[Q] Bluetooth App - Wildfire Themes and Apps

I don't know if it exists but...
When I have my bluetooth headset on and my phone is ringing, I can't understand who is calling (if my phone is in my BIG bag)...
Does exist an app for changing tone with a Bluetooth headset connected, that ring in my ear with the name? I mean, like old Nokia metallic voice
Thank you!!!

I don't know whether it will work only when a BT headset is connected, and not at other times, but, there are a lot of apps on the market that can read out the contacts name. (Another missing feature on Android, that was there in all Nokia's...)
https://market.android.com/details?id=ekawas.blogspot.com&feature=related_apps
https://market.android.com/details?id=net.kgmoney.TalkingCallerIDFree
https://market.android.com/details?id=net.kgmoney.TalkingCallerID
https://market.android.com/details?id=com.pwnwithyourphone.voicecallerid

Related

[Q] no sound on incoming bluetooth call

Car stereo has bluetooth. I finally hooked up a microphone so it's usable in the car for making calls. When I place a call everything works fine, but when I receive a call I can't hear the caller, although they can hear me fine.
Anyone else experience this and find a fix?
Running the latest official AT&T release with no modifications.
Yes, I keep finding this myself and I have discovered the "problem" and solution
Basically, any incoming calls default to handset speaker and you have to manually tap "bluetooth" to transfer the call to the headset/handsfree. When making outgoing calls, it defaults to Bluetooth from the offset so no problem!
What I do not know, however, is how to force it to default to Bluetooth on incoming call...
I have not seen that issue and I use BT in my car a lot. BB351
Something else that could be the case: Are you listening to music through A2DP bluetooth at the time that the call comes in? It's possible that the transition from A2DP to headset protocol is what is "blocking" the call from going straight to the handsfree?
chaosdefinesorder is correct, you could have a misbehaving music app (or any other app with audio over bluetooth, such as navigation).
I know that PowerAmp and Playerpro both work well with bluetooth with the music stopping when a call comes in.
I was listening to FM radio at the time. When the call ends it always go back to whatever I was listening to.
So next time I should tap the phone button on the radio instead of sliding the button on the phone, apparently.
chaosdefinesorder said:
Yes, I keep finding this myself and I have discovered the "problem" and solution
Basically, any incoming calls default to handset speaker and you have to manually tap "bluetooth" to transfer the call to the headset/handsfree. When making outgoing calls, it defaults to Bluetooth from the offset so no problem!
What I do not know, however, is how to force it to default to Bluetooth on incoming call...
Click to expand...
Click to collapse
This was it. I have to answer the head unit, not the phone.
Operator error.

Bluetooth headsets/car handsfree

I just bought my first android phone after years with Nokia. Now my question is simple:
With Nokia I just needed to pair my bluetooth car handsfree with the phone, press the green key in the car and I could use the BT handsfree "headset" as input/output for the phone. It also used the phone vocal recognition to start a phone call just naming the contact (using the BT microphone).
With Android the BT headset connects, I can speak through it using the car microphone and speakers, but I must start the calls manually from the phone. Receiving is ok, the green button works.
I tried all kind of BT applications (Vlingo first of all). Is that possible that there is NO option to redirect the audio I/O to the headset?? No to mention that to use the phone vocal recognition I must be ONLINE? What is that?? Is it really that retarded? I don't care about all the beautiful apps. If a phone can't fully serve its purpose, which is… making phone calls? it is just apiece of junk!
Sorry for the rage, but I've found it unbelievable. Any idea/application about how to fix it? I just want to be able to make phone calls without stopping the car (or even worse, to risk to have my driving license suspended)!!

[Q] Notifications and S Voice doesn't work via Bluetooth

My Galaxy S3 connects to my car's Bluetooth and allows me to make and receive calls. However, notification sounds are not playing via Bluetooth. It seems that the phone is sending the sounds to bluetooth but the car system doesn't play them. The result is that I have no audible indication when I receive a message when my phone is connected to my car's Bluetooth system.
Similarly, if I try to use S-Voice it would seem that the phone is expecting sound input via bluetooth and not from the phone's built in microphone, which means it does not detect any sound. Audio output also does not play on the phone or via bluetooth.
Presumably my car's bluetooth does not support receiving such sounds - only supporting basic phone functions. I cannot find any configuration settings on the car system to enable it.
Is there any way of stopping my phone trying to send notification sounds to bluetooth and to just play these via the phone's speaker but still allowing the phone to be connected to bluetooth for making and receiving calls? Similarly can I force S-Voice to use the phone's microphone and speaker if it cannot be made to work with my car's bluetooth?
S Voice on AT&T Galaxy Note Bluetooth In Car
First off, I am having the same issue, I tried even holding down talk / voice command button on steering wheel, No luck. I have a 2012 Kia Optima GLI full Nav and Voice command options. I have my Note working nicely with Team Perfection ICS R2, S Voice is fully functional except:
When using S voice in car connected to car Bluetooth (pushing search button on bottom of phone face) it tries to accept audio input from car Mic over Bluetooth, but never receives input. Can't find any setting in S voice app to change input setting from car to phone mic. Not sure why the car mic doesn't work other than just not supported by the s voice app? Anyone out there know of a fix or work around?
s voice does not work over any bluetooth
I have tried this on multiple Bluetooth devices. It does't hear anything and it responds with a very feint. Robotic distorted voice. Music plays well on Bluetooth but I have had problems with phone calls.so maybe the problem is the Bluetooth stack rather than s-voice.
I am having the same problem with SGS3. When I was testing s-voice on SGS2 you could set s-voice to use SGS speaker and mic for voice commands and notifications. Now I can't find that toggle.
BT Devices , yes....Car BT, No
It works fine on my headsets. IT doesn't work in my car.
spanout has nailed the problem. It apparently does NOT use the mic in the phone when hooked to BT. The car is not designed to pass voice to the BT. The car BTs typically have their own voice control, and as such is handling the voice itself.
When you think about it, it makes sense. Less chance for outside noise if it takes the input from the mic on your BT device, as likely the phone will not be close to your mouth.
The only way we'll get it to work is to find a way to enable the mic on the phone when on BT. Probably would need help from the DEVs here on that.
im in the same boat!
the real kicker is SIRI can send her voice over the car speakers and utilize the car mic.
so logic says, its purely a BT setting on the software ice cream and s3.
any apps for that? or any dev's want to chime in?
im using a very simple bmw bluetooth (not idrive).
it cant stream music, so i dont know how the fak siri can send her voice over it.
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
georgedeaves said:
I have this problem with my SGS3, and had it with the SGS2 in my Ford S-Max. The problem is Ford's. Using the phone with a parrot car kit has all notifications fired over bluetooth.
Click to expand...
Click to collapse
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Yakumo.unr said:
same with a jabra freeway with latest v3 firmware and a galaxy s3 i9300xxblfb.
very dissapo9nted, finaly a fast, accurate voice app that understands my music requeats and i cant use it in the car!
Click to expand...
Click to collapse
so switching the s-voice and nav to MONO works with bluetooth, but the a2dp or whatever protocol it uses normally doesnt work.
however calls are done using a2dp, so wtf?
can someone make a quick app that just forces ONLY s-voice and NAV in to mono?
the apps out there make everything go mono or nothing at all...sucks for voice call quality
I needed to revive this thread as a search for my problem led me to it.
1) Is anyone able to play a video on the S3 (GT-I9300 4.1.2) and stream the sound from the video to the car while connected via Bluetooth?
I am not.
2) S3 notification sounds do not play via the car's speakers when receiving a text message or email etc.
I can make and receive calls just fine and even play music from the S3 via BT by selecting the phone from the list of devices on the car's screen.
Blutooth / Voice App Issue - SOLVED
First of all this does work on my 2009 Highlander, but it's a bit Kuldgy.
BT Mono allows my voice app to work, but by itself it's not a solution. You have to activate it manually before using S-Voice, Google Voice or AVX. It opens the connection and has to be activated each time or it can be set to reconnect automatically…. Killing my radio.
Download the free version (I can’t access the play store to give you the link) and see if it works manually. If it works for your test then the rest should work as well.
Install Tasker:
Create a task to keep the screen from locking when your state is Bluetooth connected to the car device.
Create a Task (you don’t need it in a profile)
- Set bluetooth on (in case it’s off)
- Load BT mono (with auto on enabled in the BT mono app)
- Wait ~400MS
- Load App AVX (or S-Voice, or whatever)
- Wait 9 seconds
- Kill BT mono
- Kill BT mono root (it wasn’t always killing BT mono)
I’ve been thinking about trying to simply reboot the BT (BT off then wait then BT on) rather than kill an app.
You can add the task to your home screen as a widget…. Still not safe to do while driving.
That’s where GMD Gestures comes in. You set a swipe command, I use 2 fingers down, to launch the task.
Seems to work pretty well. I can keep my eyes on the road and still use voice commends. You do need to hang up the phone when you’re done talking, but I had to do that with Siri.
I still wish there was a force mono on all connections app, but I still haven’t seen one. AVX just added the ability to force mono for speech, it’s worked for other people, but I’m still trying to figure out why it doesn’t work for me (he's had reports that the Note 2 doesn't like his solution, Kudos to him for trying to add this).
Hope this helps
****UPDATE****
BT Mono may work for me because I'm rooted. According to the app on the store (pro version) Apparently Samsung, in an effort to prevent call recording, blocks the ability to re-route the microphone.

Bluetooth Headset connect voice only no music, sounds etc

Hi, as the title says, I want to connect my BT headset for telephone conversations and nothing else, like music, notifications etc.
What I could do with ease with Galaxy S2. Now, with the lumia, I am on Bluetooth settings and it displays
Jawbone ERA
connected voice, music
I want to connect only to voice and not music. It sends all the sounds to BT and i experience battery drainage in both.
Is it even possible to do it?
panast said:
Hi, as the title says, I want to connect my BT headset for telephone conversations and nothing else, like music, notifications etc.
What I could do with ease with Galaxy S2. Now, with the lumia, I am on Bluetooth settings and it displays
Jawbone ERA
connected voice, music
I want to connect only to voice and not music. It sends all the sounds to BT and i experience battery drainage in both.
Is it even possible to do it?
Click to expand...
Click to collapse
Just tested it with Sennheiser MM100 - works. When it says "Music, voice connected" both should be connected and work.
Thanks. I am interested to connect only the voice and not the any other audio and music. Is it possible to connect just the voice like I can with any android?
I just tried, I can not find a way on removing the individual profiles. All or nothing I guess. Do you run music to something else (maybe a by speaker) while the headset is connected for calls?
Sent from my RM-820_nam_canada_200 using Board Express
jeromel said:
Do you run music to something else (maybe a by speaker) while the headset is connected for calls?
Sent from my RM-820_nam_canada_200 using Board Express
Click to expand...
Click to collapse
No, but I have problem with excessive battery consumption on both headset and handset when they are BT connected and all the sounds are sent in the headset.
Well I confirm this has been fixed with the latest connectivity update. Now I am connected to my Jawbone ERA only voice (no music, audio etc) and to my Jawbone JAMBOX music only. It may took a month or so, but better late than ever.

Is there a fix for the ringing issue when bluetooth headsets are present?

When connected to a bluetooth headset, no matter "what" ROM i'm using, it seems to not ring to the phone. I've used all the apps that are supposed to redirect sound and they don't work well at all.
Thoughts?
Same issue here.

Categories

Resources