Hello, I upgraded using the kitchen rom to 04.00.16 ENG T-mobile. I really like this new OS, and that Voice Command program is really useful, but I have noticed a few problems that have occurred since installing it.
1) My unit freezes alot requiring a soft reset atleast 1-2 times per day.
2) I can't to seem to keep anymore then 3 programs running at one time. My xda seems to want to automatically close programs when I start opening the 3rd applications.
3) My 256MB SD storage card was spontaneously erased by my xda! And it happened twice! So I am getting pretty fed up. I have already lost alot of information and I don't want to keep doing this.
Does anyone know about these issues? I am beginning to think that 2002 isn't so bad. Atleast it doesn't erase my SD card and freeze all the time. I am trying to give 2003 one more shot so I tried installing it via the exe file, but it says "Error: Get device Data - An existing connection was forcibly closed by the remote host. Error getting device data." It also says "Cannot execute the remote communication program. Please make sure that the USB/serial cable is properly connected. " I restarted my labtop twice and did a soft reset on my xda twice as well and it still does it. And I frequently connected and disconnected the usb cable to make sure the computer recoginized it, which is has on a consistent basis. I am beginning to think that I should have just stuck with getting something stable like the special rom edition, but now I can't get this installed due to the errors I have been getting above. Can anyone help me with this? Thanks
Quang
i've had non of those issues with tmobile's 4.01.00 rom
though have a program i love which dont want to run on mw2003
Hi
I've installed Opera 10 to my storage card on my HD2 and have noticed that after dis-connecting from my PC (as a disk drive) if I try to launch Opera 10, I get the following error message:
'Opera10-armv4i' is not a valid Pocket PC application.
I have to soft reset to get it running again.
I'm on the stock 1.48 ROM.
Any help would be appreciated.
xxthemartianxx said:
Hi
I've installed Opera 10 to my storage card on my HD2 and have noticed that after dis-connecting from my PC (as a disk drive) if I try to launch Opera 10, I get the following error message:
'Opera10-armv4i' is not a valid Pocket PC application.
I have to soft reset to get it running again.
I'm on the stock 1.48 ROM.
Any help would be appreciated.
Click to expand...
Click to collapse
That's what happens when your device doesn't have access to the storage card and you try and run software installed on it. I had the exact issue earlier tonight, but it was still plugged in at the time - I was being a numpty. As soon as I unplugged it I could run the app.
I take it this issue persists with you after you unplug then? Maybe your device isn't recognising that you've unplugged the cable.
If I try to run the application (Opera) when connected to the PC, its a different message:
The file 'Opera10-armv4i' cannot be opened..........
I've also tried installing directly to the device and get the same error.
That is strange then. A bit obvious, but have you googled the error message to see if it's a common Opera 10 problem?
Yes - tried to Google but nothing!
Well I'm sorry mate, but I can't help. I'm sure someone on here will have some good ideas.
Good luck getting it sorted!
Just replicated the same error on my spare stock 1.43 ROM HD2.
How are ppl installing this cab? Directly from the SD card on the phone or via PC / Activesync?
I'd imagine via a cab. That's where I originally did it from, but I uninstalled it way back. I didn't like the lack of pinch-to-zoom that was in the earlier version, so I just dumped it.
Maybe it's a general Opera issue. It would be interesting to see if any others who have Opera 10 could reproduce the problem.
Interestingly, just connected it to my Macbook as a disk drive and the error hasn't replicated.
Strange......
im getting the same error. DL'ed a fresh copy of Opera 10 Beta 3, removed old version, deleted registry keys and reinstalled onto storage card. Been having this problem for some time now. Strange thing is, I can play my music, navigate through my storage card, and even install the .cab from the storage card, but it doesnt seem to like running Opera anymore. It ran just fine until a few weeks ago.
I had also hooked up my phone to my PC as both a storage device and Active Sync.
I have the same problem.
Installed on HTC TP2 from cab on storage card and now there is an error.
same error
I have the same error. Where any of you able to fix it? if so how? thanks in advance.
I have the same problem! I can just soft reset to get it working again.
Any other good touch browser?
Thanks
I am getting exactly the same problem. I have uninstalled it, downloaded the cab again and installed (copied cab to SD and installed onto SD).
Edit:
After some more routing around it seems that if you connect via USB as a disk drive it causes the problem. A soft reset should solve it. Connecting through Active Sync does not cause this issue. I was copying some files across last night using **** drive access mode (something I rarely do), and I started to see the error message.
Soft reset cures it (I guess until you want to connect using disk drive access again!).
I think this mostly happens when we try to open opera from home screen short cut (on Sense, SPB MS etc.). I often face this issue and when I open it from start menu it works sometimes, otherwise I have to do a soft reset.
Thanks
HELP! my HTC sense won't load, it stated that the file WifiNoStandby cannot be opened and my i can't even get the phone to connect (have done both soft and hard reset?)
the error message says try reinstalling!
Sounds like you had a cab install go bad and now sense doesn't like you anymore. If you did a hard reset that should have solved your problem... are you sure you did it correctly?
i had installed the DhillonBros CAB files for VOIP and then tried uninstalling them a few weeks back but they did n't uninstall properly....ended up installing the latest PortSip instead.
have tried to hard reset again...and now other files (like the 'CommManagerLink' file cannot be opened. Either it not signed with a trusted certificate, or one of its components cannot be found....) this happens when i try to open the Comm Manager....and similar error messages when trying to run other apps/programs
I also had problems with the Data Connection struggling to connect recently so not sure if thats related ?
I recently downloaded the newest version of Provision and I think I may need a little help since I'm very new to all of this. I just finished installing it and now I want to put my apps and music back on it. Well I plug it into my PC and my first problem occurs, I can't activate USB storage to transfer information between the two. I can find my phone and load it's data, but when I do it's just a blank page. I try adding the music and apps but it says the device either stopped responding or was disconnected. Problem two: I go to download gapps and I get a message saying "USB storage unavailable". I can't even download things onto my phone. I went to the online Google Play market and tried to download a few things and they all gave me a message saying the app/widget will begin downloading shortly, but they never did. So now I'm stuck with a phone limited to just calls and texting. Is there a step I forgot to take or is there something wrong with the ROM I installed?
I'd ask this on the original post but I'm not allowed yet.
My phone was restarting at the logo. Software was corrupted.
I downloaded the Stock Rom from XDA developers, and followed every thread that could help me install fresh rom.
First problem I faced that flashing failed at FDL2.
Then somewhere on the forum I read that unchecking the calibration option in the download tool would help. I unchecked the calibration option, and lo! it flashed.
So, new software was installed. I was happy but that happiness didn't last long.
I noticed that the new software had some problems.
1. Dialer crashed as I tried calling or someone called me. As a result, I was unable to pick a call or make a call.
2. Bluetooth was successful in pairing with any device, but it refuses to receive or send any file. When I tried to send any file, there was no option of bluetooth in sharing. And when tried to receive any file from other device, there was no movement in my phone, while the phone showed the request rejected.
3. Camera clicked photos fine, but there was no preview on the screen. That is, when I opened the camera, it showed every camera option but the screen was black, there was no image of the person standing behind it. And when I clicked the shoot button, the image shot fine.
4. Internet connects, but only the sending arrow blinked; there was no receiving. Therefore, no site opened.
5. SD card, when inserted, mounted with no problem, but I was unable to delete or copy any file from it. I could only read files from it, i.e. installing software, etc.
6. Videos when played, only sound emerged, no video, even after installing MX player.
7. There was no calender in the menu, while I checked the system.img (with the help of Greenleaf_Yaffs-IMG_Manager on pc) that it was included in the system apps, but not installed while flashing.
8. IMEI numbers were changed. Bluetooth and wireless address were changed. Also, I noticed that bluetooth share app was not installed while flashing, though it was included in the stock rom.
Of all the eight problems listed above I could only rectify the crashing dialer problem and IMEI problem.
Using VRoot, I rooted my phone and using system_app_installer I replaced the dialer from the original stock dialer that I backed up earlier. I tried to install bluetooth share, but it only showed successful installation, but it did not appear in the list of system apps. I installed it several times, but each time it installed as if a fresh app, there was no prompt for a replace, and there was no result. Similar was the case with the calender app.
I rectified the IMEI using WRITE IMEI_R1.5.3001. The IMEI were written in the back of the phone so I could write the original IMEIs but I didn't have any idea of bluetooth and wireless address.
But I couldn't find any solution to the other problems for the past 1 month. I searched all over the net, but no avail.
Now, I think this all problem has its root when I unchecked the calibration option in the download tool. If this is the case, what should I do?
Please guide, friends. Desperately need your suggestions.
Thank you.