I‘ve got an Atrix 4G a few days ago. but have a serious problem now.
i have bought the unlock code and the code was accepted.
after i insert an GSM card,the signal status bar shows a big forbidden sign just like "NO PARKING".it works like a MP4 right now,cannot make any calls.
i have changed for more than 5 GSM cards.but still no signal.
anyone who knows what should i do now? thanks!
Have you tried manually searching for an operator and logging into its network under mobile network settings? (you can switch back to automatic afterwards).
There could be a frequency mismatch, but on the one hand this bad by is quadband gsm and triband 3g, and on the other hand that woul dbe something you checked before you bought.. right?
Where do you live?
I have a similar problem. My reception goes on and off a lot and sometimes a reboot works, sometimes it doesn't. I have real bad reception at places where my old phone (an x10mini) had very good reception. The wierd thing is that when I have reception it's 4-5 bars, and then it drops to 0, I live in Sweden and have Tele2 as my carrier.
Qatar - Same issue
Hi all,
I'm having the same issue with my phone... no radio signal at all. My friend has an HTC android phone that has the same hardware antenna wise and band frequencies as the Atrix and his works fine... and my friend has an Atrix here unlocked and it works too...
Any thoughts?
I'm having the same problem... It worked yesterday when i unlocked... Since today, It can't find my carrier network... I hope it's not broken!!!
i had the same probleme weeks ago i reset all and i stay always in automatic research
tonton_fred said:
i had the same probleme weeks ago i reset all and i stay always in automatic research
Click to expand...
Click to collapse
I performed a Hard Reset... Still no lucky...
I searched for Networks. Then I tried that carrier's SIM, and it worked...
Wonder why mine isn't working on edge nor gsm as yesterday...
Just figured out that my phone is not working with edge, gsm... only with 3G...
The phone is Quadband... So... Wasn't it supposed to work with all frequencies??
Related
Wondering if you can help me.
In my office my colleuge and I have an hd2 on UK o2 pay monthly. Untill about a month a go we were getting HSPDA internet access. Now we are only getting EDGE. I contacted o2 and they stated that the area is a very high coverage area and we should be getting HSPDA.
What makes matters more interesting is two other colleuges in my department in the same building, one has an iphone 3 and the other has an iphone 4, both guys are on uk 02 pay monthly and are getting full 3g access. I am getting 3g and hspda in other areas.
Does anybody know why we are getting edge instead of at least 3g?
thanks.
I had a very simillar issue, so perhaps the solution I found will work for you. A co-worker of mine bought an HD2 (immediately after seeing mine). In many areas at work the reception was terrible. I also noticed that at home, when I first had the phone I got 3G often, but after a few weeks I was suddenly stuck on the EDGE network (If I got any reception at all). Since messing around with the Android port I was forced to flash a new Radio ROM and it seems that was my problem all along. At home I now get constant full bars HSPDA. At work I get reception in places that I never did before. My coworker (still using stock radio) is having the same reception issues I used to have.
So my advice is try a few different radios and see if that helps.
Faelok said:
I had a very simillar issue, so perhaps the solution I found will work for you. A co-worker of mine bought an HD2 (immediately after seeing mine). In many areas at work the reception was terrible. I also noticed that at home, when I first had the phone I got 3G often, but after a few weeks I was suddenly stuck on the EDGE network (If I got any reception at all). Since messing around with the Android port I was forced to flash a new Radio ROM and it seems that was my problem all along. At home I now get constant full bars HSPDA. At work I get reception in places that I never did before. My coworker (still using stock radio) is having the same reception issues I used to have.
So my advice is try a few different radios and see if that helps.
Click to expand...
Click to collapse
Yea we did try that the other night thinking it might be a radio issue we went from 2.5 up to 2.12. What rom / radio did you use if you dont mind me asking?
Does anybody else have any ideas? This is happening with two ok uk hd2's in the office! My colleuge and I have tried multiple rom and radio upgrades but nothing is working but my other colleuge on iphone can get 3g sitting beside me
ive had this issue too, never knew how to fix it :/
AGHHHHHHHHHHHH Going to call o2 tomorrow and tell them I want to swap for a new phone, I am not getting the service I should be!!!
Ive tried just about everything I can think of. Ive tried updating the ROM, Radio, rilphone.dll - also tried going back to stock rom, yet my colleuge sits on his iphone right beside me on 3g its madness!
have you tryed puting your phone into flight mode then .ack on again let thephone pick the strongest hsdpa mast signal up. welcome to tbd way o2 works lol we get it all the time in york and leeds
That is a very interesting idea. I will try and report back thanks man!
I am really getting no ware with this. Phoned O2 and they tested phone in my network said that I should be ok I should have full hspda access, my colleuge is sitting on iphone with ull 3g and has a o2 dongle which has hspda access. I am getting fulll signal strength, changed the sim card and tried multiple radio and dll file combos and this is driving me nuts. Any help would be appreciated.
I have been doing some further testing and found something interesting. When I am at home and can connect to HSPDA. I went into the base band and changed it to WMCDA got full access. I then changed it to GSM band and got Edge. I then went into work to test it and tried to force it to WMDCDA but it wouldn't even connect at all no coverage.
I tried it back on GSM and full coverage but only edge support. Any ideas?
Greetings
I have bought a sim free galaxy s2 5 days back . I am in japan.
From day one I have been facing strange problem. If my 3g disconnects for some
Reason such as going into elevator or traveling in underground,
It doesn't come back. I have to reset my use data package network settings or
Turn on the flight mode and turn it of f again to get connection back.
My apn settings are as per my carrier has suggested.
Because of this issue the phone become almost useless while traveling
Or while going up and down in my office building.
I haven't rooted it yet. Is this firmware problem or hardware.
Please help
samsungnikiru said:
Greetings
I have bought a sim free galaxy s2 5 days back . I am in japan.
From day one I have been facing strange problem. If my 3g disconnects for some
Reason such as going into elevator or traveling in underground,
It doesn't come back. I have to reset my use data package network settings or
Turn on the flight mode and turn it of f again to get connection back.
My apn settings are as per my carrier has suggested.
Because of this issue the phone become almost useless while traveling
Or while going up and down in my office building.
I haven't rooted it yet. Is this firmware problem or hardware.
Please help
Click to expand...
Click to collapse
Some people including myself are having connection issues when gsm/wcdma auto mode is selected...phone is stable when gsm only is selected..after comparing with 2 other phones,i can confirm this behaviour dosent happen on their phone..and i have to sadly say something is wrong with my phone..why dont you do a little experiment..try selecting gsm only mode and see if your connection is stable..maybe you are having a defective phone like some of us here...untill today i cant figure out if its a hardware fault or some weird software glitch.
Sent from my GT-I9100 using Tapatalk
In japan currently wcdma is used. After disconnecting
I can only see upward arrow all the time until I reset data network.
This is bugging me big time now
samsungnikiru said:
In japan currently wcdma is used. After disconnecting
I can only see upward arrow all the time until I reset data network.
This is bugging me big time now
Click to expand...
Click to collapse
Many people including me are having this exact same problem. I am suspecting the modem software, and hoping it will be fixed soon. But please note I also held hope for almost a year that GPS glitches in the first galaxy were fixable with software, and now we all now it wasn't.
I'm having the EXACT same problem! Out of nowhere my 3G connection is 'lost?' and I only see an upward green arrow.. i have to reboot to get this right.. but after a short while.. same problem again!
I live in The Netherlands... I wonder what the problem could be, but even better! THE SOLUTION!!
Resolved!!!!!!!!
@mmichaell I got a great news for you. I could resolve this buggy thing.
Just dial *#*#9900#*#* this will open a pop-up
from which select Disable fast dormancy....and bangggggg the issue is gone..
let me know if you get it right
nope it doesnt work for me. ive also tried *#301279# trick but still problem is there!! wat should i do? return it? its only 1 month old, same connection works flawless on my nokia n8.
I'm having serious issues with AT&T LTE in central Mississippi. The LTE network in my college down has been here for at least 8 months, but after ATT did some network upgrades last month, I can no longer access the HSPA network. If I make a call, it kicks me straight down to the EDGE network after a 30+ second delay. Same thing when I receive a call. As a result of the delay, I frequently miss calls and the phone never rings. The issue just started this month. Tried the new APN settings as suggested on other threads, and that just results in EDGE only access. I called AT&T and they forced me to do a full wipe and have them do a network reset. That didn't really fix the issue.
I am on ViperXL 2.0.0 with the latest radio (have tried the older radio too, no fix). Still on HBOOT 1.32 (I think, If not, it's 1.35) I've researched the issue to no avail as to another solution. If I could just use the HSPA network things would be fine, but when there is no LTE I drop to EDGE and the signal strength on the EDGE network here is 2 bars tops when there is 5 bars LTE, so I frequently have no signal when I used to have 5 bars. AT&T, as always in their valiant effort to cover their own butts, says there is no network issue.
Input and solutions welcomed! Thanks guys!
Just tried a sim swap with a friend. He has the s4 active and it makes the step from LTE to HSPA+ with no issues. However, his SIM in my phone still refuses to acknowledge the hspa network. Any suggestions guys? I'm running out of solutions. Problem exists on elegancia and viperxl ROMs.
This wouldn't be an issue except that I live in an area where there is literally at most one bar of edge once it drops the LTE.
UPDATE: After the new sim didn't work, I went ahead and relocked the bootloader and flashed the official RUU. No luck. It seems as though my HSPA radio has actually gone out and will not work.
Weird. I went back home and it works perfectly. But it didn't work where I currently live or anywhere along the 75 miles of travel. Regardless, the replacement HoX+ will be in next week.
Sent from my HTC One X+ using xda app-developers app
Hi,
I have been experiencing a few issues with the 4G LTE on my LG V10 H901 (T-Mobile). What happens is this.
In Network mode I selected GSM / WCDMA / LTE Auto. This initially worked fine and could get a data connection. 2 days after, I noticed I couldn't get a data connection anymore, the 4G LTE icon at the top was displaying with a down arrow lit. So I went in the Network mode and checked my APN everything was ok. Decided to switch from GSM / WCDMA Auto where I got a 4G connection (icon 4G displayed at the top) and I finally got a data connection.. Changed it back to GSM / WCDMA / LTE Auto, and there I was back on LTE... I had to reboot my phone and that is when I noticed the same thing happened again!!! No LTE connection and had to first select GSM / WCDMA Auto to get 4G.. If I reboot with GSM / WCDMA Auto I get a data connection fine.. The problem only occurs when I have the Network mode on GSM / WCDMA / LTE Auto. Anyone else having this issue? Is there a fix?
Thanks
I would say it's a hardware problem with the phone I've had mine for a month i never touched network settings and the phone gets a better data connection then any phone I've ever had LTE pretty much all the time where other phones wouldn't maybe a factory reset would fix it worth a shot
The first V10 i got from T-Mobile had somewhat of a similar problem but with WiFi, it would connect but speed was horrible. And LTE isnt that great in my area either. I read around the forums and notice that many have done factory resets and that fixes everything. I did that and lowe and behold, it did. WiFi was fast again and LTE speed improved but still sucks....its my area, not the phones fault. For some reason, a reset helps.
However, I was still just 4 days in since I got my phone so I just went back and had them replace it. I just told them that the WiFi doesnt hold....they didnt really ask me tons of questions. I replaced it only because I am paying for the phone and me having to do a "fix" to make it work doesnt sound right...so I want a new good phone lol. The new phone worked fast from the get go...no reset needed.
Just got the V10 was having those wifi issues initially so brought phne back n exchanged for another 1 and this 1 workes fine but now Im having dropped call s inside my house ,verizon said no antenna issues i can bring phne back n replace for something else or another v10 but that is time consuming ,please anyone having drop d call s....I live Long Island NY so verizon overage is better then most carriers...INaNYmin...
I began having the exact same issue on Jan 16. Had the phone since Dec 25th, worked perfect. Then, all of a sudden, it began to lose LTE connectivity. At first I thought it was a down tower, but the problems persisted an eventually got much worse wherever I went. On a full charge the phone will behave normally for a while, but eventually it starts losing data connectivity altogether, cycling between 4G LTE, 4G, 3G, 2G, trying to connect. during this process the battery drains a lot, it never really connects, and sometimes calls and text messaging fail. Tried every network setting, soft reboot, hard reboot, safe mode, clear cache, factory reset....problem persists. T-mobile concludes it must be defective. We shall see. Awaiting a replacement.
Having the same issue. Looks like it's a common problem. Any fix for this yet?
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
anonimo6971 said:
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
Click to expand...
Click to collapse
Wind works on hspa not LTE. That's why it works. I've noticed that it works fine on hspa(4g) but when I put it on LTE(4gLTE) it works for a while then stops.
gslide said:
Wind works on hspa not LTE. That's why it works. I've noticed that it works fine on hspa(4g) but when I put it on LTE(4gLTE) it works for a while then stops.
Click to expand...
Click to collapse
For me, Wind works fine on GSM/WCDMA or GSM/WCDMA/LTE
With Bell, it will not connect on GSM/WCDMA/LTE.
However, with Bell, if I put it on GSM/WCDMA, it will connect. Then if I change it to GSM/WCDMA/LTE, it will connect to Bell's LTE.
Occasionally, it will lose its data connection... and then if I toggle between GSM/WCDMA & back to GSM/WCDMA/LTE, it reconnects. This seems to happen once every 2-3 days
I don't know why it does this. It was actually very frustrating until I figured that out. I almost dropped Bell because I was not able to connect on LTE for the longest time!!
I just keep my Wind plan for the US roaming (on Tmobile LTE down there)
anonimo6971 said:
For me, Wind works fine on GSM/WCDMA or GSM/WCDMA/LTE
With Bell, it will not connect on GSM/WCDMA/LTE.
However, with Bell, if I put it on GSM/WCDMA, it will connect. Then if I change it to GSM/WCDMA/LTE, it will connect to Bell's LTE.
Occasionally, it will lose its data connection... and then if I toggle between GSM/WCDMA & back to GSM/WCDMA/LTE, it reconnects. This seems to happen once every 2-3 days
I don't know why it does this. It was actually very frustrating until I figured that out. I almost dropped Bell because I was not able to connect on LTE for the longest time!!
I just keep my Wind plan for the US roaming (on Tmobile LTE down there)
Click to expand...
Click to collapse
Yup exact same issue with me and that's how I resolve it as well I'm with koodo and I lose LTE. I was going to warranty this phone but I think it's a common issue.
I just want to quickly point out that I am seeing the exact same issue on Virgin Mobile (Bell). I also noticed that the performance of the phone decreases drastically when it is connected through mobile data instead of WiFi. Anyone else sees this and knows how to fix it?
Lg v10 t mobile no connection
I'm having a similar issue I get a 4G LTE signal but if I make a call once I end it I loose all signal including the bars it wont let me text or call it says network not available and it will do that till I travel a few miles. I'm not in a dead zone because it does it in the heart of the city and on the buisest streets in Tampa Florida then it will come back and sometimes I won't get a signal for a entire day out shoe have any solutions?
anonimo6971 said:
I have a similar issue.
it always seems to find the LTE signal, however I have no data and the battery drains very quickly.
If I have it on GSM/WCDMA/LTE, it seems to have connection issues. However, the data will connect on GSM/WCDMA. Once I have data, then if I select GSM/WCDMA/LTE, and it will connect to LTE
It is a Tmobile version. I am using it on Bell (Canada)... however it works fine with Wind & Tmobile, with no issues.
I am hoping that this will be fixed with the Marshmallow upgrade.
Click to expand...
Click to collapse
Hey,
I'm using this phone in Canada too, on Telus. Ever since the OTA update 2 days ago I've been having data connection errors over the network. Did you find a fix?
---------- Post added at 01:59 PM ---------- Previous post was at 01:51 PM ----------
SasamiAdachi said:
I just want to quickly point out that I am seeing the exact same issue on Virgin Mobile (Bell). I also noticed that the performance of the phone decreases drastically when it is connected through mobile data instead of WiFi. Anyone else sees this and knows how to fix it?
Click to expand...
Click to collapse
I'm seeing this too, but it just started after my OTA update. So frustrating bc I love the phone.
I had a similar problem. With The latest software (,,v20c,,) With the LGUP Software I software put it back (,,v20a,,) . And it seems the problem disappeared. Last part of the modem software is not good. Even test elements. Sorry for my bad english for knowledge. LGUP software very simply . ( i have V10 960A Unlocked (Eu version) android 6.0 and T-mobile LTE )
If you need help:
http://www.androidsage.com/2016/04/12/update-t-mobile-lg-v10-android-6-0-marshmallow-h90120e-lgup/
http://forum.xda-developers.com/lg-v10/general/kdz-download-lollipop-kdz-10c-lg-servers-t3332348
I have permanent SIM unlocked phone .and I want to update to mm6.0
Present software :5.1.1 loollipop
Rooted :yes
It's mobile h901
Warranty:I bought imported phone unlocked so no warranty guide me safe way to update my phone
Thanks
Almost 4 months of having this problem. I dont know exactly what have caused this. I have a D6503 device, and when I tried to register to 3G or 4G network, the device looses the signal "emergency call only", but when I check GSM only the signal comes back. I remember the time when I open *#*#4636#*#* and selected USA band only, that time I looses signal. I reflash my D6503 using flash tool. and the signal comes back. but I dont know exactly if the cause of having no 3g or 4g signal was the result of that. i cant remember anymore. I hope someone here could enlighten me or give me some idea if what exactly is the problem of this unit. Im sure that the simcard reader is fine.
borjok536 said:
Almost 4 months of having this problem. I dont know exactly what have caused this. I have a D6503 device, and when I tried to register to 3G or 4G network, the device looses the signal "emergency call only", but when I check GSM only the signal comes back. I remember the time when I open *#*#4636#*#* and selected USA band only, that time I looses signal. I reflash my D6503 using flash tool. and the signal comes back. but I dont know exactly if the cause of having no 3g or 4g signal was the result of that. i cant remember anymore. I hope someone here could enlighten me or give me some idea if what exactly is the problem of this unit. Im sure that the simcard reader is fine.
Click to expand...
Click to collapse
I hope someone here could help me figure out this problem. The 3G and 4G signal on my place is OK. I have a correct APN for this. But the problem is, everytime i enable data, i looses my signal, and my simcard cant register to the network. and a message network not available. When i search for networks, LTE, 3G, GSM will appear, and when I click LTE signals, the phone cant register to network, and I will have no signal then. If i choose GSM (2G), that's the time that I can have a network signal. Would it be posibble that the antenna are defective? (the smaller one where the other end of the wire attached, I think its the board rf aerial PCB flex cable ? I hope some one here can help me