Related
I recently started having problems in my new Startrek and a with a very new 2GB sandisk microSD.
The phone sometimes can't see the contents of the card Images,Songs..etc .it shows only the thumbnails and file names ,but when i try to open ,edit,rename ..etc
any content of the storage card it gives "UNKOWN ERROR" with a random code.
I have to reboot "soft Reset" for the phone to correctly see the card contents .afer a few minutes , the problem comes back again .
i tried to use different memory cards, anothe 1 Gb microSD card ,and 256 mb microSd Card . But NoWay .. the same Issue ..
Notes :
1- i had installed the latest official rom again on the device .
2- My memory is a fat32 system .
Anyone else faced this problem .. ? any Solutions ?
Please Mates , try to help me ASAP as u can . if it's a Manufacturing issue , i will try to return the device back to the company.
My wishes and Regards,
Eng.Ghazall
that is hardware (Cingular 3125) problem
Oh Really !
are you sure my friend ?
Sorry , but can you tell me what is (Cingular 3125) " ?
Thank you So much my friend , So that i have To Get a new one "replace" from the Manufacturer ?
because it is dead..
Thank you so much Mr.Expert
My Regards.
Ghazall said:
Sorry , but can you tell me what is (Cingular 3125) " ?
Click to expand...
Click to collapse
Oh, sorry, i mean a StarTrek. Cingular 3125 is an american version of StarTrek.
btw, my brother have your problem with his startrek (with Kingston 2gb microsd card) too. thats hardware problem. But my startrek (with 2gb SanDisk microsd) works good.
Hi Erofich ,
thanks alot for your Nice reply ,
after reading too much threads and googling the problem , i discovered that this problem from the place of the memory stick "hardware problem"
so that i but a slim paper between the SIM card and the memory stick to press the memory into inside and make it stable in the place . i did that from 4 hours , and it is still Works Great Till now.
anyway , i will return back my device when i come back to my home country ..it's still under warrenty !
Thanks all Guys.
My Regards.
Thanks Ghazall, I put 1 small piece paper between memory and sim card, it's work well. till now my kingston 2gb memory card is readable.
Just played with it today and already feeling very limited . So came right here to XDA to root / install custom rom.
Many tutorials seems to be based on using SD card, i dont own one right now , I have a microSD card for my Xperia X10 , but its currently in use and has data/apps in it , so i cant format it . Is there a way to root / install CWM / Install CM 7 without SD card ?
Also if I am to buy a microSD card , which one to get ? i mean i am not going to store videos on my NT , so will a 4GB be sufficient ?and what class should i buy ?
Also why is it taking long time to charge from laptop / USB ? I cant use wall charger for now , since i dont have a converter yet. is there a way after rooting / installing CM7 to better the USB charging ?
naveen_reloaded said:
Just played with it today and already feeling very limited . So came right here to XDA to root / install custom rom.
Many tutorials seems to be based on using SD card, i dont own one right now , I have a microSD card for my Xperia X10 , but its currently in use and has data/apps in it , so i cant format it . Is there a way to root / install CWM / Install CM 7 without SD card ?
Also if I am to buy a microSD card , which one to get ? i mean i am not going to store videos on my NT , so will a 4GB be sufficient ?and what class should i buy ?
Also why is it taking long time to charge from laptop / USB ? I cant use wall charger for now , since i dont have a converter yet. is there a way after rooting / installing CM7 to better the USB charging ?
Click to expand...
Click to collapse
If you don't have an SD card to work with, you could get root with this method:
http://forum.xda-developers.com/showthread.php?t=1354487
Flash CWM with this app:
http://forum.xda-developers.com/showthread.php?t=1458630
And download CM7 from here:
http://forum.xda-developers.com/showthread.php?t=1481826
Everything would be done internally.
As for the USB charging, it seems you're stuck with the slow charging until you get the adapter.
Cant able to install TGPS_installer.apk , it says "For security reason ,this installtion is blocked .. Blah Blah Blah..."
I am on 1.4.1 Firmware
naveen_reloaded said:
Cant able to install TGPS_installer.apk , it says "For security reason ,this installtion is blocked .. Blah Blah Blah..."
I am on 1.4.1 Firmware
Click to expand...
Click to collapse
Oh, didn't know what version you were on. This method does not require you to format your SD card, but you'll need to use it:
http://forum.xda-developers.com/showthread.php?t=1466583
Using a new SDCard (not one you have info stored on) make a new MSDOS partition table and add a 50 MB FAT32 partition as the first primary partition. Then make sure you enable to boot and lda flags.
Click to expand...
Click to collapse
But here it says to create a partition using gparted , IIRC after doing all partition , Gprated will erase the card and do the partition from the beginning ..
I have linux mint 12 as dual boot , I can use it there for partitioning.
Thanks a mil for helping me out
If your only gonna keep books and magazines then a 4gb card should suffice.. Movies and games will need a bigger card.. I got a 16 gb transcend class 10 from flipkart for Rs.1600.. its decent for that money.. oh and if you plan to run cm7 from externel sd card, you should know, the image itself is 4gb..
satan89 said:
If your only gonna keep books and magazines then a 4gb card should suffice.. Movies and games will need a bigger card.. I got a 16 gb transcend class 10 from flipkart for Rs.1600.. its decent for that money.. oh and if you plan to run cm7 from externel sd card, you should know, the image itself is 4gb..
Click to expand...
Click to collapse
can you post the link to flipkart which you bought ?
image is 4gb ? :O , i would better run it from internally.. (280 MB right ? )
Have you reclaimed the B&N reserved space ?
Also which converter are you using for power supply ?
Hi there guys.
I have an xperia neo.
I got a new 32GB sd card. I first tried it on a nokia n8 phone and it worked really well... video playback, hd recording, music playback and more..
Then I put it in my neo, formatted it from inside the phone, then I copied a rom zip to it. I went into CWM and didn't accept installation of the zip.. it said (bad) installation aborted.
After lots of research, I put my old 8GB card into the phone and installed the zip from it, and it worked like a charm. After that.. I put the 32 GB back into the neo and transfered a couple of movies to it. When I created a new folder and copied the movies to it,... they didnt appear on the phone and neither did the folder they were in.
So I copied them to the root of the sd card and tried to play them with "rockplayer lite", "mxplayer" and "Vlc". Only one video played well (RM format) while all the others didnt work (AVI format 700MB movies).
Also tried "1.5GB avi movies"... didnt work. "MKV movies"... didnt work.
I thought it might be a codec problem or something like that, so I put an old 2GB card in the phone, put movies on it and tried... they all worked :cyclops:
I am really confused right now.. cuz this is my first android... I used to have an iphone, but I sold it and got this one cuz I heard it would be a lot better to have an android. btw, my iphone was 32GB, so I liked this one to be 32GB too
Any help appreciated.
Thanks.
I also using 32GB MicroSD SanDisk Ultra. It works fine on my Neo, everything can be run and installed.
It just does not fast like their said write up to 10MB/s read up to 300MB/s =.="
You may need to try use the 32GB on the other phones to see it works well or not..
Try to format it using SDFormat utility (google)
& check again, maybe its due to bad formatting ?
Who Manufactured this card and what class ??
I use 32Gb A-Data Class 10 couple of months now and had no problem on 2.3.4, 2.3.6, 4.0.3, 4.0.4.
Try to test card with h2testw in card readrer
xywtez said:
Who Manufactured this card and what class ??
I use 32Gb A-Data Class 10 couple of months now and had no problem on 2.3.4, 2.3.6, 4.0.3, 4.0.4.
Try to test card with h2testw in card readrer
Click to expand...
Click to collapse
using samsung 32GB Class 10, no problems at all with whatever Version !
2 partitions, first is for Data (FAT32) and second is Swap !
greetings
drafha said:
I also using 32GB MicroSD SanDisk Ultra. It works fine on my Neo, everything can be run and installed.
It just does not fast like their said write up to 10MB/s read up to 300MB/s =.="
You may need to try use the 32GB on the other phones to see it works well or not..
Click to expand...
Click to collapse
I already tried it on a nokia n8 and it was flawless.
Btw, does ur memory card work fine with movies and videos playback?
zmbutt said:
Try to format it using SDFormat utility (google)
& check again, maybe its due to bad formatting ?
Click to expand...
Click to collapse
I already did before posting, but it didn't make any difference
xywtez said:
Who Manufactured this card and what class ??
I use 32Gb A-Data Class 10 couple of months now and had no problem on 2.3.4, 2.3.6, 4.0.3, 4.0.4.
Try to test card with h2testw in card readrer
Click to expand...
Click to collapse
I have absolutely no idea... but here is what's written on it:
"Micros SD HC Class 10 32GB"
About the testing, I will get a reader in about 9 hours from now and will test it and reply here.
CooSeeS said:
using samsung 32GB Class 10, no problems at all with whatever Version !
2 partitions, first is for Data (FAT32) and second is Swap !
greetings
Click to expand...
Click to collapse
Thanks for ur suggestion.
If all fails, I will have to sell the card, wait for more money and then buy one like urs.... but I will be severely disappointed
i assume a bad ' Format '.
i used this tool for formatting the card with W7 64bit !
http://www.partitionwizard.com/free-partition-manager.html
make sure you run this Program as ' Administrator ' with W7 !
!!! this Won't work with XP !!!
and here's a mini HowTo, maybe it'll help.
http://www.youtube.com/watch?v=goevC84QEII
my advice, Don't buy any kind of ' Cheap + NoName Hardware ', even if it says ' Class 10 ', etc... !
greetings
have you tried to format sd from recovery?
CooSeeS said:
i assume a bad ' Format '.
i used this tool for formatting the card with W7 64bit !
FREE PARTITION MANAGER
make sure you run this Program as ' Administrator ' with W7 !
!!! this Won't work with XP !!!
and here's a mini HowTo, maybe it'll help.
YOUTUBE LINK
my advice, Don't buy any kind of ' Cheap + NoName Hardware ', even if it says ' Class 10 ', etc... !
greetings
Click to expand...
Click to collapse
I will try this program and respond to you.
Advice taken :fingers-crossed:
bonzi1994 said:
have you tried to format sd from recovery?
Click to expand...
Click to collapse
I have tried that one time yea, and still the same problem persists.
sallam94 said:
I already tried it on a nokia n8 and it was flawless.
Btw, does ur memory card work fine with movies and videos playback?
Click to expand...
Click to collapse
Try to format your MicroSD from your Neo.. There will be a different format your MicroSD from PC and from your phone..
Mine, works fine. I just found when playing .mkv file using MX Player sometimes the sound lost then I've set the player to be hardware render but on some(or maybe all) .mkv video it will change back to software render, I found the sound lost only when on software render. But I don't think if it caused by the MicroSD..
drafha said:
Try to format your MicroSD from your Neo.. There will be a different format your MicroSD from PC and from your phone..
Mine, works fine. I just found when playing .mkv file using MX Player sometimes the sound lost then I've set the player to be hardware render but on some(or maybe all) .mkv video it will change back to software render, I found the sound lost only when on software render. But I don't think if it caused by the MicroSD..
Click to expand...
Click to collapse
Thanks for the reply bro.
I will try hardware renderer..... But the problem is, it worked on software renderer on another 2GB memory card :crying:
In my opinion the best tool for formatting your as card is the sd card format tool from Panasonic.
It offers special options for sd cards while formatting.
Maybe an option to try.
Send from my Neo V via Jelly Sandwich 7.4 and night elf 1.5 using Tapatalk 2
Can you link it...pls ?
Sent from my Xperia Neo V using Tapatalk 2
motorazrv3 said:
In my opinion the best tool for formatting your as card is the sd card format tool from Panasonic.
It offers special options for sd cards while formatting.
Maybe an option to try.
Click to expand...
Click to collapse
Will try now and respond
Ghostfreak NB said:
Can you link it...pls ?
Click to expand...
Click to collapse
I believe this is it:
https://www.sdcard.org/downloads/formatter_3/sdfmt3_1.zip
1. DID YOU TEST THIS CARD WITH H2TestW ???????
if NO than do it ASAP you dont know who is manufacturer of this card and we dont know from where you took it, so this card can be fake if seen a lot of memmory cards that had 32GB sign on them but were 2GB cards.
So before you Format it for a million times with million tools TEST it for capacity !!!!!
And how much data you had on this card when tested it in nokla ??
xywtez said:
1. DID YOU TEST THIS CARD WITH H2TestW ???????
if NO than do it ASAP you dont know who is manufacturer of this card and we dont know from where you took it, so this card can be fake if seen a lot of memmory cards that had 32GB sign on them but were 2GB cards.
So before you Format it for a million times with million tools TEST it for capacity !!!!!
And how much data you had on this card when tested it in nokla ??
Click to expand...
Click to collapse
Hi there bro..
I tested it and here is the result
Code:
Warning: Only 31982 of 31983 MByte tested.
The media is likely to be defective.
1.8 GByte OK (3910123 sectors)
29.3 GByte DATA LOST (61589013 sectors)
Details:0 KByte overwritten (0 sectors)
91 KByte slightly changed (< 8 bit/sector, 182 sectors)
29.3 GByte corrupted (61588831 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x0000000006b88008
Expected: 0x06b8800064cf8011
Found: 0x06b8800064cf8411
H2testw version 1.3
Writing speed: 9.52 MByte/s
Reading speed: 13.8 MByte/s
H2testw v1.4
I am guessing that is bad.... so what to do next?
sallam94 said:
Thanks for the reply bro.
I will try hardware renderer..... But the problem is, it worked on software renderer on another 2GB memory card :crying:
Click to expand...
Click to collapse
Try to set Player setting to be H/W+(local), I use this setting and play well when playing .mp4 file but when playing some(or maybe all) .mkv file it goes back to S/W render after a few seconds..
sallam94 said:
Hi there bro..
I tested it and here is the result
Code:
Warning: Only 31982 of 31983 MByte tested.
The media is likely to be defective.
1.8 GByte OK (3910123 sectors)
29.3 GByte DATA LOST (61589013 sectors)
Details:0 KByte overwritten (0 sectors)
91 KByte slightly changed (< 8 bit/sector, 182 sectors)
29.3 GByte corrupted (61588831 sectors)
0 KByte aliased memory (0 sectors)
First error at offset: 0x0000000006b88008
Expected: 0x06b8800064cf8011
Found: 0x06b8800064cf8411
H2testw version 1.3
Writing speed: 9.52 MByte/s
Reading speed: 13.8 MByte/s
H2testw v1.4
I am guessing that is bad.... so what to do next?
Click to expand...
Click to collapse
That means thay your "32GB" card is 2GB card with modded SPD. If you can: give it back to to place where you bought it, get your money back and buy normal memory card that hane Manufacturer logo on it and is from from valid source.
xywtez said:
That means thay your "32GB" card is 2GB card with modded SPD. If you can: give it back to to place where you bought it, get your money back and buy normal memory card that hane Manufacturer logo on it and is from from valid source.
Click to expand...
Click to collapse
I agree with xywtez. I have heard about quite a few cases like this one. Some cheap Chinese products/replicas I guess . This is the same case with some of the cheap china-market flash drives too. Hence, it's always a good option to buy a branded product from known good source. :angel:
xywtez said:
That means thay your "32GB" card is 2GB card with modded SPD. If you can: give it back to to place where you bought it, get your money back and buy normal memory card that hane Manufacturer logo on it and is from from valid source.
Click to expand...
Click to collapse
acemccloud1 said:
I agree with xywtez. I have heard about quite a few cases like this one. Some cheap Chinese products/replicas I guess . This is the same case with some of the cheap china-market flash drives too. Hence, it's always a good option to buy a branded product from known good source. :angel:
Click to expand...
Click to collapse
Thanks for ur help guys.
I will call the guy I bought it from and see what I'm gonna do and come back to yall. :fingers-crossed:
HELLO TO STAFF
i hv hcl me u1 tablet. and it is behaving weird. last time i try to install a iron man 3 game and wont install so i get it at my shop.
(actually it belongs to my kids).. i do all reset. and delete things but nothing is working
i go in recovery and wipe formatt .. but nothing is being deleted.. all thing is as it is.
no new thing is being copy or being deleted in it..
so i open it and try to short it out. rediculously i found one more sd card of 4gb inside tablet chip.
i remove and put it in reader . connect to pc. it shows 1.8gb total and free around 800mb.
i guess rest of part is rom part in sd card bcouse without that memory chip tablet is not booting up. i replace another 4gb and 8gb but nothing working..
and i put back that sandisk 4gb back in hcl chip and it boots up as regular ...
problem is it is not being formated or not being hard reset in recovery.. i use MPTOOL . i updated with it. but nothing working out for new game or installations
for me the only solution left is to replace that 4gb SANDISK sd card which might cotain rom part..
so how to make that vimicro disk to make tab work normaly...
i attach the photo of board with sd card installed..
i hope some HCL GUY can help me..
solved hcl me u1
problem sloved
by updating with mptool with new sd card of 8 gb. in boot mode without sd card than insert sd card
it takes lot time and two time factory reset .. but working now but ram is as low below 300 mb
any body hv problem with hcl me u1 with hanging restarting or anything is not installing and deleting
change sd card of your choise 8gb or more and install rom
any question can ask me i just solved it
regards
skhan
Similar problem in HCL ME V1, but no solution so far
Hi,
I have an HCL Me V1 tab. My problem is something similar to yours. I was copying an apk (FL Studio Mobile) and a folder related to it (extra downloadable contents) from my laptop to the tablet (from laptop to /sdcard/Android/obb). Basically I had downloaded the apk and dlc from Pirate Bay. I'm sure there was no problem with these files as I had not even run these files in the tablet when the problem started.
First my laptop got hanged, but somehow I disconnected the tablet safely. However after I rebooted the tablet, it got stuck in a loop in the boot screen. I tried resetting it but it did not work. Also for some reason I am not able to do a hard reset on that tablet. The device simply refuses. When I remove the external SD card, the device won't even start when I press the reset pin hole.
There is one peculiarity to my problem however. The power button has stopped working. I can only start the tablet by the reset pin hole. I am sure this is not a hardware issue as I am 100% positive the tablet did not experience any physical shock.
It is a rooted device with rooted apps. Android ICS 4.0.4, kernel 3.x.x.
I plan on doing exactly what you did, i.e. open up the device, get a new sd card, load the ROM on it and put it back in. However, can you suggest any other alternatives before I do that?
Thanks,
Pari
Thanks!
I once encountered the same problem exactly as you described, but the device was in warranty and the service center fixed it.
Now i know what was the issue.
Thanks for your efforts because the i believe that it will help everyone who owns it as it will encounter problems with the device as HCL fooled us everyone with this model.
hcl me u1 is acting like crazy.
Hello ,I'm Kaushik Chauhan.
i have hcl me u1 tablet.
it is behaving crazy.
I can't save data on it.
whenever I restart it ,it is reset.
I tried to do factory reset, but nothing is changed.
I have also opened it and take out that internal sandisk of 4 gb.
inserted it mmc reader and connect it to ubuntu.
however I am not able to mount it.
but I managed to view partitions on it.
to my surprize,
there are six(believe me) partitions.(thanks to DISK UTILITY)
1. maximum size 2.5 gb. which I see in.xplore.
2. system 700 mb
3. data 400 mb
4.tmp 40 mb
5. and 6 are unallocated (I think).
(I will upload screenshot of it.soon)
but I am not able to mount any of it.
that 2.5 gb is fat32 but when I tried to mount it I got some superblock type error.
what is the problem.
and why xplore (file manager) shows two sd cards each of size 2.5 gb.(and identical to one another in context of files and folder.)
however its spec says 4 gb.(I have not attached any external sd or pendrive)
so here is my sd card partitions::
1:: 2.6 GB FAT :: that is what i see in file manager:: I can mount it.
2:: 1.3 GB Extended :: What is it? . there is no option to Mount it in Disk Utility.(Only one option 'Delete Partition').
3:: 403 MB ext2 :: I cant mount it.
(Error :: "Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so" )
4:: 786 MB ext2 Userdata :: same as system ("Error is also same")
5:: 67 MB ext2 cache :: same as system ("Error is also same")
6:: 34 MB unknown :: only three option (Format Voulme,Edit Partition,Delete Partition)
7:: 34 MB unknown :: same as above
sam1skhan said:
problem sloved
by updating with mptool with new sd card of 8 gb. in boot mode without sd card than insert sd card
it takes lot time and two time factory reset .. but working now but ram is as low below 300 mb
any body hv problem with hcl me u1 with hanging restarting or anything is not installing and deleting
change sd card of your choise 8gb or more and install rom
any question can ask me i just solved it
regards
skhan
Click to expand...
Click to collapse
Thank you i finally reset my internal sd card..but as you said my tablet is very slow and always hang then turn off..is there any way solve this problem?
@cyberking147.and mixxskratch, pborah88
my tab is again corrupted and not being reset or copy data or delete data from it... may b the reason i found out is tab stays non used or on low charge bettery
or the poor quality of sd card which i replaced..
i am willing to replace with the original sandisk or the samsung class 8 or something best quality with some warranty....
slow tab >>>it may b due to sd card becoz this fools install rom on sd card. can you believe it?? i was shocked
i will post results when i replace another sd card of samsung class 8 of 8gb..
one more thing you can also extend your internal memory of tab by replacing the provided 4 gb.. 8gb will give you 5 gb of free internal storage..
this may help those whose mmc slot and usb are not working
regards
skhan
sory for late reply coz i dont see any notification in msgs
so sory
Thank You...I replaced my internal 4gig sd card of 8gig.still it;s hang and slow
mixxskratch said:
Thank You...I replaced my internal 4gig sd card of 8gig.still it;s hang and slow
Click to expand...
Click to collapse
did you check the ram..
do you know the ram before?
there are options in selecting ram ,
if you hv flashed rom with 512 ram selection it will b slower .
there are two models they(hcl) hv launched. 1 512mb ram and 2, 1 gb ram...
1gb ram was lilttle more speedy than of 512.
go to settings and apps and check ram in RUNNING...
NOT MUCH WE CAN DO WITH IT. COZ ITS REALLY OLDIE
TRY TO FLASH WITH 1GB SELECTION , IF YOU GOT BOOT LOOP. HANG ON HCL LOGO THAT MEANS YOU DNT HV 1GB RAM MODEL. YOU HV TO FLASH IT AGAIN WITH 512 SELECTION
EVEN ONE OF MY FRIEND HV ONE GB CONFIGURATION WRITTEN ON BOX AND 512 IN DEVICE..
REGARDS
SKHAN
sam1skhan said:
did you check the ram..
do you know the ram before?
there are options in selecting ram ,
if you hv flashed rom with 512 ram selection it will b slower .
there are two models they(hcl) hv launched. 1 512mb ram and 2, 1 gb ram...
1gb ram was lilttle more speedy than of 512.
go to settings and apps and check ram in RUNNING...
NOT MUCH WE CAN DO WITH IT. COZ ITS REALLY OLDIE
TRY TO FLASH WITH 1GB SELECTION , IF YOU GOT BOOT LOOP. HANG ON HCL LOGO THAT MEANS YOU DNT HV 1GB RAM MODEL. YOU HV TO FLASH IT AGAIN WITH 512 SELECTION
EVEN ONE OF MY FRIEND HV ONE GB CONFIGURATION WRITTEN ON BOX AND 512 IN DEVICE..
REGARDS
SKHAN
Click to expand...
Click to collapse
I don't know how to check the ram. If i use again the mptool can i change the settings to 1gig ram? and how to do it?
12 2828545
Hcl ME u1 hardware looks similar to BSNL penta is703c. I just installed the official stock rom of HCL u1 to my penta tab. IT does seem to work..
oh yeah, i changed SD card to 32 Gig...
using mp tool, try using different DDR settings.. (Check attachments)
mixxskratch said:
I don't know how to check the ram. If i use again the mptool can i change the settings to 1gig ram? and how to do it?
Click to expand...
Click to collapse
go to settings > application manager> slide to see running app. at the bottom u can find the ram and the free ram and used ram
the tab only can support 1g ram if it is build with that . some tab come with 512 and some with 1g.b
so try various selection in mp tool > go to ddr setting. select elpida or micron wich supports u that u will have to find out. and be patient after flashing dont do any fulish. if it does not work it wil go in boot loop . just hcl and nothing. than try other selection like elpida or micron.
to go in boot loader mode u need to remove mmc and data cable and than
insert data cable nd press power on button u find the disk iand vdfu driver will install and than put 4 gb or 8gb mermoy card and flash it
regards
skhan
HCL ME tablet U1
Sir,
My hcl tablet is behaving awkwardly. firstly, after every 4 to 5 weeks it starts hanging up and i have to send to centre to fix it. secondly, Everything gets stopped be it settings, gallery, file manager or anything and i have to factory reset it and loose every game i installed. But curiously this time i dont know what happened and i cant even factory reset it! it just reboots and nothing else. Even when i uninstall an app, it reboots again and what i see is that the app hasn't been uninstalled and it appears again! the only thing that works at its best is the calculator.
Suggest me what to do.
Hoping a reply as soon as possible
Thank you
-Yaagyanika
HCL me u1 WILL NOT RESET anymore..
Hey Everybuddy, ( Frusteted with HCL ME U1)
This is KAUSHIK CHAUHAN
I have solved the problem of it being reset evertime we restart it.
things you need ::
1 :: A new MicroSD card ( I prefer (actually used ) Sandisk Mobile Ultra 8gb Class 10).
I brought it from Flipcart for just Rs.340 .
2 :: Stock ROM for our tab , Dont download any other rom they have some performance issue
Here is Link :: xww.hclsupportservice.in/Drivers%5CFamily%5CTablet%5CCategory%5CHCL_ME_Tablet%5CU1%5CImage%5CU1_0421_Image.rar
3 :: A PC running windows.
After Having these 3 thing ....
Steps ::
1 :: take rear cover of tab , take that metal cover over circuit.
see that sandisk microsd 4 gb ?
that's the problem ! take it out.
and put new sd card there.
now fit rear cover again as it was .
DONT TRY TO TURN ON THE TAB
on to the computer ::
connect tab with pc via USB cable. (in Switched OFF state.)
U should see a new drive in my computer (dont open and close that popup window)
2 :: Extract file U1_0421_Image.rar
:: open mptool.exe ( I prefer run as Admin.)
:: U should see the message "1 device reddy".
if not Dont Worry .
3 :: then go to the setting on mptool.
select the "vortex.pak" for PAK File.
now the tricky part : Carefully
look at your tab specs ,
If it says RAM = 1 GB
then In partition setting set System(MB)=1024
and DDRtype = elpida 8bit 1024
If it says RAM = 512 MB
then In partition setting set
System(MB)=512
and DDRtype = elpida 8bit 512M
DONT TOUCH ANYTHING ELSE !
4 :: OK done ? then Save it .
5 :: now click on scan if it doesn't say "1 Device Reddy".
6 :: click on Update.
7 :: wait and let it complete.
8 :: now tab must be restart automatically. It will take some time for first boot so dont panic.
I hope u now have a working tab.
open apps and u will see "Market"
thats it !
Nowadays HCL is providing market app with new tab (I have not when i purchased it).
now it has market not play store
and it will not update itself.
so,
Find any android device with Google Play Store inbuilt.
open xplore on it (if it doesnt there just download it (nearly 2 mb))
in config set root = normal works on all device.
now go to /system/app
copy "vending.apk" file to sdcard and send it to OUR HCL ME U1 tab and install it .
after a network connection it will update itself.
and u can enjoy working latest play store.
thanks for reading..
Thanks a lot for your help
cyberking147 said:
Hey Everybuddy, ( Frusteted with HCL ME U1)
This is KAUSHIK CHAUHAN
I have solved the problem of it being reset evertime we restart it.
things you need ::
1 :: A new MicroSD card ( I prefer (actually used ) Sandisk Mobile Ultra 8gb Class 10).
I brought it from Flipcart for just Rs.340 .
2 :: Stock ROM for our tab , Dont download any other rom they have some performance issue
Here is Link :: xww.hclsupportservice.in/Drivers%5CFamily%5CTablet%5CCategory%5CHCL_ME_Tablet%5CU1%5CImage%5CU1_0421_Image.rar
3 :: A PC running windows.
After Having these 3 thing ....
Steps ::
1 :: take rear cover of tab , take that metal cover over circuit.
see that sandisk microsd 4 gb ?
that's the problem ! take it out.
and put new sd card there.
now fit rear cover again as it was .
DONT TRY TO TURN ON THE TAB
on to the computer ::
connect tab with pc via USB cable. (in Switched OFF state.)
U should see a new drive in my computer (dont open and close that popup window)
2 :: Extract file U1_0421_Image.rar
:: open mptool.exe ( I prefer run as Admin.)
:: U should see the message "1 device reddy".
if not Dont Worry .
3 :: then go to the setting on mptool.
select the "vortex.pak" for PAK File.
now the tricky part : Carefully
look at your tab specs ,
If it says RAM = 1 GB
then In partition setting set System(MB)=1024
and DDRtype = elpida 8bit 1024
If it says RAM = 512 MB
then In partition setting set
System(MB)=512
and DDRtype = elpida 8bit 512M
DONT TOUCH ANYTHING ELSE !
4 :: OK done ? then Save it .
5 :: now click on scan if it doesn't say "1 Device Reddy".
6 :: click on Update.
7 :: wait and let it complete.
8 :: now tab must be restart automatically. It will take some time for first boot so dont panic.
I hope u now have a working tab.
open apps and u will see "Market"
thats it !
Nowadays HCL is providing market app with new tab (I have not when i purchased it).
now it has market not play store
and it will not update itself.
so,
Find any android device with Google Play Store inbuilt.
open xplore on it (if it doesnt there just download it (nearly 2 mb))
in config set root = normal works on all device.
now go to /system/app
copy "vending.apk" file to sdcard and send it to OUR HCL ME U1 tab and install it .
after a network connection it will update itself.
and u can enjoy working latest play store.
thanks for reading..
Click to expand...
Click to collapse
Thanks a lot for your help... I could revive my HCL U1 tab I have inserted 16GB microSD card
about sd card and ram
not working in 8gb sd card and is there any way to get backn lost ram
and thanks for help
Storage problam
When i try to update my tablet it will disconnect on its own
what can i do????????
unable to flash hcl me u1
RAJWINDERS said:
When i try to update my tablet it will disconnect on its own
what can i do????????
Click to expand...
Click to collapse
Hi ,
same thing is happening with me. When I try to flash my u1 tab with mptool.exe,after 2-3 seconds it's givig a long beep and download error message is getting displayed .
plzz help anyone!!!!!!!!!!!!!!!!!
hcl me u1
how to install new rom in 8gb sdcard in hcl me u1
Hi i have tab a sm-t355y tablet and really after a debloted custom rom that better on performance and better if someone can help me out or make me one i well happily donate $$$ for your hard Work pls get back to me asap thanks
broyza said:
Hi i have tab a sm-t355y tablet and really after a debloted custom rom that better on performance and better if someone can help me out or make me one i well happily donate $$$ for your hard Work pls get back to me asap thanks
Click to expand...
Click to collapse
U can search How to make own rom in XDA
or
I need time to make one
surya sunkara said:
U can search How to make own rom in XDA
or
I need time to make one
Click to expand...
Click to collapse
Yea coukd u pls make me one ??
broyza said:
Yea coukd u pls make me one ??
Click to expand...
Click to collapse
I need a little time BTW whats ur baseband version
surya sunkara said:
I need a little time BTW whats ur baseband version
Click to expand...
Click to collapse
Hey, I'd like a good custom rom as well.
My baseband is T355YDOU1AOJ2
surya sunkara said:
I need a little time BTW whats ur baseband version
Click to expand...
Click to collapse
Hey mate thanks heaps my firmware is
PDA T355YDOU1AOK4
CSC T355YXSA1AOK2
Thanks so much mate how long will it take to make a custom rom???
broyza said:
Hey mate thanks heaps my firmware is
PDA T355YDOU1AOK4
CSC T355YXSA1AOK2
Thanks so much mate how long will it take to make a custom rom???
Click to expand...
Click to collapse
I have checked the whole forum and I found that Thundersky is making it for you:good::laugh:
surya sunkara said:
I have checked the whole forum and I found that Thundersky is making it for you:good::laugh:
Click to expand...
Click to collapse
Yes but hes busy and cant make it for a while would u be able to make one mate ??
broyza said:
Yes but hes busy and cant make it for a while would u be able to make one mate ??
Click to expand...
Click to collapse
I think i can
Mate how did manage to install cwn im not finding one
Hey mate how u going at making a rom?
There is a much easier way now.. You can convert the portable storage SDcard to an adoptable sdcard which merges with the system. Now originally converted the portable storage to adoptable thinking it would move more apps to the sdcard and leave more free space. But it in reality did not do much more than manually moving the apps to the sdcard. So I ended up with 1GB or so of free internal memory.. But all the memory free and how much memory was present was screwed up because it says I have like 64gb memory when I only have 16gb and 32gb so total 48gb.. And it only showed the free memory of either the internal or the sdcard. And no google program allowed me to move it to the sdcard.. So all that work and having to reinstall everything and add in the accounts and such were rather useless.. Other than to see that samsung does have the option to format something as portable or adoptable.. Using the ADB shell ofcourse..
here you can add part of the sdcard to the adoptable memory and the rest as regular sdcard memory.. Rather pointless actually other than the adoptable memory is encrypted and unreadable on the pc using a card reader..
Using the ADB shell in the command within a windows command window.. I use TCC which is a replacement command.com for windows from long ago and works like the unix shell.. Microsoft has changed the command.com to cmd.com now and you can bring it up by typing CMD into the search programs and files window.
Type sm list-disks and record the disk IDs that come up like disk:179,64
use the format sm partition DISK:TYPE:RATIO to change the type...
Enter the disk ID where it says DISK, TYPE is either ‘private’ to adopt the entire microSD card or ‘mixed’ to use a portion of it. RATIO is only used if you select mixed. So a command would be something like: ‘sm partition disk:182:160 private’ to adopt the entire storage. Or ‘sm partition disk:182:160 mixed 50’ to adopt 50% of the microSD card.
sm partition disk:179,64 private
sm partition disk:179:64 mixed 50
also the command adb shell pm set-install-location 2
Which is supposed to set the location of the downloaded installs to the sdcard.. Which also does not really do much..
Now the command to turn that portable sdcard to adoptable..
adb shell sm set-force-adoptable true
would format the sdcard as adoptable.. Supposed to let you format it from the control panel and let you select portable or adoptable etc but not so.. You only get the option to format is as portable..
But internally it does have the option even if you normally cant get to it..
Well samsung pushed a new update from oct 18th and I got it a few days ago.. It was available for many months in like new zealand for some reason.. The oct update is named T355YDOU1BPJ1.. Since the last update was only a month before I was surprised as once its past an year samsung dont really care about such things.. so 2 updates in 3 months is kind of a shock..
Well anyway the update was like 440mb in size or the full mage is like 1.5gb.. It took over 15 minutes for it to re flash all the system files and over an hour to play with the apps.. so fully charge the device first..
I had the pixel launcher and it kept on crashing.. So went back to google now launcher which seemed stable.. And the tab was extremely slow to do anything.. For most things this is a rather fast tab even if the cpu is lame and slow at 1.2ghz only.. But for normal use it is fast for most things.. Sure wished I could go back.. I had it running for more than 2 days on a single charge by now.. Not really using it heavily but from a day it going to over 2 days is nice.. It gives almost 7-8 hours or playing or watching movies otherwise anyway.. Now the CPU was stuck above 50% and rebooting and all that after all the work was depressing..
But anyway now it is stable.. no reboots and speed seems to have come back to normal..
Now why would I post all this here.. Well that is because I just went and checked the free memory.. and WOW.. 3.5GB..... So it was migrating data off the internal memory to the adoptable sdcard memory before when it was acting up.. Yes that is an option now that shows up when you go to th storage internal memory option and once you use that ADB command to change it from portable to adoptable.. And it has given me an extra 2.5Gb of free memory.. How I dont know.. google still dont allow you to move their stuff to sdcard. Neither does microsoft and some others..
I suppose this new update actually moves the data part of those apps that does allow you to move them to sdcard to really move it to the sdcard like adoptable storage..
Well I dont know if this update also does the same thing with portable memory.. But before the data still stayed mostly in the internal memory even if the app could be moved to the sdcard.. OR the data was still in internal memory even after you moved it to the sdcard and there was a bug which never deleted the data from the android secure storage area and still took up space..
Apps like whatsapp wont let you move it to the sdcard now.. It could be moved before but the widgets would not work..
So those looking for debloated roms and such.. this might be a quick fix.. You can download the firmware yourself and use odin to flash it if you did not get the OTA.. I dont feel like voiding the warrenty on something that works so well.. Rooting and such is a real pain unless you want to spend a lot of time playing with things. But rooting and using titanium backup also lets you delete old system apps and replace it with new updates in the system partition and not use up valuable internal memory area.. Or it allows you to get rid of it entirely.. Just the Microsoft stuff takes up like a gb of space and they are useless apps all tied to online and their account and such. I suppose I am preparing myself for when the warranty runs out to root and get another 2gb of free space or so. by getting rid of the useless bloated apps but until then the 3.5gb of free internal memory will suffice. The sdcard has disappeared now from lock screen security and encrypt sd card says no sdcard present. and the entire memory is now encrypted.
https://samsung-firmware.org/all/
ps..my wife has a tab4 with a 64gb sdcard and even though it gives 2gb of free space out of the 8gb internal memory.. The facial recognization stay awake keeps storing useless pics and filling up the space even when the function is not used.. So every week have to delete 10,000 files to make space as it keeps saying no memory.. So samsung does not always fix bugs.. even though they pushed a security update earlier in the year for a 3 year old device.. it is like the little brother to this one and actually works much better if they fixed all the problems as this one is too big to carry around all day.. But this one is great when looking at maps travelling.
Hi
Hi how to root sm-t355y? Can i get the rooting files thankyou
Hey mate you go through this link "Don't forget to add this!!!"
rellybalilazerotcho said:
Hi how to root sm-t355y? Can i get the rooting files thankyou
Click to expand...
Click to collapse
[download.chainfire.eu/862/CF-Root/CF-Auto-Root/CF-Auto-Root-gt58lte-gt58ltedo-smt355y.zip
https:// This