I was trying to install axura custom ROM. So I copied it to the sdcard and then I rebooted to recovery. Everytime I choose "reisntall package" this what shows up :
i51.tinypic.com/212fpfa.jpg
you need to download rom manager and flash clockwork recovery first. You do not install rom's from the stock recovery. Read the noob guide if you have not already.
if you do have CWR, go to install from zip from sdcard and choose zip.
yes, I installed that already and chose Samsung vibrant after that i rebooted to recovery and that's what happened.
anyone who knows what the problem is?? been fixing it for a day.. but still can't make it work.
chase15 said:
anyone who knows what the problem is?? been fixing it for a day.. but still can't make it work.
Click to expand...
Click to collapse
Are you coming from stock 2.2?
not sure..i got this phone with 2.2 already installed.. im pretty sure its the stock..
chase15 said:
not sure..i got this phone with 2.2 already installed.. im pretty sure its the stock..
Click to expand...
Click to collapse
Ran into some crazy issues when rooting/custom flashing a friend's vibrant from stock 2.2. I ended up using ODIN back to 2.1 and then rooting and flashing a custom rom. The file system on 2.2 is different and CWM doesn't like it right away.
Also, that 3e recovery is a ****.
Read some of this...
http://forum.xda-developers.com/showthread.php?t=833423
http://forum.xda-developers.com/showthread.php?t=945294
and watch this
http://www.youtube.com/watch?v=AnY7P14JSWQ
Lots of work, but worth it. Please read up on other options too.
Good luck
ok.. so all this means... flashing ack to 2.1.. using odin.. then install custom ROM?
Essentially, yeah. Here's an OP that I just stumbled across. It should step you through it. I wish I had seen this when I was fumbling with errors messages like that on my friend's phone.
EDIT: This is a non-ODIN solution:
http://forum.xda-developers.com/showthread.php?t=925400
Good luck
chase15 said:
ok.. so all this means... flashing ack to 2.1.. using odin.. then install custom ROM?
Click to expand...
Click to collapse
Yeah, I had the same problem with my friend's phone. After you go back to stock, you can use z4root to apply a temporary root and then install CWR. Kind of a pain, but it gets the job done.
Sent from my SGH-T959 using XDA App
alright.. flashing 2.1 now.. ill come bck later.. if everything will work.
problem solved! Successfully flashed axura.. Thanks!
Rock on.
Congrats!
Vibrant on T-Mobile.
Powered by Whiskey and Voodoo magic while riding a Dead Horse.
chef_w said:
Rock on.
Congrats!
Vibrant on T-Mobile.
Powered by Whiskey and Voodoo magic while riding a Dead Horse.
Click to expand...
Click to collapse
thank you.. now waiting for my ffc.. gonna install it when it arrives.
Related
Hey all.
I've been trying to flash ShadowROM onto my eris (got the eris dl off their site), but everytime I try to flash it on it gives me "E:missing file: recovery/recovery-from-boot.p" and "E:Verification failed" and then aborts the installation.
So I then tried re-downloading the rom, but the same thing happened again.
Any ideas on what might be going on? I did all my wipes and everything so I'm not really sure what could be going on. Also I have been using Evil Eris for a while, if that makes any difference.
Thanks in advance for any advice.
EDIT: Also I'm currently on 2.1 so I'm not sure if theres anything I need to do to be able to put a 2.2 rom on my eris.
greekstallion said:
Hey all.
I've been trying to flash ShadowROM onto my eris (got the eris dl off their site), but everytime I try to flash it on it gives me "E:missing file: recovery/recovery-from-boot.p" and "E:Verification failed" and then aborts the installation.
So I then tried re-downloading the rom, but the same thing happened again.
Any ideas on what might be going on? I did all my wipes and everything so I'm not really sure what could be going on. Also I have been using Evil Eris for a while, if that makes any difference.
Thanks in advance for any advice.
Click to expand...
Click to collapse
At this time it doesn't work with Amon's recovery. It only will work if you use clockwork, which isn't recommended. I got it to work but I use a rom kitchen and replaced the boot-img.
Busphan said:
At this time it doesn't work with Amon's recovery. It only will work if you use clockwork, which isn't recommended. I got it to work but I use a rom kitchen and replaced the boot-img.
Click to expand...
Click to collapse
Ah I see, hrm I really wanted to give it a try too.
Out of curiosity, why isn't clockwork recommended?
greekstallion said:
Ah I see, hrm I really wanted to give it a try too.
Out of curiosity, why isn't clockwork recommended?
Click to expand...
Click to collapse
There have been a few reports of bricks from just flashing roms.
Busphan said:
At this time it doesn't work with Amon's recovery. It only will work if you use clockwork, which isn't recommended. I got it to work but I use a rom kitchen and replaced the boot-img.
Click to expand...
Click to collapse
You don't need to replace the boot.img....the rom just needs to be signed and it will flash fine amon's. Clockwork can load an unsigned rom but amons can't....
Conap said:
You don't need to replace the boot.img....the rom just needs to be signed and it will flash fine amon's. Clockwork can load an unsigned rom but amons can't....
Click to expand...
Click to collapse
Thanks for the info that would have been easier. I just replace it because of the error message.
**please ignore, sorry!**
Clockwork wont hurt your phone. Also when you go into to clockwork and flash clockwork recovery it will only temp use clockwork as a recovery just to install the rom. After that it will boot into amon.
"Clockwork won't hurt your phone" Boyyyyyyyyy I bet a lot of people with broken eris's would be glad to hear that!
Hungry Man said:
"Clockwork won't hurt your phone" Boyyyyyyyyy I bet a lot of people with broken eris's would be glad to hear that!
Click to expand...
Click to collapse
You running clockwork Hungry Man? I wasn't ever trying to stop anyone, I just wanted them to look into it themselves.
Conap said:
You don't need to replace the boot.img....the rom just needs to be signed and it will flash fine amon's. Clockwork can load an unsigned rom but amons can't....
Click to expand...
Click to collapse
Im not knew to the rooting and flashing thing when it comes to my eris, but i do have to ask for my knowledge: what do you mean by the rom needs to be signed?? thanks!!
duccicucci said:
Im not knew to the rooting and flashing thing when it comes to my eris, but i do have to ask for my knowledge: what do you mean by the rom needs to be signed?? thanks!!
Click to expand...
Click to collapse
He means that this rom will not work with amons recovery because it isn't signed. You can create a zip that isn't sign, meaning you never used a program that signs zips, but you can't flash a zip in amons unless it is signed. So if you just create a zip it probably won't work, but if you use an autosigner then you will be in buisness. I hope this helps, probably not because I have been drinking.
Just so there's full information in case someone finds this thread in the future.
There was a bug with using Clockwork Mod Recovery with the Eris. They squashed it, at least 2-3 months ago.
Besides, you don't have to get rid of amon in order to use clockwork. Just download ROM Manager from the Market and it will make it so that you can load clockwork from amon. Then you get all the advantages of ROM Manager and clockwork without any hassles.
Sent from my xtrSENSE Eris using XDA App
I'm having issues loading the rom, it keeps staying on the 3 skateboarding droids then it reboots back to the skateboarding droids whats going on?
johnny quest said:
I'm having issues loading the rom, it keeps staying on the 3 skateboarding droids then it reboots back to the skateboarding droids whats going on?
Click to expand...
Click to collapse
This seems to be a hit or miss build for the Eris. About 50% (guestimated) of Eris users are unable to boot with v0.2.x and there is no known reason why, even after viewing logcats.
I have dropped the entire desirec device configuration (a mix of kaos & conap) and have forked over a pure conap device config for v0.3.x to attempt to fix this issue. We won't know for sure until v0.3.0 finally releases to the masses. All my testers (even myself) are able to run v0.2.x just fine.
There is no ETA for v0.3.0 at this time.
I'm sorry if this is off topic but I need to ask. Were can you get themes for ShadowRom? Do you just use anything that is for cynogen? Is it best to use metamorph or and update.zip?
I flashed shadowrom using clockmod just fine.
Sent from Eris with Froyo
xtreme3737 said:
I'm sorry if this is off topic but I need to ask. Were can you get themes for ShadowRom? Do you just use anything that is for cynogen? Is it best to use metamorph or and update.zip?
Click to expand...
Click to collapse
We currently have zero themes for the eris. We rely on themers to provide ports, which none have done yet.
Guess I'm one of the lucky ones
billygalbreath said:
This seems to be a hit or miss build for the Eris. About 50% (guestimated) of Eris users are unable to boot with v0.2.x and there is no known reason why, even after viewing logcats.
I have dropped the entire desirec device configuration (a mix of kaos & conap) and have forked over a pure conap device config for v0.3.x to attempt to fix this issue. We won't know for sure until v0.3.0 finally releases to the masses. All my testers (even myself) are able to run v0.2.x just fine.
There is no ETA for v0.3.0 at this time.
Click to expand...
Click to collapse
I flashed this rom and it was slow and jittery and all around not good.
Sent from my ERIS using XDA App
I flashed the DoW rom/kernal using clockworkmod on my vibrant and it gets to the boot screen (the screen with tw in brackets and an atom cloud) and just hangs. Anyone know what's goin on?
rmp5s said:
I flashed the DoW rom/kernal using clockworkmod on my vibrant and it gets to the boot screen (the screen with tw in brackets and an atom cloud) and just hangs. Anyone know what's goin on?
Click to expand...
Click to collapse
As far as I know DoW is a kernal not a rom. Make sure it will work with whatever your current rom is. Working great flashed over nero5.
I would odin back to stock, flash custom froyo rom then kernal....
By chance did you have lag fix disabled?......works fine with nero 4.1 and 5 for me.....but I found nerov5 works great without it
Sent from my SGH-T959 using XDA App
K5C5S5 said:
I would odin back to stock, flash custom froyo rom then kernal....
Click to expand...
Click to collapse
+1
Also remember that not all phones will handle the oc'd kernels
if you can get into recovery, you can try flashing a different kernel or reflashing your rom.
I'm currently running Bionix oc/uv and love it.
I DID undo the lagfix before flashing this.
If I could get a link to the stock odin files to flash so I could give the amazing sounding DoW a shot, I'm sure I could get it working.
Im running DoW 1.3 on AxuraJL5, and it does the same thing. i often have to pull the battery for a successful reboot. its sucks, but ive learned to live with it
wrong section to post this in, not to be a drag but its just that these forums can get clogged up with stuff like this if we dont keep posts in order. Q&A or under the DoW thread would suffice.
funeralthirst said:
if you can get into recovery, you can try flashing a different kernel or reflashing your rom.
Click to expand...
Click to collapse
With all due respect, if I could get into recovery, I wouldn't be posting this...
I made a fresh Nandroid before trying this but I can't get to recovery or anything.
brandonkahn said:
wrong section to post this in, not to be a drag but its just that these forums can get clogged up with stuff like this if we dont keep posts in order. Q&A or under the DoW thread would suffice.
Click to expand...
Click to collapse
I understand. If a mod moves it, it's all good. Just looking for help...my phone is sitting stuck at the atomic bomb screen still. It's been 2 hrs...just lookin for a hand. :-D Thanks!
have you tried getting it into download mode? i know you said you cant get into recov. but download mode is different.
first, do you know how to get into download mode?
well in short if you dont, when ur phone hangs.. pull the battery. with the bat. out hook it up to ur comp with odin running... as ur holding down the vol. up and down buttons stick in the batt. then you will be in download mode. then flash back to JFD
Maybe im wrong but isn't the dow kernel for 2.2. Didn't he say he was on bionix and isn't that a 2.1?
Powered by Axura with a dash of Voodoo
you are correct, i missed that he stated he was using bionix. OP there is your problem, you flash a 2.2 kernel with a 2.1 rom. flash back to stock via my instructions and you willl be fine.
you will need this http://forum.xda-developers.com/showthread.php?t=734475
Glad we got that taken care of.before he hard bricked his phone.
Powered by Axura with a dash of Voodoo
GreggoryD502 said:
Glad we got that taken care of.before he hard bricked his phone.
Powered by Axura with a dash of Voodoo
Click to expand...
Click to collapse
lol...I did this with my wife's phone...no boot and no recovery is very disheartening to say the least. lol
So...I flash back to stock using the thread provided and then flash DoW?
rmp5s said:
lol...I did this with my wife's phone...no boot and no recovery is very disheartening to say the least. lol
So...I flash back to stock using the thread provided and then flash DoW?
Click to expand...
Click to collapse
after you flash back to stock you of course are going to want to root your phone again, then youre going to want to go to team whiskey and download Nero... a 2.2 rom that works with the kernel. then you will want to flash DoW. I would also consider downloading setcpu because that kernel will drain the heck out of your bat. make sure you dont set to boot with setcpu, and just use the conservative setting.
team whiskey http://teamwhiskey.com/DownVibrant.html
again make sure its a 2.2 rom.
DoW works with any Nero (2.2) Team Whiskey Rom. You have to disable Vodoo LF before flashing, otherwise you will get stuck in a boot loop. Make sure to let the Rom run for a few minutes after flashing before replacing the kernal. You can always pull a logcat to see what your phone is doing when it hangs.
brandonkahn said:
after you flash back to stock you of course are going to want to root your phone again, then youre going to want to go to team whiskey and download Nero... a 2.2 rom that works with the kernel. then you will want to flash DoW. I would also consider downloading setcpu because that kernel will drain the heck out of your bat. make sure you dont set to boot with setcpu, and just use the conservative setting.
team whiskey http://teamwhiskey.com/DownVibrant.html
again make sure its a 2.2 rom.
Click to expand...
Click to collapse
Very fist, I wanna say thanks a million to all the replies and help. :-D
Ok...now...to set the record straight, my phone just tries to boot to the DoW and does nothing after. It just hangs.
Yes. I was running a 2.1 rom (Bionix) with a 1.2ghz oc, the uv kernal and the voodoo lagfix (which WAS DISABLED before flashing) but I thought I did everything right. If I had known that switching from a 2.1 rom to a 2.2 rom would have been this much more involved than I thought, I might have reconsidered...lol
I did a Nandroid backup using clockworkmod prior to doing anything else. I got to the red recovery (not 100% sure how I did it, to be honest) and tried to flash my backup and it didn't work.
I'm going to try the previous post about flashing back to stock, then doing the DoW flash but that's kind of a last resort. I'd like to not wipe my data, nandroid, etc before flashing but it's kinda whatever at this point since my phone doesn't work at all right now...lol
Thanks once again all of you!!! This is what makes Android what it is.
Was running Trigger with TW's voodoo recovery, tried flashing Eugene's new kernal.
I disabled voodoo, installed the kernal, rebooted. Boot loop.
So I figured, no big deal, right? Wipe, toss on an old stable ROM. CWM is cyan again and won't get into the "choose zip from sd" mode.
...uhhh... anyone have any ideas? Do I need to ODIN?
Oxirane said:
Was running Trigger with TW's voodoo recovery, tried flashing Eugene's new kernal.
I disabled voodoo, installed the kernal, rebooted. Boot loop.
So I figured, no big deal, right? Wipe, toss on an old stable ROM. CWM is cyan again and won't get into the "choose zip from sd" mode.
...uhhh... anyone have any ideas? Do I need to ODIN?
Click to expand...
Click to collapse
probably..
Crap... well, thanks. Guess I needed to learn how sooner or later.
Can anyone point me in the direction of the almighty ODIN?
Oxirane said:
Can anyone point me in the direction of the almighty
Search the stickies. All the info is there for you.
Sent from my nuclear powered submarine!
Click to expand...
Click to collapse
ODIN keeps telling me 0 succesful/0 failed
Help? D: Trying to use this method: http://forum.xda-developers.com/showthread.php?t=848737
got the correct drivers?? try installing these from this thread
http://forum.xda-developers.com/showthread.php?t=728929
and try again
Mr. Apocalypse said:
got the correct drivers?? try installing these from this thread
http://forum.xda-developers.com/showthread.php?t=728929
and try again
Click to expand...
Click to collapse
Your suggestion from the main topic got me back my old recovery, but still no files. Helps?
OK, so just yesterday, I realized that for some reason, I cannot play any videos on my Vibrant. This includes both videos I have put on my phone as well as those I have taken with my camera.
I am running Bionix 1.3 ROM. I searched but didn't find anything. I have not had this issue before. Any help is appreciated.
Reflash,I suggest odin to stock and reflash or try just flashing the new vrs of the overstock kernal.
Carl
carlcj5 said:
Reflash,I suggest odin to stock and reflash or try just flashing the new vrs of the overstock kernal.
Carl
Click to expand...
Click to collapse
Agree flash back to stock, then reflash best way
Thanks
OK. I've never used Odin before. To be honest, I'm a bit intimidated. Would you suggest using that AIO Vibrant Toolbox to do it?
cccheel said:
OK. I've never used Odin before. To be honest, I'm a bit intimidated. Would you suggest using that AIO Vibrant Toolbox to do it?
Click to expand...
Click to collapse
toolbox is very simple and straight forward
cccheel said:
OK. I've never used Odin before. To be honest, I'm a bit intimidated. Would you suggest using that AIO Vibrant Toolbox to do it?
Click to expand...
Click to collapse
Don't be afraid of Odin....
true: you can screw up if you use the wrong files or disconnect before it finishes...but if used correctly Odin can be your Vibrant's best friend...
EDIT: I've been having that same problem since KB1.....might be a DRM issue pointed out by Br1ck'd in my thread here:
http://forum.xda-developers.com/showthread.php?t=961841
Yea, but the thing is, it's not just DRM files - it's any video file.
Fixed
Just rebooted, and it seems to be fixed...hm... Thanks anyways, guys.
cccheel said:
Just rebooted, and it seems to be fixed...hm... Thanks anyways, guys.
Click to expand...
Click to collapse
but it comes back after some time. yes when you do a reboot it goes away but i after some time it comes back then you have to do reboot again i don't want to do that. why does it keep on doing it in first place. any ideas?
Try a 2.2.1 rom
Sent from my T959 using XDA App
This happens no matter what if you haven't rebooted in a while. My buddy on his completely stock KA6 was complaining about it all the time, just reboot at least once a day and you will be fine. No Rom will fix this issue that I am aware of but to be honest I have NEVER had this problem by always doing the before mentioned fix.
Can anyone loan me a hand? I just got my new Samsung Fascinate today and I really like it. Can anyone here help me root it? It's on
version 2.2.1.
Build Number: SCH-I500.ED04
Kernel V: 22.6.32.9
Model: SCH-I500
Hardware V:I500.04
If you can, please help me out. I'm familiar with jailbreaking iPhones and iPods but have never dealed with an Android.
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
What he said... But if you want other roms, don't bother with unrooting.
Just update your recovery to the latest CWM and flash a new rom using CWM.
But I would make sure to read up before taking any steps further to make sure you know what steps to take.
Sorry, but I don't even know what a rom is. I'm familair with iPhone Jaibteaking and thats it. This is my first Android phone. All I Wanna do is be able to install the themes and tweaks and get free tethering. I'm sorry i don't know much.
Sent from my SCH-I500 using XDA App
I had root on my Fascinate and then I updated OTA to Froyo 2.2.1 and lost root.
How do I root my Fascinate now?
FW=2.2.1
Kernel=2.6.32.9
Build=SCH-I500.ED04
Baseband=S:i500.04V.ED04
Thanks to you and all the help on XDA.
Same that was already posted above.... READ
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
When I tried to download the "update.zip" file I get a 404 error.
Thanks
RacerXFD said:
What he said... But if you want other roms, don't bother with unrooting.
Just update your recovery to the latest CWM and flash a new rom using CWM.
But I would make sure to read up before taking any steps further to make sure you know what steps to take.
Click to expand...
Click to collapse
I would go this route, load up ComRom 2.1 and get rid of the ED04 radio it has some issues. It's not as hard as it sounds to do this. Just read up and enjoy a better running phone.
nunyazz said:
Same that was already posted above.... READ
http://forum.xda-developers.com/showthread.php?t=1046855&highlight=root+ed01
Click to expand...
Click to collapse
I went to the page you suggested and when I tried to download the "update.zip" I get a 404 error.
What is next?
Thanks
sfobrien said:
I would go this route, load up ComRom 2.1 and get rid of the ED04 radio it has some issues. It's not as hard as it sounds to do this. Just read up and enjoy a better running phone.
Click to expand...
Click to collapse
If this is the route you want to take (I highly recommend it as well), I would check out this thread or even this thread (although it is on Android Central, so you will need to make an account to see all the links if you don't already have one). They are pretty similar (the latter is a bit overboard on detail, but that can be a good thing if you are new to the process) and should at least get you started on learning what it is you need to learn to ultimately wind up at ComRom 2.1. I hope this helps!
Hello. I finally found out what a ROM was and how to use ODIN. I had my Uncle to ROOT my Fascinate when he was down this weekend. Last night, my phone got bricked or stuck in blue recovery and I had to flash it. Or restore it using ODIN. Anyhow, can you tell me the steps to get it rooted again with Odin & Evil Fascination? ClackWorkRecovery caused thus because I couldn't get it to work to install Com rom.
Sent from my SCH-I500 using XDA App
For a better understanding, I want to do the following:
Steps to Rooting my SCH-I500 with Evil Fascinate
Getting clockworkmod working correctly
& Installing Com rom.
Sent from my SCH-I500 using XDA App
GagesiPad said:
For a better understanding, I want to do the following:
Steps to Rooting my SCH-I500 with Evil Fascinate
Getting clockworkmod working correctly
& Installing Com rom.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Evil Fascination and Community Rom are two different roms and both will root your phone when flashed... this is how mine's set up for ComRom and it works flawlessly:
1) download odin, samsung mobile phone drivers, debloated/debinged/deodexed EB01 all in one package, CWR3-Voodoo, and ComRom 2.0 package of your choice and the 2.1 patch... place ComRom and its patch onto your sd card
2) use odin to install EB01
3) boot up phone once to let it format itself
4) power off phone and use odin to then install CWR3-Voodoo
5) boot straight into CWR, wipe data/cache/dalvik 3 times each and assuming you don't want to backup/restore data (I usually just use Titanium Backup app from the market) proceed to install .zip of ComRom 2.0
6) select reboot phone and let it boot up, it may take a while the first time
7) congrats, you're rooted and running ComRom 2.0
8) to install the patch simply hold the power button down until the menu pops up, select recovery
9) this will boot you into CWR again, no data/cache wipe necessary simply install .zip ComRom 2.1 patch then reboot phone again
10) congrats now you're rooted, voodoo'd, and running the latest ComRom
hope this helps, that's about as simple and short as I can make it
tapatalked from my KangBanged Fascinate
Ok. Thanks for letting me know that. I had no idea there was a difference. I'm new to this stuff so. Yah. Anyways, I used that guys post to root my phone (the first reply with the link) and it worked for me. Can you give the the download links to all of the stuff up there that you mentioned? Or is there another thread that you go that from with a better understanding? With the links and all? I'm not sure what Voodoo is. I just want the Com Ron up and going. ;-) thanks =D
Sent from my SCH-I500 using XDA App
GagesiPad said:
Ok. Thanks for letting me know that. I had no idea there was a difference. I'm new to this stuff so. Yah. Anyways, I used that guys post to root my phone (the first reply with the link) and it worked for me. Can you give the the download links to all of the stuff up there that you mentioned? Or is there another thread that you go that from with a better understanding? With the links and all? I'm not sure what Voodoo is. I just want the Com Ron up and going. ;-) thanks =D
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
this should give you a current recovery (CWM), I use the first one:
http://forum.xda-developers.com/showthread.php?t=1046905
most everything else can be found in landsharks thread here: odin, the samsung drivers, debloated/deodexed EB01 and ED01, and how to install all of that (props to landshark68 for putting it all together)
http://forum.xda-developers.com/showthread.php?t=1048380
ComRom can be found here along with instructions on how to flash, changelogs to see whats been updated, known bugs... I would suggest reading the first few posts by nitsuj17 just to get familiar with it:
http://forum.xda-developers.com/showthread.php?t=1108991
superchunkwii put up a pretty nice detailed thread on how to get to ComRom if you're at stock (or need to go to stock, then go to ComRom):
http://forum.xda-developers.com/showthread.php?t=1053567
last but not least voodoo, these are the closest threads I could find that describe it (second one is a little better):
http://forum.xda-developers.com/showthread.php?t=1043673&highlight=voodoo
http://forum.xda-developers.com/showthread.php?t=1039897&highlight=voodoo
i know it might seem like information overload and a lot of reading, thats why i tried to simplify it in my instructions in my previous posts... if you download what you need from those threads then follow the steps I listed you shouldn't have any problems. If you do, don't worry we're here to help
Ok. From my understanding, CWR3-Voodoo is like the one click lag fix right? I'm actually using that on my phone now. When I'm on my computer later, ill go through all that and learn more about it and download everything and try it. =]
Sent from my SCH-I500 using XDA App
GagesiPad said:
Ok. From my understanding, CWR3-Voodoo is like the one click lag fix right? I'm actually using that on my phone now. When I'm on my computer later, ill go through all that and learn more about it and download everything and try it. =]
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
yes it has an option for enabling/disabling lagfix but its optional.. even if you decide to flash a rom with no voodoo kernel you can still use that CWM with no worries
tapatalked from my GINGERBANGED Fascinate
Thanks. Since I'm allready rooted, can I skip to steps 20-24 and do that?
GagesiPad said:
Thanks. Since I'm allready rooted, can I skip to steps 20-24 and do that?
Click to expand...
Click to collapse
yeah if you're rooted and running the baseband you want (ED01 or whatever) the boot into CWR and flash the rom you want... you're going to need to do a data/cache/dalvik wipe before flashing the initial ComRom 2.0 package so make any backups you want.. once its done installing reboot phone to make sure everything works right, then boot back into recovery and flash the patch (no wiping or anything needed) any questions or problems be sure to post them
tapatalked from my GINGERBANGED Fascinate
Thanks! I back up my stuff though Titanium back up. One thing though, how do I tell if I have CWR installed? Thanks for your help!