Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
This shows what happens when I try reading the phone on KDZ... also a little part showing that I got my device to be recognized by windows...
also disabled the LGE modem on device manager, read that if I don't it'll get bricked.
Well it won't let me link the image so... just paste the name together.
www
novasite.com.br
/1.jpg
1. Find a suitable v2.2 stock ROM for flashing (link)
2. Use KDZ to flash it (I am not aware of another tool capable of doing that). Try doing that on a PC running Windows XP (important - that's where you're stuck now and I guess you're using Windows 7).
3. Root your phone - search for "z4root" on Market, install it.
4. Install Custom recovery, which will replace your current (stock) recovery mode (link - you may need to create an account on another forum in order to download).
5. Using Custom recovery you can now install any custom ROM and create nandroid backups to restore your phone to a certain (working) state.
You will have to use KDZ again if you ever want to flash a stock ROM, also losing the custom recovery. But you will have no reason to do that, except if you need to take your phone to some warranty repairs.
Good luck!
NEW PROBLEM: About step 1... i finally found a way to get my country's rom, but... it's.. the same thats on my device right now, it says V10a_02 and thats the same on my phone (the kdz read phone tells me that) so... won't I just be flashing the same 2.2.1 again?
http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500H/ABRABK/V10A_02/V10A_02.kdz <---- the rom the topic tells me to get.
How do I know what version of android is in that rom? and if i can't, can you link me to a rom that does?
I found one from another country that the guy said is 2.2... but... will it work if i flash that one? does it HAVE to be for my country? also my model is p500h (the h) is it different from the p500 (different as in flashing p500 without h roms on it will kill it?)
As for flashing it...
I think maybe a computer with win xp will do the trick for kdz.
i've found this post today:
http://forum.xda-developers.com/showthread.php?t=944881
is it better to use that than kdz? theres no replies on topic saying "hey it worked" so i'm a little worried, but apart from a few errors it seems to work on my win 7....
i guess the reply would be "i only know kdz, do it with kdz" but i thought i might ask...
Indeed, I have not tried that method and therefore I can't recommend it. At least KDZ is successfully tested. If you are patient enough to wait for some replies either here or in that topic, you may find out if it works. I would recommend it only if you have no other choice, like if you're unable to try KDZ on an XP machine.
In the mean time, I remembered that a newer version of Custom recovery is available (v1.2) - here. But you still need to download a file and read the tutorial from that other forum I mentioned in the previous post.
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
edumazieri said:
Phone: LG P500h - ANDROID v 2.2.1 buildnumber FRG83.
Country: Brazil
Anyway, what I know is that i have to downgrade it to 2.2 in order to be able to root. I've looked through a bunch of tutorials on a bunch of websites but there are a few questions i have about the process that isn't answered anywhere i've looked.
Apparently downgrading requires me to get a stock ROM from LG, there is a topic here for that but it does not have the right ROM for my country, i tried a couple codes but they all got me 404.
Can I just flash any standard ROM from, US maybe, will it work?
And if yes, how do I flash it? Apparently you can do that by booting into recovery mode, but to get there you need it to be rooted which I can't do.
I've read about KDZ and downloaded that but... it crashes a lot in my PC (whenever i try the Read Device) it gives me error and closes the program (windows program not responding dialog).
I'm afraid it might crash in the middle of it if i try flashing and that would brick my device.
Is there a simple way to flash a new ROM? Is that the first thing I have to do in order to get a custom ROM say Ubuntdroid? It says I need a new recovery... but for that I need to downgrade first? It's a lot to do... and I don't really get the order in which I should do it all in...
Can somebody post me a little "do this, then do that, then finally do that" so that I can understand it all finally?
Thanks in advance, and sorry for long post, was trying to be as informative as possible.
Click to expand...
Click to collapse
First backup your data, then download a factory ROM, it doesn't matter which version u download, what matters is the version. Make sure that it's 2.2 and not 2.2.1 or 2.2.2. Follow all the below steps without skippin any, no matter how simple or stupid they are.
Link for shipped ROM - http://forum.xda-developers.com/showthread.php?t=865479
Now download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
Install msxml.msi from the uncompressed directory
Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
Turn phone off somehow (remove battery etc.)
Install drivers properly
Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
Install the LG drivers by selecting the update manager from the lg site
Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
Yellow screen with text emergency mode should appeared
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
I Recommend do not switch phone off. There was some people, which done it and after they was not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
In KDZ file : Choose the ROM file you downloaded in the first step
Press Launch software update
Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
Now Root it via Z4root - http://forum.xda-developers.com/showthread.php?t=833953
Then install custom recovery - http://forum.xda-developers.com/showthread.php?t=844483
Then download n flash any ROM of your choice, I wud sugget install Void or LOL.
Edit :- By the time I replied, many have already replied. Anyways you can check my reply too :-D
Mithun.
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
edumazieri said:
"it doesn't matter which version u download, what matters is the version."
does that mean it doesn't matter what country or operator the rom is for, as long as it is android version 2.2?
i have one from portugal (not my country) and that one is made for P500 mine is P500H... if that makes a difference i don't know, but i do know that rom is android 2.2. can i flash that one?
i also have one that i got from that topic following the instructions of putting my serial number, it linked me to a rom V10A_02... on KDZ when i try to read my device it says i have V10A_02 too. isn't that the same one i have now? with android 2.2.1? if it is it's very pointless to flash the same rom already in it.
any way to check?
because that is my last doubt ;p
Click to expand...
Click to collapse
Yes.... you can choose any country. I tried the Australian version. Use the below one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/AAUSBK/V10a_00/V10A_00.kdz
edumazieri said:
what about the first part of the post? i think i might have added that after you replied i don't know... asking about the rom i found if it isn't the same i have on my phone. and asking if i can just add another country's one...
Click to expand...
Click to collapse
As far as my knowledge goes, the LG P500h you have is the same phone as the P500, only branded for Telus. The hardware should be identical, therefore you may use any ROM designed for the P500 family.
The only thing you may miss if you install a ROM not customized for a Brasil (or South America) network operator is the internet acces point name, thus rendering your phone unable to acces the internet trough its data service connection, but only trough WiFi. Nevertheless, the phone's APN can be configured manually, all you need are the correct settings from your mobile operator and you're good to go.
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
edumazieri said:
Ok since you guys told me i can go ahead and flash any country ROM i just did and now my device burst into flames and then the flames consumed my apartment.
ok, not. it worked too well actually, i did the kdz procedure on my win 7 anyway, despite the errors when reading device info, and it took like, 1 minute, rebooted, took like 2 minutes on the android screen then it came back, with all my data still there... i thought it didn't do anything but... its now version 2.2
i tried z4root, worked ... got the superuser app and.... i'm happy ^^ thaaaanks!
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
Glad that it worked Install the Amon_RA's recovery!!! Many ROM's for OO won't support clock work I suppose. Amon RA's recovery is neat, I've been using that from the time I had an HTC tattoo.
For your Custom Recovery.... http://androidforums.com/getitnowma...ry-optimus-one-p500-thunderg.html#post1896517
edumazieri said:
anyway about the custom recovery thing..
i'm going to install the one in that post you gave me...
but i read something about the best one being clockwork something...
shouldn't i go ahead and install that one?
or can i do everything i need with this one you guys linked?
Click to expand...
Click to collapse
You can do anything you need with ThunderG. Now that version 1.2 supports backup and restore of ext4 partitons (a feature you don't need if you don't plan on installing a custom ROM... but you will, eventually ), it is complete.
Moreover, in ClockworkMod's first topic says: "This recovery will not allow you to flash every ZIP file". ThunderG does, if you choose to allow flashing of unsigned zip files. Sometimes this is useful.
Peeeeeerfect
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Simple as that =D
Although there are some criteria with the sd card or you'll get unmounting problems.
Use a class 4 or higher card
format with fat32
I've never officially tried this method but its apparently supposed to help
allocation unit size: 64kb when you're formatting
edumazieri said:
Recovery installed, LOL ROM installed, all fast smooth and error-free.
no more screen touch lag, it's soooooo much faster now, overclocked, i have yet to test my emulators but i can only guess they're gonna be at least 150% better lol.
thank you all very much for taking the time to help me ^^
ONE LAST QUESTION: I PLAN ON BUYING A NEW SD CARD, JUST PLUG IT IN AND IT'LL FORMAT THEN CREATE THE NEEDED FILES THEN I INSTALL STUFF BACK ON IT, SIMPLE AS THAT?
Click to expand...
Click to collapse
So, how does it goes?!
I´m brazilian too, got a brand new LG Optimus One from ViVo, and a want to know if you´re having any troubles with conections, calls, internet, 3G etc.
OK, id did the flash
I´m afraid that if flash any custom rom, it will break or cause any misfuncition of the 3g service.
Any idea?!
== Updated
Ok, I´ve flashd it with KDZ and the log show´s thats all ok
"14:34:45 : ===FINISHED=== "
BUt its taking like FOREVER to start... almost 30min on android screen. Is this normal?! Should i restart the phone?!
leave it some more time , try shaking it ...
shake trick sometimes helps
Help please..
I did as instructed in the step to step procedures. kdz posted finished but my phone is still at the yellow screen..i did shaking but nothing happens..Is this normal?..SHould i wait..
Related
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
anyone?
Firefly137 said:
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
Click to expand...
Click to collapse
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
sweetbinodray said:
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
Click to expand...
Click to collapse
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Firefly137 said:
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
Click to expand...
Click to collapse
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
sajjan said:
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Click to expand...
Click to collapse
1. thank you
2. must i go clockworks?
3. MTN is gsm i think... i was just wondering is it is going to be a issue since MTN need to allow update if i wanted to update my phone through pc suite or lg tool.
sweetbinodray said:
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
1) ill try that rom
2) everyone seems to say back up 1st.. so i did but as i say i cant back up sd-ext... so is this just if i have partitioned?
and how can i fix the fact that i cant get onto my SDcard when in recovery... must i use clock works instead?
are you saying i must not back up?
hehehe
Look, your operator has better things to do than implement FW version checking. GSM is a standard stuff, either the phone talks to BTS or does not.
try clockwork....your 3rd question is answered above
Chapter 1: The Foolishness of the User
Hi, I have the korean version of the optimus one(KU3700). It was on gingerbread(2.3.4) stock. I was trying to root it by downgrading it. I entered "adb reboot recovery" and I'm stuck. I tried to reflash it by going to emergency mode with the button combinations using the KDZ updater with this
"csmg. lgmobile. com:9002/swdata/WEBSW/LGKU3700/AKTFBK/KU370040_00/KU370040_00.kdz"
and it worked without any errors but when it when it came up it was still on recovery mode. Is there any way I can change the phone mode to the regular mode
Chapter 2: Journey to Salvation
For anyone who has this korean optimus one, after days of searching, I've found a web site that gave me hints to solve the problem. I just needed a different kdz file and I got it here:
h t t p://sirospace.tistory.com/category/Android%E2%97%86
popped it in google translate because I'm Filipino and can't read korean.
Downloaded the froyo kdz and flashed. I hope this can help other people stupid enough to play with their phones by typing random commands without knowing what it does, like me, LOL...so happy, now it's time to root
Chapter 3: False Hope
OK so I have successfully unbricked and rooted my KU3700, now The problem I have is installing a custom recovery on this phone, none of the images I try work.
Recovery images I have tried are as follows:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
Every time it finishes and reboots, it gets stuck at the LG logo.
Chapter 4: Wisdom Within
Found the problem. The images above are for the P500.Even if the KU3700 hardware is similar to the P500, flashing firmwares made for the other model will result in errors. The same holds true for custom recoveries.
Chapter 5: The Plea to the Gods
I've contacted drellisdee and submitted the files needed for custom recovery creation for the KU3700.
Just waiting for the flash image now. Thank you everyone
Chapter 6: The Forgotten
It seems drellisdee is busy right now. I'm a windows user and knows nothing about programing. So if anybody can help I'm sure the KU3700 community would be greatful. I've attached the files I think are needed to make a custom recovery.
Chapter 7: Quest for the Custom Recovery
I got tired of waiting. So as a windows user with no experience in programming, I did a lot of copying and pasting, I managed to port clockwork mod using virtualbox following this website:
h t t p://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
So I have got a bootable and flashable custom recovery but nothing works yet. I still need to configure it according to the device.
I have uploaded the image and the build files. Please help me configure it and tell me what's wrong. I really don't know that I'm doing
PS: you can try flashing the custom recovery by doing "fastboot flash recovery /Path to/recovery.img and you can go to recovery by using android terminal and type "boot recovery". It will boot, but that's that LOL. Take out the battery to boot to normal mode.
Chapter 8: The Holy Grail
LOL, I found the answer again. I was so frustrated that I kept squishing the phone in recovery and found out that it was just a button configuration problem. A bit of research and I found out that I can toggle it by pressing volume up and volume down at the same time. WOOHOO!!! Custom Recovery at last
Chapter 9: Invasion of the ROMS
And here at last, the user is retired. But the adventure is far from over. It is foretold that the creation of the Custom Recovery will begin a new era. The key to open the gate has been found. So our hero will await the invasion of the ROMS<background music...> END
you can see at
tinhte.vn/threads/908874
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
vidgen13 said:
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
Click to expand...
Click to collapse
yes i see.but i'm newer android.i only send you link to fix
i hope have a pro android to fix your brick
This is just a shot in the dark because i didn't understand what you did entirely : have you used the combination to actually recover the stock rom after you flashed with KDZ ? (Home+VolDown+Power)
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
vidgen13 said:
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
Click to expand...
Click to collapse
Are you sure you flashed the right rom for your phone? There's an application that downloads the required rom for your phone according to your IMEI/SN, but i don't know if it works with the korean version.
Yes it's the KDZ file, unfortunately it's the only KDZ file out there for ku3700. Shouldn't have settled for this korean version
why you wanna downgrade the latest version?
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
asmOne said:
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
Click to expand...
Click to collapse
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
I dont get it ,p504,p505,p506 are versions of p500??? And why some of our roms work on those phones?? So by logic this stock work on p500???
Sent from my LG-P500 using XDA Premium App
vidgen13 said:
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
Click to expand...
Click to collapse
this method worked for my working KU3700 when I'm using my 1st KU3700 I also was struck as you and finely I realized there are No custom roms for Optimus one Korean edition (KU3700/SU370) and I had to connect my phone to an Octopus box (lg softwere box) via software box installed the official firmware. if this method not working you have to connect to a software box.
connect to the internet your PC and 1st install Driver and 2nd install the LG update tool. after installation connect your phone to computer and wait a five seconds for comport installation. after install your phone Run LG Update application.
it is connect to the server automatically indicating red line and after search for latest firmware.
if you can Update your phone it is shows Update butten.
Driver
http://www.4shared.com/file/C3BSNx9P/lgunitedmobiledriver_s4981man3.html
LG Update Tool
http://www.softpedia.com/get/Mobile-Phone-Tools/Others/LGMobile-Support-Tool.shtml
Thank you all for the quick answers, but I already have a rooted ku3700. All I need now is a working custom recovery. If someone has the same phone, please tell me which image is compatible
you can appear the emergency mood with android logo.
it means you have an Empty phone. your Os was been erased. You have to connect your phone to Octopus software box and box server has you original Os for your IMEI. this is the only solution. if you will able to solve this problem without a Software box please inform me. we can open a New Thread for Korean edition.
(ku3700/su370)
I already got out of the emergency mode without an octobus box. It's really simple, you just need to use a different kdz file. The hard part was looking for the kdz file. I have 3 kdz files. KU370017(froyo), KU370033(gingerbread-rootable), KU370040(latest one from LG, gingerbread-unable to root). Just flash with the KDZ updater. I'm on the second firmware because I can't root the latest firmware. To root it, I used super one click(latest version, use zerg rush option). Now I'm just waiting for a custom recovery from drellisdee so I can use custom roms. When I get it, I'll ask him if I can post it so we all can have uber phones LOL
Updated the thread. Can somebody help?
vidgen13 said:
Updated the thread. Can somebody help?
Click to expand...
Click to collapse
If you have flashed a working clockworkmod you can enter into clockworkmod via ROMManager (search in google play aka market). In ROMManager you have "reboot to recovery" option in case you want to go to recovery to flash something. Also you can try to flash from ROMManager a custom recovery (5.0.2.0 for oldBB or 5.0.2.7 for newBB), try to choose to phone model LGP500 oldBB, try and test if it's working. Wish you luck.
Thanks but I already have a working recovery. I just need some ROM makers now
vidgen13 said:
Thanks but I already have a working recovery. I just need some ROM makers now
Click to expand...
Click to collapse
Have you tried CM7.2? if your phone is very similar with Optimus One i doubt it isn't compatible with your phone.
If your phone use 2.6.35.10 or 2.6.35.14 kernel you can give a shot to try CM7.2 on your phone, but before try this make a backup first.
Check this thread Post Your CyanogenMod 7.2.0-RC1 Nightly Questions HERE!! for CM7 custom rom.
yep, it doesn't work. Is there a tutorial for building cyanogen for unsupported devices? All I can find are tutorials for supported devices. I've already got the source code from LG. The problem is just incorporating it in the cyanogen mod. I wish this phone had more users LOL
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
i have been seeing a lot of threads about rooting this phone, but, they all have windows scripts, even the thread that is said to have a runme.sh does not have it in any of the links that i unzipped - only a runme.bat, but yet, people keep mentioning a runme.sh in it... also, i really don't see any one lying out the steps for doing this with linux.
i'm a noob, and dont really know much about this stuff, but i've done this ONCE before with a galxy exhibit, but it was very easy, i just copied a file to the phone (stock rom?), rebooted into recovery, told it to recover from that file, and i was done.
i have no idea how to do it with my new phone, and so i'm wondering:
1: where can i find the files i need to do this with linux - i just want root, nothing special
2: where can i find the steps necessary to do it - in the easiest manner possible?
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
any help is appreciated.
sentientsystem said:
3: it says i have droid 4.0.4, ICS, but every one who talks about lg l9 p769 says its JB, so, thats a bit odd...
Click to expand...
Click to collapse
Your phone is running ICS 4.0, that is the version which it shipped with. Pretty much everyone on here has upgraded to JB either with software update on the phone or they have manually updated with the offline KDZ flash method.
I dont have any experience in linux so I cant help. I hope you can get your phone rooted!
Sent from my LG-P768 using xda app-developers app
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
sentientsystem said:
i just started to restart my phone into recovery mode to see if i could put cyenogenmod on it without having to root it first, and it's saying "software upgrade ... please wait while upgrading...", so, i guess it's upgrading to JB right now... i'll see shortly.
but even if it does upgrade to JB, i still wouldn't know how to do it on linux. i figured there would just be some files to download, and a sequence of adb commands that i could type into bash, but, i'm kinda lost. i guess i'll wait and see if it upgrades to JB before asking more questions.
thanks.
Click to expand...
Click to collapse
You would need wine and then set it up...
Sent From My Xperia Themed P769
well, i tried that "LGpwn" and it didn't work, as well as a fake lg-recovery app. i figured out that i've got a "10g" phone (P769 V10G ICS). i'm not sure what the next step is. some one mentioned downgrading to JB... is there some where you can point me to for that???
i've GOT to get this t-mobile junk off my damned phone... i've even TRIED to install cyenogenmod, but i can't figure out how to get my phone to go into recovery mode (NOT factory rest) - i've tried volup+power+home and volup+power, and neither seem to be working.
Setup a sandbox, windows xp. LG uses windows, no other way to root as of right now for the t-mobile version.
Sent from my LGMS769 using xda app-developers app
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrade to a samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
sentientsystem said:
yeah, it's starting to look like i'm gonna have to try this with a virtual machine, or, pay some one else to do it, or, go get my money back and downgrad to an samsung galaxy exihibit (not sure if the new model of that phone is just as easy as the exhibit 4g, but, it's screen is about an inch smaller than the lg, and they're all 3 the same price, so i'd rather keep the lg).
just out of curiosity, how do you get this phone to boot into recovery mode? you don't have to root it for that, or have windows, right? you just hit the right keys on the phone, right? i couldn't get it to work, but, maybe i was doing it wrong. and, if you can go into recovery, does it have to be rooted to use a cyenogenmod image, or will it not really know the difference?
thanks again. i'm sure this thread may help other noobs as well.
Click to expand...
Click to collapse
Option #1
If you are rooted on stock T-Mobile 10e or 10g ROM and have the CWM installed from this thread:http://forum.xda-developers.com/showthread.php?t=2095825 follow my instructions.
Place one of these CWM ROM images on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2136204
Place this JB radio firmware from T-Mobile 20d ROM on your SD-Card:
http://forum.xda-developers.com/showthread.php?t=2256350
Power off the device.
After power on the back/menu capacitive buttons will flash repetedly. Press Volume down while the lights are flashing and the phone should go into recovery.
Flash the ROM first.
Flash the radio second.
Reboot.
***Notes***
1.) 20d is the latest T-Mobile, 21b is the latest Wind Mobile. Both work.
2.) 21b is lighter/faster but has no wifi-calling.
3.) 21b will require you to manually enter your APN settings for cellular data and MMS. Be sure to write down your APN settings before flashing this ROM.
4.) Some users say battery life sucks on JB. I notice that 21b is better on battery life than 20d.
Option #2.
In Linux install a Windows VM and follow the standard instructions here:
http://forum.xda-developers.com/showthread.php?t=2173465
Use KVM with a GUI or even easier use VirtualBox.
I'm a die hard linux geek too. I even run linux at work while all of our msp software was written for windows. You are better off just running an old copy of xp inside virtualbox trust me its just easier that way. You can use adb if you like (its the same thing the windows users use in their batch files and just rewrite the bash script, but you will save yourself lots of headaches just using virtualbox. -- my .02
Sent from my LG-P769 using xda premium
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
# what's the difference between unlocked boot loaders and being rooted?
# do you have to unlock the bootloader to get root access?
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
My bad. I should have read through your original question all the way before posting. I see that you are not rooted.
If you are on 10e ROM you can root in Linux:
http://forum.xda-developers.com/showthread.php?t=1990705
It will require rewriting the batch script as a Linux shell script. It is possible but nobody has done it yet.
If you are on 10g you will need Windows. I have also answered your questions below.
sentientsystem said:
i'm not exactly sure what the end result of your instructions are, as i assumed it was to BE rooted, but the first line of your post says "if you are rooted ...", so, i'm guessing you're telling us how to ... unlock the boot loader?
by the way, that reminds me, i still haven't come across any posts on this site that tell noobs:
# what's the unlocked boot loader FOR - why do you need this - what does it do?
It allows you to boot an un-signed kernel. You can boot custom ROMs basically.
# what's the difference between unlocked boot loaders and being rooted?
Root allows you to `su -` to the root user and own the whole system.
# do you have to unlock the bootloader to get root access?
No.
all some one like ME needs, is root access, so that i can edit the /etc/hosts file and test mobile compatibility of web apps on the development server before making them live - and to remove t-mobile damned bloat-ware. i hope this helps others who are trying to understand the basic concepts of getting control over the phone they paid money for.
thanks again. now to find a winxp image to load into a virtual machine...
Click to expand...
Click to collapse
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
sentientsystem said:
yeah, the one t-mobile is selling now is a v10g - so, it's time to play with virtual machine, and hope that usb-access is passed through from ubuntu to the VM.
thanks for answering the other questions. i think this essentially sets things straight.
peace! \m/ (>_<) \m/
Click to expand...
Click to collapse
Welcome!
I know that a long time ago when I ran VirtualBox in Ubuntu there was something I had to do to allow USB access to the VM.
Here are the current instructions directly from Ubuntu:
https://help.ubuntu.com/community/VirtualBox/USB
Good luck.
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
sentientsystem said:
hey, i've got 1 more quick question: is there a way to simply load a pre-rooted ROM onto it, like i did with my samsung? where you put it onto the device, the go into recovery mode and choose the pre-rooted ROM? i haven't seen any mention of that, so i'm not sure if that's an option...
also, how the hell do you make this boot into recovery mode? i still haven't been able to get it to do that?
thanks \m/ (>_<) \m/
Click to expand...
Click to collapse
Yes you can flash a pre-rooted image. They are available. Use the search?
I posted instructions on the first page showing how to boot recovery.
that's great news - that's all i really needed - i didn't see them before, at least, not conspicuously, but i'll search around again.
and, i must have some how missed your instructions, i'll look again.
thanks!
kevev said:
I posted instructions on the first page showing how to boot recovery.
Click to expand...
Click to collapse
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @everyone for your help.
sentientsystem said:
those steps assume i have CWM installed, and i don't. i looked at installing CWM, and it doesn't have an official recovery app for the p769, and when i went to look at that thread you linked to, it says you must be rooted already. this is the aggravating part of us ignorant people dealing with people who know many things: it appears to us that you have to do some thing that requires that it is already done before you can do it. it doesn't make any sense - just a bunch of circualar requirements, with no beginning.
so, let me ask this a different way: how do i reboot into recovery mode, on a STOCK LG P769 v10g? the lights do not flash, and i'm assuming that is a CWM feature - but CWM is not installed - this is COMPLETELY STOCK - fresh out of the box. so, what do you press, when turning it on, to make it go into recovery mode, so that you can recover from a pre-rooted rom (which i am still looking for)?
i just want to "recover" to a pre-rooted rom, that's it, so that i can delete bloatware and edit the /etc/hosts file (for web app testing). this thread says you cant do this for LG phones http://forum.xda-developers.com/showthread.php?t=2174767 - i got the same result the last guy got . trying to borrow a windows computer now...
also, does any one know if it is safe to put a jelly bean rom onto a device that was using ice cream sandwich? is there a difference between the versions that would brick the device? is it not recommended, or is it highly recommended?
thanks again. sorry for all the confusion.
you know, as a side note: it may help more noobs understand this stuff if there was a sort of simplified glossary, perhaps as an official site thread, for the orientation of noobs, that would give an outline of the basic concepts, AND their order of operation. exmaple: "rooting is when you... bootloader unlocking is when you... CWM is for people who want to... you MUST do A before you can do B and then you can optionally do C if so desired...". that would help them understand where to START, then, where to GO next.
Click to expand...
Click to collapse
I've decided to help you out This page will give you some more info on the P769 and several kdz (roms) for the P769
The fastest way to root is to flash the V21B kdz (this is the Jelly Bean version for Canada) using this guide, http://forum.xda-developers.com/showthread.php?p=36351786
The reason why you want this rom is because it has a vulnerability that is easy to exploit with Jcase apk
Once your followed everything (and rooted), install Super Su and Busybox
Next install artas182x second init CWM (in case you can't find it on his page, the link is here )
Note: you will see blinking led lights when you see the LG logo (booting up) appear after a couple of seconds. To enter the CWM press the vol (-) when the lights start flashing.
After you installed Artas182x CWM you can recover from someones clockworkmod backup.
following info from Cmahendra's thread
Note: only restore CWM backups from P769 versions or MS769!!!!
Or check out the V10B (MetroPCS "JellyBean") CWM backup
Now the only 2 reasons to unlock the bootloader are:
1. Install a safer and better CWM
The reason why is because Artas182x CWM is a second init (bootstrap), so if you mess around with a busybox apk and something goes wrong or you remove a file that is required (for CWM), it will stop operating. You will have to reflash the kdz or fix what you changed to get it working again.) I've had this problem several times while messing around with different busybox apps and etc.
2. Custom roms
(which you stated you are not looking for) not worth talking about right now.
Answer to questions
The only pre rooted roms are clockworkmod backups, lol
The default recovery is useless to us (unless you feel like solving the problem)
Flashing back and forth (ice to jelly) comes with risk, the program used on Windows to flash is buggy at times. The best way (in my opinion) is to flash only when really required and mostly restore from clockwormod backups. The device is actually hard to hard brick, but it will require at lot more knowledge to get your device running again.
---------- Post added at 07:23 PM ---------- Previous post was at 07:16 PM ----------
sentientsystem said:
well, borrowed a windows computer and i got it rooted, but, i found out a few things about this exact model: it has no "boot to recovery" option, by default - it's locked down pretty good. you can not use any of the other root methods on this model, and you can not do it from linux (f*ck me).
so, that long-winded fake-software-update-while-switched-out-a-hex-edited-binary-file is the ONLY way for this exact model, it seems...
but, at least i can confirm that this exact model CAN be rooted at all
now to remove alllllllll the bloatware... and look into this CWM more and learn more about what is actually IS and WHY so many people install/use/flash it...
hey, does any one know if cyenogenmod ever got themselve's an "app/marketplace"??? that was one of the draw-backs to installing it, last i checked.
thanks @all for your help.
Click to expand...
Click to collapse
So what version are you on right now
Ice? Jelly?
i'm still on ICS for the moment. still trying to understand what i need to do next. re-reading your post for the 2nd time, and all the threads it references. making sure i don't screw any thing up. thinking about upgrading to JB, and trying this CWM. and looking into this "cyanogenmod" some more, to understand why i never see any one on this site mention it, and what all these "other roms" are about. lmao, like i said, i'm way new to this . it's a lot to take in, even for a web developer .
thanks \m/ (>_<) \m/
(FlashKDZ/Root/Recovery/Hiddenmenu/troubleshooting) (noob2noob guide)
Okay, this is my first thread on XDA, the reason I'm making it is there is a lots of problems with progressing to lollipop. All of this is already mentioned in the forum, but this way it is much easier since it is all at one place. If I'm doing something wrong please warn me with explanation how to resolve the issue. If I'm posting in wrong forum section please move my thread where it is supposed to be.
1. Before doing anything check if your phone is ready to get updated:
1.1 Do you have a stock Kitkat rom or at least a rom that is kitkat based, since there can be a problem with partitioning if custom lollipop rom is installed
1.2 Create a backup. Don't be lazy LG backups will not help you since they can't go from kitkat to lollipop, don't try to do it from recovery because you will lose custom recovery. Copy your files from phone including extracted contacts, and back it up online with google or some other backup providers.
1.3 Check if you have a latest touch firmware, because you might have a problems after installing lollipop and it will be hard for you to check for updates since your touch might become useless.
1.3.1 To check it go to hidden service menu by typing 3845#*802# and go under HW Device Test, then Touch Test then touch firmware version and write everything down. After that go to touch firmware upgrade and after 15 seconds compare the touch firmware version values with those you written down.
1.4 In hidden Menu you can also go to wlan test then ota setting to check if it is disabled on your phone. After that check again if there is OTA updates for your phone, and also check if there is PC suite Update.
1.5 Check your phones version if it is D802, D800 or something else, and check which rom you have installed. You can do this in settings about phone or if you are happy about hidden menu found, go there and into settings then version info. This might not be interesting or fun to do, but it will save you the trouble if something goes wrong, because you will know what to ask.
1.6 Last but not the least, before starting to flash fill up your battery, i've read some posts that say there are problems with wrong capacity shown, and a lots of battery drain problems, and only solution till now is to have a full battery on start.
2. You will need LG FlashTool and of course installed drivers for your G2 on your PC.
All of that you can get in the thread by @quangnhut123 .
2.1 Just a bit of precautions, don't forget to always copy a kdz file in to Flashtool folder and then start a tool. All should look the same as in that thread, except you should always use CSE method because with this method you will install kdz from scratch, removing everything from the phone.
2.2 You should find the kdz file which suits for your phone on site . You can check for kdz by typing in imei in check new firmware section or find the one for yourself by searching the site. v30a is lollipop open while v30d is for branded G2's.
(I've read that this site is not allowed by Xda moderators, so if I can't post it please give me info on where should we download kdz's from).
2.3 I think it's all pure logic now but lets say it one more time. You have downloaded kdz file, and put it inside LG Flashtool folder. You should now start Flashtool and get your phone into Download mode. To do this you need to hold volume up button on turned off device and connect usb cable while holding volume up. Now just cse flash.
2/3 This is troubleshooting step, if you have a problem ask and i hope this great community will help you like they did to me, and ofc I will do my best to help.
3. Now we go to rooting.
Here is the thread by @avicohh which worked for my D802.
Just follow his step by step tut and you will have a rooted phone
3.1 The only issue that might happen here is you are stuck with # and adb waiting for your phone. To resolve this just go into download mode manually.
4. Okay rooting done, now let's go to custom recovery install
It's easy as installing an app from google play by @bender_007
4.1 After installing it open the app and follow the on-screen instructions. If it fails for the first time, try it few more times, it will eventually work. (OFC. I didn't install it with only one try).
4.2 To get into custom recovery hold volume down and power button till first LG sign shows up, then release both buttons and quickly press them again. It will ask you do you want to do factory reset, press yes and yes again, and it will get you to custom recovery if you installed it.
4.2.1 If you factory reset your phone that means you didn't install recovery correctly and you will lose your data, but again that should be no problem since you have that backup from the start.
Now optional steps:
5. Install system app remover to remove bloatware from your phone. You can do it manually but this way you will have those apps backed up.
6. Next suggestion is to install a few mods if you need them. In my case I had to have a Plug and pop, since it is lost from Lollipop and I loved that feature. Here is a thread on how to install that mod by @p_a_r_s_a7
//That's all, if you have any questions feel free to ask, since there is no dumb questions, but also try to read carefully before//
Thanks to:
@quangnhut123
@avicohh
@p_a_r_s_a7
@bender_007
A lot of others whose names i can't remember. If anyone else needs to be mentioned PM me and i will add you in this section.
I will add pictures and stuff if needed
Thanks, good all-in-one thread, + easiest methods. Ill recommend it‚to others
This forum is such a mess that a thread like this is like a fresh breath of air. Every advice given on other threads references something that you should already know how it's done, or you should already have done to your phone in the past and have a certain version of it, or non-working tools that are only around for a few months until an update makes them unusable.
No wonder that most of the first-page topics, including pinned ones, have the word "brick" in the title. This should signal the forum moderators that something is wrong around here.
My phone is stock international sim-free G2, never rooted or otherwise modified and yet no one was able to offer a coherent solution of how to update to Lollipop, until your post.
So, thanks for this thread.
Thank you, that is exactly why i made the thread. Every one of those threads has everything explained, but you need to search theough 150 pages to understand how something is done. That's why i wanted to make a thread with all explanations made in a single post and to make it noob friendly since the worst thing that happens in other threads is answer like use a search you have it somewhere.
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
seyio said:
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
Click to expand...
Click to collapse
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
[email protected]$o said:
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
Click to expand...
Click to collapse
Do I flash KK bootloader or root before I update through ota?
seyio said:
Do I flash KK bootloader or root before I update through ota?
Click to expand...
Click to collapse
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Problems with flashing KDZ
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
sankeerth24 said:
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
Click to expand...
Click to collapse
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
[email protected]$o said:
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
Click to expand...
Click to collapse
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
I have seen that some guys who had the same problem resolved it with disconnecting from network
Sent from my LG-D802 using XDA Free mobile app
sankeerth24 said:
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
Click to expand...
Click to collapse
http://www.1x1a.com/fixlg-flash-tool-stuck-at-2.html
Or maybe try this. I havent tried it so i cant promise anything but if you want you can try. Hope it helps
[email protected]$o said:
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Click to expand...
Click to collapse
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
seyio said:
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
Click to expand...
Click to collapse
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
[email protected]$o said:
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
seyio said:
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
Click to expand...
Click to collapse
its a good update, not that buggy, and be sure to fully charge your battery before the process. you should try europe open or something like that, but there is no german or uk release yet and some guys suspect it is slowed down because they found out bugs in other versions
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
fernievidal said:
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
Click to expand...
Click to collapse
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
[email protected]$o said:
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
Click to expand...
Click to collapse
I believe mine is an international version. Where it came from, well, I'm from the Philippines and I got my phone from a local telecom, Globe.
The flash tool said that it was successfully upgraded, but judging from the phone's behavior I think there's something wrong. My phone never started successfully, and I got stuck in the LG logo.