what the differences are between the 2 devices.
Thus the reason for this and other fix threads. I would suggest trying this fix, and see if it helps, and hope that there is a firmware fix in the future.
I will tell you how I restored my data. I first downloaded the following stock rom.
Stock 2.08.651.2 With HTC/Sprint Spyware Removed
http://forum.xda-developers.com/showthread.php?t=1285975
After flashing to the stock rooted rom above I then went into my dialer and typed in ##my MSL number# (Example: ##000000#) To get your MSL number simply download MSL reader from the market. I then clicked on edit and then edited my MDN with all zeros and MSID with all zeros. I pressed the menu button and then pressed reset. After the phone rebooted the phone activation screen came up when I unlocked the phone and it was able to automatically activate it and I got 3G data.
jlechner said:
So you have no data at all? I'd try a ##data# reset first.
Click to expand...
Click to collapse
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
Hockey, I have not seen this issue yet on my rom, PM me if you want to try mine, and let me know if you see any difference. I wonder if some of the SMS issues have to do with the ICS rom itself. BTW do not post my ROM anywhere as I do not release my stuff public, just want to help out a fellow hardcore flasher.
Cheers
jlechner said:
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
Click to expand...
Click to collapse
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Touch base with Mikey.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
This thread can't be deleted. This has good info we need up.
I know it says Chad in it, but should we just take the name out?
Well, if we did, then we won't give credit where it's due.
Anyways,
Is there any general thought on the rough percentage of people this works 100% for?
Mikee4fun said:
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
Click to expand...
Click to collapse
is there a way to get to 1.42_003?
Thank god there's another one of these!
Ok so I got back from sprint again and the were totally in awe and had no idea whatsoever was wrong with my phone They ordered me a new one and it'll be here on like tuesday or wednesday and i'll see if I can get it not activated already.
Btw the sprint people are totally dumb.... They were talking to a couple and saying yeah, the more storage a phone has the faster it'll be! He said that 32gb phones out performed 16gb phones.... I was like wtf man... Also he was trying to sell them the galaxy s 2's and was telling them that they're new phones. Wtf sprint salesman, wtf...
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
The 005 mod is actually 003, from my understanding.
Sent from my Sprint/Virgin Mobile hybrid.
jlechner said:
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
Click to expand...
Click to collapse
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
Yes, you need to go through the adb push process stated in the OP. I can assist you if you want through team viewer if you don't want to tackle it.
Unknownforce said:
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
Click to expand...
Click to collapse
Cool thanks!
Sent from my Sprint/Virgin Mobile hybrid.
I've been asked by lots of folks on how to convert the HTC 10 unlocked US version into a full-featured Verizon version so I figured i'd write an all encompassing guide on how to complete the process.
After following this guide, your phone will effectively be a fully-functioning Verizon variant. IMS, advanced calling, wifi calling and all other Verizon features will work flawlessly!
Note: I am purely compiling this information. I had no part in discovering this process, I simply followed multiple guides and other random posts on XDA to accomplish this! Credits go to @jcase, @beaups, @dottat, and any others that were involved with testing this process. Please make sure to thank these guys for the work they've done.
Step 1: Unlock bootloader and acquire s-off
In order to modify the CID/MID and change the radio, we must first acquire s-off. The easiest way to do this is to follow jcase's well-written guide.
[FONT=Hind, sans-serif][Guide] Root (Optionally s-off) and Keep your radio working[/FONT]
Move on to step 2 after finishing the above guide to completion.
Step 2: Change CID and MID
2a) Download this link, and extract into your directory of choice
https://www.androidfilehost.com/?fid=24545065934258327
2b) Boot your phone into download mode via the button combo (down + power) or by using adb reboot-bootloader with USB debugging turned on and then selecting download mode
2c) Issue the following command while in download mode:
Code:
htc_fastboot oem writecid VZW__001
2d) Issue the following command while in download mode:
Code:
htc_fastboot oem writemid 2PS650000
2e) Reboot phone back into download mode and verify the CID and MID have changed and are correct.
Step 3: Flash Verizon RUU to phone
Now that we have s-off, unlocked bootloader and the proper CID/MID on our device, now we just need the Verizon stock ROM and radio on our device. The Verizon RUU will handle both of these for us in a relatively hassle-free manner.
3a) Download the following .exe file to your local machine (big thanks to @dottat!)
Verizon Stock RUU exe (dottat)
3b) Boot phone into download mode (or Android OS w/ USB debugging enabled) and run the executable file
3c) Follow onscreen instructions and wait for process to finish
3d) Reboot phone (it may take a while to boot so BE PATIENT! mine took about 4-5 minutes if I recall)
After your phone boots, it will be a fully functioning Verizon phone. At this point, you can go activate your phone and it will work. You will be able to take Verizon official OTAs and it will behave identically to the true Verizon variant due to the RUU re-flashing stock recovery and an unmodified system.
OPTIONAL -- Step 4: Re-root phone
The RUU that you deployed on your phone was an unrooted system image with stock recovery. In order to get root back, you will need to re-do steps 1-10 in jcases's Root/s-off guide from step 1.
Here's the link again in case you're too lazy to scroll back up
[FONT=Hind, sans-serif][Guide] Root (Optionally s-off) and Keep your radio working[/FONT]
Reminder: your phone already has s-off so you ONLY NEED TO DO STEPS 1-10! Running Sunshine again will likely just report that your phone already has s-off so no worries if you accidentally do the entire guide again.
Step 5: Activate your phone
This step can be very straightforward or a moderate pain the ass depending on what you have available to you.
There are two ways to activate the HTC 10 now that it's running stock Verizon firmware/software:
1) Pop an existing, activated nano-SIM with your current phone number on it in the device and reboot. Voila!
2) Take your device to a Verizon store and convince the employee that your phone is in fact, a true Verizon phone.
I would highly suggest using an already active nano-SIM if you have that available. I, unfortunately, did not as I was coming from the Verizon LG G4. I had to go three different Verizon stores to convince them to finally activate the device. Your IMEI on your unlocked 10 will not show up in Verizon's IMEI database. The store clerk actually had to pull an IMEI from a display model HTC 10 so that she could get the nano-SIM activated for my 10.
noahjk said:
Good post! I think you're looking for this link: http://forum.xda-developers.com/htc-10/how-to/guide-root-optionally-s-off-radio-t3373025
Click to expand...
Click to collapse
Good catch, thanks. I updated the links.
Tried this twice, both times my phone gets stuck on 'Preparing your phone...' after flashing and rebooting on the setup wizard.
edit: worked fine after removing SIM. Run through the setup without SIM for anybody having issues. I know this isn't explicitly stated in OP but if you're having issues, make sure you try this.
If anyone is having connection issues after putting in your SIM, you have to change your Preferred Network mode from Global to LTE/CDMA.
Other than that, everything's working great! Even comes with free VZW bloatware
anyone receiving "Htcdm has stopped" on their phone all of a sudden .... i just downloaded a few things, changed the bootanimation, setup my hotspot, and then bam - popups randomly.
codelinx said:
anyone receiving "Htcdm has stopped" on their phone all of a sudden .... i just downloaded a few things, changed the bootanimation, setup my hotspot, and then bam - popups randomly.
Click to expand...
Click to collapse
Haven't seen that before. What did you do to setup your Hotspot?
DoctorB0NG said:
Haven't seen that before. What did you do to setup your Hotspot?
Click to expand...
Click to collapse
That error would be the ota downloader.. what anything frozen I would ask the person who posted
Sent from my HTC6545LVW using Tapatalk
How would I revert back to the stock values and a stock unlocked RUU? Can you put that in the guide with a link to a stock RUU?
Zooks97 said:
How would I revert back to the stock values and a stock unlocked RUU? Can you put that in the guide with a link to a stock RUU?
Click to expand...
Click to collapse
I'd *think* that you just do the opposite of this guide.
Write MID/CID back to UL (UnLocked) Variant version along with then flashing the UL Variant RUU.
I agree it would be a good idea to add the return to stock either in the OP, or possibly a link to another thread explaining how.
andybones said:
I'd *think* that you just do the opposite of this guide.
Write MID/CID back to UL (UnLocked) Variant version along with then flashing the UL Variant RUU.
I agree it would be a good idea to add the return to stock either in the OP, or possibly a link to another thread explaining how.
Click to expand...
Click to collapse
Looks like all the stock information, RUUs, roms, and recoveries are here.
Has the MID/CID for stock there as well. Hope this makes it into the OP.
When I have access to a desktop/laptop I'll update the guide. Thanks for the suggestions.
After following all the instructions, I got to the end where the phone reboots and is supposed to be Verizon. When mine reboots, however, it comes up with the decryption screen asking for my password. Any ideas?
I think I might have figured it out. I did a factory reset/wipe and it looks like it's coming up now.
hunteditor said:
After following all the instructions, I got to the end where the phone reboots and is supposed to be Verizon. When mine reboots, however, it comes up with the decryption screen asking for my password. Any ideas?
I think I might have figured it out. I did a factory reset/wipe and it looks like it's coming up now.
Click to expand...
Click to collapse
Yep that's the fix. The vzw ruu does not wipe.
Sent from my HTC6545LVW using Tapatalk
andybones said:
I'd *think* that you just do the opposite of this guide.
Write MID/CID back to UL (UnLocked) Variant version along with then flashing the UL Variant RUU.
I agree it would be a good idea to add the return to stock either in the OP, or possibly a link to another thread explaining how.
Click to expand...
Click to collapse
Did you pick up a 10 yet?
aer0zer0 said:
Did you pick up a 10 yet?
Click to expand...
Click to collapse
I did.
It's prepared to be sent to Mr. @beaups when they are back doing devices again on May 22nd.
(In my signature below, in green are the devices I currently own, and the ones striked out are previous devices I had but are sold).
Just an FYI, I followed instructions on this guide, did everything without SIM card in and I do not have any advanced calling features. Signal drops to 1x when on a call and there is no Wi-Fi calling option in the advanced calling menu within Android. My guess on the cause is that I flashed TWRP and side loaded SuperSU before I put my SIM in the phone. I will try again from scratch and activate the phone prior to root and recovery and report back. Is anyone else having similar issues?
Light1984 said:
Just an FYI, I followed instructions on this guide, did everything without SIM card in and I do not have any advanced calling features. Signal drops to 1x when on a call and there is no Wi-Fi calling option in the advanced calling menu within Android. My guess on the cause is that I flashed TWRP and side loaded SuperSU before I put my SIM in the phone. I will try again from scratch and activate the phone prior to root and recovery and report back. Is anyone else having similar issues?
Click to expand...
Click to collapse
Did you activate those features on your account using the menu on the phone?
Sent from my HTC6545LVW using Tapatalk
dottat said:
Did you activate those features on your account using the menu on the phone?
Click to expand...
Click to collapse
What menu are you talking about? I went to take a screen shot of my advanced calling menu in settings and now Wi-Fi calling is showing up.. I didn't change a thing, very odd. However, my signal still drops to 1x when placing a call. And my device says non-VZW device when I login to my account online. I'm guessing that is part of the problem.
Light1984 said:
What menu are you talking about? I went to take a screen shot of my advanced calling menu in settings and now Wi-Fi calling is showing up.. I didn't change a thing, very odd. However, my signal still drops to 1x when placing a call. And my device says non-VZW device when I login to my account online. I'm guessing that is part of the problem.
Click to expand...
Click to collapse
Take some screen shots.
Sent from my HTC6545LVW using Tapatalk
Here is my advanced calling menu with Wi-Fi calling now showing up. Haven't tested, but it seemed to let me set it up. I have Wi-Fi tether enabled via default.xml edits. The one feature I'd really like is LTE on call. Had this without problem on my M7 but I think thats because it had multiple radios and didn't have to share a radio while on call. My noob guess anyways.
Maybe it's a setting in the hidden dialer menu *#*#4636#*#*? However, when I enter that into the dialer, nothing happens, the entered numbers just disappear and nothing happens. Thoughts?
Honestly found it on XDA of all places after looking for it all night
What does 1.16 give us that 1.14 doesn't? Everything honestly. Could not get my Wing recognized to flash with 1.14. No 1.15 Patched exists either
We can downgrade with ChipErase (and restore IMEI), we can modify PDM, we can dump the entire phone (will do tomorrow), can upgrade.
See link here for link: https://forum.xda-developers.com/t/...er-w-fastboot-drivers-and-common_dll.4304181/
This was the only working LGUp_Tool that worked outside of LGUP CMD
I wanted this to try other countries firmware files to see if we get other weird results. This should also allow custom KDZ files? from my understanding
ADDED INFO Nov 8, 2021
How to use LGUp Tool From this Download
1.) Download the LGUp 1.16.03 Patched from the XDA Link above
2.) Run the EXE as admin so it can install Drivers and the software properly
3.) Go to the install directory and run the 2 Bat files that are in the folder as admin
Code:
Default: C:\Program Files(x86)\LG Electronics\LGUp
-- Running LGUP_UI-fixer.bat -- run as admin, follow instructions, run the software when it says to, then close it
-- Run LGUP_UI-Fixer-addon.bat -- run as admin, follow steps, then run LGUp.exe when patch complete
You now have a working LGUP Tool 1.16 Patched for the LG Wing
Explaining the functions of LGUP Tool
Code:
REFURBISH： You will lose all user data（KDZ or TOT）
UPGRADE: Keep data and update your phone（KDZ or TOT) - Select Upgrade to flash kdz firmware to unbrick/restore your phone back to stock.
Chip Erase: Dangerous, This will erase IMEI/efs, do not try this if you do not have a NV backup. - Chip Erase can also remove the Google FRP on many LG devices with Android 5.0, 6.0.
PARTITION DL：Flash the single Partition or selected partitions onto your phone. - This feature can solve “unknown model” issues. This feature can be used to bypass Google FRP by flashing specific tot firmware.
DUMP：Dump all partitions of your phone as backup. - Dump the stock firmware from a working phone as back up and use Partition DL to restore phones.
FOTA Upgrade: This can be used to flash OTA Update file that comes with dot up file extension.
PDM: Change imei, wifi address, bluetooth, mac address
video for how to use LGUP Tool to flash the Wing
Awesome! I just DL'ed.. don't know when I'll have time to mess around with it. Or if I have the skill set to help. But I would definitely try to help out if I can and be excited for rootable firmware.
kaluna00 said:
Awesome! I just DL'ed.. don't know when I'll have time to mess around with it. Or if I have the skill set to help. But I would definitely try to help out if I can and be excited for rootable firmware.
Click to expand...
Click to collapse
I plan on making a video I'll put on the post explaining the tool
KaptinBoxxi said:
I plan on making a video I'll put on the post explaining the tool
Click to expand...
Click to collapse
Holy cow I can’t believe it. You actually found the exact tool that we needed! I went ahead and did a chip erase on my demo model, which had previously been flashed with the Korean firmware from the previous tutorial, and flashed the T-Mobile Firmware. IT WORKED! To get rid of the error at that shows up every time you reboot it, I accessed the hidden menu and changed the TN number to the one associated with TMO_US, as shown in this post.
Thank you!
twocans said:
Holy cow I can’t believe it. You actually found the exact tool that we needed! I went ahead and did a chip erase on my demo model, which had previously been flashed with the Korean firmware from the previous tutorial, and flashed the T-Mobile Firmware. IT WORKED! To get rid of the error at that shows up every time you reboot it, I accessed the hidden menu and changed the TN number to the one associated with TMO_US, as shown in this post.
Thank you!
Click to expand...
Click to collapse
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
KaptinBoxxi said:
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
Click to expand...
Click to collapse
Where did you get the Verizon firmware?
kaluna00 said:
Where did you get the Verizon firmware?
Click to expand...
Click to collapse
I found a site that had a "KDZ Downloader" and used that to download it. I can upload it here for those who need it once i redownload it here at work
or you can yourself from this post. Just need the LG URL to the firmware
[LG TOOLS] LG-KDZ-dll-Tool/LGUP_UI-fixer/LG-Kdz-downloader
Please, do not share elsewhere as I want to be able to update if necessary ! LG-KDZ-dll-Tool/KDZ dll extractor (=old version) : this message actually, scroll down a bit... LGUP_UI-fixer LG-Kdz-downloader Share this thread or my blog instead...
forum.xda-developers.com
KaptinBoxxi said:
I still can't get mine to accept a sim card and get data but I can make calls/text and use wifi, which is nice.
I wish Partition DL worked, we'd have the boot.img
I flashed Verizon Firmware and put the Verizon NT Code using PDM Mode, still didn't work. Going to try others later
Click to expand...
Click to collapse
I bought a mint mobile trial sim from amazon and I’m getting calls, text, and 5G data.
twocans said:
I bought a mint mobile trial sim from amazon and I’m getting calls, text, and 5G data.
Click to expand...
Click to collapse
I get calls and text, no cell service at all. I had to manually program in an IMEI. My IMEI comes back as 0 if I just flash it without PDM. IMEI doesn't apply via the service menu either
KaptinBoxxi said:
I get calls and text, no cell service at all. I had to manually program in an IMEI. My IMEI comes back as 0 if I just flash it without PDM. IMEI doesn't apply via the service menu either
Click to expand...
Click to collapse
Interesting. I was able to generate an IMEI in the hidden menu after the chip erase and it worked fine. I did also have to re-add my CSN, because that was also removed, and then my phone did an unprompted factory reset and rebooted.
By the way, when you flashed it, did you use Refurbish? Because with my demo unit, it refused to let me do that and would only allow chip erase. I was reluctant, but it turned out fine. And, the only important thing I was unable to reprogram afterwords was the S/N, but it doesn’t really matter to me. (Too bad the fingerprint scanner still doesn’t work though. That’s the only thing left that still isn’t working after all of this.)
twocans said:
Interesting. I was able to generate an IMEI in the hidden menu after the chip erase and it worked fine. I did also have to re-add my CSN, because that was also removed, and then my phone did an unprompted factory reset and rebooted.
By the way, when you flashed it, did you use Refurbish? Because with my demo unit, it refused to let me do that and would only allow chip erase. I was reluctant, but it turned out fine. And, the only important thing I was unable to reprogram afterwords was the S/N, but it doesn’t really matter to me. (Too bad the fingerprint scanner still doesn’t work though. That’s the only thing left that still isn’t working after all of this.)
Click to expand...
Click to collapse
I plan on testing every function to document what happens, so far I've done Refurbish, Partition DL, Dump, PDM and ChipErase. only Dump didn't work
Nice work fellas!!! Exciting to see some movement towards being able to root/development.
kaluna00 said:
Nice work fellas!!! Exciting to see some movement towards being able to root/development.
Click to expand...
Click to collapse
@KaptinBoxxi
BTW... How do you get to the hidden menu on the Verizon Varient?
kaluna00 said:
@KaptinBoxxi
BTW... How do you get to the hidden menu on the Verizon Varient?
Click to expand...
Click to collapse
I think its the same dial code. I don't have the device in front of me at the moment to say
I tried this earlier...
Post in thread 'LG Wing 5G Network option activation' https://forum.xda-developers.com/t/lg-wing-5g-network-option-activation.4285275/post-85116977
Am I using the wrong dial code for Verizon?
kaluna00 said:
I tried this earlier...
Post in thread 'LG Wing 5G Network option activation' https://forum.xda-developers.com/t/lg-wing-5g-network-option-activation.4285275/post-85116977
Am I using the wrong dial code for Verizon?
Click to expand...
Click to collapse
I have yet to have network work on my demo device regardless of what firmware is on it because my Serial Number and IMEI always come back at 0 and even if I manually enter new ones, it doesn't acivate, although i was able to get to the menu just fine with the standard code in that post.
Interesting, I wonder if there's something different in your firmware or kdz...
looking at the software version. mine is on
F100VM10i
maybe they (Verizon) patched out the hidden menu. your KDZ is labeled
F100VM10d
???
kaluna00 said:
looking at the software version. mine is on
F100VM10i
maybe they (Verizon) patched out the hidden menu. your KDZ is labeled
F100VM10d
???
Click to expand...
Click to collapse
I'm not sure what the final letter signifies, but F100V is verizon, yeah
KaptinBoxxi said:
I'm not sure what the final letter signifies, but F100V is verizon, yeah
Click to expand...
Click to collapse
think that represents the SW iteration identifier between updates... bit of a guess, but i believe that character has changed with updates.