i now am using vegan, and i configured eveything many times on the g tab and it will not connect to my router. i restarted, downloaded the rom again, went back to tnt(it worked) then back to vegan and does not work.
i had tnt and it worked perfectly with my wifi, i have my mac address in my router. using wep, but i have tried open, even reconfigured my router.
it shows obtaining forever almost- then sez disconnected.
if i configure staticly it will show the antenna at the top, but still wont browse the net.
ive read similiar threads but no answers yet????
new-to-it said:
i now am using vegan, and i configured eveything many times on the g tab and it will not connect to my router. i restarted, downloaded the rom again, went back to tnt(it worked) then back to vegan and does not work.
i had tnt and it worked perfectly with my wifi, i have my mac address in my router. using wep, but i have tried open, even reconfigured my router.
it shows obtaining forever almost- then sez disconnected.
if i configure staticly it will show the antenna at the top, but still wont browse the net.
ive read similiar threads but no answers yet????
Click to expand...
Click to collapse
Just a suggestion?
I think the issue may be with WEP. Try using a different wireless security format instead of WEP, try WPA2 Personal or something other than WEP.
EG: I have my router security set to only allow certain mac addresses (as you did). I have it broadcasting on a channel that is not used by default (Ch6 - 9).
because other people around me don't care about that that makes for a lot of extra noise making it difficult for the router to diiferentiat between signals it can hear. Security set to WEP2Personal and I have network mode set to N only.
My GTAB connects almost instantly everytime coming out of sleep or upon boot up.
I have had problems conencting to WEP networks with Vegan as well. My wife who used TnT Lite doesn't have any problems with WEP. I use WPA at home and it works fine. WEP is pretty low security anyway (any more it's like being open), if you can you should be using WPA or WPA2. Also, make sure your router is configured for the MAC address of your tablet and that Vegan didn't change the MAC address to something you haven't configured your router for.
i just tried wpa and wpa2 personal etc. and it worked, but now my vista compu doesnt want to connect to wpa. so i cannot do it.
my router is a netgear with modem in one. i think it was a freebee that comcasst kicked in years ago. the firmware is specific comcast, so not all the settings are available.
but i tried and tried to get all my wireless working, and no go.
so vegan cannot be used with wep??? true or false?
if so ill go back to tnt i guess.....???
though i did feel vegan was a tiny bit faster...
It is a good thing that you couldn't use WEP.
WEP is as easy to break into as a high school gym locker and should be avoided at all costs. You might as well leave the connection open if you are not using some verison of WPA.
That being said, I had no problems connecting to a local WEP wi-fi network with VEGAn.
Suggestion:
Dole out some extra fins and get a new router..
I can only guess wep doesn't play well with the gtab.
i am still interested if anyone has wep with vegan?
im saving for a router now.
any suggestions on a comcast cable router modem in one.??
My suggestion is to use the wpa. Your vista computer can connect to it, you probably just need to work on the configuration.
it might be a bit of a hassle, but once you get everything going on wpa everything should run smooth....
So, i'm at a hotel in Branson. They have wifi with wep. Out of the 4 wifi enabled devices I brought, only the gtab is not connecting. It should also be noted that I never have trouble connecting the gtab to wpa networks.
Just thought everone might wanna know.
Related
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Is you SSID hidden?
I have found that on some routers, Android phones in general won't connect if the SSID is hidden.
clarkee013 said:
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Click to expand...
Click to collapse
The WRT54GS should be a perfect router to use.
Make sure you are running latest dd-wrt firmware on it, setup wifi security as : WPA2 Personal Mixed, TKIP+AES
I have these settings and phone connects easily.
Its a good router, do as above poster advised and definitely get latest firmware on. Try going on just G mode if there's no B-only old wifi gadgets in your house.
Sent from my U20i using XDA App
I noticed my wife's X10 mini won't connect to Channels 12 and 13. If your router is on one of those channels, try moving it to 11.
I have difficulties connecting to my wifi router at home, SMC Barricade N2, WPA2 authentication, it works only after resetting the router.
Now after turning off TKIP cypher suite (only AES), it works perfectly
update: and also helped to enable static IP... but I am using wifi only @home
Had the same problem. Changed to Channels 11 and detected imediatly my wifi network.
Hi, I have a different problem with the wifi.
At work and some other connections I've seen to have an open wifi, which i can freely connect.
However, I am still unable to browse the internet as it requires some browser authentication.
I've seen other fones (Nokia and Iphone) have their browsers popup a webpage to input the credentials.
but my mini pro doesn't display this page.
i've already tried going directly to the login url manually but still doesn't display the login page.
someone told me that this might be a limitation of android but haven't seen any reports about it...
i also saw and tried 2 apps (Open Wifi Login and Browser Wifi Login) that should have solved this but did not.
Has anyone else had this experience?
Help please....
shameless self-bump
other fones seem to have the same issue but no solution...
http://forum.xda-developers.com/showthread.php?t=622326
help please
I have recently returned to my apartment with my brand new archos 70. I use WPA2-PSK encryption for my wifi network. at first everything was golden, I could browse the web and whatnot just fine. as of a few days ago, wifi has not been working correctly. my device connects to the network (pulls an ip address from the router) but when I try to browse web pages or open web based apps they hang up and act as if I have no connection. it works fine on other networks (to limit the problem to my network) I have tried doing a factory reset of the device, tried power cycling my router and modem with no luck. I have also changed encryption types to no avail. i have the latest firmware for the gen 8 series. also from time to time during this session of events, sometimes it will connect to the router, then disconnect and reconnect. I have no clue whats going on because I havent changed any router settings since I got back. the only other devices on my wifi network are two laptops. any help would be appreciated.
you mean you restored to the factory settings ran through the start up all over again and it still won't connect to your router? have you tried any other types of connections or routers?
I had this problem just the other night was this close to reformatting the whole thing. but I solve the problem by turning the device off, then holding the reset button while it rebooted to turn it off again, an reinitializing the drivers.
how do you reinitialize the drivers? I did a factory wipe. and it connects, it shows as having network connectivity (even my router lists it as a dhcp client and currently making use of the access point) but no internet functions work. ive connected to other networks fine.
This happened to me when I first got my A70. What I had to do to fix it (after getting incredibly pissed, reformatting twice, and almost returning the thing) was to set it up to use a static IP address on my home wifi network. Don't know if it'll solve your problem, but it works beautifully for me and I'm able to enjoy the device now.
Just remember to uncheck "use static IP address" when you get on other wifi networks.
well, I set up static addressing, gave it a private ip, set up the gateway and dns, and it still wont connect to anything.
If set as wireless N, set as N+G or G only, latest firmware may have trouble connecting to wireless N networks.
na, I dont have it set to n, I have it set to auto which I believe puts it to g with my archos. thing is, it used to work. now it suddenly has problems.
Im beginning to wonder if the archos tablets are just picky about wireless routers. I wouldnt think so...
Upgrade the firmware
Archos published a firmware upgrade to solve this problem (December 2010). The related bug in the release notes is...
Wi-Fi: fix Wi-Fi stuck after a while when using WPA2/AES encryption mode
The new firmware download link is in the Archos website.
you can download the firmware to your computer, copy it to the root directory of the tablet using the USB cable, and run the upgrade process in the tablet.
... or you can use another WiFi network (without WPA2/AES) and download the update in the same tablet
Note: I cannot send the links, however you can use the information to search the links in the internet.
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Hello there,
did you ever solve your wifi problem, I am currently running the latest TnTlite, and this just started happening to me as well. It just hangs in Obtaining Ip then it disconnects.... I have never had this problem before in fact was online on the tab last night, now it seems i cannot connect... I will see if I can connect in another location hope nothing happened to the Tab..... BTW I tried restarting as what was suggested but that did nothing for me also....
Are you broadcasting your SSID?
Can you take the tablet somewhere else and try connecting at a Star Bucks, or a library, or something. See if it connects ok there?
Also, if it doesn't connect anywhere. Try flashing a different ROM to see if it is just that one.
I've had the same problem. I do not seem to be able to connect to any wifi that is encrypted with WPA. At work, we are WPA and I cannot connect at all. At home, I have WEP and can connect. I thought it might be something with the wifi settings on the tab, and have searched and searched and cannot find anthing.
By the way, this is my third tab and none of them could connect to a WPA encrypted router. The first two I returned as defective. IF there is an answer, I would love to hear about it.
Also, this is my first android device. I have been messing with Windows phones for a long time...thanks to the great people on this site.
Sorry to hear about your wifi problems. Just to let you know my experiences, I've (in the week I've owned my tablet) run TnT, VegaN and cyanogen (latest of each) and have never had a problem connecting to my home wifi - I do not broadcast my SSID at all and use WPA2/PSK encryption. You both mention WPA - can either of you try WPA2/PSK?
But on saying all of that, if you can't even connect to your wifi point without any security involved, it sounds either:
1) Hardware - faulty tablet but you said you're on your third so that sounds unlikely. Remember, while the tablet supports wifi G/N it does so over 2.4Ghz so if you have a router that only does 5Ghz or is set to work exclusively over 5Ghz, your router will not see your tablet
2) Software related - Have you reflashed your kernel at all? Did you possibly install a kernel (not rom) that does not have wifi drivers installed or something similar?
I hope something above might help you....
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
bevbeng said:
I was never able to connect to the wireless router. I shut all the security off, reset the router, rebooted the tablet but still the same results, "obtaining IP address" then it fails and tries again. I could connect to my neighbors Linksys so I know the tablet wifi is ok. I also so know that the router was ok since it had been serving my other PCs & printers for a number of years. It just wouldn't connect to each other.
The problem still persists.
+++++++++++++++++
Running TNT Lite 4.2.1
Click to expand...
Click to collapse
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
1. if your tablet can connect to your neighbor's router, then problem lies between your router and the tablet.
2. is your router a linksys? what wireless router are you trying to use?
3. are you using mac address filtering? is dchp enabled on the router or by some sort of home server?
4. your tablet can see your router, but for some reaon they cant agree on how to talk to each other. i'm on a linksys wrt54gsv4 and havent had a problem, not with default settings or wpa2 or mac filtering or the custom firmware i eventually installed on it (ddwrt), tomato)
Sent from my GTablet-TnT-Lite using Tapatalk
bevbeng said:
Hi just received my GTablet and have installed ClockworkMod v08. Next, I am attempting to install the TNT Lite Rom but I am having trouble connecting to my home router.
The response I keep getting when trying to connect is to the point of "Obtaining IP address.." then it disconnects. I am sure it's not the wireless router but just to be eliminate possibilities, I've even switched off all the security with connect to the router, but the sames results. It keeps trying to re-connect. I can easily connect with my other PCs and printers.
Any ideas? Thanks in advance.
Click to expand...
Click to collapse
You are ATTEMPTING to install TnT ROM? You dont need the Internet connection, just sideload it then install. Am i Right?
Then after you install the TnT rom, sideload also the Kernel TnT base with wifi fix.
http://forum.xda-developers.com/showthread.php?t=895825
Hope this will solve your problem.
Good luck
powercrazy said:
You didn't answer in your response above, is your router a 5Ghz router or 2.4Ghz? Could the frequency of your router be causing your problem here? Remember the tab only supports 2.4Ghz frequencies
Click to expand...
Click to collapse
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Since the original posting I have got TNT Lite installed (using my neighbors router)
bevbeng said:
I have an older Microsoft 2.4Ghz B/G wireless Router. I'll try to sideload the Kernel TNT base with the WiFi fix.
Thanks for the tips.
Let us know if it solve. If not, I think you have defective unit.
Goodluck!
Click to expand...
Click to collapse
Something else occurs to me out of pure ignorance. I'm not sure how Android stores profile information. But I know with both mac and windows I've had occasion where "forgetting" the network and letting the device rediscover it has solved problems.
It sounds like you've been down that road already. However, it does bear asking. It's the more obvious things we often forget to consider.
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
RyuFDAC01 said:
Well it looked like the tablet needed to be reset a couple of times as i was just online with it... now the tab just froze, shut off and now i cannot turn it on... off to another thread to see what to do now... god i hope this thing is not bricked....any suggestions on what is a good thread would be appreciated... off i go.......
edit: found a thread now to find the internal reset button. thanks to all at xda....
Click to expand...
Click to collapse
Try to hold the power button for a long time and maybe it may turn back on. Before doing your last resort (disecting the tablet).
I had a problem with my wifi going into loops when I first got the unit. It would show it connecting/disconnecting/connecting/etc as described in the first post.
I had another router (both the same makes - Linksys WRT54G but different model numbers) so I tested the other router and I connected fine. I haven't gone back to test the first router yet and I am using the 2nd one.
The router I couldn't connect to has DD-WRT micro on it, and I haven't had problems connecting other wireless devices to. The one that is working fine with the g-tablet now has Tomato on it (it is a lower version number which supported Tomato).
Too bizarre... I now have this problem.
I received my gtablet today and installed clockwork mod recovery and vegan-tab ginger RC 1. Or, essentially, I followed the instructions here and got everything working. http://forum.xda-developers.com/showthread.php?t=865245
Wifi worked fine until the evening. Wifi is on, and in the settings under the SSID of my wifi network, it says Obtaining IP address for a minute until it says Disabled, network in range. I've done some common trouble shooting, like restarting, turning wifi off and on, forgetting the network and reentering password. That didn't work. My cell phone has a mobile hotspot feature and the gtablet CAN join that. I wonder what gives... I hope someone can help.
(This could be just coincidence, but it's about when I powered up my desktop computer. The desktop connects to the internet through a DMZ router that has a wired connection to the wifi router in another room. The desktop is now off and the gtablet still has this problem.)
Ok. Resetting my router fixed it. I never thought that my router could just "dislike" one particular device. I thought for sure something had to be wrong with the device. Forgive my ignorance!
G Tablet Wifi
I do not transmit my SSID and this has never been a problem with any of our laptops or netbooks. When I first received my G Tab and tried to connect to my network, even though I had entered the SSID and Passphrase correctly, it still would not connect. As soon as I set my wireless router to transmit the SSID the G Tab connected without any problems.
This is the first time I've encountered a problem of this nature. Comments?
This is what worked for me. I posted this in a similar thread as well.
Hey, I had WiFi connection issues too. I just got a Viewsonic G-Tablet with the Android 3.0 OS and have a D-Link DI-524 wireless router. It could see router and would try to connect, but would cycle and never connect. I could try to connect to other available networks in the area. It connected fine to an unsecure network, and when I tired to connect to secure networks there was a place where I could enter a network key/password. However, I noticed this option was not available on my network when I tried to connect. I reset my router which did not help. I then chose the option to add a network on the tab. This worked!! I was able to enter the key from the add a network option. I then told the "bad" connection to be forgotten. Hope this helps someone else, as I had looked on the internet for awhile for an answer. I was about to buy a new wireless router too!! Oh, I am using WEP too.
edit: ok when I power my tablet back on the same issue was happening. This time I could enter a network and the cycling still contiuned. I even forgot and re-entered the network. The fix this time was to reboot the tab. However, my internet has been acting up lately so IDK.
So it seems that there is no way to connect to a non broadcasting wifi network in any of the current froyo roms. Anyone got any ideas on how to resolve this?
I have tried hidden wifi enabler and even added it separately, but it just says out of range when its sitting right next to the wireless router. With broadcasting on it connects with no problems.
tnerb123 said:
So it seems that there is no way to connect to a non broadcasting wifi network in any of the current froyo roms. Anyone got any ideas on how to resolve this?
I have tried hidden wifi enabler and even added it separately, but it just says out of range when its sitting right next to the wireless router. With broadcasting on it connects with no problems.
Click to expand...
Click to collapse
I've done it in Vegan... what encryption are you using? I know there are issues with WEP...
using wpa2 I heard rumors that tkip doesnt work with it. This correct?
I got mine to connect running stock and TNT 4.4 but it wasn't easy. I intially went into wifi setting and "add a network" typed in the SSID (not being broadcast) and password (WPA2/TKIP) and it would find the network but not connect. I did some searches and found various suggestion but none worked.
After a lot of failed attempts I got frustrated and turned off wifi on the tablet and then turned it back and suddenly it connected with no problems. It may have been a one off thing but couldn't hurt to try it.
nik
Ill give this a try and see what happens. But I am not getting my hopes up.
Just out of curiosity.....
What's the point of connecting to non-broadcasting router?
It's like turning on WiFi in the middle of desert?
JMO.....
turn on ssid bdcst. connect then turn bdcst off.
Tester30 said:
Just out of curiosity.....
What's the point of connecting to non-broadcasting router?
It's like turning on WiFi in the middle of desert?
JMO.....
Click to expand...
Click to collapse
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
My Stock 3588 connects fine
I have a non broadcasting router in my home and stock 3588 on my gtab. Did the connection once when I bought the tab and it has been connecting just fine for couple months now!
LGCubana said:
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
Click to expand...
Click to collapse
So not even close to true
Using a non-broadcast SSID as a security measure is probably the weakest (well...next to no encryption at all) method available.
LGCubana said:
If your wireless router doesn't broadcast it's SSID, others can not attempt to access it.
Click to expand...
Click to collapse
Using a Linux PC, I can see ALL available wireless APs with this command:
Code:
iwlist wlan0 scan
Hiding the SSID is not even considered to be a security option, it is that poor. Save yourself some trouble and let it broadcast the SSID.