Related
Hello
I have Router linksys with web2 password.
when i turn on Wi-Fi only appair on the screen (open network) which not secure near to me but my secure network is not shown, if i remove web2 pass. i can see again my network.
what is the problem?
abody1111 said:
I have Router linksys with web2 password.
Click to expand...
Click to collapse
Hmm are you typing with auto-correction on?
If you mean WPA2-PSK (WPA2 with password), then I can confirm that this works.
I have a similar issue with my 'O2' router (rebranded Thompson 585 V7) and have WPA+WPA2 (WPA-PSK Encryption) setup.
All devices in my home (laptops & Ipod Touch's) have no problems, but my new Hero continually fails to get an IP address. Seems to connect OK but then continualy cycles therough 'Obtaining address'... 'failed'.... 'Obtaining address'!
It did successfully connect once for about 20 mins, but after a phone off/on, has gone back to failing.
I'll experiment further, but may have to return the device
Regards,
Glenn
Volker1 said:
Hmm are you typing with auto-correction on?
If you mean WPA2-PSK (WPA2 with password), then I can confirm that this works.
Click to expand...
Click to collapse
sorry you are right
plz solve my prob. if you can
abody1111 said:
sorry you are right
plz solve my prob. if you can
Click to expand...
Click to collapse
I'm still waiting for my hero, so I might be wrong. But according to the manual, the hero can only handle WEP encryption on WiFi. WPA/WPA2 are not supported. I think, for the hero to work on WiFi, you must change the encryption on your router either to WEP or to unsecure.
gh01 said:
I'm still waiting for my hero, so I might be wrong.
Click to expand...
Click to collapse
I tried WPA-PSK and WPA2-PSK with my Hero and they definitely work. Sorry, mate ;-)
If the OP wants some help he needs to post some useful data about his setup and what works and what does not work.
I can confirm it works for wpa2-psk and PEAPv0/EAP-MSCHAPv2
Wi-FI is not working with secure network
Hi
I had same problem with BT Home Hub2 all i did was a soft rest and it worked and had no more problems so try soft resetting you routor
Well, as posted earlier, despite several hours of every possible combination of settings and factory resets, I can't get my Hero to use my WiFi (WPA+WPA2, WPA-PSK Encryption).
I have seven other devices that have no problems at all (I configured them all), so I'm assuming it's an issue with the Hero. Therefore, it's going back to it's supplier.
Regards,
Glenn
knnelg said:
Well, as posted earlier, despite several hours of every possible combination of settings and factory resets, I can't get my Hero to use my WiFi (WPA+WPA2, WPA-PSK Encryption).
I have seven other devices that have no problems at all (I configured them all), so I'm assuming it's an issue with the Hero. Therefore, it's going back to it's supplier.
Regards,
Glenn
Click to expand...
Click to collapse
Yep it may well be a faulty one if its from a store try get them to test it if they can if not the get the new one home and try again you might also wont to try it on someone else wifi see if it works on theres. Also it might be that the amount of device conected to it may be causing a problem on first time setup, you could try it on its own then let other device connect to route worth a try
You should bear in mind that sometimes certain devices just don't get on. Someone posted here earlier with a similar issue, and they found changing their router from the Orange supplied box to another one "fixed" their issue.
Regards,
Dave
I found problems connecting my Hero to our Belkin N1 Vision ADSL Modem/Router using WPA2-Personal.
In the end it turned out that re-enabling the option to broadcast the SSID solved the problem. For some reason creating a connection manually to a network which does not brodcast caused the issue for me.
Regards,
Ian
ianm said:
In the end it turned out that re-enabling the option to broadcast the SSID solved the problem.
Click to expand...
Click to collapse
So there is a generic advice, run your wifi in a standard-compliant mode. Broadcast SSID and turn off all the vendor-specific "turbo mode" and "extra-long/short" packets crap.
Problem with wpa2 enterprise
I am not able to connect to wifi at work.
We use wpa2-enterprise with PEAPv0/EAP-MSCHAPv2 and broadcast SSID.
Hero detects wifi network with incorrect security. It displays: "(network SSID) secured with WEP". When I tap on it it asks for WEP hex key...
I tried to add wpa2-enterprise network manually. It says "not in the range" and keeps offering me the above one with wrong security...
any ideas?
wifi works fine on other phones
Hi guys, in this days i have noticed a problem with my gsII.
Sometimes I have the gsII connected to my router but internet connection doesn't work.
I'll try to explain better what i mean... I start wifi on my gsII and use internet connection without problem. Then I set the phone in standby mode leaving wifi on. When after a while i want to use internet connection, it doesn't work. The telephone is still connected to my router but i can't use internet on the phone.
The only way to make internet connection work is to disable wifi e then reactivate it.
This is really frustrating....
I've got the telephone from three months but only now I'm noticing this problem because first I used to disable the wifi and activate it only when i need it.
Am I the only to have this problem? Is there a solution?
Thanks to everyone in advance... any help would be appreciated
A video is more than thousands of words, so this is an "example video" of the bug:
http://www.youtube.com/watch?v=4um-AqLk1jw
Test it with a different router, i.e. Cisco E4200.
It would a good idea but i have to buy a new router or go to some friend's house for 2-3 hours. I'll keep this idea in my mind thanks
I have this problem, mines a bt home hub v3. Don't think its the router I blame the phone. I have to restart phone to make it connect with ability to use internet
Sent from my GT-I9100 using XDA App
finito02 said:
Hi guys, in this days i have noticed a problem with my gsII.
Sometimes I have the gsII connected to my router but internet connection doesn't work.
I'll try to explain better what i mean... I start wifi on my gsII and use internet connection without problem. Then I set the phone in standby mode leaving wifi on. When after a while i want to use internet connection, it doesn't work. The telephone is still connected to my router but i can't use internet on the phone.
The only way to make internet connection work is to disable wifi e then reactivate it.
This is really frustrating....
I've got the telephone from three months but only now I'm noticing this problem because first I used to disable the wifi and activate it only when i need it.
Am I the only to have this problem? Is there a solution?
Thanks to everyone in advance... any help would be appreciated
Click to expand...
Click to collapse
I do not know what " standby mode" is? I have the same phone and have no problems with wifi. The phone goes to sleep when I do not use it and awakes when I use it.
It seems that your phones wifi is sleeping and not waking up. I always turn it off when not using it anyway. Not the full answer but it works for me.
Sent from my GT-I9100 using xda premium
I don't use wifi very often, but I do notice this problem with 3G data. Modem problem? I'm using kh3.
Sent from my GT-I9100 using XDA App
I believe I know and had the problem you describe.
For me the Wifi would work perfectly at first and then after the phone had been left for a while I would try to use it and get 'no connection' type errors. Sometimes it would even stop working even if I just waited too long with the phone still on in my hand.
I found that if I either disabled router wifi security or set it to WEP the problem disappeared. The issue occurred on 2.3.3. My router is a DLink one fyi. I have yet to test 2.3.4 which came out yesterday in Sweden. Ill let u know.
What version android are u? Does relaxing ur wifi security fix it??
Sent from my GT-I9100 using XDA App
I really should have said that is a workaround not a fix. I can add also that I have contacted Samsung about it. They cannot confirm or deny thru issue but suggested that I take the phone to their service centre. Yay...
Sent from my GT-I9100 using XDA App
I had this issue...the solution is...go to wifi settings>>>advanced>>>>regulatory domain>>>>change channel to 14 instead of 11....
Hope this helps...
Sent from my GT-I9100 using XDA App
I do not know what " standby mode" is? I have the same phone and have no problems with wifi. The phone goes to sleep when I do not use it and awakes when I use it.
It seems that your phones wifi is sleeping and not waking up. I always turn it off when not using it anyway. Not the full answer but it works for me.
Click to expand...
Click to collapse
Ehm...For standby mode I mean that I lock the phone, I only shut down the display....understand what I mean?
If you turn wifi off when you don't use it, you'll never see this bug. Try to leave wifi on for some hours if you want to understand if also your gsII has this bug.
I don't use wifi very often, but I do notice this problem with 3G data. Modem problem? I'm using kh3.
Click to expand...
Click to collapse
I'ms using kg1, i've also head about people that have this problem with 3g. Try to keep the wi-fi on for some hours (disabling 3g) to understand if you have the problem
believe I know and had the problem you describe.
For me the Wifi would work perfectly at first and then after the phone had been left for a while I would try to use it and get 'no connection' type errors. Sometimes it would even stop working even if I just waited too long with the phone still on in my hand.
I found that if I either disabled router wifi security or set it to WEP the problem disappeared. The issue occurred on 2.3.3. My router is a Netgear one fyi. I have yet to test 2.3.4 which came out yesterday in Sweden. Ill let u know.
What version android are u? Does relaxing ur wifi security fix it??
Click to expand...
Click to collapse
Yes, this is exactly what I mean. I have 2.3.3 with KG1. In this days this bug is happening really often...
I don't know what to do...
I really should have said that is a workaround not a fix. I can add also that I have contacted Samsung about it. They cannot confirm or deny thru issue but suggested that I take the phone to their service centre. Yay...
Click to expand...
Click to collapse
I'm wondering if a full wipe would help . In this days I'm really hating this bug.
Ps: A really strange thing of this bug that i've noticed is that internet connection doesn't work but the program androidVNC perfectly works!! Instead if I try to open 192.168.0.1 (router address) with any browser (opera, dolphin, stock's browser) it doesn't work!!
Really really strange.....
I had this issue...the solution is...go to wifi settings>>>advanced>>>>regulatory domain>>>>change channel to 14 instead of 11....
Hope this helps...
Click to expand...
Click to collapse
But are you talking about the phone settings or the router settings? On the router I'ms using channel 6...
M talkin abt phone settings...
Sent from my GT-I9100 using XDA App
I had this issue...the solution is...go to wifi settings>>>advanced>>>>regulatory domain>>>>change channel to 14 instead of 11....
Hope this helps...
Click to expand...
Click to collapse
I don't have "regulatory domain" in advance setting .... :S
zainqaiser said:
I had this issue...the solution is...go to wifi settings>>>advanced>>>>regulatory domain>>>>change channel to 14 instead of 11....
Hope this helps...
Click to expand...
Click to collapse
I tried changing the channel also. I have heard others getting this to work. Didn't work for me. You can use Wifi Analyser app on phone to find a clear channel and see how u go changing your router perhaps?
I tried re flashing also using factory restore. No fix for me.
Also noticed that u can sometimes get phone to work by toggling Network Data on/off. Not really fun either.
The wifi channels and security settings I am talking about are settings in the router not the phone. What wifi security are you using in your router?
Sent from my GT-I9100 using XDA App
I am not a believer the router is at fault in any case. I would entertain an incompatibility but nothing more.
Original router and security settings work fine for...wait for it...an iphone 3gs and a Motorola Defy (yes the phone which seems to have issues with doing everything else!)
Either way an incompatibility is not acceptable either if that's what it is
Sent from my GT-I9100 using XDA App
Also noticed that u can sometimes get phone to work by toggling Network Data on/off. Not really fun either.
Click to expand...
Click to collapse
I know this, and in fact i have to switch off and on wifi connection when this happens.
Now i'm trying to use channel 5 with the router ( but yesterday I've tested channel 6 and 13 without any result)
I hate this bug because beacause it happens only when he wants! I'm quite sure that assistance wouldn't solve the problem. A friend of mine has changed three gsII and said that every gsII that he has changed had this bug!
Ps: Another question.... How often do you have this bug?
Once a week? Once a day? Three times a day?
mwiggi said:
I have this problem, mines a bt home hub v3. Don't think its the router I blame the phone. I have to restart phone to make it connect with ability to use internet
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Is NOT the phone.
i have the same problem reported in the 1st post.
i have been turning wifi off and then on again for a quick fix until now but i think the solution might be to drop the security on the router from WPA to WEP. Haven't tried it yet tho, because it doesn't bother me that much.
I had an ipad previously (before i had the SGS2) and it had exactly the same behaviour. I looked up the problem then and found a FAQ from the ISP that mentioned a compatibility problem between ipad and that router, so their suggestion was to set the router to WEP only.
have been turning wifi off and then on again for a quick fix until now but i think the solution might be to drop the security on the router from WPA to WEP. Haven't tried it yet tho, because it doesn't bother me that much.
Click to expand...
Click to collapse
I don't know if this solution works, I'll try it in this days.
Anyway... really compliments Samsung !!!
finito02 said:
Ps: Another question.... How often do you have this bug?
Once a week? Once a day? Three times a day?
Click to expand...
Click to collapse
Easily more than 3 times a day but then I use the phone a lot.
Problem had never occurred when I used only 3G. That was my workaround when I got fed up with it before I dropped the wifi security.
finito02 said:
Ps: Another question.... How often do you have this bug?
Once a week? Once a day? Three times a day?
Click to expand...
Click to collapse
For me it happens always after the phone comes back from stand by with wifi on.
steps to reproduce:
1-turn wifi on, and check it's connected and working
2-press power button to turn off screen
3-turn phone back on, try to access a new web page, it doesn't work
I noticed that while it's in stand by i will still receive email notifications so it probably only looses the connection when i turn it on again.
Also, if there was some program working (say, a download) when i went into standby it will probably still be transferring when it comes out of stand by, it's just the new connections that fail.
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
HcMAX said:
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
Click to expand...
Click to collapse
Is it password protected? If so try making it 'open' or change the encryption type.
Skander1998 said:
Is it password protected? If so try making it 'open' or change the encryption type.
Click to expand...
Click to collapse
Hi,
first thanks for the quick reply,
yes the network is password protected...I changed the encryption type for the WPA not the WPA2 and the problem still persists...
the thing that kills my brains is that, to connect to the bridge I must restart the the access point every morning,....
thanks
Do you have DHCP enabled on the 2nd router?
larryk said:
Do you have DHCP enabled on the 2nd router?
Click to expand...
Click to collapse
yes, I guess so....., should DHCP be enabled or disabled?
sorry but this situation is driving me crazy.....
I cant connect to the brigde/extender network right now with both my android phones and android tablet, however with my laptop running windows 8 I can......
wth??????
this is so frustrating!!!!!
Are you sure the second device extends the main access point and not just create a new WLAN?
Have you updated the firmware of both devices?
What devices do you have?
Am I understanding correctly that your laptop does work even though both Android devices don't (before you reboot the extender)?
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Both have latest firmware? Might be a bug in the WiFi driver of the AP/ROUTER... or it's in Android.... you will need to test by trial and error I guess...
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Dynamic would be the friendliest to work with... you could try if it's a DHCP issue by setting a fixed IP when the problem occurs, but I don't think it is.
This is not a problem with the phone(s)....is with the router config. Contact the manufacturer for further assistance...
HcMAX said:
yes, I guess so....., should DHCP be enabled or disabled?
Click to expand...
Click to collapse
If you got a router and a range extender, there's nothing you need to fiddle with because the range extender will just Relay DHCP requests between client and master router.
Two routers* pushing out IP addresses is a no go, there will be a conflict in your scenario, and all range extenders will of course take this into account.
If you had two "real" routers*, it would still be possible to set everything up, although then there's a lot to take into account.
* Router is a inaccurate term used for the consumer grade combination devices. They're in fact a router, a switch, and a wireless access point bundled in a neat package. Sometimes with a xDSL modem or something on the external interface of the router.
Try setting the IP to static and more important, try giving it a default gateway to the routers IP. That should make it easy for your phone to directly look for the gateway it is looking for.
Sent from my Galaxy S3
I have three routers, one main, one extender, one repeater (creating a whole new network for other building). Both main and repeater are the same network. All is config as per DD-WRT documentation. All three have latest DD-WRT.
After trying many things, all I can say is the (or mine at least) S3 always has trouble when many APs are nearby. I don't use VOIP because of that (it could disconnect at any time).
Next step on my list is to have 3 different SSIDs (only two now) and try using tasker to debounce the wifi switching (if that is even possible).
Hi
I have a very weird problem with Galaxy S3.
The problem is that suddenly out of the blue, the phone no longer connected to my home wifi, which it had no problems connecting to it.
the signal is extremely weak, and only connects to it when you sit next to the router.
When you forget the connection, the bars go up and connection looks very strong. as soon as you start connecting to it, it drops to the way it was, and not getting connected.
All other stuff I have (laptop and other phones) work perfectly, so not a router thing
I have rooted and updated to the latest ROM, but still same problem.
Any help would be appreciated.
is this happening with all wifi networks or just ur home network. If only on home network then try turning off your router and then restart it after some time to see if thats causing the problem.
also have u installed any updates/roms recently?
endingcolt007 said:
is this happening with all wifi networks or just ur home network. If only on home network then try turning off your router and then restart it after some time to see if thats causing the problem.
also have u installed any updates/roms recently?
Click to expand...
Click to collapse
Well, I have not tried any other wifi, but I have another phone and laptop that work perfectly with the same router.
I also restarted the router, but nothing's happened.
I installed another ROM, but this time it keeps asking for password as it says it is incorrect. but as soon as I stand next to the Router, it hooks up to it with same supposedly incorrect password.
Regards
endingcolt007 said:
is this happening with all wifi networks or just ur home network. If only on home network then try turning off your router and then restart it after some time to see if thats causing the problem.
also have u installed any updates/roms recently?
Click to expand...
Click to collapse
Any help please!!
Had similar problem and I think a few people experienced this where suddenly the phone stops playing nicely with WPA2 security, so that's worth looking into
slaphead20 said:
Had similar problem and I think a few people experienced this where suddenly the phone stops playing nicely with WPA2 security, so that's worth looking into
Click to expand...
Click to collapse
you mean WPA2 of the router? if so, but it used to work perfectly before.
aerohaith said:
you mean WPA2 of the router? if so, but it used to work perfectly before.
Click to expand...
Click to collapse
So did mine! I tried everything, ended up using WPA-PSK out of desperation!
slaphead20 said:
So did mine! I tried everything, ended up using WPA-PSK out of desperation!
Click to expand...
Click to collapse
Mine is already WPA-PSK
aerohaith said:
Mine is already WPA-PSK
Click to expand...
Click to collapse
Try a Google, there were a few threads concerning it a while back, with several solutions I seem to remember
Try running router for a few days with no security see what happens .
jje
Nothing worked!!!
Dear all,
I have tried every solution there is, tried so many routers , work, hotels, cafes ..nothing same problem keeps coming up - authentication error occurred.
when you get close enough to router it works automatically.
I have since replaced firmware many times, have replaced the antenna, but nothing ...same problem.
Any help please, I am out of ideas!!!
The only idea for me is dump it and buy an iphone!
Same Problem!!!!
aerohaith said:
Dear all,
I have tried every solution there is, tried so many routers , work, hotels, cafes ..nothing same problem keeps coming up - authentication error occurred.
when you get close enough to router it works automatically.
I have since replaced firmware many times, have replaced the antenna, but nothing ...same problem.
Any help please, I am out of ideas!!!
The only idea for me is dump it and buy an iphone!
Click to expand...
Click to collapse
I am facing the exact same problem with my S3.
I have all security/no security. Is there any solution?????
i can also try to repair my phone, provided someone can explain what to repair.
Looking for a response.
Same problem
Hi,
I have the exact problem.
Wifi works when phone close to router (2-3 metres). When away it still shows connected but wont have internet access.
If I try to connect little away from router with full wifi signal, it says "Saved Secured" or Authentication error.
Tried flashing different stock roms but still same problem. Tried resetting router. Tried changing router channel and disabling security. But still same.
Anyone fixed this issue?
amarbanga123 said:
I am facing the exact same problem with my S3.
I have all security/no security. Is there any solution?????
i can also try to repair my phone, provided someone can explain what to repair.
Looking for a response.
Click to expand...
Click to collapse
notorius3 said:
Hi,
I have the exact problem.
Wifi works when phone close to router (2-3 metres). When away it still shows connected but wont have internet access.
If I try to connect little away from router with full wifi signal, it says "Saved Secured" or Authentication error.
Tried flashing different stock roms but still same problem. Tried resetting router. Tried changing router channel and disabling security. But still same.
Anyone fixed this issue?
Click to expand...
Click to collapse
Have you both tried a complete clean install? And by that I mean wiping /system /data /preload cache and delvik.
Yes, i have even tried other roms too..
Yes.
Darke5tShad0w said:
Have you both tried a complete clean install? And by that I mean wiping /system /data /preload cache and delvik.
Click to expand...
Click to collapse
Hi, Thanks for the response.
Yes I did everything through recovery. I havent rooted my device. So I cleared cache and did factory reset through recovery.
Hello everyone,
Last week, suddenly i could not connect to my Home Wifi. And now that I am at the office a tryed again. No luck.
When I hit the SSID in my netwrok list it seems to connect but within a seconde it says: savec, secured. And I un-disable the screen so i can hit the network name again.
I just performed a reset, probleem is sill here. Is this a hardware issue? Is there some logging somewhere?
Kind regards,
Dj Ango said:
Hello everyone,
Last week, suddenly i could not connect to my Home Wifi. And now that I am at the office a tryed again. No luck.
When I hit the SSID in my netwrok list it seems to connect but within a seconde it says: savec, secured. And I un-disable the screen so i can hit the network name again.
I just performed a reset, probleem is sill here. Is this a hardware issue? Is there some logging somewhere?
Kind regards,
Click to expand...
Click to collapse
If you are on stock rom, you can try entering service mode by dialling *#0011# and disabling Wireless Power Saving mode.
There was another fix involving etc/wifi folder on the device,but I cant find the thread atm.
RazorMC said:
If you are on stock rom, you can try entering service mode by dialling *#0011# and disabling Wireless Power Saving mode.
There was another fix involving etc/wifi folder on the device,but I cant find the thread atm.
Click to expand...
Click to collapse
I changed it but it has no influence. With wich program can I record my screen in order to post it here?
It actualy disconnects only 1 second after trying to connect.
Kind regards,
Dj Ango said:
I changed it but it has no influence. With wich program can I record my screen in order to post it here?
It actualy disconnects only 1 second after trying to connect.
Kind regards,
Click to expand...
Click to collapse
I'm trying to find the right thread which had this info.
You can also make sure that the router doesn't have too many connected devices, sometimes that is also a problem.
BUT if it connects and then drops (It says "Connected" then "Saved, Secured") then that could also mean hardware issue. Because there is no problem connecting but your phone can not maintain connectivity.
RazorMC said:
I'm trying to find the right thread which had this info.
You can also make sure that the router doesn't have too many connected devices, sometimes that is also a problem.
BUT if it connects and then drops (It says "Connected" then "Saved, Secured") then that could also mean hardware issue. Because there is no problem connecting but your phone can not maintain connectivity.
Click to expand...
Click to collapse
I think it's an hardware issue. It stops suddenly after 2 years of good service. Do you know if it's something that can be replaced? Or is is on the mainboard? And shoudl i buy a new one?
Dj Ango said:
Hello everyone,
Last week, suddenly i could not connect to my Home Wifi. And now that I am at the office a tryed again. No luck.
When I hit the SSID in my netwrok list it seems to connect but within a seconde it says: savec, secured. And I un-disable the screen so i can hit the network name again.
I just performed a reset, probleem is sill here. Is this a hardware issue? Is there some logging somewhere?
Kind regards,
Click to expand...
Click to collapse
In router set a google DNS