I'm currently using a USCellular (CDMA) Touch Pro2, on a GSM network (Viaero wireless, in Nebraska). In WinMo, everything works fine, and when I boot into Android everything that should work does... except... Anytime it sleeps, it drops it's connection to the GSM network and doesn't connect till I wake it. That means any calls, texts, emails, etc that come while it's asleep don't show till I manually wake it (or in the case of calls, they go to voicemail). I've tried searching, to no avail, so I was wondering if any of you smarties can help. My startup.txt is as follows
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
set cmdline "lcd.density=240 msmvkeyb_toggle=off gsensor_axis=2,1,3 force_cdma=0 board-htcrhodium.is_cdma=0 pm.sleep_mode=2 physkeyboard=rhod400"
boot
the pm.sleep_mode=2 was based on advice I found by searching and tried, but no dice, still dropping... it was set to 1 before...
Any ideas? I would LOVE to run Android as my daily, and AFAIK this is the only thing stopping me...
I don't know it will help, but on any recent kernel I believe you should use sleep mode of 1.
board-htcrhodium.is_cdma should be 1. F
Holograph said:
board-htcrhodium.is_cdma should be 1. F
Click to expand...
Click to collapse
I had it that way, but when I did it wouldn't see the GSM at all, it would try CDMA, and then fail and drop into airplane mode... That's when I tried setting it to 0, and was able to get a consistant signal, except for the sleep issue...
Thank you for your reply!
snalbansed said:
I don't know it will help, but on any recent kernel I believe you should use sleep mode of 1.
Click to expand...
Click to collapse
As I had said, it was at sleep mode of one, and I got the dropping. Based on my searching there was a suggesting of using 2, or even 3 on that, so I did, still didn't help...
Thanks though!
Seems like a bug in the newer kernels. I have a RHOD400 and do not have this problem at all, but it seems a lot of people are using their CDMA devices on GSM networks.
I've had a lot of reports from folks that are doing that, so try an older kernel. You'll lose camera support, but in theory this bug will not be present. I'd like you to help narrow it down if you can, to which kernel it starts in.
arrrghhh said:
Seems like a bug in the newer kernels. I have a RHOD400 and do not have this problem at all, but it seems a lot of people are using their CDMA devices on GSM networks.
I've had a lot of reports from folks that are doing that, so try an older kernel. You'll lose camera support, but in theory this bug will not be present. I'd like you to help narrow it down if you can, to which kernel it starts in.
Click to expand...
Click to collapse
Well... I switched to the kernel you posted here ( http://forum.xda-developers.com/showthread.php?t=885550 ) and that problem seems to be gone! Did get a SOD last night, but the signal seems consistant most of the time...
small glitches here and there, (market sometimes won't install apps, downloads, but hangs on instal, and a few system crashes that reboot to no service) but otherwise smooth sailing!
sooooooo... tonight I've been getting a ton of system crashes, usually when on the market, complete with relaunching in airplane mode, which is annoying... Anyone else getting these, or is it just me? Also, as I said before, 4 out of 5 times the market won't install... It'll download fine, just hang on installing and never finish... it takes a full reboot to enable me to try again...
Been getting a few more "program unresponsive" dialogs than I would hope, and on my Hero I would have run a fix permissions from ROM Manager, but I can't get it to install... Any ideas?
I truly do appreciate the help you have been giving me!
driftin said:
sooooooo... tonight I've been getting a ton of system crashes, usually when on the market, complete with relaunching in airplane mode, which is annoying... Anyone else getting these, or is it just me? Also, as I said before, 4 out of 5 times the market won't install... It'll download fine, just hang on installing and never finish... it takes a full reboot to enable me to try again...
Been getting a few more "program unresponsive" dialogs than I would hope, and on my Hero I would have run a fix permissions from ROM Manager, but I can't get it to install... Any ideas?
I truly do appreciate the help you have been giving me!
Click to expand...
Click to collapse
Kinda stealin your own thread at this point .
Are you on FRX05? Not sure if you said what build you are running... these kinda questions should go in the build thread tho TBH.
With that said, I would delete the data.img and start over. This will remove all the user stuff you've customized - basically starting clean.
dude i have the same problem on my rhod500, right now im using the tiad froyo x + the test kernel that arhhgggggg post from wilt2tilt and everything is working fine, try with that and let me know. the kernels from the autobuild site have the signal lost bug in my phone too
Related
My installation has been working fine and I even managed to increase battery life by installing "Juice".
Suddenly, about 3 days ago I noticed the phone was saying no signal. I was clearly getting data, as my apps worked and I was getting eMail alerts and downloads, but no calls.
I tried restarts, but to no avail. I am using Rod_100 UK as I am on Vodafone UK... I assume it is correct, certainly worked for the past month.
I have had to revert back to Windows Mobile.
My immediate thoughts are it is Juice that is causing it. I have just logged back in to my XDAndroid to write this and Juice did not load, and guess what, the signal has come back.......
Just in case is there anything else to look for?
Never heard of "Juice". I have heard of JuiceDefender however...
If you don't have the issue on a clean install, I'd say that app (or one of many I'm assuming you have installed) is the culprit. Rename your data.img and boot, see what happens.
Yes, it is JuiceDefender, apologies for the abbreviation.
I un-installed it and I have network again, but I guess I will loose battery longevity again, not that it made a huge difference.
I'll keep my eye on it....
Still no improvement
No, still not working. I get no signal, when I am in eye shot of a mast and on WM I get a full signal. I am booting in to WM to a deluge of SMS messages that I had not received, mostly vMail notifications, to which the messages are from calls that I did not receive.
The radio is not as strong and keeps dying on me requiring a reboot
I dont know what exactly but some program is giving android problems
jonners59 said:
No, still not working. I get no signal, when I am in eye shot of a mast and on WM I get a full signal. I am booting in to WM to a deluge of SMS messages that I had not received, mostly vMail notifications, to which the messages are from calls that I did not receive.
The radio is not as strong and keeps dying on me requiring a reboot
Click to expand...
Click to collapse
All I can say is do the standard mess.
Make sure you're up to date.*
Delete (move, rename) data.img.
Format SD. Full format. HP tool.
*There's a lot of testing stuff flying around right now too, making that difficult admittedly. Hopefully the auto-build service will return soon, and all the madness will get committed soon!
Check in your startup file forcecdma=0. I had that problem too.
wormy315 said:
Check in your startup file forcecdma=0. I had that problem too.
Click to expand...
Click to collapse
The command is force_cdma=X....
arrrghhh said:
The command is force_cdma=X....
Click to expand...
Click to collapse
OK, I have tried deleting the data.mag
Didn't work
Have just changed "force_cdma=0" to "force_cdma=X" Will see if this works and feed back
My gut feeling is it is something to do with "JuiceDefender".
jonners59 said:
OK, I have tried deleting the data.mag
Didn't work
Have just changed "force_cdma=0" to "force_cdma=X" Will see if this works and feed back
My gut feeling is it is something to do with "JuiceDefender".
Click to expand...
Click to collapse
Uhm, you replace X with a value. 0 if you're GSM, 1 if you're CDMA....
arrrghhh said:
Uhm, you replace X with a value. 0 if you're GSM, 1 if you're CDMA....
Click to expand...
Click to collapse
Well I took it literally, as I have no idea, sorry. I'll put it back... Anyway, I have another problem now anyway. Having made the change it will not boot. I checked the permissions and it is not "Executable" any more. I have tried changing it but it will not let me. How do I fix this - I am accessing via my laptop which is Ubuntu (Linux).
Can you help, please?
jonners59 said:
Well I took it literally, as I have no idea, sorry. I'll put it back... Anyway, I have another problem now anyway. Having made the change it will not boot. I checked the permissions and it is not "Executable" any more. I have tried changing it but it will not let me. How do I fix this - I am accessing via my laptop which is Ubuntu (Linux).
Can you help, please?
Click to expand...
Click to collapse
What is not "Executable" any more... haret.exe?
The startup file
Sorry, ignore me.
After the change, I double clicked the Android shortcut to launch Android, but it would not start, so I assumed the file had to be executable (as it was the only item I had changed)... I had forgotten to disconnect my TP2 from my laptop!
I've done so now and it has launched. A stupid user errorhttp://media.xda-developers.com/images/smilies/biggrin.gif
I'll keep you posted on any changes.
Ha, fair enough. Enjoy.
Solved. Keep loosing Radio
OK. I tried all the above. Delete data.img, and check the startup script/cmd.... none worked. At some point I would loose the network connection.
As it started within days of loading JuiceDefender and its components and from the description of how it works - controls the running apps including radio and data transfer, I always suspected it to be the root cause. After the other checks failed I tried removing all Juice Defender apps and since then c30hrs I have not experienced any loss of communication.
Thanks everyone for your help, and I hope this will be of use to anyone else suffering from loosing radio/ signal.
jonners59 said:
OK. I tried all the above. Delete data.img, and check the startup script/cmd.... none worked. At some point I would loose the network connection.
As it started within days of loading JuiceDefender and its components and from the description of how it works - controls the running apps including radio and data transfer, I always suspected it to be the root cause. After the other checks failed I tried removing all Juice Defender apps and since then c30hrs I have not experienced any loss of communication.
Thanks everyone for your help, and I hope this will be of use to anyone else suffering from loosing radio/ signal.
Click to expand...
Click to collapse
It has been a number of days now and I have not experienced the same issue, so my conclusion is that it is the JuiceDefender that caused the problem.
The down side now is that I get 7am to 4pm battery life as opposed to 7am to 7pm.... But atleast I can receive and make calls!
A note: The signal strength on the project image is not as strong as the WM6.5, but I am sure that is a known issue.
jonners59 said:
It has been a number of days now and I have not experienced the same issue, so my conclusion is that it is the JuiceDefender that caused the problem.
The down side now is that I get 7am to 4pm battery life as opposed to 7am to 7pm.... But atleast I can receive and make calls!
A note: The signal strength on the project image is not as strong as the WM6.5, but I am sure that is a known issue.
Click to expand...
Click to collapse
Hrm, didn't realize that app would help out that much. But, it makes sense if it's turning off all your radios lol.
Anyhoo, have you seen the kernel I posted from WisTilt2? It has full panel collapse, and battery life is astounding with it.
Code has yet to be committed, as he still has some work to do for the AUO panels (select RHOD100's basically) - so unless you have one of those you can reap the benefits of his new code .
(bzo got nearly 65 hrs with the radio on, sync off - 100% sleep.)
Looks interesting, but where do I download the latest version... I don't plan reading all the threads! And IF I installed would I loose all my settings and apps?
Update
It has been a while since I did all this tinkering, during which time there has been an update.
What I find I get is sometimes (c every couple of days) the meter says I have signal but nothing connects with a message "no network". Also, but far more frequent, as with today where it has occurred 3 times, I dial a number and nothing happens. It says ringing but there is no ring tone and it never seems to connect. I then shut the call down either by using the hang up button or the soft hang up key. The screen then changes to "Hanging Up" but again sits there indefinitely. The only solution id to do a restart.....
Any ideas?
PS: any news on when the bluetooth and camera will be working...?
I have found that any app that acts as a task killer of any sort (juice defender must in someway stop apps to save battery) can also kill your connection. I found this out while using xdandroid and it became immiediately clear when I stopped using the task killer my bars and data proved to be more consistant! Hope that helps.
-------------------------------------
Sent via the XDA Tapatalk App
Thread has moved to this location: http://forum.xda-developers.com/showthread.php?t=950383
huge problems...
seconds after booting froyo it freezes on the home screen. this has always been an issue for my with froyo and has never ever happened with gingerbread.
This is a top that started seconds after showing the home screen, however I can't seem to copy and paste it.
This has always happened to me when using froyo, never on gingerbread. However I want to be able to use the 'functionality' of froyo as most things i would like to use are not present in gingerbread.
Managed to pull all the logs possible. See attachment, this was all in /Data/System/Dropbox/
Otherwise i cant run any commands after it freezes up.
From what I can tell there are some interesting results from the processes in the .gz log file
relpath should be written like this: rel_path
p.s you can rename the title of the thread by clicking "go advanced" after you click edit
Which Froyo freezes on homescreen? XDAndroid or Froyo X?
I've never been able to run XDAndroid properly, it ALWAYS get stuck on the homescreen and you must restart over and over and over....
Froyo X runs awesome, with the latest kernel is very stable and run pretty smooth
nickleby said:
Which Froyo freezes on homescreen? XDAndroid or Froyo X?
I've never been able to run XDAndroid properly, it ALWAYS get stuck on the homescreen and you must restart over and over and over....
Froyo X runs awesome, with the latest kernel is very stable and run pretty smooth
Click to expand...
Click to collapse
FRX04 should work great on any phone supported, assuming you follow the directions correctly...
maybe hw3d stuck your device like overclocking CPU,try to delete hw3d=1
doing exactly the same thing with froyo X red works perfectly
I had this issue since XDAndroid FRX03. And today finally found a solution.
Since FRX03 something is broken with GSM+3G. When booting with force_cmda=1 (resulting no network) or in airplane mode android works fine.
Enabling "Use only 2G" in android kinda work, but this option wont stick (see here: http://forum.xda-developers.com/showthread.php?t=711753 ).
Best solution is to disable 3G in WinMo.
You can read here how: http://forum.xda-developers.com/showthread.php?t=319208
Now I have FRX05 with old data.img from FRX02 working fine
I'vetried to select 2G only and the setting never sticks here either. reading that thread implies that the fix was already committed tho. Did I misunderstand, and he committed to some other repo than XDA is using?
I think this might not have been commited to XDAndroid, but only to "Super FroYo 2.2". However when I disabled 3G in WinMo, "Use only 2G" is grayed out in Android.
set aeroplane mode in winmo. Went into froyo and set aeroplane mode there also, restarted without the freezing issue disabled aeroplane mode and it hasn't froze since. 5 restarts...
i'm finding this post interesting as I dont have service (except wifi) and have been unable to get anything other than a frozen android device (cant call it a phone wthout service!) mine is a rhod500.
Guess I'm try to get it into airplane mode and see if I can regain control of my machine (kinda wish i had not deleted the old data.img now during my 'debugging')
cyryl said:
I think this might not have been commited to XDAndroid, but only to "Super FroYo 2.2". However when I disabled 3G in WinMo, "Use only 2G" is grayed out in Android.
Click to expand...
Click to collapse
You were right, it wasn't committed to XDAndroid. In fact there were a lot of fixes on the original repo that were never committed to XDAndroid. I've set up a clone and merged them all in here:
http://gitorious.org/~hyc/xdandroid/hycs-hardware_xdandroid-ril/commits/androidhtc1
I also fixed several bugs that weren't fixed in either of the previous source trees as well (mostly memory leaks). So far it's working well on my phone, but it will be a few hours before I know if the SoD problems are gone. I've also attached the binary here if anyone else wants to try it out.
Please continue the discussion in the new thread
http://cleanimport.xda/index.php?posts/12401881/
8 hours later with 3G enabled, no SoDs. Looking good.
arrrghhh: This update's for you, it should now give proper 1x indication for CDMA 1xRTT.
highlandsun said:
arrrghhh: This update's for you, it should now give proper 1x indication for CDMA 1xRTT.
Click to expand...
Click to collapse
lol, just get netloc working and you'll beat WisTilt2 to the punch .
arrrghhh said:
lol, just get netloc working and you'll beat WisTilt2 to the punch .
Click to expand...
Click to collapse
The only thing I'm not sure of is the CDMA roaming indicators, no idea how those values are computed.
arrrghhh said:
lol, just get netloc working and you'll beat WisTilt2 to the punch .
Click to expand...
Click to collapse
OK, since you mentioned it. Code now does netloc parsing. But since I don't have a CDMA phone, I have no idea if it actually works... If you have a CDMA phone and are willing to test this library, please grab a copy of "logcat -b radio" starting from as early as possible in the boot, to a couple minutes after boot finishes, and paste it up somewhere I can see it. Thanks.
highlandsun said:
OK, since you mentioned it. Code now does netloc parsing. But since I don't have a CDMA phone, I have no idea if it actually works... If you have a CDMA phone and are willing to test this library, please grab a copy of "logcat -b radio" starting from as early as possible in the boot, to a couple minutes after boot finishes, and paste it up somewhere I can see it. Thanks.
Click to expand...
Click to collapse
code version to Thursday March 24 2011, when I browsing WEB thought 3G network , phone call in, I can not accept or reject.
I will try the newest version
OK , I confirm have this problem
muziling said:
code version to Thursday March 24 2011, when I use 3G to browse WEB, phone call in, I can not accept or reject.
I will try the newest version
OK , I confirm have this problem
Click to expand...
Click to collapse
Are you using Froyo or Gingerbread? Can you get a "logcat -b radio" for your session and send it to me?
Since upgrading to the EB01 Froyo leak (debinged/deodexed) I have wifi issues where every 3 or 4 times I attempt to enable it, it will fail, and show "Error" under the Wi-Fi settings (where it ususally says in blue text "Turn on Wi-Fi", "Connecting..." "Connected to <network>", etc). I finally got the log message associated with it, and was wondering if anyone has figured out a way to address this?
From what I gather insmod is the kernel's mechanism for (in this case) loading the wifi driver, so this would be an issue with the kernel? So now what?
E/WifiHW ( 2467): return of insmod (args:firmware_path=/system/etc/wifi/bcm4329_sta.bin nvram_path=/system/etc/wifi/nvram_net.txt dhd_watchdog_ms=10 dhd_poll=1) : ret = -1, Invalid argument
At first I thought a reboot was necessary to get it to attempt to reload the driver, but I've since found clearing level 2 ram in the task manager does the trick. Still a big PIA though.
Thanks for any help.
Kidd_Funkadelic
I had the same problem until I flashed the EC10 kernel, hasn't happened since.
AlgorithmX said:
I had the same problem until I flashed the EC10 kernel, hasn't happened since.
Click to expand...
Click to collapse
So, if I'm not mistaken I can just install the non-voodoo zip w/ Red CWM directly over EB01 with no wiping/cache clearing, etc, and be up and running with no data or configuration loss? Sounds like a pretty quick and easy way to fix my issue.
I haven't been following the EC10 thread, but I just took a look and looks like the static issue when the screen comes on during a call is fixed as well, the only other issue I've had.
Guess I may have to give it a shot! How long have you been using it?
KF
I've been using it for a couple days and have to say that it combined with SuperClean 2.9 has made my phone super smooth. I haven't found a single glitch so far.
Took the plunge and updated to EC10 last night. I've had only a brief time to play around with it, but so far so good with the wifi. Thanks for the help!
Could just be my mind playing tricks on me, but I could swear in general everything is more responsive as well... Not only loading apps, but when I brought up navigation this morning I've never once seen it lock on and start driving directions this fast.
Nevermind... Same problem still with EC10. Got my hopes up there for a minute.
I got the same problem with SC 2.9.2v and had with any other SC Froyo build. I'm using JuiceDefender so WiFi is turned on/off lot of times (every 15 minutes on schedule or when screen is unlocked). Usually once or twice a day I find that there is an error with WiFi and the only way to fix it is to wait couple of minutes and try turning it on manually or switch to airplane mode on/off.
I also use JuiceDefender w/ Wifi. If it doesn't occur less often with EC10 (too soon to tell still), I'll have to disable the wifi controls in JD so it's toggled on/off far less frequently.
Glad to see I'm not the only one seeing it. I bet the JD users will just notice it more since we are loading the wifi driver all the time.
Kidd_Funkadelic
And thanks for the airplane mode tip- I'll have to try that. I was clearing level 2 ram in task manager to do it. AM would be slightly more convenient.
jt1134's source build EC10 didn't help, still having same problem with WiFi. My log is showing the same thing.
At least the new kernel fixed the static issue. One thing at a time, right? I hope that this means there will be ED01 kernel drop
Actually, maybe April Fool's day is a bad choice...
What radio are you using? EB01?
Yes, I did the full Froyo update to EB01 over the stock 2.1 Verizon eclair, then installed the EC10 specifically for this issue. That's all I've done. Oh, went back into CWM after seeing the problem for a few days to clear the Dalvik cache. That's all I've done to date...
OK so it's not radio related but kernel/rom then. I'm on EA28 radio cause I had problems with missed calls with EB01.
Solutions? Bump?
Sorry for reviving this thread, but I have what I think is the same problem (on EB01).
My wifi always works after a reboot, but then if I turn it off and try and turn it back on, it gives me an error message until I either
A) reboot the phone
or
B) repeatedly turn it on and off again (usually takes 3 or 4 times to work again)
Anyone else having this specific problem or know how to fix it?
jbjcurly said:
Sorry for reviving this thread, but I have what I think is the same problem (on EB01).
My wifi always works after a reboot, but then if I turn it off and try and turn it back on, it gives me an error message until I either
A) reboot the phone
or
B) repeatedly turn it on and off again (usually takes 3 or 4 times to work again)
Anyone else having this specific problem or know how to fix it?
Click to expand...
Click to collapse
I was able to get rid if the problem by using Auto Killer Memory Optimizer. It turned out to be a memory issue. Use one of the preset profiles, like aggressive, and see how you do. I was having the problem several times a day and it never came back.
Or, upgrade to PWGB, which takes care if the problem too and doesn't require messing with memory mgmt settings...
i just recently flashed the comrom v.0.1 but then my phone wouldnt connect to 3g. it could make calls and connect to wifi, but doesnt connect to 3g. after i got off from a call i received, it was connected to 3g for about 10 seconds, but went back to normal after 10 seconds. I did flash the ec09 modem/radio, but still the same problem. Thank you for your help
I've been experiencing similar problems but with Com rom 2.1, however my 3g data is sporadic at best, I'll have data for a few minutes then it will drop, then I'll get it back a handful of seconds, sometimes even minutes later, it's rather annoying since it prevents me from doing even the simplest of tasks with my phone. I've tried flashing to the EC09 modem hoping that it was an issue with the modem but it looks like it probably isn't. I've heard that it could possibly be fixed by doing an ESN swap, but then again the results were mixed, it worked for some, and then for others it'd do absolutely nothing.
and how will i do that? and my phones not connecting to 1x nor 3g,
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
DaleV said:
I have had very good results with dialing *22899 send, it doesn't do the voice, after it rings press option 2. Let it finish, you'll get a commit successful message and have to let phone reboot. After it reboots do it a second time, it says it set lock code and.lock password, idk what those are, but 3g works really good for me after that.
Sent from my EC09 UKB GB Fascinate.
Click to expand...
Click to collapse
If this doesn't work try pulling the battery as well.
If that still doesn't work you may have to go this route:
http://forum.xda-developers.com/showpost.php?p=15399649&postcount=25
I know I wrote this based upon the assumption that the issue was the conversion to MTD, however that may not be the case. Before trying this, if you post a logcat I can look at it and tell you if you are having the same issue that I was.
Jp
and how would i post a logcat?
i think this is the logcat you were asking about, i didnt know which portion you needed, so i posted all.
Well, I can tell you that you are not having the same issue that I experienced. So, I don't expect that re-activating your phone using the method I described will have any effect. If all else fails, you are welcome to try it but I don't anticipate that it'll work.
From looking at your logcat, I saw a connection attempt that failed and a second that appeared to be successful. I could be wrong about the second one as I am still trying to figure out exactly what I'm looking at. Someone with a little more experience may be able to get more out of your log.
Sorry I couldn't be more helpful.
Jp
This wifi driver kernel module "disables" the wifi maximum power management during screen off. The level 2 driver adds it further, changing power saving to off, while on battery power. Hopefully it could increase the wireless strength -- I am testing it.
DISCLAIMER: I am not responsible for any damage caused by the updated kernel module, neither its compatibility. I don't think it would work for any other ROM other than stock 360. Also, make sure you had the bcm4325 wifi instead of bcm4329.
Use at your own risk, always do nandroid backups
To update, either use ClockworkMod or StreakMod recovery, and use any of the attached zip file as update.zip.
Alternatively, you can just replace the /system/lib/modules/dhd.ko and reboot the system.
PS: Thanks to Myshkinbob's hint on http://forum.xda-developers.com/showthread.php?t=752856
WOW , while i was playing with the cifs another wonder came, i do confirm the cifs module works perfect [on 360], am on the process of testing these modules too, streak-custom-ROM-cooks i appeal you to include these modules in your 2.2 based ROMs.
Thank you again !!!
StreakOwners show sreakLove to this dev. {Thanks}
Sent from my Dell Streak using XDA App
Wifi streaming is now working flawlessly with screen turned off. The no power saving configuration on battery doesn't seems to improve the signal much. But it doesn't seems to have any significant increase on battery usage, so I suggest to just go for the level 2 version.
Gonna ask the obvious before someone else does
setting wifi sleep to 'never' doesnt accomplish what you want? What happens exactly if you set it to 'never' without loading your module? Is it as described in your link where it goes down to ~100kb/s link speed?
Wonder if porting to another kernel is as simple as using it's matching config.gz like with tun.ko or cifs.ko(?)
TheManii said:
Gonna ask the obvious before someone else does
setting wifi sleep to 'never' doesnt accomplish what you want? What happens exactly if you set it to 'never' without loading your module? Is it as described in your link where it goes down to ~100kb/s link speed?
Wonder if porting to another kernel is as simple as using it's matching config.gz like with tun.ko or cifs.ko(?)
Click to expand...
Click to collapse
No it doesn't -- it is unrelated, actually. The bandwidh limit imposed by maximum power saving is much less than the required bandwidh for streaming FLAC audio. The result is intermittent audio playback with repeating 2-5 seconds silence and audio pattern.
Not to mention that I occasionally experiences IM+ Google Talk, YM, and Jabber session disconnects due to the same problem
Whoops sorry double posted
Any chance of building one of these for 2.3?
I use Advanced WiFi lock from market. It,s Free and work just fine.
lordmorphous said:
Any chance of building one of these for 2.3?
Click to expand...
Click to collapse
I haven't personally tried Gingerbread on my Streak. Probably will never do so due to reasons I won't post here.
But I could probably try building them, although I'll need your help on a couple of info needed.
muteman3 said:
I use Advanced WiFi lock from market. It,s Free and work just fine.
Click to expand...
Click to collapse
I believe an app could also prevent wifi to enter max power saving mode on screen off. But to make sure it does, then you have to try streaming some lossless audio with it
I'd be willing to help, but have decided to forego gingerbread for now. One too many random reboots. However I'll help you out as much as I can for the good of the masses.
Sent from my Dell Streak using xda premium
lordmorphous said:
I'd be willing to help, but have decided to forego gingerbread for now. One too many random reboots. However I'll help you out as much as I can for the good of the masses.
Sent from my Dell Streak using xda premium
Click to expand...
Click to collapse
As you're not currently running 2.3 then I assume you're not in hurry for this. We can schedule it later then
Anyway I don't think many people needs this tweak, so let's just take it easy. Just post back when you're ready with a Streak running 2.3.
Sorry but I should've been able to do this by myself if I had 2.3 installed on my phone. But as stated, I don't have any plan for that
watch_mania said:
As you're not currently running 2.3 then I assume you're not in hurry for this. We can schedule it later then
Anyway I don't think many people needs this tweak, so let's just take it easy. Just post back when you're ready with a Streak running 2.3.
Sorry but I should've been able to do this by myself if I had 2.3 installed on my phone. But as stated, I don't have any plan for that
Click to expand...
Click to collapse
I'm back on the gingerbread bandwagon, however I am having wifi issues and I wonder if your fix can help. Randomly, but quite regularly, the wifi still shows as connected, however there is no data throughput. I'm wondering if it possible that the wifi "power down" is going to low and then not powering back up when the screen comes back on. Would your fix help with that at all? If so, I'm ready to help with it for gingerbread.
can u make one for 354? thanks
lordmorphous said:
I'm back on the gingerbread bandwagon, however I am having wifi issues and I wonder if your fix can help. Randomly, but quite regularly, the wifi still shows as connected, however there is no data throughput. I'm wondering if it possible that the wifi "power down" is going to low and then not powering back up when the screen comes back on. Would your fix help with that at all? If so, I'm ready to help with it for gingerbread.
Click to expand...
Click to collapse
Yeah, same issue on d_steves 2.4.3 build.
A fix for this would be fantastic!
up.. can u make one for 354, please?
wifi drivers
can anyone provide me with wifi drivers for 2.3? i have had no wifi for around 6 months and cant bear it no more!
i get a wifi drivers not loaded on the logcat, have tried everything i can manage in my limited adb capabilities, dont think its a hardware issue but want to try something/anything before selling my streak! changing roms, wiping and factory resets have not worked.
anyone??!!
iu1nguoi said:
can u make one for 354? thanks
Click to expand...
Click to collapse
Just flash the 360 ones on 354. It worked fine on mine
Sent from my GT-N7000 using Tapatalk
i tried.but it disabled my wifi
Raz-or,have you tried putting the 360 update.pkg on your root sd card,then run your phone through the qdl tool......after that....start your phone up in stock recovery,and it will install the 360 you put on sd,then upon reboot go back into stock recovery and do a factory reset......after your up and running,wifi should be working now.after doing this....you could put streakmod recovery on....so you can go back in and do a nandroid backup,and be able to do other things it can do
Sent from my Dell Streak using XDA App