Related
I've read some people who have tried rooted there phones have completely bricked the phone to the point they cant restore it? Is this really possible? Because i have had my phone for some time now, and am thinking of rooting but dont want to break it...
Thanks
If you get the Phone ---> Computer screen and you have locked hardware access, there is no fix for it right now (unless you're lucky and somehow get adb to work).
If your phone can get to download/recovery mode from a powered down state (using the physical buttons) then its pretty much unbrickable.
Edit: I have locked hardware access and I rooted my phone. It seems pretty low-risk as far as I can tell.
it really only happens to people who can't properly read instructions right or when they're flashing things labeled 'BETA'.. i would personally attempt to get into download mode using physical buttons, if you're able to do that and you know how to flash back to stock using Odin.. you're fine, search the forum for instructions on getting to Download mode.
Being rooted will have NO risk of bricking your phone.
It's flashing custom roms and such that poses the risk.
I'm glad my Vibrant isn't hardware locked like the newer ones. I got the Phone--Computer error when flashing the gps fix/beta rom. Luckily, it was super easy to fix, but if I couldn't use the volume buttons it's impossible.
So, if you want to get root to do things like share your wifi or have adblocking on your phone, you'll have no real risk, but flash at your own risk.
Edit:
See if you can get into download mode by using your hardware buttons.
Turn your phone off
Plug into USB on your computer
Wait until battery status comes up
Hold down both volume keys and power. When powered up, stop hitting power.
If you get into download mode, your chances of actually bricking your phone are significantly lower than they would be if you couldn't. Not 0%, but definitely a lot better odds going in your favor.
The software really should've been called Loki because it's a tricky bastard and just likes to randomly screw you over.
EDIT2:
OK, Turns out the way I suggested you get into download mode is the hard way (it was how I learned to do it).
The EASY way is to plug your USB cable into the computer but NOT the PC.
Turn off your phone.
Hold down both volume keys and plug the USB in.
The phone should power up in download mode without you even needing to hit power.
ok but is there a difference between download and recovery
- Recover shows you a nice menu with a few options.
Allows user to use menus with the use of his Vol +/- and power button
- Download shows a HUGE triangle with an android digging with a shovel and says download
Normally used to flash with ODIN
kizer said:
- Recover shows you a nice menu with a few options.
Allows user to use menus with the use of his Vol +/- and power button
- Download shows a HUGE triangle with an android digging with a shovel and says download
Normally used to flash with ODIN
Click to expand...
Click to collapse
ok im in discover mode but not connecting to my drivers i guesst but its failing at everything what can i do to by past the bs of the drivers
mystycs said:
I've read some people who have tried rooted there phones have >>completely bricked the phone to the point they cant restore it<<? Is this really possible? Because i have had my phone for some time now, and am thinking of rooting but dont want to break it...
Thanks
Click to expand...
Click to collapse
Reading and understanding instructions will almost always prevent this ..... taking some time to research the basics is a plus....
ROOTING never causes bricking .,..,.,. USER error is the culprit 100% of the time ....
"completely bricked the phone to the point they cant restore it"
You said it .,.,. this is what is ment by bricked *no boot at all*.. only way to fix on some devices is by the use of Jtags(See xda-WIKI). Only android device that has this option so far is the G1 ( don't know if they got it 100% working yet )... Not being able get into download mode because of locked hardware buttons is not bricked... just got to find a work around ,or find out how they are locking the buttons ...
mrlamar09 said:
ok im in discover mode but not connecting to my drivers i guesst but its failing at everything what can i do to by past the bs of the drivers
Click to expand...
Click to collapse
In this link
HTML:
http://forum.xda-developers.com/showthread.php?t=771111
, you'll find most of the stuff you'd need.
Odin, Samsung drivers, etc...
i cnt get to the debugging thing at all i need some way or some how for Odin to read my fone PLEEEEEAASSSEEEE ANYONE SAVE SHOULD I USE A MAC OR SOMETHING CUS IM running a hp with windows 7 and its not working idk pm or something ill do anything to get the vibrant back and runnign
How exactly do I test the recovery mode, do I just press vol up, down and power or does it have to be off our plugged in?
Well, after spending almost 11 hours trying to boot into recovery or download, I know for sure that there is something going on with my phone re: hardware locked. The date on my box is 7-16. It is an early Vibrant. But no matter what I do, I cannot get into download or recovery which means my ****ing phone is literally worthless.
I have tried all possible thousands of combination's of buttons, batteries, and cords while booting and nothing happens.
The Vibrant logo shows, then it shows the pink, annoying as hell T-mobile logo, than goes to the Galaxy S logo which loads for a little bit and then just leads me to a black screen. Eventually the 4 buttons on the front of the phone turn on and then nothing else happens. It will just sit like this forever.
I know all I need to do is get a working ROM loaded but it is literally impossible to do so.
Can anyone offer any suggestions? Or are anyone else having the same problem?
I guess the only way I can get a working phone is to get in touch with T-mobile and do a Warranty exchange. That's a damn shame too, because I will be without a working phone for a week.
What about using adb?
adb reboot recovery -or- adb reboot download ?
I had a hw locked vibrant, never tried the adb reboot download, recovery did work.. I added another line on my account last night for somone, who got a vibrant, theirs wasn't hw locked, so I traded 'em ;P
Agree with the above poster I have been stuck on the vibrant screen or dark screen and adb still worked to save me
when i try to use adb, it just tells me that it cant find the device. i'm not able to boot into android OS at all.... screen just hangs. so my computer is never getting a chance to see my phone hence why i cant use adb to reboot it into recovery or download.
I believe your device has to go into recovery mode then check with and devices and if you see a device I THINK it is and reboot download, I am 90% certain
Sent from my SGH-T959 using Tapatalk
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
98classic said:
have you installed the drivers? phone DOES NOT have to boot into android for adb to read it.
Click to expand...
Click to collapse
i do believe i have the correct drivers installed. i was able to use adb to run lagfixes before i was having this problem. when i boot my phone, i get a sound from my computer saying that it recognizes a usb device. the two drives in the vibrant show up in My Computer but i cannot access them as windows says they are not accessable at the moment.
at what point will adb be able to recognize my phone when booting? no matter what i do when i try adb shell i get error: device not found
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Same problem here. I probably just have to sell it fast on ebay or something. Hopefully some kind of fix starts by the end of the week. First phone in my smartphone life to brick from a simple Voodoo lag fix. Please XDA gods find a solution.
crazycaveman said:
It could be the phone not bring in debugging mode, either because it's been turned off or the os isn't getting far enough to turn it on. I think I've been able to get adb to recognize my phone even while it was booting up (at the white vibrant screen). Maybe you can try adb then?
Click to expand...
Click to collapse
nope, no go. adb will not recognize my device no matter what. and the device isnt loading the OS so i cannot turn debugging on. i guess this is a real "brick" then.
This sounds like a rant rather than a question. Just sayin'.
DKYang said:
This sounds like a rant rather than a question. Just sayin'.
Click to expand...
Click to collapse
fixed that. my bad.
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
renocivik said:
Check my thread in the dev section... I can get ADB working when you are stuck at the vibrant screen... MIGHT... just might work in your situation...
My thread is probably fallen back a few pages now... its a [Guide] [Think Tank]
Click to expand...
Click to collapse
thanks for the suggestion. i found your thread and went through the steps in the OP... still no luck. no matter what i do, i cannot get passed the black screen the loads after the galaxy s logo. i also cannot get into download mode or recovery no matter what combination of button presses i use.
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
core99 said:
just do the following , i used to have the problem of going into the download mode and this is what realy worked to me :
1- turn off the phone.
2- plug in the USB cable.
3- wait until the battery green charging start.
4- press the vol + , vol - , the power botton together.
5- when the screen gose black release the power botton only.
you should now be in the downloading mode
Click to expand...
Click to collapse
this isnt working either. :-(
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
atoz350 said:
I just fixed this on my phone. Your phone will go into download mode. Plug the phone in and wait for the battery symbol to fully load. Hold Vol + and _ and PWR until it goes black, then release the PWR button only. It will go into DL mode. Fire up Odin, and flash the "Froyo that does not brick" ROM. It will boot into the i9000 recovery mode and give you an error. Hold the Vol + and - and PWR again and release PWR when the phone goes black. It will go into DL mode again. Now with Odin, flash the factory firmware, making sure to click re-partition this time. After the phone reboots, it will fire right up into the factory ROM.
Click to expand...
Click to collapse
this is exactly the method i want to try. but unfortunately i cannot get the phone into recovery or download mode. i have tried at least 100 times now with many different combination's of plugging the usb cord in and pressing the volume and power buttons.
two ideas: one, is it possible that i wiped recovery and download mode from my phone on accident? the reason why i ask is that i was super tired and flashing roms and kernels to my phone. i flashed back to my original stock rom and then i flashed the kernel. for some reason, i selected wipe date/cache in Rom Manager before flashing the kernel. i have no idea why i did this. seriously. totally noob move. so im assuming i have a kernel flashed but now there is no ROM installed for the phone to boot into.
two, if above is not the issue, than im going to assume that the phone is not recognizing any button presses while its off, so when i turn it on it just recognizes that the power was pressed and ignores the volume presses, thus not booting the phone into recovery or download.
edit: i should mention again that at no time does adb recognize my device. so i cannot use adb to reboot the phone into the mode i need.
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
byt3b0mb said:
just a comment for the OP - the vibrant isnt worthless, it is something that YOU did to get the phone into its current state. So dont blame the phone for something that it didnt do on its own.
/end rant
Click to expand...
Click to collapse
I understand what you mean. I appreciate your criticism of my original post. Let me say that I wrote it while frustrated. But I know that isn't an excuse.
The device is fantastic. I know that I did this to it myself. It's unfortunate.
Anyways, I received a replacement phone. I will be more careful this time.
Sometimes my I5500 won't turn on.
This has already happened 2 times (with two different firmwares I5500XWJPL and I5503TTLPJP9). The phone shows absolutely no signs of life - screen is black, no sounds, nothing.
I tried everything: pressing VolumeDown+Center+Power, VolumeDown+Home+Power, with or without battery/SIM/charger/SD. Tried removing battery for 30 minutes, charging battery in external charger.
Sometimes when charger is connected, it shows green battery on the screen, but still won't boot.
Last times I spent several hours fiddling with it until it finally turned on..
Can someone tell my if there is a fast way to revive the phone next time this happens?
Maybe your arm11boot is damaged, but still partly working. You need replace that partition. I saw arm11boot partition image in one Russian FW. I can't remember actual name. You can try that, but caution. You might brick your phone compleatly!
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Rigardi said:
sorry for reviving this thread.
but I got the same problem now. Tried to use ROM Manager to install CWM Recovery (following a blogpost explaining how to install a Custom ROM on the SG5). Might have accidentally clicked a different CWM Rec. version than I thought I did. However, ROM manager showed a message, telling me that CWMR was installed correctly.
So I wanted to boot into CWMR up to flash my device with the latest CyanogenMod 7 port from MADTeam. Used the "boot into recovery" option from ROM manager for that purpose. The next thing I know is my phone not reacting to anything.
Tried all methods mentioned afore (Vol- + Home + Power / Vol- + Center + Power, with/w.o. SD card and/or battery inserted). Screen keeps being off, no sign of life, phone wont even do anything when plugged to my PC or a charger.
The phone has been rooted properly before and was running Stock 2.1. Houston, we've got a problem.
Click to expand...
Click to collapse
Take your battery out, put it back in and turn your phone on, then it will boot up into recovery mode. I also have this problem from time to time, sometimes it boots into recovery, sometimes not and i have to remove/replace the battery.
I actually thought that this might be a useful feature for say - if you wanted to upgrade a friends phone to cyanogenmod in the pub, for example.
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Rigardi said:
did try that. now even had the battery removed for about an hour. put it back in. still no reaction on pressing the power button or one of the combinations that should put it into recovery or download mode. no sign of life when plugging the phone to my computer or the charger.
I do fear the worst, though I dont know how ROM manager was actually able to brick the phone that badly.
Click to expand...
Click to collapse
In that case then this also happened to me - While exploring the rom manager application after first ever flashing my phone i accidentally selected the wrong phone model from the 'flash clockworkmod recovery' option and my phone was gone forever. Perhaps your problem is similar.
(Luckily it was under warranty and they replaced it. The method worked so well in fact it happened 'accidentally' a second time i acquired a 3rd i5500 out of the box )
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Rigardi said:
bought mine already used, so no chance for a warranty replacement :/
gonna give it a shot with a usb jig now, maybe i can get the thing into d/l mode with that, so I can revive it with odin.
Click to expand...
Click to collapse
what about the Emergency DLoad Mode, which is not the Download Mode? Did you try it?
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
how do I access emergency d/l mode?
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
ops, sorry: I miss your previous message!!
Now I got it and read this last post.. let some time to think about it, I'll replay soon.. but, generally speaking, at this point there's not so much you can do..
If you can get it into Download or Recovery mode, then you should be fine.
Sent from my GT-I5500 using XDA App
Rigardi said:
UPDATE
I actually CAN get download mode (or what I assume it to be) running by pressing Vol- + Menu + Power (while Vol- + Home + Power wont do anything, nor does the USB jig that arrived today). Took me some time to discover this, as this doesnt seem to be the usual 3-button-combination used. BUT: while the phone is now recognized by my PC, it wont show anything on the screen.
Odin (tried 4.28 and 4.43 on both win7 x64 and x32 and everyting related to Kies shut down) does now detect my phone. However, it always gets stuck at "Setup Connection" when I try to flash the stock rom or CWMR. Tried different approaches (from starting DL-mode with the phone being connected to my PC to separately starting DL mode and then connecting, starting it up with the battery already being in place, starting it up with sliding the battery in place while holding the 3 buttons etc.), none of them gets me further so far.
Another hint I found was setting the Baud-rate of the Samsung mobile modem to 203400, but this, unfortunately, didnt change anything.
Anyone got a lead on how to get Odin finally started properly?
Click to expand...
Click to collapse
download mode is Vol - / Central Button / Power..
Im aware of that. However, Vol- + Menu + Power is the only key combination that the phone will react upon.
Anyway. Brought it to a mobile phone shop on friday, called them on monday and according to them, the phone should be fixed by tomorrow, wednesday. Seems like ROM manager has done damage that cant be undone without knowing how to handle a JTAG device. But at least its not completely broken. Learning that will cost me 25 Euros, though.
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Rigardi said:
One final update to this: Got the phone back today, they were indeed able to fix it.
Conclusion:
While installing a non-fitting CWM-Recovery through ROM Manager will make your Galaxy 5 unfixable via Odin, it still can be saved by making proper use of a JTAG.
Click to expand...
Click to collapse
... for only 25 €!!!
{ brvsn ~ CM7 on GT-I5500 ~ Tapatalk }
Alright guys. I hardly post on here because I know many questions have been answered. I searched and was unlucky.
I had my phone rooted last year, but went completely back to stock because I was tired of the battery drain. Recently, maybe a month or 2 ago? I updated to 4.0.4. That's when my power button stopped working. All of a sudden, about a week after, it started working again. So I was happy. A week ago, it stopped again. Using my phone everyday, it got really frustrating. I was dumb and didn't search for a fix, which I later found a temporary fix.
So I decided to root again. Well, when I plug my phone into my laptop, it tells me "USB device not recognized" so I looked for a way to root using mobile. Found a few videos on YouTube with links with an .apk and did it that way. I had CWM backed up in Titanium Backup, so I restored it and opened it. I wanted to flash a ROM on my phone, but I didn't think before I went into CWM. Stupid, I know lol.
Now I'm stuck in CWM, without a working power button. I tried taking the battery out, and putting it back in. It still boots into CWM. I tried taking the battery out, plugging in my phone, and putting the battery back in, and still CWM. I've also tried taking the battery out and leaving it out for a while then putting it back in. And also, taking the battery out and leaving it out for a while, plugging in my phone, then putting the battery back in. Still in CWM. I've also tried hitting the Home button (does nothing). Nothing happens when I hit the Search or Back buttons either. I hit the Menu button, and it hides the menu, then I hit it again and the menu comes back.
Luckily, I'm due for an upgrade next month so recently I've been using my super old "Krzr" flip phone. I miss having a Smartphone though!
Any help would be appreciated!! Please don't flame me lol
118 views, any suggestions??
Why don't you try repairing the power key. I strongly believe It may be a hardware problem
Sent from my SGH-I777 using xda premium
If you have USB debugging enabled you could connect through ADB and force a standard restart.
If that's not an option and you can't get out of recovery (Had a very similar issue with my wife's phone when her power button went) you can use an odin 1 click downloader to revert it to stock and it will then restart normally. I then used the odin 1 click downloader to install a rooted stock rom. After that I took a touch enabled kernel (like Siyah) and installed that through Android Terminal emulator. Now you can boot into CWM and be able to use the touch screen to navigate. It's a pain and it requires a full wife and reversion to stock but it does work. Then you flash a rom that allows for holding the volume down to wake the screen or a kernel like AJK that allows for swiping across the screen to wake the phone.
I'm sure your power button failed so as the previous poster suggested you can look into getting it repaired. I don't have the link on me but there was a place listed here on the forums before that were like $40 to do the hardware replacement.
duttysrez said:
Why don't you try repairing the power key. I strongly believe It may be a hardware problem
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
KeiranSolaris said:
If you have USB debugging enabled you could connect through ADB and force a standard restart.
If that's not an option and you can't get out of recovery (Had a very similar issue with my wife's phone when her power button went) you can use an odin 1 click downloader to revert it to stock and it will then restart normally. I then used the odin 1 click downloader to install a rooted stock rom. After that I took a touch enabled kernel (like Siyah) and installed that through Android Terminal emulator. Now you can boot into CWM and be able to use the touch screen to navigate. It's a pain and it requires a full wife and reversion to stock but it does work. Then you flash a rom that allows for holding the volume down to wake the screen or a kernel like AJK that allows for swiping across the screen to wake the phone.
I'm sure your power button failed so as the previous poster suggested you can look into getting it repaired. I don't have the link on me but there was a place listed here on the forums before that were like $40 to do the hardware replacement.
Click to expand...
Click to collapse
Thanks for the info. Late last night I pressed the power button while "reboot" was highlighted in CWM and it finally worked. But it only worked that once, at least it got me out of CWM. My phone reboots a LOT. At one point, it rebooted at least 3 times in a row; getting to the AT&T screen and rebooting then.
I've decided to just deal with it lol I'm probably going to see if AT&T can kindly let me upgrade this week instead of waiting until June 1st.
Again, I appreciate the info!!
Do a clean flash
Ok since you are saying your phone's power button started being flaky after a ROM flash, I'm thinking most likely it is not a hardware issue.
Bad flashes, loading different bootloaders, or kernel flashes and then panics happen for various reasons.
You need a clean flash, reset to factory (erase data/cache multiple times) and reboot.
Back up first (like right now), then gather your operation tools.
1-Download I777 usb drivers from Samsung itself, uninstall the current ones, and install the new drivers (Do this plz)
2-Download the stock ROM from [INDEX]AT&T I777 GSll {Root/ROM's/Tools} thread by t3chn0s1s in AT&T Samsung Galaxy S II Android Development (http://forum.xda-developers.com/showthread.php?t=1301682)
3-from that thread get: A) Odin B) UCLE5 ROM
4-Run Odin and try connecting your phone to see if it stays in the Download mode successfully (phone off, Odin loaded on your PC, plug in your phone to your PC while holding down both volume keys, release the keys once your COM connection port lights up) sometime holding down the volume down only button works instead of both depending on what you flashed before.
5-load up the stock .tar UCLE5 file in the PDA section, leave all the Odin default check marks on and add the flash bootloaders check mark too(DO NOT check the repartition option)
6- once a clean flash finally happened (doesn't matter if the phones boots up all the way or not yet) pull the battery, and get to recovery and reset / factory reset and let the newly flashed ROM boot up
7-let it settle for 10-15 minutes and then reboot it.
Good luck,
I727-CM10.1
alright guys, so here's the story. just yesterday i bought a brand new lg v10, got it home and the first thing i did was root the device and used ADB to load TWRP following the instructions here on SDA to a T for the ROOT/RECOVERY setup. and it worked. all was fine and dandy, the first time i booted into TWRP via ADB after root i got in, flashed a debloated ROM + xposed and again, everything went fine.. loaded into the OS of the new ROM, went through setup, turned on USB debugging, clicked always allow this computer, installed xposed app yadayadayada. I then, using ADB again, loaded into TWRP. i created a backup there just in case something went wrong with the changes i was about to make and once the backup was complete i loaded back in to the OS. at this point i thought i had done everything right and was confident that if i made system changes that didn't work out i could just flash the phone with TWRP from the backup i made. right? WRONG! ...apparently... so anyways, i made my first change, which was to use a NONROOT app called texdroider or whatever to change my DPI (as i have done with a couple phones previously without much issue) but i didn't take into account that stupid second screen... making the DPI changes system wide, as i'm sure those of you that know this phone are aware, causes the systemUI to crash with an error.. making the OS unusable.. so i tried to load into TWRP by holding the volume down and power button.. but instead it just booted me to the factory recovery.. not TWRP... the phone is unusable within the OS, i can't get the phone to connect to adb to boot into twrp as i had previously, i can't seem to get the phone into download mode, and i can't boot to TWRP and the OS is junk at this point.. but it DOES say on the "LG" screen that the bootloader is unlocked so i'm really hoping i'm not completely out of luck.. but i am not sure what to do at this point. does anyone here know of anything i can try to get into a custom recovery at this point? if i could get into TWRP my SD card in the phone has a backup, the original image, not to mention i could pull the SD card and add anything i need via my pc and then boot back to twrp etc etc and i would have no issue fixing the phone... i really don't understand what i did wrong or why i can't boot to my custom recovery but i'm at a loss.. i'm just looking for a way to force the phone into a custom recovery... or restore the original factory image.. if you have any advice at all i would really appreciate it.
Thanks for reading
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
ngoblirsch said:
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
Click to expand...
Click to collapse
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
Click to expand...
Click to collapse
it was a screen asking me to do a factory reset, i click yes, it asks to confirm, i click yes again and then it "successfully" factory resets my phone... it shows the android factory reset symbol that its resetting, then says that its "optimizing apps" and goes through that whole process.. but when it finally loads the "welcome" screen (so i know for a fact that some sort reset has taken place) i get the same "systemui has crashed" error and the OS is unusable and won't connect to my computer.. idk why i can't access TWRP.. i booted to it 3 times before this happened, though never by the hardware buttons on the phone.. everytime i booted to TWRP i had used ADB to boot to TWRP.. what makes me the most sad is that i have a nandroid backup on my SD card... but i can't flash it without recovery.. which i can't install on the phone without getting into the OS..
is there any way to install TWRP or even boot to a temporary TWRP so that i can do so? if i can flash my nandroid i'm saved.. if i can get into a custom recovery i'm saved.. if i can find a .kdz file to flash, i'm saved... if i can get my phone to be recognized by my computer/adb i'm saved.... there simply has to be a way to unbrick this phone...
ZDeuce2 said:
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
well i seem to have somehow NOT installed TWRP correctly because it just proceeds to factory reset my phone.. which for some odd reason doesn't reset the DPI... leaving me stranded... is there any way to get ADB to see my device in its present state? my computer makes the device recognition noise when i enter download mode and i can see it in device manager but not my computer or ADB
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
YrrchSebor said:
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
Click to expand...
Click to collapse
dude.. then what good is a factory reset?!? like seriously... and yeah, i tried that but i can't get adb to connect in download mode.. the device doesn't show up when I type "adb devices" like it did when i first rooted it. ... and i thought i followed the instructions exactly as it was laid out from this link.
http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
i think somewhere in there i must have missed something and ended up only booting into twrp temporarily.. which is certainly possible since i never boot to twrp during that initial process from the hardware keys or soft keys.. always through adb.. the phone was already plugged in.. typing the command was a couple keys away..
is there anyway to get TWRP on to the phone now? or am i screwed :'(
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
YrrchSebor said:
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
Click to expand...
Click to collapse
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
ZDeuce2 said:
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
@ngoblirsch Along with the information provided in these suggestions and what you have said, you need to reinstall your LG/fastboot drivers on your PC while in fastboot mode
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
Well I appreciate the encouragement, it sure seems to have helped! Issue has been resolved. ended up that i just didn't know the hardware key combination to get to the bootloader/fastboot mode without being already connected to adb. nothing that i could find online said to hold volume down while plugging it in to a computer. as soon as i was able to do so i connected to adb and it was a breeze from there; I am now back with an OS AND a customer recovery properly installed on the device!! I will be hanging around these forums for as long as i have this phone so i'm sure i'll bump into you guys! absolutely love the community here on XDA, you guys are freaking awesome!!
ngoblirsch said:
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
Click to expand...
Click to collapse
Glad you got it fixed, and welcome to the V10 device and forums!