Related
My xda 2 is stuck on the bootloader and wont do anything after trying to reset it ive tried i think everything that i can possible do and i read most of what was offered yet its still stuck on the bootloader. I tried to upgrade from v1.60.... to the latest at v1.72.187 uk o2 . Please help ><
Have you tried resetting your device, placing it back in the cradle and re-running the upgrade?
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Shadow786 said:
I have tried reseting but it fades then reappears disallowing me to run the upgrade 'Xda_II_172187_Final' but i have downloaded another which sizes around 512kb but this says that the rom image is not present. :/ can u link me to another upgrade if it may help
Click to expand...
Click to collapse
Exactly which upgrades have you attempted? What happens when you run the XDA_II_172187_Final upgrade?
What is the 512kb upgrade you mention?
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Shadow786 said:
I used 'himaupgradeut_197.exe' after the 'Xda_II_172187_Final'.
'himaupgradeut_197.exe' was the 500kb file which gave me the error
that no rom image was found and the 'Xda_II_172187_Final' was the only 1 that i used to upgrade and that says it cannot connect to the device ...make sure its connected.
Click to expand...
Click to collapse
The HimaUpgradeUt_197.exe file is not an upgrade it is a version of the upgrade program. It still needs to be used with all the other files that form part of the upgrade process.
As regards the connection error, make sure you are in bootloader mode (by pressing Jog button and Power button at the same time as pressing reset) before retrying the upgrade. Also make sure the USB cradle is plugged directly into a USB port on your PC and not through a hub and that the power supply is connected to the cradle. It may help to make sure that ActiveSync isn't running also, as it is not required for upgrading.
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Shadow786 said:
Isnt it already in bootload mode? if not i dont know where the jog button is Also i just realised i didnt have my cradle its own powersuplly which i have done just now but i dont want to carry on witht upgrade is there a way i can just make it back to normal ?
Click to expand...
Click to collapse
It sounds like your device is already in bootloader mode - my suggestion is just a 'failsafe' The Jog button is the multi-directional button at the bottom centre of your device.
I don't think it is possible to 'go back' to normal as if you never did anything. With the power connected properly there is every chance an upgrade will now work. You can, of course upgrade using the original ROM version, if you know what that was.
hmm its still done a restart and yet it doesent seem to connect. When i restart the xda 2 its still in bootload mode when i place it in cradle still in bootload mode and i still get the same errors witht the upgrade ><
OK. This should work Can you try a different USB port? Failing that, is it possible to try another PC? I know about other users that had connection problems and tried a different PC and it worked OK.
Omg thank you i thought i lost it Thank you Very much i cnt thank you enough. ^^
For reference i switched the USB cable around and it worked ^^
That is great news
hey i am trying to change my rom from the pro black 3.0.1 version. but every time it gose to update the active sync connection closed down and i get a connection error. then it connects again.
Any ideas what to do ?
i'm updating to HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108
regards in advance
anyone? any ideas
Got an SD card?
get Hard-SPL v7 and install that on your PDA first,
then extract the installer, then extract the RUU_Inside file and rename the RUU_signed.nbh to HERMIMG.nbh and throw it on your memory card, then reset into the bootloader and press the power button to update
You can also try putting into bootloader mode (tri color screen) manually and then running the RUU package - manually selecting the appropriate SPL version. Be sure to select the right one though.
On that thought, be sure to do HardSPLv7 as the first upgrade - will protect the phone from getting permanently stuffed.
graztd said:
hey i am trying to change my rom from the pro black 3.0.1 version. but every time it gose to update the active sync connection closed down and i get a connection error. then it connects again.
Any ideas what to do ?
i'm updating to HTC_TyTN_WWE_3.54.255.3_6275_1.48.00.10_108
regards in advance
Click to expand...
Click to collapse
It is also possible that you have Windows Vista as OS on you're computer. Then you first have to change you're WDMC. These settings have to be done, believe me. At least if you have Vista! The procedure can be found in the Mr Vanx guide, see my signature.
Good luck
Thanx guys got it working now
an dno dont have vista but a friday of mine does an he hand that problem so thanx for the info
Glad U were able to get back on the road again!
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
gjizaqin said:
I got a friends hd2 several days ago and it was stuck on the White splash screen and wouldn't go further.
I tried Hard reset with keys and it didn't helped to get past that screen.
So i decided to flash a new ROM.
First I installed 1.42.HSPL on it to make myself safe and tried to install WWE version but failed at 9 %.
After this i tried near all the steps from another thread on the forum, the one of italian guy who tried almost everything.
Strange thing is that after trying several roms and failing all the times at 9 %, the phone once booted into windows, and i got this information from it:
Radio 2.05.51.05_2
G 15.28.50.07U
Rom 1.48.406.1 (71294) FRE
But after powering it off it didn't boot up another time.
Also there was a small damage on one of the battery pins but I think i managed to get it soldered from outside with soldering iron.
I also tried with MTTY and it didn't work either.
I got the official rom 1.48.406.1 FRE (because this phone is from swiss operator in french language) but it doesn't flash it goes to 9 % and gives error 290.
Ok, i started the thread because I actually wante to ask the question, why i'm unable to get into the Flash process from SD Card.
I formatted SD and copied the LEOIMG.nbh from official ROM and other ROM's too but when i press Reset and hold volume Down key sometimes nothing happens screen is black, sometimes im going into Bootloader with Serial shown and this text:
"Upgrade ROM code error. Please try again" and in the top right corner its written RUUNBH.
Anyone has any idea what could be problem of this device?
Btw I own LEO too and i never faced any problem till now, it was originally in German Language and i flashed it to WWE and didn't get any problems like this one.
Click to expand...
Click to collapse
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
CaponiND said:
Not sure if this is the problem, but what size is your SD card? I've heard, that sometimes is impossible to flash from larger cards, safest way is to use cards up to 2GB...
Click to expand...
Click to collapse
Actually the sd is original 2gb that comes with hd2.
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
mladen.p said:
Friend, try to flash hspl 2.08 !!
Most likely that is the problem.
Enter the bootloader and connect it via usb to your usb and install 2.08 hspl (search fo it on xda developer forum)
Before instaling it read the instruction so that you know that hspl 2.08 can be installed over the old version of hspl that you installed!!
Oh and update radio to atleast 2.07
2.14 is very good
PS
Did you perform task29 before flashing?
Click to expand...
Click to collapse
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
gjizaqin said:
I guess I should try to install 2.08 HSPL, do you think i can use the same HSPL installer and just install 2.08 hspl from it? Because i already tried 1.66.HSPL but didn't worked.
And yes i performed task29 two or three times it finishes with some known output message which is stated on the original MTTY thread to be ignored.
Any other ideas?
Click to expand...
Click to collapse
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
zengxisheng said:
you have to flash the HSPL back to 1.42 0000 ,then update the HSPL to 2.08 HSPL directly. if you flash it from 1.66. it can not work..pls be noted. good luck to you .hope you leo can be used again.
Click to expand...
Click to collapse
Ok I installed 2.08.HSPL from 1.42.HSPL and it went successfully, now i see 2.08.HSPL on bootloader but it still fails to update ROM. Stops at 8 % on the phone with rectangle mark, and on the pc it stops at 9 %.
I get Error 290 - Unknown Command
But why i cant go into sd card flash screen when i press reset and volume down ?
I just used another 2 gb microSD and added LEOIMG.nbh from official FRE ROM and it doesnt work.
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
ce3c said:
Hey bud,
I was having the same problem: the flashing didn't want to start by doing a reset+vol.down. I somehow got around this by putting the leoimg.nbh on my mircoSD card, and then started the flashing from my computer by running the .exe that contains the RUU (for ActiveSync flashing). This "magically" triggered the flashing from the mircoSD card (it showed me a screen whether i wanted to update leoimg.nbh). On this screen, pressing vol.down would start the flashing through ActiveSync, and pressing the power button would start the flashing from leoimg.nbh from your microSD card. In the last case, the update on your computer will stall at 0%, this is just because you're not running the update from your computer, but from your phone. On your computer it will time-out, but the update on your phone will continue!
I hope this works! But you're doing this on your own responsibility ;p
Click to expand...
Click to collapse
Hmmm this kinda messed me up.
What EXE file you run on the pc so it triggered update from SD ?
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
So i would say maby you just got it somehow with key kombination, because it would be impossible to run it the way you say. Or maby i'm wrong.
Could you be more specific about how you exactly run that process?
Thanks for your kind help. Gjizaqin
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
Because it's upossible to connect with activesync and browse to sd without the phone being fully operational (winmo running).
Click to expand...
Click to collapse
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
ce3c said:
Well, whatever ROM you want to flash,
when you download this ROM, the .nbh file is packed in a .exe file.
You transfer the .nbh file to your microSD (rename to leoimg.nbh), and you can run the .exe file to flash through ActiveSync.
For me it was possible: reset your phone with the volume button down, to get to the tri-color screen. It shows "serial" on it. When you then connect your phone using your USB cable, it should switch to "USB", after which you can run the ActiveSync flashing.
Click to expand...
Click to collapse
Whell, by doing this procedure your doing normal ROM Update, and it's not doing update from sd card.
Anyways i tried this way too but not successful, its stuck on 8 % and stay's that way for about 3 minutes, than it gives me error 362 on the loader.
Anyways thanks for your help mate.
Anyone with experience can give me advice what to do with this phone?
Thanks in advance.
Gjizaqin
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
whizzkid_cool said:
i'm doing task29 too... but it hang when it runs on black screen showing the percentage bar. advise is appreciated. Thanks.
Click to expand...
Click to collapse
I guess were on the same boat
gjizaqin said:
I guess were on the same boat
Click to expand...
Click to collapse
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
jordy1990 said:
This might be just a little bit off topic, but does anybody know how it is possible that some SD cards are good for flashing ROM's and other (mostly the larger) aren't?
Do you also need to copy the folder "program files" from the SD card you've flashed the ROM with to the other SD card, when you'd like to use this for your device?
Click to expand...
Click to collapse
There has been reported problems with some 16GBmSD cards when it comes to flashing from them.
The only thing you need on the mSD card is the LEOIMG.nbh file.
dwntoearth said:
Oh this sounds fun, I can no longer run active syn with my leo, the computer reports that my "usb device is not functioning properly"
I have re downloaded sync, try as I might I cant it back up and running, I wish everyone else the best of luck
Click to expand...
Click to collapse
If you boot up your phone to Bootloader mode (but not connected to the computer), the bottom of the screen reads 'Serial'. If you now plug it into the computer, does it change to 'USB'?
Your computer error message is just saying that the computer cannot install a driver to communicate properly with your phone. Since your phone isn't fully loaded into WinMo then your computer isn't going to recognise it as a WinMo device. So don't worry about that message.
feridoun said:
I have the same problem, tried all sorts with no luck. Can't get SD card install to work either.
Click to expand...
Click to collapse
I guess this problem happen to some of the flash addicts! Problem still unsolved...
Hello everyone, I just join here tonight after finding this site through google. I have been reading hours through the threads. Very interesting reading however I still could not find a solution for my problem.
I did a factory reset on my HD2 and now all that happens when I start the phone is a red, green, blue and white screen. It does not load to the windows mobile screen anymore.
On the red part of the screen it says:
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP (LED) 0X05
MicroP (TOUCH) 0X40
The green and blue stripes have no text on them but the white stripe has "serial" on it.
I am confused why this had happened, any help to fix this problem will be much appreciated. Thank you.
Hello sir, and welcome on XDA.
- Try this take out your battery
- revert beck your battery without restarting your device
- hold volume down and volume UP press in follow by a short press on the power button.
- you will see your 4color screen shortly and then a grey screen with blue text.
- Press volume up to restore your device.
Try this and let us know.
Hi Kurt Willems, thanks for the reply however this method did not resolve the problem. Still the red, green, blue and white screen appears.
greyshade11 said:
Hi Kurt Willems, thanks for the reply however this method did not resolve the problem. Still the red, green, blue and white screen appears.
Click to expand...
Click to collapse
Did it get stuck somewhere ore did you saw all the posses like I mention but after the restart you cam's automatically back into the 4 color screen?
Do you recall what your original rom was? If you plug your device into usb port on pc, does serial change to usb? If so, I suggest reinstalling your original rom.
Yes I followed your instruction exactly, still the same striped screen.
greyshade11 said:
Yes I followed your instruction exactly, still the same striped screen.
Click to expand...
Click to collapse
Well like ClydeB1 mentioned, get YOUR stock ROM, connect your device to your pc and reinstall the stock ROM (At least if your device will connect)
"Do you recall what your original rom was? If you plug your device into usb port on pc, does serial change to usb? If so, I suggest reinstalling your original rom."
Hi ClydeB1, I cannot remember exactly what the rom name was, I think it started 4... I read some threads and tried some methods such as downloading the HD2 rom from the hTc website via entering my S/N number. Then I put that on the SD card and updated it using 7-zip.. changing the file name to "leoimg...." after a minute of updating the phone reboot and said it had an error, it reboot again and completed the update. But still i am faced with the striped screens.
kurt-willems said:
Well like ClydeB1 mentioned, get YOUR stock ROM, connect your device to your pc and reinstall the stock ROM (At least if your device will connect)
Click to expand...
Click to collapse
Hi, how do I get my stock rom? When I connect the usb cable to the phone it automatically shows this striped screen on the phone. The phone does not sync with the computer. I believe the phone was set to storage card when connected to the pc. But i cannot access the storage card via the phone. I access the storage card using a multi card reader.
greyshade11 said:
"Do you recall what your original rom was? If you plug your device into usb port on pc, does serial change to usb? If so, I suggest reinstalling your original rom."
Hi ClydeB1, I cannot remember exactly what the rom name was, I think it started 4... I read some threads and tried some methods such as downloading the HD2 rom from the hTc website via entering my S/N number. Then I put that on the SD card and updated it using 7-zip.. changing the file name to "leoimg...." after a minute of updating the phone reboot and said it had an error, it reboot again and completed the update. But still i am faced with the striped screens.
Click to expand...
Click to collapse
When you download from the HTC site, you'll get an exe file. You can try to run it from your pc, connect device to pc (still in bootloader screen ie striped screen) when serial changes to usb then run the exe file.
If that doesn't work then Right click and extract the exe file to your pc. Then take the RUU_signed.nbh file, rename that to LEOIMG.nbh and copy to root of sd card (formatted to FAT32). Then flash as you described.
ClydeB1 said:
When you download from the HTC site, you'll get an exe file. You can try to run it from your pc, connect device to pc (still in bootloader screen ie striped screen) when serial changes to usb then run the exe file.
If that doesn't work then Right click and extract the exe file to your pc. Then take the RUU_signed.nbh file, rename that to LEOIMG.nbh and copy to root of sd card (formatted to FAT32). Then flash as you described.
Click to expand...
Click to collapse
I tried to connect using usb cable, when I connect it on the bootloader screen the white stripe goes from "serial" to no text just white stripe. I ran the ROM downloaded from hTc site, but when it comes up with an connectioin error.
I am running Windows 7, I could not find a Windows Mobile Sync that's compatible with Windows 7. I tried the RUU_signed.nbh file, renamed to LEOIMG.nbh and copied to root of sd card - formatted to FAT32 but at first it updates then restarts after a minute. It says there's an error, it restarts again and continues with the update and everything says "ok" but when I restart it when the update is finished, still I have the bootload screen?
greyshade11 said:
I tried to connect using usb cable, when I connect it on the bootloader screen the white stripe goes from "serial" to no text just white stripe. I ran the ROM downloaded from hTc site, but when it comes up with an connectioin error.
I am running Windows 7, I could not find a Windows Mobile Sync that's compatible with Windows 7. I tried the RUU_signed.nbh file, renamed to LEOIMG.nbh and copied to root of sd card - formatted to FAT32 but at first it updates then restarts after a minute. It says there's an error, it restarts again and continues with the update and everything says "ok" but when I restart it when the update is finished, still I have the bootload screen?
Click to expand...
Click to collapse
Try moving your usb cable to a new port, preferably one at the rear of your pc ie with direct link rather than one at the front or a hub.
The sync software for Windows 7 is Windows Mobile Device Centre, but you won't be able to make a connection if you're in bootloader mode.
ClydeB1 said:
Try moving your usb cable to a new port, preferably one at the rear of your pc ie with direct link rather than one at the front or a hub.
The sync software for Windows 7 is Windows Mobile Device Centre, but you won't be able to make a connection if you're in bootloader mode.
Click to expand...
Click to collapse
I did what you said by inserting usb cable into a different usb port. It started installing the driver "QUALCOMM CDMA TECHNOLOGIES MSM" Now on the white stripe it says "USB".
So I ran both "RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship"
AND
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
But after about 8% it turns red and says error. On the phone it says "Upgrade ROM code error Please try again" on the green stripe.
greyshade11 said:
I did what you said by inserting usb cable into a different usb port. It started installing the driver "QUALCOMM CDMA TECHNOLOGIES MSM" Now on the white stripe it says "USB".
So I ran both "RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship"
AND
"RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
But after about 8% it turns red and says error. On the phone it says "Upgrade ROM code error Please try again" on the green stripe.
Click to expand...
Click to collapse
The stock ROM you used is the one you downloaded with your S/N?
kurt-willems said:
The stock ROM you used is the one you downloaded with your S/N?
Click to expand...
Click to collapse
Yes, this is correct. When I enter my S/N number in the hTc website it gives just the one option to download "ROM UPGRADE FOR HTC HD2". This is the ROM i'm using, I am correct in assuming this is my stock ROM?
greyshade11 said:
Yes, this is correct. When I enter my S/N number in the hTc website it gives just the one option to download "ROM UPGRADE FOR HTC HD2". This is the ROM i'm using, I am correct in assuming this is my stock ROM?
Click to expand...
Click to collapse
I can't see from distance what's going wrong, but based on the fact you have/use a correct stock ROM based on your S/N and you have try both installation possibilities (over ActiveSync and over SD-card) and both failed
I'm out of Idea for the moment.
kurt-willems said:
I can't see from distance what's going wrong, but based on the fact you have/use a correct stock ROM based on your S/N and you have try both installation possibilities (over ActiveSync and over SD-card) and both failed
I'm out of Idea for the moment.
Click to expand...
Click to collapse
I appreciate the help everyone has given me so far, thanks. Still I am having no luck getting it to load up to the windows mobile screen.
I bought this phone used, It came unlocked. When It was loading properly it appeared unbraded as there were no network carrier logos on start up screen. I am not sure if this phone is factory unlocked or was locked to a carrier.
Should I try the T-mobile ROM on it? Also I have been reading the treads trying to find a solution for the past 7 hours now LOL. I had read that this phone can run WP7 and Android.
Will i be able to get the phone working on any of those OS without having to put the WM6.5 stock ROM on it? Or do I need the stock rom for this phone to work to make the other OS to work?
greyshade11 said:
I appreciate the help everyone has given me so far, thanks. Still I am having no luck getting it to load up to the windows mobile screen.
I bought this phone used, It came unlocked. When It was loading properly it appeared unbraded as there were no network carrier logos on start up screen. I am not sure if this phone is factory unlocked or was locked to a carrier.
Should I try the T-mobile ROM on it? Also I have been reading the treads trying to find a solution for the past 7 hours now LOL. I had read that this phone can run WP7 and Android.
Will i be able to get the phone working on any of those OS without having to put the WM6.5 stock ROM on it? Or do I need the stock rom for this phone to work to make the other OS to work?
Click to expand...
Click to collapse
- your stock ROM version tels a lot. your device is factory unlok. and x.xx.405.x stock ROM are English stock ROM's
- No sir, don't install a T-Mous stock ROM, it aren't the same.
- Yes you can use/install Android or even WP7 on this device.
- but first of all we need to set it working again.
Ow, I just think about one thing. When you flashed over your SD-card witch SD-card dit you used? (size)
Most recommendation are the 2GB.
8GB and bigger gives some trouble.
kurt-willems said:
Ow, I just think about one thing. When you flashed over your SD-card witch SD-card dit you used? (size)
Most recommendation are the 2GB.
8GB and bigger gives some trouble.
Click to expand...
Click to collapse
I flashed the rom using 2gb micro sd card, which came with the phone. I also tried with a 4gb sd card, still same result - stuck on bootload.
Some one please upload a TITAN II ROM
I tried the previous TITAN II ROM uploads, but it is not working,
the process stops at 16%
showing an flash write error happened please check your pda phone on the PC
I have download the ROM from this link and it is not working
http://forum.xda-developers.com/showthread.php?t=1815055
Now my phone is not booting up to the OS, it stops the boot screen
showing the details of SPL and Radio
Here are the details
P186100
SPL-1.18.2180.0(139346)
eMMC SMS 14624MB, F: PA44
9KRadio-1.02.80.13
Protocol-21.37.80.03
Radio-81.01.80.20
TOUCH A1(F:81, ID:15, V11, B:AA)
CAMERA ISP FW 0X9D
Some one PLEASE help me out of this issue, so that i can use the TITAN II
gnvkittu said:
Some one please upload a TITAN II ROM
I tried the previous TITAN II ROM uploads, but it is not working,
the process stops at 16%
showing an flash write error happened please check your pda phone on the PC
I have download the ROM from this link and it is not working
http://forum.xda-developers.com/showthread.php?t=1815055
Now my phone is not booting up to the OS, it stops the boot screen
showing the details of SPL and Radio
Here are the details
P186100
SPL-1.18.2180.0(139346)
eMMC SMS 14624MB, F: PA44
9KRadio-1.02.80.13
Protocol-21.37.80.03
Radio-81.01.80.20
TOUCH A1(F:81, ID:15, V11, B:AA)
CAMERA ISP FW 0X9D
Some one PLEASE help me out of this issue, so that i can use the TITAN II
Click to expand...
Click to collapse
Tried downloading the ROM again?
Is/was the battery charged above 53%?
Tried only having only the Titan2 plugged to your pc?
Faulty USB cable?
Tried using a GoldCard?
Tachi91 said:
Tried downloading the ROM again?
Is/was the battery charged above 53%?
Tried only having only the Titan2 plugged to your pc?
Faulty USB cable?
Tried using a GoldCard?
Click to expand...
Click to collapse
Thank you for the reply Tachi91.
I tried as you advised, but there is no result,
I have a question, Is there any GOLD CARD process.
If it is, please provide the info..
Thank you
gnvkittu said:
Thank you for the reply Tachi91.
I tried as you advised, but there is no result,
I have a question, Is there any GOLD CARD process.
If it is, please provide the info..
Thank you
Click to expand...
Click to collapse
use a goldcard to flash the stock Rom. Maybe it will work or not.
just use the goldcard tool and image that are floating around. Now as to what to rename your .nbh file is a complete guess. RADIMG.nbh, RADIIMG.nbh etc.
Tachi91 said:
use a goldcard to flash the stock Rom. Maybe it will work or not.
just use the goldcard tool and image that are floating around. Now as to what to rename your .nbh file is a complete guess. RADIMG.nbh, RADIIMG.nbh etc.
Click to expand...
Click to collapse
Hella Tachi91
Tried many times for gold card process uding Y Cable
TITAN II is not entering into USB HOST MODE
(POWER+VOL DOWN+CAMERA)
its always vibrating several times but not entering into usb mode.
Is there any solution for this??
Thank you
im bringing this thread up. i got the same problem. i have been trying to find an updated ruu but no avail.
I have the same exact problem
Lets hope some Senior Member or an Recognized Developer solve our problem to make the TITAN II live again with a good ROM.
Any Roms yet I'm having the same issue. Won't boot. Only into boot loader mode
I didn't think there were any custom ROMs for the titan II, why are you guys trying to flash the stock rom in the first place? Any issue that you had could have been resolved with a hard reset.
Lets hope at least now we would be able to receive a good rom to make our device live, pray so that some senior developer will come forward to resolve the issue.