Cannot restore LCD density in mini pro..please help!!!! - Sony Ericsson XPERIA X10 Mini

HI!!
I am new to this forum. I rooted my mini pro then installed a droid overclock. but i am unable to overclock. it has extra options in which changing lcd density is one. i changed it to stock value. after that it asked for reboot. after reboot the resolution is decreased ...i only see large icons most parts are invisible.
i tried using lcd density app and lcd density changer app...both didn work
i tried for factory reset ...but that too had no response... i also restored backup ...but no change ....please any one help..
its X10 mini pro
Android version 2.1
Thankyou!!!

Look into the /system/build.prop file.. you should find a line referring to screen LCD density
ro.sf.lcd_density=
Change the number at the end to 110
E.g. ro.sf.lcd_density=90 --> ro.sf.lcd_density=110
Save and exit, then reboot .. should fix your issue
Alternately you could search xda for ADB mask controller.. I think that has an options to edit the LCD density
Sent from my X10 mini using XDA App

Gothic-4-Schiffer said:
Look into the /system/build.prop file.. you should find a line referring to screen LCD density
ro.sf.lcd_density=
Change the number at the end to 110
E.g. ro.sf.lcd_density=90 --> ro.sf.lcd_density=110
Save and exit, then reboot .. should fix your issue
Alternately you could search xda for ADB mask controller.. I think that has an options to edit the LCD density
Sent from my X10 mini using XDA App
Click to expand...
Click to collapse
Mini and mini pro default lcd density value are 120
Sent from my X10 mini pro using XDA App

I need to post on small threads sorry. Btw just change the build.prop
Sent from my U20i using XDA App

i am new to this site and just rooted my galaxy mini.i have changed my screen density to 220 have messed up my screen.since i can't access superuser due to limited icons being displayed im stuck up with a ****ty screen as help would be much appreciated.
P.S i haven't/cant install busybox since i cant access the superuser functionality

ha17sun said:
i am new to this site and just rooted my galaxy mini.i have changed my screen density to 220 have messed up my screen.since i can't access superuser due to limited icons being displayed im stuck up with a ****ty screen as help would be much appreciated.
P.S i haven't/cant install busybox since i cant access the superuser functionality
Click to expand...
Click to collapse
You might be able to use adb to edit the build.prop but this is a totally different phone so you will have to follow your phones guides for restoring things like stock ROM
Sent from my U20i using xda premium

solution.
Hello,
a moment ago had the same problem,you do not need to reset or anything.
just follow. I know that all apps become hard to operate and in the app "build.prop" it wont even show the size. here's a solution that might help. you need to have an app which has a bigger UI . like I used -"Root explorer" since it gives more space to edit the build.prop file.
now go to app , find build.prop , edit, search for ro.sf.lcd_density , after an "=" you'll see the value associated with it. since your keyboard will be like before only, type default value and save.
note- if you are not able to open play store from device , try opening it from a pc, then install directly to phone.
hope that helps.
Sunny

Related

LCD Density/3G?

So I'm on eclipse .6 but I also had this problem on .5. Whenever I change my density to 220, as apposed to the stock 240, my mobile data connection cuts off and wont connect. Why is that? lol
I don't even know what you're talking about. What is this "density" you're speaking of?
Pixel density. There's an app called lcd density that changes it.
I dont use lcd density anymore because of the way it reboots the phone to set the build property it is editing and because if you reboot, you have to do it all over again. I use JRummy's android overclock to edit the build properties. It isnt free, but it is a little easier than editing ur build.prop in my opinion....
https://market.android.com/details?id=com.jrummy.droidx.overclock
DAG425 said:
I dont use lcd density anymore because of the way it reboots the phone to set the build property it is editing and because if you reboot, you have to do it all over again. I use JRummy's android overclock to edit the build properties. It isnt free, but it is a little easier than editing ur build.prop in my opinion....
https://market.android.com/details?id=com.jrummy.droidx.overclock
Click to expand...
Click to collapse
Root tools, also by jrummy, is a better solution, I think.
Sent from my DROID X2 using Tapatalk
You can also edit the line in build.prop to make any LCD density change permanent.
ro.sf.lcd_density = (input your pleasure) I have mine set at 180.
I used the text editor in root explorer ...
Keep in mind though that modded density levels may create problems with the Market, as some have reported that certain apps may appear incompatible with your phone after the change. This is definitely an issue with the new market (3.1.3), so I restored an older version (2.4.5) and froze market updater to resolve this.
Hope this helps ...
Pj
Messing with the LCD Density always causes some kind of conflict regardless of how you do it, I just end up keeping it at default.

[q] dpi :: Lcd density changer

Hey guys recently changed my DPI, I found using this app you can set your saved density as "240" and change your density via the "PREVIEW" button to "190" and still be able to use the market as per normal..
Although this got me thinking.. why cant we make this a permanent change ? So spoof the DPI to the market making it believe were on 240.. although in reality using 190..
Any ideas ? every a start up script which will detect if the current DPI is set to 240.. to put the device in LCD DENSITY CHANGERS "PREVIEW" state of the DPI to 190.. or better yet actually edit the Market app.. to force it to read the DPI as 240 all the time ?
Im new to the android scene.. so not sure if this is possible or not but would love to see this happen..

[Q] LCD density modder, and cant boot

I did something dump today
I used LCD density modder pro on my rooted prime. I changed from 160 to 140 and when i rebooted using "save as system DPI (Reboot) the Ics launcher keeps crashing and i cant go back to it to change it back to 160.
What is the easiest way to accomplish this now? I can use ADB, but before i start messing around and make it worse, please give me the easiest instructions (not a beginner, but not super duper adv either).
Thanks
-- Resolved --
Relatively easy.. adb'd pull to pc and fixed build.prop and pushed back and all is good.
I also came accross this issue.
Im not so advanced at adb etc.
The way I did it was to email myself a link to LCD Density Modder in the market.
I could then click on the email in the notification bar and use the link to open the market.
You can then click open on the app and change the density back to 160.

[Q] LCD Density on SGY GT-S5360

Good day guys,
I have a problem with my sgy s5360 (rooted). i recently changed my lcd density in error and instead of the 120 default setting, I changed it to 288. that was really frustrating. I haven't been able to fix it myself. I have already done the factory reset but that didn't help. I used the ROM toolbox. Now my sgy is like in a zoomed state. Large fonts, cannot unlock and change to default setting. I cannot click the android icon that can be seen when you reboot your phone and did the factory reset. assistance is badly needed. i have browsed through the theads, but this issue has not been addressed.
Please help me. I dont have money for buying a new phone this time.
If u can't access your build.prop through your phone use adb to pull it to your pc, edit it and push it back to your system.
Sent from my A110Q using XDA Premium 4 mobile app

Good bye DPI changing?

Before we could and still can change DPI for the phone but now that xposed is not working, we can't change specific apps that need original stock DPI. I hope I can live with the original DPI settings lol
Brava27 said:
Before we could and still can change DPI for the phone but now that xposed is not working, we can't change specific apps that need original stock DPI. I hope I can live with the original DPI settings lol
Click to expand...
Click to collapse
Have you tried changing the DPI? I tried with textdroider and despite trying a few different values it didn't change. Textdroider reported the proper value but there was no change in anything.
you know you have to be rooted to change dpi, right?
if you are, do it in the build prop
wase4711 said:
you know you have to be rooted to change dpi, right?
if you are, do it in the build prop
Click to expand...
Click to collapse
Yes I know that and changing it in the build.prop is what textdroider does. I've done it with app and manually and it doesn't change anything.
so, when you save the new build.prop, and you open it again, it shows that your density settings are saved?
And, then after rebooting, the old density is back in the build prop?
I wont get my phone until later today, so I cant try it now, but that's strange..
wase4711 said:
so, when you save the new build.prop, and you open it again, it shows that your density settings are saved?
And, then after rebooting, the old density is back in the build prop?
I wont get my phone until later today, so I cant try it now, but that's strange..
Click to expand...
Click to collapse
Yes the new value shows after manual (and after textdroider) edit and save/reboot but the screen DPI doesn't actually change. The value is shown, but the screen is the same.
There are actually a few different values, the one that is 400 is the one I'd been changing. I wasn't sure what the two 640 values were and haven't changed them. Never seen a build.prop with multiple values. Didn't know if maybe those two values corresponded to the left and right edge screens since there are settings for them.
Have you found out any more info about this setting?
Has anyone tried running this via adb shell:
wm density 380 (or whatever density you want)
This worked fine without root on my Xperia phone. Just curious as I am thinking about getting this phone, but not setting density is a potential dealbreaker.
Alright so an update, it's the first 640 value that changes the DPI. The one under #system.prop for universal7420. I changed it to 580 and the attached pic is the result. I loaded google now launcher to test the scaling and it appropriately scales itself to use the whole screen whereas TW moved itself to the top left of the display. I guess the next challenge is to make TW properly scale.
I noticed that last night. I wonder what the other 2 dpi settings control?
adb works
I have successfully changed the DPI using adb on normal S6, though Play Store now believe it to be a tablet. Also, most of touchwiz hates it, not a big deal for most things, camera may be the biggest annoyance when its only taking up the upper right 60% of the screen.
Has anyone sucessfully changed the per app DPI, like you can with Paranoidandroid?
Look for "buil prop editor" on play store!! But the kamera and keybord looks like a#$
Dears, you can easily swap de dpi with a simple app : Resolution changer.
Kind regards,
wikidavid said:
Dears, you can easily swap de dpi with a simple app : Resolution changer.
Kind regards,
Click to expand...
Click to collapse
What are you doing? trying to pad your post count? Exact same reply in three different threads about DPI, as well as your other post in the same threads asking "dears to please not use the double post..." WTF?
schollianmj said:
What are you doing? trying to pad your post count? Exact same reply in three different threads about DPI, as well as your other post in the same threads asking "dears to please not use the double post..." WTF?
Click to expand...
Click to collapse
I'm just trying these things :
1) delete double post/overflow on the forum
2) give a solution anyway.
Don't be upset, there's no reason to... Have a nice day !
boosting1bar said:
Have you tried changing the DPI? I tried with textdroider and despite trying a few different values it didn't change. Textdroider reported the proper value but there was no change in anything.
Click to expand...
Click to collapse
I also tried the same thing with no results
Hi,
I changed my DPI successfully by changing the first occurrence of ro.sf.lcd_density from 640 to 540 in /system/build.prop using the built-in texteditor in root explorer (and rebooting afterwards ofcourse).
Then I noticed the camera didn't work properly anymore, so I created a fix for that (see this post).
Hope you'll get it to work, it seems the same to me as on earlier devices with as exception that the ro.sf.lcd_density occurs multiple times in the build.prop file.
Cheers,
Bane.
For testing different resolutions:
- have a functional adb
- enable USB debugging on device (developer options)
- connect device to your PC via USB cable. Then start a cmd in folder containing adb.exe. Type "adb devices" (without quotes) in the command prompt to check if adb recognizes the phone
- If is OK, type "adb shell wm density ZZZ" (no quotes) where "ZZZ" is the pixel density value you want to try (default is 640)
- no reboot needed, the change is on-the-fly
- check the programs (Samsung ones - dialler, calendar, camera, launcher, etc...)
- the change will disappear when you reboot your device.
per-app DPI...not; only with Xposed, when will be available.
Once you find the desired resolution it can be inserted in build.prop

Categories

Resources