Related
Hello everyone.
I would like to see if anyone may be experiencing the same issue and if anyone may have found a cure.
I am experiencing data drops on all roms. After a fresh install the rom works perfectly. Sometimes for a day sometimes for several days I will experience no problems. After a time I will no longer have any data connection at all, the 3G or H symbol is there but no activity. I have rebooted, reflashed modems, turned phone off in airplane modes, and toggled data. Sometimes this works but for the most part it is only temporary. I have experienced this problem on Trigger, Bionix, flagship, loki, and now stock jfd. I dont know what else to do. Is there a way I could have messed up the hardware of the phone? Any suggestions?
(I experience this in many different areas, as to rule out just poor reception, I will often have full signal with no data.)
Thanks,
I did have this on Axura and TW Roms.
I moved to Trigger and did a clean install, no issues at all with data drops since.
You can toggle airplane mode on/off.
You can toggle airplane mode on/off.[/QUOTE]
Trigger did last the longest before data dropped, about 3 days. I try toggling airplane on and off several times. When my data drops its off for hours I have even waited a whole day then I usually end op relashing back to stock and starting over. I stayed at JFD for 1 day and data dropped so im confused.
thanks for response!!
If it were me, this is unacceptable.
I would verify no issues with T-Mo (data cap/bill issue)
Assuming that is fine, I would make a copy of both internal/external to my pc, after a nandroid and Titanium backup was made.
I would then format both internal/external memory cards.
I would then power off and get use ODIN to JFD.... root.... cwr... flash your fav rom (maybe trigger final since you said you had the best luck with it).
I really doubt you would have trouble after doing this.
Ill give this a try tonight when i have access to odin. Thnaks for all your help.
Did you ever overclock the phone ? the heat potential of overclocking can have some bad effects on the circuitry. Either way I would get to Stock and do a warranty replacement on it.
oka1 said:
Did you ever overclock the phone ? the heat potential of overclocking can have some bad effects on the circuitry. Either way I would get to Stock and do a warranty replacement on it.
Click to expand...
Click to collapse
I have overclocked the phone but never really thought about that as a potential problem. The problem is intermittent; it works fine after a flash but then drops off as i use the device. Would this cause the same issues??
Once again Data has dropped from Trigger 2.7 edt. I dont get it. There has to be some kind of hardware issue. Ive had full data from my last post 2 days ago.
I am not at data cap limit, and I have paid my bill. Data was just working 2 min ago, phone started to lag, rebooted now no data. I have flashed KA6 and KB1 modems twice each, rebooted in flight mode, toggled data 10 + times.
Anyone with any other suggestions before I turn this bad boi in??
thanks,
FIXED: check out post #17
I didn't think posting this in each GB Rom thread and kernel thread would be appropriate so I'm starting here. Thanks in advance for any feedback!
Okay......After doing countless and wasted hours of searching and coming up empty handed, why is it that only a few of us are having the WIFI issue on the Gingerbread ROMs? It doesn't matter which ROM I use as soon as the screen cuts off, BAM, no WIFI or 3G data. And yes WIFI sleep policy is set to never and I've tried turning on Better WIFI performance and I've even tried every kernal out there, nothing works. FROYO ROMs are working fine so it's got to be either the Gingerbread ROMs or the Kernels.
Either way I'm okay with the issue not working (yet) and I understand that HTC hasn't released the source for the GB Kernel yet. All I would like is some clarification from the people that build these ROMs and Kernels that the WIFI is not working yet. I understand if you're in a 4G area, after all 4G is much faster than the WIFI anyway but for those of us not in a 4G area yet WIFI is king when at home or at work. So if the developers are using 4G constantly I understand the WIFI neglect, but I really don't think it's the developers. These guys are too smart to let something like that slide by! Can someone shed some light on the issue? Thanks again in advance!
This is not an issue with the leaked GB roms themselves or the latest kernels, because the wifi is working great for most people.
It is going to be helpful if you list which rom, kernel, and radio you are using. I did have a similar problem one time, my wifi was going to sleep when the screen turned off and went idle.
It had been working fine but I tried to take a shortcut and reflash the rom without wiping data because it was the same rom. After attempting that which was a bad idea but more of an experiment/learning session for me, I had exactly the problem that you stated.
After wiping my phone properly and flashing the rom, the problem was gone.
I have been running BAMF sence 3.0 with the MR2 radio. I tried MR2.5 and had some different small issues, MR2 has been working Great. Currently with BAMF 3.0 RC 3, the MR2 rom and the latest dreamKernel, everything is running perfectly, at least everything I use or thought of using.
The background data is extremely important for me because I communicate exclusively with my girlfriends using IM services such as gtalk with Trillian. So I wouldn't be able to run gingerbread if it wasn't working REALLY good.
Here's the thread that I use often as a resource. It discusses some issues similar to what you are dealing with, and is update very regularly
http://forum.xda-developers.com/showthread.php?t=1086518
I'm having an identical issue to the OP. Running BAMF GingerREMIX 2.1, Imoseyon's 3.3.8GBTest+ , MR2 radio.
Wifi just disconnects when screen is off. When I turn the screen on, i can see the wifi indicator is all black (similar to no bars). Once it's on for a second or two, it lights up again, and I get whatever notifications I missed due to no data(email, etc).
Ive done the 3x data, cache, and dalvik wipe before flashing the ROM and before flashing the Kernel. It's absolutely DESTROYING my battery life. Since noticing the problem, i've re-wiped and re-flashed everything, didn't help.
Thanks for the response...I'm stumped then because I have tried every combination of kernal/ROM that is available out of the Gingerbread leaks. I recently last night tried BAMF Sense 3.0 RC3 and GINGERTH3ORY V4.5.1 and BAMF 2.1 Remix again along with both MR2 and MR2.5 radios. Nothing worked so I went back to the reliable Perfect Storm 1.5 ROM and left my radio at MR2.5
Any suggestions? Thanks for the help!
theaustins513 said:
Thanks for the response...I'm stumped then because I have tried every combination of kernal/ROM that is available out of the Gingerbread leaks. I recently last night tried BAMF Sense 3.0 RC3 and GINGERTH3ORY V4.5.1 and BAMF 2.1 Remix again along with both MR2 and MR2.5 radios. Nothing worked so I went back to the reliable Perfect Storm 1.5 ROM and left my radio at MR2.5
Any suggestions? Thanks for the help!
Click to expand...
Click to collapse
I'm having no issues with gingeritis 1.0 (Not the 3D Alpha), and lean kernel 3.4.0. Did you try those?
Wayloss said:
I'm having no issues with gingeritis 1.0 (Not the 3D Alpha), and lean kernel 3.4.0. Did you try those?
Click to expand...
Click to collapse
I did try the gingeritis 1.0 3D with dreamkernel but not lean. Maybe I'll give that a shot this evening but I'm not holding my breath...lol I've tried almost everything and known combinations that are working for others and all the wipes I can muster, nothing is working.
Okay I've been trying Gingeritis 1.0 3d with the lean kernel for a few hours hours now. When my screen turns off I will receive emails for a few minutes but then I stop receiving them until I wake the the phone up. Once i wake the phone up i start receiving messages likevi just turned it on from a good nights sleep. Does anyone know what's going on?
Sent from my ADR6400L using Tapatalk
I've actually had this problem also ever since i moved to the Gingerbread. When the screen turns off and i turn it back off after awhile, the WiFi seems like it was sleeping the entire time. I get all my notifications when i turn the screen back on. And i do believe this has been killing my battery life a bit. I have wiped before i flashed. I tried it with the original GB radio/MR2/MR2.5. I've flash different kernels. Wifi sleep is set to never.
Note: I tried running an app such as Pandora on while the screen was off and only in situations like this the WiFi doesn't have the problem.
tethering is ****ed up as well in gb, screen off, no tether, screen on and everything is okay. personally i think that something is ****ed up at the kernel, i switched back to froyo and problems went away.
For the record.....if I set wifi sleep policy to never when plugged in I still receive notifications instantly but it's through 3G because when I wake the phone 3g is active instead of wifi.
Sent from my ADR6400L using Tapatalk
This is something I've brought up before too, but nobody addresses it because there probably isn't an answer about a whether it's the kernel or rom. I've just come to terms that I can't use wifi. For those who are suggesting we didn't clear data appropriately, that's not the issue. Most of us who have this wifi problem have been determined enough to try multiple clean installs to get to the bottom of this issue.
jschecter said:
This is something I've brought up before too, but nobody addresses it because there probably isn't an answer about a whether it's the kernel or rom. I've just come to terms that I can't use wifi. For those who are suggesting we didn't clear data appropriately, that's not the issue. Most of us who have this wifi problem have been determined enough to try multiple clean installs to get to the bottom of this issue.
Click to expand...
Click to collapse
Shall I throw another quirk into our problem?............... I flashed CM7.1 RC1 early this morning. This is the best ROM I've put on my TBolt yet. WIFI seems to be working flawlessly except for right after the initial install it wouldn't download anything, through browser or even open the market. After a reboot, I'm going strong. I am receiving messages and data when phone's screen is off. I'm beginning to think that it might be a Sense 3.0 problem....any thoughts from the peanut gallery?
The problem with GB is that it is not official. The ROM is not final (or has been ported from a different phone), kernel is not final, and neither is the radio. We shouldn't be surprised that a lot of features don't work properly. Now cyanogen do their own Roms and kernels basically from scratch, and maybe that is why it's working. GB was fun to have, but i just switched to Froyo for faster 4g speeds, ability to tether properly and better battery life. I'll wait for the proper GB before switching again.
Yeah not Gingeritis 3d but the normal version.... I've noticed also that it seems settings don't change, Like I have turned off Haptic feedback yet still get it when i type on the keyboard, and still get weather sounds with the sounds turned off. This is every time I flash even with 5 wipes. Settings don't seem to stick.
Wayloss said:
Yeah not Gingeritis 3d but the normal version.... I've noticed also that it seems settings don't change, Like I have turned off Haptic feedback yet still get it when i type on the keyboard, and still get weather sounds with the sounds turned off. This is every time I flash even with 5 wipes. Settings don't seem to stick.
Click to expand...
Click to collapse
For the keyboard not turning off haptic feedback, you have to go to the settings in the keyboard to disable it. Settings->Language and Keyboard->Touch Input->Text Input->Uncheck Vibrate While Typing.
WI FI Alternative
And I thought I was the only one having problems with wifi tether on gingeritis 3D. I posted a question in a different forum but no one answered me. So after trying different versions of wireless tether I found one that is working perfectly for me. It is wireless tether v2.0.5. I've been using it for 2 days with no issues and phone screen doesn't have to be on. Now, this may not work for everybody, like I said I tried different versions until I found the right one.
Here is the link: http://code.google.com/p/android-wifi-tether/downloads/list
I hope this helps some of you.
Okay.......!!!!!!!! Thanks to the folks over at theMikMik.com (akaGingeritis ROMs) forums I now have working WiFi with the Gingeritis ROMs. Just download Advanced WiFi Lock from the Marketplace and set it up and you're good to go! Now that wasn't hard was it guys/gals? I've been looking for an answer for so long I can't even remember when I started....oh wait it was the first day that Gingerbread were available by these great developers!!!! Sorry, I didn't mean to vent, I'm not mad just very excited that now I can enjoy these Gingerbread ROMs. So everyone else that's having problems with the WiFi staying connected, download Advanced WiFi Lock from the Marketplace and get your Ginger on!
So is that the free version, or the paid version? You're finding that your WiFi now says connected even if the phone is sleeping? To do some more testing, I fully charged my phone, turned on my WiFi, and connected to my home wireless for 5 hours, just let the phone sit. Used 50% of my battery. Next day, same thing, but had WiFi off, 4g on. 5 hours later, used 15% of battery. Pretty sucky that I can't use my TB on my own home network.
Sent from my ADR6400L using XDA App
xNitebreedx said:
So is that the free version, or the paid version? You're finding that your WiFi now says connected even if the phone is sleeping? To do some more testing, I fully charged my phone, turned on my WiFi, and connected to my home wireless for 5 hours, just let the phone sit. Used 50% of my battery. Next day, same thing, but had WiFi off, 4g on. 5 hours later, used 15% of battery. Pretty sucky that I can't use my TB on my own home network.
Sent from my ADR6400L using XDA App
Click to expand...
Click to collapse
I'm using the free version as the paid doesn't offer any extra features I needed. I left my phone connected to WiFi all night idle, about 7.5 hours, and only used 13% of battery and received all messages. I can't test on 4G so please provide feedback for others.
Sent from my ADR6400L using Tapatalk
Not so lucky. Downloaded and installed advanced WiFi lock. Connected to my home wireless and see the same exact results. WiFi just sucking battery. Still draining at about 10% an hour on WiFi and about 3% an hour on 4g. I'm so confused over this, how is WiFi draining battery more than 4g? Phone isn't even usable on WiFi. Checking battery usage stats as noticed that the phone is constantly awake when WiFi is on.
Sent from my ADR6400L using XDA App
I am surprised that I can't find a lot of people talking about CM7 nightly builds running on the Verizon Fascinate. Anyone out there running a recent nightly? I have already rooted my phone, and am thinking about flashing a nightly, but I want to make sure it's pretty stable first.
How are your experiences?
It's fairly stable. The volume in calls used to be really low but that was recently fixed.
The only major problem that I encounter is that Wifi and Data don't work when they say they're working. All you have to do is switch in and out of Airplane mode once or twice and it should work, but it might get frustrating for some people.
I'm using build 67 with no issues. Loving It.
Sent from my SCH-I500 using XDA App
I've been using the nightlies for quite some time now. As stated, they did have problems, they've pretty much all been rectified - I'm pretty damn picky when it comes to bugs with a phone I use daily, and I have no issues, everything seems to work fine.
Only problem, not sure when this was introduced because I got lazy in updating the nightlies, but somewhere between nightly 35 and when I updated to nightly 68 this morning somebody bundled this "LED Notification Wannabe" crap and I can't figure out how to turn it off - some sources say you can't.
Basically when you get an e-mail or text (every 5 minutes for me), your soft keys stay lit up solid until you view it. Haven't found out how to disable it, not even in the CM7 settings. It's annoying as all hell because it basically means my soft keys are lit up all day.
Though yeah, aside from that, in any of the nightlies I've used pre-36, I haven't had any issues - I mean yeah, I had the volume problem and the SD card wipe, etc., but all of that stuff was rectified a long time ago. Bug free, very stable nightlies...but don't count on it I guess?
Syndacate said:
Only problem, not sure when this was introduced because I got lazy in updating the nightlies, but somewhere between nightly 35 and when I updated to nightly 68 this morning somebody bundled this "LED Notification Wannabe" crap and I can't figure out how to turn it off - some sources say you can't.
Basically when you get an e-mail or text (every 5 minutes for me), your soft keys stay lit up solid until you view it. Haven't found out how to disable it, not even in the CM7 settings. It's annoying as all hell because it basically means my soft keys are lit up all day.
Click to expand...
Click to collapse
Sigh*
Go to Settings > Profiles > Default
In the Application groups select each of the groups and click on "Lights mode" set it to OFF. To apply the changes you need to select a different profile and go back to the one you modified (Default in this case)
m0r0n3s said:
Sigh*
Go to Settings > Profiles > Default
In the Application groups select each of the groups and click on "Lights mode" set it to OFF. To apply the changes you need to select a different profile and go back to the one you modified (Default in this case)
Click to expand...
Click to collapse
Ah, okay, most of the other how-tos for this are deprecated (ie. LED disable in places that no-longer exist in CM7 settings, but I also found this, but to no avail for me. I didn't know I had to change profiles at the end. Thanks, I'll try that now, god I hate that so much .
my personal experience with CM7 on the Fascinate: it's half-baked.
phantom ring problem, where the phone continues to ring after you pick it up to speak to someone.
data stops working and you have to cycle airplane mode to have it work again
battery life sucks
GPS takes 10 minutes to hone in on your location.
I just installed powerwashed GB last week and all these issues are GONE. I have to put up with Sense UI now, but it's a price well worth paying to get rid of constant bugs.
I'll give CM7 another shot when they have a good stable mod.
I'm really happy with the all of the newer builds. In the past (back in the days of build 35) I had lots of bootloop issues and freezeups. Pretty much everything is resolved now.
I don't think I could NOT have a CM7 nightly on my phone haha. You should really check them out.
Even if you hate it just restore your backup!
CM7 used to be very sensitive to low signal areas; the data connection would disconnect and not recover. The only solution then was to try airplane mode and if that didn't work pull the battery.
Has this been fixed?
AuroEdge said:
CM7 used to be very sensitive to low signal areas; the data connection would disconnect and not recover. The only solution then was to try airplane mode and if that didn't work pull the battery.
Has this been fixed?
Click to expand...
Click to collapse
For me i'm going to say no, not really. My house is in a low signal area and though its improved I still have to do airplane mode from time to time. Different radios made little difference, though ED05 is slightly better than EC09
Sent from my SCH-I500 using XDA Premium App
For those with data issues try this? I haven't had a problem since.
Obviously replacing Miui with CM7.
OhioYJ said:
For those with data issues try this? I haven't had a problem since.
Obviously replacing Miui with CM7.
Click to expand...
Click to collapse
I did see jt and andmer on twitter talking about this data issue. So it makes sense that there might be a fix for it in MIUI. Where do I find jt's kernels at?
AuroEdge said:
I did see jt and andmer on twitter talking about this data issue. So it makes sense that there might be a fix for it in MIUI. Where do I find jt's kernels at?
Click to expand...
Click to collapse
It could just be Miui, I haven't tried any other roms since I got it working, so it might not work in VGB or CM7. I prefer Miui so once I got it working, I've just left it alone.
I got JTs Kernel from a link he posted on his Twitter account, on the 12th obviously.
AuroEdge said:
CM7 used to be very sensitive to low signal areas; the data connection would disconnect and not recover. The only solution then was to try airplane mode and if that didn't work pull the battery.
Has this been fixed?
Click to expand...
Click to collapse
Arg, I have this problem - maybe had, I haven't been in a long signal area for awhile.
Doesn't matter though, NOBODY around here or on IRC believed me about the issue, they all just said to re-key the phone by switching phones on VZW to fix that problem.
I'm glad to see people have seen the problem outside of just me.
I haven't tried it lately, b/c there's tons of coverage in my area, but in the earlier builds I definitely had that problem when there's barely any coverage (about 105db signal) for a long time, no wifi on, 3G just cuts and never turns back on.
Never thought I'd be happy to see somebody have an issue, but now I am.
But hey, everybody thought I was lying then so maybe it's not an issue at all? Who knows...
EDIT:
The problem was also shown on VGB and PP.
Running the latest CM7 nightly with Glitch kernel. It flies; rarely have stability issues.
One minor and a couple of major issues...
- Notification drop-down stops accepting touch input but can still be slid up and down. Reboot fixed
- Battery life is horrible. It's better with wifi set to turn off when the screen turns off, but I'm still losing about 10% per hour. With the stock 2.3.4 ROM I was able to go 16 hours and only drop to 80%. I've read maybe I need to let the battery discharge completely so that it can calibrate? I'll try that today.
- Cell connectivity is sketchy now. I've had problems making calls. Full bars, then it tries to connect and the bars drop to 0 temporarily, then come back up and the call fails. My SMS send success rate is about 75%, sometimes down to 25%. I've had multiple text messages fail to send and some texts I end up receiving minutes and sometimes hours later. This is a huge problem.
Overall I think this is a great leap forward and the phone is very fast now, but with the battery life and sketchy cell problems I may have to go back to stock.
Anyone have any ideas?
Thanks!
I wish I could get this to be stable, and I understand it's still beta, but I have to go back to stock. If I didn't need the phone and SMS functions to be reliable then I'd stick with it, but I need my phone for work.
I'll keep an eye on how things progress and maybe try again down the road, but chances are I'll be upgrading to a Galaxy Nexus in a couple of weeks anyway. At least then I can use my X2 as a toy and not care about carrier stability.
I think these problems are rare, sorry. I do share the "wifi not reconnecting" but wifi fixer is a work around. This is a super daily driver. There was a screen blackout but I found non-compatable themes to be the problem.
We need a "This works check list kind of thread" so people know what does work. FWIW.
edit
This is the best battery life I have had on any rom.
Yeah, I also had the wifi not reconnecting problem but that was trivial. I'm back to stock now, the last straw was the phone not even reconnecting to 3G, I lost all data connectivity. I could deal with the battery and such, but the cell/data connectivity problems are a definite no-go for me.
skwoodwiva said:
I think these problems are rare, sorry. I do share the "wifi not reconnecting" but wifi fixer is a work around. This is a super daily driver. There was a screen blackout but I found non-compatable themes to be the problem.
We need a "This works check list kind of thread" so people know what does work. FWIW.
edit
This is the best battery life I have had on any rom.
Click to expand...
Click to collapse
Maybe you can start one of those threads.
I also notice a fast battery drain but the rom hasn't settled in yet and it may need more time to do so.
Sent from my MB870 using xda premium
My issues are (minor):
One of my game can not be played (Siegecraft - after downloading the game data, the system ends with "network error") all my other games play fine, so I don't know why.
Gallery app constantly re-starts when trying to view pics. No work around it. If anyone can suggest a good gallery replacement app, please let me know, I tried Gallery Plus (I think that is what it is called) and it also did the same thing.
Major issue (Maybe not an issue):
My wife claims that some phone calls are not going through (it rings from her end, but I am not hearing the ringing on my phone for some reason - I had 5 missed calls listed on my phone). That said, 3 or 4 test calls I made came through without any issues so maybe it is the issue with the ringer not being high enough for me to hear?
Overall, so far, except for the missed calls (which may not be an issue at all) it is a very good daily driver and hopefully after things settle down a bit more it will get even better.
Navigation/Maps/Latitude issue with GPS
When I go into Navigation or Maps or Latitude, especially Navigation, there is a constant message at the bottom of the screen "Searching for GPS".
When looking at Maps, you see the current position but the area is in a fuzzy circle. It didn't happen when I was on stock rooted 2.3.4.
I did see an option to use an external BT GPS but the external is not enabled.
Any ideas?
[EDIT] [Solved] After a reboot, GPS is working fine.
Notifications Blah
hoganw said:
One minor and a couple of major issues...
- Notification drop-down stops accepting touch input but can still be slid up and down. Reboot fixed
Click to expand...
Click to collapse
I had this same problem, reboot fixed but only temporarily as it returned last night again. As of right now I can't get the notification bar drop down to accept input without a reboot. I'm borderline on this being a showstopper as I live off of the notification bar...
I've poured through the settings, but haven't found anything that fixes it. I have the notification bar power widget turned on, turning that off hasn't made a difference either. I'm going to leave it off and reboot, and see if it comes back.
Do you have the notification power widget turned on?
For everyone having problems with CM7, I HIGHLY recommend going in and wiping both cache and dalvik-cache. (Not a data wipe.) This has fixed pretty much every problem I have run into with CM7.
Now for downloading large files, I have found that I have to use tasker to create a "power profile" that never turns off the screen. I do not have the WIFI loosing connection issue that has been reported, however I have noticed (on stock as well) that when the screen times out, downloads all fail or stop. Just my 2 cents.
Ciao!
Moon Shadow - NM said:
For everyone having problems with CM7, I HIGHLY recommend going in and wiping both cache and dalvik-cache. (Not a data wipe.) This has fixed pretty much every problem I have run into with CM7.
Click to expand...
Click to collapse
Even though this was done after applying CM7 in BSR? Not sure why doing it again would make any difference, but stranger things have been known to happen.
Now for downloading large files, I have found that I have to use tasker to create a "power profile" that never turns off the screen. I do not have the WIFI loosing connection issue that has been reported, however I have noticed (on stock as well) that when the screen times out, downloads all fail or stop. Just my 2 cents.
Ciao!
Click to expand...
Click to collapse
I'm not sure if people have tried this, but it works for me...
Settings -> Wireless and Networks -> WiFi Settings -> (menu button) -> Advanced -> WiFi Sleep Policy
By default it's set to turn wifi off when the screen turns off but can be set to "Never."
I would like to report the only problem I have had with CM7 on my DX2 is one of my apps not restoring data I backed up before flashing. Other than that, I LOVE THIS ROM! I used this ROM on my old Dinc and absolutely loved it then too. I feel at home with CM7, and since this is only a beta version, I can't wait for the final release!
Moon Shadow - NM said:
For everyone having problems with CM7, I HIGHLY recommend going in and wiping both cache and dalvik-cache. (Not a data wipe.) This has fixed pretty much every problem I have run into with CM7.
Click to expand...
Click to collapse
I wiped cache and dalvik (even though I did it in the install steps as well) and the frozen notifications problem has not resurfaced for me. I will post again if it returns, but thanks for the tip moon shadow!
Well, I guess I'll give it another shot. Getting back up and running is almost second-nature now, hooray for backups. haha
I'll wipe, flash, boot CM7, reboot, wipe again, and see if things behave any better. I just went back to stock a few days ago and I'm ready to kill it again. Only 2.5 weeks to upgrade devices!
So I've read through the CM7 development threads and through this one regarding some of the issues. I am currently running on Liberty. Since I am still learning the Android world (read: I'm freaking clueless), would you guys suggest changing over to CM7, or staying with Liberty?
Thanks! (from the girl who's trying to learn...)
BreatheALittle said:
So I've read through the CM7 development threads and through this one regarding some of the issues. I am currently running on Liberty. Since I am still learning the Android world (read: I'm freaking clueless), would you guys suggest changing over to CM7, or staying with Liberty?
Thanks! (from the girl who's trying to learn...)
Click to expand...
Click to collapse
I have never run the liberty rom but i do recommend cm7. The only issue I've had is with wifi. It loses connection sometimes. I downloaded wifi fixer from the market. It doesn't fix the problem but it does reconnect wifi for me. Some have this problem and some don't.
Make a nandroid and give it a try. If you don't like it you can always go back to liberty.
Sent from my cm7dx2 using XDA App
maggard5 said:
I have never run the liberty rom but i do recommend cm7. The only issue I've had is with wifi. It loses connection sometimes. I downloaded wifi fixer from the market. It doesn't fix the problem but it does reconnect wifi for me. Some have this problem and some don't.
Make a nandroid and give it a try. If you don't like it you can always go back to liberty.
Sent from my cm7dx2 using XDA App
Click to expand...
Click to collapse
Thanks so much!! I found the directions to give it a try, and realized it was waaaaay more complex than what I felt comfortable doing on my own. Plus, it said I would have to install it from Gingerbread... so that would be 2 installs to complete. May have to wait for my tech guru for this one! However, I'm excited to check it out!
(By the way, I realized that on the couple posts I have, you have helped with both of them. Double thanks. )
BreatheALittle said:
Thanks so much!! I found the directions to give it a try, and realized it was waaaaay more complex than what I felt comfortable doing on my own. Plus, it said I would have to install it from Gingerbread... so that would be 2 installs to complete. May have to wait for my tech guru for this one! However, I'm excited to check it out!
(By the way, I realized that on the couple posts I have, you have helped with both of them. Double thanks. )
Click to expand...
Click to collapse
Good luck with whatever you decide but it really isn't as complicated as it sounds. Moonshadow has created some great tutorials to guide you through each step. And you are welcome for the help.
Sent from my cm7dx2 using XDA App
Well, I guess I'll give it another shot. Getting back up and running is almost second-nature now, hooray for backups. haha
I'll wipe, flash, boot CM7, reboot, wipe again, and see if things behave any better. I just went back to stock a few days ago and I'm ready to kill it again. Only 2.5 weeks to upgrade devices!
Click to expand...
Click to collapse
Looks like the notification issues returned for me, great timing. I noticed this time, that one of the notifications that is stuck there is partially Swiped off to the left. I took a screenshot but I'm a nub here and can't post the link.
On another note, I continue to have the wireless problems... dx2 keeps trying to connect, sometimes says disabled. I have set it to never turn off in the screen timeout section. Very weird...
Sent from my MB870 using XDA App
Well, I went and reinstalled CM7 last night. I was diligent about clearing both caches both before and after install, and again a little later after reinstalling apps, plus I also cleared the battery stats.
Don't want to jinx it, but so far so good. Battery life has been very good, I easily went 16 hours and the battery was still > 50%. No call or SMS issues and no notification bug yet. We'll see how things work over the next couple of days...
I've got horrid battery life (down to 60% in 5 hours of LOW use) and some wifi issues (sometimes has a hard time connecting, sometimes not).
I'm going to try the davlic and cache wipe and report back.
Hi Guys,
Im no Genius when it comes to android, but I have done my fair share of programming before, but my SOD are killing me and a last resort is a warranty exchange as I cannot be without a phone.
So far I have been getting SOD about 5 times a day if not more, and I am one for tinkering with gadgets until i break or crash it, fix it and doing it all over again.
But anyway back on topic
I have noticed this in the build.prop
" persist.ril.mux.sleep=2 "
And so I wondered if this is causing my SOD, does anyone have any ideas regarding its uses?
Findings (as of 2155)
In my testing thus far I have changed it to "persist.ril.mux.sleep=1" using phone leaving it for an hour doing it over just for fun, And I have been SOD for 5 hours straight and haven't had any SOD or adverse battery drain
I mean this may not be the cause of the SOD for me, or anybody but I am up for trying just about anything
What is SOD?
Sent from my Motorola Atrix 4G using Tapatalk on AT&T, the company that disappoints me so much that I have to use my tapatalk signature to tell everyone
Sorry, Sleep Of Death
I have SOD here too. To me it's only happens when I turned off a data connection (3G or wifi).
I use LoadMonitor app as a workaround for a while, with success.
At now I'm using Neutrino 2.5 CM7 ROM with success too. I think it's more a blur rom problem than cm7 one.
Let us know about your progress.
So if you disable load manager you would get SOD?
I am making a script to update a few things so far no SOD for me, after a few tweaks
What settings are you using on load manager ?
Any info you can give me will help in me tracking down some of the errors and temporary fixes people are using to avoid the dreaded issue
Oh, THAT's what that was!
I forgot to turn the wifi back on a few nights ago when I said "Hey, let's watch some movies on netflix with my super-duper mirroring-abled phone!" So an hour into it, LBE Privacy warns me I'm about to max out my data, and I go turn the damn wifi back on but turned OFF the 3G.
Then last night I go to wake up my phone and the screen is "black but on", & took a couple of tries to wake it. I'm on Nottachtrix.
Harrison85 said:
So if you disable load manager you would get SOD?
I am making a script to update a few things so far no SOD for me, after a few tweaks
What settings are you using on load manager ?
Any info you can give me will help in me tracking down some of the errors and temporary fixes people are using to avoid the dreaded issue
Click to expand...
Click to collapse
I'm a bit confused here. I don't know what "load manager" is.
What a sad is I used LoadMonitor app (from market) as a workaround.
LoadMonitor just monitor taks that are running in your device. But it have an option that claims to prevent device deep sleep. So, when I checked this option my device don't get SOD.
It's a workaround, as I sad, and I don't know how LoadMonitor do that.
What is load manager?
Thanks
I had a similar issue, I installed SetCPU and set my minimum speed to ~456(faux 1.45 Kernel).
Never had the problem since.
cldot said:
I had a similar issue, I installed SetCPU and set my minimum speed to ~456(faux 1.45 Kernel).
Never had the problem since.
Click to expand...
Click to collapse
cldot do you use blur rom or cm7 one?
Thanks
My bad meant load monitor
Sent from my MB860 using xda premium
I tried some roms and the only one I hadn't random reboots was jokersax11 alpha7 (ICI), now I'm on beta 0.2.0 and had reboots.
I'm having the same problem. I've tried 3 different ROMs. I used Nottachtrix, following the directions to the letter with reboots and hard locks. Recently I flashed back to 4.5.91 (w/pudding) and I was having the same issues. I noticed that on the hard locks, my phone appeared to be warm, so I used SetCPU at 216MHz and still had hard locks and random reboots. I've not set the lowest setting at 301 and so far I haven't had any reboots, but its only been about 5 hours. But I was having them at least once every few hours.
BTW - I also noticed that I only had the freezes and hard locks when the phone was running on the battery. I rarely had problems when the phone was on the dock or USB charger, however, I did have reboots when it was on the wall charger.
Another program you can try is call 'Wake Lock' available from the marketplace. I haven't used it yet, I'm still experimenting with load monitor.
Wake lock has a few different options and has some really good review.
I confirmed that Neutrino 2.5 CM7 Rom works great without reboots.
That's a patch you need to apply to correct a battery drain problem of the original version. Notorious544d are working in a 2.6 version including that patch.
To me it's working like a charm. I'm testing for two days but, of course, everyone needs to test it in your own device.
PS: Follow this instructions to install a battery drain patch in Neutrino 2.5 (or wait for a 2.6 version):
http://forum.xda-developers.com/showpost.php?p=23179486&postcount=4258
Update 13/03/2012: Notorious544d released Neutrino ROM 2.5p with battery patch and some other things.
See you!
what patch?
marcosvafg said:
I confirmed that Neutrino 2.5 CM7 Rom works great without reboots.
That's a patch you need to apply to correct a battery drain problem of the original version. Notorious544d are working in a 2.6 version including the patch.
To me it's working like a charm. I'm testing for two days but, of course, everyone needs to test in your own device.
See you!
Click to expand...
Click to collapse
Could you point me to that patch? I can't seem to find it. Thank you
Sleep Of DEATH!!!
I was encountering that problem for a while but then I figured that something went wrong when I was flashing CM7 Beta. So I flashed Aura's ROM, and then Reflashed CM7 Beta and only experienced it once a month at most after that, Hope it helps
eNorby said:
Could you point me to that patch? I can't seem to find it. Thank you
Click to expand...
Click to collapse
Follow this instructions (or wait for a 2.6 version):
http://forum.xda-developers.com/showpost.php?p=23179486&postcount=4258
Update 13/03/2012: Notorious544d released Neutrino ROM 2.5p with battery patch and some other things.
Atrix SOD & Random reboots related to Wifi?
Does anyone know if the Atrix SOD & Random reboots are related to WiFi. I've had my wifi off all day and I've had no crashes.
I'm going to run it for a few more days without Wifi and see what happens.
I don't know about other guys, but wifi and 3G was the cause of my Atrix SOD and reboot problems.
Solved it using Neutrino Rom CM7 based.
See you!
Still working on my SOD issue, but recently, I disabled most power options, turned off wifi, rebooted and I've been running for 2 days with no crashes. After day 3, I'm going to turn wifi back on reboot and see what happens.
Update 1
After 3 days with wifi disabled, I've had no crashes, no freezes or random reboots. I'm going to enable wifi again and see what happens.
Update 2
After turning enabling my wifi and using it briefly then turning it back off, I had a random reboot later that evening.
The more I used my wifi, the more frequent my crashes became.
Interesting side note
I can enable all my radios when plugged into the desktop charger and I won't experience any crashes, however, if plugged into to the AC charger, I've had reboots and freezes.