Hi
How is there a way tu use my computer internet on my Hero throught the USB connection ??
Thanks
I'm sure there is, but wouldn't be easier to use bluetooth or wifi connection for that?
like some el cheapo USB dongle with AP mode... or maybe to buy new modem with wifi... or... don't know. access point?
schlagg said:
Hi
How is there a way tu use my computer internet on my Hero throught the USB connection ??
Thanks
Click to expand...
Click to collapse
Do you mean use the Hero "tethered" as a modem for the computer? If so the answer (at least for UK Heros) is yes.
First of all make sure you have HTC Sync on your computer. Then do the following:
1 Make sure your phone’s data connection is turned on.
2. Connect the phone to the computer using the USB cable.
3. Press HOME > MENU, and then tap Settings > Wireless controls.
4. Select the Mobile network sharing check box.
@peterc10, I think the OP means the opposite (ie. tethering the Hero to a computer via USB), but I'm not sure.
Certainly, putting it on your wireless network (or getting one) would be an easier option, and it wouldn't require any cables. As a bonus, you can use your home internet from all round the house with the device.
@schlagg, any reason the wireless suggestion wouldn't work. Personally, I think it would be a lot easier to set up.
anon2122 said:
@peterc10, I think the OP means the opposite (ie. tethering the Hero to a computer via USB), but I'm not sure.
Click to expand...
Click to collapse
I wasn't sure either, hence my first question. I don't know whether you can do it the other way around, and I have wifi at home so don't need to anyway.
I guess we will have to wait for the OP to tell us which they meant.
anon2122 said:
@peterc10, I think the OP means the opposite (ie. tethering the Hero to a computer via USB), but I'm not sure.
Click to expand...
Click to collapse
yes
its the opposite
GPRS/3G disabled on the phone, and internet on computer
anon2122 said:
any reason the wireless suggestion wouldn't work. Personally, I think it would be a lot easier to set up.
Click to expand...
Click to collapse
no particular reason
just being curious
my wifi connection works well ...
but sometimes, i manage to go to some friends who don't have wifi
with my previous winmo, it was possible without any configuration, so just wondering if its the same here
i was actually wondering about the same thing..i dont have a wifi router and i dont think i'll be getting one soon anw since it wont "work" on my house... we have multiple floors and we prefer cables kinda
anw can i access the internet through USB?
No, this is not possible. The USB hardware in the Hero is that of a USB Slave (or USB Device, like a printer or camera.) In order for it to get internet access from this port, it would have to be set up as a USB Host, like your computer is. If you 'adb shell' into your phone and run "ls /dev/" you won't see any USB devices there.
If I'm wrong, I apologize, but I'm 99% sure this is the case.
EDIT: I think the best option would be to get a USB Bluetooth dongle for your computer. You can get one for like $15. Maybe less.
craig0r said:
No, this is not possible. The USB hardware in the Hero is that of a USB Slave (or USB Device, like a printer or camera.) In order for it to get internet access from this port, it would have to be set up as a USB Host, like your computer is. If you 'adb shell' into your phone and run "ls /dev/" you won't see any USB devices there.
If I'm wrong, I apologize, but I'm 99% sure this is the case.
EDIT: I think the best option would be to get a USB Bluetooth dongle for your computer. You can get one for like $15. Maybe less.
Click to expand...
Click to collapse
so if i get a usb bluetooth and connect it to my pc and open my phone's bluetooth i can get connection on my phone?:S
Shei77 said:
so if i get a usb bluetooth and connect it to my pc and open my phone's bluetooth i can get connection on my phone?:S
Click to expand...
Click to collapse
Nope. Quote from manual
"The phone supports the following Bluetooth profiles: Headset, Handsfree, A2DP, and AVRCP."
AFAIK none of those will enable you to use the computer as a modem. The first two are self explanatory. A2DP allows movement of stereo music files. AVRCP stands for "Audio/Video Remote Control Profile" which allows your phone to act as a remote control
So I was at home wanting to use the usb tethering on my TP2 (RHOD 400) running GBX0* and my laptop with win7x64. I would turn on USB tethering, plug it in, and the phone would just sit there like a bump on a log. Well that was no good. I poked around, and no one had an answer; so I tracked one down.
Seems that Windows 7 needs a driver to make it work right. It need an HTC Remote NDIS driver. I know what you are thinking. Where the heck could I get one of those. Well I have good news, and bad news. The good news is that HTC made one for us already which worked for me. The bad news is that it seems they bundled it in with 150mbs of other un-needed junk.
If you install their HTC Sync application, it will install this driver. I used version HTC Sync 3.2.20 I have not been able to find a stand alone version, for windows 7x64 but it could be out there somewhere...
This software is marked for xp-win7 so it may work with other versions too.
Now to get the tethering to work you have to disable the usb debuging, and then enable the usb tethering. Can't have both it seems. As usb debugging is off line so will be any adb stuff. So you will have to choose what you want more. Also usb tethering and usb storage do not get along either.
The good news is that installing this extra driver does not seem to break adb when tethering is turned off on the phone.
This may work as a solution for other HTC android devices too, as it seems somewhat generic.
As an extra bonus for me I can tether to the interwebs, and access my local wireless nas at the same time. No promises that you will be able to do that though.
oem.inf
wizardknight said:
So I was at home wanting to use the usb tethering on my TP2 (RHOD 400) running GBX0* and my laptop with win7x64. I would turn on USB tethering, plug it in, and the phone would just sit there like a bump on a log. Well that was no good. I poked around, and no one had an answer; so I tracked one down.
Seems that Windows 7 needs a driver to make it work right. It need an HTC Remote NDIS driver. I know what you are thinking. Where the heck could I get one of those. Well I have good news, and bad news. The good news is that HTC made one for us already which worked for me. The bad news is that it seems they bundled it in with 150mbs of other un-needed junk.
If you install their HTC Sync application, it will install this driver. I used version HTC Sync 3.2.20 I have not been able to find a stand alone version, for windows 7x64 but it could be out there somewhere...
This software is marked for xp-win7 so it may work with other versions too.
Now to get the tethering to work you have to disable the usb debuging, and then enable the usb tethering. Can't have both it seems. As usb debugging is off line so will be any adb stuff. So you will have to choose what you want more. Also usb tethering and usb storage do not get along either.
The good news is that installing this extra driver does not seem to break adb when tethering is turned off on the phone.
This may work as a solution for other HTC android devices too, as it seems somewhat generic.
As an extra bonus for me I can tether to the interwebs, and access my local wireless nas at the same time. No promises that you will be able to do that though.
Click to expand...
Click to collapse
I would like to share my solution. I modified the oem.inf file in the oem.zip(attached) ,by changing the manufacturer name and device id as given in the PC 's device manager(unknown device).
It should work for xp,seven,vista.
Yogesh1969 said:
I would like to share my solution. I modified the oem.inf file in the oem.zip(attached) ,by changing the manufacturer name and device id as given in the PC 's device manager(unknown device).
It should work for xp,seven,vista.
Click to expand...
Click to collapse
Does it conflict with ADB or fastboot?
Have you tested AirDroid? I am in disbelief of what it can do. I think seeing is believing and suggest everyone have a look.
Sent from my MB860 using Tapatalk 2
It's one of my must-have apps. Along with Unified Remote & TeamViewer. You might also want to check them out.
Tried it. It's a really cool idea, but ultimatively not useful to me. I realized that after I had it installed for a few days and, apart from the initial setup and testing, never reached for it.
Incorrect title.
Nothing to do with Webtop.....
jisse44 said:
Incorrect title.
Nothing to do with Webtop.....
Click to expand...
Click to collapse
Renamed to "AirDroid = Wireless Web access and remote view"
Sent from my MB860 using Tapatalk 2
Very nice app but it needs WiFi.
I'm usual to leave my Atrix in charge (via USB cable) during work but AirDroid needs always WiFi connection even if I'm already connected with cable.
I've used ADB.EXE (from Android SDK) to forward connection from PC-Host and Atrix-Android...in this way I can connect to AirDroid via "127.0.0.1ort" but if I shutdown WiFi the app closes all inbound connection EVEN localhost via USB cable!!! So I must leave WiFi connected all the day to use AirDroid.
Bad thing....
This is a network app, and it works exactly as intended. No point in complaining about something the app was never intended to do.
emandt said:
Very nice app but it needs WiFi.
I'm usual to leave my Atrix in charge (via USB cable) during work but AirDroid needs always WiFi connection even if I'm already connected with cable.
I've used ADB.EXE (from Android SDK) to forward connection from PC-Host and Atrix-Android...in this way I can connect to AirDroid via "127.0.0.1ort" but if I shutdown WiFi the app closes all inbound connection EVEN localhost via USB cable!!! So I must leave WiFi connected all the day to use AirDroid.
Bad thing....
Click to expand...
Click to collapse
Well, if it didn't need WiFi, it wouldn't be called AirDroid now, would it? CableDroid, perhaps? Or maybe TetherDroid?
ravilov said:
it works exactly as intended. No point in complaining about something the app was never intended to do.
Click to expand...
Click to collapse
LOL
Even our Atrix was released with Froyo and after this with Gingerbread, but most of ppl wants to have ICS on a custom ROM.
So your argument is superfluous: most of ppl uses something in a way it wasn't intended to one similar use.
emandt said:
LOL
Even our Atrix was released with Froyo and after this with Gingerbread, but most of ppl wants to have ICS on a custom ROM.
So your argument is superfluous: most of ppl uses something in a way it wasn't intended to one similar use.
Click to expand...
Click to collapse
If you can make something work in a way it was not intended to work, that's cool, good for you. But don't expect it and don't complain if it doesn't happen. That is all.
Should be easy as others have found this:
https://zepinventory.wordpress.com/2014/03/31/how-to-root-azpen-a727-tablet/
EDIT:
Must download the SDK for ADB drivers. No other generic ADB drivers worked. I tried a ton.
You can boot into stock Recovery by holding Volume+ when booting.
Google Root Genius. Worked like a charm on an AzpenA727 tablet. Had to try a couple of times but it was the simplest, quickest way to root. After rooting you'll have to go to the play store and get Root Checker and SU. To increase battery life get SetCPU which allows you to set CPU policy so that when the screen is off the cpu runs at a couple of hundred MHz, plus you can slow down the processor while it's in use also. Experiment to find the optimal settings between performance and battery life. You can also overclock the cpu but this may lockup the tablet. There are youtube videos explaining how to reset a locked up Android tablet.
I figured it out. I downloaded the SDK and used its drivers. Those were the only drivers that worked. None of my million ADB drivers worked in Android. So that did work. I actually manually pushed all the su files from adb shell. Just needed the missing link.
So follow the directions specifically.
Also, I'm rather impressed with the stock zippiness and battery life.
Microcenter is giving these away for $20. Worth every penny. I already have a Nexus 7 2013 and a HiSense Sero Pro. Couldn't pass up.
After I rooted. I installed Xposed and Gravity box. The screen sucks but I found lighter colors are better because the horrible viewing angles distort the darker colors. Changed the status/nav bar to white and its Much better.
sent from my Verizon G2
Thanks for the information folks. I just got one a few days ago from Microcenter as well. I was unhappy to find I could not set the External SD as the default download location for applications. Nor can I move apps to the external SD. I called customer service and was told the device was not able to do that because of how the developer set it up. Upon hear that I figured someone here if not a few would know how to do that. I'd really appreciate the information. Thanks
is there 4.4 for this tablet or any way to make it look like its 4.4
No 4.4 upgrade, but there's an app to make it look like it.
haldi15 said:
is there 4.4 for this tablet or any way to make it look like its 4.4
Click to expand...
Click to collapse
There's no 4.4 upgrade for it. If you install the Xposed framework and Gravity Box, there is an Android 4.4 KitKat app in the Play Store that claims to make it look like 4.4. I haven't tried it yet, and can't say how well it does.
The Xposed installer is here: http://dl.xposed.info/latest.apk
There's a thread on XDA Developers discussing a Gravity Box version for Jellybean here: http://forum.xda-developers.com/xposed/modules/app-gravitybox-v2-9-1-tweak-box-android-t2316070
There are a boatload of Xposed addons in the Play store.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Lexx Diamond said:
Thanks for the information folks. I just got one a few days ago from Microcenter as well. I was unhappy to find I could not set the External SD as the default download location for applications. Nor can I move apps to the external SD. I called customer service and was told the device was not able to do that because of how the developer set it up. Upon hear that I figured someone here if not a few would know how to do that. I'd really appreciate the information. Thanks
Click to expand...
Click to collapse
Yeah, limited System Memory on this device is the biggest PITA.
There's an app on the Play Store called FolderMount that looks like it might be able to address the problem. (At a guess, it's creating symlinks pointing to the external card.) A search for FolderMount reveals several similar apps.
I have FolderMount downloaded, but haven't played with it yet. I want to make sure I understand the implications before I fiddle.
Curious to see how you make out with the folder mount bit. I just picked one of these up from Microcenter with coupon to get it for $20 and was wondering the same thing... but I'd rather not be the guinea pig
P.S. Used method in OP link to root no problem (Kingo method)
DMcCunney said:
There's no 4.4 upgrade for it. If you install the Xposed framework and Gravity Box, there is an Android 4.4 KitKat app in the Play Store that claims to make it look like 4.4. I haven't tried it yet, and can't say how well it does.
The Xposed installer is here: http://dl.xposed.info/latest.apk
There's a thread on XDA Developers discussing a Gravity Box version for Jellybean here: http://forum.xda-developers.com/xposed/modules/app-gravitybox-v2-9-1-tweak-box-android-t2316070
There are a boatload of Xposed addons in the Play store.
---------- Post added at 02:16 PM ---------- Previous post was at 02:01 PM ----------
Yeah, limited System Memory on this device is the biggest PITA.
There's an app on the Play Store called FolderMount that looks like it might be able to address the problem. (At a guess, it's creating symlinks pointing to the external card.) A search for FolderMount reveals several similar apps.
I have FolderMount downloaded, but haven't played with it yet. I want to make sure I understand the implications before I fiddle.
Click to expand...
Click to collapse
frieked said:
Curious to see how you make out with the folder mount bit. I just picked one of these up from Microcenter with coupon to get it for $20 and was wondering the same thing... but I'd rather not be the guinea pig
Click to expand...
Click to collapse
Where did you get yours? In my case, they opened locations in Brooklyn and Queens in NYC, and the Brooklyn store was a convenient subway trip for me.
If FolderMount is creating symlinks (and it's hard to imagine what else it could be doing), it shouldn't be too dangerous. You can get a system mightily confused with symlinks, but what you want to do here is mount a directory on /mnt/extsd to an appropriate location in the root file system.
I have to look around some more, as FolderMount seems to be sparsely documented. I want to make sure I understand what it's doing.
The other thing I don't know yet is external keyboard support. The device doesn't have Bluetooth, so a USB keyboard would be required. The FAQ says it can't use one, but I don't know it that's a limitation of the factory install that can be addressed by rooting, or if it's a hardware issue and USB host mode simply isn't supported, (Like no Bluetoioth, that may be a "design to cost" move.)
The device is useful enough as is that I'll live if I can't use a keyboard with it, but it would be nice. If nothing else, it's a good way to learn about Android in preparation for the sort of device I plan to get down the road.
Meanwhile, I've been having fun, and it's certainly worth what I paid for it.
Agree, totally worth the $20 even if I use it for nothing else than letting the kids watch netflix and play angry birds.
Got mine at the Long Island Microcenter.
I also found this thread which talks about swapping the mount points of sdcard and extsd but I dunno if I'm ready to take that step
http://forum.xda-developers.com/showthread.php?t=2263436
DMcCunney said:
Where did you get yours? In my case, they opened locations in Brooklyn and Queens in NYC, and the Brooklyn store was a convenient subway trip for me.
If FolderMount is creating symlinks (and it's hard to imagine what else it could be doing), it shouldn't be too dangerous. You can get a system mightily confused with symlinks, but what you want to do here is mount a directory on /mnt/extsd to an appropriate location in the root file system.
I have to look around some more, as FolderMount seems to be sparsely documented. I want to make sure I understand what it's doing.
The other thing I don't know yet is external keyboard support. The device doesn't have Bluetooth, so a USB keyboard would be required. The FAQ says it can't use one, but I don't know it that's a limitation of the factory install that can be addressed by rooting, or if it's a hardware issue and USB host mode simply isn't supported, (Like no Bluetoioth, that may be a "design to cost" move.)
The device is useful enough as is that I'll live if I can't use a keyboard with it, but it would be nice. If nothing else, it's a good way to learn about Android in preparation for the sort of device I plan to get down the road.
Meanwhile, I've been having fun, and it's certainly worth what I paid for it.
Click to expand...
Click to collapse
Swapping mount points
frieked said:
Agree, totally worth the $20 even if I use it for nothing else than letting the kids watch netflix and play angry birds.
Click to expand...
Click to collapse
My use case is eBook viewer. I have a lot of eBooks. I had been reading them on a Palm TX (yes, I still use a Palm OS PDA), but a bigger screen and more storage capacity is nice. I use the Android version of FBReader, an open source program by a Russian developer. It handles both Mobi (Amazon Kindle) and ePub (B&N Nook, Kobo Reader) formats, and I have books in both forms. (It doesn't handle DRM, but I don't get DRM protected books.)
I use a beta Android port of VLC for video, with video files stored on the external card.
Got mine at the Long Island Microcenter.
Click to expand...
Click to collapse
Didn't know they'd open one there. Where is it on LI?
I also found this thread which talks about swapping the mount points of sdcard and extsd but I dunno if I'm ready to take that step
http://forum.xda-developers.com/showthread.php?t=2263436
Click to expand...
Click to collapse
Thanks for the pointer. I'll go and look.
I'm an old *nix admin, who started on AT&T System V Unix long before Linux existed, so I grasp the concepts, and I've done stuff like that on larger machines. I just proceed very carefully. I prefer not to shoot myself in both feet...
This one, it's been there for years: http://www.microcenter.com/site/stores/westbury.aspx
DMcCunney said:
Didn't know they'd open one there. Where is it on LI?
Click to expand...
Click to collapse
I might try the mount point thing tomorrow. In theory it shouldn't break too much since it wouldn't be touching the system partition.
DMcCunney said:
Didn't know they'd open one there. Where is it on LI?
Click to expand...
Click to collapse
Merrick Ave. in Westbury. It's been there for at least 10 years.
Got my tablet yesterday as well, but can't seem to get either my Linux box or my Windows laptop to recognize it in ADB.
frieked said:
I might try the mount point thing tomorrow. In theory it shouldn't break too much since it wouldn't be touching the system partition.
Click to expand...
Click to collapse
The question is what you'll gain.
The scarce resource is System Memory. There's 787MB of it, and 1GB seen as SDcard. That hack lets you vastly expand the area seen as SDcard, but that's not the problem.
With my current set of apps loaded, and everything that can live on the SDcard moved there, the A727 thinks I have 118MB of System Memory free, and 728MB of the SDcard. I need more System Memory, but I don't believe that hack will provide it.
I'm still figuring out how the tablet divides up resources. I already had a case where there was a Google+ app upgrade, but it wouldn't install without a Google Play Services upgrade, and that wouldn't install because there was insufficient system memory. (How much system memory it wanted wasn't mentioned.) The fix was to uninstall Chrome (which can't be on the card.) That freed sufficient system memory to let me install the Google Play Services and the Google+ updates. After that, I could re-install Chrome. (I use Firefox as my usual browser, so could live without Chrome if need be, and Firefox can be moved to the card.)
If I can implement a hack that increases System Memory, I'll be a happy camper.
---------- Post added at 02:45 PM ---------- Previous post was at 02:38 PM ----------
gotroot801 said:
Merrick Ave. in Westbury. It's been there for at least 10 years.
Click to expand...
Click to collapse
My S.O. used to live in Bellmore, but I haven't had cause to be on LI for years. I missed MicroCenter opening there.
Got my tablet yesterday as well, but can't seem to get either my Linux box or my Windows laptop to recognize it in ADB.
Click to expand...
Click to collapse
Which flavor of Windows? The rooting method I used apparently can't be done from Linux.
I grabbed the 32bit version of the Android SDK, but couldn't get Windows to recognize the tablet from XP. It claimed it couldn't find the software to install the drivers, even though they were where I pointed. I grabbed the 64 bit version of the SDK and tried again from the SO's Win7 laptop, and it worked. From there, I could use Kingo Root to root the device.
Rooted, now can't connect to Internet
Went yesterday the new Microcenter in Flushing (actually Kew Garden HIlls) and Got the A727.
It worked fine with the store's wifi. Rooted it this morning now can't connect to internet at all through my home wifi. Other devices connect fine and I get a good private IP address on the A727, but I get the message " web page not available" in the browser and no other app can connect to the internet .
I tried everything including resetting, unrooting, restarting, turning off developer, nothing works.
thanks
You're probably connecting to your network but not authenticating.
thecensor said:
Went yesterday the new Microcenter in Flushing (actually Kew Garden HIlls) and Got the A727.
It worked fine with the store's wifi. Rooted it this morning now can't connect to internet at all through my home wifi. Other devices connect fine and I get a good private IP address on the A727, but I get the message " web page not available" in the browser and no other app can connect to the internet .
I tried everything including resetting, unrooting, restarting, turning off developer, nothing works.
Click to expand...
Click to collapse
I don't think rooting has anything to do with it. My A727 connected fine with my home network before and after rooting. In your case, it worked fine at the store because they run an open network with no authentication required.
What router do you have, and what security do you use? In my case, it's a Belkin router, and I use WPA2 encryption.
If I had to make a guess, your A727 is connecting to your network, but your network wants you to authenticate with a password, and you aren't seeing it.
Tap Settings, and select Wifi. If Wifi is off, you'll be prompted to turn it on. When Wifi is on, the A727 will scan for networks and display those it sees in range. Do you see your network SSID? Tap on it. You ought to be able to get to a place where you can provide your network password and properly authenticate.
DMcCunney said:
I don't think rooting has anything to do with it. My A727 connected fine with my home network before and after rooting. In your case, it worked fine at the store because they run an open network with no authentication required.
What router do you have, and what security do you use? In my case, it's a Belkin router, and I use WPA2 encryption.
If I had to make a guess, your A727 is connecting to your network, but your network wants you to authenticate with a password, and you aren't seeing it.
Tap Settings, and select Wifi. If Wifi is off, you'll be prompted to turn it on. When Wifi is on, the A727 will scan for networks and display those it sees in range. Do you see your network SSID? Tap on it. You ought to be able to get to a place where you can provide your network password and properly authenticate.
Click to expand...
Click to collapse
I use connectify on Windows 8.1 as the internet source.
I don't think it's an authentication issue. When I deliberately enter a wrong password authentication takes forever and connectify says no cliet connected. when I put the correct password it connects almost emmidietly and says 1 client connected, but still not able to load web pages or have any other app connect to the internet.
Try using an actual wireless router
thecensor said:
I use connectify on Windows 8.1 as the internet source.
I don't think it's an authentication issue. When I deliberately enter a wrong password authentication takes forever and connectify says no cliet connected. when I put the correct password it connects almost emmidietly and says 1 client connected, but still not able to load web pages or have any other app connect to the internet.
Click to expand...
Click to collapse
Hmmm. So your Win 8.1 box connects directly to your ISP feed, and you use Connectify to create a wifi hotspot and the Windows box as a wireless router?
According to Techend, at http://techzend.com/create-ad-hoc-wifi-hotspot-windows-81/ "I have read that many Android phones do not support ad-hoc connections, created by tools like connectify.", and you might be running into one of those cases. My wifi router isn't creating an ad hoc network, and I had no problems connecting to it with the A727 before or after routing.
You may need to get an honest-to-God external wireless router instead of trying to get your Windows machine to serve the purpose. (I'd recommend that in any case - your machine should be behind your router, not serving as your router.)
DMcCunney said:
Hmmm. So your Win 8.1 box connects directly to your ISP feed, and you use Connectify to create a wifi hotspot and the Windows box as a wireless router?
According to Techend, at http://techzend.com/create-ad-hoc-wifi-hotspot-windows-81/ "I have read that many Android phones do not support ad-hoc connections, created by tools like connectify.", and you might be running into one of those cases. My wifi router isn't creating an ad hoc network, and I had no problems connecting to it with the A727 before or after routing.
You may need to get an honest-to-God external wireless router instead of trying to get your Windows machine to serve the purpose. (I'd recommend that in any case - your machine should be behind your router, not serving as your router.)
Click to expand...
Click to collapse
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often.
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect withouth a problem to it, but not the ad-hoc.
Like I said, you may need a real router
thecensor said:
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often
Click to expand...
Click to collapse
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can b used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect without a problem to it, but not the ad-hoc.
Click to expand...
Click to collapse
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
---------- Post added at 03:30 AM ---------- Previous post was at 03:19 AM ----------
thecensor said:
Yes, my 8.1 is connected to a cable modem via Ethernet. I don't need a router because I don't connect other devices that often
Click to expand...
Click to collapse
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can be used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Connectify can create an encrypted access point, so that's not the issue. my Galaxy note 2 can connect without a problem to it, but not the ad-hoc.
Click to expand...
Click to collapse
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
DMcCunney said:
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can b used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
---------- Post added at 03:30 AM ---------- Previous post was at 03:19 AM ----------
I have multiple devices connecting here: my desktop, my SO's laptop, a netbook, an ancient notebook on occasion, my PDA, the A727 tablet, and one or two other things once in a great while. The desktop, notebook, and netbook connect via CAT5 cable to ethernet ports on the router, and the laptop and tablet connect via wifi.
But I'd want the router even if I just had one device. As a matter of security if for no other reason, I want my interface to my cable provider to be separate from the machines that connect through the interface.
While it's all very well Win8.1 machines can be used that way, I wouldn't want to. (And I multi-boot Linux, too, which leaves solutions like Connectify out even if I were inclined to use them.)
Which is why I think you may need to use an actual router if you want to connect with the A727. Routers are cheap. You can get a serviceable one for about the price of a Connectify Hotspot license. My Belkin N150 was under $40.
Click to expand...
Click to collapse
Thanks, but nevertheless I'd like a solution to this issue. I will try with a regular hotspot to see if that makes a difference.
Question: USB Wifi - how do you get it to work??
=================================================
I just tried the newest Android RemixOS as of Jan 25 2017. I read some of what you all have here and I was very impressed with your knowledge, however I have no idea what some of this stuff means even though I can regedit.exe and toss code around in C# and VB.NET and use Framework like a boss. Meaning, if I had the exact steps to fix my problem that would be GREAT!
* My problem, I only have a USB Wifi, my USB keboard and mouse work fine but RemixOS Marshmello will not work together. It just shows the Wifi off and when I click the toggle button to turn it on it just scans. Advanced under Wifi has nothing I can work with.
I heard that the problem -used- to be that USB was not supported at all but my keyboard and mouse work. So is there anything I can do to make the USB Wifi work, I have no internal Wifi for this computer -or- is that the best solution, just get an internal Wifi board that supports 2.4Ghz (which I read somewhere was the other problem, only 2.4Ghz is supported). Also I have no access to my Landlords Wifi so I am unable to play around with it.
Follow up Question: What is rooting and why is it better and why doesn't RemixOS just make everything rooted (since it sounds better and everyone wants RemixOs this way)? Rooted sounds to me like its, "written in stone" but it sounds like it makes it so people can get access to things?
** I already installed RemixOS Jan 2017 version if I have to Root do I uninstall RemixOS first, if so how do you install it from your PC if it made your system into a dual boot?
** Or do you all mean uninstall RemixOS then edit the ISO and put the mentioned code for init() into the init.sh file? is that the Trick?
*** Additionally for anyone that doesn't understand what I said above cuz I am sure I am clear as Mud on my questions. My Wifi is a stick, that is attached to a USB cord that then goes into the Back of my computer into a USB 3.0 port. I have no internal Wifi board and the motherboard is 6 years old and doesn't have much integreated into it except sound, maybe grafx VGA but I installed a RX 780 for a good graphics card.
*** I also forgot to mention it dual boots just fine, just no internet. Thx!
same here, im using TL-WN723N_V3 and wifi always keep searching.
helppp
here the pic
winpoincom/cara-dual-boot-windows-dan-android-melalui-remix-os/
insert . before com
Generally, wifi adapter connected using USB should work. It maybe a problem with particular adapter type not having driver in kernel or something like that. You can check output of "dmesg" command if it says something about the adapter. For example I'm using quite cheap usb wifi adapter Tenda (W311U+) and it works directly without any intervention.
pakarem said:
Generally, wifi adapter connected using USB should work. It maybe a problem with particular adapter type not having driver in kernel or something like that. You can check output of "dmesg" command if it says something about the adapter. For example I'm using quite cheap usb wifi adapter Tenda (W311U+) and it works directly without any intervention.
Click to expand...
Click to collapse
here my dmesg,