19/058/2011 08:58:19 - INFO - <- This level is successfully initialized
19/058/2011 08:58:20 - INFO - Starting adb service
19/058/2011 08:58:30 - INFO - Searching Adb Device
19/058/2011 08:58:30 - INFO - Device connected
19/058/2011 08:58:30 - INFO - Pushing .\custom\root\busybox to /data/local/tmp/busybox
19/058/2011 08:58:31 - INFO - Running busyhelper
19/058/2011 08:58:31 - INFO - Pushing .\custom\root\givmeroot.tar to /data/local/tmp/
19/058/2011 08:58:31 - INFO - Running part1 of Root Exploit, please wait
19/058/2011 08:58:31 - INFO - Running rootit
19/058/2011 08:58:41 - INFO - Running part2 of Root Exploit
19/058/2011 08:58:41 - INFO - Running rootit2
19/058/2011 08:58:45 - INFO - Finished!.
19/058/2011 08:58:45 - INFO - Root should be available after reboot!
19/059/2011 08:59:47 - WARN - Please check your Phone and 'ALLOW' Superuseraccess!
19/059/2011 08:59:50 - INFO - Root Access Allowed
19/059/2011 08:59:58 - INFO - Installing xRecovery to device...
19/059/2011 08:59:58 - INFO - Searching Adb Device
19/059/2011 08:59:59 - INFO - Device connected
19/059/2011 08:59:59 - INFO - Remounting system read-write
19/059/2011 08:59:59 - INFO - Pushing .\custom\xRecovery\xrecovery.tar to /sdcard/xrecovtmp/xrecovery.tar
19/000/2011 09:00:00 - INFO - Pushing .\custom\xRecovery\chargemon to /sdcard/xrecovtmp/chargemon
19/000/2011 09:00:00 - INFO - Running installrecovery as root thru sysrun
19/000/2011 09:00:00 - INFO - xRecovery successfully installed
I flash it with flash tools. The first time i successfully enter the xrecovery, however, when i reflash with flash tool (literally giving it a hard reset), it cannot enter again. I even use sues to reflash it for safety, whats going on?
did you open the installed xrecovery app in your phone?
open it, click install located at the top of screen then when you see 3 checks beside the 3files (busybox,chargemon,xrecovery) then you're good to go.
reboot when you see "sony ericsson" at the start up, press back (maybe a couple of times to make sure it will access xrecovery)
additional info: i read in zdzihu's thread that install busybox(from the market) first before installing xrecovery.
elajnel said:
did you open the installed xrecovery app in your phone?
open it, click install located at the top of screen then when you see 3 checks beside the 3files (busybox,chargemon,xrecovery) then you're good to go.
reboot when you see "sony ericsson" at the start up, press back (maybe a couple of times to make sure it will access xrecovery)
additional info: i read in zdzihu's thread that install busybox(from the market) first before installing xrecovery.
Click to expand...
Click to collapse
I try it manually or using the flash tool by BnA, every time the apps said ok to go, but it doesn't work when i keep pushing my back button hard...........what the heck its going on here? T.T
lghost1213 said:
I try it manually or using the flash tool by BnA, every time the apps said ok to go, but it doesn't work when i keep pushing my back button hard...........what the heck its going on here? T.T
Click to expand...
Click to collapse
try uninstalling the xrecovery app, delete the busybox, chargemon, xrecovery files in /system/bin. install busybox from market, wait til it says done. then install xrecovery again.
elajnel said:
try uninstalling the xrecovery app, delete the busybox, chargemon, xrecovery files in /system/bin. install busybox from market, wait til it says done. then install xrecovery again.
Click to expand...
Click to collapse
Thx for the help, problem solve by reusing your previous method.
I found out the flash tool's xrecovery and buzybox are quite outdated, i think i too depend on flash tool. After i install the latest version of buzybox at market and reinstall the ZDzihu xrecovery, everything goes fine, and i manage restore my backup again.
lghost1213 said:
Thx for the help, problem solve by reusing your previous method.
I found out the flash tool's xrecovery and buzybox are quite outdated, i think i too depend on flash tool. After i install the latest version of buzybox at market and reinstall the ZDzihu xrecovery, everything goes fine, and i manage restore my backup again.
Click to expand...
Click to collapse
haha. that's great! glad to help.
elajnel said:
haha. that's great! glad to help.
Click to expand...
Click to collapse
Hello I'm having the same problem too and I also followed your instructions... But in my case, I still can't go on Xrecovery. Would you have any advice for me?
Related
I have xperia x10 mini manufacturing date 10w40
Can i unlock my bootloader??
Please answer only if you are sure cause i dont wana brick my phone
Also tell me the easiest method to unlock my bootloader..
Or can i use any Rom on 2.3 without unlocking bootloader??
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
SmG67 said:
Yes you can, your manufacturing date is week 40 of 2010, the warnings only go out for manufacturing dates from week 29 in 2011.
The easiest way to unlock your bootloader is from the plugins-menu in flashtool.
You can still lose your radio-capability if your simlock-certificate is not recognised in S1Tool, but you can relock the bootloader with the Restore-button in S1Tool and your radio-capability SHOULD come back.
If you unlock your bootloader, boot the phone on stock firmware first and check for network connectivity, if your network is gone/sim not recognised, relock your bootloader. If everything works as it should you can go and flash custom kernels and roms.
Click to expand...
Click to collapse
I'm getting Blue coloured Error "CANCELLED"
Why?
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
SmG67 said:
I don't know... maybe you could post the output from the identify button in S1Tool and the output from flashtool when you get that error, maybe that tells me a bit more of what is going wrong
Click to expand...
Click to collapse
See here http://imageshack.us/photo/my-images/204/35480731.png/
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
SmG67 said:
The text is unreadable that way but i think at the bottom it says SEMC Simlock certificate? you should be ok then.
Please copy the text from flashtool when you choose the unlock-bootloader option from the plugins-menu and paste it here
Click to expand...
Click to collapse
18/000/2012 20:00:15 - INFO - <- This level is successfully initialized
18/000/2012 20:00:15 - INFO - Flashtool Version 0.7.1.0 built on 2012-05-01 22:07:23
18/000/2012 20:00:15 - INFO - You can drag and drop ftf files here to start flashing them
18/000/2012 20:00:21 - INFO - Device connected with USB debugging on
18/000/2012 20:00:22 - INFO - Connected device : E10
18/000/2012 20:00:22 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:22 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:22 - INFO - Root Access Allowed
18/000/2012 20:00:35 - INFO - Device disconnected
18/000/2012 20:00:46 - INFO - Device connected with USB debugging on
18/000/2012 20:00:47 - INFO - Connected device : E10
18/000/2012 20:00:47 - INFO - Installed version of busybox : N/A
18/000/2012 20:00:47 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
18/000/2012 20:00:47 - INFO - Root Access Allowed
18/000/2012 20:00:53 - INFO - Please connect your device into flashmode.
18/000/2012 20:00:57 - INFO - Device disconnected
18/001/2012 20:01:27 - INFO - Device connected in flash mode
18/001/2012 20:01:28 - INFO - Opening device for R/W
18/001/2012 20:01:28 - INFO - Reading device information
18/001/2012 20:01:28 - INFO - Phone ready for flashmode operations.
18/001/2012 20:01:28 - INFO - Flashing loader
18/001/2012 20:01:28 - INFO - Ending flash session
18/001/2012 20:01:28 - WARN - Cancelled
18/001/2012 20:01:28 - INFO - Device connected in flash mode
18/001/2012 20:01:29 - INFO - Device disconnected
18/001/2012 20:01:32 - INFO - Device connected in flash mode
18/001/2012 20:01:35 - INFO - Device disconnected
Install busybox with flashtool, reboot your phone and try again
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
ok thanks wait don't go anywhere please i'm doing.
piousheart said:
ok thanks wait don't go anywhere please i'm doing.
Click to expand...
Click to collapse
lol i have to go to work in a few minutes, i'll check back later, but i think you'll be fine now (although i'm not entirely sure)
No success
What to do now? please help
SmG67 said:
Install busybox with flashtool, reboot your phone and try again
Click to expand...
Click to collapse
Thanks!! I did it with manual method and. . .BoOM bootloader is unlocked.!!
Please confirm the following things.
1.Currently i'm on Built No-2.0.A.0.504,can i flash latest Latest 2.1.1.A.0.6 with unlocked bootloader?
2.Will nAa kernel will work with the stock 2.1.1.A.0.6 firmware (i will flash stock 2.1.1.A.0.6 firmware and then nAa kernel because i want to use miniCM 7)
Give rating to miniCM7 x\5
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
SmG67 said:
If you still got network reception then you're ok
You could have flashed the 2.1.1.a.0.6 firmware with a locked bootloader too, so with an unlocked bootloader that shouldn't be a problem
You can flash the nAa-11 kernel for Gingerbread roms, but your phone won't boot, you have to go into CWM after flashing the kernel, and install MiniCM7 from your sd-card, so copy that first before you flash the Kernel.
Make sure you make a backup in CWM first,, then do a wipe data/factory-reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery stats, then back into the main menu and install zip from sd-card. select the MiniCM7 zip you copied and wait for it to finish.
Reboot your system, if it takes longer than 5 minutes to start up, press home and power buttons simultaneously, you'll get a restart, enter CWM again and do all the wipes again, it should work after that.
Click to expand...
Click to collapse
Process Started...wish me luck.!!
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
piousheart said:
Bro please provide me a link for 2.1.1.A.0.6 firmware for my E10i please..
I searched but failed..and by mistake i flashed another firmware and the phone is bricked so now again on 2.0.A.0.504
Click to expand...
Click to collapse
SE don't like to see their firmware all over the internet, that's why all the links are dead.
SmG67 said:
SE don't like to see their firmware all over the internet, that's why all the links are dead, check your inbox
Click to expand...
Click to collapse
Thanks a ton for the link
But i download the 2.1.1.C.0.0 from some site and it worked.!!
Now going one step further..!!
Installed MiniCM 7 but now SD card not dected..
What to do??
piousheart said:
Installed MiniCM 7 but now SD card not dected..
What to do??
Click to expand...
Click to collapse
How is it not detected? by the phone itself?
Boot back into CWM and Wipe everything (wipe data/facotory reset, wipe cache, wipe dalvik-cache), and reboot see if that helps
In storage there is option to unmount SD card so phone is detecting SD card.
When i use Camera,gallery etc it says SD card not present
I tried factory reset,cache,delvic cache...but not working!!
but file manager like root explorer is working and sowing contents of SD card
i have mini pro x10 and after i unlock the bootloader and the root and install recovery i still dont the access to the recovery mode can u help me plzz
I don't know the combination mind however have you done the correct combination? Also if not then try re-flashing the recovery
Sent from my GT-I9100 using XDA
Tested more than one recovery, but i still dont the access to the recovery mode
WAHIP said:
Tested more than one recovery, but i still dont the access to the recovery mode
Click to expand...
Click to collapse
I suppose you use flashtool?
Could you show us the output when you connect your phone? That might be helpful
SmG67 said:
I suppose you use flashtool?
Could you show us the output when you connect your phone? That might be helpful
Click to expand...
Click to collapse
ok
24/021/2012 17:21:16 - INFO - <- This level is successfully initialized
24/021/2012 17:21:16 - INFO - Flashtool Version 0.8.0.0 built on 2012-05-27 21:57:12
24/021/2012 17:21:16 - INFO - You can drag and drop ftf files here to start flashing them
24/021/2012 17:21:24 - INFO - Device connected with USB debugging on
24/021/2012 17:21:26 - INFO - Connected device : U20
24/021/2012 17:21:26 - INFO - Installed version of busybox : N/A
24/021/2012 17:21:26 - INFO - Android version : 2.1-update1 / kernel version : 2.6.29
24/021/2012 17:21:26 - INFO - Root Access Allowed
Install busybox, reinstall xrecovery and see if it works then.
SmG67 said:
Install busybox, reinstall xrecovery and see if it works then.
Click to expand...
Click to collapse
Yeah agreed, that should do it
Sent from my GT-I9100 using XDA
trooperjohn said:
Yeah agreed, that should do it
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
iam do this but not worked
try the command
restart recovery
in some tool like Android terminal. might boot in if you forgot the combo keys.
From AdMoBiLe!::LGP698
When USB plugin my Neo, screen goes on and if I wait 5 seconds then I can start it. But if I press and hold the Back key or the Menu key and plugin USB it doesn't go to flashmode or fastboot mode. I am not sure how it got the 0% battery problem but I can't get it to accept new kernels so I can resolve the issue.
I see they most phones go to flashmode and then is simply to write new kernel's and resolve the problem.
Please help someone if you know how I can write new kernels.
PS. Back and Menu key are working fine when using the phone.
Sent from my MT11i using Tapatalk 2
ciuc007 said:
When USB plugin my Neo, screen goes on and if I wait 5 seconds then I can start it. But if I press and hold the Back key or the Menu key and plugin USB it doesn't go to flashmode or fastboot mode. I am not sure how it got the 0% battery problem but I can't get it to accept new kernels so I can resolve the issue.
I see they most phones go to flashmode and then is simply to write new kernel's and resolve the problem.
Please help someone if you know how I can write new kernels.
PS. Back and Menu key are working fine when using the phone.
Sent from my MT11i using Tapatalk 2
Click to expand...
Click to collapse
1. Kernels are flashed in fastboot mode not flashmode.
2. Have you unlocked your bootloader?
3. Which version of recovery have you installed.
4. Which ROM/kernel are you running now?
gregbradley said:
1. Kernels are flashed in fastboot mode not flashmode.
2. Have you unlocked your bootloader?
3. Which version of recovery have you installed.
4. Which ROM/kernel are you running now?
Click to expand...
Click to collapse
THX for answer:
1-Phone doesn't go on fastboot mode
2-I dont't know but in Service info/Configuration/Rooting status: Bootloader Unlock Allowed: YES (Where can i see if the bootloaders are unlocked?)
3-No recovery installed
4: Kernel: 2.6.32.9-perf [email protected]#1 - 4.1.B.0.431 - StockRom
I have also one Neo V that i unlocked the bootloaders myself and instaled FXP CM9.1
ciuc007 said:
THX for answer:
1-Phone doesn't go on fastboot mode
2-I dont't know but in Service info/Configuration/Rooting status: Bootloader Unlock Allowed: YES (Where can i see if the bootloaders are unlocked?)
3-No recovery installed
4: Kernel: 2.6.32.9-perf [email protected]#1 - 4.1.B.0.431 - StockRom
I have also one Neo V that i unlocked the bootloaders myself and instaled FXP CM9.1
Click to expand...
Click to collapse
2. If your bootloader is unlocked you would know about it becuase you have to do it yourself.
3 and 4. You have not rooted your phone yet. I suggest you read the sticky threads in order to find out how to.
1. root phone.
2. install recovery
3. unlock bootloader (Optional, but necassary if you want to flash kernels)
4 Flash custom roms (And kernels)
First place to look is in the the very first thread in the dev section. Download flashtool and start reading the threads.
I flashed NightElf Kernel mod for ICS Beta - that suport 0% Baterry workaround and now I have a working phone again. (without ned to be pluged in all the time)
Now I can't root my device. I tried from flashtool alt 3 options: force psneuter, force zergrush and force emulator. Also tried DoomLord's solution. Noting worked for me:
09/019/2012 20:19:50 - INFO - Device connected with USB debugging on
09/019/2012 20:19:51 - INFO - Connected device : MT15
09/019/2012 20:19:51 - INFO - Installed version of busybox : N/A
09/019/2012 20:19:51 - INFO - Android version : 4.0.4 / kernel version : 2.6.32.9-v1_587
09/019/2012 20:19:58 - INFO - Pushing C:\Flashtool\.\devices\MT15\busybox\1.19.0\busybox to /data/local/tmp/busybox
09/019/2012 20:19:58 - INFO - Pushing C:\Flashtool\.\custom\root\zergrush.tar.uue to /data/local/tmp
09/019/2012 20:19:59 - INFO - Running part1 of Root Exploit, please wait
09/020/2012 20:20:01 - INFO - Waiting for device
09/020/2012 20:20:25 - ERROR - The part1 exploit did not work
09/020/2012 20:20:35 - INFO - Pushing C:\Flashtool\.\devices\MT15\busybox\1.19.0\busybox to /data/local/tmp/busybox
09/020/2012 20:20:36 - INFO - Pushing C:\Flashtool\.\custom\root\psneuter.tar.uue to /data/local/tmp
09/020/2012 20:20:36 - INFO - Running part1 of Root Exploit, please wait
09/020/2012 20:20:37 - INFO - Running rootit
09/020/2012 20:20:38 - INFO - Waiting for device
09/021/2012 20:21:38 - INFO - Forced stop waiting.
09/021/2012 20:21:39 - ERROR - The part1 exploit did not work
Any sugestions please?
If you flashed that kernel then you are rooted.
The kernel comes pre rooted.
Try entering recovery mode.
Reboot phone and press back key when you see the sony logo
I entered in recovery mode.
From here i think i will manage to install Custom Rom.
Thanks.
ciuc007 said:
I entered in recovery mode.
From here i think i will manage to install Custom Rom.
Thanks.
Click to expand...
Click to collapse
No need to say thanks, there is a button for that if you feel the need to thanks anyone. Also, if you need anymore help you can PM me.
Good luck
gregbradley said:
No need to say thanks, there is a button for that if you feel the need to thanks anyone. Also, if you need anymore help you can PM me.
Good luck
Click to expand...
Click to collapse
I have installed ICS Pureness on my Neo but i am still unable to ROOT. When opening SuperSU it ask me to update SU and than i get Installation failed.
i have Android 4.0.4, BB 72, Night-elf kenel - 2.6.32.9-v1_587, [email protected]_pureness_13.0
I have tried DoomLord V3 - ZergRush and Flashtool.
Flash tool said "You are already rooted" - but applications that require root access give me error.
(in my NeoV the pureness is rooted ok because i can run applications that require root)
Any ideas?
ciuc007 said:
I have installed ICS Pureness on my Neo but i am still unable to ROOT. When opening SuperSU it ask me to update SU and than i get Installation failed.
i have Android 4.0.4, BB 72, Night-elf kenel - 2.6.32.9-v1_587, [email protected]_pureness_13.0
I have tried DoomLord V3 - ZergRush and Flashtool.
Flash tool said "You are already rooted" - but applications that require root access give me error.
(in my NeoV the pureness is rooted ok because i can run applications that require root)
Any ideas?
Click to expand...
Click to collapse
The solution is in the pureness rom thread. Try the search button in that thread next time.
Solution.
Install superuser from play store.
Run it and click home button when you see the splash screen.
Then open supersu again, allow root rights, update su binary.
Then uninstall superuser app that you just downloaded
Hi am a galaxy ace user, my brother has a x10, he wants to install a jb rom. but i dont know if the phone has bootloader unlocked or not. so i want help.
S1 boot version has r8A033. Does that mean the boot loader is unlocked ??
can i install cwm without problems and then jb??
Lijop said:
Hi am a galaxy ace user, my brother has a x10, he wants to install a jb rom. but i dont know if the phone has bootloader unlocked or not. so i want help.
S1 boot version has r8A033. Does that mean the boot loader is unlocked ??
can i install cwm without problems and then jb??
Click to expand...
Click to collapse
Yes. R=locked and r=unlocked. Good luck with your flashing:thumbup:
Guys i really have a big problem. pls help. stuck at boot logo after installing the the 4.0 kernel from scritch. was on 2.3. installed the kernel, but stuck at boot logo. what should i do now ?
LOG
30/020/2013 16:20:45 - INFO - Selected X10_4.0.4_scritch_BootManager_v5.ftf
30/020/2013 16:20:45 - INFO - Preparing files for flashing
30/020/2013 16:20:45 - INFO - Please connect your device into flashmode.
30/020/2013 16:20:58 - INFO - Device connected with USB debugging on
30/021/2013 16:21:00 - INFO - Connected device : X10
30/021/2013 16:21:01 - INFO - Installed version of busybox : BusyBox v1.19.0.git.adrynalyne (2010-12-21 22:03:30 MST) multi-call binary.
30/021/2013 16:21:01 - INFO - Android version : 2.3.3 / kernel version : 2.6.29-00054-g5f01537 / Build number : 3.0.1.G.0.75
30/021/2013 16:21:01 - INFO - Device disconnected
30/021/2013 16:21:33 - INFO - Opening device for R/W
30/021/2013 16:21:33 - INFO - Start Flashing
30/021/2013 16:21:33 - INFO - Processing loader
30/021/2013 16:21:33 - INFO - Checking header
30/021/2013 16:21:33 - INFO - Ending flash session
Guys please help
download latest scritch cm10 kernel v21 + rom v9.5 testing from here :
http://wuala.com/CMX10-Android/Testing/?id=21,1909229,13-387,2245286,15
copy rom to sd card, flash kernel via flashtool ... when you see blue light blinks keep pressing back button to enter CWM ... then wipe data and caches and install the rom
Islam Looca said:
download latest scritch cm10 kernel v21 + rom v9.5 testing from here :
http://wuala.com/CMX10-Android/Testing/?id=21,1909229,13-387,2245286,15
copy rom to sd card, flash kernel via flashtool ... when you see blue light blinks keep pressing back button to enter CWM ... then wipe data and caches and install the rom
Click to expand...
Click to collapse
Thanks mate, saved my phone. Now on JB.
Sent from my GT-S5830 using xda premium
Hello,
I made the mistake of installing Magisk trying to deal with safetynet. Now my tablet won't root (on lineageOS) and won't boot if I flash again the patched stock boot.ini and recover the previously working stock backup. Most worrying, flashtool won't work. Can anyone help with this flashtool error?
Code:
26/019/2017 06:19:05 - INFO - Selected Bundle for Sony Xperia Z2 Tablet(SGP512). FW release : 23.5.A.1.291. Customization : VMo FR/DE/AT/CH/BE/NL/PL
26/019/2017 06:19:05 - INFO - Preparing files for flashing
26/019/2017 06:19:24 - INFO - Please connect your device into flashmode.
26/019/2017 06:19:31 - INFO - Device connected in flash mode
26/019/2017 06:19:31 - INFO - Opening device for R/W
26/019/2017 06:19:31 - INFO - Device ready for R/W.
26/019/2017 06:19:31 - INFO - Reading device information
26/019/2017 06:19:31 - INFO - Phone ready for flashmode operations.
26/019/2017 06:19:31 - INFO - Opening TA partition 2
26/019/2017 06:19:32 - INFO - Current device : Unknown: Jul 24 2016/19:28:59 - CB5126LP0H - Unknown: Jul 24 2016/19:28:59 - Unknown: Jul 24 2016/19:28:59 - GENERIC_23.5.A.1.291
26/019/2017 06:19:32 - INFO - Closing TA partition
26/019/2017 06:19:32 - INFO - Start Flashing
26/019/2017 06:19:32 - INFO - Processing loader.sin
26/019/2017 06:19:32 - INFO - Checking header
26/019/2017 06:19:32 - INFO - Flashing data
26/019/2017 06:19:33 - INFO - Loader : S1_Root_9c84 - Version : MSM8974AB_27 / Boot version : S1_Boot_MSM8074AB_LA3.0_M_3 / Bootloader status : ROOTED
26/019/2017 06:19:33 - INFO - Max packet size set to 512K
26/019/2017 06:19:33 - INFO - USB buffer size set to 512K
26/019/2017 06:19:33 - INFO - Parsing boot delivery
26/019/2017 06:19:33 - INFO - Ending flash session
26/019/2017 06:19:33 - ERROR - null
26/019/2017 06:19:33 - ERROR - Error flashing. Aborted
I'm guessing the issue is somewhat related to the "INFO - Current device : Unknown: " part of the log, anyone? I have a backup of the TA partition, if that helps.
I am having the exact same problem. I installed a Lineage OS rom and I think it had magisk pre compiled in it so that was installed too. I have tried multiple FTF's, 2 different computers (Windows 10 and 7), different drivers, usb ports. It is driving me crazy and I am still trying different things.
I am still able to install different roms, however I am getting random reboots so that is why I want to restore FTF then re flash rcstar's Lineage OS rom as recommended.
I always do full Wipes, even tried internal storage Wipe once hoping that would fix my random reboot problem, but it hasn't. Also most new roms won't even work on my tablet (Castor Windy) due to the setup crashing bug.
Edit:
Also I have used Flashtool before, successfully, on this tablet and it has worked before. But not anymore...
I have installed a 5.1.1 Rom for now and it is stable thankfully.
Install latest flashtool, it will install the room you selected no matter what kind of tft it was, make sure you selected the correct tft. and if it doesnt work, install a stock rom for the devices via TWRP, to solve the problem, I saw once who was deodexed and rooted on 6.0.1 android version flashable zip. Hope it works
kiukirimas said:
Install latest flashtool, it will install the room you selected no matter what kind of tft it was, make sure you selected the correct tft. and if it doesnt work, install a stock rom for the devices via TWRP, to solve the problem, I saw once who was deodexed and rooted on 6.0.1 android version flashable zip. Hope it works
Click to expand...
Click to collapse
Hi thanks for the reply.
I have the latest flashtool installed. Also tried different versions. It will not flash any tft no matter what. I have tried multiple including the same exact one I used before.
I haven't been able to find any flashable zips for a stock rom.
I repeat. I have used flashtool before on my tablet and it has worked. It will not work after flashing the latest 7.1.2 Lineage ROM by rcstarr. I am almost certain this is a problem with the tablet and has nothing to do with computer, drivers, files on the computer, ect.
Edit:
I guess I should also mention that I can root and flash roms no problem. And they boot just fine (other than the new 7.0+ builds that give me random reboots) I just can't use flashtool.
Edit again:
Hey OP. I found a flashable zip. I don't think its completely stock but its close. You can try flashing this and then try Flashtool if you want:
https://mega.nz/#!VcxGyRZK!U4NqLOSeg1X_3KNC1_xXm2WnH4_i2OoZ6NwuyaIR6Hw
I am staying on 5.1.1 PAC Rom unless it becomes unstable so I haven't tested it.
Crwys said:
Hi thanks for the reply.
I have the latest flashtool installed. Also tried different versions. It will not flash any tft no matter what. I have tried multiple including the same exact one I used before.
I haven't been able to find any flashable zips for a stock rom.
I repeat. I have used flashtool before on my tablet and it has worked. It will not work after flashing the latest 7.1.2 Lineage ROM by rcstarr. I am almost certain this is a problem with the tablet and has nothing to do with computer, drivers, files on the computer, ect.
Edit:
I guess I should also mention that I can root and flash roms no problem. And they boot just fine (other than the new 7.0+ builds that give me random reboots) I just can't use flashtool.
Edit again:
Hey OP. I found a flashable zip. I don't think its completely stock but its close. You can try flashing this and then try Flashtool if you want:
https://mega.nz/#!VcxGyRZK!U4NqLOSeg1X_3KNC1_xXm2WnH4_i2OoZ6NwuyaIR6Hw
I am staying on 5.1.1 PAC Rom unless it becomes unstable so I haven't tested it.
Click to expand...
Click to collapse
Ok, I have exactly the same symptoms - flashtool worked with my tablet until I installed LineageOS. I assumed it was Magisk that broke it, but could be wrong. I might try a flashable rom to see if it allows flashtool to work again. In the mean time, I'm going to try restoring the TA partition, as I had a backup done before unlocking the bootloader.
I was able to reflash and run LineageOS now, but with safetynet broken, and some instability.
Same Problems here - now im on ACIP and its for me the best rom But if i want one day back to real stock, the problem is still there... someone have any ideas?
Ok I ended up trying the flashable zip I shared and it didn't work. The file flashed successfully but was stuck in bootloop. I tried flashtool anyways but same issue.
Restoring the TA worked for me. At least flashtool is right now flashing my SGP512!
If you were prevident enough to do a TA backup, all you need is to have root on the tablet and do the following (linux, windows should be similar):
Change to the TA.img directory
Type the commands in bold as-is
adb push TA-18062016.img "/data/local/tmp/TA.img"
(replace TA-18062016.img with the name of your TA image backup)
create a file named restore.sh with the following content (adapted from the old tarestore.sh by DevShaft here):
Code:
#!/system/bin/sh
pl=`ls /dev/block/platform`
for p in $pl
do
platform=$p
break
done
tamd5=`md5sum /dev/block/platform/$platform/by-name/TA`
echo ""
echo "old TA MD5:\n$tamd5"
tamd5=`md5sum /data/local/tmp/TA.img`
echo ""
echo "TA file MD5:\n$tamd5"
dd if=/data/local/tmp/TA.img of=/dev/block/platform/$platform/by-name/TA &> /dev/null
tamd5=`md5sum /dev/block/platform/$platform/by-name/TA`
echo ""
echo "New TA MD5:\n$tamd5"
adb push "restore.sh" "/data/local/tmp/restore.sh"
adb shell "chmod 777 /data/local/tmp/restore.sh"
adb shell
su
/data/local/tmp/restore.sh
That should fix your TA and re-lock your bootloader. After that, flashtool should work again, and you'll be able to flash the stock tft
PS: my Z2 tablet just finished booting into stock ROM, showing the setup wizard now, so it works. I'll see what safetynet shows, before wiping it all again, unlocking boot, and trying LineageOS again.
Wow that's awesome. Good for you.
I don't have a TA backup or even know what that is lol. I've been on Verizon phones for quite some time now. So my Android knowledge of root, roms, ect. Is pretty limited. Hopefully I can flash a TA zip maybe?
Thanks for keeping us updated.
Crwys said:
Wow that's awesome. Good for you.
I don't have a TA backup or even know what that is lol. I've been on Verizon phones for quite some time now. So my Android knowledge of root, roms, ect. Is pretty limited. Hopefully I can flash a TA zip maybe?
Thanks for keeping us updated.
Click to expand...
Click to collapse
Check the thread I linked (here). Unfortunately, you needed to do the backup before unlocking the bootloader, and the TA is specific to your tablet....
jbbandos said:
Check the thread I linked (here). Unfortunately, you needed to do the backup before unlocking the bootloader, and the TA is specific to your tablet....
Click to expand...
Click to collapse
Well damn that sucks. Guess I'll be stuck on Pac Rom for a while then, (maybe forever Lol) at least it runs well.
Thanks again for contributing to this thread.
What a strange thing, I have been able to flash Lineage 7.1 many times on my SGP521, and always be able to get back to stock via Flashtool, I want to know if anyone having this problem owns this model of Z2 tablet, so I can be able to share the stock rom I got, flasheable by CWM.
kiukirimas said:
What a strange thing, I have been able to flash Lineage 7.1 many times on my SGP521, and always be able to get back to stock via Flashtool, I want to know if anyone having this problem owns this model of Z2 tablet, so I can be able to share the stock rom I got, flasheable by CWM.
Click to expand...
Click to collapse
I have the SGP512, but anyway, with this issue flashing stock via the recovery doesn't seem to fix it. The only way I got it to flash again with the flash tool was to recover the TA partition.
Thank you for taking an interest but i have the sgp511
Hey I got exactly the same problem with my SGP521. I installed lineageOS and after that, my tablet did random reboots every 3- 10 minutes. I got pretty annoyed by that and tried another rom. Problem still existed. So I wanted to get back to Stock Rom with the flashtool. But I get "error: null" right after I plug the tablet with Volume Down. I mean... The tablet is unusable for me, when it reboots 130 times a day.
Is there still no solution?
Flashtool 0.9.15 works well! This is solution for SGP521
Psylou said:
Hey I got exactly the same problem with my SGP521. I installed lineageOS and after that, my tablet did random reboots every 3- 10 minutes. I got pretty annoyed by that and tried another rom. Problem still existed. So I wanted to get back to Stock Rom with the flashtool. But I get "error: null" right after I plug the tablet with Volume Down. I mean... The tablet is unusable for me, when it reboots 130 times a day.
Is there still no solution?
Click to expand...
Click to collapse
Just relock your bootloader via flashtool, and install a brand new stock rom via lfashtool too.
I have the exact same problem. 2 days spent on it, I don't how to fix it.
"Parsing boot delivery” then Aborted.
SP-05F. docomo. Now even the firmware from XperiFirm.exe cannot be installed with flashtool 0.9.23.2.
All drivers setup.
I used TWRP to install AICP.
The tab now only could get in system normally, but WIFI doesn't work either.
You should try Flashtool 0.9.15. It works with my Z2 Tablet SGP521.
I have random reboots on my z2 tablet 16gb wifi only, after flashing carbon rom. Any solution ?