Hi guys
I've experienced a weird bug lately.
When I turn on my X10 it recognizes my SIM card and I'm able to call, send text, use 3g among all other stuff.
But in some point of use it just stops detecting the sim card and i have to reboot the phone again. it's getting me mad because i can't figure out what is going on
About the phone:
Root
2.1-update1
Kernel 2.6.29
FW 2.1.a.0.435
Baseband 2.1.54
Im not using any task0killers, just watchdog lite
Plz help, I don't know what to do anymore
The fact you aren't running a custom ROM would point to a hardware/SIM card related problem... get hold of your service provider and send it back for replacement, as a test shake your phone around and see if you can replicate the problem, this would confirm a hardward issue...
The issue kinda disappeared now but im afraid it start happening again.
I tried shaking it many times and nothing happened, not even a sound of something moving inside.
Could it be just a problem with the signal?
Sent from my X10i using XDA App
Hey guys, my x10mini will reboot sometimes and sometimes not when receiving calls. And sometime it just shut down itself. After that whenever I turn on the phone it will also reboot after the lockscreen appear. Any pros can help me with this problem please. Appreciate it. Thanks
Maybe u had the cpu speed too high. Try setting it to 122/691
Sent from my X10mini using XDA Premium App
i had the same problem when i set cpu speed too high, and i couldn't do anything, it constantly rebooted, so i booted into xrec and wiped dalvik cache, and it solved the problem
But I never tweek the phone before. The phone is running stock rom. Out of the box.
Flash a new rom
gwsa said:
Hey guys, my x10mini will reboot sometimes and sometimes not when receiving calls. And sometime it just shut down itself. After that whenever I turn on the phone it will also reboot after the lockscreen appear. Any pros can help me with this problem please. Appreciate it. Thanks
Click to expand...
Click to collapse
Sent from my U20i using XDA App
I'm sorry to hear about your reboot problem.
You could check if you get the same problem using another SIM card in the phone. If you only experience reboots when receiving calls maybe it could have something to do with the SIM card.
If not you can try to reinstall the phone software using Update Service. Found here: www dot sonyericsson dot com /updateservice
BR
Johan
Sony Ericsson
My SGS2 stopped vibrating. Tried flashing, un-rooting, restoring stock and factory settings. None of these worked.
I am inclined to think that it is a hardware problem.
Has anyone else been dealing with issue? I read some posts on XDA regarding this matter but they were software related as opposed to hardware. Can anyone post instructions on how to fix it or provide any solutions for this issue?
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
UpInTheAir said:
If its hardware, why not flash stock, remove binary flash count with USB jig, and return for warranty?
Sent from my GT-I9100 using xda
premium
Click to expand...
Click to collapse
Cannot get jig in Palestine. Bought the phone from the UK. Sending it back will be problematic. I will look for a repair shop.
Thanks for the quick reply
That's a "bummer" (bad luck). You could make a jig, but as you said that it would be problematic to return. Hope you can sort it easily. Sorry, can't think of anything of use right now.
Sent from my GT-I9100 using xda premium
hey there,
i got the same problem. no more vibrating at all. not with calls or notifications and not as haptic feedback. it started today (was still working in the morning), though i did not drop the phone or anything.
i am still hoping too find that it's a sw-problem. but all potential solutions i find do not help. so i guess i have to contact samsung.
but before i do that i have to get rid of all "hacking".
could you plz tell me what i have to do?
i have now cm9 20120402 nightly.
but i still have a cwm-recovery-backup of the original touchwiz (gingerbread).
-so first i make a backup of my current rom via cwm and of all my apps via titanium and store everything on my pc.
-i flash my touchwiz-backup
-i get one of those: http://www.amazon.de/s/ref=nb_sb_no...ld-keywords=Samsung+Galaxy+S2+USB+Jig&x=0&y=0 , plug it in, wait til its done and remove it again.
after that, samsung will never know i "messed" with the phone??
or do i have to consider/do something else?
tyvm!!
kws
I have the same issue.
When I was on my stock 2.3.5, I found a workaround:
- go into test mode (dial *#0*#)
- find the vibrate button, when you press it, it shouldn't work like you expect
- go back
- plug in your headphones and push the cable a bit to the left
- test vibrate again - this time it should work
- pull the cable out while vibrating, still pushed to the left, vibrations should stay on
I know it sounds crazy but it seems the hardware part that controls the vibrations is near to the jack port - excessive use of headphones, like it was case, must have damaged it somehow.
However, now I'm on CM9, so no test mode for me, I'm achieving the same effect by bashing the back button, so I get semi-constant vibration. I know, It's ridiculous.
Have the same problem here, I think it's software related because the shut down vibration stopped working when I flashed CM9 ICS, I can't remember if it was working anywhere else though. But now I'm back to 2.3.5 and it's not working at all. Did a Factory Reset, Cleaned Cache before and after the flash. Also used the Jig to reset my counter. Any clues?
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
dajomas said:
I am experiencing the same issue.
Yesterday, I downgraded from 4.0.3 back to 2.3.5 as I was having a lot of problems with ICS. Now, my phone works fine again except for the fact that it does not vibrate anymore. (Which it did fine in 4.0.3 and before in 2.3.5)
I tried the trick Lechium06 mentioned in this thread but that did not work for me.
Anyone else having this issue? More important, anyone have a solution???
Greetinx
Johan
Click to expand...
Click to collapse
I saw something similar on CM9 thread, they said it could be a "bad flash", not a corrupted rom but the lack of proper cleanup before and after the flash. But I cleaned up everything before and after and I don't like reconfiguring the whole phone again for nothing.
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
kweso said:
since i had that before, i ruled out a hardware issue. it happend when i played with the system settings. but as i sayed, i tried to reverse everything i did. now after i updated to 0206 and wiped cache and dalvik, still no vibration.
is there anything i could have missed?
is there a possibility to reset all settings to default without deleting all my data?
thx,
kws...
...tapatalking
Click to expand...
Click to collapse
I assume since your posting in xda developers that you are rooted?
If so, just back up data with titanium backup app and factory reset, setup system and then restore USER apps and data only.
Sent from my GT-I9300 using xda premium
kweso said:
it happend again.
dont recall what i did or if i did something last time at all. but it worked for over a year now. and now, my sgs2 doesnt vibrate at all, i tried all possible settings, tested with z-device and rebooted. nothing.
apprechiate any hint!
thx!!
kws
Click to expand...
Click to collapse
Did you install another rom?
My vibration for example didn't work with some cm10.1 nightlies
it started in cm10.1 20130203. then i tried wipe cache and dalvik. nothing. then i updated to 0206 (wiped cache and dalvik again) > still nothing. went to bed. got up. everything ok! its vibration again! i am 100% sure, it did not work, when i left it on my desk last night. this morning, i checked for missed calls and it took a moment until i realized: i got haptik feedback back on patternunlock and keystrokes! checked ringtone-vibration: fine as well!
dont ask me how! would still like to know for myself.
thx,
kws
AW: [Q] Vibrate function doesn't work anymore, hardware issue
call me stupid!
suddenly this evening my phone stopped vibrating again. then i realized: quiet hours! i turned off haptik feedback at night.
could slap myself. at least ill find this thread again, next time i screw it again....
nite,
kws...
...tapatalking
Girls can use it again then. Good news for them!
Sent from the little guy
I was trying to make calls yesterday and no matter who I called they couldn't hear me at all as if the microphone was broke. But the strange thing was, if I used S Voice it worked no problem and Skype did aswell.
This is why I cant understand what was going on.
I tried restoring from a backup but still didn't work. Did a full wipe and re installed a Rom from scratch.
Everything did work before I backed up and was working then suddenly stopped. I dint know what triggered it. Didn't install or do anything strange to it
Sent from my GT-I9300 using xda premium
You are not the only one. I tried several ROMS, all but one (checkrom v3.) did not work. Also only lbf modem is working for me. I tried to complain on several threads all devs do not recognise this as a pb.
Sent from my GT-I9300 using xda premium
I have this problem as well, I get it fixed by flashing a different modem everytime it brakes. Rather annoying issue. Atm running cm9 and lef radio. Hope this gets solved sometime soon.
Hello, recently i have changed the touchscreen of this x10i. The new one works correctly, but when the phone is locked, the touchscreen stops working, and only works after removing the battery. What can it be? Can it be a software issue? Im using stock android 2.3.3, clean install..
Can it be a driver related issue? I guess the phone receives the signal to turn off the touch, but it doesnt receive it to turn on. I would take a log, but im a noob a it. If anyone could help me.. Cheers
Anyone?
Sent from my Galaxy Nexus using xda app-developers app