Related
I followed all of the instructions on this post:
forum.xda-developers.com/showthread.php?t=442480
No problems at all doing any of it.... BUT I have a G1 that had 1.6. Now it's 1.0. Everything seemed to work fine, but when I try to update with any ROM it does not seem to work... still 1.0.
When I restart it by holding the power and the home button I do not get the menu screen that all tutorials seem to have, I still get the Exclamation mark and have to hit Alt S.
Any suggestions? I have tried loading Cyanogen and 2 different JesusFreak versions. But no changes. ???
EDIT: Ok I just found this ...
to see is you are "rooted" download or use terminal app
At the $ prompt type su <enter>
should return a prompt now of
#
I downloaded the terminal app and it says permission denied when I type in su.
SO I guess it's not rooted...BUT everything I did with the instructions went off without a hitch. Did the telnet instructions with no problems....??? AHHHH!
NEW EDIT! OK I found this video "Rooting the G1 to Amon RA's Recovery " on you tube. Followed the simple instructions, everything worked great. So now I have 1.5.2, booted pressing home and power and got the menu screen for the first time ever. Tried to run an update and that menu screen is gone, I'm back to the exclamation point. And still su does not work in the terminal. And telnet only gives me a connection error now. PLEASE HELP!!!!
Ok I started over did ALL OF THIS:
If you have US-RC30/UK-RC8 or higher, you will first need to downgrade your phone to a previous version. (Skip these steps otherwise)
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry boot loader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
Rooting your RC29 or lower phone:
On RC29 phones and lower, anything you type into your keyboard is also being run in a hidden console with root permissions. More information regarding that at the bottom of this post. But, to get root access, do the following:
Instructions:
1. Download recovery.img or the new version by Amon recovery-RA-dream-v1.5.2.img and copy it to your SD card (see the previous instructions on how to copy from your computer to your Phone's SD card).
2. Download the Hard SPL and copy the zip file to the SD card.
3. All files must be on the root of your SD card.
4. Restart your phone. Wait for your phone to start up fully and show the home screen.
5. After your phone starts up, hit the enter key twice, type "telnetd" and press enter. (Yes, it will start up a contact search, don't worry. Just type it.)
6. Download an Android "Telnet" application from the Market and connect to localhost.
7. If you connect successfully, you will have a root prompt "#".
8. Type the following into Telnet (these commands will give you root access easier in the future):
* mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
* cd sdcard
* flash_image recovery recovery.img
* cat recovery.img > /system/recovery.img
Now you have root!
SO, it says I should have root now. I downloaded the terminal, typed in su and it says access denied. ???
Wow. I cant believe that not as single person is willing to help me on a forum about this subject.
So I started over for the 4th time. Again did everything, it all goes smoothly. But still do not have permission when I type in su to a terminal.
I loaded Amon Ra Recovery, then loaded signed killa 1.5.
It worked, I see 1.5, but when I reboot I do not get the menu, I still get the exclamation point..... I only get the menu on the first reboot after loading the Amon Ra Recovery.
PLEASE ANY HELP I'M DYING OVER HERE!!!
fellow g1 er
Theunlocker ddoott coom
For g1 Has two part video about going bqack to early version and then flashing foward to get root
It worked for me.
However you should be aware that their procedure uses something other than dangerecovery which cyanogemod requires. To use froyo 2.2 android.
I found this out AFTERFLASHING FROYO so now oi have to backtrack.
Thunlocker also links to a g1 android version with root whiicch what you flash last from the sd
card using amonra recovery.
I do however haave root. And the unlocker basic root rom worked well until I flash cyanogen mod rc3
But rc3 does still have root on my phone. It just doesn't run well because only danger recovery can partition the nand chip properly apparently and I haven't done that yet.
Furthermore be aware if you install gapps that there are two versions mdpi and hdpi and no one tells you but I think only mdpi works on g1 .
I found out after flashing hdpi myself.
Wish others would help.
We are the blind leading the blind.....
If you find something that gets you cyanogenmod worling with google apps market then please tell me how.
At least if you follow the unlocker videos you will have root.
Get it from their webpwage not you tube because the webpage has the steps written out as well.
I'm in need of the stock kernal image and the clockwork recovery.zip file thingy.
NOT the zip verson of the kernal installer.
My situation, I was stupid and installed the voodoo thing, then for someone reason I tried to flash Froyo over Bionix with the voodoo kernal thing. It didnt work so I decided to deleted everything in clockwork. Then I was like omg I cant use clock work or boot my device (stuck on vibrant screen but I can get to odin and the stock recovery).
Later I read that voodoo stopped odin on the cm forum so I couldnt use it. Thats what some dude named viralblack said and theyre a mod so I'm guessing its true.
So my last 4 ideas are:
1)Try and flash a new Kernal Image in adb and hope it gets odin to work
2)Push the cw recovery to the phone
3)Run to the library and hope my computer is the problem
4)Pretend vb is wrong and keep trying the download screen thing
Sorry if this is in the wrong section but I guessed it could go here because I need some files....
flash Eugene's froyo that does not brick via Odin. he has instructions in his thread.
...and it's kernel NOT kernal people
Sent from my SGH-T959 using XDA App
kernel, sorry I guess?
Anyhow what if my pc doesnt notice the phone when its in download mode
RPGbig said:
kernel, sorry I guess?
Anyhow what if my pc doesnt notice the phone when its in download mode
Click to expand...
Click to collapse
Download the Samsung drivers, download ODIN, and then just follow the directions in the ODIN thread
Wow
You guys have nothing better to do than flame a newb?
If you spent half the time helping instead of flaming there MIGHT just be some people with a bit more knowledge than they had yesterday.
If you cant say something constructive/helpful --Why bother!
fcbarca17 said:
Download the Samsung drivers, download ODIN, and then just follow the directions in the ODIN thread
Click to expand...
Click to collapse
Push doesnt seem to work. Permission denied or something rather.
As I said in my first odin wont work, yes I did those things like 10 or so times.
You cant expect a newborn to know how to wipe themselves.
RPGbig said:
Push doesnt seem to work. Permission denied or something rather.
As I said in my first odin wont work, yes I did those things like 10 or so times.
You cant expect a newborn to know how to wipe themselves.
Click to expand...
Click to collapse
What do you mean "push doesn't work". Are you trying to push a file via adb? If you are getting permission denied errors, that is because you either do not have root access/permissions to write to the location you are trying to push to, or because the location you are trying to push to is mounted as read-only.
If you indeed have the necessary permissions (i.e., root), then `adb remount` will re-mount the device's partitions as read-write. If adb does not allow you remount the partitions in this manner, it is because you do not have the permissions to perform the duty.
If anyone is going to give any further help, though, you need to give us a bit more information. Can you access the device via adb? Can you boot into either download or recovery? (If you have adb access, you can usually boot into either of those with `adb shell reboot download` or `adb shell reboot recovery`.) Have you attempted to flash anything via Odin? What is the exact wording of the error messages you are receiving?
If you don't provide information, you won't receive any help. Vague responses such as "Permission denied or something rather" are useless because something rather can be any number of things. Also, attempting things without reading all of the information available beforehand is another way to ensure that people will be hesitant to give you help; this forum already has threads about where to locate the stock kernel image.
Also, instead of positing what-ifs such as "Anyhow what if my pc doesnt notice the phone when its in download mode", why don't you try putting your device into download mode and attaching it to a Windows computer with the proper drivers installed and Odin running, and then ask what the next step might be after you have attempted to do something?
People get angry about members flaming newbies for posting mistakes and asking for help, but if newbies looked for answers and read all of the information available before doing something they didn't understand (or only partially understood), then this wouldn't be a problem in the first place.
rpcameron said:
What do you mean "push doesn't work". Are you trying to push a file via adb? If you are getting permission denied errors, that is because you either do not have root access/permissions to write to the location you are trying to push to, or because the location you are trying to push to is mounted as read-only.
If you indeed have the necessary permissions (i.e., root), then `adb remount` will re-mount the device's partitions as read-write. If adb does not allow you remount the partitions in this manner, it is because you do not have the permissions to perform the duty.
Click to expand...
Click to collapse
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
I type 'adb remount' its says ' remount failed: No such file or directory
rpcameron said:
If anyone is going to give any further help, though, you need to give us a bit more information. Can you access the device via adb? Can you boot into either download or recovery? (If you have adb access, you can usually boot into either of those with `adb shell reboot download` or `adb shell reboot recovery`.) Have you attempted to flash anything via Odin? What is the exact wording of the error messages you are receiving?
Click to expand...
Click to collapse
Yes, I can get into both.
I've download Froyo that doesnt brick. Unziped and got had the drivers from sansumg set up.
I usually type 'adb reboot download' to get into download mode for odin. Then when the phone shows the android guy with the shovel. Then my computer says that an unrecognized usb device has been connect.
This time I type 'adb shell reboot recovery' and its said
'-exce `/system/bin/sh` failed: No such file or directory (2) -'
rpcameron said:
If you don't provide information, you won't receive any help. Vague responses such as "Permission denied or something rather" are useless because something rather can be any number of things. Also, attempting things without reading all of the information available beforehand is another way to ensure that people will be hesitant to give you help; this forum already has threads about where to locate the stock kernel image.
Also, instead of positing what-ifs such as "Anyhow what if my pc doesnt notice the phone when its in download mode", why don't you try putting your device into download mode and attaching it to a Windows computer with the proper drivers installed and Odin running, and then ask what the next step might be after you have attempted to do something?
People get angry about members flaming newbies for posting mistakes and asking for help, but if newbies looked for answers and read all of the information available before doing something they didn't understand (or only partially understood), then this wouldn't be a problem in the first place.
Click to expand...
Click to collapse
RPGbig said:
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
Click to expand...
Click to collapse
You have to be rooted.. But why would you even take the hard way to use clockwork? Just download it from the market..?
I have odin with all the files that will get u to stock of ur phone. Also the froyo files does not brick. So now i exactly dont know what u need. go cows
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
RPGbig said:
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
Click to expand...
Click to collapse
If your phone is stuck in a bootloop you need to flash your phone with odin
RPGbig said:
Goalush Clockwork Recovery so I can flash Bionix.
What Happens:
1. Go into recovery
2. Connect to the phone with adb
3. I type 'adb push c:\update.zip /sdcard'
4. It says 'failed to copy `c:\update.zip` to `/sdcard/update.zip` : Permission denied
I type 'adb remount' its says ' remount failed: No such file or directory
Click to expand...
Click to collapse
OK, if `adb remount` isn't working properly, then you have to manually instruct the system to remount the system partition as read-write. This is a little different from other Android devices, because Samsung insists on using their screwy RFS. On my device, the system partition resides at /dev/block/st19. If you can get an adb shell session, opened, you can verify it by running `mount`, and seeing which /dev node is assigned to /system. Then, manually remount the system partition with `mount -o remount,rw -t rfs /dev/block/st19 /system`; this must be done as root.
It does seem a bit odd that you are getting a permission denied error on /sdcard. Are you sure that /sdcard is mounted? You can verify the same way you check what /dev node holds you system partition. On my Vibrant, /sdcard is the mount point for /dev/block//vold/179:1 (yes, that is two slashes after block). So, the command to mount the internal SD card is `mount -o remount,rw -t vfat /dev/block//vold/179:1 /sdcard`.
Now those commands should ensure that you have both your system partition and SD card mounted as read-write. Now you can copy over the update.zip that contains ClockworkMod recovery to the root of your SD card (/sdcard) with `adb push drive:\path\to\recovery.zip /sdcard/update.zip`. I recommend specifying a destination filename for update.zip. Also, sometimes an adb push command requires the trailing / of a directory.
RPGbig said:
Yes, I can get into both.
I've download Froyo that doesnt brick. Unziped and got had the drivers from sansumg set up.
I usually type 'adb reboot download' to get into download mode for odin. Then when the phone shows the android guy with the shovel. Then my computer says that an unrecognized usb device has been connect.
This time I type 'adb shell reboot recovery' and its said
'-exce `/system/bin/sh` failed: No such file or directory (2) -'
Click to expand...
Click to collapse
This last statement looks like either your system partition is not mounted, or that it does not have a shell installed. From an adb shell session, check the /system/bin directory and see if there is indeed a shell binary there (either sh itself, or sh linked to another shell such as bash). If there is no /system, then it means that your system partition is not mounted, and you can follow the steps I previously mentioned to mount the system partition.
RPGbig said:
I messed up my phone and its stuck in a bootloop. I want to put that recovery on my phone so I can flash a new rom.
Click to expand...
Click to collapse
Can you boot into recovery using the VOL_DN and POWER method, or does the adb daemon ever come online during the bootloop? If so, then either boot into recovery from a powered-off state, or use the adb shell to boot it into recovery.
http://forum.xda-developers.com/showthread.php?t=810130
rpcameron said:
OK, if `adb remount` isn't working properly, then you have to manually instruct the system to remount the system partition as read-write. This is a little different from other Android devices, because Samsung insists on using their screwy RFS. On my device, the system partition resides at /dev/block/st19. If you can get an adb shell session, opened, you can verify it by running `mount`, and seeing which /dev node is assigned to /system. Then, manually remount the system partition with `mount -o remount,rw -t rfs /dev/block/st19 /system`; this must be done as root.
It does seem a bit odd that you are getting a permission denied error on /sdcard. Are you sure that /sdcard is mounted? You can verify the same way you check what /dev node holds you system partition. On my Vibrant, /sdcard is the mount point for /dev/block//vold/179:1 (yes, that is two slashes after block). So, the command to mount the internal SD card is `mount -o remount,rw -t vfat /dev/block//vold/179:1 /sdcard`.
Now those commands should ensure that you have both your system partition and SD card mounted as read-write. Now you can copy over the update.zip that contains ClockworkMod recovery to the root of your SD card (/sdcard) with `adb push drive:\path\to\recovery.zip /sdcard/update.zip`. I recommend specifying a destination filename for update.zip. Also, sometimes an adb push command requires the trailing / of a directory.
This last statement looks like either your system partition is not mounted, or that it does not have a shell installed. From an adb shell session, check the /system/bin directory and see if there is indeed a shell binary there (either sh itself, or sh linked to another shell such as bash). If there is no /system, then it means that your system partition is not mounted, and you can follow the steps I previously mentioned to mount the system partition.
Click to expand...
Click to collapse
I tried 'adb root' and then it said 'adbd cannot run as root in production builds'
By shell session do you mean 'adb shell'? No, I dont believe that works because I get 'adbd cannot run as root in production builds'
When you mean 'shell installed' you do I have it installed on the phone? If it isnt is there anyway I could do it now?
`adb push drive:\path\to\recovery.zip /sdcard/update.zip` didnt work and gave me 'c:\update.zip' to '/sdcard/update.zip': Permission denied
Can I flash /system via my pc onto my phone? or Use the external sdcard instead of the internal?
Dude, if your phone is stuck in a bootloop, you HAVE TO FLASH IT VIA ODIN. There's no other work-around.
RPGbig said:
I tried 'adb root' and then it said 'adbd cannot run as root in production builds'
By shell session do you mean 'adb shell'? No, I dont believe that works because I get 'adbd cannot run as root in production builds'
When you mean 'shell installed' you do I have it installed on the phone? If it isnt is there anyway I could do it now?
`adb push drive:\path\to\recovery.zip /sdcard/update.zip` didnt work and gave me 'c:\update.zip' to '/sdcard/update.zip': Permission denied
Can I flash /system via my pc onto my phone? or Use the external sdcard instead of the internal?
Click to expand...
Click to collapse
Why did you try `adb root`? I don't quite understand that.
A shell session would be `adb shell`, yes. On your computer's command line, invoke `adb shell`. You are now in a shell session. What does the prompt look like? Is it "#" or "$". If it is a hash, then you have root access via adb. If it is a dollar sign, then you do not have root access; try running `su` from within the shell session. If the prompt does not change to a hash, then you are stuck for the moment, because you do not have root access via adb, and therefore nearly all of the adb commands will not work.
By "shell installed" I was referring to a shell interpreter installed on your handset. bash is the most commonly installed Linux shell, and sh is usually just a pointer to bash. If your handset does not have either /system/bin/sh or /system/bin/bash (or anything similar), then you have an incomplete system, and it got messed up along the way with something you did.
But, since it seems that you cannot gain root access through adb, and therefore cannot (re)mount your partitions, you are basically limited in your options. All you can really do is put your phone in download mode, and use Odin to reflash a complete system (including a kernel image). I would also recommend that you use the repartition option in Odin to make sure that your partitions are reformatted and you are essentially left with a wiped and clean handest to start with.
(Lack of root access via adb has severely limited your options. You are basically left with Odin as your only avenue of recourse, unless you are willing to disassemble your device to get to the internal SD card.)
Have you opened yours? Is it an actual (micro) sdcard that can be taken out like the external one?
I typed 'adb root because typing 'adb' showed this
adb root - restarts the adbd daemon with root permissions
so I guess that was what you ment by root.
When I type 'adb shell' all it gave was - exec '/system/bin/sh' failed: No such file or directory (2) -
You need to stop trying to do it the hard way and just use Odin. If your phone is not being recognized then you need the correct drivers. Once installed, you should be back up and running within 5 minutes. Stop lollygagging and fix your phone already.
First, you need to be sure you install the sdcard version of the recovery, otherwise you won't be able to do this. (You need to goto this thread to install the sdcard version and follow instructions.
First of all, make sure your drivers are setup properly as this is a windows script to fix everything since you can only fix it from a computer. (I CANNOT EMPHASIZE THAT ENOUGH!)
Then you just download this zip, it check's md5 sum on the image before flashing so no worries, and then it flashes. It will reboot when it's finished.
I am in NO way responsible should anything happen, it was your fault for not checking the app's md5 in the first place so if this works for you, openly admit that you could have been better with handling the app's flashing. <-- Required.
I'm having a seperate thread so I can actively update this with anything that may arise since it would make my app's thread cluttered.
Read the whole thread or enjoy a broken Ntab, it's your choice.
Just wanted to say thanks for the dedication to those of us not smart enough to figure things out on our own.
Sent from my BNTV250 using Tapatalk
is this for those nt cannot use sd card recovery or 8 times boot break to restore the originally rom?
Dumb Question
Total noob question. What do you mean by drivers set up properly? I want to try this, but I do not want to screw up again, and I just want to be totally sure I understand this properly. Thanks.
Benblanko81 said:
Total noob question. What do you mean by drivers set up properly? I want to try this, but I do not want to screw up again, and I just want to be totally sure I understand this properly. Thanks.
Click to expand...
Click to collapse
Means that you must have your nook drivers installed and working, if you ever rooted then you should have your drivers working properly.
~ Veronica
Can't get this to work
I have verified that I have the proper drivers (thanks Veronica). I unzip the fix and run the batch file, but the window closes almost instantly. I am using an XP machine, because of installing the drivers when I rooted. I can not for the life of me figure why it wont run. I am booted into the sd card version of CWM. Do I need to mount it some way or just at the home CWM recovery screen. I have been looking for help without asking and bothering, but can't figure it out. Not a noob but totally confused. Any help would be appreciated. Thanks.
Oops! I managed to set the wrong error levels on it, I meant to do 0 and 1, I instead did 1 and 2. Anyway, uploading now.
Still no go.
I got the batch file to run but it does not finish. It starts the Deamon successfully, and it just stays at Deamon Started Succesfully. It has been there for about 45 minutes. Should I wait or can I kill it and start over. Thanks again.
Kill it reboot your machine and start over
Sent from XDA premium using my Nook Tablet
No Go
Thanks Veronica, but the reboot still does the same thing. I just started the Nook&Zergy and the device shows up so I know the drivers are proper, it just stays stuck in Deamon Started Successfully for the fix. I am out of ideas, I fear I have just bricked my first device. I have doing this since the G1, this is sad.
No no, just do:
adb push cwm_internal.img /sdcard/cwm_internal.img
adb shell
then type:
dd if=/sdcard/cwm_internal.img of=/dev/block/mmcblk0p3
First off great work Indirect. This is exactly what I was hoping that image creator would be used for, just working on other things and got preoccupied. I think you might have to do some explaining though.
One thing to note though is that CWM should not be used for any other then rooting your device. As it stands right now there is no reason to flash it to an internal partition, you will only risk messing something up, as it has no gains.
Overview:In the Nook Tablet world there is a locked bootloader, which requires that there be a Secure Chain from u-boot, to the recovery. With the exploit that bauwks discovered and designed, we are able to flash custom recoveries on to the device. However a recovery must be packed.
Packing Structure:There are two ways that we have been able to go about getting around the boot loader, the internal method requires that we use the second U-Boot, with a 256k buffer and then attache the recovery after the buffer.
(0-m bytes) ------> (m-256k bytes) ------> (256k-n bytes)
Bauwks ntBoot Buffer nemiths CWM
The trick is that that 256kth byte must contain the header for the CWM, and this is vital. If that is lost, or something on Bauwks didnt get flashed right, you will enter a boot loop.
FAQ:
What Is a 'broken recovery' NT?
A broken recovery Nook Tablet is one where either the NT's internal recovery structure was not writen correctly or one where the NT's internal recovery structure is missing bauwks boot.
How can I tell if I have a 'broken recovery'?
Assuming you have not messed with any other partitions if you do either the N + pwr method, or the 8 false boots, you should see it open the BN recovery. If your device constantly turns on and off after one of these two methods, then you have a broken recovery partition.
My Nook just continues to boot into the recovery whats this?
Aha now that is not a 'broken recovery' and is actually quite fixable. In the nook Tablet there are two files that relate to the booting structure, aka the selection of where to boot from. These lie on a partition called bootdata, and are named BCB and BootCnt. If you are running stock on your internal partition, just let the stock recovery run, and it will solve your problem. If you are running CWM, you will have to use the following commands,
Code:
adb shell mount -t vfat /dev/block/mmcblk0p6 /data
adb shell dd if=/dev/zero of=/data/BCB bs=1 count=1088
adb shell dd if=/dev/zero of=/data/BootCnt bs=1 count=1
adb reboot
Aaa this is confusing can't I just put the stock recovery on my NT?
Sure. Hopefully indirect will make a script soon, or I will make one tonight that will put the default recovery img back. If you are feeling lucky you can do the following while on CMW.
NOTE: I AM NOT RESPONSIBLE FOR ANY DAMAGES YOU CAUSE TO YOUR DEVICE. One false move and you will brick your device. HIGHLY UNRECOMMENDED
Code:
adb push recovery.img /data (this is the recovery from the 1.4.0 or 1.4.1 update zip)
adb dd if=/data/recovery.img /dev/block/mmcblk0p3 (THIS LINE IS [COLOR="Red"]EXTREMELY DANGEROUS[/COLOR]. It should only be done as a last resort, and you should only do it if you are willing to take full responsibility.)
Dead End.
I am going to start from the beginning. I flashed CWM using this app and the hit reboot into recovery from the app as well. Went to the cardboard box. I can reboot into CWM using the sd card method but can get no further. I have been trying the fix for two days and cant get it to work. Indirect gave me some ADB commands but I cant get ADB to work either. I have been on this for 2 days and cannot get it going. I really do not know what else to do. I am not a Noob and i know I have the proper drivers, the fix gets stuck though, and with the tablet in CWM from the sd card I just cant get ADB to work. I do not know if maybe because of usb debugging not being checked off, but again I can not boot up to Android, just to recovery from sd card. If I take out the sd card with CWM it boots to the cardboard box, then to black screen, and there it stays. I checked the thread for the app and people are still having this problem. I really do not know what to do. I have followed every instruction I have found or has been given to me, to the t, nothing.
UPDATE - I deleted the sdk and everything that had to do with Android from my pc. Reinstalled drivers using the method in the root thread that is pinned. I ran NOOK&ZURGY just to see my device appear in list of adb devices, which it did. It gave me my serial and it said recovery. I then redownloaded the sdk and did not download the Drivers from SDK manager. I am not sure but that seems to be the key here, to get rid of google drivers that can be downloaded from SDK manager. I then opened a command prompt, adb devices and bam there it was. I used the commands posted by LogLud above my post under "My nook just continues to boot into the recovery, what is this?". ADB Reboot and ****ing worked. THANKS TO INDIRECT, LOGLUD, and LAVERO.BURGOS. Your patience and help is greatly appreciated. I have never really asked for this much help before on XDA, and you guys were on the money, Thank You, Thank You, Thank You. Please PM me so that I can get you guys and girls beers. I will try to figure out how on my own anyways, but you guys deserve a contribution for taking the time out of your day to help me and others. Anyone with this issue and is having problems fixing, please post here or shoot me a PM and I will gladly give you all I can. Thank you again to all and happy flashing.
Benblanko81 said:
I am going to start from the beginning. I flashed CWM using this app and the hit reboot into recovery from the app as well. Went to the cardboard box. I can reboot into CWM using the sd card method but can get no further. I have been trying the fix for two days and cant get it to work. Indirect gave me some ADB commands but I cant get ADB to work either. I have been on this for 2 days and cannot get it going. I really do not know what else to do. I am not a Noob and i know I have the proper drivers, the fix gets stuck though, and with the tablet in CWM from the sd card I just cant get ADB to work. I do not know if maybe because of usb debugging not being checked off, but again I can not boot up to Android, just to recovery from sd card. If I take out the sd card with CWM it boots to the cardboard box, then to black screen, and there it stays. I checked the thread for the app and people are still having this problem. I really do not know what to do. I have followed every instruction I have found or has been given to me, to the t, nothing.
UPDATE - I deleted the sdk and everything that had to do with Android from my pc. Reinstalled drivers using the method in the root thread that is pinned. I ran NOOK&ZURGY just to see my device appear in list of adb devices, which it did. It gave me my serial and it said recovery. I then redownloaded the sdk and did not download the Drivers from SDK manager. I am not sure but that seems to be the key here, to get rid of google drivers that can be downloaded from SDK manager. I then opened a command prompt, adb devices and bam there it was. I used the commands posted by LogLud above my post under "My nook just continues to boot into the recovery, what is this?". ADB Reboot and ****ing worked. THANKS TO INDIRECT, LOGLUD, and LAVERO.BURGOS. Your patience and help is greatly appreciated. I have never really asked for this much help before on XDA, and you guys were on the money, Thank You, Thank You, Thank You. Please PM me so that I can get you guys and girls beers. I will try to figure out how on my own anyways, but you guys deserve a contribution for taking the time out of your day to help me and others. Anyone with this issue and is having problems fixing, please post here or shoot me a PM and I will gladly give you all I can. Thank you again to all and happy flashing.
Click to expand...
Click to collapse
Oh well you should had started your first post by saying im using SDK and you will have it fixed faster. SDK is not needed in windows, leave that for devs all the necessary stuff that you needed to root is provided in indirects permanent root thread including drivers.
Glad it worked!
~ Veronica
Please help
I used Indirects app to install CWM, it seemed to work fine, but when I tried to boot into CWM it flashes the picture of the box, then shuts off. I tried using this method to fix it, but the same thing happens.
What am I doing wrong? Please help. I'd hate to have bricked my nook.
lehite said:
I used Indirects app to install CWM, it seemed to work fine, but when I tried to boot into CWM it flashes the picture of the box, then shuts off. I tried using this method to fix it, but the same thing happens.
What am I doing wrong? Please help. I'd hate to have bricked my nook.
Click to expand...
Click to collapse
Did you try the method posted in this thread? you don't mention that , also can you boot normal if you let it or you cant? provide more info.
~ Veronica
lavero.burgos said:
Did you try the method posted in this thread? you don't mention that , also can you boot normal if you let it or you cant? provide more info.
~ Veronica
Click to expand...
Click to collapse
Sorry if I was not clear. Here is the entire process:
1. I have a rooted Nook Tablet.
2. I installed Indirect's One Click App to install CWM
3. I used that app to install CWM.
4. I attempted to boot into CWM, but it flashes the box and then shuts off
5. I came to this thread and began following the instructions to fix it, but the fist set of instructions "First, you need to be sure you install the sdcard version of the recovery, otherwise you won't be able to do this.(You need to goto this thread to install the sdcard version and follow instructions.)
6. I followed those instructions, but I still get the box image then shut down.
7. I can't boot normally or into CWM.
Let me know if you need any other information and I greatly appreciate your help.
What I really need to know is how to create the CWM sdcard on a mac. i.e. I don't have a linux machine with gparted and I can't figure out how to get something like Disk Utility to enable boot and lda flags.
Thanks!
bootable sd card with osx
Lehite, I was having the same problem, i.e. disk utility in osx couldn't do the job for me. I ended up using this method.
Download the “size agnostic” CM7 SD card installer image (v1.3 in my case), then write it to your microSD following the instructions on the before mentioned page. The writing takes a little bit without terminal telling you the progress, after 1-2 minutes it should be done.
After succesfully writing the image to your SD card copy the files from Goncezilla's SD Boot thread (here) to your SD card overwriting files if necessary and follow his further instructions.
On a reboot with the boot SD inside your nook you should get to the CWM menu after seeing the cardboard box. good luck!
I myself am also stuck at the black screen after the box and need to figure out how to get the ADB working on osx to be able to do Loglud's commands...
UPDATE: to get ADB working on osx I used this method. Since I'm not a developer I didn't download the whole SDK package from google but rather just the ADB tools from here.
I then connected the Nook to the mac while in CWM, checked if it was properly recognized but typing adb devices, and applied Loglud's adb commands. BAM! worked! Am back in android Many thanks to all for directions, especially Loglud.
Now a question to Indirect, I downloaded your package just today, while using it it verified the MD5 positively and continued flashing. Why did I get the black screen, and not the CWM?
cheers
Hello,
Here is the short story.
I have Samsung Galaxy ACE which is rooted.
Till y'day I was using CM9 Beta 8 ICS 4.0.4 and it was working well.
I installed CM10 JB for Galaxy Ace alpha1 from "hxxp://maclaw.pl/?page_id=180#comment-3642"
Now the problem is, JB doesn't have File Manager installed and I need to install TB to revert my backups.
Due to some unknown reason I am not able to access internet on my device either through GPRS or 3G connection.
I am desperately looking for a way to access my SDCARD wherein I have all my apk's which I can install however, without File Manager I am not sure how to install an apk.
I did some google search and came across topics about installing apk using Android SDK etc.. however I would not want to work on SDK as I feel its bit tedious job for me.
I also tried Android Injector however that didnt work even if I have enabled USB debugging Mode for adb + apps.
Now, I am hoping that, I can use the Terminal Emulator which is preinstalledo n my phone to install apk present on my sdcard.
However, I am not sure how to do that, It would be really appreciated if anyone can suggest the steps to install apk present on my sdcard from Terminal Emulator available on my phone.
Here are some of the screen captures
http://imageshack.us/photo/my-images/855/screenshot2012072418240.png/
http://imageshack.us/photo/my-images/52/screenshot2012072418234.png/
http://imageshack.us/photo/my-images/822/screenshot2012072418230.png/
Thanks
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
@@
hsotnas said:
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
Click to expand...
Click to collapse
Awesome guide !!!! , thanks bro !! :good::fingers-crossed:
Thank you for the guide
it works. thank you
works, thanks
hsotnas said:
Never mind...
I managed to install Astro File Manager apk from Terminal Emulator.
For those who are interested, here is what I had done.
Previously, I wasn't able to browse sdcard contents from TE,
I rebooted my phone once, fired up TE again
~Android$ su
Allow root access for TE
~Android# cd sdcard
~Android# ls ( Contents of SD card are listed ) I had copied astrofm.apk on root of SDCARD
~Android# pm install astrofm.apk
Success !
Thanks
P.S. This thread can be closed.
Click to expand...
Click to collapse
I very much appreciate the quick tutorial!
However, with that being said, I am having an issue trying to install my .apk onto my Motorola Xoom (Rooted running CM10.1) through the use of Terminal Emulator. I first tried installing the .apk from my File Manager and just clicking on the icon, and clicking Install, like one would think one should be able to do. When that method failed, multiple times(kept saying "insufficient storage, please delete files through app manager") which by the way, I know for a fact I have 15.8GB of storage left on my Xoom, so this should not be the issue. I then decided to try and install through Terminal Emulator. Now one would think it would be about the same as using adb commands on a Computer, which it somewhat is I guess you could say. So I go to T.E. and type the commands to get Super User access, then cd sdcard to go into the directory, then cd download because this is where my file is located, then I type pm install ****.apk.
I get a line of command that says: a) pkg: ****.apk and then b) Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE], and then the command line just goes back to my download folder directory.
I've had this issue before on my Galaxy S3, but can't remember how I ended up resolving the issue. Think I did a factory data reset/wipe, which I don't want to have to do to my Xoom. So any assistance would be much appreciated. I do understand that your device was a Galaxy ACE, but I wouldn't think it would matter as to what the device is, since it is the same install method/command for any Android device essentially. Hope someone can help out. If not, I may have to post in another Device Thread (Motorola Stingray Xoom I would assume).
Many thanks in advance, and I will click the Thank You, if any responses come through.
Really appreciate for the guide man
Sent from my LG-P700 using xda app-developers app
Thanks for the reply... short, to the point, and it works.
DannyShane said:
I very much appreciate the quick tutorial!
However, with that being said, I am having an issue trying to install my .apk onto my Motorola Xoom (Rooted running CM10.1) through the use of Terminal Emulator. I first tried installing the .apk from my File Manager and just clicking on the icon, and clicking Install, like one would think one should be able to do. When that method failed, multiple times(kept saying "insufficient storage, please delete files through app manager") which by the way, I know for a fact I have 15.8GB of storage left on my Xoom, so this should not be the issue. I then decided to try and install through Terminal Emulator. Now one would think it would be about the same as using adb commands on a Computer, which it somewhat is I guess you could say. So I go to T.E. and type the commands to get Super User access, then cd sdcard to go into the directory, then cd download because this is where my file is located, then I type pm install ****.apk.
I get a line of command that says: a) pkg: ****.apk and then b) Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE], and then the command line just goes back to my download folder directory.
I've had this issue before on my Galaxy S3, but can't remember how I ended up resolving the issue. Think I did a factory data reset/wipe, which I don't want to have to do to my Xoom. So any assistance would be much appreciated. I do understand that your device was a Galaxy ACE, but I wouldn't think it would matter as to what the device is, since it is the same install method/command for any Android device essentially. Hope someone can help out. If not, I may have to post in another Device Thread (Motorola Stingray Xoom I would assume).
Many thanks in advance, and I will click the Thank You, if any responses come through.
Click to expand...
Click to collapse
Hi DannyShane,
Not sure if this is still relevant and you are around here, since it's been a very long time and I stopped using Android
I am not an Android geek but here are my 2 cents...
You need to keep .apk file on the root of the SD CARD instead of a folder. IIRC, I had the same exact error which you had mentioned, I was trying to install .apk which was placed in a folder and it didnt work., then I had to move the .apk file to root and it worked flawlessly.
Extremely sorry for the very late response though. I use my secondary e-mail for this forum and missed replies on this thread.
@ All others who have replied, I am glad that, my little finding helped you guys.
Cheers :angel:
I have a few things to add to hsotnas answer. The insufficent space error seems to be a very generic error on android that can have various causes. Maybe there is something like this in the android source code:
PHP:
try{
installApk();
} catch (Exception ex){
output("Failure [INSTALL_FAILED_INSUFFICIENT_STORAGE]");
}
If you understand what I mean
I had this error myself a few days ago and for me it was caused by some left over files in the /data/app-lib directory. It was a self-developed application and I added a library to this directory manually. As I uninstalled the application, it wasn't removed and the reinstall failed with the above mentioned error. So make sure the directories /data/data/app.package.name/ and /data/app-lib/app.package.name/ are empty.
I tried this, to install the play store apk. But I get the error INSTALL_FAILED_INVALID_URI. What is this error refering to?
PSV_Supporter said:
I tried this, to install the play store apk. But I get the error INSTALL_FAILED_INVALID_URI. What is this error refering to?
Click to expand...
Click to collapse
Me too same thing happens when I try to install 3.apk
the command used is "pm install apps/*.apk"
Mine are backups of play store
Thankyou for this tutorial... IT WORKS.. Can't believe it.. You made my day. Thankyou :good:
I'm trying to recover an old tablet and need to install a file manager... the touch screen inst working so I thought terminal would do the job... but .APK's dont show when I go to the root of the SD card and type 'ls'
An ideas?
Thanks it works
failed on me ..
OK so the goal is to get a CM10 nightly build on my Asus transformer prime
What i have done so far is unlock the device via downloading the Asus utility to my prime, that seems to have worked fine.
Here is where i think everything went wrong,
I installed sparkyroot on my prime, it seems to have worked fine but when installing superuser app i see "su file does not exist or have correct permissions" but i went and installed the app anyway.
Now im stuck at rom manager app on my asus, when i open the app i get "you must root your phone for rom manger to function" superuser was not found at /system/bin/su...." .
I obviously didn't root properly.
when i try and press flash clockworkmod touch i simply get "an error occurred while trying to run privileged commands"
I messed up can someone please give me clear and noob friendly instructions on how to get to my end goal of CM10 from where i am PLLZZZZZ
shaneZ95 said:
OK so the goal is to get a CM10 nightly build on my Asus transformer prime
What i have done so far is unlock the device via downloading the Asus utility to my prime, that seems to have worked fine.
Here is where i think everything went wrong,
I installed sparkyroot on my prime, it seems to have worked fine but when installing superuser app i see "su file does not exist or have correct permissions" but i went and installed the app anyway.
Now im stuck at rom manager app on my asus, when i open the app i get "you must root your phone for rom manger to function" superuser was not found at /system/bin/su...." .
I obviously didn't root properly.
when i try and press flash clockworkmod touch i simply get "an error occurred while trying to run privileged commands"
I messed up can someone please give me clear and noob friendly instructions on how to get to my end goal of CM10 from where i am PLLZZZZZ
Click to expand...
Click to collapse
I suggest you go here first http://forum.xda-developers.com/showthread.php?t=1426502 download and install naked drivers
Then go here http://forum.xda-developers.com/showthread.php?t=1774352 download and unzip nvflash
Then go here http://forum.xda-developers.com/showthread.php?t=1615990 download twrp and place it inside the nvflashpack directory where you see adb.exe
Then go here http://forum.xda-developers.com/showthread.php?t=1782413 download EOS 3
or
Go here http://rootzwiki.com/topic/32357-rombaked-tf201-blackbean-2-8-15/ and download bakedbean 2
Put either one in the nvflashpack directory where adb.exe is or if you have an external sdcard, load a rom onto it (preferred method)
I am not a fan of cm10 though it has some nice features I wouldn't start with it...
Now the hard part....
Go here and follow the instructions http://androidroot.mobi/t3_nvflash/
As per the instructions put your prime in fastboot mode...
to you start a command prompt, open the nvflashpack directory where adb.exe is. Press and hold shift while rightclicking in the window, select open command prompt here
When the instructions say to enter a command, highlight it on the webpage and copy then in your command window right click and paste (control V does not work here)
Work your way all the way to the end until you see coming soon...
In the end you will have the modofied bootloader required for the lastest version of twrp (cwm doesn't work as well as twrp on the prime)
Now follow the instructions to install twrp this can be done through fastboot or through goo manager (download from market if you want to go the goo manager route)
Once that is complete with the prime still plugged into the pc, boot into twrp, now depending on if you have put the rom on an external sd card or not... if on sdcard, have it inserted before going into twrp, and install the rom from the card otherwise you can adb push the rom to the prime it will be adb push /name of rom.zip/ sdcard Note that the rom has to be in the same directory as adb.exe for this to work otherwise you need to type the path....for the name of the rom I suggest right clicking the file, go to properties and copy the name, then right click and paste in the command window... this eliminates mistakes.. and don't forget the.zip part.. the push will take about 5 minutes...
Then install the rom from twrp.....
No need to root as all custom roms are rooted... if your not comfortable with this, do lots more reading.....if something goes wrong you know the drill... I am not responsible.. blah blah blah...
Good luck!!!!!