Latest 2.1.1.A.0.6 SE firmware (zip file) to install with xRecovery, can someone put here the download link.
Thanks.
Yes same here..need it too
Nobody?
Thanks
Just change your build.prop and update.
Sent from my U20i
datagubben said:
Just change your build.prop and update.
Sent from my U20i
Click to expand...
Click to collapse
The problem is..i cant connect to the computer with usb..so i cant update to the new update..any way for fixing my problem..
datagubben said:
Just change your build.prop and update.
Sent from my U20i
Click to expand...
Click to collapse
And not lose the root and the xrecovery?
Have you tried pressing charging first then bring down notification bar and mount? The usb should work now!
Sent from my U20i
Done..nothing still cnt connect
datagubben said:
Just change your build.prop and update.
Sent from my U20i
Click to expand...
Click to collapse
How to change build prop? Any quick small guide please?
sorry for spamming, this post is just in the way for reach the number "10" that allows me to post where i'm interested to.
best regards!
respect
kintas said:
Latest 2.1.1.A.0.6 SE firmware (zip file) to install with xRecovery, can someone put here the download link.
Thanks.
Click to expand...
Click to collapse
unless you use flashtool and a prerooted version of .6 you are not going to have much joy... there is a way to flash all the files except system.sin (so you don't lose root xrecovery) then boot into xrecovery and install a prerooted inc xrecovery system.sin (as an update.zip)
I am sure someone has already released such a file on here by now (there were .24 versions floating around when that was released)
but the easiest way is just update with SEUS (you will lose root and xrecovery, JIT etc but you will keep your apps and other data) then just root it again and re install xrecovery and JIT.
if thats too hard (or if you can't use SEUS or pc companion) then just download the .6 firmware and use flashtool to flash it (you will need to root it and install xrecovery etc again.. and all your software (I suggest using SE back up and restore for all your contacts, sms's etc and titanium backup for your apps)
Kiwi
Related
Hi guys, here's the latest firmware by SE. Since it's not possible to root it with any known method, I prepared update.zip to be flashed with xRecovery
The firmware comes pre-rooted, with busybox and xRecovery pre-installed.
You need rooted 2.1 rom with xRecovery working to install this firmware!
If you already flashed the latest firmware with SEUS, please downgrade OR root it using THIS thread.
1. Download and unpack the file. It contains 2 files: update.zip and 2.0.2.A.0.24_for_X10-flasher.tar.bz2
2. Copy update.zip to SD Card
3. Boot into xRecovery and install update.zip
4. Turn off phone / remove battery
5. Unpack the 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash the SIN files with X10-flasher
6. Enjoy!
Make sure you understand the installation process before you try!
Download: 2.0.2.A.0.24-rooted-zdz.tar.bz2
If you don't have loader.sin, please find it here (thanks pedrocel85)
Enable JIT v2: http://forum.xda-developers.com/showpost.php?p=10058308&postcount=1
Cheers!
zdzihu
Maybe get JIT pre-installed?
Wow, that was fast solution !
Thanks zdzihu !
can someone please help me.
Ive download the file attached and got x10flasher too but i dont understand step 5. Where do i get that file?
Hi there.
Is there any images of this firmware?
Is ir all working?
Sent from my X10i using XDA App
soldiers33 said:
can someone please help me.
Ive download the file attached and got x10flasher too but i dont understand step 5. Where do i get that file?
Click to expand...
Click to collapse
Where exactly on the OP did you see anything about the x10flasher!??
It says F O R x R E C O V E R Y...!!
Read the post carefully , follow the steps to the letter , its idiot proof , you CAN'T mess this up!
Mr_Element said:
Where exactly on the OP did you see anything about the x10flasher!??
It says F O R x R E C O V E R Y...!!
Read the post carefully , follow the steps to the letter , its idiot proof , you CAN'T mess this up!
Click to expand...
Click to collapse
I'm guessing he saw it here;
'5. Unpack of 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash it using with X10-flasher'
Hey guy first of all I wish a Merry Christmas to all this amazing XDA community....
In topic: I'm assuming that the improvements of this new release are related to the /system folder so could it be possible to flash this new version and after that do a restore of my backup of the /data folder only using xrecovery?? It's just a thought so I don't loose my apps and stuff and I will not have to re do my titanium back up all over again.....
Jim
Sent from my X10i
jimbo77 said:
Hey guy first of all I wish a Merry Christmas to all this amazing XDA community....
In topic: I'm assuming that the improvements of this new release are related to the /system folder so could it be possible to flash this new version and after that do a restore of my backup of the /data folder only using xrecovery?? It's just a thought so I don't loose my apps and stuff and I will not have to re do my titanium back up all over again.....
Jim
Sent from my X10i
Click to expand...
Click to collapse
There is also a new kernel and baseband (see step 5). To be honest, restoring backup with xRecovery will work, but I'd also recommend backing up with Titanium (to be 100% safe).
ok so ive figured it out but the files dont have a loader.sin so i cant continue with the flasher!!!!
zdzihu said:
There is also a new kernel and baseband (see step 5). To be honest, restoring backup with xRecovery will work, but I'd also recommend backing up with Titanium (to be 100% safe).
Click to expand...
Click to collapse
Ok thanks a lot sir... I will try and post later with results...
Jim
superleeds27 said:
I'm guessing he saw it here;
'5. Unpack of 2.0.2.A.0.24_for_X10-flasher.tar.bz2 and flash it using with X10-flasher'
Click to expand...
Click to collapse
Yep. That line has me a tad confused too.
That means that zip can be flashed just by booting into xRecovery, and of one doesn't have xRecovery, then they can simply extract the files and flash using the Flash Tool - right?
yea im also confused by step 5.
Is it possible to install JIT?
If yes, I might try it soon.
I cant install xrecovery, already have the latest FW force closes, assuming it needs root already to install?
Flo95 said:
Is it possible to install JIT?
If yes, I might try it soon.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=885977
go3asy said:
I cant install xrecovery, already have the latest FW force closes, assuming it needs root already to install?
Click to expand...
Click to collapse
Correct ^
Cheers,
z
any other options, pone isnt found with x10 flasher in flash mode but fine in SEUS, so cant even get back to generic old 2.1
Probably stupid question, sorry if it is (had no experience in recovery before), but if I install this FW, would my apps/settings remain, or will it make my phone cleared?
I'd lile to know that, too.
hi zdzihu.
please help me :
http://forum.xda-developers.com/showthread.php?t=885973
I have updated my X10 mobile recently to 2.0.2.A.0.24 using SEUS.
After the upgrade I am not able to root my handset.
Can you please help me to root it.
thanks,
Gaurav
u need to downgrade and after use the firware update pre-rooted. you install the firware with recovery.
boromkeurgui said:
u need to downgrade and after use the firware update pre-rooted. you install the firware with recovery.
Click to expand...
Click to collapse
i have the same problem too... downgrade mean flash it back to 1.6?? then only flash back to 2.1 ??
i cant really flash it with latest firmware???
the firmware i downloaded is 2.1_2.0.2.A.0.24_GENERIC
i have no idea how to downgrade, i never do it but check this : http://forum.xda-developers.com/showthread.php?t=885956
edvin89 said:
i have the same problem too... downgrade mean flash it back to 1.6?? then only flash back to 2.1 ??
i cant really flash it with latest firmware???
the firmware i downloaded is 2.1_2.0.2.A.0.24_GENERIC
Click to expand...
Click to collapse
No not back to 1.6, just the first 2.1. When you have done that root it like usual and then flash the modified update that is pre-rooted.
Hope you have backups? When you get your phone right create a backup with xrecovery, it makes things so much easier.
Sent from my X10i using XDA App
Flash with THIS, install THIS, then THIS, done.
XperiaX10iUser said:
Flash with THIS, install THIS, then THIS, done.
Click to expand...
Click to collapse
Hey XperiaX10iUser,
I'm sure you know about the new update for X10a. Seeing that you've worked with Z, do you have any insider info on if/when/where there will be a rooted xRecovery method to update and also for your ROM? If you do one for X10a, would you consider using 1234-4836? It has voice search stock. Seeing that we aren't getting Froyo or Gingerbread, and google voice search is 2.2 in Market/app brain.
Sent from my X10a using XDA App
edvin89 said:
i have the same problem too... downgrade mean flash it back to 1.6?? then only flash back to 2.1 ??
i cant really flash it with latest firmware???
the firmware i downloaded is 2.1_2.0.2.A.0.24_GENERIC
Click to expand...
Click to collapse
you can downgrade it to 2.1 version also.No need to downgrade to 1.6..
try this link.. maybe u will able to downgrade it sucessfully..
http://forum.xda-developers.com/showthread.php?t=825675
I am just doing it right now..
will update once i m done.
I am in urgent need to root my handset as I have to use some Java applications..
gosh.. what was I thinking when I updated it to latest s/w... crap...
XperiaX10iUser said:
Flash with THIS, install THIS, then THIS, done.
Click to expand...
Click to collapse
Lord Takyon said:
No not back to 1.6, just the first 2.1. When you have done that root it like usual and then flash the modified update that is pre-rooted.
Hope you have backups? When you get your phone right create a backup with xrecovery, it makes things so much easier.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thanks for the info.... i able to flash it to 2.0.A.0.504..
and installed the z4root and rooted with permanent root...
installed busybox v1.17.1 , superuser and allow permision for z4root, busybox, xrecovery...
in xrecovery installer... i able to install... all the 3 file shown tick...
problem now is i cant boot into xrecovery when i switch on the phone and press back few times....it just hang there... need remove battery...
any solution for this??? thanks in advance...
edvin89 said:
thanks for the info.... i able to flash it to 2.0.A.0.504..
and installed the z4root and rooted with permanent root...
installed busybox v1.17.1 , superuser and allow permision for z4root, busybox, xrecovery...
in xrecovery installer... i able to install... all the 3 file shown tick...
problem now is i cant boot into xrecovery when i switch on the phone and press back few times....it just hang there... need remove battery...
any solution for this??? thanks in advance...
Click to expand...
Click to collapse
Try following the manual installation instructions. It worked for me.
- copy these 3 files into /system/bin using root explorer
may i know what is root explorer ??
i copy it SD card there.. right?? no need put inside to any folder, right ??
Hi All,
Finally I was able to downgrade it to 504...installed the Z4root and super user..
Now I am having problem in installing the jar files into my handset..
can someone share me the procedure to install the jar files...
thanks
//Gaurav
gsmgaurav said:
Hi All,
Finally I was able to downgrade it to 504...installed the Z4root and super user..
Now I am having problem in installing the jar files into my handset..
can someone share me the procedure to install the jar files...
thanks
//Gaurav
Click to expand...
Click to collapse
Did you try letting xRecovery install them for you first? Once xRecovery apk is installed on your phone go into your app drawer and open xRecovery and click install. Will get 3green check marks and done.
Install manually: You need to get Root Explorer from Market and set to R/W to get write permissions to copy jar files from sdcard and to destination folder.
Sent from my X10a using XDA App
Hi guys, It may sound silly but i generally have no clue about it, Is there any other way to update my x10's baseband without connecting to a computer? like via SD card? i only ask as my charger port has failed on my phone.. and am waiting to send that off in the next few weeks to get repaired
Thanks
Stevon said:
Hi guys, It may sound silly but i generally have no clue about it, Is there any other way to update my x10's baseband without connecting to a computer? like via SD card? i only ask as my charger port has failed on my phone.. and am waiting to send that off in the next few weeks to get repaired
Thanks
Click to expand...
Click to collapse
If you have Xrecovery, you could pre-load your sdcard with whatever zip files you wanted by directly attaching it, sdcard, to your pc.
No, which is why Bin4ry didn't use xRecovery...
Bin4ry said:
Download latest flashtool here:
http://forum.xda-developers.com/showthread.php?p=10738467
Extract the Dualtouch.rar from here:
http://www.multiupload.com/K97IO1FTAR
Mirror:
http://dl.dropbox.com/u/17170888/Dualtouch.rar
FTF-File for Flashtool Version 0.2.4 or higher:
http://www-stud.uni-due.de/~sfanmakr/X10Flash/X10_1.0_Bin4ry_Dualtouch.ftf
Copy this File into the firmwares folder directly!
and copy the "Dualtouch" Folder inside the Firmwares Folder of Flashtool.
After that just flash and reboot =)
If the Rom is capable of Dual-/Multitouch you will have it now.
Regards
Bin4ry
NOTE:
This will just ADD dualtouch feature to your ROM. It will not wipe userdata or something else, see it as an addon =)
If you having problems in stock Rom with Multitouch follow this guide: (thanks My_Immortal)
http://forum.xda-developers.com/showthread.php?t=921302
Click to expand...
Click to collapse
You can use 2 methods for Dualtouch.
#1 FlashTool
#2 xRecovery
XperiaX10iUser said:
No, which is why Bin4ry didn't use xRecovery...
Click to expand...
Click to collapse
This,
http://forum.xda-developers.com/showthread.php?t=936462&highlight=2.1.A.0.435+xrecovery
is the link for 435 for xrecovery.
Wouldn't that work?
The kernel can't be flashed with xRecovery, which as already stated is why you need to use the flash tool.
Sent from my X10i using XDA App
XperiaX10iUser said:
The kernel can't be flashed with xRecovery, which as already stated is why you need to use the flash tool.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks, missed that nuance. Explains some problems I've had.
i dont want open a new thread for my question so i aks here
a few days ago i updated my phone with SEUS to 2.1.A.0.435 rom and 2.1.54 kernel
and there was pinch-to-zoom activated...
but i wanted the freex10 beta4 and flashed it on my phone...
now ther is no mediascape and i dont know if the pinchtozoom feature only works in this or if its gone...
can you tell me whats going on?
(sorry if i wrote something wrong my english isnt the best... )
BlackWodka said:
i dont want open a new thread for my question so i aks here
a few days ago i updated my phone with SEUS to 2.1.A.0.435 rom and 2.1.54 kernel
and there was pinch-to-zoom activated...
but i wanted the freex10 beta4 and flashed it on my phone...
now ther is no mediascape and i dont know if the pinchtozoom feature only works in this or if its gone...
can you tell me whats going on?
(sorry if i wrote something wrong my english isnt the best... )
Click to expand...
Click to collapse
There is no mediascape or other sony bloat ware on beta 4.. If you already had dual touch you wouldn't have lost it by flashing beta 4, that isn't possible.have you tried it in gallery or in the browser?
fiscidtox said:
There is no mediascape or other sony bloat ware on beta 4.. If you already had dual touch you wouldn't have lost it by flashing beta 4, that isn't possible.have you tried it in gallery or in the browser?
Click to expand...
Click to collapse
i know that...
and yes the dual touch isnt lost it works in every app... but the pinch-to-zoom is away.. except it realy worked only in mediascape... sad...
pinch to zoom does work though, that is the point of my whole post. Try it in the browser or gallery..... :S
somehow it wont work for me..
Sent from my xperia using XDA App
Is there anychance that someone could uplaod the 2.0.46 baseband for flashtool as i restored the stock SE 2.1 and it justs reboots after the sony graphics i think its cause i it doesnt work with the new 2.1.54 baseband thanks
Reinstall your firmware.
BlackWodka said:
somehow it wont work for me..
Sent from my xperia using XDA App
Click to expand...
Click to collapse
Theblackfleet said:
Is there anychance that someone could uplaod the 2.0.46 baseband for flashtool as i restored the stock SE 2.1 and it justs reboots after the sony graphics i think its cause i it doesnt work with the new 2.1.54 baseband thanks
Click to expand...
Click to collapse
Use SEUS to get fresh firmware, then flash 2.1.A.0.435 for MT, search for HOWTO.
ok will it go back down to the 2.0.46 baseband then?
Theblackfleet said:
ok will it go back down to the 2.0.46 baseband then?
Click to expand...
Click to collapse
Depends on your operator
about bundeling files in flashtool for changig baseband
deleted- sorry wrong thread
Model Number
X10a
Firmware Version
2.1 Update1
Baseband Version
2.1.55
Kernal version
2.6.29
[email protected]#1
Build Number
2.1.1.A.0.6
I was using Free X10 Beta 4 and was missing my HD Camcorder,so I used the option repair through SEUS and got the latest firmware which is .55.
Then I used the XDA flash Tool
http://www.multiupload.com/Q2NRGI76JR
Connect the phone(make sure USB Debugging is Enabled,DO NOT mount Sd Card),then click root.
Congratulation's you should now have root access
You can also install XRecovery using the flash tool,click advanced then select install XRecovery.
Download Busybox from the market,not the one in the flash tool.
If this helped ya,Click Thanks
superbrowndude said:
Model Number
X10a
Firmware Version
2.1 Update1
Baseband Version
2.1.55
Kernal version
2.6.29
[email protected]#1
Build Number
2.1.1.A.0.6
I was using Free X10 Beta 4 and was missing my HD Camcorder,so I used the option repair through SEUS and got the latest firmware which is .55.
Then I used the XDA flash Tool
http://www.multiupload.com/Q2NRGI76JR
Connect the phone(make sure USB Debugging is Enabled,DO NOT mount Sd Card),then click root.
Congratulation's you should now have root access
You can also install XRecovery using the flash tool,click advanced then select install XRecovery.
Download Busybox from the market,not the one in the flash tool.
If this helped ya,Click Thanks
Click to expand...
Click to collapse
wow this is great news!
never saw that anywhere...thks
gotta love that flash tool is there anything it cant do?
xepter said:
gotta love that flash tool is there anything it cant do?
Click to expand...
Click to collapse
for now? bread.
but will see
LOL
xepter said:
gotta love that flash tool is there anything it cant do?
Click to expand...
Click to collapse
Can't say much, but there is some more cool features coming in the next version.
Im Running FreeX10 beta4 and wanted to be able to switch between the latest 2.1 anf 2.2.1(freeX10)
So this is what i did
0. created a backup in xrecovery of my FreeX10 op
1. flashed 2.1.1.A.0.6 Rogers X10a and rooted it with Flashtools 0.3
2. Used Flashtools to install busybox and xrecovery via the customize button(placed apps in the flashtools apps folder) turned on the phone
3. ran busybox and pressed install(updates new busybox needed for xrevovery)
4. ran xrecovery from phone ,it installs perfectly
5. Had to manually enter my APNs since the Rogers rom didnt have any preconfigured for Optus3g
6. rebooted phone in xrecovery mode and created backup!
Now i can switch between 2.1 and freeX10 2.2 anytime
Thats what I did to,Now I switch from SE 2.1/CM 6.1.3. Cant go wrong with it only taking 5minutes to switch between Roms
rendeiro2005 said:
for now? bread.
but will see
LOL
Click to expand...
Click to collapse
ahhh but it can do gingerbread...
I just installed the Jit v2 complier using xRecovery on my 2.1.1.A.0.6 x10a... works great.
WHt is the difference between .55 to .54?? is there a need to upgrade mine to .55? sorry i am kinda new to this thing thnks for the post!
It enables multi touch to work with all applications,also suppose to make the phone faster. I think there was tweaks made to mediascape and timescape,so they run smoother.
thank you, i have been trying to root for a week. that did it.
do you know the differences between all the basebands? i have tried 54 and 58... i noticed that the signal strength is better with 58. i'm not really sure if that's what it is for.
Would anyone be kind enough to upload the SEUS or decrypted firmware files to use with the FlashTool for the new 2.1.1.A.0.6 update? updating through SEUS is no good for me so I need to flash using Bin4ary's Flashtool.
So anyone, Please? I could even donate a little for your effort
M4rL0nV said:
Would anyone be kind enough to upload the SEUS or decrypted firmware files to use with the FlashTool for the new 2.1.1.A.0.6 update? updating through SEUS is no good for me so I need to flash using Bin4ary's Flashtool.
So anyone, Please? I could even donate a little for your effort
Click to expand...
Click to collapse
hey see this link http://tinyurl.com/48ttw33
then select x10 mini pro 2.1 incl. flash tool
google is your friend
PTGamer said:
hey see this link http://tinyurl.com/48ttw33
then select x10 mini pro 2.1 incl. flash tool
google is your friend
Click to expand...
Click to collapse
Very funny I'm asking for the specific 2.1.1.A.0.6 update, that thread is old and the downloads included are for an old firmware, believe me I actually FLASHED my phone to 2.1 using the UK provided in that thread. I suggest you read the title and the OP before trolling
M4rL0nV said:
Very funny I'm asking for the specific 2.1.1.A.0.6 update, that thread is old and the downloads included are for an old firmware, believe me I actually FLASHED my phone to 2.1 using the UK provided in that thread. I suggest you read the title and the OP before trolling
Click to expand...
Click to collapse
in that thread the FW is the 2.1 and the kernel versions that comes with that update is the 2.1.1.A.0.6....
im not understanding what you mean
btw why you dont use seus? seus is the easy way...
PTGamer said:
in that thread the FW is the 2.1 and the kernel versions that comes with that update is the 2.1.1.A.0.6....
im not understanding what you mean
btw why you dont use seus? seus is the easy way...
Click to expand...
Click to collapse
What I'm saying is that flashing with any firmware in that thread gives me a 2.0.A.0.504 build but I need de 2.1.1.A.0.6 to install CM Floyo, unless I'm doing something wrong? maybe you could help me . Updating through SEUS won't work for me, for some unknown reason after running the update service my phone keeps asking me for a Network Unlock Code rendering it useless as an actual phone lol
So the FlashTool is my last hope I guess :/ Anyone?
You can either use the xRecovery, then make a restore on 2.1.1.A.0.6 firmware from xrecovery.
litemint said:
You can either use the xRecovery, then make a restore on 2.1.1.A.0.6 firmware from xrecovery.
Click to expand...
Click to collapse
Didn't think of that... I'll try it out and see what happens
No luck... I even tried decrypting SEUS files myself but I still keep running into the same issue with the 'Unlock Code' meh, I give up.
Would anyone PLEASE upload the decrypted files for a U20a with the 2.1.1.A.0.6 firmware?
I've installed FW 2.1.1.A.0.6 on my u20a and it is now showing U20i and 3g not working... CM6 is working like a charm but NO 3G! Now i'm trying to figure out how to make my 3g work Ideas?
Edit: Downgraded firmware to U20a again (older version) and now I have 3G working on CM6 but now I'm afraid about instability. 1 hour up and everything is ok. No reboots yet.
It shouldn't give you any problems, I'm pretty much running on the same setup without any glitches (so far).
Sent from my X10minipro using Tapatalk