Related
Hello,
You are probably reading this because you are having an issue after installing zdzihu's freex10 - beta 4 ROM, that is, you have no network service (you can't make any calls).
I am opening this thread to address this issue, and open up discussion on how to fix this. I have been searching threads for a whole week now, and still have not been able to fix this issue.
I have tried EVERYTHING: opening an adb shell and issuing the "killall servicemanager" command. As well have tried different installation methods.
I have also tried manually entering Roger's APN (access point name), but it won't save....
Everything is working perfectly after the installation (wifi, camera, gps, apps all work) except I can't get any service.
Phone Specs:
Model Number: X10a
Firmware: 2.1-update1
Baseband Version: 2.0.46
Kernel: 2.6.29 ([email protected]#1)
Build Number: 2.0.A.0.504
Carrier: Rogers
UPDATE: I have fixed the problem and currently running freex10 beta 4 with full service. This is how i did it, very simple and easy actually. If you are having the No Service problem, simply do this:
Connect your X10 to SUES (Sony Ericsson Suit)
Repair your device by following the instructions on SEUS
Once you've done that, then go back and get your root access, xrecovery, and do exactly what it says to do on the freex10 thread.
After you've successfully updates to 2.2 again, everything should be working!
If you have any more questions, please ask me, because I have tried everything and finally found it. Good Luck.
J
im not sure mate but maybe it have something to do whit your baseband? try flashing the latest baseband .55
all baseband needed is provided in the following link :
http://forum.xda-developers.com/showthread.php?t=960527
hope it helps
Can anyone read? This thread is here every day ugh... The first page of every rom tells you what to do
shahkam said:
im not sure mate but maybe it have something to do whit your baseband? try flashing the latest baseband .55
all baseband needed is provided in the following link :
http://forum.xda-developers.com/showthread.php?t=960527
hope it helps
Click to expand...
Click to collapse
Hey, I just took a quick look at the link you posted and this seems like it might work. Big thanks bro. I'll give it a try tonight and post the results.
J
hello,
I tried everything everything, and even what you wrote above, I still have no service, I don't even want to switch to another rom any more, I want the stock , I just want the service to get back to work, any ideas please?
A.J said:
hello,
I tried everything everything, and even what you wrote above, I still have no service, I don't even want to switch to another rom any more, I want the stock , I just want the service to get back to work, any ideas please?
Click to expand...
Click to collapse
Hey A.J,
I haven't used this phone in a while, I've switched to a SGSII. But I found a site that may be able to help you.
http://www.technipages.com/sony-ericsson-xperia-x10-hard-reset.html
Just read all of the instructions first, make sure you have all the software you need, and hopefully it will work for you!
EDIT: I recommend trying option 2 on that site I linked above. I remember that always worked for me whenever I needed to restore back to factory default.
Best of luck,
J
thanks for the fast replay mate, I know this topic started a year ago, but I'm still facing this problem haha, my phone working perfectly, except for the network service, I re-installed the stock rom, but still the same I can't use any network....
A.J said:
thanks for the fast replay mate, I know this topic started a year ago, but I'm still facing this problem haha, my phone working perfectly, except for the network service, I re-installed the stock rom, but still the same I can't use any network....
Click to expand...
Click to collapse
It's cool. I'll try to help you as much as I can.
I found another site that may be able to help you. It seems pretty easy and legit.
http://www.hard-reset.com/sony-ericsson-xperia-x10-hard-reset.html
Just make sure you have PC Companion installed on your computer.
P.S. This will wipe everything on your phone (apps, contacts, everything), but not your SD card.
Oh, and another question. Why do you want to use freex10 anyways? isn't there something else better out there atm? give Cyanogen Mod a try if you can find a stable version!
Let me know if it works.
Sorry bro, didn't work out... the phone working great, but the no network or service same problem, I'm on the stock rom and everything stock but no service, ... and about free-x I don't mind any rom haha, I just wanna see service, thank you so much for your help and for your time, I don't wanna bother you in case you don't have time or some thing bro
A.J said:
Sorry bro, didn't work out... the phone working great, but the no network or service same problem, I'm on the stock rom and everything stock but no service, ... and about free-x I don't mind any rom haha, I just wanna see service, thank you so much for your help and for your time, I don't wanna bother you in case you don't have time or some thing bro
Click to expand...
Click to collapse
Ah, no worries. I got time.
in the meantime, to better help you out, could you please supply me with more information about your phone?
Kernel
baseband
Build
android version
model number
(all can be found in about phone)
Thanks
hi
Bass_Amphetamine said:
Ah, no worries. I got time.
in the meantime, to better help you out, could you please supply me with more information about your phone?
Kernel
baseband
Build
android version
model number
(all can be found in about phone)
Thanks
Click to expand...
Click to collapse
Did you find a fix to this please?
i'am having a no service proplem how do i connect to SEUS(Sony Ericsson suit)
Bass_Amphetamine said:
Hello,
You are probably reading this because you are having an issue after installing zdzihu's freex10 - beta 4 ROM, that is, you have no network service (you can't make any calls).
I am opening this thread to address this issue, and open up discussion on how to fix this. I have been searching threads for a whole week now, and still have not been able to fix this issue.
I have tried EVERYTHING: opening an adb shell and issuing the "killall servicemanager" command. As well have tried different installation methods.
I have also tried manually entering Roger's APN (access point name), but it won't save....
Everything is working perfectly after the installation (wifi, camera, gps, apps all work) except I can't get any service.
Phone Specs:
Model Number: X10a
Firmware: 2.1-update1
Baseband Version: 2.0.46
Kernel: 2.6.29 ([email protected]#1)
Build Number: 2.0.A.0.504
Carrier: Rogers
UPDATE: I have fixed the problem and currently running freex10 beta 4 with full service. This is how i did it, very simple and easy actually. If you are having the No Service problem, simply do this:
Connect your X10 to SUES (Sony Ericsson Suit)
Repair your device by following the instructions on SEUS
Once you've done that, then go back and get your root access, xrecovery, and do exactly what it says to do on the freex10 thread.
After you've successfully updates to 2.2 again, everything should be working!
If you have any more questions, please ask me, because I have tried everything and finally found it. Good Luck.
J
Click to expand...
Click to collapse
how 2 connect to SUES
I've look and haven't found a definitive answer for this issue! I have an AT&T Xperia X10a, and i had to go back to the original rom q few days ago. SO right no i'm sitting with a 2.1 and can't for the life of me figure out how to get Xrecovery to work!! I've tried everything i could find, but nothing works. The installer wont install and i'm totally out of ideas. The kicker is that I've done this before and it's wasn't this difficult!!
Can someone please help me update to 2.2 and get Xrecovery installed on my phone????!!!!! PLEASE!!!
Thanks!
if u are on rooted 2.1,u can install xrecovery from flash tool, just a single click.!!
trevorhorton30 said:
I've look and haven't found a definitive answer for this issue! I have an AT&T Xperia X10a, and i had to go back to the original rom q few days ago. SO right no i'm sitting with a 2.1 and can't for the life of me figure out how to get Xrecovery to work!! I've tried everything i could find, but nothing works. The installer wont install and i'm totally out of ideas. The kicker is that I've done this before and it's wasn't this difficult!!
Can someone please help me update to 2.2 and get Xrecovery installed on my phone????!!!!! PLEASE!!!
Thanks!
Click to expand...
Click to collapse
You need to root your OS, then u can install Xrecovery.
Here are full tutorial >>>>> http://forum.xda-developers.com/showthread.php?t=920746&highlight=flash+tool+v0.2.8.0
Glad I can help.
Good Morning everyone (or afternoon or night)!
Yesterday i flashed CM7 for the first time ever (Never flashed nothing before, except TWRP which i did it like 2 days ago.). Flashed it through TWRP Recovery and had a problem but solved it (froze on CM7 Logo). But this morning i noticed i had another problem, no GSM! When i flashed it and booted into system i found it wierd that it didnt ask me for my PIN but i was waaaaay to sleepy to think about it. But thats not all, as I found that i didnt had GSM, I also noticed that i didnt have my SIM contacts listed.
So if any of you could help me with this i would really appreciate it, as i really need my GSM working!
Any kind of help is welcome! Even if it means Flashing another ROM. Just really need my GSM working for now!
- http://forum.xda-developers.com/showthread.php?t=946354 <-- Where i downloaded CM7
- Before CM7 i had the 2.3.3 official update
PS: Yesterday when i had that freezing problem at CM7 Logo i flashed the patch mik mentioned on the FAQ's (see "Q: I flashed rom and GSM don't works. What's to do?"). It says that would fix that freezing problem and also would fix the no GSM problem but it didnt!
Thank you all in advance for all the help you might give!
Palmaaa said:
Good Morning everyone (or afternoon or night)!
Yesterday i flashed CM7 for the first time ever (Never flashed nothing before, except TWRP which i did it like 2 days ago.). Flashed it through TWRP Recovery and had a problem but solved it (froze on CM7 Logo). But this morning i noticed i had another problem, no GSM! When i flashed it and booted into system i found it wierd that it didnt ask me for my PIN but i was waaaaay to sleepy to think about it. But thats not all, as I found that i didnt had GSM, I also noticed that i didnt have my SIM contacts listed.
So if any of you could help me with this i would really appreciate it, as i really need my GSM working!
Any kind of help is welcome! Even if it means Flashing another ROM. Just really need my GSM working for now!
- http://forum.xda-developers.com/showthread.php?t=946354 <-- Where i downloaded CM7
- Before CM7 i had the 2.3.3 official update
PS: Yesterday when i had that freezing problem at CM7 Logo i flashed the patch mik mentioned on the FAQ's (see "Q: I flashed rom and GSM don't works. What's to do?"). It says that would fix that freezing problem and also would fix the no GSM problem but it didnt!
Thank you all in advance for all the help you might give!
Click to expand...
Click to collapse
U need to flash the old baseband, the guide is lying around here somewhere
Sent from my LG-P500 using XDA App
terratrix said:
U need to flash the old baseband, the guide is lying around here somewhere
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Could you be kind and provide me the link? i tried to search for it but i couldnt find it! (kinda hard to do it now too cause im at work :s)
Palmaaa said:
Could you be kind and provide me the link? i tried to search for it but i couldnt find it! (kinda hard to do it now too cause im at work :s)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1217504
Sent from my LG-P500 using XDA App
at another thread, u mention that u running v20c or wateva which is related to official GB rom
so please downgrade ur baseband by using terratrix given link
good luck
kinda screwed as i cant install LG drivers here at work and i really need the GSM working \: should have brought my laptop! ohh well, appreciate the help you guys are doing! hope i can get this working as soon as i get home! :s
Palmaaa said:
kinda screwed as i cant install LG drivers here at work and i really need the GSM working \: should have brought my laptop! ohh well, appreciate the help you guys are doing! hope i can get this working as soon as i get home! :s
Click to expand...
Click to collapse
haha well good luck on downgrading baseband
Well no use :s i downgraded the baseband but nothing happened! I've searched a bit but found nothing! So could anyone provide me a tutorial to restore my old stock ROM? would be great if anyone did that!
Kinda desperate to have the GSM working so i would like to Restore to my old official froyo update, just till i get time to flash another rom again but this time with GSM and all ehehe
Hopefully you guys can help me out here!
Thank you very much in advance!
Palmaaa said:
Well no use :s i downgraded the baseband but nothing happened! I've searched a bit but found nothing! So could anyone provide me a tutorial to restore my old stock ROM? would be great if anyone did that!
Kinda desperate to have the GSM working so i would like to Restore to my old official froyo update, just till i get time to flash another rom again but this time with GSM and all ehehe
Hopefully you guys can help me out here!
Thank you very much in advance!
Click to expand...
Click to collapse
You can restore something only if you backed it up. So if you made a backup of your old ROM go into recovery and hit restore. If not either flash a .zip ROM or use KDZ.
Good and bad news guys! i restored my 2.3.3 stock ROM and managed to get GSM again.(had to downgrade the baseband for 2.3.3 stock), that is the good thing!
The bad thing(not that bad i think i can manage to get it ) is that i wanted to flash a custom ROM but im not sure if i should do it because i thought CM7 was one of the best ROM's to flash and i was amazed by it at first! But that GSM thingy got me a bit mad and a bit insecure about doing it again. I wouldnt get mad and would have kept the ROM if i had solved the GSM problem but i didnt!
Any suggestions of what i should do? Any ROM's suggestions? (preferably with that awesomeee CRT off animation [yeah every one loves it!])
Ill wait for your replies! thank you very much for everything you done to help!
Palmaaa said:
Good and bad news guys! i restored my 2.3.3 stock ROM and managed to get GSM again.(had to downgrade the baseband for 2.3.3 stock), that is the good thing!
The bad thing(not that bad i think i can manage to get it ) is that i wanted to flash a custom ROM but im not sure if i should do it because i thought CM7 was one of the best ROM's to flash and i was amazed by it at first! But that GSM thingy got me a bit mad and a bit insecure about doing it again. I wouldnt get mad and would have kept the ROM if i had solved the GSM problem but i didnt!
Any suggestions of what i should do? Any ROM's suggestions? (preferably with that awesomeee CRT off animation [yeah every one loves it!])
Ill wait for your replies! thank you very much for everything you done to help!
Click to expand...
Click to collapse
If u want to have CM7 by Mik you have to downgrade your baseband. Short way is using KDZ to flash old version of firmaware (v10a or similiar), then ROOT, install custom recovery and then flash CM7.
Well the only experience i have at rooting was by rooting my p500 with 2.3.3 official with superoneclick! I dont really know how to downgrade the firmware and root it on froyo! But if anyone could provide the way to do that i would really appreciate it!
Btw im sry if im asking too much, but i prefer the opinion and help of a more experienced person than just me finding something and boom! Bricked! But i also search even if i ask you guys something!
Thank you very much for your help!
Palmaaa said:
Well the only experience i have at rooting was by rooting my p500 with 2.3.3 official with superoneclick! I dont really know how to downgrade the firmware and root it on froyo! But if anyone could provide the way to do that i would really appreciate it!
Btw im sry if im asking too much, but i prefer the opinion and help of a more experienced person than just me finding something and boom! Bricked! But i also search even if i ask you guys something!
Thank you very much for your help!
Click to expand...
Click to collapse
--> http://forum.xda-developers.com/showthread.php?t=1149530
Read the entire guide, step by step!!!... Anyway it is pretty straightforward
BTW, remember to first install lg drivers on your pc... connect the phone via usb and disable LGE Virtual Modem drivers from device manager on windows,, --> this is extremely important to succeed!
My phone is ok again TakamineSubasa! i just needed an opinion on which ROM should i flash! I've done that guide and it went well! (for the 2.3.3 version! i think i messed up and used P500-v20G-baseband for CM7 [wrong one] and should have used P500-v10E-baseband). But ofc a stable ROM that doesnt have GSM problems :s
btw i was really disappointed with CM7 (or i just dont know nothing about it!). I used it all day (even though i had GSM) and i had no messaging widget, no market, and other things i dont remenber! If i flash it again is there a way to have those apps and widgets like normal stock ROM has?
Thank you very much for the help!
Palmaaa said:
My phone is ok again TakamineSubasa! i just needed an opinion on which ROM should i flash! I've done that guide and it went well! (for the 2.3.3 version! i think i messed up and used P500-v20G-baseband for CM7 [wrong one] and should have used P500-v10E-baseband). But ofc a stable ROM that doesnt have GSM problems :s
btw i was really disappointed with CM7 (or i just dont know nothing about it!). I used it all day (even though i had GSM) and i had no messaging widget, no market, and other things i dont remenber! If i flash it again is there a way to have those apps and widgets like normal stock ROM has?
Thank you very much for the help!
Click to expand...
Click to collapse
No market? U forgot a flash gapps. Other Widgets I dun think so.
Sent from my LG-P500 using XDA App
Yep, as terratrix, you must flash gapps in order to get the market on your phone and install everything you want....
Concerning abt stock widgets, CM7 does not include any stock lg crap... although you can install them later if you want, there are posts on how to install stock **** again but dunno where they are ...
btw, --> here you have the lastest gapps available: http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
for your security, flash this zip with Zip Signature Verification on in TWRP, to ensure that everything its going to be perfect
Thank you very much guys! ill probably flash sonygen but not sure yet! Need some opinions! if anyone is willing to give some i would appreciate!
Thanks for all the help!
Sonygen is pretty nice and fast. It's a themed cm7, so if you like the SE style go ahead and flash it.
Sent from my HTC Sensation Z710e using Tapatalk
Awesome news! i decided to flash CM7 again! Did the tutorial terratrix provided right after i flashed it and GSM is working perfectly! (just dont know why i had to import my contacts to the phone! Aparentely CM7 doesnt read contacts that are in the SIM card! No biggie!)
Thank you so much for every help you provided guys!
Loving this forum!
I would like to ask for some ideas what could possibly cause my problem with flashing one particular kernel.
Here`s my starting point:
1. I know what I`m doing, I`m comfortable with flashing custom kernels & roms, that means my bootloader is unlocked etc... /talking about U20i/
2. I` ve done extensive search on this forum and elsewhere
3. I went through SEUS update
4. I`ve got latest flashtool, but tried also older versions, tried on various PCs
5. There`s only this one .ftf in the firmware folder
5. I` ve got the right kernel file, triple-checked that, re-re-downloaded, md5
matches, nobody else reported this problem
When I try to flash it with flashtool, it gives me this error line:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase"
After that, I can flash ANY other kernel w/o problems.
Questions:
1. Is there anybody with the same problem?
Talking about this: http://www.mediafire.com/?ish1obpr8mtxdh6 , but you could possibly have the problem with other kernels too
2. Is there a possibility that my boot partition is somehow corrupted?
3. Is there a way to check for that and make some repair?
4. Am I loosing my mind? /I am, no need to answer to this,
thank you /
i also had this problem on my X8 when flash kernel Alfs CM8, but when i tried Kernel nAa, it is succes
drfr said:
I would like to ask for some ideas what could possibly cause my problem with flashing one particular kernel.
Here`s my starting point:
1. I know what I`m doing, I`m comfortable with flashing custom kernels & roms, that means my bootloader is unlocked etc... /talking about U20i/
2. I` ve done extensive search on this forum and elsewhere
3. I went through SEUS update
4. I`ve got latest flashtool, but tried also older versions, tried on various PCs
5. There`s only this one .ftf in the firmware folder
5. I` ve got the right kernel file, triple-checked that, re-re-downloaded, md5
matches, nobody else reported this problem
When I try to flash it with flashtool, it gives me this error line:
ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Failed to init erase"
After that, I can flash ANY other kernel w/o problems.
Questions:
1. Is there anybody with the same problem?
Talking about this: http://www.mediafire.com/?ish1obpr8mtxdh6 , but you could possibly have the problem with other kernels too
2. Is there a possibility that my boot partition is somehow corrupted?
3. Is there a way to check for that and make some repair?
4. Am I loosing my mind? /I am, no need to answer to this,
thank you /
Click to expand...
Click to collapse
I guess u want an ISC kernel (nAa kernel) for an nAa's MiniCM9...
try this buddy
Naa released an new version of his ics kernel. Take a look to this site
http://forum.xda-developers.com/showthread.php?t=1636504
This iss U20_naa_ics_02
I hope my post helped you good luck
Thank you all. I'm using nAa's ics kernel and miniCM9 since the day it was released for our devices, so the above problem doesn't really matter no more. But the question remains - how such thing as described could possibly happen at all, when everybody else had no such problem with the same kernel and I am dead sure I had the right one and did everything I should. Well, **** happens and it's not always possible to explain why, obviously.
Sent from my U20i using xda premium
drfr said:
Thank you all. I'm using nAa's ics kernel and miniCM9 since the day it was released for our devices, so the above problem doesn't really matter no more. But the question remains - how such thing as described could possibly happen at all, when everybody else had no such problem with the same kernel and I am dead sure I had the right one and did everything I should. Well, **** happens and it's not always possible to explain why, obviously.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Seriously? Since the day it was released for your phone.. While you could not flash the kernel? Why didn't you say it had worked or something like that and close this thread as solved?
SmG67 said:
Seriously? Since the day it was released for your phone.. While you could not flash the kernel? Why didn't you say it had worked or something like that and close this thread as solved?
Click to expand...
Click to collapse
I can see I'm being misunderstood. The problem I described doesn't get solved if I flash OTHER kernel. The question remains the same: how could that thing happen at all? OK, I don't need that kernel mentioned in OP anymore, but still I hoped I could hear from people whether they hadn't experienced such things with other kernels and what could be possible solution. This would be useful if somedy in the future will search forums for help, don't you think?
Sent from my U20i using xda premium
Ah, you managed to flash the ICS2 kernel instead of ICS1, is that right?
I guess sometimes things fail for some reason, it seems this was a random bug that not many people experienced.
Have fun anyway with your new Rom, glad it worked out in the end.
SmG67 said:
Ah, you managed to flash the ICS2 kernel instead of ICS1, is that right?
I guess sometimes things fail for some reason, it seems this was a random bug that not many people experienced.
Have fun anyway with your new Rom, glad it worked out in the end.
Click to expand...
Click to collapse
As you say, for some reason - I hoped somebody could try to explain the nature of the actual reason. As nobody did, we can conclude it was, as you say, a random bug and close this thread, OK.
Hi Xda, I recently picked out my old x10i to fix it for a friend who needs a phone and wanted to install a rom and to make this fast and simple, i totally messed it up using flash tool i think, i cant tell my than the screenshot i attached to this post, i Hope you guys can help me out~
-Moon
Moonystorm said:
Hi Xda, I recently picked out my old x10i to fix it for a friend who needs a phone and wanted to install a rom and to make this fast and simple, i totally messed it up using flash tool i think, i cant tell my than the screenshot i attached to this post, i Hope you guys can help me out~
-Moon
Click to expand...
Click to collapse
is the phone turning on? I think you only get that error when your trying to flash a custom kernel with a locked Bootloader. try flashing stock kernel and you should be fine. try this guide too:http://forum.xda-developers.com/showthread.php?t=1821750
Moonystorm said:
Hi Xda, I recently picked out my old x10i to fix it for a friend who needs a phone and wanted to install a rom and to make this fast and simple, i totally messed it up using flash tool i think, i cant tell my than the screenshot i attached to this post, i Hope you guys can help me out~
-Moon
Click to expand...
Click to collapse
Hmm, I would try SEUS.
kind of,
*2nd edit* Nothing, not a single thing wants to work, ill just dump it and get another one for my friend.
*edit* No, i couldnt get it to work. Ill try another version of flashtool. the newest one.-
Yes the unit powers up just fine. i also got it to flash the 2.1 Package using flashtool. that one worked out just fine. Ill update it from 2.1 to 2.3.3 using sues and check the BL status. Lets hope i get it saved