I want to install a new ROM on my X10i.
1) Best Stable and perfectly working ROM available now ?
2) Flashtool or xRecovery ?
1) TRIP'S MIUI
2) can't figure out the question --> flashtool is for new baseband etc. | xRecovery is for installing new ROMs etc.
iMatth3w said:
1) TRIP'S MIUI
2) can't figure out the question --> flashtool is for new baseband etc. | xRecovery is for installing new ROMs etc.
Click to expand...
Click to collapse
Thanks but what abt FreeX10 beta4 ?
Yeah sry abt that , i thought xRecovery was a alternative for flashtool. Now i get it. Thanks
coolsid8 said:
Thanks but what abt FreeX10 beta4 ?
Yeah sry abt that , i thought xRecovery was a alternative for flashtool. Now i get it. Thanks
Click to expand...
Click to collapse
Beta 4 is good, but MIUI is perfect
but i have .54 but MIUI doesnt work on it
coolsid8 said:
but i have .54 but MIUI doesnt work on it
Click to expand...
Click to collapse
It doesn't work on .54
Flash .46 or .49
coolsid8 said:
I want to install a new ROM on my X10i.
1) Best Stable and perfectly working ROM available now ?
2) Flashtool or xRecovery ?
Click to expand...
Click to collapse
flashtool is for firmware/baseband flashing
xrecovery is for changing/updating ROMs
currently the only perfect roms are Eclair (2.1)
all Froyo (2.2) roms dont have video recording facility (if any then at very low fps 15fps with low res)
all GingerBread (2.3) roms dont have camera/video recording...
something for ur reference:
http://forum.xda-developers.com/showthread.php?t=955703
Related
http://forum.xda-developers.com/showthread.php?t=900441
have fun
Thank you so much, Trip!!!!
Downloading it now
Awesome,
I'm going to give this one a shot.
Tnx and keep it up
Greetz Liam
Is this Cyanogen ROM undervolted compared to the stock ?
Looking good mate.
Trip! You Are the King of the ROMs
@ T
does it work with the latest baseband 2.1.54 (shipped in stock 2.1.A.0.435 ROM)??
awesome bro! i'm gonna try this now )) thanks
Do you have to flash gapps file or anything?
Or is it good to go straight out the zip?
Sent from my X10i using XDA App
so vibrate and sensors haven't worked yet, am I right?
DooMLoRD said:
@ T
does it work with the latest baseband 2.1.54 (shipped in stock 2.1.A.0.435 ROM)??
Click to expand...
Click to collapse
I'm sorry but i dont know will you try it?
Its nice if someone could me because i dont want to reflash again.
If you run free x10 beta3 can i just install this over free x10?? Or do i have to flash som other rom first?? baseband ect.??
Your only Froyo Rom? Does this mean MIUI is canceled?
lhphong said:
so vibrate and sensors haven't worked yet, am I right?
Click to expand...
Click to collapse
No they work
edit:
MIUI is certainly not canceled, new update is almost ready
just my stock Froyo is canceled
Absolutely wonderfull! Gonna try this out now. If I find a bug, I'll post it in this post! BTW, does anyone know how to turn of 3g completely? I've been using APNdroid so far, but I guess there should be a setting for disabling 3g(?)
Very well done..
EDIT : Nvm,answered
Regards
TripNRaVeR said:
I'm sorry but i dont know will you try it?
Its nice if someone could me because i dont want to reflash again.
Click to expand...
Click to collapse
Trip check out Z's code for Beta 4 he put a fix for the new kernal and baseband in there he had to custom code to work.
CM M
too much work . I m dreaming ?
Trip ....... Make .. Belive !
Sony Ericsoon ....... Speak .....no Actions !
I still have 2.1 on my x10i and i am wondering will it be better to get froyo beta 4 or gingerbread?? What do u think?
I'll vote for 2.3.2
But as i see froyo has more things working then ginger, but is there any difference in speed?
fpapac said:
But as i see froyo has more things working then ginger, but is there any difference in speed?
Click to expand...
Click to collapse
I think 2.3.2 is more stabile than 2.2.1
Install 2.2.1 and TriP's MIUI.. perfect solution
iMatth3w said:
I think 2.3.2 is more stabile than 2.2.1
Install 2.2.1 and TriP's MIUI.. perfect solution
Click to expand...
Click to collapse
TriP's MIUI?? what does that do?
fpapac said:
TriP's MIUI?? what does that do?
Click to expand...
Click to collapse
makes your phone look like an iphone for some stupid reason... I think it has to be the ugliest rom I've ever seen, then again I hate the rows of icons and boring iphone appearance...
My vote goes to freex10 hands down... Hardly anything in the gingerbread rom works yet.
Yea i just saw it on youtube, and i didn't like it, but i also found CM6 and they said everything is working, so has any1 try it and how does it look
go for FroYo, Gingerbread is still in its early beta stage and you may not be happy with all the FC's and other unknown problems.
Gingerbread looks more promising, I would recommend you to wait for some time and check out further releases. I would vote for wolfbreaks froyo 6 .1.v4. Very stable and super fast.
fpapac said:
I still have 2.1 on my x10i and i am wondering will it be better to get froyo beta 4 or gingerbread?? What do u think?
Click to expand...
Click to collapse
Cheers!
AdY
<AdY> said:
I would vote for wolfbreaks froyo 6 .1.v4. Very stable and super fast.
Click to expand...
Click to collapse
can u pls give me the link
FreeX10 beta 4 has been perfect.....thats my vote
Sent from my X10a using XDA App
+ 1 for Froyo B4
Solid as a rock , fast as!
+1 FreeX10 beta4
Sent from my X10i using XDA App
+1 for Cyanogen mod by wolfreak..
hw to root my x10i?
my details
firmware: 2.1-update1
baseband : 2.1.54
kernel : 2.6.29
build number : 2.1.A.0.435
hw to root it? i try many bt cant... pls help
Here you go http://forum.xda-developers.com/showthread.php?t=945264
fpapac said:
can u pls give me the link
Click to expand...
Click to collapse
Cheers!
AdY
Use flash tool. Or the super one click root method.
Here is the link for the flash tool method. http://forum.xda-developers.com/showthread.php?t=920746
deathnature said:
my details
firmware: 2.1-update1
baseband : 2.1.54
kernel : 2.6.29
build number : 2.1.A.0.435
hw to root it? i try many bt cant... pls help
Click to expand...
Click to collapse
Cheers!
AdY
izit with the file name givmeroot.tar to root my phone? hw to install it?
i cant know about the details shown thr
i juz wan link for root of my phone
I prefer to use ROMs based on baseband 54, that's why I don't use J's gingerbread...
i have rooted my phone and i'm wondering which ROM to use.
i just installed CM6.1.3 woldbreak's from yesterday.
but seems a bit slow.
can you help me choose another one,or this is the best ROM for now.???
*I also like Eclair,but can i install from xrecovery an eclair ROM,or from 2.2 there is no turning back??
thanks,and sorry for my english.(i'm from greece)
(αν υπαρχει καποιος απο ελλαδα που να ξερει καλα απο αυτα ας μου στειλει να του στειλω msn να με βοηθησει.)
I am using this ROM: http://forum.xda-developers.com/showthread.php?t=947613
Have not faced any speed issue.. No bugs for me
thanks mate.
i just flash it using the xrecovery??
or i flash the ROM and after flash the camcorder fix?
and, i think that this is the same ROM with me,but the theme is gingerbread.am i wrong??
i'm using: CM-6.1.3-V4.5 + CMUpdate 4.5.7 + CM-V4.5Gapps
and when i go to settings->cyanogenMod Settings->user interface->tweaks and extras->select theme says: CM6.1.3-V4
MiRo31285 said:
thanks mate.
i just flash it using the xrecovery??
or i flash the ROM and after flash the camcorder fix?
and, i think that this is the same ROM with me,but the theme is gingerbread.am i wrong??
i'm using: CM-6.1.3-V4.5 + CMUpdate 4.5.7 + CM-V4.5Gapps
and when i go to settings->cyanogenMod Settings->user interface->tweaks and extras->select theme says: CM6.1.3-V4
Click to expand...
Click to collapse
You can install the ROM using Xrecovery from this link: http://www.mediafire.com/?gl9o0susbn0m31b And then flash Camcorder fix using Xrecovery http://www.mediafire.com/?kxfmw3s4e3asr7h
According to Dev, it's a complete new ROM... But remember to wipe Delvick Cache, Battery stats etc before flashing ROM
i ve done it bro. thanks.
but i miss the 720p video..
i am a snowboarder and i record videos everytime. now i need to take with me my camera..
AND i need to switch between stock camera app and vignette.
stock camera app has video recording and NO flash.
vignette has flash but NOT camcorder.. :'(
after CM6.1.3 gingerbread i deside to install the official again from SEUS.
after SEUS said that there is no new firmware nothing happens.
i try the sony pc companion and says to try again later.
AND after all of this
now the phone can't pass the white sony ericsson logo.
i have acces on xrecovery.
Do you have a backup of any ROMs that youve made in xRecovery? If so, you can restore it in xRecovery.
You can also repair your phone using SEUS. SEUS will say that there is no new firmware but install it anyway.
any 2.1 custom rom u guys recommend or give me all links for 2.1 custom rom so i can see ............(no 2.2 or 2.3 as i hav tired all but not tired 2.1 custom rom , CM-6.1.3 one of the best for MiRo31285)
rashcool46 said:
any 2.1 custom rom u guys recommend or give me all links for 2.1 custom rom so i can see ............(no 2.2 or 2.3 as i hav tired all but not tired 2.1 custom rom , CM-6.1.3 one of the best for MiRo31285)[/QUOTE)
You can flash the bluesparks ROM by malabarth. It is very fast and stable. You can find it here:
http://forum.xda-developers.com/showthread.php?t=892688
Click to expand...
Click to collapse
created this to avoid polluting the dev forum with my noobness
I've been following the kernel development from a distance, but getting more and more interested as the progress goes, for those testing it: Can I use it with any rom without compromise? For instance, camera will still work on wolfbreak's CM6?
The instructions on FreexperiaRecovery thread http://forum.xda-developers.com/showthread.php?t=1046609 are slightly confusing (too much info perhaps) but to do a fresh start of froyo with custom kernel i should:
1-flash a stock 2.1 with baseband 52 (or flash bb 52 separately) with flashtools
2-flash freexperiaRecovery and kernel with flashtools
3-flash baseband fix for 2.2 with freexperiaRecovery
4-flash 2.2 rom with freexperiaRecovery
5-reboot
Is that correct?
u need to flash the 2.2 rom first before the baseband patch, everything else seems about right
thanks! can't wait to try it
i'll ask here so i don't open another noob thread so sorry for the hijack
anyway, is there a custom kernel for 2.2 that has everything working? i can't seem to find a nice list of kernels with working/not working changelog, and of course it's benefits over the stock kernel
any explanation would be great
Wolfbreak's CM6
Sent from my X10 TripNMiUI using XDA Premium App
Astral07 said:
i'll ask here so i don't open another noob thread so sorry for the hijack
Click to expand...
Click to collapse
feel free to hijack maybe it's better to focus the noob questions here.
Hehe yeah i guess so
denenatse said:
Wolfbreak's CM6
Sent from my X10 TripNMiUI using XDA Premium App
Click to expand...
Click to collapse
hm, not sure what you were trying to say but i was searching for a kernel not rom
At this point the custom kernel is not stable (i.e. battery drain). I'd give it a month or two before a fully working kernel is released.
yeah, i've read there's a battery drain issue with the kernel, i've waited until now, waiting a little more wouldn't hurt.
Astral07 said:
hm, not sure what you were trying to say but i was searching for a kernel not rom
Click to expand...
Click to collapse
he means you can use the custom kernel with wolfbreak's rom, check this out
Second one (FreeXperiaRecovery and custom kernel booted as default) tested on:
2.3 superaosp v002
Achotjan_v01.3 - all works
Achotjan_v01.4 - all works (with achotjan 2.2.1 fix)
CM7.0.0 J016a K006 - all works
CM7.0.0 J017 K006 - all works
FreeX10 beta4 hotfix1 - all works
TripNMiUI 0.0.9 Gingerbread - all works
TripNMiUI 0.0.95 Gingerbread - all works
tripnmiui Final 1.0.4 - all works
TripNMiui Final 1.0.6 - all works
Wolfbreaks cm 6.1.3 v05.4 - all works
Wolfbreaks cm 6.1.3 v06.1 - all works
Click to expand...
Click to collapse
Astral07 said:
Hehe yeah i guess so
hm, not sure what you were trying to say but i was searching for a kernel not rom
Click to expand...
Click to collapse
oh sorry, my bad, cut and paste error =S
Sent from my X10 TripNMiUI using XDA Premium App
hi i am using FreeX10 beta4 hotfix1 runnin on bb52.. successfully but i cant seem to get the custom kernel to work... there are just too much info in the development section i hav been tryin to get this custom kernel to boot... but my fone keeps boot loopin
pls share your insight....
Finally decided to try a custom kernel, the zkernel for higher basebands since bb67 worked so well for me and I'm glad I've waited, not only this kernel is very stable but super easy to install.
No need to change my baseband or anything, simply flashed it with xrecovery 0.3 over my wolf's froyo rom, followed by Doomlord's fixes and after the reeboot, it was working, after two days use i've detected no issues.
Doomlord's thread http://forum.xda-developers.com/showthread.php?t=1136940
z's original thread http://forum.xda-developers.com/showthread.php?t=1135475
note 1: I've flashed z's original file and both doomlord's boot.img and wifi fix zip files, but in his thread Doomlord already provides the kernel with different boot.img for each rom.
note 2: there are two versions, but you only need the z23062011 version if the previous one gives you random shutdowns.
Guys no one is giving any suggestions
which is the best ROM for STOCK kernel....>?????
MiniCM6 v1.0.6 is best for me for stock kernel!
And the best rom for everyone will be different! So you need to check yourself which suits you the best! Happy Flashing!!!
--—--—--—--—---—----—---—--—-
Press Thanks it hardly takes a second!!! :thumbup::thumbup::thumbup::thumbup:
sender device :Amazing XPERIA X10 SuperMINI!
I prefer in stock kernel MiniCM7 pro V21 by Paul...
Just give a try, and decide which is better for you..!
thanks cerebro....but when i was looking for CM7 it said its for zombie and other kernels and it requires to unlock the bootloader because it installs the private kernel on that....
i will go for the custom kernel because i can feel the difference when i use the phone. so if you feel very brave and have more guts to unlock the bootloader you can test all the available kernels.
I prefer you can test that out with custom kernel. if you dont then its ok.
Every user has a personal opinion over rom and kernel. so it is pointless to know which one works with the stock kernel. You can go for a rom hunt and find out which one works for you.
Good luck!
for me best rom for stock is CM7v21 and GingerDX (any version)
also FlameDX.ICS style.
kasif20 said:
thanks cerebro....but when i was looking for CM7 it said its for zombie and other kernels and it requires to unlock the bootloader because it installs the private kernel on that....
Click to expand...
Click to collapse
I think you are getting confused... The miniCM7Pro by paul, is this
http://forum.xda-developers.com/showthread.php?t=1201116
And it works with stock kernel, I used it for a long time, in fact was the only Rom i prefered before I use the nAa.
So, give it a try...!!
I'm new here, and I'm searching for a while now for a stock 2.2.1 froyo rom because thats the most stable rom for my mini pro processor but i can't find it i found a couple but they have ugly icons of is honeycomb themed somebody know where i can find a 2.2.1 rom with original icons and theme
Stable2012 said:
I'm new here, and I'm searching for a while now for a stock 2.2.1 froyo rom because thats the most stable rom for my mini pro processor but i can't find it i found a couple but they have ugly icons of is honeycomb themed somebody know where i can find a 2.2.1 rom with original icons and theme
Click to expand...
Click to collapse
use the el MiniCM7 pro V21 by Paul!!! this is the best and fast rom for me! 100%...
thnx, i already tried that one but i had some issues with that rom, i have now for a few months mini arc and it works fine sometime a little bit slow and now i have v9 and looks great. i like the rom because the original state of it no weird icons or launchers (i hate that)
I have been using minicm7 pro v21 since it got out and had no problem with it.
I haven't tried arcmini or the latest gingerDX though.
Would Be MiniCM7 Pro V21...
2.1.1.Clean.0.0 V5
Lite, quick and fully working. The best.
2.1.1.Clean.0.0 V5
i like to install this. . . but im confuse about the build number . .
it requires: 2.1.1.C.0.0
but i have 2.1.1.A.0.6 . . .
can i flash the ftf file of 2.1.1.C.0.0 even i dont unlock my bootloader???
iZero00 said:
2.1.1.Clean.0.0 V5
i like to install this. . . but im confuse about the build number . .
it requires: 2.1.1.C.0.0
but i have 2.1.1.A.0.6 . . .
can i flash the ftf file of 2.1.1.C.0.0 even i dont unlock my bootloader???
Click to expand...
Click to collapse
Yes.
Sent from my U20i using xda premium
I can't decide which Rom for stock kernel to use. .anyone can tell me the performance of each rom which is compatible for stock kernel. .
thanks a lot sir. .
jodhaniohm97 said:
MiniCM6 v1.0.6 is best for me for stock kernel!
And the best rom for everyone will be different! So you need to check yourself which suits you the best! Happy Flashing!!!
--—--—--—--—---—----—---—--—-
Press Thanks it hardly takes a second!!! :thumbup::thumbup::thumbup::thumbup:
sender device :Amazing XPERIA X10 SuperMINI!
Click to expand...
Click to collapse
I have to agree, MiniCM6 was best for me with stock kernel. But in comparison to custom kernel it's still a bit slower
minicm7 PRO vs
minicm7 PRO vs GingerDX v21 . . .
which is better??
i can't decide .. .
iZero00 said:
minicm7 PRO vs GingerDX v21 . . .
which is better??
i can't decide .. .
Click to expand...
Click to collapse
visual miniCM7v21
but fastest for me was stornmix v2 (stark) of course on stock kernel
but miniCM7 2.1.7. + nAa -09 kernel works much much faster
jodhaniohm97 said:
the best rom for everyone will be different! So you need to check yourself which suits you the best!
Click to expand...
Click to collapse
Yes Thats quite RIGHT. Everyone has different test, demand, style. So, TO Check Every ROM as categorized GO TO THis Post>>>>>>>http://forum.xda-developers.com/showthread.php?t=1587177
It has everything you need. Just look for you Phone model and ROMs under it.