I have installed numerous ROMS from Z, T and J and am curious as to whether or not when I flash a new rom there will be residual apk's and crap left behind.
Is there anyway to completely wipe my phone of all roms but keep Xrecovery on so I can flash a new ROM Zip onto the phone. Is the reset phone to factory defaults the same as a complete wipe?
You could format all your partitions in xRecovery and then reflash with a PC and FlashTool.
I have the same problem. Want to wipe everything and instal a new rom. How to? What flastool we need?
Sent from my X10i using XDA App
http://forum.xda-developers.com/showthread.php?t=825675
try this.
Its safe to format System with xrecovery? we can flash with flashtool or seus after wipe system??
just do a full flash using Bin4ary's flasher from the post 2 up. This will effectivly format the phone at start from scratch.
You will need to re-root, reinstall xRecovery (if required), etc. it is a fresh phone, no customisations at all.
Thanks for the Quick Replies gents, I wiped all partitions via xRecovery, dalvik cache, battery stats, and did the factory reset option all at once in the same xrecovery session then without reboot then loaded the FreeX10 2.2 rom and rebooted. Not sure if that got the job done. I've flashed new roms so often that I figure there are still some residual files left behind. An app that completely wipes the phone then loads a ROM would be great. I have a suspicion that Xrecovery does that itself but I'd like to be sure.
"just do a full flash using Bin4ary's flasher from the post 2 up. This will effectivly format the phone at start from scratch.
You will need to re-root, reinstall xRecovery (if required), etc. it is a fresh phone, no customisations at all." -mrtim123
Didn't read that before posting but that sounds like it would solve my problem. I've just been trying to keep up with all the mods for this phone since switching from a BB Bold 9000 and I think it may have a toll on the phone. I'll give that a shot, thnx.
Hey guys
I got a problem, today I tried the new tripnmiui... I did everything like I normally did with installing roms but now my phone is in a bootloop. And it seems I cant get out of it.
Cant flash or anything because my phone wont connect long enough. When my phone is recognized in a flashtool it reboots again and then looses connection in the flashtool.
Things I did:
Old rom > New rom
- Factory reset
- Wipe cache
- Wipe dalvik cache
- Then I installed the rom.
Could it be Im not on baseband 49? Coz im on 54... but I think it has nothing to do with the bootloop.
Thanks in advance guys
Nvm guys already got
So i managed to solve the problem that i had.
When i said that i could flash only the stock one, i was flashing XXKI3 as one file after each failed attempt to flash a custom one.
So i tried and flashed another stock rom, again as 1 file. after the flash was done the phone again stucked at first screen wit the triangle.
After that i thought that something was really messed up in the phone and flashed again XXKI3 with PIT and multiple files and offcourse RE-Partition.
After that flash a stock rom with 1 file and modified bootloader from Intratech's thread, this way you can also reset the binary caunter with a jig (can find many on ebay).
After finish flashing and first boot
root with CF kernel and flash any custom rom. It worked as it should. Now i am on a custom rom and trying to see which one suits me best.
Thank Jiganet for some may be needed modified bootloader which is recommended so you can reset binary counter.
Everyone tha nk you for your suggestions and help.
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
The first boot takes some time. Are you waiting that long?
mariosraptor said:
any rom that i install is not getting beyond the bootlogo. i had xxki3 stock with cf-root xxki3 kernel.
every install i make full wipe on everything before(data, cache, dalvik).
any body any idea?
only stock rom working.
Click to expand...
Click to collapse
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
yes. more than 10 minutes.
kanefox said:
The first boot takes some time. Are you waiting that long?
Click to expand...
Click to collapse
i am not getting any bootloops. it just gets stucked at the first screen with the triangle.
i have no experience in samsung but i have done all that you mention.
still no luck. i will try once more and let you know in about 20 minutes.
thanks for your help.
rembrandtlnx said:
1. Enter Clockworkmod recovery
1a. Do a Backup (not a must, but i suggest) from the cwm recovery of your current rom/settings.
2. Wipe Data/Cache Factory reset
3. Flash the new rom you want
4. Again (not needed but well..) Wipe Data/Cache Factory Reset
5. Wipe Cache
6. Advanced -> Wipe Dalvik Cache (this is why you get bootloops)
7. Reboot to system
Wait 4-5 minutes and you will have your new, shiny working rom.
Hope it helps, cheers
Click to expand...
Click to collapse
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
mine is an unbranded i9100 from Greece. i am flashing the correct roms.
rembrandtlnx said:
Mh strange, the strange is.. with the stock rom is working.
Looks like your phone dosnt like the rom you are flashing so the quesion now is:
Are you sure, you are flashing a rom your phone can read? I know the i9100G and the AT&T versions cant be flashed with the standard (i9100) S2 roms (there is a specific thread i think here on xda for those versions)
Click to expand...
Click to collapse
the same. more than 15 minutes of waiting time. flashing stock again.
Im sorry cant rly help you then, let's wait for some more experienced user answer
thanks. no worries. stock is good. matter of speaking
rembrandtlnx said:
Im sorry cant rly help you then, let's wait for some more experienced user answer
Click to expand...
Click to collapse
next time when u flash try formatting system.
In CWM >mounts and storage> format system
Please state detailed steps you did when flashing a ROM and what kind of ROM.. That will help alot on trouble shooting your problem.
Sent from my GT-I9100 using xda premium
every body read first post managed to solve this.
Hi was there a solution to this problem as I seem to get it with EVERY rom I try to install from zip?
Hi to all, this is my first Post and this is my First Android I come from an iPhone 2G, iPhone 3g, iPhone 3GS and my last phone was an iPhone 4!!! now I'm extremely happy with my new SGS2!!!
I have been searching a lot!!! for a solution for this flash loop issue,
1 - I have flash to a stock 2.3.5 KI3 samfirmware,
2- then I have Odin>PDA>cf-root-KI3-4.2.tar to root my phone.
3 - After that I downloaded 3 custom roms, DarkyROM2_KI3, VillainROM-3.0.0-signed and Cyanogen cm_galaxys2_full-112. put them on my root internal sdcard.
4 - booted to ClockworkMod Recovery menu.
5 - Wipe Data/Factory Reset
6 - Wipe Partition Cache.
7 - Install Zip from sdcard.
and every thing seems ok, but when i restart, it stays on the boot loop, even if i manage to enter to CWM Recovery menu it says that E: Can't Mount ... bla bla bla
I had been trying to put a custom rom so much that my binary counter is now on 10
I'm going to try what you wrote on the first post!
Restore to stock KI3 firmware using pit file and repartition.
after that install the cf-root kernel. Restart and try to install any custom firmware.
Hope it works
Not it did not work, Maybe the problem was Wipe Partition cache after installing new rom, going to stock and repeating
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Another try another fail!
I have no idea on what else can I do!!! tried again and nothing! I tied cf-root 4.1 and nothing and cf-root 4.2 and nothing!.
I'm having this exact same problem, please post here if you find an answer to your problem.
I first installed checkrom with no problems, then i decided to wipe and try install dlevrom but after rebooting i'm left with the same problem as above.
It's only when i flash stock 2.3.5 KI3 through odin with pit, repartition, all checked that my phone works.
I then repeat the steps of flashing cf root through odin and then try flash a custom rom, either checkrom or dlevrom and neither work.
Click to expand...
Click to collapse
After i got the stuck on boot! I can restore to stock by only using the PDA, I don't need to set the pit file again!, but I'm usign all the files on Odin to see If that makes any difference but nothing!!!
I wonder how mariosraptor did it!!!! Can you throw us a light???
I have explained it on first post. Just follow step by step the first post directions.
Sent from my GT-I9100 using xda premium
Nope it didn't work
The steps I did:
1. Restore to stock using PIT, PDA, PHONE, CSC.
2. After it boots root the phone with cf root 4.1 for ki3
3. Use CWM Recovery to flash the new rom on internal sdcard.
I have been doing it with wipe data, wipe cache, wipe develk.
Nothing is there a step that im missing?
Thanks
SOLVED!!!!!! JAJAJA
The only problem, was one minor thing, a little thing called Bootloader!
I installed the old bootloader!
find it here: http://forum.xda-developers.com/showthread.php?t=1075278
And after that every thing worked perfectly, no boot loops!!!!
Hope it helps!!!
Hi all,
Here are my problem:
My X10a first running a 2.1 stock AT&T rom. Then i decide to flash the generic 2.3 rom (forgot which rom i had flashed ). And my nightmare begin. After flashing successful (at least the x10flashtool say so) i reboot my phone and the phone keep rebooting forever until it run out of battery . Sometime it can process to the home screen but will reboot after 10-20 second. I hear some of my friend said that some guru in this forum has found a way to fix this problem. Is this true, can you show me the method ?
*Sorry for my bad english*
A billion thanks :X
no one here
there a forum for your device
in recovery wipe data and dalvik cache should stop it
reflash and wipe again if it doesnt work or finally
but you need to use flash tool
owenoliver1 said:
there a forum for your device
in recovery wipe data and dalvik cache should stop it
reflash and wipe again if it doesnt work or finally
but you need to use flash tool
Click to expand...
Click to collapse
can you give me more details about the wipe things ?
Wipe data and dalvik > reflash the rom > wipe data and dalvik again > device will work normally ?
help me please =.=
need help
I recently rooted my phone using this tool: http://forum.xda-developers.com/showthread.php?t=1255548
I tried flashing MIUI and ICS after doing full wipes, but when rebooting the phone, it won't go mast the Motorola logo where it says "Unlocked." Is there a way to fix this?
wipe data/factory reset, cache, and dalvik in recovery
ovitz said:
wipe data/factory reset, cache, and dalvik in recovery
Click to expand...
Click to collapse
I always do that before I flash a rom. I've done it at least 5-6 times now as I try to reflash the roms.
Sorry, early morning brain fart!
What do you consider a full wipe?
How long are you leaving your phone rebooting after flashing the ROM on the initial first reboot?
You could try flashing a kernel after flashing the ROM. You shouldn't have to, but I would try flashing the appropriate kernel from Faux.
Try wiping cache and dalvic cache. After do a factory reset. Then flash the ROM twice! As in back to back without doing anything else.
Personally I would flash another Rom, Some like Nottach or Cm7.2 and see if it boots, if so then recharge the battery and then try fresh again doing the wipes like others have said.
I had issues before where my recovery wouldnt boot but reflash did and was able to redo things and all is well.
For MIUI you need a separate kernel I tried flashing before and was stuck too, then flashed a kernel and it worked (jokers v3 kernels work well)
I have just tried installing CM7 from this thread: http://forum.xda-developers.com/showthread.php?t=1257574
I made sure to do a wipe all data, cache, and dalvik cache. Then rebooted and waited for it go past the logo for 10-15 minutes (which it didn't).
This is the same process I go through for each rom, but it still doesn't work.