Have anyone tried connecting to the eduroam wifi? I've tried it with 1.3d and now with 1.4. Folio detects the network but after I set it up (with right login, password and security settings) it just keeps tryin to connect.
HTC WildFire can connect to this network w/o problem so I guess it has something to do with the folio.
Do I have to do something special to get my folio to connect to eduroam? Thanks
Related
Hi,
while I was using an Ipod Touch, I always have created adhoc networks via Windows Vista Home with internet access for devices in this network.
My Ipod Touch never have had (and actually doesnt have) any problems finding and connecting to this network, but my Htc Hero doesnt even find it after I typed in SSID, password etc. manually.
am I making any mistakes or why doesnt this work?
greetings,
ben
BenBen_ said:
Hi,
while I was using an Ipod Touch, I always have created adhoc networks via Windows Vista Home with internet access for devices in this network.
My Ipod Touch never have had (and actually doesnt have) any problems finding and connecting to this network, but my Htc Hero doesnt even find it after I typed in SSID, password etc. manually.
am I making any mistakes or why doesnt this work?
greetings,
ben
Click to expand...
Click to collapse
I have a Belkin wireless router and had to disable the "11n" functions and go strictly with "11g". Until I did that my Hero wouldn't detect the network. After making the router setting changes I also had to disable the mobile network on the phone before it would see my network. Then I entered my security key and all was fine. Restarted the mobile network on the phone and it's automatically connected every time I'm in range. Don't know if that may be your problem or not... but good luck with it.
well, I dont have any problems connecting to my router via wifi. this works fine. the problem just exists with my laptop's adhoc network :<
thx anyway.
The HTC Hero doesn't allow connecting to ad-hoc networks. Its been disabled. If u have sdk, connect it and check tiwlan.ini & wpa_supplicant.conf file. Modify it to enable ad-hoc network and again save back..
So, my wifi will work on my Hero if there is no security on it. However, if I put WPA or WPA2 it will connect, and will work for a few seconds, then wont, and will disconnect because there is no connection. Anyone know of a solution?
Hi Guys. Need a little help.
Scenario: I have a wired ADSL connection in my home for internet. I have Windows 7 on my PC installed. I have a TP-Link TL-WN321G WiFi card in my PC as well.
Now, I want to share my PC's ADSL connection with my Vibrant through my WiFi card.
So far, I have failed to achieve it. I have tried doing it the TP-Link way by establishing a Soft AP through a software provided by them, but no success. I have tried connectify, no luck here either. My vibrant detects the network but never connects to it...
Any help, what so ever will be really appreciated...
Easiest way, get a $30 router at your local store. Will save you a headache. Otherwise bridge your wired and wireless connection using windows.
Sent from my SGH-T959 using XDA App
Well what you will need to do is allow ICS (Internet Connection Sharing) on the wired NIC card and allow other users to share the connection. It should DHCP the wired NIC and assign your wireless card an IP address like 192.168.137.1 and Subnet of 255.255.255.0.
Actually I don't want to buy a new router, want to use my WiFi card. And it is possible through it, so I think I should not spend money on a router...
I have tried everything... ICS is not working... Connectify is not working either...
There is some way of doing it through Adhoc network, I read somewhere but I have also read that Adhoc network is not supported in Android...
If someone can help, that would be great...
Odd because I'm doing ICS via Windows 7 and mine works perfectly..
***Edit...you might have to add in the default gateway ip and primary dns server ip on the wireless card for it to look for your wired NIC
just right click on your wired NIC and go to status and then details
Hmm... I am going to try this but do I share the internet with my WiFi card or the Virtual WiFi Miniport?
You share the wired NIC "allow other users to connect " it will act as your DHCP server and assign an address to your wireless card
Nothing is happening for me...
My Vibrant detects the WiFi AP but does not connect to it... It evens show the signal strength to be "Excellent" but does not connect to it...
Man... Its really frustrating when you can not get something to work...
So it just wont connect period?? Not even to network? Or will it connect and just no internet.... Hmmmmm
It just wont connect. Period...
Thanks for your willingness to help though...
Google "set up adhoc windows 7" to get your wireless set up properly, then should be easy. Keep it simple at first. Broadcast ssid and one you will recognize, and no password to eliminate any problems. Once configured and workinggo back and set up a password.
Sent from my SGH-T959 using XDA App
I have tried this Ad Hoc connection as well but I have read somewhere that Android does not support Ad Hoc connection. If there is some way around, please do tell me...
Finally... Got it working guys...
Here is the link: http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/
Followed it and it just worked...
Man, I am relieved...
Hi, Running VeganTab 5.1, and using a palm pre over freetether for wifi access, secure with wpa2. For some reason I can't connect with the phone until I connect with my computer. For example, I can try to connect using the Gtab, and it sits at "obtaining IP address" forever, bounces back and forth between trying to connect and disabling the connection. If I us my computer and connect to the network, the computer connects, then blam, the tab immediately connects. Clearly its a problem obtaining an IP address, but I'm not sure why it can't obtain it on its own, but waits for another device to connect. I'm not a networking guy, and I've only had the tab up and running for a week or so. I travel alot, hence the tab. Any ideas out there?
Thanks
Tdogg0406 said:
Hi, Running VeganTab 5.1, and using a palm pre over freetether for wifi access, secure with wpa2. For some reason I can't connect with the phone until I connect with my computer. For example, I can try to connect using the Gtab, and it sits at "obtaining IP address" forever, bounces back and forth between trying to connect and disabling the connection. If I us my computer and connect to the network, the computer connects, then blam, the tab immediately connects. Clearly its a problem obtaining an IP address, but I'm not sure why it can't obtain it on its own, but waits for another device to connect. I'm not a networking guy, and I've only had the tab up and running for a week or so. I travel alot, hence the tab. Any ideas out there?
Thanks
Click to expand...
Click to collapse
Adding on to my own post, I found if I connect w/o security enabled (WPA2) it connects just fine. anyone else have a problem connecting to a phone or mobile device with WPA2 encryption/authentication?
Hi,
I have the following issues with my Razr:
1. When connecting to my home network, sometimes the WiFi logo won't turn blue. This causes google talk to be unable to sign in. However the phone is connected to the network, internet browsing with Dolphin and Market work fine. Rebooting fixes the issue, when connecting now the WiFi logo turns blue as soon as connected and all is good.
2. I can't connect to my university's wifi: it is an 802.1x secured with PEAP and uses MSCHAPV2. When I set up the connecting (which i have to do manually by long pressing network -> modify settings) it fails to connect (says connecting to... then Disconnected). Weird thing is when modifying the network again, the settings are screwed up (e.g. set to use TLS, MSCHAPV2 unselected).
Does anybody have any ideas what to do about these (except for waiting for an update?) I am using the 651.73.18-version, so not updated so far...
Also, WiFi strength seems rather crappy with the Razr, i'm only getting ok signals where i used to get good ones with my desire and fail to connect when my cheap hp netbook connects fine...
Thanks lots for any help!!
cmdkeen said:
2. I can't connect to my university's wifi: it is an 802.1x secured with PEAP and uses MSCHAPV2. When I set up the connecting (which i have to do manually by long pressing network -> modify settings) it fails to connect (says connecting to... then Disconnected). Weird thing is when modifying the network again, the settings are screwed up (e.g. set to use TLS, MSCHAPV2 unselected).
Does anybody have any ideas what to do about these (except for waiting for an update?) I am using the 651.73.18-version, so not updated so far...
Click to expand...
Click to collapse
I have the same problem! drives me crazy . Any help will be appreciated!