Related
OK. I had Bionix 1.5 installed today and wanted to try to install a new stuff. Give things a try... no biggie. I completed a few backups and installs today but during one of my attempts I received an error in recovery about cant find update.zip. I rebooted the phone cause there was no other options at this point. Well, it booted back into the rom and started tossing "force close" after "force close". I went home and cranked up odin and flashed the T959UVJFD.tar file. Everything looked great but I noticed the "tmobile stick together" animation did its thing and when the Galaxy S animation popped up, it then played the sound that usually would play with the tmobile animation. looks like its gonna boot but screen goes black after galaxy s animation and just sits there. If i touch the buttons at the bottom of the phone they light up.... but thats it. Am I screwed? Any help is greatly appreciated.
Update* I notice when I flash a odin image and it goes there its process and restarts my phone into recovery, it fails when trying to wipe data.
Wrong section? I'm sure.
Sent from my SGH-T959 using XDA App
?? Not sure. I'll gladly move this to another area if thats the case. I just figured since it was a rom issue and maybe someones seen this issue before. just looking for direction.
cmosvirii said:
OK. I had Bionix 1.5 installed today and wanted to try to install a new stuff. Give things a try... no biggie. I completed a few backups and installs today but during one of my attempts I received an error in recovery about cant find update.zip. I rebooted the phone cause there was no other options at this point. Well, it booted back into the rom and started tossing "force close" after "force close". I went home and cranked up odin and flashed the T959UVJFD.tar file. Everything looked great but I noticed the "tmobile stick together" animation did its thing and when the Galaxy S animation popped up, it then played the sound that usually would play with the tmobile animation. looks like its gonna boot but screen goes black after galaxy s animation and just sits there. If i touch the buttons at the bottom of the phone they light up.... but thats it. Am I screwed? Any help is greatly appreciated.
Click to expand...
Click to collapse
you are not completely screwed yet. This just happened to me this past weekend when i tried to install new lock screen. Just hook your phone up to a pc with the samsung drivers install and working ADB. From there you can just type in adb devices to see if the pc sees your phone. If it does, you are in good shape. You can proceed with adb reboot download or recovery which ever you want. The worst case is when you do adb devices and nothing shows up. You can then start slapping yourself on the forehead because you are screwed unless you can get into download or recovery with the volume keys.
I can def get into recover OR download mode. Just doesnt matter when i'm there. A fresh Odin image doesnt correct this BLACK SCREEN OF DEATH im experiencing once the galaxy s boot animation goes away.
cmosvirii said:
OK. I had Bionix 1.5 installed today and wanted to try to install a new stuff. Give things a try... no biggie. I completed a few backups and installs today but during one of my attempts I received an error in recovery about cant find update.zip. I rebooted the phone cause there was no other options at this point. Well, it booted back into the rom and started tossing "force close" after "force close". I went home and cranked up odin and flashed the T959UVJFD.tar file. Everything looked great but I noticed the "tmobile stick together" animation did its thing and when the Galaxy S animation popped up, it then played the sound that usually would play with the tmobile animation. looks like its gonna boot but screen goes black after galaxy s animation and just sits there. If i touch the buttons at the bottom of the phone they light up.... but thats it. Am I screwed? Any help is greatly appreciated.
Update* I notice when I flash a odin image and it goes there its process and restarts my phone into recovery, it fails when trying to wipe data.
Click to expand...
Click to collapse
Did you by chance use the Bionix 1.5 release with the Voodoo Kernel? If so, did you forget to disable voodoo before flashing JFD? I've done this before (cuz apparently I have bouts of stupid a lot).
If so be sure to check the "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out." section of the OP post in the Bionix thread.
You forgot to disable voodoo before you flashed over to the stock firmware . Simply flash eugene's froyo that does not brick via odin (follow the instructions on his thread) and then you can flash the stock firmware.
Right on guys! Next time i'll pay a little more attention. Will give this a try. I'll update with status.
OMFG ppl dont read **** mann.....read all disclaimers and everything else including directions a couple times b4 u flash anything....we need an anti-noob thread creating block mann
solarpanel said:
You forgot to disable voodoo before you flashed over to the stock firmware . Simply flash eugene's froyo that does not brick via odin (follow the instructions on his thread) and then you can flash the stock firmware.
Click to expand...
Click to collapse
masterotaku said:
Did you by chance use the Bionix 1.5 release with the Voodoo Kernel? If so, did you forget to disable voodoo before flashing JFD? I've done this before (cuz apparently I have bouts of stupid a lot).
If so be sure to check the "Did You Flash Something Before Disabling Voodoo? 2 Fixes to Help You Out." section of the OP post in the Bionix thread.
Click to expand...
Click to collapse
boimarc89 said:
OMFG ppl dont read **** mann.....read all disclaimers and everything else including directions a couple times b4 u flash anything....we need an anti-noob thread creating block mann
Click to expand...
Click to collapse
You're right I should have caught that. Thanks to those who were cool about it. Worked out.
After installing a ROM and rebooting the phone everything seemed to work fine. The only problem is that it I can not install any programs because it thinks that I have no space available.
Now I did not backup my system... I do have an older backup on my laptop... but I can not install clockwork because there is no space.
please help!
Thanks in Advance!
it might be a problem with the ROM.
ODIN back to stock, then flash that same rom again, if its still there, contact the DEV and tell him, because its their fault.
If it gets fixed with re-flash something went wrong while flashing and that happened.
What ROM did you install? Was it ODEX or DEODEX?
I agree with the above post, if an ODIN doesn't solve the problem, it sounds like a problem with the rom, but a little more info on your situation wouldn't hurt.
Thanks for the input... I hope to resolve this before tomorrow! The ROM was Bionix Fusion
I am new to this and probably should have researched a little more. lol
Ok I have downloaded the ODIN3 v1.00
How do I ODIN back to stock?
I have the Samsung Vibrant,
Having the same issue when running Odin with Eugene_2E_JK2_Froyo ...I ran Odin to fix a brick and didn't know the history of the phone. This is the only tar that will boot the phone all the way up, but I get the 0.00 available space error too. I tried stock and almost get a full boot up, but then goes black before going to main screen... I've tried many different combos including T959UVJFD.tar + s1_odin_20100512 pit , 512 pit + T959UVJI6, T959JL5, etc...
suggestions?
The ROM itself seems nice... I like the changes I've seen. For some reason it does not recognize the space that is available on the SD card as space for Applications. I've read a post somewhere about repartitioning the SD card in ODIN. ROM manager is s pretty much useless without clockwork recovery installed.... can not install it without space available. I tried repartitioning in ODIN but would not do it... is this something that could work? Maybe I am doing something else wrong,... or any other suggestions?
At this point I will be happy to go back to factory settings then start over...
Jayson Simmons said:
The ROM itself seems nice... I like the changes I've seen. For some reason it does not recognize the space that is available on the SD card as space for Applications. I've read a post somewhere about repartitioning the SD card in ODIN. ROM manager is s pretty much useless without clockwork recovery installed.... can not install it without space available. I tried repartitioning in ODIN but would not do it... is this something that could work? Maybe I am doing something else wrong,... or any other suggestions?
At this point I will be happy to go back to factory settings then start over...
Click to expand...
Click to collapse
I agree... This thread would probably get more attention in the development section, but I may be wrong. I will keep trying things and let you know if I come up with something...
Actually now I am having the same problem... Went back to the original using ODIN now when the phone boots up it goes to a blank screen and will not go any further!
Jayson Simmons said:
Actually now I am having the same problem... Went back to the original using ODIN now when the phone boots up it goes to a blank screen and will not go any further!
Click to expand...
Click to collapse
What files did u use to odin back
Sent from my SGH-T959 using XDA App
s1_odin_20100512.pit
T959UVJFD
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Jayson Simmons said:
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Click to expand...
Click to collapse
Thanks for posting your resolution in the event this happens to someone else down the line. Glad you got it up and running.
Yup that is the true stock firmware... try this, it might help and it might not? when you boot your phone and it loads up, format your internal and external sdcard. (back up first) then reboot.... see if that helps. if not, odin the stock rom again. right now i'm shooting at flies with a BB gun so it is worth a try anyway...... and i'll try and research it for ya......
oops i didnt know you found a way....my bad. glad you got it working!!!!
So is that the way to fix it then? I just want to know if anyone else has tried it with no problem before i do it. Also, will you be able to flash back to stock?
I flashed the files that were included with the ODIN package and i now don't have any memory for applications also is the only way to fix this issue by using ODIN again or has someone found another method?
Did you use OCLF at any time previously?
Sdobron said:
Did you use OCLF at any time previously?
Click to expand...
Click to collapse
I tried voodoo for the first time and couldn't get past the vibrant screen i then used the odin package the tmobile default files and got to the tmobil boot screen but the screen goes black and nothing happens my hard ware keys were on but that's it so then i used eugenes package based off the tmobile leak and that's where i'm at now it works but no application memory available.
so i want to see if i can just use ODIN with the file that is up a couple of posts to get my app memory back
How much available app space are we suppose to have?
So I know the phone has 2GB of app space, but when I totally wipe everything and go back to stock, it says only about 1.7GB.
go to settings, then sd card and phone storage
scroll all the way down to application storage
how much available space is it suppose to have under stock conditions?
Jayson Simmons said:
Okay... YAY!!! I got it working! Here's how!
I want to note that every time I would Flash the phone with ODIN when the phone would reboot it would fail to wipe the data! This was not a fix that I found on purpose but it did work for me:
I flashed the file EUGENE373_SamsungS_Froyo_PDA
Now that file is for the Vibrant i9000. Not mine
So after that I re-tried the original one that I stated above,.... then it worked! I did notice that it did NOT fail to wipe the data!
So relieved!
Click to expand...
Click to collapse
Can you post the EUGENE373_SamsungS_Froyo_PDA file? I flashed Eugene_2E_JK2 Froyo, and then tried flashing the original JFD Stock Rom, but it gave me a black screen after the Galaxy S screen. Also, it didn't wipe the data for me.
has anyone fixed this? i have the same problem im stuck
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
dude that's not even close to a brick as the phone is still responsive somehow..
do this:
1. pull out battery wait 5-10secs
2. connect USB to computer and phone
3. hold down the vol +/- buttons
4. plug in battery
5. you should be in download mode now
6. do what you gotta do with ODIN
good luck
Dont use that method to get to DL mode . Do it this way . First turn off your phone , then plug the usb cable into your computer ONLY . Next hold both volume buttons and plug the micro usb into your phone . Also use odin v1.3 and flash the rom of your preference .
Edit : xtone beat me to the punch
trill12 said:
I partitioned my SD card using ROM Manager, turned the phone off and got a black screen with lit keys. So, I read around and was told to use ODIN to reflash the stock TMO build, so I did. Now, Im getting the TMO logo and Galaxy S screen, but I get a black screen still.
I cannot get into download mode. I vol - and power and I get the Vibrant logo, then it goes back off. Even when plugged it, I get the batt charging animation, then back to the Vibrant screen.
I tried to push the update.zip to the SD card through ADB, but I get a permission denied message, meaning the root was killed.
So, is this phone pretty much screwed? I cant think of any other way to get it going outside of moving the update.zip to the sd card by a 3rd party measure i.e card reader/another phone
Click to expand...
Click to collapse
Yes using ROM Manager to repartition your phone will create the "soft-brick" you are experiencing. But as one person has already noted, this can pretty much be recovered using ODIN.
Definitely follow the advice given in Posts 2 and 3 of this thread to get into Download mode. If you're not getting the desired results using ODIN, what settings are you using? For example, what are the names of the .pit and .tar files you are using? Did you check or leave unchecked the "re-partition" option?
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
trill12 said:
Sorry for the noobery. Im usually good at this.
Well, I was able to get into download mode and get ODIN to run, but im getting a MBD checksum error when I boot into recovery.
And I cannot install CWM through the market because my Application Storage is at 0.00B for some reason.
Click to expand...
Click to collapse
What ROM did you flash. You might want to perform a factory reset and then flash the stock JFD ROM and see if that fixes your problem.
Good luck.
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
blizzard1017 said:
Oh this is a nightmare.... exactly what happened to me.
I'll be honest, I tried and tried and tried all sorts of stuff and somehow I got it back reading again.
I would ODIN to Eugenes Froyo that doesn't brick and see where that gets you. Thread is in developers section and I am pretty sure that's what got me back working but follow ALL the instructions. With no application room I couldn't push, unistall, install ect...
Click to expand...
Click to collapse
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Just get to DL mode as xtone and I stated in post 2 & 3 . Then flashed to JFD with odin v1.3 and click the repartition box in odin and you'll be fine .
Sent from my SGH-T959 using XDA App
I had this problem for the last two days, but I found a way to fix it thanks to a user (whom I don't know the name of)
I did this to go back to stock firmware (JFD), make sure you have that downloaded.
Look for Eugene's Galaxy S Froyo PDA, for the i9000, not the Vibrant. Flash it through Odin with the 512 pit file. It's not going to boot up but take you to recovery mode instead, and it's going to remap your Volume buttons, but you can still get into DL mode (up is now down, and vice versa but whatever)
Now Odin back to stock, using the same 512 pit and there you go! Should boot up with no problem. Now you can redo everything, but remember to never partition through ROM Manager ever again!
Sent from my SGH-T959 using XDA App
Is there a link you could provide him?
AgentFour20 said:
That's only needed if he flashed a rom with the wrong kernel or if he flashed a rom without disabling voodoo .
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
His exact symptoms happened to me when the noob in me decided to repartition in Rom Manager awhile back. I am just suggesting he uses this tool as an option. It's definitely a good tool to use regardless of how he got where he got.
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Mr.Duck said:
something like this happened to a buddy of mine, i'm trying to fix it, but the guy was completely stock so it makes no sense... I've tried everything, and i cant seem to find eugenes files...
Click to expand...
Click to collapse
Eugenes rom are on his new site www.eb-production.proboards.com
Sent from my SGH-T959 using XDA App
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
trill12 said:
OK, I got it fixed. Heres how.
I was finally able to get into ODIN and flash Eugenes Froyo.
So, from there, I was getting an MD5 checksum error when Id try to get into recovery, and I couldnt install the ROM Manager from the Market
Well, upon inspection of a the Nero V3 build I had downloaded, there was a ROMManager.apk there. So I pushed it onto my phone, reflashed to CWR (had to do it about 3 times) and reinstalled Nero V3.
After installing the build, I was able to re-enable voodoo and its theres no more MD5 craziness when I access the Recovery
Click to expand...
Click to collapse
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
AgentFour20 said:
So voodoo was the culprit . lmao
I dont remember you ever mentioning that . Any way glad you figured it out and have your phone back .
Click to expand...
Click to collapse
Apparently. Completely forgot I attempted to enable it. I was freaked all the way out trying to repair the damn thing.
Ok, I was restoring my phone to stock with odin following these stpes
Disable Voodoo
Odin to eugenes froyo that wont brick
sticks at vibrant screen
tried odining to JFD
odin completes but still hangs at the vibrant screen
I have tried with and with out repartition checked and I am able to enter and exit download mode freely, I have tried 3 differnt versions of odin and 2 different downloads of the pda and pits. Any help would be great.
EDIT, Odin is finishing at the pass stage when the phone attempts to boot Currently flashing the JI6 seeing if it works.
Still not getting anywhere, I have now tried to odin to eugenes froyo, JFD, JI6, all which end the same with out a boot screen, I can get download but no recovery.
From my understanding when you flash eugenes froyo that wont brick the boot animation should change to the international one, mine has not done that so I am starting to wonder if there is an issue with the flashes themself.
How long did you wait after flashing the stock firmware? The first boot usually takes a while after an Odin. Did Odin finish flashing everything to the point that it said restart in blue?
You can find instructions to revert to stock http://forum.xda-developers.com/showthread.php?t=734475
I've gotten myself out of some pretty bad "bricks" with JFD and ODIN... make sure you also use the stock .pit file and you can check repartition, use JFD and should fix you right up.
I have waited for 10-15 minutes after it says restart and then sometimes after it says pass, and I have done to jfd and stock pit.
left phone at boot fell asleep woke up hr or so later still at vibrant screen, still cannot access recovery but can access download mode.
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
iynfynity said:
To OP. What custom rom did you run before flashing back to stock? Have you recovered?
Click to expand...
Click to collapse
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
ionic7 said:
I was on axura the newest one and did not like it that much tbh had tons of processes starting nonstop and was constantly down to 35m of memory while idle. No I have not recoverd, I have flashed every combo I can think of with ODIN but alas have had no luck.
Currently it is being warrantied out for a free replacement.
Click to expand...
Click to collapse
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
iynfynity said:
To OP.
have you tried flashing eugenes froyo that doesn't brick? I can't understand why a lot of these bricks are happening right now. Especially when you do flash your phone back to stock.
Click to expand...
Click to collapse
Yes read the first post it says what i have flashed.
Charlie Brown said:
orage
So tired.... I am in the same boat. But I get to flash Eugenes froyo but i have 0 room in app storage. Then When I try to Odin to stock JFD and stock .pit it all goes well untill I get to recovery and it tells me in red text "data wipe failed"
The phone reboots and goes black after the galaxy s animation.
You think samsung will fix it for me? I go the phone in July 2010.
Click to expand...
Click to collapse
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
ionic7 said:
How would I know if samsung will fix it.. I called tmobile said it got bricked while doing JI6 boom problem solved. Their support is not that great though he was having me try to access root by calling it a secert master menu, then asked if i tethered my comp to it but his definition of tether was syncing files I was just playing dumb and letting him ask me his questions
Click to expand...
Click to collapse
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
ionic7 said:
Yes read the first post it says what i have flashed.
Click to expand...
Click to collapse
try that again.
Sent from my SGH-T959 using XDA App
Im having the same issue with, "Data Wipe Failed" and have 0.00 space in Application storage but my phone reboots into eugenes 2.2 perfectly fine and works, but the application storage seems to be empty still...very frustrating.
cvibe88 said:
Rooting your device and flashing custom roms onto it voids your warranty from t-mobile. You are wasting your time trying to see if they will help, This is NOT in their job description. They might laugh at you.
@OP Try flashing to a TRUE stock firmware, I personally would not flash from a custom rom to another custom rom, does that make sense? You should go back to t-mobiles legit 2.1. There is a link in the Bible here under the Dev forum. But, The link is broken. So Ive uploaded it here http://www.mediafire.com/?8kw71bx06an0vwg
Don't give up on odin yet, try things like changing your usb ports on the computer, this has worked for me. I also have a video tutorial using odin, it might be of some help to you. http://forum.xda-developers.com/showpost.php?p=10207377&postcount=1
Good luck!
Click to expand...
Click to collapse
have changed usb cord, port, computer, have flashed jfd ji6 froyo that wont brick, 512 pit,513 pit,and they have not laughed at me in anyway they are sending my new phone now and a g2 to try out soo either way I have something soon. I also was going from axura to stock to a custom rom not from one to the other and I do know how to use odin, I know what I am doing just need help figuring this one out has to be something im missing or its just not gonna work. 50 odins and nothing kinda says it all.
I am in the same boat.. tried ODIN + stock ROM from various sources, nothing seems to work.. am I out of luck ??
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick