Related
hi all, i would like to ask you for a help with my vibrant. I just purchased it and successfully made the root and unlock. I managed to do both even tho my hardware button keys does not support the recovery mode. Any holding of the buttons will not allow the phone to go to recovery mode, this is not working even with an odin. After i did the root and unlock i downloaded the rom manager, created a clockwork image and back up i tried to make the partition of my 16gb SD card using the rom manager. After this my phone restarted but after t mobile logo and galaxy s logo the phone screen stays black. Tried all thee methods to go into the recovery mode but was not able to do it. i searched this forum also but was not able to find similar case to this one. i would be very thankful for any advice.
You'll have to get T-Mo to exchange it.
http://forum.xda-developers.com/showpost.php?p=8149673&postcount=15
thanks to this instructions i was able to use odin but this did not change the satus of my phone?????
unfortunately cant i did not buy it in the store
NEVER use rom manager to partition your SD card. Try the steps in this thread
thank you, trying to do it now
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
thank you, unfotunatelly i am stuck with HW keys problem againm!!!!
i follow the steps from the post 4 from @Alkaloid and now from dead i am at froyo and will hang here for a while cause at least for a week dont want to flash nothing. Boy what a day, 12 hours fixing this samsung!!!
Ivuso, how did you get in to download mode? I tried everything from every single thread here that mentions how to get in to download mode..
Odin is the way to go..it saved me too
DJ! said:
a friend of mine bricked his phone and it boot up to the "S" screen then go black after a min. i flashed it using oden and the T959UVJFD file but i got the same results when trying to boot up again. it wasn't my phone and i had already sent the guy to get a new one, but i just started flashing it with all the vibrant oden roms i could find... non of them worked. i really didnt care any more so i was just playing around with the phone and flashed a i9000 rom, of corse it didnt work but when i flashed it back with the T959UVJFD file it worked.... i dont know if it would work out for you i just wanted to share the story... good luck
Click to expand...
Click to collapse
how did u manage to do that
You do not have to exchange it the same thing happened to me. You just need to use odin to flash the stock rom onto it. Its really easy. Youtube it
Sent from my SGH-T959 using XDA App
if you have the hardware keys lock the only way to get to download modwe is through odin. For me worked this.
start odin, fil pit and pda
remove battery
usb in the computer
hold volume buttons
put battery in - phone is showing just the battery charging status
disconnect usb and than fast connect back
now you are able to flash froyo from the the 4th post in this thread, once finished you will be in download mode but need to reboot with adb cause hardwate "enter" button will not work
GOODLUCK
Hi,
I have a samsung galaxy player 5 international version (YP-G70CW). I wanted to upgrade to Gingerbread, but my attempt failed.
I put it into download mode and started up odin, trying to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1414565
It got stuck on "Setup connection...". I now realize it was probably because I didn't shut down the kies process running in the background (which really should be included in the guides).
nyway I tried it a few times more, but then gave up and held down the power button to exit download mode. I'm now stuck in this mode only showing a "Phone ! computer" image every time I try to restart the device, and I cannot get it back into download mode. Odin recognises the device and I didn't really flash anything onto it so I would think it would still be good?
I read somewhere else that to fix it you should take out your battery and sim card for a while and try again. The Player 5 cannot easily be opened to get to the battery though, so is there another way to get out of this mode?
I've tried looking for an answer but come short. Would really appreciate some help.
Thanks
star85 said:
...
"Phone ! computer"
....
Click to expand...
Click to collapse
This is also download mode...
If you flash a gingerbread kernel( I think rj's is gingerbread only?), I do not think it will boot a froyo rom. I would suggest that you flash one of the INTL ROM's(or mine) along with rj's kernel.
Haha I feel stupid But great answer. Thank you!
Yea I was going to flash your ROM, but it said in your guide as the first step to flash that kernel first. Gonna try it now.
star85 said:
Hi,
I have a samsung galaxy player 5 international version (YP-G70CW). I wanted to upgrade to Gingerbread, but my attempt failed.
I put it into download mode and started up odin, trying to flash this kernel: http://forum.xda-developers.com/showthread.php?t=1414565
It got stuck on "Setup connection...". I now realize it was probably because I didn't shut down the kies process running in the background (which really should be included in the guides).
nyway I tried it a few times more, but then gave up and held down the power button to exit download mode. I'm now stuck in this mode only showing a "Phone ! computer" image every time I try to restart the device, and I cannot get it back into download mode. Odin recognises the device and I didn't really flash anything onto it so I would think it would still be good?
I read somewhere else that to fix it you should take out your battery and sim card for a while and try again. The Player 5 cannot easily be opened to get to the battery though, so is there another way to get out of this mode?
I've tried looking for an answer but come short. Would really appreciate some help.
Thanks
Click to expand...
Click to collapse
I'm not sure if this will help you but it helped me with my Lg Optimus E900 ... You camera button is stuck that's what's causing the problem every time you restart phone ...
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
bigallo said:
Hello everyone!
First of: I'm not sure if this is the right section, if not move.
Second of: thanks for the help you give, hope you can help me too.
I got a problem with my S3.
I was running Cyano10 Nighty (not the last one, i just update once a week) and in the last days my phone started to reboot randomly once in a while.
Today my phone start to reboot again, but it get stucked at the SG3 logo. I coudn't turn it off so i unpluged the battery. I tryed to reboot it again and nothing heppened, still stucked at the logo.
I tryed to run into CWM and then apply a recovery but I wasn't able to go into CWM. I can only make the phone run into Download mode.
I tryed to run Odin and apply some random firmware just to see if it woud work but when i plug in my S3 in donwload mode odin couldn't see it (and the whole Pc couldn't see it too).
I tryed to install kies first to get the driver, it didn't work.
I installed the S3 Toolkit and then installed the driver from here, it didn't worked.
so i'm asking: What can i do? I don't know if the phone must be functional while trying to install the drivers. Whereas i can find another S3 and finish the driver's installation, but then will Odin work?
Any suggestion is appreciate, Thanks for the help!
EDIT: I've noticed that when i put the phone on charge on screen appear a stuck battery logo, it doesn't get green and the grey spin doesn't spin.
Also in donwload mode i read this: (not sure if this can help)
Product name:
Custom binary download: No
Current binary: Samsung official
System status: Custom
Does this mean 100% no warranty?
Click to expand...
Click to collapse
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
xSpeced said:
I've seen Product name being empty before... I think it was something to do with a bad flash.
And, I'm assuming you used TA... but there's probably no warranty seeing the product name is wiped and it's "custom".
Click to expand...
Click to collapse
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
bigallo said:
What do you mean with TA?
I've flashed the CM10Nighty trought CWM, but i was using it since a long time.
The phone was correctly working and then i found it stucked on logo. No flash between the "working phase" and the "stucked on logo phase".
It was working and then stuck, but i didn't do nothing in between.
Click to expand...
Click to collapse
What happens when you try to boot into CWM?
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Mika83AC said:
What happens when you try to boot into CWM?
Click to expand...
Click to collapse
Notthing, if i hold VolumeUp+Home+Power the phone doesn't turn on, neither on logo screen
holdz said:
Looks like you may have a corrupted NAND and need a new motherboard.
Only way to know, is if you try to flash it in Odin you'll get a PIT error.
If that's the case, then they should fix it under warranty
Click to expand...
Click to collapse
I can't use Odin cause when i plugin the phone (in download mode) Odin and the whole PC can't see it. I have win8, i don't know if that's a problem for Odin or something.
Is there a way to check if i have driver/odin/any working without using the phone?
Is there a way to check if i have driver/odin/any working without using the phone?
By plugging another SGS3 in is all .
jje
Uploading....Coming soon
Hello everyone this is the official odin package for the galaxy mega ATT version. With this you can get your phone back working if you get the "This phone is not running authorized software crap. " etc . Also hope it encourages more people to find a root method without the fear of having a brick. As many of you know this package was nowhere to be found so I had to bribe a Samsung employee to give it to me which means it wasn't free for me but I'm sharing it with you guys so if you send me a beer my way i'll be happy not mandatory.
This package is in multiple parts:
I527UCUBNE7
AP: Must be flashed under PDA in Odin. This is the biggest file and contains your system,recovery and kernel partition Download
BL: This is the bootloader. If you already took the update ignore this but if you want to upgrade your phone you must flash this Download
CP: This is the modem and other network related partitions. You must flash this under Phone in odin Download
CSC: This contains carrier related settings for our firmare. Flash this under CSC in odin. Download
Highly Recommended to perform a factory reset after the flashing is completed. Let me know your results
Omg !! Super thanks bro !!!! =))))))))
So good !!!!! update successfully
Thanks again !!!
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
latinohot said:
so the guys that have tried this can confirm that is working!
and also liked to know how root is being dealt with
Click to expand...
Click to collapse
Garack has been working on it and has actually posted a file to flash in Odin I beleive. He say that if it boots up, then root should be obtainable.
Not sure anyone has tried it yet.
It is in the "root bounty for 4.4.2 update" thread
Sent from my SAMSUNG-SGH-I527 using XDA Free mobile app
im getting error last stage on system upload any advised ?
@ Sunderwear Thank you very much for the great post and instructions. I'm currently testing it out with my i527 AT&T with ODIN 3.09... will post results in a few minutes. My phone was stuck in reboot after official 4.4.2 AT&T update left it in loop mode... give me a few minuytes and I'll post my results!
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Yeah, the screen was replaced a while ago. The phone went bad once it installed the 4.4.2 official update. I will try use some other usb cable. I have plenty of microusb wires. Do you think the screen has something to do with it?
Sunderwear said:
Has your phone been repaired.. Like a broken screen recently? And if it fails with the red letters at system upload. M. Try again with a different USB cord or port. I own a cellphone repair shop and have been using the files with no problems
Click to expand...
Click to collapse
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
I haven't tried this yet...but I will back up tomorrow and report back how it goes with my unit...I still have my factory with no knox bootloader so far..and was debating if I want to even try really...
alex852 said:
Ok, I used a different port using also a brand new official/original Samsung MicroUSB cable to retest it. :crying: no work, again stuck in loop mode. Tomorrow, I will get another computer to retest this with another one. Will post the results tomorrow.
When the phone loops, I do not have any letters that appear anywhere besides the Samsung Galaxy Mega logo. it just vibrates, and then it restarts without showing any messages/letters.
You mentioned "Red letters at System Upload" is that when I hold Vol - and home? because I only get the blue letters if I do the Vol+ and home.
Thank you for your patience man. I'm sort of a noob, well, not sort of!
Click to expand...
Click to collapse
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Sunderwear said:
No worries. I was asking because the same happened to me with a customers phone..got screen replaced..then he took the 4.4.2 ota update..got stuck at samsung logo bootloop..i loaded the firmware like 4 times..re partition with pit file and erase all nand...I would get stuck in the same screen saying entering recovery..So it's an issue going around. Last resort would be sending it to Samsung
Click to expand...
Click to collapse
Yes Sunderwear that will happen because there is 3rd parties making aftermarket screens and people were buying them as replacements...If you don't have the OEM screen the driver in the firmware won't work and it will hang...I run in to something like this on a Galaxy S4 I repaired...
alex852 said:
Too close. I did all the steps, and indeed it passed all Odin steps (picture), but it's still stuck in loop mode. When I try to go into Recovery mode (Vol + and HOME), it will only show the blue letters on top of the screen (picture), then it reboots on its own... no fix do you know a possible fix for loop mode.
If I go to Odin mode (Vol - and HOME), this is what I got (picture)...
Click to expand...
Click to collapse
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
I ran it as instructed and it worked flawlessly. tHANKS [email protected]
Help!
Every time I try to use the PDA and PHONE files, it says they have an invalid md5 hash. I've tried re-downloading them, but to no avail. Could anyone help with this?
thanks.it works fine...
I did all the stepa and finally I have K.K. Just wanted to say- thank you.
USMAN_ZEESHAN said:
check your AP files size that was happen to me i download file wan;st complete than i download again and make sure file download complete
and after that use odin don;t need other file just select on PDA and let odin run after that every thing will bee fine
Click to expand...
Click to collapse
Sorry for the long delay. I think I found the full issue with the Samsung Glaxy Mega boot loop on 4.4.2
My phone is till not working. We own four 6.3 Megas (1 my wife, 1 daughter, 1 son, and mine).
Officially I have 2 that are not working properly and stuck on boot loop. My wife and daughter are working properly on 4.4.2 my son's now and mine are stuck in boot loop. Wife's phone has original screen and it's working properly, my daughter has a replacement screen I bought on ebay for about $160.00 on January. My son's I've replaced the screens about 3-5 times already (a ton of money wasted), and mine, recently I did replaced it on May (before the 4.4.2 update on June). Here goes the issue:
My son's phone updated today about 2 hours ago while we were visiting the AT&T store for U-Verse Quote. Did not know it updated until we got home... Sons' phone is stuck in boot loop also now!!!!!!!!!!!! What I did was I took my daughters phone apart (with expensive replacement screen and currently running 4.4.2), and installed the screen on my sons and then mine, and each phone would work flawlessly with that screen, so I took the current replacement screens I had from my phone and my son to install them on my daughter's and each one would go into boot loop.
After that, I re installed the good screen on my daughters back, and daughters work properly again. I guess the generic OEM screens from eBay I've been buying for $50 bucks are not compatible with 4.4.2 Kitkat, they are only compatible with 4.2.2 Jelly bean.
Anyone knows where I can buy original screens? I've contacted several sellers on eBay to see if the screens work on 4.4.2 because I don't want to spend more money on screens. I just got 1 from China 2 days ago, and that one also gets stuck in boot loop... so frustrated with screens. All my OT from work goes to pay for these issues... Help anyone? Anyone sells working 4.4.2 compatible screens?
Also, I will buy a broken ORIGINAL screens from ebay (like $7-$10) to test it out and verify. I will post results. Hope this experiment (and my sadness) will help you guys out if stuck in boot loop.
P.S. Oh yeah, I did do both phones on PDA, then all BL,PDA, etc... and I still get boot looped. I have to say THANK YOU to the original autheor because it does work! It's just my screens that doesn't work!!!!! HELP GUYS!!!!!:crying:
Is there a certian order u need to flash these in?
Any short tutorials..
Ive flashed odin pda only b4..
Have to factory reset first?
Thanks guys.
Hello everyone.
A few months ago my Korean Samsung Note 1 (SHV-E160S) bricked while updating an application. I left the phone as it updated an application over wifi. When I came back the screen was black. I pulled the battery and after that the phone would not fully boot. It would go into download and recovery mode only.
I have flashed (using Odin) the original firmware downloaded from various different websites. Every time however the loading bar would get to around 80-90% and would fail. When I power the phone up after the fail it would show a yellow triangle with Korean text stating that the upgrade was not completed and please connect to Kies. No access to download or recovery. I have tried restoring through Kies but Kies does not recognize the phone.
I have tried flashing all the different versions of original firmware(for SHV-E160S) I could find(as I do not know the version of the firmware that was on the phone before it bricked). I have also tried 4 different computers, 3 different USB cables, many different USB ports and multiple versions of Odin. Always fail.
I have even tried a suggestion to flash using the PIT file after flashing the PDA file. When I do that the Samsung screen comes up with the blue loading bar but the loading sometimes gets stuck or the phone reboots. But I do have access to download and recovery when using the PIT file.
This phone has caused me much stress. I am at the point I should just buy a new phone as I have already spent many hours trying to revive this phone.
Please if someone has any other suggestions I would appreciate it very much.
Hope this helps
kafeero said:
Hello everyone.
A few months ago my Korean Samsung Note 1 (SHV-E160S) bricked while updating an application. I left the phone as it updated an application over wifi. When I came back the screen was black. I pulled the battery and after that the phone would not fully boot. It would go into download and recovery mode only.
I have flashed (using Odin) the original firmware downloaded from various different websites. Every time however the loading bar would get to around 80-90% and would fail. When I power the phone up after the fail it would show a yellow triangle with Korean text stating that the upgrade was not completed and please connect to Kies. No access to download or recovery. I have tried restoring through Kies but Kies does not recognize the phone.
I have tried flashing all the different versions of original firmware(for SHV-E160S) I could find(as I do not know the version of the firmware that was on the phone before it bricked). I have also tried 4 different computers, 3 different USB cables, many different USB ports and multiple versions of Odin. Always fail.
I have even tried a suggestion to flash using the PIT file after flashing the PDA file. When I do that the Samsung screen comes up with the blue loading bar but the loading sometimes gets stuck or the phone reboots. But I do have access to download and recovery when using the PIT file.
This phone has caused me much stress. I am at the point I should just buy a new phone as I have already spent many hours trying to revive this phone.
Please if someone has any other suggestions I would appreciate it very much.
Click to expand...
Click to collapse
You have to use quincyatt roms for you phone, im guessing you have a sgh-i717 att,tmobile,Rogers,Fido, or Telus ?
never use a korean rom on these phones because there for our phones. I've tried this rom and it didnt work so I had to pull out the battery and go to recovery mode and flash it to my rom I used before.
As for trying to flash your phone back to stock, if odin isnt working, use the flashable zip and flash it through twrp or cwm.
Hope this helps
- Cheers
Actually as stated in my post I am using the Korean Note SHV-E160s.
I am downloading a custom rom called SayanogenMod and also CWM and will see what happens.
kafeero said:
Actually as stated in my post I am using the Korean Note SHV-E160s.
I am downloading a custom rom called SayanogenMod and also CWM and will see what happens.
Click to expand...
Click to collapse
Ohh sorry....
Try getting the Sgh- i717, I herd they're problems with that phone.
TeamAndroid14 said:
Ohh sorry....
Try getting the Sgh- i717, I herd they're problems with that phone.
Click to expand...
Click to collapse
No problem. I'm actually thinking of getting a Galaxsy S5 soon if I can't fix the note.
So the Sayanogen did not work. CWM does the same thing that Odin does. It gets to like 90% and then the screen just goes black and stays that way until I pull the battery. Then after reboot the phone freezes on blue bar loading screen...
This is so frustrating....
kafeero said:
No problem. I'm actually thinking of getting a Galaxsy S5 soon if I can't fix the note.
So the Sayanogen did not work. CWM does the same thing that Odin does. It gets to like 90% and then the screen just goes black and stays that way until I pull the battery. Then after reboot the phone freezes on blue bar loading screen...
This is so frustrating....
Click to expand...
Click to collapse
Thats kinda weired, I've always run into problems with my note and I've always use odin and it works perfecly.
try downloading this rom, im guessing its the custom rom for your phone http://forum.xda-developers.com/galaxy-note-att/general/rom-galaxy-note-korean-shv-e160k-s-t2873791 , flash it with odin and make sure you use the latest versions of odin. see if that would work
Hope it helps :good:
TeamAndroid14 said:
Thats kinda weired, I've always run into problems with my note and I've always use odin and it works perfecly.
try downloading this rom, im guessing its the custom rom for your phone http://forum.xda-developers.com/galaxy-note-att/general/rom-galaxy-note-korean-shv-e160k-s-t2873791 , flash it with odin and make sure you use the latest versions of odin. see if that would work
Hope it helps :good:
Click to expand...
Click to collapse
I am currently downloading the files and am going to try that rom. Will update when finished. Thanks.
So I have at this point also downloaded multiple custom roms and none have worked. I have at this point started looking for another phone.
kafeero said:
So I have at this point also downloaded multiple custom roms and none have worked. I have at this point started looking for another phone.
Click to expand...
Click to collapse
Oh snap that sucks, the same thing happened to me and I got it fixed by using odin.
Some times it can be the usb port. If you do want another Samsung note 1, you can try buying it off ebay, really cheap.