first of all let me say that i've don a lot of searching before posting this, and i know it seems pretty long but please try to help me.
i got an x10i from a friend few days a go. the reason i got it (for free) was because it's not working and he didnt want to mess with it anymore.
when i first got it, if i tried to turn it on, the led would flash red. once in a while it got turned on, the sony ericsson text appeared for a few seconds and went off again. now if i try to turn it on the led would flash green for a sec, there is a vibrate but thats it. screen wont turn on at all.
i'f i try to connect it in the SE PC suite it detects it, but fails installing it. i've managed to enter the repair tool, but it failed a few times. however, the last time i tried to repair it said that it was repaired succesfully. still, not turning on.
tried to flash a firmware via flashtool, seems like its going well all the way but in the end it says "error flashing. aborted".
i'm pretty much out of ideas now, so ill really be grateful if anyone could help me.
a little update:
i've manged to flash a firmware via flashtool and it finished without any error, but still it won't turn. only the quick green flash and vibration.
any help will be appreciated.
ok, big update:
the phone is starting, i get past the boot animation and see the main screen (!) but after a sec or 2 the screen freezes and the phone shut down and won't start again unless i replace the battery?
please? anyone? im feeling so close yet so far away. could be a battery issue? when the screen starts i see that the battery is almost empty (connecting it to the charger won't help)
Yesterday i had the same problem ... i had to flash the hole firmware with X10Flash-2.1 and then updating with seus.. after this it restarts and it boot correctly
Not sure if u tried this, try having the phone plugged into the charger and let it charge for a while and then try booting it up again. Firmware wise, I would try a stable 2.1 or the freex10 beta 2.2 for a start to ensure that the software installed are stable ones. Hope this help.
try to fix it with seus...
nothing else willing to work as it seems there is something wrong a little deeper than flashable files...
This is I believe 1000th thread about this.
1. run seus
2. run PCC
3. run flashtool
Done.
SEUS seems to be the most effective way of repairing this.. Although you might also want to try pulling the battery before it freezes, it can help to recalibrate the battery.
Sent from my X10 using XDA and Swype.
thanks to everyone who replied.
i've downloaded and installed on the phone the version by SEUS, but i still cant turn on the phone.
in PC companion nothing is happening. when i go to the support section to get the new version, it just connecting with the phone and then tells to disconnect the phone and turn it on (which of course don't happen).
i've tried to run a repair in PC suite but it fails.
i've also tried to flash a firmware in flashtool, but it also fails.
any ideas?
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
simoking said:
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
and how the 1.6 will help me?
and another thing: i'm using the versions under x10i generic here:
http://forum.xda-developers.com/showthread.php?t=920746
with the first and the third ones i get an error, but with the second i don't. however the device still won't turn on.
is there any chance that because i'm using win 7 64 bit it causes problems?
please?...
Ace_co said:
is there any chance that because i'm using win 7 64 bit it causes problems?
Click to expand...
Click to collapse
If i am not wrong windows 32/64 bit does not affect how ur phone is gonna be installed since the installer that is downloaded is for the phone only and the installation process will only be done by the phone itself.
Not sure if u tried a different software such as xrecovery to install the OS into ur x10, since xrecovery with freex10beta4 works for almost all of the users in here, it should work for u if ur x10 has no hardware faults. If all still fails, it might be most probably your x10 hardware has failed or something along those lines.
It work for me, then with the 1.6 you can after that update with seus to 2.1update 1. If your phone doesn't work anymore you have nothing to lose.
Sent from my X10i using XDA Premium App
the original 1.6 is on this forum also... please make some commercials somewhere else... k thanks...
4 out of the 9 posts u made had something to do with this website... could you stop please?
@the win7 part... you could get problems if you dont got the right drivers but it would tell you or error out...
the only thing what you could do in my opinion that is is short the pins while battery has been removed
this should effect total emptied phone and hopefully also the memory.... maybe than you are capable to flash/start it...
now if this wont work.. im sorry but im out of ideas and u shud use it to make a new barn or house ;/ im sorry
Didn't know the 1.6 was on the forum, thanks for the cue. I won't talk about that anymore.
Sent from my X10i using XDA Premium App
@ACE_co : I got the same problem. Can't use any SEUS, SE PC because it always fails when repairing. I even tried XIOFUB.rar to unbrick it to back to 1.6. It runs well and finish but with the info message within those commands
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS" ;ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
my xperia has the same problem, when I try to turn it on, a green light flashs, vibrate but it does not turn on I tried SEUS and PCC to repair but did not work, when I try flasher programs I see the
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLAS S" ;ERR_STATIC="UNVALID_COMMAND";
İf you found a solution maybe you can help me
Related
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
Repair using SEUS.
it wont work. just says I already have latest software
Even if you have "the lastest software installed" you can reinstall it.
soldiers33 said:
I have tried to install 1.6 over 2.1 like in the instructions from x10 blog but something went wrong and now my phone wont turn on. The screen just lights up but nothig appears. Please help me fix it
Click to expand...
Click to collapse
The new flash tool 0.2.5, will flash both 1.6 and 2.1. It works a little different, you will need to read through 1st.
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
soldiers33 said:
ive tried the new flash tool and the old. neither work. The old one flashes but same problem but new one wont even let me select the firmware to flash so i cant even try it out properly. and sues just lets me exit it doesnt let me repair like usual
Click to expand...
Click to collapse
1. Try PC companion.
2. Read this guide.
You need to create the ftf file from the sin files, under advanced see bundle creation.
Read the how to.
pc companion wont work as I need to have usb storage but my phone wont even turn on. I have created the ftf files and now flashing, hopefuly it works.
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
soldiers33 said:
still the same . could it be that the cable got disconnected half way through the process? sorry i forgot to mention this. My brother pulled it out. am i doomed?
Click to expand...
Click to collapse
No you are not doomed. Calm down
1. Repair using SEUS (even if it says you have the latest software, reinstall it)
2. If that does not work, try PC companion.
3. If that does not work then use the flash tool. You can use the old version if the new one is not working out for you.
Before you do all of the above, take out the battery and wait 10 seconds. Then, reinstall the battery and try the SEUS. Good luck!
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
soldiers33 said:
the thing is sues wont letme repair it just says exit. Normally you can repair but now it just says exit.
Click to expand...
Click to collapse
OK. Then try the older version of the flash tool. You can find it here.
Does it also say install? If so, press that button. If that doesn't work install PC Companion and try that method.
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
soldiers33 said:
thank you very much everyone for the help. Its finally working. I used the flash unbrick and its fixed im so happy i thought that my money went down the drain.
Click to expand...
Click to collapse
Glad it's sorted out. Take deep breaths now and enjoy your phone!
I sincerely hope this is not in the wrong place, but i do not know where else to put it. I tried to update my x10 running wbcm6 to tw007.2, but apparently in my sleep-deprived haze, downloaded the wrong bb version. when i tried to restart after install, i lost xrecovery, and had no signal and had an unknown bb version. after many attempts to recover, finally resorted to rolling back all the way to stock 2.1 and starting over. was able to succesfully flash at&t 2.1 rom according to flashtool, but now i am stuck in a reboot loop after the boot animation. cannot get seus pc companion to recognize, and neither will flashtool. i am at the end of my wits, this my only phone, and it is currently unuseable...
anyone who has any recommendations would be greatly appreciated. let me know if i can provide any further information...
My turn!
WRONG SECTION AAAAHHHHH!!!!!
This is the meanest forum on XDA.
bobdallama said:
I sincerely hope this is not in the wrong place, but i do not know where else to put it. I tried to update my x10 running wbcm6 to tw007.2, but apparently in my sleep-deprived haze, downloaded the wrong bb version. when i tried to restart after install, i lost xrecovery, and had no signal and had an unknown bb version. after many attempts to recover, finally resorted to rolling back all the way to stock 2.1 and starting over. was able to succesfully flash at&t 2.1 rom according to flashtool, but now i am stuck in a reboot loop after the boot animation. cannot get seus pc companion to recognize, and neither will flashtool. i am at the end of my wits, this my only phone, and it is currently unuseable...
anyone who has any recommendations would be greatly appreciated. let me know if i can provide any further information...
Click to expand...
Click to collapse
Sounds like what happend to me when flashing custom kernels to MIUI ROMs.
Something wrong with the chargemon with the problem I was having.
But for you. Dunno.
You've tried re-flashing firmware but cannot get flashtool to recognize your phone?
Try taking the battery out, then get flashtool set up, plug everything in and hold the back button, and then put the battery back in and continue to hold the back button.
Sometimes, it takes a bit for the 'puter to recognize the phone with flashtool because it's had the USB ID re-assigned. Mine (on windows 7) will re-install the USB driver when I'm having severe issues.
andrewddickey said:
Sounds like what happend to me when flashing custom kernels to MIUI ROMs.
Something wrong with the chargemon with the problem I was having.
But for you. Dunno.
You've tried re-flashing firmware but cannot get flashtool to recognize your phone?
Try taking the battery out, then get flashtool set up, plug everything in and hold the back button, and then put the battery back in and continue to hold the back button.
Sometimes, it takes a bit for the 'puter to recognize the phone with flashtool because it's had the USB ID re-assigned. Mine (on windows 7) will re-install the USB driver when I'm having severe issues.
Click to expand...
Click to collapse
the battery trick worked. i too am running windows 7 (64) and when i was finally able to get flashtool to recognize the phone, then it went without a problem. thank you so much! back up and running wb cm6 tw008! faster than ever!
bobdallama said:
the battery trick worked. i too am running windows 7 (64) and when i was finally able to get flashtool to recognize the phone, then it went without a problem. thank you so much! back up and running wb cm6 tw008! faster than ever!
Click to expand...
Click to collapse
WOO-HOO! for solving a problem in the dev section before moved or anyone else hootin'&hollerin'!
Wrong section, dude
letterman12 said:
Wrong section, dude
Click to expand...
Click to collapse
See what I mean?
It is funny to me when people just say "wrong section" but offer no useful advice. Seems just as easy to say nothing and just let us work it out. And who knows? Maybe someone who is dealing with an issue caused by android development (see current section) will think to look in the same place for a solution. It's a big circle!
Sent from my X10i using XDA App
bobdallama said:
It is funny to me when people just say "wrong section" but offer no useful advice. Seems just as easy to say nothing and just let us work it out. And who knows? Maybe someone who is dealing with an issue caused by android development (see current section) will think to look in the same place for a solution. It's a big circle!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Amen brotha!
...now I'm just spamming......WRONG SECTION!!!!!
MODS>>>>>PLEASE MOVE TO Q&A!!!!!!AHHHHHHHHH!
wow. solved before it got moved ? :L
also, i was gonna suggest reboot your darn x64 bit comp, and the take out your ****fy battery, and then plug your usb cable in the hole and hold the back button and reflash with flashtool, but when it says flashing, then insert battery while still holding the back button. its a common issue after one flash for x64. happened to me several times, when the x64 bit comp won't detect, so i had to reboot.
now, MOD PLEASE MOVE
Moved to proper forum.
that is interesting information to know. i will definitely keep that in mind when flashing in the future. appreciate that
Hey guys,
I have an x10i that just went dead one day, I thought it needed a software re-install so I did it. Now it wont turn on and I just get a quick green blink and a vibrate when I turn it on. Ive flashed it 10 times via sony update too and pc companion and flash tools. I dont know what to do, any help would me much appreciated.
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
beau420 said:
Download SEUS from Sony and flash. Make sure it is fully charged and make sure you are using the right USB cable and try using several different USB ports on your computer if the first one doesn't work.
Click to expand...
Click to collapse
Thanks for the response, I have a fully charged battery and just re-flashed with still no luck. What did you mean about the "right usb cord" ?
Thanks again.
I mean reflashed with SEUS (not PC Companion) and by right USB cord, I mean the one that came with the phone. Or if you have the possibility, try another one.
Tried with 2 different usb cords and on 2 different cpus. I think Im S.O.L
One more question, after a flash how long does it take for the xperia to boot up?
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
beau420 said:
During a flash with SEUS it tells you when the phone is rebooting....same with the Flashtool.
Screen turns on...still black...then Sony logo, then your bootlogo followed by desktop.
http://www.youtube.com/watch?v=HmX-IYNYqL8
Is it successfully flashing using SEUS or flashtool? Does it actually flash and then not boot? What does it say when you flahs using the flashtool?
But again, if the flashtool isn't working, you are going to have to use SEUS to get back to scratch. Run it as Admin...let it boot up and do nothing to the phone for at least 2 minutes. Do not swipe or move a thing....let it settle down.
Some of you people who ask for help really don't provide much information at all.
To me it looks like a wrong firmware problem... version you have installed isn't the same as kernel.
I would flashtool....root....turn off phone....SEUS full reflash....
Click to expand...
Click to collapse
When the flash finishes up it says to turn on the device and the start up may take some time, Ive let it sit for hours and still nothing. IDK what the hell is wrong with it.
K well I give up. Ive tried 3 more times using a cpu with xp and still the same thing.
If any one else has had this problem please let me know.
looks like the faulty motherboard issue to me, some users are experiencing this problem, if you have warranty get a new phone if don't then i don't know what else can you do :/
Great. I have no warenty so looks like I'm screwed.
Sent from my HD2 using XDA App
Is there any way to fix the mother board issue ?
Dont mean to beat a dead horse but....... HELP!!!!
my x10i v2.3.3 batt was running low at 8%... so i turn it off from my work place... when i reach home and turn my phone on, my phone only vibrate abit and nothing was happen... so i tot my phone battery is flat so i when to charge it... but when i charge the phone nothing happens too.. i try take out the batt and put it back afew times but still not working... so i tot is my software facing problem and i use PCC and SEUS to repair... but it say can't install update try again.. i do it around 3 to 4 times... but still the same.. now my phone when i press on it blink green led once and nothing happen... but when i plug in my charger, the led turn green but in black screen... so can any1 help me fix tis.. thanks...
Hey, 'm facing the same issue
Recently i upgraded my Xperia to "ThGo2 v16.0" from custom rom..
After some time the rom got unstable and restarted the phone, however it wouldn't boot up. Now i have completely black screen, all the time, with few red blinks
(I have tried all the solutions here:
1. SEUS : Says ur phone is already update and show Xperia arc in backgroud. No update available
2. PC companion: Tried all the tricks to start w/o connecting n all still the phone is not detected.
3. Flashtool, tried flashing it with 0.6.8 and 0.2.9.1
4. I have also used other tools like superclick, root / unroot and S1 tool (no of them worked)
Now, nothing is working with few red blinks and gree light..
Please help, my phone is converted into a black paper weight now....
Use pc companion. Or flashtool
Sent from my X10 using xda premium
Nopes
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
surajpardeshi said:
I have tried all the method, right from SEUS, PC Companion and flash tool nothing is working.....
Is this an Hard brick, case, one of the technician suggested me an full flash through box, for which he will charge me INR 1500 (USD 30)...what do you think ?
Click to expand...
Click to collapse
U from India? Know hindi?
Sent from my X10 using xda premium
Me too BRICKED or Semi Bricked.... =(
First fail PCC
Then PCC Repair fail too
SEUS fail.
Took to different computer that was finally able to flash 2.1.1 update last year.
Clean install of pcc and seus Both still fail
In fact pic with yellow is from that fail & all others (Using Flashtool) except X10a_2.2.1.A.0.6_Rogers.ftf I get regular triangle with ! over top of phone pic after SE I've exhausted ALL my efforts and need guidance. I am super broke right now, so repair shop not good option. Two shops here in town say they will try, but NO PROMISES and still must pay for time
NEED True rescue fix here
Hindi yes
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
surajpardeshi said:
Yeah, I'm from Nashik, India, but I visit Mumbai frequently..
You, know any place where I can get this done in a cheaper way.....
Click to expand...
Click to collapse
Right now i am bit busy. I will upload a pic for u as soon as i get free.
Sent from my X10 using xda premium
Using pcc... Even on "no phone connected"
Help us!!!
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
enzo1984316 said:
Can any1 out there help us fix tis problem or tell us what happen to our phone... or izzit our X10i is hopeless????
Pls help us....T_T
Click to expand...
Click to collapse
Did you try to read the above post at all?
Sent from my X10 using xda premium
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
enzo1984316 said:
i try PCC, SEUS and FLASHER.... All cannot work... i dunno what to do now...
btw... when my phone won't turn on that time my batt is low(Cos cannot charge) and debugging mode is off... izzit this problem make me can't do repair and reflash???
Click to expand...
Click to collapse
Charge your battery using another x10 or any external charger
Sent from my X10 using xda premium
FIX!
I had the same issue when I was experimenting with ROMs and Recoverys, but not to worry, Sony PC Companion 2.1 does the trick!
Download PC Companion 2.1 from the Sony Mobile website
1. When you download and open it, click start under Support Zone
2. Click start under Phone Software Update
3. When the window saying that a phone could not be found appears, click repair phone
4. A windows like this will appear, click continue to proceed with the repair of the firmware
NOTE: All data that is placed on the phone memory will be wiped but any data saved on the memory card will be spared
5. After clicking continue, a window like so will appear. Tick the box and click next to continue with repair!
6. Sony PC Companion 2.1 will now prepare the computer for the firmware update
7. Now choose your phone model, in this case it should be the Xperia X10 (X10). Select the phone and click Next!
8. Follow the prompts to repair your phone!
GOOD LUCK!!
Always fails for me.
All process end in fail
There must be a file I need to rename or something....
tried everything now...
I have tried everything by now, here i have attached a attachment of error i get while repairing my phone through SEUS..
only option is box flash, but i think its kind of risky...
Fail fail fail..... i'm getting hopeless wif my X10
Hey,
I did some re-search and got to know that somehow my X10 flashes as So-01C in some systems, i.e. xperia arc, even while updating ..........
Anyone here, knows other ways to flash through box other than technician, coz these technicians are real idiot they can crap your phone in 10 seconds, so its better to crap it yourself...
"alternative to box flash, please ???"
Try this
Had the same problem once, when my phone would not start at all, all I had to do was connect it to the PC Companion (2.0), at first it wouldn't repair but after a certain amount of tries it did the trick,
First: Make sure all your drivers are installed, if they were installed there should be no problem.
If they were not, the computer cannot identify your phone, try installing some other x10's drivers (cause your's is bricked I assume) that might do the trick aswell.
Open PC Companion > Support Zone > Phone Software Update (Start) > Follow Instructions > Repair
It might take several tries to get it right
If this doesn't work try the latest flashtool, it should do the trick !!
There must be something you are not doing right, else SEUS/Flashtool should have worked like a charm.
see i get this reply, when updating x10..
I have tried this like thousands of times, installing roms and then removing them and repairing the phone, but this time it has gone over my head........
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)