I like the actual dialer itself, the buttons are nice and big and easy to hit, but there are a few things about it i wish were a bit more intuitive. For one, i believe on my old phone, when you start punching letters/numbers it would tend to pull up the most expected result...so if you call a number a lot that would be above say someone you don't ever call. but this doesn't do that so i am constantly seeing the same random contact at the top when i punch the first FOUR digits for one of my top dials. Which brings my next point, i don't like that you only get one choice to start, my old phone i could see like 4 or so contacts then touch the one in the list from there. on this dialer, i always have to hit the thin bar where it tell how many matches you have, and it's easy to miss that with your finger. I also wish that when you come into the dialer it listed more than just your last single connection.
I may try out something else, any suggestions?
Dillsnik said:
I like the actual dialer itself, the buttons are nice and big and easy to hit, but there are a few things about it i wish were a bit more intuitive. For one, i believe on my old phone, when you start punching letters/numbers it would tend to pull up the most expected result...so if you call a number a lot that would be above say someone you don't ever call. but this doesn't do that so i am constantly seeing the same random contact at the top when i punch the first FOUR digits for one of my top dials. Which brings my next point, i don't like that you only get one choice to start, my old phone i could see like 4 or so contacts then touch the one in the list from there. on this dialer, i always have to hit the thin bar where it tell how many matches you have, and it's easy to miss that with your finger. I also wish that when you come into the dialer it listed more than just your last single connection.
I may try out something else, any suggestions?
Click to expand...
Click to collapse
Try typing the digits that correspond with the first few letters in the name of the person you are trying to call
That is what I am doing now
Dillsnik said:
I like the actual dialer itself, the buttons are nice and big and easy to hit, but there are a few things about it i wish were a bit more intuitive. For one, i believe on my old phone, when you start punching letters/numbers it would tend to pull up the most expected result...so if you call a number a lot that would be above say someone you don't ever call. but this doesn't do that so i am constantly seeing the same random contact at the top when i punch the first FOUR digits for one of my top dials. Which brings my next point, i don't like that you only get one choice to start, my old phone i could see like 4 or so contacts then touch the one in the list from there. on this dialer, i always have to hit the thin bar where it tell how many matches you have, and it's easy to miss that with your finger. I also wish that when you come into the dialer it listed more than just your last single connection.
I may try out something else, any suggestions?
Click to expand...
Click to collapse
I hate the stock dialer bc it ONLY shows ONE name/number when you start dialing. I'm used to seeing at least 4 names/numbers on that screen. I use GO Dialer instead. It's an ugly shade of blue, but the keypad is transparent translucent, and also goes away when you scroll the list of names/numbers.
I like the stock dialer
I looked at some alternatives but I like the stock one better.
The only gripe I have with the stock dialer is that I can't get it to work in landscape mode. Any one out there know how to get it to rotate automatically. I can't find any settings for it to make it rotate.
the only dialer that i consider very good is the one from MIUI
everything else doesnt compare in my book
Go Dialer is pretty good. First one I actually find acceptable. All of the "Go Dev" apps are quite good, and updated constantly. Plus they actually tell you what they updated, and on what date.
SpeeDemon said:
Go Dialer is pretty good. First one I actually find acceptable. All of the "Go Dev" apps are quite good, and updated constantly. Plus they actually tell you what they updated, and on what date.
Click to expand...
Click to collapse
I found Go contact right b4 I saw your post too lol
I was going to come here and update this thread
but yea
Go contact + sms + launcher has been awesome
I can't use the stock dialer cause I changed my LCD density (210) and that breaks the stock dialer. Was trying to get used to go dialer but it doesn't transfer numbers from Google maps, ie if I do a search on maps and click the dial button, go dialer comes up blank. That alone was a dealbreaker for me. I use dialer one, very functional, fast, and looks like stock. I also was not a fan of the weird blue shade of go dialer.
joeryu said:
I can't use the stock dialer cause I changed my LCD density (210) and that breaks the stock dialer. Was trying to get used to go dialer but it doesn't transfer numbers from Google maps, ie if I do a search on maps and click the dial button, go dialer comes up blank. That alone was a dealbreaker for me. I use dialer one, very functional, fast, and looks like stock. I also was not a fan of the weird blue shade of go dialer.
Click to expand...
Click to collapse
Newest update is supposed to fix the numbers from other apps thing in Go Contacts.
Diviance said:
Newest update is supposed to fix the numbers from other apps thing in Go Contacts.
Click to expand...
Click to collapse
nope
didnt fix it
uninstalled
I don't mind the stock dialer, I only mind that the stock contacts app doesn't allow you to filter your contacts at least to phone only on the bell version. the contacts tab does that for you (for obvious reasons) but it makes the contacts app useless to me as it shows everyone I have emailed on gmail as a contact.
I use dialer one. Its very good and similar to sense dialer
Sent from my MB860 using XDA App
i was about to post a thread looking for some dialer and contacts app. i gave up on the stock one, so not intuitive. my last phone was windows mobile, and the way you find contacts using the dialer is so much better than the stock android. so i tried Go Dialer and Dialer One as suggested here to test both. any more options out there is appreciated
Related
Ok, Everybody heres a finished (to my comfort) dialer that as far as i can see works properly.
I'll say its working at 99.999 percent and as with all the other canvases, landscape is not perfect.
its primarily for manila 2.5 but can work with 2.1, its 2G so no video calling but does have conference and works preaty smooth.
just quit cprog (and phcanvga.exe if you have it), install and then soft reset.
Cab pyrorob_gullum_Phone_Canvas_Enhancement_2G_4_2_V2.cab
Package: pyrorob_gullum_Phone_Canvas_Enhancement_2G_4_2_V2.rar
for those with the energy rom, heres a theme to match: pyrorob PhoneCanvas 4.2 EnergyRom Theme.cab install after the main install, soft reset.
So, i do want to thank everyone here and those who donate there time with this. I really appreciate this and am thankful for everyones help.
short statement:
we are a community of people helping each other to better our devices and only a tiny fraction of all the users contribute.
its great when it happens and no one should expect accolades or payment for there creativity.
(dont get me started on people who will only release things on this site until they get paid, i think it stifles the advancement of the community as a whole).
Now, i do want to specifically thank amarullz, whose phcanvga.exe im using, which without it, would have seriously hampered this and gullum who has been absolutely helpful and all the testers.
Phone Canvases in testing:
pyrorob Phone_Canvas_Enhancement_2G_3_0_1916_3532_2_ERom_Theme.cab
manila 2.1 compatible,no curtain, energyrom theme and confrence calling
pyrorob PhoneCanvas_4_3_35776_01.cab
manila 2.1 compatible,no curtain, confrence calling,AT&T video share and AT&T ptt (push to talk).
Hi Pyrorob, Im sure many people here are like me and read your posts, use your fixes, but dont know how to mod dialers and whatnot, so cant really offer help or suggestions with the things you are asking. It doesnt mean your efforst aren't appreciated though!
Regarding your dialer, it would be helpful if you posted a screenshot so we know what we're getting. And also some confirmations that we can uninstall the cab and it will restore our previous dialer without any issues etc. It probably also pays to mention not to use SKTools as you said in the EnergyROM thread it can totally delete the phone canvas and you wont be able to get back the one prior to install
Out of interest just how DO you do something like this anyway? Im a computer programmer but dont know anything about working on the phones. Like what language is the dialer written in? Do you have access to the code and can make changes that way, or are you just trying to resize images and hex edit things inside resource files or exe/dlls etc (eg x and y offsets)?
Thanks pyrorob, I'll give it a whirl, and I'll be sure and post if I have any thoughts.
Okay, so I can't get it to install. Says "Installation was unsuccessful. The program or settign cannot be installed because it does not have sufficient system permissions." I used dotfred's taskmanager to kill cprog, and put the phone into airplane mode. Any ideas?
Cyfun said:
Okay, so I can't get it to install. Says "Installation was unsuccessful. The program or settign cannot be installed because it does not have sufficient system permissions." I used dotfred's taskmanager to kill cprog, and put the phone into airplane mode. Any ideas?
Click to expand...
Click to collapse
Also kill phcanvga.exe.
scarecrow420 said:
Hi Pyrorob, Im sure many people here are like me and read your posts, use your fixes, but dont know how to mod dialers and whatnot, so cant really offer help or suggestions with the things you are asking. It doesnt mean your efforst aren't appreciated though!
Regarding your dialer, it would be helpful if you posted a screenshot so we know what we're getting. And also some confirmations that we can uninstall the cab and it will restore our previous dialer without any issues etc. It probably also pays to mention not to use SKTools as you said in the EnergyROM thread it can totally delete the phone canvas and you wont be able to get back the one prior to install
Out of interest just how DO you do something like this anyway? Im a computer programmer but dont know anything about working on the phones. Like what language is the dialer written in? Do you have access to the code and can make changes that way, or are you just trying to resize images and hex edit things inside resource files or exe/dlls etc (eg x and y offsets)?
Click to expand...
Click to collapse
yes, i understand that, the only thing is, i didn't just open a thread and waited, i sent out a bunch of pm's to different people that i know knew the specifics of what to do and how to do it right and no one even had the decency to even reply. its like people think of this as some sort of competition..
yeah if you just follow the same steps to uninstall as you did to install then youll be fine. basically the dll's for the canvas have a bunch of positioning resources and thru lots of trial and error i managed to get things to where they are now.
I checked out your canvas on my Touch Pro.
The only think I noticed (except of the back button on the top right corner you mentioned) is that the left soft button "All People" does not work for me.
When I press it it changes from "All People" to "Contacts" and Manila crashes in the Background.
Any hints?
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
P.S.
One more thing. If you're in landscape already say writint a text message, then press the call button to bring up the dialer, the screen goes into portrait mode with the dialer while it should be in landscape. Then you have to close the hardware keyboard, reopen, now dialer is in landscape.
Bluetooth Volume???
Can anyone test this dialer with their bluetooth device? I dont have one handy right now. Just to make a call, try to adjust the volume up/down using the 2 hardkeys on the side of the phone to see if it works? I know on the rhodium dialer it doesnt change the actual volume on the headset, just shows on the volume volume is changing but does nothing. Hope its not the case with this dialer or can be fixed if it is? Thanks
deeznuts said:
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
P.S.
One more thing. If you're in landscape already say writint a text message, then press the call button to bring up the dialer, the screen goes into portrait mode with the dialer while it should be in landscape. Then you have to close the hardware keyboard, reopen, now dialer is in landscape.
Click to expand...
Click to collapse
deeznuts said:
Can anyone test this dialer with their bluetooth device? I dont have one handy right now. Just to make a call, try to adjust the volume up/down using the 2 hardkeys on the side of the phone to see if it works? I know on the rhodium dialer it doesnt change the actual volume on the headset, just shows on the volume volume is changing but does nothing. Hope its not the case with this dialer or can be fixed if it is? Thanks
Click to expand...
Click to collapse
ok first one, the all people soft key, im testing the dialer on a phone with manila 2.5 and when you hit that key it goes into the manila contacts, the dialer originally is from a manila 2.5 leo rom so it might only work 100% with a manila 2.5 rom..
the top taksbar has to do with the repositioning by the phcanvga if it doent move up the incall screen and cut off the top then the buttons at the bottom will be cut. sometimes the phcanvga doesn't reposition properly at first so you can do a few things like switch to landscape and back, goto contacts and back or close and reopen it and it will reposition itself.
yeah and it going back to portrait? well as far as i know there isnt a whole lot of landscape support with the leo since it doesn't have a hard keyboard so i guess thats the way htc programed this?..
second one, try putting in this reg key:
[HKEY_CURRENT_USER\ControlPanel\Volume]
"EnableAdjustHSVolume"=dword:00000001
see if that works
Apart from the 'back' key issue noted, no problems on my current ROM build. Have installed, unistalled and reinstalled without issue following Pyrorob's instructions. Conference calling working well (my mates like being part of the beta test!). Great job and Thanks!
pyrorob said:
ok first one, the all people soft key, im testing the dialer on a phone with manila 2.5 and when you hit that key it goes into the manila contacts, the dialer originally is from a manila 2.5 leo rom so it might only work 100% with a manila 2.5 rom..
the top taksbar has to do with the repositioning by the phcanvga if it doent move up the incall screen and cut off the top then the buttons at the bottom will be cut. sometimes the phcanvga doesn't reposition properly at first so you can do a few things like switch to landscape and back, goto contacts and back or close and reopen it and it will reposition itself.
yeah and it going back to portrait? well as far as i know there isnt a whole lot of landscape support with the leo since it doesn't have a hard keyboard so i guess thats the way htc programed this?..
second one, try putting in this reg key:
[HKEY_CURRENT_USER\ControlPanel\Volume]
"EnableAdjustHSVolume"=dword:00000001
see if that works
Click to expand...
Click to collapse
Oh i see, didnt know it was from a 2.5 version. That makes sense then. You think you can make a version to work with 2.1 manila though? I have no idea how hard that would be, just talking about getting the left softkey going for 2.1 manila. Ill have my jawbone 3 later today. Ill try it out of the box first to see if it works with the volume hardkeys on the phone, if that doesnt work then ill plug in the reg edit you provided. Still, this is the fastest port for a very nice vga dialer for our phones, WOW! Cant believe it took them forever to port tachi dialer and took u a few days and this one is wayyyyy better then tachi! Great work and would happily donate to you or wherever you would like me too for this and all your great work pyrorob, thank you!!!
Umm
Well out of the box the headset volume cannot be changed by the device with this dialer. I looked in the registry using the regular reg edit app thats cooked into nrg's rom and also tried using the one that came with sktools (which is more friendly i think!), neither have that entry.
I go to current user, control panel, volume, only entries here are all one worded, nothing like what you described and nothing with a standard setting of 0000001 or anything like that. Ill get a screen shot for u if that helps but looking in the reg i cant find it. Do i need to "add" the reg entry u described since its not there? If i do, how do i add it? Never done that before.
So far the only bug that I have found appart from the already mention ones, is a sliding bar on the right corner of the dialer when I open it up. The only way that i have found to make it disapear its by fliping the phone so the dialer goes to landscape and fliping it back to portrait and no more silder bar, and by closing the dialer with the end button instead of the x. Appart from that is working really great, so far no connecting delays ussing slide 2 answer. I'll be using it a couple of days more to test it out to see if anything else pops up. Hell, i like it so much i'll keep it until a new flash or a update from you pyrorob.
I think the only thing that needs its the energy theme.
Geat job man!
This dialer is like a God send to us, its soo good! Tested out the slide to answer/ignore and works flawless, no lag or sticking like rhodium! This is like an upgraded rhodium dialer for US users who dont have video call, its great. Love how theres no annoying bluetooth icon on the taskbar either when bluetooth is enabled with this dialer, huge plus for me! Hate having useless icons on the taskbar. Duh i know bluetooth is on cus i turned it on, why do i need an icon up there to remind me? If u can just make some finishing touches, skin the hell out of it to match energy rom, Golden, seriously golden here!!!
kmpoboy2 said:
So far the only bug that I have found appart from the already mention ones, is a sliding bar on the right corner of the dialer when I open it up. The only way that i have found to make it disapear its by fliping the phone so the dialer goes to landscape and fliping it back to portrait and no more silder bar, and by closing the dialer with the end button instead of the x. Appart from that is working really great, so far no connecting delays ussing slide 2 answer. I'll be using it a couple of days more to test it out to see if anything else pops up. Hell, i like it so much i'll keep it until a new flash or a update from you pyrorob.
I think the only thing that needs its the energy theme.
Geat job man!
Click to expand...
Click to collapse
What sliding bar is this? Are you talking about the top right corner wheres theres a grey box with a black arrow distorted pointing left? Thats the back button which would be nice if it can be skinned good or resized (looks fine in landscape as well as everything else, just not so much when receiving a call but no biggie!). Other then that, i have no idea what you're talking about? Can u provide a screen shot maybe?
deeznuts said:
What sliding bar is this? Are you talking about the top right corner wheres theres a grey box with a black arrow distorted pointing left? Thats the back button which would be nice if it can be skinned good or resized (looks fine in landscape as well as everything else, just not so much when receiving a call but no biggie!). Other then that, i have no idea what you're talking about? Can u provide a screen shot maybe?
Click to expand...
Click to collapse
No man, i know the back button, it's not that. It a sliding up/down bar, the one that appears whe you flip it to landscape. It appears when i close the dialer pressing the x button and open it up again with the send button and if i flip it to landscape when flip back to portrait the bar stays, have to flip it back to make it go away. Sory can't post screen shots I'm at work, plus don't know how to take a screen shot from the phone.
I am convinced that the dialer is pooched on our phone. So I downloaded a replacement dialer from the market, but found that it cannot replace the phones dialer. I went into the dialers settings and do go for getting it to clear defaults root or not. So I am going to in list help to try and kill the phones dialer and replace it with another dialer be it one from the matrix or one from another phone, but I am really locking everything down to the dialer.
UPDATE: Not entirely convinced it is the dialer anymore.
I was downloading extra stuff for an app(game) with WIFI on. I did not send/receive txt or calls. once the download was done I turned WIFI off and noticed a few min later that 3G never picked up. Tried to make a call and the dialer sit at connecting but never dialed out. I had 4 bars for signal not 3G icon and the bars were grey. Could not end the call via end call button as the dialer seems to have locked up. hit the home button and the notification bar at the top flashed green. pull down notification bar and tried to click on the dialer and nothing just closes the note bar. go into setting/applications and tried to FC the dialer and no go it stayed open. Then FC'd dialer storage and the dialer died, then radio bars dropped totally and had an x in them with the lock screen saying "no service". airplane mode would stay a transparent blue and never actually complete. Had to reboot phone to get 3G/voice back.
So has no-one else seen this. And BTW this has been happening since day one, and on all updates including the 198_6. And no no other apps are installed when I have seen this and it happens almost 100% of the time but before I thought it was only leaving the wifi are that did it.
bump, new stuff, see OP. I am really trying to see if this is just my phone or other peoples phones as well.
I had go dialer installed with no problems, but I love the stock dialer so I scrapped it. Worked fine though.
Sent from my MoPho using the XDA Premium app
21productionz said:
I had go dialer installed with no problems, but I love the stock dialer so I scrapped it. Worked fine though.
Sent from my MoPho using the XDA Premium app
Click to expand...
Click to collapse
That was one I installed, but I could never make it the default dialer. Was it set as your default dialer? meaning when the phone rang Go dialer opened and not the built in dialer? because mine would always be the default dialer.
Overall, I think the move from Blackberry to Android/Note was the right one but the transition has been painful in a few areas. I'll list them in this one post instead of inundating the forums with single posts with only one question.
Phone Application -
Admittedly, this is the most frustrating part about going with the Note (outside of the loss of a physical keyboard). The phone application is ridiculously inefficient compared to Blackberry.
Is there a way to prevent the phone from locking (PIN required) when I navigate away from the phone application while on a call? There is nothing more frustrating than having to enter my PIN to simply hang up a phone call. Also, while on a phone call only (meaning I don't navigate away from phone), the screen times out and turns off... forcing me to press the side key to get back into phone. Is there a program that can map the capacitive search key while on a phone call so I can hang up a call?
Regarding "Contacts", is there a way to default to keyboard entry upon opening Contacts? Does Android think the average person has only 6 contacts??... Because that's how many contacts show up when you enter Contacts. This forces me to press "search contacts" every single time I enter Contacts... and the magnifying glass is all the way at the tip top of the screen. Using one hand, it's impossible to comfortably extend my thumb all the way to the top of the screen after pressing my Contacts application icon on the very bottom of the screen. Then I am forced to pull all the way back down to the keyboard just to enter the first letter of the person I'm searching for! I call out of my Contacts list 50-100 times a day so this gets very, very cumbersome and time consuming.
Is there a way to change the text size in my contacts list? I'd like to see more than 6 contacts per page... the phone screen is HUGE!
Now this complaint I'm sure a lot of ex Blackberry people can relate with... Blackberry (via an available OPTION) would consolidate call logs into each individual contact. Android, for some strange reason, does not consolidate history to each individual contact. So when I pull up recent history, the top 100 entries can be from only 10 or 15 people Wouldn't it make more sense to have ONE entry PER CONTACT? I wouldn't have to go into Contacts as often if Android actually consolidated phone call logs into one log per contact because I could go into the phone log and call out people from there... instead of seeing a sea of missed, outgoing, incoming calls... from the same person. I really hope there is a way to consolidate these logs.
S Memo -
There is an option to pull up the S Memo pad in phone but for some strange reason, it always defaults to "drawing" mode instead of entering text. I'm often in a flustered state when on a phone call and/or listening to voicemail and trying to jot down notes... so having to punch that tiny little "T" at the very upper left hand corner of the screen is a pain.
Is there a way to decrease the font size? I never did understand why some native programs have no adjustments for font size... not everyone is 80 years old w/bad vision. I mean... what's the point of having such a high res screen if the font size is a quarter inch tall? Blackberry allowed text size to be adjusted in ALL native applications.
I'm assuming there is no way to increase the amount of text I can enter onto one S Memo page? It seems extremely limited (about ~100 words max).
Am I the only one that seems to have notes that don't save? I recall entering text into several notes and backing out supposedly automatically saves what was inputed... but often times the text is not there when I return to the note. Are others having this issue?
Finally, is there an alternative memo program that anyone could recommend that is as simple and easy to search as Blackberry's memopad?
Alarm Clock -
I realize that there are a ton of alarm apps out there but I've heard horror stories about apps that crash and/or don't work properly. I need a reliable alarm clock so would prefer to stick with the native application. It actually works perfectly... except that the alarm lasts for only 60 seconds. I've slept right through the alarm several times already. Is there any way to make it loop for a longer period? Say 5 or 10 minutes?
I have a ton of other questions but if anyone can help with these for now it would be much appreciated!
U have a button dedicated to search at the bottom. I use dw contacts. Not the cheapest solution but very customizable
There's an app to increase/decrease font size, I haven't used it but I saw someone mentioning it here the other day, the alarm is fine, I have never had any issues with any android alarm, and you can add as many alarms as you want, I get up at 3am to go to work and I can't ever be late so I have set like 4 alarms to go off in set times in order so if I don't hear one the others will follow.
As the issue with being able to reach the full length of the screen one handed , it is what it is, a big a$$ screen that for the most part demands two handed control.
Sent from my awesome Galaxy Note!
Do you have to use a PIN?
Go to settings, display, screen timeout. You can change how quickly or slowly your screen times out on you.
On your contacts app, just hit the magnifying glass at the bottom right and it'll pull up your keyboard and search function. Or there's teh alphabet running down the right hand side, just click on the letter the name starts with. Or for more customization and ease, install exdialer. It looks good, easy to use, font is small, etc. Exdialer also consolidates your call logs.
There are a ton of memo apps in the market. Personally I love Gnotes. It syncs with google, saves everything, is easy to use, and you can inbed pics, etc.
I don't know about the spen. So far I've only used it to make cute pics to send to my wife and to draw up soccer drills and practice plans.
esincho said:
U have a button dedicated to search at the bottom. I use dw contacts. Not the cheapest solution but very customizable
Click to expand...
Click to collapse
Thanks. I'll give it a try. Does the phone still maintain its ability to keep a log and back up the calls to my computer?
roloracer said:
There's an app to increase/decrease font size, I haven't used it but I saw someone mentioning it here the other day, the alarm is fine, I have never had any issues with any android alarm, and you can add as many alarms as you want, I get up at 3am to go to work and I can't ever be late so I have set like 4 alarms to go off in set times in order so if I don't hear one the others will follow.
As the issue with being able to reach the full length of the screen one handed , it is what it is, a big a$$ screen that for the most part demands two handed control.
Sent from my awesome Galaxy Note!
Click to expand...
Click to collapse
I tried the program Big Font but unfortunately while the font size decreases, it does nothing to decrease the size of the useless silhouette image next to the contact name. So I still only get 6 contacts per massive page. I'm hoping there is another solution.
kiltedthrower said:
Do you have to use a PIN?
Go to settings, display, screen timeout. You can change how quickly or slowly your screen times out on you.
On your contacts app, just hit the magnifying glass at the bottom right and it'll pull up your keyboard and search function. Or there's teh alphabet running down the right hand side, just click on the letter the name starts with. Or for more customization and ease, install exdialer. It looks good, easy to use, font is small, etc. Exdialer also consolidates your call logs.
There are a ton of memo apps in the market. Personally I love Gnotes. It syncs with google, saves everything, is easy to use, and you can inbed pics, etc.
I don't know about the spen. So far I've only used it to make cute pics to send to my wife and to draw up soccer drills and practice plans.
Click to expand...
Click to collapse
Yes, unfortunately I do need to use a PIN or some other form of security. I just don't think it makes any sense to require a PIN if I already entered one and then make a phone call. It's just silly that Android would require a PIN if you're clearly using the phone (on a call). Apparently Google thinks that using the phone does not include being on a phone call. Absurd.
As for your advice about using the magnifying glass, it doesn't work. Because if you pull up the contact via the magnifying glass, you cannot dial from it (swipe right for dial, left for text like you would if you clicked the text box at the top of the phone). You have to click on it and then click once again on what you would like to do. Not sure why it's like that but there are a lot of Android "features" that leave me scratching my head.
I'll give Gnote a try. Thanks!
pj737 said:
I tried the program Big Font but unfortunately while the font size decreases, it does nothing to decrease the size of the useless silhouette image next to the contact name. So I still only get 6 contacts per massive page. I'm hoping there is another solution.
Click to expand...
Click to collapse
Please don't mix up Google and Samsung. You see Samsung customizes the Android OS, and the stock contacts app is different than the stock Google one. Everything you see is what Samsung did not Google.
If you don't like it I suggest you switch phones or you try third-party apps like exdialer(excontacts comes with it), and it is a very popular choice people use as an alternative. Also, I if you have rooted your phone you can change the DPI, so everything will be smaller and more things can fit on the screen, but like I said you will need ROOT. Download a DPI changer app and go for 240dpi.
Sent from my GT-i9220 using Tapatalk
Or if you're brave enough you can always change the lcd density in the build.prop but beware if you make a mistake editing It will brake the rom and unless you have it backed up like in cwm you'll be forced to flash it to bring it back to life.
Sent from my awesome Galaxy Note!
roloracer said:
Or if you're brave enough you can always change the lcd density in the build.prop but beware if you make a mistake editing It will brake the rom and unless you have it backed up like in cwm you'll be forced to flash it to bring it back to life.
Sent from my awesome Galaxy Note!
Click to expand...
Click to collapse
Just use LCD resolution from the market. Much simpler for a novice
Hey guys, I am a long time iPhone user and I got a Black HTC one a few weeks ago and for the main part, I am LOVE the change and really love SENSE 5. I have messed around with the Apex Locker and some awesome UI's but would miss blink feed and some other SENSE issues.
I do have a lot of smaller issues I am hoping to figure out (which may not be a big deal to some people). I was told to come on here and poke around and ask questions for some answers.
Email:
I LOVE the stock/native email APP and cannot use GMAIL for business; however many emails do not shrink to fit the window like the GMAIL app or on my iPhone. I am really hoping we can figure this out
Google Voice:
Works amazing with google products and Google now but I am having an issue integrating it with HTC apps or other 3rd party apps.
Home/Back Buttons:
As many now these do not light up until in a really dark room. I use my phone a lot at home with the lights dimmed while watching TV and they still do not come on.
Lock Screen:
The Lock screen requires a swipe up to answer calls, which happens a lot when I pull the phone out of my pocket (even with the stock locker and accessability turned off). I think I would like a different way (sideways) to answer a call and unlock the phone.
Bloatware/Stock apps:
There are a lot of ATT apps I do not want on the phone and do not want to use, but all of the HTC apps I do want for the most part
So.....You pretty much have a problem with every single function of the phone.
Google voice, don't know don't use it.
Email, don't know don't use it
Home back buttons, what do you need them lit up for? You'll learn where they are.
Lock screen, not gonna happen with stock lock screen. Use a different locker or flash a Rom.
Bloatware, unlock bootloader, s-off, recovery and root.
This is also in the wrong section.
Sent from my HTC One using Tapatalk 4
pameister said:
Hey guys, I am a long time iPhone user and I got a Black HTC one a few weeks ago and for the main part, I am LOVE the change and really love SENSE 5. I have messed around with the Apex Locker and some awesome UI's but would miss blink feed and some other SENSE issues.
I do have a lot of smaller issues I am hoping to figure out (which may not be a big deal to some people). I was told to come on here and poke around and ask questions for some answers.
Email:
I LOVE the stock/native email APP and cannot use GMAIL for business; however many emails do not shrink to fit the window like the GMAIL app or on my iPhone. I am really hoping we can figure this out
Google Voice:
Works amazing with google products and Google now but I am having an issue integrating it with HTC apps or other 3rd party apps.
Home/Back Buttons:
As many now these do not light up until in a really dark room. I use my phone a lot at home with the lights dimmed while watching TV and they still do not come on.
Lock Screen:
The Lock screen requires a swipe up to answer calls, which happens a lot when I pull the phone out of my pocket (even with the stock locker and accessability turned off). I think I would like a different way (sideways) to answer a call and unlock the phone.
Bloatware/Stock apps:
There are a lot of ATT apps I do not want on the phone and do not want to use, but all of the HTC apps I do want for the most part
Click to expand...
Click to collapse
I don't recall an iPhone lighting up the home button.
Sent from my HTC One using XDA Premium 4 mobile app
Well my lights work so something isn't right with your phone ?
To try to help you fix some of the issues on your HTC ONE you can choose not to have the lock screen go to settings--->Personalize----> lock screen style and choose no lock screen. the back and home buttons light up when the screen is on push the power button on top. I never had that issue with the htc email client my emails fit to the screen but then again I flashed a custom rom on my phone. Not sure if that makes a difference tho.The bloatware you can uninstall go to your app draw and hold down the icon of the app and drag it to the top of the screen you will see uninstall drag it to there and its off your phone. I cam from an Iphone too and I also love the change. I am not sure if you are aware but if you have a google account and you sign in the app store will keep a record of all apps on your phone so if you want it back you can easily re install it. I hope that helps.
Just to clarify re: the bloatware, you cannot uninstall these if you're not rooted. However, you can disable the apps, which will also hide them in the app drawer.
Sent from my Nexus 7 using xda app-developers app
mattyd578 said:
To try to help you fix some of the issues on your HTC ONE you can choose not to have the lock screen go to settings--->Personalize----> lock screen style and choose no lock screen. the back and home buttons light up when the screen is on push the power button on top. I never had that issue with the htc email client my emails fit to the screen but then again I flashed a custom rom on my phone. Not sure if that makes a difference tho.The bloatware you can uninstall go to your app draw and hold down the icon of the app and drag it to the top of the screen you will see uninstall drag it to there and its off your phone. I cam from an Iphone too and I also love the change. I am not sure if you are aware but if you have a google account and you sign in the app store will keep a record of all apps on your phone so if you want it back you can easily re install it. I hope that helps.
Click to expand...
Click to collapse
No it doesn't help. You are completely wrong about almost everything.
Sent from my HTC One using Tapatalk 4
pameister said:
Hey guys, I am a long time iPhone user and I got a Black HTC one a few weeks ago and for the main part, I am LOVE the change and really love SENSE 5. I have messed around with the Apex Locker and some awesome UI's but would miss blink feed and some other SENSE issues.
I do have a lot of smaller issues I am hoping to figure out (which may not be a big deal to some people). I was told to come on here and poke around and ask questions for some answers.
Email:
I LOVE the stock/native email APP and cannot use GMAIL for business; however many emails do not shrink to fit the window like the GMAIL app or on my iPhone. I am really hoping we can figure this out
Click to expand...
Click to collapse
I actually find the native emaill app to be pretty sharp, but unfortunately it's too limited in functionality to do all the things i want for my corporate email. If you are a heavy Exchange user, I would recommend getting Touchdown. It's $20, but well worth it for detailed functionality in Exchange accounts. You will sacrifice much of the aesthic of the native mail app, though I find the function to be a worthwhile trade here.
pameister said:
Google Voice:
Works amazing with google products and Google now but I am having an issue integrating it with HTC apps or other 3rd party apps.
Click to expand...
Click to collapse
Could you be a little bit more specific with how you are hoping to integrate it and with which apps?
pameister said:
Home/Back Buttons:
As many now these do not light up until in a really dark room. I use my phone a lot at home with the lights dimmed while watching TV and they still do not come on.
Click to expand...
Click to collapse
I haven't had this issue. Do you run your phone in power save mode often? This could potentially have an effect on the lights, though I doubt it. I've never seen issues with mine, so perhaps it's your unit
pameister said:
Lock Screen:
The Lock screen requires a swipe up to answer calls, which happens a lot when I pull the phone out of my pocket (even with the stock locker and accessability turned off). I think I would like a different way (sideways) to answer a call and unlock the phone.
Click to expand...
Click to collapse
Not sure what to tell you here. I think it's just a function of Sense that you have to get used to. But I agree it can be a little tedious to deal with. I got used to it, though.
pameister said:
Bloatware/Stock apps:
There are a lot of ATT apps I do not want on the phone and do not want to use, but all of the HTC apps I do want for the most part
Click to expand...
Click to collapse
Just got to your settings > apps > all, and run down the list to disable as many of the att apps as you desire. most of them can be disabled, though none directly removed without root. disabling does the trick. you can also hide them from app drawer as mentioned above. I disable nearly all AT&T apps, among others.
Welcome to the One, it's a fantastic device. I have owned iPhones in year past but can definitely say you've made a great choice to convert. HTC has caught some slack recently with some tough financial times and sales figures, which is unfortunate because this phone is phenomenal. hopefully their big investment in (an odd Bob Downey, Jr) marketing campaign will help.
Hello fellow Xiaomi users,
I got my Redmi 5 Plus a few days ago, updated it only via the system update (no custom twerks yet).
Currently I have the stock Android 7.1.2 N2G47H and the stock MIUI 9.6.2.0 NEGMIFD.
I have a couple of questions about the phone and I would really appreciate your help:
1) Will this phone get an official Oreo update? I've read that there should be one, but couldn't find any official date mentioned.
2) Stock launcher - I noticed that I couldn't remove app icons from the stock launcher. Is there a way to do that, and customize it all together?
3) Nova launcher - Since I couldn't remove unneeded app icons from the stock launcher, I installed Nova. An issue I find with it though, is that I no longer get skype notification sound - only vibration. Also sometimes messenger fails to make a sound as well, but that happens fairly rare. Any idea on a fix for this? Or maybe recommend a better launcher, that works with the phone?
4)Viber - I am using dual SIMs. One personal, and one for work. I activated only my work viber, but as soon as I started using it, it transferred all my contacts in it. So now my personal and work contacts got mixed. Wouldn't be an issue, If I didn't use viber on my work PC, and I would rather my personal chats to not be there. Any suggestion on how to separate my contacts? Anyone else had this issue?
5) Alarm sound - I am not sure if this happened after I switched to Nova, but my alarm sound is really low. The phones speakers are quite good, but when it comes to the alarm its quite low. I can barely hear it and wake up
6) Freezing - Sometimes when I type in let's say messenger, the phone freezes for some reason, until I type the next letter. For example if I try to type the word "submarine", I can type "subma" but it will freeze on "subm", and when I type the next letter (r) it will spit out both of the last written letters "submar" and then continue to work normally. What can cause those freezes?
I would really love to hear your opinion on these points.
Thanks in advance guys
1) For sure, in the main miui site is indicated and if is there is a closed beta available then we can expect an official version.
2) Remove the icons from stock launcher will mean uninstall them, you can only move them to the next display and maybe group them.
3) Check if all permissions are granted for this launcher including device control and accesibility, also enable in Nova persistent notifications. I use stock launcher, I put my preferred apps in main desktop, the others just moved them to the right and using the app "My Drawer" from developer Ofir Miron, it´s the only that I found that keeps the same icon from any theme that I pick, the others look very ugly.
I´m rarely use the other points so I don´t know
SubwayChamp said:
1) For sure, in the main miui site is indicated and if is there is a closed beta available then we can expect an official version.
2) Remove the icons from stock launcher will mean uninstall them, you can only move them to the next display and maybe group them.
3) Check if all permissions are granted for this launcher including device control and accesibility, also enable in Nova persistent notifications. I use stock launcher, I put my preferred apps in main desktop, the others just moved them to the right and using the app "My Drawer" from developer Ofir Miron, it´s the only that I found that keeps the same icon from any theme that I pick, the others look very ugly.
I´m rarely use the other points so I don´t know
Click to expand...
Click to collapse
Thank you for the reply, I guess I will wait for the update for now, and experiment some more with Nova.
One more thing that came to mind - any way to use the proximity sensor to stop the phone for ringing or to answer calls? I had this options on other android phones - when the phone rings, and you bring your phone close to something (like your year) it picks up. Or when you flip it face down it stops the ringing. Any of these options available?? Can't find them so far.
surfistche said:
Thank you for the reply, I guess I will wait for the update for now, and experiment some more with Nova.
One more thing that came to mind - any way to use the proximity sensor to stop the phone for ringing or to answer calls? I had this options on other android phones - when the phone rings, and you bring your phone close to something (like your year) it picks up. Or when you flip it face down it stops the ringing. Any of these options available?? Can't find them so far.
Click to expand...
Click to collapse
You can find Flip to silence ringer in menu from stock dialer.
SubwayChamp said:
You can find Flip to silence ringer in menu from stock dialer.
Click to expand...
Click to collapse
Thank you, found it. Now let's hope that someone else can shed some light on the other topics as well. ^^