I have been trying to root and install a new rom on this aria. I've read several posts surrounding ODIN, SuperOneClick, Rom Manager and CyanogenMod. Here's as far as I've gotten so far.
1) I seem to have gotten into a problem plugging in the usb while plugged into the computer. Whenever I plug the phone in (while connected to the pc) the phone always jumps into cwm. I can't even pug it in to just charge it. Yes this happens with either power on or off.
2) A suggestion given to me was to use ROM Manager to load CyanogenMod. I had always flashed through odin or cwm. I did view some articles on YT and saw this could be done. I tried it, cool thing is, it allowed devik and cashe clearing. All looked super exciting until Cyanogen man kept skateboarding 'round and 'round (boot loop). I nandroided back and here I am
FYI the phone is still running v2.1 update
tomween1 said:
I have been trying to root and install a new rom on this aria. I've read several posts surrounding ODIN, SuperOneClick, Rom Manager and CyanogenMod. Here's as far as I've gotten so far.
1) I seem to have gotten into a problem plugging in the usb while plugged into the computer. Whenever I plug the phone in (while connected to the pc) the phone always jumps into cwm. I can't even pug it in to just charge it. Yes this happens with either power on or off.
2) A suggestion given to me was to use ROM Manager to load CyanogenMod. I had always flashed through odin or cwm. I did view some articles on YT and saw this could be done. I tried it, cool thing is, it allowed devik and cashe clearing. All looked super exciting until Cyanogen man kept skateboarding 'round and 'round (boot loop). I nandroided back and here I am
FYI the phone is still running v2.1 update
Click to expand...
Click to collapse
When you use ClockworkMod to flash a new ROM, you need to make sure that the USB cable is not connected when you boot into ClockworkMod. The correct procedure is to power off your phone, disconnect the USB cable and then hold the Volume Down key and press the Power button until you see the white HBOOT screen. Then on the HBOOT screen select the RECOVERY option using the Volume Up/Down keys and then press the Power button. The phone will then boot into CWM.
^^^Thank you tpbklake, I have finally fixed all but the cwm instant on, when plugged in
Related
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
Hi!
First off, I've done about 6 hours of searching and other troubleshooting. I couldn't find really any thread on the the problem my Vibrant has. I apologize if there is a thread, and I couldn't find it.
Extra info: I had a Vibrant last summer and I rooted it and installed quite a few custom roms. I wouldn't consider myself a noob, but I'm definitely not close to an expert.
I have a Samsung Vibrant. It was running Android 2.2 and 3e recovery. I wanted to install an ICS rom, so I rooted it. I then install Clockworkmod recovery. I flashed CM7(Android 2.3), and that's when it started having problems.
It syncs perfectly, I can transfer files between SD cards and everything. The problem is, it doesn't charge. The battery icon has the lightning bolt on it, but it doesn't charge.
The other issue is that it won't go into download mode. I believe I've tried all the available button combinations. I also installed ADB(and the appropriate drivers) and did the "reboot download" command. It rebooted, but didn't go into recovery mode. I also tried that command on the phone, in the terminal app. Same result.
I've tried 5 different USB cables.
The problem seems to have started after I rooted it and flashed CM7.
I have two batteries, but over the course of troubleshooting, both have died.
Oddly enough, I plugged it into my mom's Atrix 4G charger and it started charging? That's charger number 6!
This might get you download:
Pull battery. Some people think you need to pull sim and sdcard. I didn't need to.
Plug phone to host.
Fire up Odin on host.
Insert battery. If no luck, pull battery and reinsert while trying the three permutations of volume keys.
Once in Odin, reflash bootloader.
If still problems, Odin to stock.
try holding the home button + up/down, different combinations of that works to get into download after cm7 and up.
For what it's worth just holding volume up (no power button) while the phone was powered down and then plugging in a USB cable hooked to my PC always worked for me to get into download mode.
But whenever I've gone up to any of the Ginger or ICS ROMs I flash the Gingerbread bootloader in Odin first and then the ROM.
If you've got time, keep troubleshooting (espically if one cable worked... weird), but I say save yourself a headache and get all your goodies off, Odin back to stock, format the internal and external SDs, and then try again loading the GB bootloader first.
Thanks for the suggestions guys
Using the new cable, I was able to flash back to stock with Odin. Even back on stock 2.2, it still won't charge off any other cable. Oh well. I really don't mind using an Attix USB cable.
Sent from my SGH-T959 using Tapatalk 2
It sounds as though you're dealing with a hardware issue and the malfunction simply happened at the same time as your recent upgrade. Possibly one of the USB pin connections is flaky.
Hello,
I'm rooting/installing a custom rom on a friends phone. I'm on 2.3.5, .418. I successfully rooted using the self-extracting method. I've been trying to flash CWM/bootstrap to no avail. I was wondering if anyone had any ideas on what to do?
I've tried droid2bootstrap v1.0.5 and This .apk method. Neither seem to work. When I tell the phone to boot into recovery via the application is just reboots normally, if I select booting into recovery via vol- + pwr once I select android recovery it goes into a screen similar to that of cwm recovery, but there are no options and I have to perform a battery pull to reboot the phone.
Any help/ideas would be fantastic.
Thanks!
I'm special
bdpope88 said:
Hello,
I'm rooting/installing a custom rom on a friends phone. I'm on 2.3.5, .418. I successfully rooted using the self-extracting method. I've been trying to flash CWM/bootstrap to no avail. I was wondering if anyone had any ideas on what to do?
I've tried droid2bootstrap v1.0.5 and This .apk method. Neither seem to work. When I tell the phone to boot into recovery via the application is just reboots normally, if I select booting into recovery via vol- + pwr once I select android recovery it goes into a screen similar to that of cwm recovery, but there are no options and I have to perform a battery pull to reboot the phone.
Any help/ideas would be fantastic.
Thanks!
Click to expand...
Click to collapse
Well, found out what the issue was. The .apk method linked above asked that you plug in your phone to an AC outlet. I thought this was to ensure that your battery is high enough. With the battery at 100%, I ignored the warning. Going over the issue one last time, I tried plugging in the phone and it worked like a charm.
I'll leave this up just in case someone in the future is as special as I am.
bdpope88 said:
Well, found out what the issue was. The .apk method linked above asked that you plug in your phone to an AC outlet. I thought this was a, to ensure that your battery is high enough. With the battery at 100%, I ignored the warning. Going over the issue one last time, I tried plugging in the phone and it worked like a charm.
I'll leave this up just in case someone in the future is as special as I am.
Click to expand...
Click to collapse
LOL. Well done sir.
Alright guys. I hardly post on here because I know many questions have been answered. I searched and was unlucky.
I had my phone rooted last year, but went completely back to stock because I was tired of the battery drain. Recently, maybe a month or 2 ago? I updated to 4.0.4. That's when my power button stopped working. All of a sudden, about a week after, it started working again. So I was happy. A week ago, it stopped again. Using my phone everyday, it got really frustrating. I was dumb and didn't search for a fix, which I later found a temporary fix.
So I decided to root again. Well, when I plug my phone into my laptop, it tells me "USB device not recognized" so I looked for a way to root using mobile. Found a few videos on YouTube with links with an .apk and did it that way. I had CWM backed up in Titanium Backup, so I restored it and opened it. I wanted to flash a ROM on my phone, but I didn't think before I went into CWM. Stupid, I know lol.
Now I'm stuck in CWM, without a working power button. I tried taking the battery out, and putting it back in. It still boots into CWM. I tried taking the battery out, plugging in my phone, and putting the battery back in, and still CWM. I've also tried taking the battery out and leaving it out for a while then putting it back in. And also, taking the battery out and leaving it out for a while, plugging in my phone, then putting the battery back in. Still in CWM. I've also tried hitting the Home button (does nothing). Nothing happens when I hit the Search or Back buttons either. I hit the Menu button, and it hides the menu, then I hit it again and the menu comes back.
Luckily, I'm due for an upgrade next month so recently I've been using my super old "Krzr" flip phone. I miss having a Smartphone though!
Any help would be appreciated!! Please don't flame me lol
118 views, any suggestions??
Why don't you try repairing the power key. I strongly believe It may be a hardware problem
Sent from my SGH-I777 using xda premium
If you have USB debugging enabled you could connect through ADB and force a standard restart.
If that's not an option and you can't get out of recovery (Had a very similar issue with my wife's phone when her power button went) you can use an odin 1 click downloader to revert it to stock and it will then restart normally. I then used the odin 1 click downloader to install a rooted stock rom. After that I took a touch enabled kernel (like Siyah) and installed that through Android Terminal emulator. Now you can boot into CWM and be able to use the touch screen to navigate. It's a pain and it requires a full wife and reversion to stock but it does work. Then you flash a rom that allows for holding the volume down to wake the screen or a kernel like AJK that allows for swiping across the screen to wake the phone.
I'm sure your power button failed so as the previous poster suggested you can look into getting it repaired. I don't have the link on me but there was a place listed here on the forums before that were like $40 to do the hardware replacement.
duttysrez said:
Why don't you try repairing the power key. I strongly believe It may be a hardware problem
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
KeiranSolaris said:
If you have USB debugging enabled you could connect through ADB and force a standard restart.
If that's not an option and you can't get out of recovery (Had a very similar issue with my wife's phone when her power button went) you can use an odin 1 click downloader to revert it to stock and it will then restart normally. I then used the odin 1 click downloader to install a rooted stock rom. After that I took a touch enabled kernel (like Siyah) and installed that through Android Terminal emulator. Now you can boot into CWM and be able to use the touch screen to navigate. It's a pain and it requires a full wife and reversion to stock but it does work. Then you flash a rom that allows for holding the volume down to wake the screen or a kernel like AJK that allows for swiping across the screen to wake the phone.
I'm sure your power button failed so as the previous poster suggested you can look into getting it repaired. I don't have the link on me but there was a place listed here on the forums before that were like $40 to do the hardware replacement.
Click to expand...
Click to collapse
Thanks for the info. Late last night I pressed the power button while "reboot" was highlighted in CWM and it finally worked. But it only worked that once, at least it got me out of CWM. My phone reboots a LOT. At one point, it rebooted at least 3 times in a row; getting to the AT&T screen and rebooting then.
I've decided to just deal with it lol I'm probably going to see if AT&T can kindly let me upgrade this week instead of waiting until June 1st.
Again, I appreciate the info!!
Do a clean flash
Ok since you are saying your phone's power button started being flaky after a ROM flash, I'm thinking most likely it is not a hardware issue.
Bad flashes, loading different bootloaders, or kernel flashes and then panics happen for various reasons.
You need a clean flash, reset to factory (erase data/cache multiple times) and reboot.
Back up first (like right now), then gather your operation tools.
1-Download I777 usb drivers from Samsung itself, uninstall the current ones, and install the new drivers (Do this plz)
2-Download the stock ROM from [INDEX]AT&T I777 GSll {Root/ROM's/Tools} thread by t3chn0s1s in AT&T Samsung Galaxy S II Android Development (http://forum.xda-developers.com/showthread.php?t=1301682)
3-from that thread get: A) Odin B) UCLE5 ROM
4-Run Odin and try connecting your phone to see if it stays in the Download mode successfully (phone off, Odin loaded on your PC, plug in your phone to your PC while holding down both volume keys, release the keys once your COM connection port lights up) sometime holding down the volume down only button works instead of both depending on what you flashed before.
5-load up the stock .tar UCLE5 file in the PDA section, leave all the Odin default check marks on and add the flash bootloaders check mark too(DO NOT check the repartition option)
6- once a clean flash finally happened (doesn't matter if the phones boots up all the way or not yet) pull the battery, and get to recovery and reset / factory reset and let the newly flashed ROM boot up
7-let it settle for 10-15 minutes and then reboot it.
Good luck,
I727-CM10.1
How the problem occurred
So a year or two ago I bought a Jiayu G4A/T/Whatever they're calling it and safely got it here. I've used the stock ROM for a bit but I wanted to get rid of the bloatware that was still on it, so I eventually ended up with a properly rooted phone with a ROM from Jiayu.es (Everything worked, have ClockworkMod as recovery, accessible via Mobileuncle Tools), which was essentially a stock Kitkat rom made to work for the phone. Now I got sick of the ROM and recently saw the new EMUI version on Huawei's P8 Lite, so I figured I'd look around for a tailored ROM running that, and ended up at "jiayu-emui-3-0-stable" from Needrom.
What I did
1. I downloaded a ROM from Needrom with identifier "jiayu-emui-3-0-stable" (I can't post external links)
2. Backed up my important files following a guide from androidcentral titled "[Guide] How to Backup and Restore Apps and Data when installing new ROMs" that I can't link,and did a full backup using CWM
3. Placed the ZIP on my internal SD card, went into recovery, wiped data/cache (not dalvik, since it wasn't described in the instructions, I think this might be a probable cause) and installed the new ROM from ZIP
4. Rebooted the phone and now it's stuck in the boot loop I mentioned.
What the problem is
Bootloops aren't that much of a problem usually, except this one is... I can't get into recovery mode. From there on it'd be cake, since I made the right preparations, but I can't get into it. While connected to my PC it keeps powering on, showing a splash screen from Jiayu.es briefly (which shouldn't be present anymore) and powering off after 10 seconds, only to come back to the splash screen.
What I've tried
I've unplugged it, removed the battery, waited to get a full power cycle and tried to hold my buttons in these combinations: [power button + volume up], [power button + volume down] - but neither work. It just keeps going with the boot loop. I can succesfully power it down, and when I plug it in from there it shows the low battery image. At the moment of seeing that I thought I could connect to it using ADB / Fastboot, but no luck there either. It keeps saying no devices found, and with fastboot it keeps on <waiting for device>.
My questions
What exactly can I do if there is no way for me to get into recovery mode? Are there any alternatives? How can I get my device to be recognized by ADB? Is that even possible? Why is this bootloop any different from others?
Update from the massive Q&A thread:
ZipAddict said:
Is it booting up on its own too after being off? This happened to wifes phone and it turned out the power button was stuck. I took a pencil and hit the power button with the eraser a few times and it worked then. Her case mustve dislogded it. I will keep my fingers crossed for u. If not send me a private message and i will look for an answer tomorrow and get back with u
Click to expand...
Click to collapse
Thank you for the reply!
Yes, it does. I took the battery out and let it lay disassembled for a night, after which I cleaned it a little and re-inserted the battery. With the case back on, nothing happened, so the power button wasn't stuck for sure. When I powered it back on with the power button (no USB attached) it showed the emblem for ~8 seconds and powered off. It then buzzes to show it's powered on again and up comes the splash screen again. Could it be that the ROM was just a rebooting falsehood? Why would it disallow me getting into recovery mode? I really hope there is something that can still force the device into recovery mode / interact with it somehow while in this state.
Oh, I also tried to see if the volume down button was broken but all the contacts seem intact, plus, they worked an hour before I started switching roms.